Visakhapatnam Port Trust Tender
... More
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Visakhapatnam Port Trust - VPT Tender
Civil Works Others
Eprocure
Opening Date27 Nov 2024
Closing Date19 Dec 2024
Tender Amount₹ 14,64,74,340
Costs
EMD
₹ 15,64,743Document Cost
₹ 1,770Tender Fee
₹ 1,770
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_VPT_216678_1Bid Award Id
ViewTender No
IENG/CP/EE(CT and FH)/T/68, Dt.27.11.2024Tender Authority
Visakhapatnam Port Trust ViewPurchaser Address
-Website
http://https://vizagport.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
For Footings
12.95
11088
143594
... More
For Pedestals
21.38
11767
251590
... More
For base slab
5.4
11935
64451
... More
200mm thick side walls
307.2
3425
1052160
... More
150mm thick slab
36
1757
63286
... More
Plinth beam
6.01
13905
83570
... More
For columns
1.8
13856
24941
... More
Supply and placing of the V.R.C.C Design Mix Concrete M 30 grade corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry and including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water, Water proofing compound etc., to site and centring using Steel scaffolding pipes, jack props , Waller’s , Foot plates , brackets , steel centring plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrator, , curing etc.,as required and as directed by the engineer-in-charge complete but excluding cost of steel and its fabrication charges for finished item of work. All labour and materials.
-
-
-
... More
For Footings
61.95
12713
787603
... More
For Pedestals
5.76
13392
77142
... More
For Plinth Beam
162.14
15530
2518078
... More
For columns
27.95
15392
430216
... More
For 150mm thick slab
98
1793
175756
... More
For 100mm thick slab
285
1195
340752
... More
Providing and laying of Aerated (Cellular) Autoclaved Concrete Blocks - 600 x 200 x 230 mm conforming to IS:2185 (Part-3) - 1984 and IS: 6441-1972 of Compressive strength 3N/mm2 with Polymer modified Pre-mixed dry joining mortar including cost and conveyance of all materials to site, labour charges, like mixing mortar, scaffolding charges, constructing masonry, lift charges, curing etc., as required and as directed by the Engineer-In-Charge, complete for finished item of work
-
-
-
... More
- upto plinth level.
334.62
7417
2481980
... More
- for super structure
137.1
8056
1104502
... More
Supply and fixing of Sadarhali Stone Kerb 2.40 m length with 300 mm height, a bottom thickness of 100 mm up to a height of 275 mm and top width of 25 mm thick chamfering as selected by the Engineer-in-charge from approved source/ factory which is laid on existing CC Bed in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required and including cost and conveyance of all materials & labour charges including transportation from approved source, loading & unloading charges, as required and as directed by Engineer-in-charge, complete.
1130
1273
1439417
... More
Supply and fabrication of stainless steel framed structure by using Pipe section as per IS 6913 316 (corrosion resistant) Grade Sch-40s, for framed structure like Window Grills, Compound Wall Grills, Doors, Windows, Gates and cost of welding rods, power charges, labour charges for cutting, placing, welding and erecting in position and fixing by using chain pulley blocks, derek pole arrangements and cranes, cost & convenience of all materials including wastage to site etc., as required and directed by the EIC, complete for finished item of work
38514.87
768
29608691
... More
Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc., to site, and including all charges for mixing, laying concrete in position, curing, centring , shuttering etc., & lift charges etc., as required and as directed by the engineer in charge for finished item of work. All labour and materials.
291.46
7028
2048416
... More
Filling with dust in pathways with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., as required and directed by the engineer incharge complete for finished item of work. All labour and materials.
178.5
1213
216651
... More
Supplying and soling with stones including hand packing to proper camber, grouting with sand, compaction with power rollers including hire of roller, operational charges, tools and plant complete. All labour and materials.
265.5
856
227321
... More
Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Executive Engineer duly taking actual premeasurements before dismantling including all labour charges and materials etc., as required and as directed by the Engineer-in-charge, complete
-
-
-
... More
Flat stone
1000
36
36740
... More
Brick masonry
115.1
364
41932
... More
Stone masonry
81.6
870
70997
... More
Unreinforced cement concrete up to 15cm thickness
177.43
2173
385628
... More
Unreinforced cement concrete more than 15cm thickness
15.75
4346
68462
... More
Filling with carted coarse sand in play area, pathway, foundations bed and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operational, incidental ,labour charges, hire charges of T&P etc., as required and as directed by the EIC, complete for finished item of work.
605.55
1243
753183
... More
supply and fixing of Stone railing made with white sadarhalli granite of primary post size 100mm x 70mm with 2.6m length, secondary stone verticals of size 50mm x 75mm with a length of 2.45m and a connecting SS pipe size of 20mm x 40mm including loading, unloading and transportation. All labour and materials.
-
-
-
... More
Primary post
257
3900
1002300
... More
Secondary stone
1792
2900
5196800
... More
Supply , placing and transportation of sadarhalli granite seating benche of Length: 5 ft. Thickness: 4 inch, Seat Thickness: 3 inch, Back Rest Thickness: 2 inch as shown in the image etc., loading ,un loading transport and all operational, incidental labour & lift charges, complete for finished item- Ganite benches
21
19425
407925
... More
Dismantling and stacking structural steel sections such as joists, channels, angles, rails, flats and pipe sections etc., including stacking the useful materials and removing the debris within a lead of 50 m complete. All labour and materials.
3040.8
560
17050
... More
Dismantling unclimbable pale fencing or tie bar fencing or mesh fencing upto lengths of about 3 m including stacking the useful materials and removing the debris within a lead of 50 m complete.All labour and materials.
25
8
203
... More
Dismantling and stacking RCC and/or steel fencing posts or struts within 50 m lead including earthwork, refilling, dismantling of concrete etc., in the base, complete.All labour and materials.
100
149
14935
... More
Supply and installation of MS Portable Container of size 20' x 10' x 10' With Complete Insulation, wall and ceiling with GYPSM board Cladding & Glass Counter with Electrical Work with Bathroom and ACP cladding work as shown in the picture including all the necessary accessories. All labour and materials, complete.
1
510000
510000
... More
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge, with material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25. All labour and materials. (Payment will be made for the quantity of finished work based on levels only)
1149.19
2080
2390488
... More
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam as per specification including pre mixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density etc., as required and as directed by the Engineer-in-charge, complete. All labour and materials.
1149.19
2208
2537929
... More
Providing asphalt concrete hot-mix hot-laid wearing course as per Clause 509 of M/o RT &H's Specifications for Road and Bridge Works, including heating and mixing of coarse aggregate, fine aggregate, filler and binder in hot-mix plant, transporting the premix to site of work by tipper truck and laying with paver-finisher, rolling etc., complete. All labour and materials. (Grading 1 or 2 using 5% bitumen 60 / 70 and 3% Portland cement filler)
229.84
7189
1652538
... More
Preparation of sub-grade to the specified grade and camber, compaction with power roller, making good the undulations including excavating earth to an average of 22.5cm depth and disposal of surplus earth to a lead of 50 m including hire and operational charges of roller, tools, plant etc., complete. All labour and materials.
14097.17
15
220903
... More
Providing dense bituminous macadam hot-mix hot-laid base or binder course as per clause 507 of M/o RT & H's specifications for Road and Bridge works including heating and mixing of coarse aggregate, fine aggregate, filler and binder in hot mix plant, transporting the premix to site of work by tipper truck and laying with paver finisher, rolling etc, complete all labour and materials. (f. Grading 1 or 2 using 4.25% bitumen 60 / 70 and 2% Portland cement filler)
597.58
6037
3608039
... More
Clearing and grubbing the land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of the rubbish and stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. By Mechanical Means.
7196.75
2
18712
... More
Dismantling doors , windows and clear storey windows, Ventilators etc., ( wood or steel ) shutters including Chowkhats , architraves, hold fasts and other attachments etc., and stacking them within 100m lead including labour charge etc., and overheads & contractors profit complete for finished item of work
6
322
1935
... More
Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD - Material : Polypropylene) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick jamuna sand, including spreading, well ramming, consolidating, finishing smooth and artificial grass inbetween pavers etc., as required and as directed by the Engineer-in-charge, complete for finished item of work. All labour and materials.
1800
1732
3118140
... More
Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multichamberedframe with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook,zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent. Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)
6.5
6698
43537
... More
Providing and fixing factory made uPVC white colour fixed glazed Windows/Ventilators comprising of uPVC multi-chambered frame andmullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile),uPVC extruded glazing beads of appropriate dimension, EPDM gasket,G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plasticpackers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (ifrequired) shall be also fusion welded including drilling of holes for fixinghardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof siliconsealant over backer rod of required size and of approved quality, allcomplete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealant.Fixed Ventilators made of (small series) frame 47 x 50mm & mullion 47 x 68 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension.
3.6
6456
23242
... More
Pre construction Anti termite is a process in which chemical toxic to subterrean termites is apply/ inject into soil during early stage of building Construction 2. Treatement of soil Beneath the building and around the foundations conduct and chemical use as per BIS ‐ IS 6313 (Part ‐2) 2013 code specification & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entry 3. Imidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the colums , plinth beams (Back filling) walls and floor junction, external perimeters, along reatining wall @ 5.0 Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500mm around coulmns & 300mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for sparying, rodding etc. complete for furnished item of work as per the approval of the Engineer‐in‐charge
120
172
20640
... More
Flooring with Non‐skid red or white or any other colour as per the direction of engineer incharge full body Ceramic floor/wall tiles of size 300 x 300 mm and thickness between 7‐8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer‐in‐charge curing etc., complete for finished item of work. All labour and materials.
774.5
1157
896600
... More
Supplying and fixing SINGLE SHUTTER DOOR using Sal Wood Door Frame section of 100*75 MM is fixed to wall using Z Hand fast 300 MM long hold fast. Flush door shutters with solid bond wood block board type with commercial ply on both faces.:35 mm thick conforming to IS:2202 as per drawing including cost of Aluminium fixtures such as 3 Nos. Butt hinges 150mm long, 1 No tower bolt of 200x10mm dia, 1 No. Aldrops - 300 mm long, 1No. Latche-250mm long, 2 Nos. handles of 150 mm size including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 1.5m X2.1m)
6.3
5396
34000
... More
supply and fixing of HPL cubicles having size of 1300 x 1500 x 2000 mm and door size of 600 x 1783 mm including all the necessary accessories (steel and aluminium) and transportation as shown in the picture etc., as required and as directed by the engineer-in-charge. All labour and materials, complete.
15
25300
379500
... More
Supply and fixing of PVC false ceiling on MS/GI made skeleton framework.The frame shall be 24X 48mm MS tube section fixed along with the wall. The entire frame work shall be concealed with PVC section having overall dimensions of 6 X 250mm with a wall thickness of 1mm ± 0.3mm with tongue and groove system, provided with necessary arrangements for electrical connections, complete, for finished item of work.
120
1532
183840
... More
Supply and transportation of hammer/laminated 3 layer, 25mm thick toughened glass for placing on the panels of viewing deck floor and supporting members for ss railing panels including installation with the hardware as per the design specifications.
108
20666
2232023
... More
Supply of 32mm PPR dia Ball valve with all the necessary fittings at site of work. All labour and materials.
Makes: Any reputed brand.
15
227
3405
... More
Supply and Delivery of pump guard assembly with 2Nos SS Powder coated flange and 2Nos SS Rods with nut and colter pin at site of work. All labour and materials. Makes: Any reputed brand.
1
436
436
... More
Supply and erecting approved make centrifugal water pump with impeller, priming funnel cork, companion metallic flanges, with bolts and nuts and mounted on a common shaft of high efficient squirrel cage Induction motor totally enclosed and fan cooled type suitable to operate on 230V, Single phase, 50Hz.. 1440 RPM A.C.Supply of 1HP exculding suction / delivery pipe with nuts duly grouted on existing C.C foundation and bolts, spring washers of requisite size for monoblock motor and pump (IS : 9079) etc., as required and as directed by the Engineer-in-charge, all labour and materials, complete.
2
20141
40283
... More
Supply & Fixing of D.O.L Starter 250V, Single phase, 50Hz. With SS enclosure comprising of contactor with bi-metalic relay with necessary push buttons, etc., complete suitable for upto 3HP. All labour and materials.
Makes: Any reputed brand.
2
1150
2300
... More
Providing mural arts decorative theme on the walls for giving visual feel to the visitors, including overall through cleaning of surface of walls, painting one primary coat using first quality cement primary exterior variety and two coats of acrylic emulsion medium APEX ultima protek, weather proof exterior paintings as per directions of concerned officials of VPA and as per approved designs etc., including cost of all materials, tools, artist/painter charges, labour charges, scaffolding etc., and conveyance of all materials to site etc.,
2500
399
999500
... More
Providing skirting / cladding to the walls with soluble salt porcelain vitrified tiles (as per the design) screen printed and polished of thickness between 8 to 10mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Parts 1 to 15) of any colour and finish in all shades and designs, length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., as required and as directed by the Engineer-in-charge, complete for finished item of work. All labour and materials.
903.5
1215
1097834
... More
Excavation of hard rock or Bituminous road (BT) by chiselling for preparing pit for poles / stay / earth plates / laying pipes, including clearing the site by removing debris and making the site to original position. All labour and materials.
-
-
-
... More
a. Excavation of WBM
378
323
122094
... More
b. 75mm thick BT road cutting
630
103
65457
... More
Flooring with 16 to 18mm thick high polished / Flame Finished / leather finished granite stone slabs other than black and regular colours (i.e. of shades like paradise / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth or fixing on the MS framed structure with required fixtures etc., including cost and conveyance of all materials like cement , sand , water , steel if required, granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and cost of base coat complete for finished item of work. All labour and materials
112
4254
476491
... More
Snowcem or other equivalent quality water proof cement paint two coats of approved colour and shade to walls etc., on plastered and concrete surfaces including watering etc., complete. All labour and materials.
1200
42
51120
... More
Play area equipments for children - Supply and fixing of childern Play Equipment Curved VANQUISH-E: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. Curved structural posts of height 2.6 m, 3.0 m and 3.68 m are to be schedule HOT DIP Galvanized steel with a 114mm OD and 2.2mm (wall) thickness of the tubing. All post caps are to be cast from aluminum which is pretreated, cured and sandblasted, 114mm diameter, Handrail Dia 60 mm shall be an all-robotic welded unit, fabricated from galvanized steel pipes Twirl of size 3.0 m x 0.7 m, Stepping stones of size 2.8 m x 0.72 m, Twist net climber of size 2.75 m x 0.40 , Trigonal seat stone see saw of size 3.0 m x 0.36 m , Elliptical net climber of size 1.86 m and 8 shape hole climber are all robotic welded fabricated from 32 O.D. galvanized steel pipes Plastic Components [super thick plastic] shall be animated and shall be rotationally molded from antistatic, copolymer, virgin linear low density UV stabilized polyethylene, with color molded in and minimum thickness of 6 - 8mm. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as per EN1176 standards. All joints are Robotic welded. PLAY EQUIPMENT DIMENSIONS: 9.82 m x 7.84 m x 3.68 m. Supply & Fixing of Acura - E: Upright structural posts of height 2.4 m and 2.6 m are to be schedule HOT DIP Galvanized steel with a 114mm OD and 2.2mm (wall) thickness of the tubing and 1 square deck and 1 triangular deck made of steel 2.5 mm and rubber coating thickness of 2.5 mm. The poles are welded on to a base plate made from steel with 114mm inner diameter. Deck of size 1.45 x 1.45m and Staircase of size 1.50 m x 0.68 m are fabricated from 2mm perforated solid punched steel. Deck perimeter is precision pre punched for attachments. Decks are pressed, punched, and welded sand blasted and vinyl plastic coated to a thickness of 4mm. Handrail of height 2.21 m and Dia 32 mm shall be an all-robotic welded unit, fabricated from 32 O.D. galvanized steel pipes. The four step Leaf ladder Climber is made of Galvanized steel which is of size 866 mm x 700 mm x 2598 mm which is connected to an exit door which is also made of galvanized steel which is of size 990 mm x 32 mm x 1454 mm., Piped walls of Height 2.7 m are all robotic welded fabricated from 32 O.D. galvanized steel pipes for the outer pipes and 25mm O.D. galvanized steel for the inner parallel bars. The right curved monkey loop top rail is made of galvanized steel which is of Dia 48 mm and has dimensions as 2300 mm x 2278 mm x 2242 mm.Single monkey loop is made of galvanized steel and has dimensions of length 300 mm and Dia 32 mm. The chain climber is made of Galvanized steel which has cylindrical rods of length 260 mm and Dia 32 mm. There are 18 rods connected to chain links which are then connected to a primary rod of length 2500 mm x 32 mm which is connected to the poles.Straight slide of size 2.23 m x 0.82 m x 1.2 m,Panels, Plastic Components shall be animated and shall be rotationally molded from antistatic, copolymer, virgin linear low density UV stabilized polyethylene, with color molded in and minimum thickness of 6 - 8mm.Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as per EN1176 standards. All joints are Robotic welded. All components designed and manufactured to meet with EN 1176 safety standards. PLAY EQUIPMENT DIMENSIONS: 5.81 m x 4.92 m x 2.63 m. Make: Koochie/Hugo/Renus implex or equalent
1
3484511
3484511
... More
Thermoplastic road marking paint as per sec 803 of MORTH&H speed breakers & road markers as directed by the engineer-in-charge. All hire and operational charges of the equipment etc., all labour and materials.
1000
643
643340
... More
Providing solar studs as required and as directed by the engineer in charge complete. All labour and materials.
140
1814
254082
... More
Providing road studs as required and as directed by the engineer in charge complete. All labour and materials.
560
421
236146
... More
Supply and fixing of Solid rock black granite boulders of irregular shape having size of 7 ft height x 4 ft width including transportation loading and unloading etc., as required and as directed by the engineer-in-charge. All labour and materials.
5
100000
500000
... More
Supply and fabrication of MS framed structure like Window Grills, Compound Wall Grills, Iron Doors, Windows, Gates, MS Frame for chain link mesh works ,Roof Trusses by using MS solid plate section as per IS 1730 , including cost of welding rods, power charges, labour charges for cutting, placing, welding and erecting in position and fixing, cost & convenience of all materials including applying a priming coat of red oxide paint and wastage to site, complete for finished item of work as required and as directed by the Engineer-in-charge.
11969.8
140
1676490
... More
Supply and fabrication of MS framed structure like Window Grills, Compound Wall Grills, Iron Doors, Windows, Gates, MS Frame for chain link mesh works ,Roof Trusses by using square / rectangular/circular MS hollow section as per IS 4923 and Angles as per SP:6(1) IS Hand book , including cost of welding rods, power charges, nut and bolts (whereever required) labour charges for cutting, placing, welding and erecting in position and fixing, cost & convenience of all materials including applying a priming coat of red oxide paint and wastage to site, complete for finished item of work as required and as directed by the Engineer-in-charge.
57473
133
7647932
... More
Supply and fixing of HPL (high pressure laminated) sheet of 6mm thick for cladding with all the necessary accessories including transportation etc as required and as directed by the engineer in charge, all labour and materials, complete.
-
-
-
... More
HPL sheet
139.25
4628
644521
... More
Transportation
2
5000
10000
... More
Supplying and fixing of aluminium composite cladding with skin material 0.5 mm thick aluminium sheet cover material natural polyethylene aluminium cladding panel fixed with extruded aluminium basis frame (50x25x1.5mm) angle cleats,weather sealants, rivets, GI brackets all as approved, using suitable bolts on structural steel work including necessary accessories complete in all respects including all scaffolding and labour charges etc., complete for finished item of work but excluding cost of structural steel fabrication, if any, ACP Cladding -4 mm thk, etc., as required and as directed by the Engineer-in-charge, complete.
520.55
2946
1533540
... More
Supply and fixing of pre painted GI sandwich panel roofing sheet of size 3' x 14' and 3' x 12' as per the design at site with 30mm thick including all necessary accessories etc., as required and as directed by the EIC, complete. All labour and materials.
-
-
-
... More
GI sheet - 3'x14'
5
850
4250
... More
GI sheet - 3'x12'
14
750
10500
... More
Transportation
1
2000
2000
... More
Supply and fixing of Aluminium channel letters with LED structure: imported acrylic letters at facing with 63mm (2½ inch) depth, 2mm imported acrylic sheet, letter walling with 4mm foam board. Inbuilt LED lights with power supply (AC to DC converter). English letters-26nos of size 440mm x 500mm and emblem - 1 no of size 600mm x 800mm with suitable thickness, with 2 years warranty etc., as required and as directed by Engineer-in-charge, complete. All labour and materials. (VISAKHAPATNAM PORT AUTHORITY and port emblem)
-
-
-
... More
English acrylic letters
104
4500
468000
... More
Emblem
4
15000
60000
... More
Roofing with corrugated G.I sheets 0.80mm thick fixed with G.I ‘J’ bolts & nuts 8 mm dia with bitumen & G.I limpet washers filled with white lead & including a coat of approved steel primer and two coats of approved paint on over lapping of sheets complete (up to a pitch of 600) etc., complete, excluding the cost of purlins, rafters, trusses including cost and conveyance of all materials , labour charges etc., as required and as directed by the EIC, complete for finished item of work in all floors. All labour and materials.
6
1200
7200
... More
Traffic Statutory Sign
Drg. No. - Refer design drawing 1.4aS, 1.4aG - Providing and fixing Non-illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge. All exterior signs should be manufactured considering harsh outdoor conditions, weatherproofing techniques and materials shall be used.
Sign Face: Providing and fixing sign face panels 3 mm thick Aluminium sheet fixed to sign structure. White retro-reflective vinyl pasted over edge to edge aluminium sheet. Graphics in plotter cut red Pantone 485C and black Pantone 6C exterior grade opaque vinyl pasted over white retro reflective vinyl. Size : 600 X 600 MM. All labour and materials.
20
11100
222000
... More
Pedestrian Directional Sign
Refer design drawing 1.3bS, 1.3bG- Providing and fixing non-illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-In-Charge. All exterior signs should be manufactured considering harsh outdoor conditions, weatherproofing techniques and materials shall be used.
Sign Face: Providing and fixing sign face panels 3 mm thick Aluminium sheet fabrication, Aluminium sheet fixed to sign frame. White retro-reflective vinyl pasted over edge to edge aluminium sheet. Graphics in plotter cut RAL 5013 exterior grade opaque vinyl pasted over white retroreflective vinyl.
Sign Frame: Providing and fixing sign frame 50 x 50 mm in M.S. square section hot dipped galvanized and P.U. Painted to match RAL 9006 as per drawing. Frame to be directly fixed to the sign structure. Frame to receive the sign faces."
Sign Structure: MS square post 75x75 and horizontal square sections 50 x 50mm, hot dipped galvanized and P.U. Painted to match RAL 9006. Post including welded MS base Plate and Gussets in 6mm thick MS Plate as per drawing with holes to fix it on holding down bolts anchored in concrete footing. The post shall closed with a 3 mm thick MS plate and parts kept unpainted to weld the sign structure as per the drawing to ensure a rigid connection at site. The entire post assembly shall be hot dipped galvanized and P.U. Painted to match RAL 9006 as specified and approved by the Engineer-In-Charge. The Post shall always be a single continuous element without any joints. Cost to include all activities and temporary props used for a perfect vertical in plumb installation, shim Plates for adjustment of levels and filling the gap with concrete slurry etc required for fixing the sign in an external location. Secret fixing methods should be used to fix parts together. 225x225mm size, 5 mm thick cover plate mounted in case the flooring is present. All labour and materials.
Foundation : Providing and laying foundation for the sign including its compaction and all activities like Excavation, PCC base layer, providing and fixing in position electrical connection wherever applicable and finished as per drawing. The item cost includes cutting and opening the floor finish at location, and making good the location to the match the original finish after fixing and installation of sign
Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws, rivets, bolts, washers, nuts, etc. complete as per drawing. Size : 2100 X 1300 MM
25
150000
3750000
... More
Vehicular Directional Sign - Pole Mounted
Drg. No. - Refer design drawing 1.3a-2S, 1.3a-2G - Providing and fixing non-illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-In-Charge. All exterior signs should be manufactured considering harsh outdoor conditions, weatherproofing techniques and materials shall be used.
Sign Face: Providing and fixing sign face panels 3 mm thick Aluminium sheet fabrication, Aluminium sheet fixed to sign frame. White retro-reflective vinyl pasted edge to edge over aluminium sheet. Graphics in plotter cut RAL 5013 exterior grade opaque vinyl pasted over white retro reflective vinyl.
Sign Frame: Providing and fixing sign frame 50 x 50 x 2 mm in M.S. square section hot dipped galvanized and P.U. Paint to match RAL 6006 as per drawing. Frame to be directly fixed to the sign structure. Frame to receive the sign faces.
Sign Structure: MS square post 125x125x4 and horizontal square sections 75x75x2.5mm, hot dipped galvanized and powder coated to match RAL 6006. Post including welded MS base Plate and Gussets in 6mm thick MS Plate as per drawing with holes to fix it on holding down bolts anchored in concrete footing. The post shall closed with a 3 mm thick MS plate and parts kept unpainted to weld the sign structure as per the drawing to ensure a rigid connection at site. The entire post assembly shall be hot dipped galvanized and P.U. Painted to match RAL 6006 as specified and approved by the Engineer-In-Charge. The Post shall be always be a single continuous element without any joints. Cost to include all activities and temporary props used for a perfect vertical in plumb installation, shim Plates for adjustment of levels and filling the gap with concrete slurry etc. required for fixing the sign in an external location. Secret fixing methods should be used to fix parts together. 225 x 225 mm size, 5 mm thick cover plate mounted in case the flooring is present.
Foundation: Providing and laying foundation for the sign including its compaction and all activities like Excavation, PCC base layer, providing and fixing in position electrical connection wherever applicable and finished as per drawing. The item cost includes cutting and opening the floor finish at location, and making good the location to the match the original finish after fixing and installation of sign
Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing. Size - 2100 X 1300 MM. All labour and materials.
14
135000
1890000
... More
Supply of precast concrete blocks for paving of M-35 grade and thickness not less than 60 mm for Light traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer's specification set over the 50 mm thick sand bed with hand roller compaction with joint neatly in homogeneous or heterogeneous pattern as the colour and pattern shall be as per the drawings furnished by the architect, including cost and conveyance of all materials like cement, sand, water, tiles, etc., to site including all operational, incidental, labour charges, laying tiles to required slope as directed by the Engineer- in-charge. Complete.
1612.12
836
1347861
... More
Carting away of excavated earth / debris to a lead of 10KM (the rate including conveyance charges, loading, unloading charges by Mechanical means ) including ideal hire charges of truck etc. as required and as directed by the Engineer-in-charge, and it including all operational, incidental ,labour charges, required tools, complete. All labour and materials.
214.95
243
52433
... More
Earth work excavation for foundations (Mechanical Means) for buildings in ordinary soils and depositing on bank for all lifts with an initial lead of 10m and depth up to 3m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., as required and as directed by Engineer-in-charge, complete.
210
136
28560
... More
Providing impervious coat to exposed RCC roof slab surfaces of sump , sump side wall, sump bottom slab, in side of septic tank , in sunken slabs etc. to required slopes with CM (1:3) prop. using screened sand 12mm thick mixed with integral cement water proofing liquid confirming to IS: 2645-2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm where ever necessary including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, , and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., as required and as directed by the Engineer-in-charge, complete.
343.2
475
163075
... More
Supply and fixing of Granite Gazebo of size 10ft x10ft x10 ft. and the size of pillers (4 nos): 8"x8", front, middle & rear slab thickness is 50 mm, Beam thickness (6): 70 mm, Ceiling Slab thickness: 20 mm. Small Fencing Pillars: 4 inch & 6 inch fixing as shown in the image etc., as required and as directed by the EIC, complete loading and unloading for finished item of work. All labour and materials.
4
225000
900000
... More
Supply & application of one coat water based cement primer of exterior grade II and two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site,and all operational, incidental, labour charges etc., as required and as directed by the EIC, complete for finished item of work in all floors. All labour and materials.
18
325
5851
... More
Supply and fabrication of stainless steel framed structure by using Pipe section as per IS 6913 304 Grade Sch-40s, for framed structure like Window Grills, Compound Wall Grills, Doors, Windows, Gates and cost of welding rods, power charges, labour charges for cutting, placing, welding and erecting in position and fixing by using chain pulley blocks, derek pole arrangements and cranes, cost & convenience of all materials including wastage to site and complete for finished item of work, as required and as directed by Engineer-in-charge, complete.
5252.94
698
3671122
... More
Supply and fabrication of MS framed structure like Window Grills, Compound Wall Grills, Iron Doors, Windows, Gates, MS Frame for chain link mesh works, Roof Trusses by using square / rectangular MS hollow section as per IS 4923 & Angles as per SP:6(1) IS Hand book, including cost of welding rods, power charges, labour charges for cutting, placing, welding and erecting in position and fixing, cost & convenience of all materials including applying a priming coat of red oxide paint and wastage to site etc., as required and as directed by the EIC, complete for finished item of work. All labour and materials.
740.78
131
97716
... More
Random rubble stone masonry in CM (1:8) prop(Cement:Screened sand) using Hard granite stone carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, Rough stone through stone, coarsed stones etc., from approved quarry, to site, including labour charges for cutting stones to required size and shape, mixing of cement, mortar, construction, curing charges for scaffolding etc., as required and as directed by the Engineer-in-charge, complete. All labour and materials.
12.96
5687
73706
... More
Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) (Fe 500 / Fe 500D grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., as required and as directed by Engineer-in-charge, complete. All labour and materials.
47855.28
97
4654883
... More
Carting away of excavated earth / debris to a lead of 15KM (the rate including conveyance charges, loading, unloading charges by Mechanical means ) including ideal hire charges of truck etc. as required and as directed by the Engineer-in-charge, and it including all operational, incidental ,labour charges, required tools, complete. All labour and materials.
3048.38
328
1001606
... More
Supplying and fixing with cobble stone of size of 100x100x100 mm and any colour of granite stone with hand cut edges / machine cut edges / thumbed edges of flamed / shotblasted finish in proper shapes, and designs as per the directions of Engineer in-charge and fixing in homogeneous or heterogeneous pattern as the colour and pattern shall be as per the drawings furnished by the architect or as per the directions of Engineer in-charge, set over base coat of 30 mm thick cement mortar (1:3) using screened sand over CC bed (1:3:6) already laid, including flushing with net cement slurry of honey like consistency spread @ 3.0 kgs per sqm and joints neatly it including cost and conveyance of all materials like cement, fine aggregate (sand) , water, granite cobble ,wastage etc., to site and including all operations, incidental labour charges such as laying Cement mortar, levelling , fixing cubes in approved pattern ,jointing and complete for finished item of work, as required and as directed by the engineer-in- charge complete. All labour and materials.
930.42
3431
3192522
... More
Providing cladding to wall with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black and regular colours, length equal to flooring slabs set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., as required and as directed by the Engineer-in-charge, Complete.All labour and materials.
416.4
4268
1777345
... More
Providing 0.5m wide Coping with 16 to 18mm thick High Polished granite up to 8'-00 (2.43 M) other than black and regular colours with borders and design as per the pattern approved by the Engineer-in-Charge , set over base coat of cement mortar (1:5) , 12mm thick using screened sand over the stone ,Brick masonry or CC bed already laid , including neat grey cement slurry of honey like consistency spread 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and cost of base coat etc., as required and as directed by the engineer-in- charge complete. All labour and materials.
79.5
5315
422583
... More
Plastering with textured pattern 12mm thick (wherever required as per the direction of EIC with all necessary accessories) in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, ,, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., complete. All labour and materials.
3080.71
616
1900767
... More
Providing and applying PMCC / Deco orient base or Equivalent exterior Texture ( borders and design as per the pattern approved by the Engineer-in-Charge ) with cement primer of exterior grade and two coats of acrylic emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for internal walls including cost and conveyance of all materials of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ textured paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, scaffolding charges, as required and as directed by the engineer-in- charge complete for finished item of work in all floors for external walls. All labour and materials. (Application of textured paint wherever required as per the direction of EIC with all necessary accessories)
2988.91
500
1497175
... More
Supply & application of one coat water based cement primer of interior grade-I and two coats of acrylic emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for internal walls including cost and conveyance of all materials to site, and all operational, incidental, labour charges etc., as required and as directed by the engineer-in- charge complete. All labour and materials.
109.8
236
25940
... More
Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., for finished item of work as required and as directed by the Engineer-in-charge, complete.
26.57
46
1235
... More
Hedge / shrub planting: Digging the trench of size 0.3 mtrs. depth, refilling with red garden soil including cost of red garden soil and farmyard manure at 4:1 ratio, internal transportation of plants, planting etc., including the application of fertilizers and pesticides etc., (@ 20 gms/pit/sqmt) and it including all operational, incidental, labour charges, required tools, complete all labour and materials, but excluding the cost of the fertilizers (@ 20 gms/pit/sqmt) and plant material etc., - unit 1 Sqmt of work, as required and as directed by Engineer-in-charge, complete.
664.95
591
393630
... More
Digging of 1x1x1 mtrs. pit, filling with soil mixture of red garden soil, farmyard manure at 4:1 ratio including internal transport, application of fertilizers and chemicals (@ 20 gms/pit/sqmt), internal transportation of plants and planting the plants etc., and it including all operational, incidental, labour charges, required tools, complete. (excluding cost of plant material, fertilizers and chemicals (@ 20 gms / pit/ sqmt)), as required and as directed by Engineer-in-charge, complete.
395
1886
745021
... More
Bed preparation for Korean/Mexican: Dressing the surface to the desired shape, laying of 150 mm. (6”) thick fine red garden soil, covered with a thin layer of 10 mm thick sand, watering, rolling (compacting to 4" thickness by hand roller), including the cost of red garden soil, sand and labour charges etc., for complete bed preparation and laying and ramming of lawn mats / rolls in proper position on existing prepared bed by internal transportation from dumped place, including cost of labour for laying, ramming by hand roller / demesha, internal transportation and watering etc., and it including all operational, incidental, labour charges, required tools, excluding cost of grass, fertilizers and chemicals etc., for 1 Sqm (Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral), as required and as directed by Engineer-in-charge, complete.
1785
379
677550
... More
Bed preparation for Ground cover / Flower beds: Digging the trench of size 150 mm. depth, and Formation of 150 mm. (6") thick of soil mixture at 3:1:1 ratio red garden soil, farmyard manure and river sand, application of fertilizers (@ 20 gms/pit/sqmt) by making smooth surface as per design including cost of soil mixture, filling of the soil mixture and internal transportation etc., and it including all operational, incidental, labour charges, required tools, complete. (excluding cost of plant material, fertilizers and chemicals (@ 20 gms / pit/ sqmt))-unit 1 Sqmt of work, as required and as directed by Engineer-in-charge, complete.
39.24
383
15040
... More
Supply & Delivery of topiary/trees/Palms/shrubs/lawn/ ground covers and specified plants as per directions of officer in charge at site including cost of plants plants of bag size 7" x 8" of plant height not less than 1.0 feet,
8" x 10" of plant height not less than 3.0 feet,
13" x 13" of Tree/Palm height not less than 5 feet,
13" x 13" of plant (Hedges & Shrub) height not less than 2 feet,
15" x 16" of plant (Tree/Palm/Topiary) height not less than 5 feet, 18" x 18" plant (Tree/Palm/Topiary) height not less than 6 feet, bottom dia of the stem is 0.75'' and above, 21" x 21" and above plant (Tree/Palm/Topiary) height not less than 7 feet, bottom dia of the stem is 1'' and above.
Heights mentioned above are excluding bag height.
All the plants supplied shall be with sturdy stem, well formed crown, vigorously growing tip, healthy foliage without any infestation and the plants shall be supplied after proper hardening off. the rates inclusive of cost of plants complete for finished item of work, as required and as directed by Engineer-in-charge, complete.
-
-
-
... More
Hyophorbe lagenicaulis(21"x21")
19
683
12977
... More
Ficus benjamina(21"x21")
90
500
45000
... More
Alocasia(21"x21")
6
600
3600
... More
Roystenia regia(21"x21")
7
683
4781
... More
Cycas revoluta(21"x21")
5
683
3415
... More
Terminalia mentallis(21"x21")
28
500
14000
... More
Cassia fistula(21"x21")
14
500
7000
... More
Lagerstroemia speciosa(21"x21")
14
350
4900
... More
Polyalthia longifolia(21"x21")
29
630
18270
... More
Bougainvillea(21"x21")
76
500
38000
... More
Ficus auriculata(21"x21")
4
3600
14400
... More
Terminalia cattappa(21"x21")
52
630
32760
... More
Milingtonia hortensis(21"x21")
14
450
6300
... More
Delonix regia(21"x21")
14
630
8820
... More
Spathodea campanulata(21"x21")
11
630
6930
... More
Mimusops elengi(21"x21")
12
450
5400
... More
Red Duranta(7"x8")
170
32
5440
... More
Rhoeo spathecea(7"x8")
835
32
26720
... More
Vinca rosea(7"x8")
85
35
2975
... More
Bougainvillea(13"x13")
1460
100
146000
... More
Ixora(13"x13")
50
65
3250
... More
Clerodendrum inerme(13"x13")
230
95
21850
... More
Pandanus gold(13"x13")
370
60
22200
... More
Nerium dwarf(13"x13")
185
65
12025
... More
Allamanda cathartica(13"x13")
1730
60
103800
... More
Codium variegatum(13"x13")
40
120
4800
... More
Pisonia alba(13"x13")
160
70
11200
... More
Golden duranta(13"x13")
1820
75
136500
... More
Korean grass
1785
192
342720
... More
Supply of fertilizers/pesticides at the site of work as required and as directed by the horticulture officer/ Engineer-in-charge, complete. including cost of all materials and labour charges
-
-
-
... More
Urea
1241.99
225
6222
... More
Potash
219.84
720
6334
... More
Chlorpyrifos spray
211.78
355
75377
... More
Loading and unloading of plants bag size (21"X21") at site of work and stacking for lead less upto 50 m and including labour charges, T&P etc., as required and as directed by Engineer-in-charge, complete for finished term of work. (excluding cost of plant bag)
395
3821
15094
... More
Loading and unloading of plants bag size (13"X13") at site of work and stacking for lead less upto 50 m and including labour charges, T&P etc., as required and as directed by Engineer-in-charge, complete for finished term of work. (excluding cost of plant bag)
6045
368
22287
... More
Loading and unloading of plants bag size (7"X8") at site of work and stacking for lead less upto 50 m and including labour charges, T&P etc., as required and as directed by Engineer-in-charge, complete for finished term of work. (excluding cost of plant bag)
2875
65
1891
... More
Transportation of bag plants form Kadiyam to Cruise terminal in VPA ( Actual payment will paid for the actual work done subjected to approval of the weight by the competent authority )as required and as directed by Engineer-in-charge, complete.
130005
1000
130005
... More
Supply and fixing of tensile fabric, type-I, having 900 GSM, 3500N/mm² of tensile strength, sioen/mehler make, having size of 36mx14m and height to suit at site requirement, using painting with Polyvinylidene Fluoride (PVDF) coating on both sides over the existing fabric including proper design and build pattern using suitable materials like Circular/ Rectangular/ Square Hallow section pipes of GI/MS, shall be painted with base and finishing coats. The cost inclusive of loading, unloading, making, installation, transportation of materials and handling, all labour, materials & lift charges etc., complete.
591
5164
3052397
... More
Supply of 1" venturi assembly complete make as approved by the Engineer-In-Charge including cost of all materials to site etc., as required and as directed by the EIC, complete for finished item of work.
2
1550
3101
... More
Supply of Sand filter 3", Throatal valve 3", NRV, Pressure Gauge, Venturi, Air Release Valve, etc.. make as per approved standards, including cost of Fittings & Accessories to site etc., as required and as directed by the EIC, complete for finished item of work. 25 cum capacity
2
26000
52000
... More
Supply and Delivery of MPR-35 Rotor, perfectly balanced coverage, MPR nozzles simplify both the design process, make as per approved standards, including cost of all materials to site and complete for finished item of work.
5
5500
27500
... More
Supply and Delivery of RAINBIRD Unispray 18 VAN Pop-Up Sprinkler, spray Head Sprinkler UNI-Spray with 18ft VAN series variable Arc Nozzle-4inch with Product Breadth of 4cm, make as per approved standards, including cost of all materials to site and complete for finished item of work.
20
1080
21600
... More
Supply and Delivery of RAINBIRD Swing Joint Assembly for Rotor & Rotary Nozzles Swing Joint 3/4th * 1" with threaded nipple, make as per approved standards, including cost of all materials to site, complete for finished item of work.
5
300
1500
... More
Supply and Delivery of RAIN BIRD 15-VAN Nozzle, Radius 15ft, Adjustable Arc 0-360degrees Sprinkler, make as per approved standards, including cost of all materials to site complete for finished item of work.
5
1080
5400
... More
Supply and Delivery of RAINBIRD Swing Joint Assembly for Unispray Pop-UP Swing Joint 1/2inch with threaded nipple, make as per approved standards, including cost of all materials to site, complete for finished item of work.
25
370
9250
... More
Supply (FINOLEX/equalent make ) of PVCs 63 mm Dia 4 Kgs/cm2, Pipes for potable water supplies conforming with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) including cost of Fittings & Accessories, installation and complete for finished item of work.
1500
77
115680
... More
Supply (FINOLEX /equalent make ) of PVCs 40 mm Dia 6 Kgs/cm2, Pipes for potable water supplies conforming with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) including cost of Fittings & Accessories, installation and complete for finished item of work.
500
36
18050
... More
Supply (FINOLEX /equalent make ) of PVCs 32 mm Dia 10 Kgs/cm2, Pipes for potable water supplies conforming with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) including cost of Fittings & Accessories, installation and complete for finished item of work.
25
30
765
... More
Supply of Plain Lateral 16mm (FPIL) Plain Laterals make as per approved standards, including cost and conveyance of all materials, cost to site including installation Charges and complete for finished item of work. (online lateral)
3000
8
25290
... More
Supply of Emitting pipe (lntegral drip lateral) Class II(Rs./m) 16mm-2/3/4lph - 40cm Inline Lateral make as per approved standards, including cost and conveyance of all materials cost to site including installation Charges and complete for finished item of work. (inline lateral)
2200
11
24992
... More
Supply and transportation of Control Valve 63mm (FPIL) finolex plasson make and one side threaded with ball valve and on and off handle make as per approved standards, including cost and conveyance of all materials cost to site including installation Charges and complete for finished item of work.
28
550
15400
... More
Supply and transportation of Flush Valve 63mm FINOLEX PLASSON make and threaded cap/cover with ball valve and on and off handle make as per approved standards, including cost and conveyance of all materials cost to site including installation Charges and complete for finished item of work.
28
70
1960
... More
Cutting open C.C. road surface with concrete saw cutter and removal with Breakerstacking including stacking of excavated materials for pipe line trench work as direction of Officer-in-charge. and including labour charges, T&P etc.,,as required and as directed by the EIC, complete for finished item of work. All labour and materials.
10
3291
32910
... More
Supply and fixing of all the other supporting fixtures i.e., grommet, start connector, nipples, output locks, saddles, MTA, FTA, shalaki, teflon tapes, solvent and other accessories etc., as per the requirement of drip irrigation system. All labour and materials for finished item of work.
-
-
-
... More
Grommet (16mm)
300
1
552
... More
Start connector (16mm)
300
1
516
... More
Nipples - 16mm
300
1
534
... More
End caps - 16mm
300
1
477
... More
output locks - 32mm
30
300
9000
... More
Saddles - 63x32
25
180
4500
... More
MTA - 32
20
20
400
... More
FTA-32
20
20
400
... More
Shalaki
5
15
75
... More
Teflon tapes
20
10
200
... More
solvent
5
600
3000
... More
flange set - 63mm
2
450
900
... More
PVC elbow-63mm
100
60
6000
... More
Tee-63mm
50
70
3500
... More
Reducer - 63*40
30
50
1500
... More
PVC elbow-40mm
60
40
2400
... More
Tee-40mm
25
50
1250
... More
Tee-16mm
200
6
1200
... More
PVC elbow-16mm
200
5
1000
... More
ball valve-40mm
10
335
3350
... More
MTA - 63
4
60
240
... More
FTA-63
4
60
240
... More
Transportation of all the materials
1
16262
16262
... More
Installation
1
30000
30000
... More
Supply, Installation and commissioning approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approvedmake with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects:White Colour. All labour and materials.
15
9158
137370
... More
Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 660 x 460 mm - Single C.P. Pillar cock. All labour and materials.
15
2611
39165
... More
Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 590 x 375 x 390 mm of Ist quality including cost and conveyance of all materials, overheads and contractor's profit etc. complete for finished item of work in all respects. All labour and materials.
6
2935
17610
... More
Supplying and fixing of SWR PVC pipes of 4 Kg/Sq.cm & 6 kg/sq.cm and fixing all specials such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps with required number of Bombay nails etc with solvent jointing as per standard practice including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. All labour and materials
-
-
-
... More
75 mm dia 3 M Double Socket PVC/SWR pipe - 4 Kg/sq.cm
30
89
2670
... More
75mm clamps
10
25
250
... More
75 mm dia - Door Bend 87.5 Degree - UPVC/SWR Pipe
fittings
10
62
620
... More
75 mm dia - Single Tee with Door - UPVC/SWR Pipe fittings
10
55
550
... More
75 mm dia - Vent Cowl - UPVC/SWR Pipe fittings
10
13
130
... More
Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice.
66
110
7300
... More
110 mm dia 3 M Double Socket PVC/SWR pipe - 6 Kg/sq.cm
36
281
10140
... More
110mm clamps
12
25
300
... More
110 mm dia - Door Bend 87.5 Degree - UPVC/SWR Pipe
fittings
12
100
1200
... More
110 mm dia - Single Tee with Door - UPVC/SWR Pipe fittings
12
100
1200
... More
110 mm dia - Vent Cowl - UPVC/SWR Pipe fittings
12
18
216
... More
Supplying & fixing of 4" (101.6 mm ) multi floor trap with Jali- UPVC/SWR Pipe fittings including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work. All labour and materials.
40
133
5320
... More
S&F premium make CPVC Pipes including the cost of pipe & its fittings & labour charges complete including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work as directed by Engineer-in-charge.
-
-
-
... More
28.60mm OD Pipe - SDR 13.5
150
136
20400
... More
34.90mm OD Pipe - SDR 13.5
110
214
23540
... More
S&F of Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with 1m long tube and wall hook with 7 years warranty including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work. All labour and materials.
15
3070
46050
... More
Supply & fixing towel rod (CP) of 24" long and 3/4 " dia including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work. All labour and materials.
15
378
5670
... More
Supplying and fixing of 16mm to 20 mm thick polished marble slab partitioins of size 3' 0" x 2' 0" for urinals including full rounding the edges , fixing in position, polishing, including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work for all floors excluding cost of seigniorage charges on marble. All labour and materials.
-
-
-
... More
Polished Marble slabs of any variety and gang saw cut
2.7
780
2106
... More
Chiselling the brick masonry wall and repairs
4.5
34
153
... More
Full Rounding the edges of Marble/ Granite
10.5
499
5240
... More
Providing and fixing wall dado with epoxy emulsion grout/ synthetic/ resin based adhesive in specified thick and pointing with specified colour epoxy grout excluding cost of tiles
2.7
328
886
... More
Supplying & fixing 150 mm x 100 mm SWG gully traps conforming to ISI 651 & 4127 with C.I Grating & constructing Brick masonry in CM 1:6 prop. over a C.C. (1:5:10) prop. Bed 100mm thick and plastering 12mm thick in CM (1:4) prop. both inside and outside surfaces and fitted with 304.8 mm x 288.6mm (12" x 9") C.I. frame and hinged cover of standard make as directed by the Engineer-in-charge including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete as per standard practice for finished item of work. All labour and materials.
15
533
7995
... More
Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg. including cost and conveyance of all materials and labour charges etc., as required and as directed by the EIC, complete for finished item of work. All labour and materials.
7
3590
25130
... More
Supply and fixing NP soap dish heavy type with NP screws etc., complete for finished item of work in all floors, including cost & conveyance of all materials, labour charges, etc. and overhead & contractor's profit complete for finished item of work as directed by Engineer-in-charge. All labour and materials.
15
236
3549
... More
Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x 457 .2 mm best quality glass mirror with approved make 1st quality including cost & conveyance of all materials, labour charges, etc. overhead & contractor's profit complete for finished item of work in all floors as directed by Engineer-in-charge. All labour and materials.
15
554
8322
... More
Supplying & Fixing Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 32 mm NB Size including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work. All labour and materials.
15
1785
26778
... More
Supplying & Fixing 31.75 mm C.P bottle trap (Heavy type) Parryware or equivalent including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work.
15
453
6801
... More
Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks including cost and conveyance of all materials and labour charges etc., complete for finished item of work. All labour and materials.
4000
8
35600
... More
S & F 65 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 with GI fittings such as elbows tees couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for GI bends union and GI connectors with checkout and socket Tata or Zenith make or equivalent. All labour and materials.
200
514
102880
... More
SCHEDULE - B (Part - B) Supply of 3 ½ core 70 Sq.mm XLPE insulated, 1100V grade armoured alluminium cable as per pecification confirming to IS:7098 (Part - I)./1554-I.
Makes : Torent / Havells / KEI /Gloster/Finecab / Polycab /RR Kabel/GEMSCAB
1500
545
817500
... More
Laying of 3½ core x 70 Sq.mm aroured aluminuim conductor cable in the trench including excavation with Sand Cushioning and protective covering on either side and top of the as directed by Engr. I/c complete with all materials
Note: Cable shall be supplied by VPT at free of cost
1600
268
429168
... More
Supply of 3 core 2.5 Sq.mm XLPE insulated, 1100V unarmoured muilt strand copper cable as per IS specification confirming to IS:7098 (Part - I)./ 1988.
Makes : Torent / Havells / KEI /Gloster/Finecab / Polycab /RR Kabel/GEMSCAB
2500
118
295000
... More
Supply of 3 core 1.5 Sq.mm XLPE insulated, 1100V unarmoured muilt strand copper cable as per IS specification confirming to IS:7098 (Part - I)./ 1988.
Makes : Torent / Havells / KEI /Gloster/Finecab / Polycab /RR Kabel/GEMSCAB
2500
71
177500
... More
Laying and clamping of 1.5sq mm/2.5 sqmm U.G cable/ on wall / existing pipe with necessary fixing arrangments such as saddles, clamps,wooden separators etc., as required and as directed by the Engineer-in-charge, complete. Note: Cable shall be supplied by VPT at free of cost.
5000
57
288950
... More
Supply and making end termination with suitable Alluminium lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc of following size of 50 sqmm Makes :Dowels /Jainson/Comet inlcuding cost of material and conveyance to work spot etc completeas required and as directed by the Engineer-in-charge. ELEC-4.1.13-a f SSR 2023- 24
1000
36
36000
... More
Supply, fixing connecting and commissioning of LT 3 phase and neutral, floor mounted, outdoor type Double door feeder pillar panel made up of 14 SWG sheet steel, with dust and verming proof IP 55 protection with 2 coats of approved shade of enamel paint over one coat of red-oxide, comprising following switch gear and metering devices of approved brands with suitable bus bar arrangement for 3 phase and neutral (200A rating for each phase and 100A for neutral) including earth point complete as directed by Engineer in charge including all labour tools and material.
1) Incomer : 4 pole 415 V, 35/36 KA, 250A, MCCB - 1 No
2) Out goings: 3 pole, 415V, 16 KA 63A, MCCB- 12Nos 3a) Panel mounted Digital Voltmeter, Ammeter
3b) LED pilot lamps 230V, 5 Nos
SWITCH GEAR BRANDS : ABB/SIEMENS/ HAVELLS/ L&T / C&S/ GE
3
140390
421170
... More
Supply and fixing of Automatic Street Light Control System with Optical Micro Sensor, Low voltage / High voltage trip and reset, operating voltage 150 -280V AC per Phase, 50 HZ with suitable SMC enclosure of IP 54 protection, MCBs and contactor suitable to control the load of 8KW of Three phase load with necessary clamping arrangements.
Makes: Any reputed brand.
3
16830
50490
... More
Providing, earth Pit using 3.0 meters long, 40 mm dia perforated G.I. pipe in a masonry enclosure duly filling with alternate of salt and charcoal complete with GI funnel and covering with RCC cover conforming to IS as directed by Engineer in charge including all labour and material.
6
4497
26986
... More
Supply and laying 25 mm X 6 mm G.I strip as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) as directed by engineer in charge
60
110
6613
... More
Supply of 25 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I). Makes : Polycab / KEI / RPG / Finolex / Orbit / Havells / Paragon / V-Guard / Fortune Art
/ Gloster/ Suncab / Finecab
900
247
222300
... More
Supply of 50 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I). Makes : Polycab / KEI / RPG / Finolex / Orbit / Havells / Paragon / V-Guard / Fortune Art
/ Gloster/ Suncab / Finecab
500
405
202500
... More
Excavation of Trenches of required width for laying of GI pipes, cables etc., including dressing of sides, ramming of bottoms, suitable depth including backfilling of the soil, consolidating depositing layer as directed by Engineer in charge with all labour tools and tackles Hard / Dense soil etc., complete.
80
324
25938
... More
Supply of XLPE insulated IS:7098/II/85 3C X 185 Sq mm H.T. cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete.
Makes : Torent / Havells / KEI /Gloster/Finecab / Polycab /RR Kabel/GEMSCAB
700
1691
1183700
... More
Laying of 3C / 3½ core x 185/70/50/25 Sq.mm aroured aluminuim conductor cable in the trench /pipe including excavation as directed by Engr. I/c complete with all materials
Note: Cable shall be supplied by VPT at free of cost
2000
187
374000
... More
Supply and Laying / clamping of 50 mm dia (outer) HDPE pipe of PE 100 Grade confirming to ISI in the existing trench complete as directed by Engineer in charge including all labour and material.
Make: Tulasi / Sudhakar / Nandi/KSP
2500
109
272500
... More
Supply and Laying / clamping of 90 mm dia (outer) HDPE pipe of PE 100 Grade confirming to ISI in the trench complete as directed by Engineer in charge including all labour and material.
Make: Tulasi / Sudhakar / Nandi/KSP
1800
182
327600
... More
Supply of (300mm) Light duty exhaust fan with metalic blades and wire guard etc complete.
Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DB / Orient hill air/Halonix/Polycab/ G.M. (Xenix)
6
1744
10464
... More
Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete
6
807
4848
... More
Supply and transportation of 3 Watt LED Nebula -Spike O/D type Die cast alluminium Housing along with inbuilt driver and connector to work with suitable Dimension, Temp: 2700K - 3000K as directed by Engr. I/c complete with all material, labour tool and tackles. Make:K-Lite/Wipro/Osram/Phillips/Jaquar/equivalent with NABL CERTIFIED LAB REPORT MAKES ONLY
6
450
2700
... More
Supply and transportation of 6 Watt LED wall trio model near by O/D type Die cast alluminium Housing along with driver and connector to work with suitable Dimension, Temp: 2700K - 3000K as directed by Engr. I/c complete with all material, labour tool and tackles. Make:K-Lite/Wipro/Osram/Phillips/Jaquar/ equivalent with NABL CERTIFIED LAB REPORT MAKES ONLY
20
1596
31920
... More
Supply, fixing, testing and commissioning of 20 watt neon flex strip lighting belt/piping type including suitable driver units, clamps, Power Cord Set Suitable for with end caps as required and as directed by the engineer-in-charge complete with all material, labour tool and tackles. Make:K-lite/ Phillips/Jaquar/Crompton/B-lite/Halonix/AKARUI/any equlent
74
1500
111000
... More
Supply, Installation, Testing and Commissioning of wall jado wood bronge light, O/D type Die cast Alluminium Housing, 12W LED 2700K - 5700K with suitable Dimensions, Mounting: W18, PF: Cream IP: 65 Warranty: 3 Years. Make: Phillips/Jaquar/Crompton/Helonix/AKARUI/any other equalent
28
8148
228144
... More
supply and transportation of In-Ground Luminaire - Four Way, 5-9W LED Die cast Alluminium Housing, 2700K - 5700K, Including Connector, with suitable Dimensions, Mounting: Recess PF: SS IP: 67 IK: 09 Warranty: 3 Years. Make: Phillips/Jaquar/Crompton/K-lite/Keslac/equivalent
90
4116
370440
... More
Supply of 30-40W LED deco column light pole TRI or Mono COLOR 3000K - 5700K Symmetrical, Die Cast Alluminium Housing,with suitable Dimensions and 2500-3000mm heigth, Operatable 130V-270V operating range of voltage and withstanding 400Volts for 8 hours, Low and high voltage protection, short circuit protection, PF: 0.95, LM80 compliance Reports LEDs mounted on MCPCB, Graphite Grey,Anthracite Grey,Jet Black IP: 65 Warranty: 3 Years bolts. Make: Phillips/Jaquar/Crompton/K-lite/KESLACE/equivalents only
170
19800
3366000
... More
Supply of Stone Bollard Light 10W- WW - IP65 Dia 100mm and length 900mm with all the necessary accessories. Make: Phillips/Jaquar/Crompton/Helonix/AKARUI/Bee-lite/any equalent
102
32400
3304800
... More
Supply and Transporation of Spot light, 2 x 12W LED WW: 2700K - 3000K with suitable Dimensions and necessary accessories, Mounting: W32, PF: Graphite Grey,Anthracite grey,Jet Black Optics: 15°- 40°, BA: 80-120°, IP: 65, Warranty: 3 Years. Make: K- Lite/Phillips/Jaquar/Crompton/Halonix/B-lite/AKARUI/any equalent
25
9360
234000
... More
Supply and transportation of Wall light LED 6-7W IP66, 400-500 lm,Die cast Alluminium Housing along with driver and connector to work with suitable dimensions, Temp: 2700K-4000K as directed by Engr. I/c complete with all material, labour tool and tackles. Make:K-Lite/Wipro/Osram/Phillips/Jaquar/any equalent makes only
6
1092
6552
... More
Supply and Transporation of LED solar landscape light 7W IP66 along with driver and connector to work with suitable dimensions, WW: 2700K-3000K as directed by Engr. I/c complete with all material, labour tool and tackles. Make:K-Lite/Wipro/Osram/Phillips/AEC/Heper/Jaquar/B-lite/Akarui/any equalent
75
1358
101867
... More
Supplying of Ritu Bollard 9W LED, WW: 2700K - 3000K Symmetrical with suitable Dimensions, Mounting: M5 PF: Graphite Grey,Anthracite grey,Jet Black IP: 65 IK: 08 Warranty: 3 Years. Make:K-Lite/Wipro/Osram/Phillips/AEC/Heper/Jaquar/B-lite/Akarui/any equalent
119
3120
371280
... More
Supply of Verbena Polar, 2 x (30-50)W LED 2700K - 5700K with suitable Dimensions and 4000mm height, Mounting: M46, PF: Graphite Grey,Anthracite grey,Jet Black IP: 65 Warranty: 3 Years. Make:K-Lite/Wipro/Osram/Phillips/Jaquar/any equalent
56
18200
1019200
... More
Supply and transportation of LED solar spike light 7W/9W IP66 along with driver and connector to work with suitable dimensions, WW: 2700K-3000K as directed by Engr. I/c complete with all material, labour tool and tackles. Make:K-Lite/Wipro/B-lite/Osram/Phillips/AEC/Heper/Jaquar/Akarui/any equalent
35
5640
197400
... More
Supply and fixing of 60W LED decorative post top lantern power light, operating voltage 120V-280V etc., as required and as directed by the engg. i/c with all labour and materials. Make: K-Lite/Phillips/Jaquar/Crompton/Halonix/B-lite/AKARUI/any equlent
8
3540
28320
... More
Supply and fixing of 20W, LED retrofit tube light with aluminium anodised body, input voltage AC 220 - 260 Volts with PF0.9, Surge protection: 2KV,THD10%, with inbuilt driver and frosted cover CCT: 3000K - 3300K, minimum CRI70, .etc., complete. as per IS 10322 (Part 5/ Sec 1).2012
a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton /Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG.
5
588
2940
... More
Fixing of LED luminaire (Down lights / Mirror optic / Ornamental type fitting with all necessary accessories in false ceiling / on wall / inground including giving connections (testing and commissioning) and all labour charges etc., as required and as directed by the Engineer-in-charge.
704
208
146840
... More
Supply and fabrication of steel by using suitable flats, angles, heavy ,sheets, channels of required sizes to provide suitable enclosure box with stand to safe guard flood light fitting, back clamps, including cutting, bolting, riveting, drilling, welding etc. including providing one coat of zinc rich epoxy paint primer and high quality enamel paint finish coat complete as directed by Engineer in charge.
500
75
37500
... More
Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade, FRLS with IS:9537 part 3 PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. Makes : Sudhakar / Modi ( ISI mark).
200
105
21060
... More
Supply and Fixing of 25mm dia heavy (2.20mm thickness) grade, FRLS with IS:9537 part 3 regid PVC pipe (ISI mark) concealed in wall with all required accessories including masonary work for light, fan , common and separate plug point including all labour charges etc., complete. Makes : Sudhakar / Modi ( ISI mark).
150
126
19034
... More
Supply and Laying of P.V.C casing and caping (ISI MARK) with double locking arrangments with groover trunking of size not below 12.5mm height 25mm width with all accessories, duly sealed at points and erected on Wall / Ceiling including cost of all materials and labour charges complete. make: Modi with ISI
60
77
4657
... More
Supply and fixing of 16" (400mm) Wall mounted Fan. Makes: any reputed brand.
2
2766
5532
... More
Supply and fixing of 48" (1200mm) Sweep Ceiling Fan, with double ball bearings, air delivery more than 200 cubic meter/min, but without Regulator. Makes: any
reputed brand.
3
2405
7215
... More
Supply, fixing and commissioning of surface/concealed type point wiring for light point/fan point/exhaust fan point/ call bell point with 2 runs 1.5sqmm FRLS PVC insulated copper conductor single core multi strand cable to be used in surface/recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5sq mm. FRLS PVC insulated copper conductor single core cable etc., as directed by Engg. i/c complete with all materials labour tools and tackles. Cable brands: Radiant/polycab/plaza/nicco/finolex/havells/KEI/any equalent.
20
694
13880
... More
Supply and fixing of 15/16 amps piano type switch on the existing switch box/cover with all labour, tools & tackles as directed by engg. i/c. Brands: anchor/cona/mk/pointer/gold medal olive/millon zoom.
80
110
8800
... More
Supply and fixing of 15/16 amps piano type socket on the existing switch box/cover with all labour, tools & tackles as directed by engg. i/c. Brands: anchor/cona/mk/pointer/gold medal olive/millon zoom.
25
128
3200
... More
Supply and wiring for twin control light point with 1.5sqmm FRLS PVC insulated copper conductor single core multi strand cable in surface/recessed medium class PVC conduit, 2 way piano type switch, modular plate, suitable size PVC box and earthing the point with
1.5sq mm. FRLS PVC insulated copper conductor single core cable etc., as directed by Engg. i/c complete with all materials labour tools and tackles. 1) Cable brands: Radiant/polycab/plaza/nicco/finolex/havells/KEI/any equalent.
20
975
19500
... More
Supply and fixing of 100mm x 100mm x 60mm GI box on surface or in recess with suitable size of phenolic laminated sheet cover in front complete with all labour, tools & tackles as directed by engg. i/c.
20
160
3200
... More
Supply and fixing suitable size GI box with modular plate and cover on surface or in recess, including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch, connections etc., as required and as directed by the engg. i/c with all labour and materials. Make: Anchor/cona/havells/mk
20
495
9900
... More
Supply and fixing of 4 module premium quality modular covering plates for fixing of switches/sockets/regulatorsetc., as required and as directed by the engg. i/c with all labour and materials. Make: Anchor/cona/havells/mk
50
77
3850
... More
Supply and fixing of 6 module premium quality modular covering plates for fixing of switches/sockets/regulatorsetc., as required and as directed by the engg. i/c with all labour and materials. Make: Anchor/cona/havells/mk
50
110
5500
... More
Supply, fixing and connecting of 4 module GI metal boxes for fixing modular switches etc., duly flushed in the wall conforming to IS 3854:1997 as directed by the engg. i/c including all labour, tools and tackles. Make: Anchor/cona/havells/mk/million zoom
50
105
5250
... More
Supply, fixing and connecting of 6 module GI metal boxes for fixing modular switches etc., duly flushed in the wall conforming to IS 3854:1997 as directed by the engg. i/c including all labour, tools and tackles. Make: Anchor/cona/havells/mk/million zoom
50
143
7150
... More
Supply and wiring for circuit/sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed medium class including PVC conduit as required, complete with all labour, materials, tools & tackles as directed by the engg. i/c. (1 RMT = 3 runs of 1mtr length) 2x2.5 sqmm + 1x2.5 sqmm earth wire. Brands: Finolex/finecab/havells/polycab
250
167
41750
... More
Supply and drawing of the following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit, as required, complete with all labour, materials, tools & tackles as directed by the engg. i/c. (1 RMT = 2 runs of 1mtr length) 2x1.5 sqmm. Brands: Finolex/finecab/havells/polycab
150
41
6150
... More
Supply and fixing of 4 way (4+12) double door MCB distribution board, 415 volts, on surface/recess, complete with neutral without MCB/RCCB/isolator, including Earthing complete with all labour, tools & tackles as directed by engg. i/c. Make: Any reputed make.
10
1870
18700
... More
Supply fixing and connecting of 32A 240V, 4 pole MCB's isolator complete with all labour, tools and tackles as directed by engg. i/c. Make: Any reputed make.
15
880
13200
... More
Supply, fixing, testing and commissioning of 250A 36/35KA, 415V TP MCCB in SS enclosure complete with all accessories to the existing iron frame/wall as directed by engg. i/c with labour, tools and tackles. Makes: L&T/SCHNEIDER/SIEMENS/LEGRAND
1
18755
18755
... More
Supply and fixing of step type socket size electronic fan regulators. Brands: anchor/cona/mk/pointer/gold medal olive/million zoom.
3
208
624
... More
Supply and fixing of 5 amps ceiling rose on the existing junction box/wooden block complete with all labour, tools & tackles as directed by engineer - incharge. Brands: Anchor/cona/mk/pointer/any equalent
10
22
220
... More
Supply and fixing of holder complete with all labour, tools & tackles as directed by engg. i/c. Brands: Anchor/cona/mk/pointer/any equalent
20
20
400
... More
Supply and providing of heavy duty anchor fasteners to the existing falls ceiling for fixing of tube light fitting / ceiling fans, as directed by the engg. i/c complete with all labour, tools and tackles.
10
104
1040
... More
Providing grooving to the existing floor/walls/ceiling for PVC conduit wiring complete with all accessories as directed by the engg. i/c including all labour and materials, tools and tackles.
100
148
14800
... More
Supply and laying of 6 SWG GI wire at 0.5m below ground level for conductor earth electrode, including connection/termination with GI thimble etc., including supply of materials complete with all labour, tools and tackles.
150
57
8550
... More
Removing of existing HT/LT overhead line including shifting the cable as required and as directed by the Engg-in-charge, complete. All labour and materials.
1
6940
6941
... More
Supply and Making heat shrinkable type - outdoor termination joint kit of approved make suitable for XLPE insulated 11 KV cable, with required components, preparation of cable ends, testing etc. as required of 3 Core 95/120/150/185 sq mm sizes.
Makes: 3M/Recham/Any reputed brand.
1
14611
14611
... More
Supply and Making heat shrinkable type - straight through joint kit of approved make suitable for XLPE insulated 11 KV cable, with required components, preparation of cable ends, testing etc. as required of 3 Core 95/120/150/185 sq mm sizes.
Makes: 3M/Recham/Any reputed brand.
1
23505
23505
... More
Removing of existing HT/LT pole (MS/SS/Spun) of overhead lines including loading & unloading of the pole as required and as directed by the Engg-in-charge, complete. All labour and materials.
10
1654
16543
... More
Supply and providing of 125A switch fuse unit in a sheet steel enclouser, as ditrected by the engineer
in charge, complete. All labour and materials.
1
6291
6291
... More
Breaking of PCC / removing of CC block with out any damage of existing other component etc., as directed by Engineer in charge including all labour tools and tackles.
50
351
17550
... More
Supply and providing of P.C.C. 1:3:6 with 20 mm graded granite as coarse aggregate and river sand as fine aggregate (220 Kgs of cement per M3of finished concrete) including mixing, depositing in position, tamping, finishing and curing for base/pole concreting, road
cutting etc. as directed by engineer in charge including all labour and tools.
60
5610
336643
... More
Supply, fixing, installation and commissioning of CCTV cameras and establishment of Boom security gates along with the necessary accessories as required and as directed by the engg-in-charge, complete. All labour and materials. Supply, lnstallation of Night Vision lP Network 4.0 Mp Outdoor Cameras,
Housings with allrequired accessories Make: Cp
Plus, Bosch, Axis, Pelco, Panasonic, Sony
30
9200
276000
... More
Supply and laying of Cat6 network cable with all required accessories
Make. D-Link, Digisol, CP-Plus, Polycab, TP-link , Honewell
1900
115
218500
... More
Supply & Laying at 3 Core Power Cable & all Accessories
Make: D-link, Beldon, Fine cabe, CP-Plus, Polycab, TP-link, Honeywell or Equivalent
800
118
94912
... More
Supply & Laying of Armoured 6 Core SMF Fiber Cable & All Accessones Make: Finolex, Sterefyte. Digisol or Equivalent
800
60
48000
... More
Supply, Laying of PVC/ HDPE Conduit & all required accessones Make: Sri Tulsi, Nimal, Astro, Sudhakar or Equivalent
1500
80
120750
... More
Supply, lnstallation of OFC Junction points, IC-LC patch cards .connectors with all requfreo accessories
Make: D-Link/Tp-link/DBC or Equivalent
6
6000
36000
... More
Supply, Installation, Testing, Commissioning and Maintenance of 8 Port Network Manageable POE Switch with 2 giga uplinks Ports
Make: TP-link,DIink, Digisol, Cisco. CP-Plus or Equivalent
3
14000
42000
... More
Supply, Installation of 24 Port Network Manageable POE Switch Mth 4 Giga bit SFP
Make: TP-link.DIink, Digisol. Cisco. CP-Plus or Equivalent
1
36590
36590
... More
Supply, Installation of 2KVA ONLINE UPS along with externam batteries , cables and racks for placing batteries and UPS
3
61000
183000
... More
Supply of Outdoor Enclosures 15U Network Rack as per techncial specifications at Annexure-A
Make: VoItaic. Bestnet. CP Plus
1
15000
15000
... More
Supply of Ouidoor Enclosuæs B+g as per as per technical sqecifications at Annexure-A
3
24500
73500
... More
Supply of Video Surveillanœ Recorder( 64Channel NVR) with 30days storage & all required accessories as per technical specifiœtions at Annexure-A
Make: Axis, Bosch, CP plus, Panasonic, Pelco, Sony
1
190000
190000
... More
Supply & Erection of customized CCTV Poles of 20 ft with required fabrications,mount stands Earth pits as per the standards IS-3043
12
15254
183048
... More
Supply, Installation, Testing. Commissioning and Maintenanœ of 55inches Full HD resolution LFD Monitor ,HDMI Cables, Mounting stand,
1
94000
94000
... More
Supply and Installation of Barcode readers along with all required accessories
1
1989
1989
... More
Supply and Installation of Barcode printers,label stickers along with all required accessories
1
4750
4750
... More
Supply and Installation of Boom barrier, loop detetors. photo sensor cells and other all required accessories for automatic gate access control system
2
63589
127178
... More
Supply and Installation of Night vision IP network 2MP outdoor cameras along with requrued accessories
6
9200
55200
... More
Supply and installtion of ANPR Cameras along with required accessories
4
76000
304000
... More
Supply and Installtion of desktop computer with all required accessories
Mouse, keyboard etc). parking applciation software
1
134191
134191
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements