Visakhapatnam Port Trust Tender

SITC of 5.0 KVA Stabilizers to work on 170-240VAC with time delay relay and over load protection as directed by Engr.I/c Make: Unistab /V-guard/Real guard/ITL

Supply and running of 2 runs of copper tube of size 5/8” x 1/4”for section and liquid line between Indoor & Outdoor unit of Split AC unit with foam as directed by Engr.I/c Copper: Totaline / Nippon /Mandev Nitrile Insulation: Kflex/ Totaline /Armaflex

Supply and Clamping of 50 mm dia PVC pipe for passage of AC unit drain water including all required L-bows, T-bends as directed by Engr.I/c

Supply Erection ,Testing & Commissioning of 630KVA 11/.433 KV 3 Phase 50Hz DYN 11 ONAN type ISI marked copper wound Transformer, with standard accessories, winding temp. rise 45°C/40°C first oil fil, having permissible total loss values not exceeding to 75% of the maximum total loss values for 11 KV as per Energy Efficiency Level-2 at basic insulation level confirming to IS 2026 (Part-I to Part-II)with larest Amdt. And IS 1180 Part-I : 2014 with cable box. Off load Tap changer (OLTC) +10% to -10%, etc., complete and as per the following continuous rating Make:Schneider/Kirloskar/Voltamp/ Esennar/ Toshiba/ KPEL/ Powertech

Supply, fixing connecting and commissioning of LT 3 phase and neutral, floor mounted, outdoor type feeder pillar panel of size 1.0mtr. x 1.5 mtr x 0.6 mtr.(approx), made of 14 SWG sheet steel, with dust and various proof IP 55 protection with 2 coats of approved shade of enamel paint over one coat of red-oxide, thickness of 14 SWG comprising of following switch gear and metering devices of approved brands with suitable bus bar arrangement for 3 phase and neutral (400A rating for each phase and 200A for neutral) complete as directed by Engineer in charge including all labour tools and material. 1) Incomer: 4 pole 415 V, 50 KA, 630 A, MCCB with Thermostatic setting, - 1 no. 2) Out goings: a) 4 pole, 415 V, 35 KA 125 A,MCCB-6 Nos. b) 4 pole, 415 V, 63 A MCBs – 3Nos 3a) Panel mounted Digital Voltmeter, Ammeter 3b) LED pilot lamps 230V, 5 Nos SWITCH GEAR BRANDS : ABB/SIEMENS/ HAVELLS/ L&T / C&S/ GE/

Supply and fixing of 11KV, 200Amps, ( Tilting type)Triple pole gang operated vertical mounting type AB switch with porcelin insulators of approved brand with 40/38mm dia medium grade down take GI pipe and locking arrangement in ‘ON’ and ‘OFF’ positions complete as directed by Engr.i/c

Supply and fixing of 3 phase 11 KV H G Fuse set of approved brand as directed by Engr. I/c.

Supply and fixing of 11KV, Pin insulators complete with hard ware on the existing structure as directed by Engr.I/c complete with all labour tools and tackles.

Supply and fixing of 11KV, Disc insulators complete with 33 KV Grippers and hard ware on the existing structure as directed by Engr.I/c complete with all labour tools and tackles.

Providing, earth station by using 1.8 mtr (approx.) long, 80 mm dia perforated C.I. pipe In a masonry enclosure of duly filling with alternate layers of salt and charcoal complete with GI funnel and covering with PCC cover and conforming to IS 3043 as directed by engineer in charge including all labour and material

Supply, fixing, connecting and commissioning of 6 SWG GI earth wire in recess/surface/clamped to wall/through PCC etc., from earth to switch gear/equipment including connecting the same at both ends as directed by engineer in charge including all labour and material.

Supplying, fixing, connecting and commissioning of 50 X 6 MM GI earth strip in recess/surface/clamped to wall/through PCC etc., from earth to switch gear/equipment including connecting the same at both ends as directed by Engineer in charge including all labour and material.

Supply and laying/ Drawing of 3 ½ C X 185 Sq. mm LT 1100Volts grade XLPE insulated & PVC sheathed, armored, PVC overall sheathed multi stranded aluminum conductor Cable of conforming to IS 7098 /Part-I approved brand in the existing trench with sand cushioning and protective covering on either side and top including excavation / through the pipe /to the wall as directed by Engg. I/c with all materials labour tools and tackles. Brands: Universal / Gloster / RPG / Nicco / Havell’s / Polycab / Laser cable

Supply and laying/ Drawing of 3 ½ C X 120 Sq. mm LT 1100Volts grade XLPE insulated & PVC sheathed, armored, PVC overall sheathed multi stranded aluminum conductor Cable of conforming to IS 7098 /Part-I approved brand in the existing trench with sand cushioning and protective covering on either side and top including excavation / through the pipe /to the wall as directed by Engg. I/c with all materials labour tools and tackles. Brands: Universal / Gloster / RPG / Nicco / Havell’s / Polycab / Laser cable

Supply & Providing of Brass Gland terminations with heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc suitable for 3 ½ core 185 sq.mm armoured Alu. Cable as directed by Engr.I/c complete with all materials labour tools and tackles.

Supply & Providing of Brass Gland terminations with heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etcsuitable for 3 ½ core 120 sq.mm armoured Alu. Cable as directed by Engr.I/c complete with all materials labour tools and tackles.

Supply, Fixing, Testing and commissioning of 3 Phase 415V, 4 way double door type VTPN MCB DB on the existing angular frame duly grouted to the wall including connecting the incoming and outgoing connections as directed by Engineer in charge. With all labour material tools and tackles with following. Incomer : 3 Phase 4 Pole 400/440V, 100A Isolator 1 No. Out going ; Single pole 32 A MCBs-12 Nos. Brands: Siemens/Legrand/Havells

Supply, fixing, testing and commissioning of MCB distribution board on angular frame duly grouted to the wall or concealed type, including connecting the incoming supply and outgoing load connections duly providing Single pole 6 to 32A MCBs – 12 Nos as directed by Engineer- in- charge including all labour material tools and tackles. MAKE: ANCHOR / BCH / HAVELLS / SCHNIDER / LEGRAND / C&S

Supply and laying/ Drawing / Clamping of 4 core x 25Sq.mm XLPE insulated & PVC sheathed armoured 1.1 KV grade copper conductor cable as per IS 7098 Part-I -1988 etc complete.. through the pipe / to the wall / on the cable tray as directed by Engg. I/c with all materials labour tools and tackles. Brands: Universal / Gloster / RPG / Nicco / Havell’s / Polycab / Laser cable

Supply and laying/ Drawing / Clamping of 3 core x 6 Sq.mm PVC insulated & PVC sheathed of 1.1 KV grade copper conductor cable as per IS 1554 Part-I -1988 etc complete.. through the pipe / to the wall / on the cable tray as directed by Engg. I/c with all materials labour tools and tackles. Brands: Universal / Gloster / RPG / Nicco / Havell’s / Polycab / Laser cable

Supply and Fixing of 25 mm medium class PVC conduit along with accessories on surfacecomplete with all labour tools & tackles as directed by engineer in charge. PVC PIPE BRANDS: SUDHAKAR / PLAZA / MERCURY / RADIANT / AVON PLAST/ MODI

Supply and providing of Cable glands with heavy duty copper lugs crimped with crimping tool PVC taping etc. suitable for 4 core x 25Sq.mm cable XLPE insulated & PVC sheathed armoured

Supply & Erection of 150 x 50 size 1.6 mm thickness of Hot Dipped Galvanized Iron perforated cable trays without cover, including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling/Wall withsuspenders etc., complete as directed by Engr. I/c

Supply & Erection of 300 x 50 size 1.6 mm thickness of Hot Dipped Galvanized Iron perforated cable trays without cover, including horizontal and vertical bends, reducers tees, cross members and other accessories as required and duly suspended from the ceiling/Wall with suspenders etc., complete as directed by Engr. I/c

Supply and fabrication of steel by using suitable flats, angles, channels of required sizes to provide required cross arms, back clamps, support clamps, frames for clamping of cable to existing wall cutting, bolting, riveting, drilling, welding etc. including providing one coat of zinc rich epoxy paint primer complete as directed by Engineer in charge.

I T C of 1.5 Ton Window AC unit duly providing necessary Altrations to the existing Wooden / Alluminium / UPVC / Iron framed window for fixing the Window AC unit with all men and materials as direcxted by Engr.I/c

Providing random rubble masonry in C M 1:5 for Construction plinth and foundations including curing, for erection of a transformers/panels as directed by Engineer- in- charge with all material, tools tackles.

Plastering with CM 1:6, 12mm thick including racking out joints cleaning the surface curing etc. as directed by Engineer- in- charge with all labour and material.

Supply and providing of P.C.C. 1:3:6 with 20 mm graded granite as coarse aggregate and river sand as fine aggregate (220 Kgs of cement per M3 of finished concrete) including mixing, depositing in position, tamping, finishing and curing for base concreting etc. as directed by engineer in charge including all labour and tools.

Transportation and placement of 11 to 13 mtrs long B.G rail / Spun / PCC poles in position for poles / struts in the existing pits duly welded with existing base plate of size (300x300x8/10mm) as directed complete with all labour and material, including loading and unloading. ( Required poles will be supplied by VPT at free of cost)

Formation of 2/4 /6 structure on the existing BG rail pole with existing MS channels / angles /flats duly fixing with suitable clamps / insulators including formation of Alu.Bus as directed by Engr.I/c complete with all lobour tools and tackles. Note: Required Alu. conductor shall be supplied by VPA at free of Cost