Visakhapatnam Port Trust Tender

C.I. Check Blocks 52Kg (VPT sketch no.608A)

M.S. Bolts of Size 25x180mm (with square Head and Hex nuts 1"x7")

60Kg. 1M long Fish Plates (T-5916)

Fish Bolts (25X 140mm) with Nuts as per RDSO Drg.no. T-1899 Alt-2 of size 25mm and 140mm long conforming to IRS Specification no. T-31/92.

GFN Liners (T-3706)

Grooved Rubber Pads (T-3711)

Washers 6mm thick (25mm dia)

60/52kg Combination fish plates T-696 to T-699 (4Nos. Per each set)

PSC Sleepers (T-2496)

Transportation of rails, points and crossings and P. Way fittings of 52 kg / 90 R of varying lengths not exceeding 13 m (42'-8") up to a distance of 6km to any where in port area by lorry/ or other means including carriage and handling, loading and unloading by mechanical means (i.e. by crane) and stacking within 30m lead at nominated area as required and as directed by the Engineer-in-Charge complete including tools, plant and labour charges.

Transportation of pre-stressed concrete sleepers of B.G. track size 2750 x 154 / 270 x 235 mm up to 6 km to anywhere in port area by lorry or other means including carriage and handling, loading, unloading by mechanical means (i.e. by crane) and stacking at nominated place as directed by the Engineer-in-Charge complete including tools, plant and labour charges.

Linking of BG track with 60kg/52kg rails on new pre-stressed concrete sleepers with M+7 density with grooved rubber pads, MS liners and elastic rail clips including spreading of concrete sleepers, pairing and seating rails, bolting joints for unweldedrails and fixing with liners and elastic rail clips to the guage, slewing to the alignment, levelling, all leads and lifts, tools and plant etc.,as required and as directed by the Engineer-in-charge complete (Labour charges only)

Supply of JCB (3D) Earth mover for excavation / levelling and removing debris / earth etc., including fuel, operator charges and incidental charges etc., as required and as directed by the Engineer-in-Charge. All Labour and equipment, spares etc., complete. (Payment will be made for number of hours worked at site only)

Pulling back creep including respacing of displaced sleepers average creep 6" on both sides on ordinary track and over hauling the simple turnout of 1 in 8 1/2 points and crossing etc., as reqired and as directed by the Engineer-in-charge., complete

Supplying and stacking of machine crushed granite metal ballast of 50mm size at site of work along permanent way tracks as required and as directed by the Engineer-in-Charge, complete with all leads and lifts. All labour and materials.

Spreading ballast of granite metal along and across the P-way tracks within a lead of 50 m and lift of 2 m and as directed by the Engineer-in-Charge. Under traffic working conditions including tools etc., complete. Labour charges only.

Supply of fusion AT Welding portions and welding of rail joints for works/ Conversion of single rail panel to three rail panels on cess/insitu including finishing, testing and cost transporatation of portion and other associated equipment complete by road from firm to workshop to the site of work including insurance loading and unloading and stacking at destination of 60kg dry mould and supply of skilled/Artisan staff like welder, moulder, chipper, cutter aligner, strikes/hammer man & adequate Nos. of semi skilled and unskilled labour and supplying petrol @ 1.6 litres/ joint for facilitating welding works on track by shifting the joint sleepers up to 30cm on either side providing suitable gap of about 23mm to 25mm by pulling back of rail including removing keys,spikes, other fastenings required and refixing the same with missing fitting with new fastenings after welding, clearing the rail ends, fixing the petrol tank and preheating the rail ends by Railways approved contractors equipment and chipping the excess materials if required, bringing the shifting joint sleepers to the specific spacing and packing them to the required specification as directed including adjustment of required gaps for welding, aligning, levelling etc,. complete including contractor's own files for filling after welding on cess/on track. This item is also including hire of 10 sets of Joggled fish plates 52kg with bolts RDSO-T/5848

Dismantling existing PSC B.G. Track laid with 52 Kg / 90R rails including removing all rails, PSC sleepers, fittings, fastening etc., including stacking the released rails, sleepers and fittings etc., within a lead of 30 m at nominated place or yard, lift etc. complete as required and as directed by the Engineer-in-Charge under traffic working conditions including tools, plant and labour charges only.

Dismantling existing check railing to the rails of B.G. track (wooden / PSC sleepers) with 52 kg/90 R rails including removing all rails, check bolts and nuts, check blocks, fittings, fastenings etc., including stacking the released rails and fittings etc., within a lead of 30 m at a nominated place or yard, lift etc. complete as required and as directed by the Engineer-in-Charge under traffic working conditions including tools, plant and labour charges only.

a) For both side rails

b) For one side rails

Gas cutting rail flanges of 90 R / 52 kg at P.way yard / stack yard including supply of necessary gas, handling, cutting, tools and plant etc., as required and as directed by the Engineer-in-Charge, complete. All labour and materials.

Drilling holes upto 32 mm dia. to B.G. Rails web 90 R/52 kg of B.G. track, at P-way stores / stack yard including handling of rails in full length (upto 13 m) within a lead of 30 m and lift as required for drilling holes by means of drilling machine, stacking the drilled rails within 30 m as required complete including tools, plant etc., as required and as directed by the Engineer-in-Charge, Complete. All labour and Hire charges of Machinery.

Check railing to the rails of the B.G. Track with 90 R / 52 kg rails, wooden / PSC layout, positioning of check rails inside jointing, check bolting with check blocks, washers, spiking, cutting of rails, maintaining level, alignment etc., as required complete including drilling holes for fish joints to the rails, all leads and lifts as required and as directed by the Engineer-in-Charge under traffic working conditions including tools and plant. Labour charges only.

a) For One side check Railing

b) For Both sides check Railing

Supply of 60kg (UIC) 1 in 8.5 (1673mm fan shaped) BG turnout with using 1st quality rails as per IRS T-12 with over riding curved switches (6400mm) RDSO drawing No. T-4865, 4966,4967) and CMS crossing and as per Drawing No. RDSO/T-4967/1 in position using 1,000 mm long Fish Plates to RDSO Drg No: T-5916 including standard check rails, Lead Rails, Elastic Rail Clps, Grooved Rubber Pads, Metal Liners, Distance Blocks , Heel Blocks, M.S. Bearing Plates, Fish Bolts with nuts and washers, Stretcher Bars, Brackets etc., and all other fittings required for complete set of Turnout as mentioned in the RDSO drawing with alteration if any.

Packing B.G railway track of Pre-stressed concrete sleepers with metal ballast / gravel / crusher dust including lifting the track in stages so as to keep a ballast cushion of 25cm deep underneath the sleepers and packing the sleepers below the rail seat, slewing to the alignment 2nd packing throughout the length of the sleepers, slewing to the final alignment, to the required cant, gauge, level, picking up slacks, boxing and dressing complete as required and as directed by the Engineer-in-Charge complete. under traffic conditions including plant, tools and labour charges only

a) First Packing

b) Second Packing

c) Third Packing

"Providing Dry Lean Cement concrete 1:3:6 nominal mix (using 220 kg. of cement per M3 of finished concrete) using 20mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position and spreading in layers, compaction with power roller, finishing, curing etc., as required and as directed by the Engineer-in-charge complete. All labour and materials (W/C ratio shall be finalized by trial rolling at field, well in advance).

Plain cement concrete M-20 mix using 20mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position, vibrating or tamping, finishing, curing etc ., as required and as directed by the Engineer-in-charge complete. All labour and materials.

Removing C.C. Blocks in pavements carefully without damaging the blocks and reuse the same wherever necessary including removing the mortar joints around block and stacking them required and as directed by the Engineer-in-charge complete. All labour and materials.

Supplying, stacking and spreading 12.5mm and 6 mm granite metal in 60:40 ratio to the required lines and levels for bedding PCC blocks as required and as directed by the Engineer-in-charge. All labour and materials complete.

Paving with cement solid blocks of size 30 x 15 x 20 cm including laying the same to the required line and level on a bed of 12.5 mm graded granite metal and grouting the 10mm thick joints with clean dry screened river or gedda sand and flushing with water using jet pump etc., including rolling with power roller as required and as directed by the Engineer-in-charge complete. All labour and materials but excluding cost of 12.5 mm graded granite metal bed and cement concrete blocks.

Transportation of debris to a lead of 5Kms including stacking, loading, unloading and levelling the same to the required level etc, as required and as directed by the Engineer-in-charge complete.