Visakhapatnam Metropolitan Region Development Authority Tender

Providing 250 KVA Transformer, 160 KVA DG set and Panel boards to the Old Municipal Office (Used for;Supply Installation Testing and Commissioning of AUTO MAINS FAILURE (AMF) Panel with IP 52 protection , fabricated from CRCA sheet steel 2mmThick , Powder coated finish , Engine START & STOP commands,control RELAYS, selector switches for Ammeter & Voltmeter, Ammeter & Voltmeter ,4pole MCCBs for EB Supply and DG Supply of required rating and breaking capacity,Automatic battery charger (External charger for DG) Control & Power Contactors, Timers, Electronic Hooter ,Visual & Alarm indication for faults, UPS, operator interface panel complete in all respect suitable for160 KVA capacity DG set. including cost, conveyance of all materials to site and labour charges for all operations etc., complete as per SS and as directed by the departmental officers.

Providing 250 KVA Transformer, 160 KVA DG set and Panel boards to the Old Municipal Office (Used for;Construction of pedestal for 160 KVA DG set of size (4.40x1.95x0.65) and providing earth work excavation of size (4.70x2.25) , PCC (1:4:8) and VRCC(1:2:4) mix with reinforcement for pedestal andalround sand bed including cost and conveyance of all materials to site and labour charges for all operations etc., complete as per SS and as directed by the departmental officers.

Providing 250 KVA Transformer, 160 KVA DG set and Panel boards to the Old Municipal Office (Used for;Supply Installation Testing and commissioning of free standing floor mounted dust and vermin proof compartmentalised cubical outdoor panel made out of CRCA sheet, required hardware, duly painted by two coats of zinc /red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3mm thickness,separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear. Thickness of sheet shall not be less than 1.6mm up to 600mm length/width of any compartment and be of 2.0mm above 600mm. Load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (Panel to be fabricated from CPRI approved fabricator) with 1No. 400A 4 Pole MCCB,Adjustable, Confirms to IEC 60947-2 and IS 13947 Part 1&2 having Breaking Capacity 36/35 KAwith thermal magnetic release Panel Mounted of makes L&T- D shine / Schneider-CVS / Legrand ?(DPX3/DRX) / Siemens- 3VL / Hager-h3 /C&S Winbreak / HPL-Techno. Including cost, conveyance of all materials to site and labour charges for all operations etc., complete as per SS and as directed by the departmental officers

Providing 250 KVA Transformer, 160 KVA DG set and Panel boards to the Old Municipal Office (Used for;Supply Installation Testing and commissioning of free standing floor mounted dust and vermin proof compartmentalised cubical panel made out of CRCA sheet, required hardware, duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3mm thickness,separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear. Thickness of sheet shall not be less than 1.6mm up to 600mm length/width of any compartment and be of 2.0mm above 600mm. Load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (Panel to be fabricated from CPRI approved fabricator) INCOMER: 1No. of 400A 4 Pole MCCB having Breaking Capacity 36/35 KA , 3Nos. Current Transformer 400/5 Ratio , 10 VA , class 1 accuracy of makes Kappa/ L&T/ Seimens /C&S/ Schneider, 6 Nos. RYB LED indicator lamps , 1No. 0-500V Digital meter & 1No. Digital Ammeter of makes: Conzerve /Elmeasure/ Meco/HPL / L&T/ socomec & OUTGOINGS: 2Nos. 250A 3 Pole MCCB Breaking Capacity 36/35KA and 2Nos.125A 3 Pole MCCB Breaking Capacity 25 KA of makes L&T- D shine / Schneider-CVS/ Legrand ?(DPX3 / DRX) / Siemens-3VL / Hager-h3/ C&S -Winbreak /HPL-Techno terminated to RYBN Alluminium Bus Bars with PVC Heat shrinkable Sleeves,Spreader terminals, Crimping type Aluminium lugs including nuts and bolts with connections, glands, Control wiring with Copper wire of makes Finolex / RR kabel & body earthing etc., including cost and conveyance of all materials and labour charges. complete as per SS and as directed by the departmental officers

Providing 250 KVA Transformer, 160 KVA DG set and Panel boards to the Old Municipal Office (Used for;Supply Installation Testing and commissioning of 100 KVAR Capacitor Bank Panel of free standing floor mounted dust and vermin proof compartmentalised cubical panel made out of CRCA sheet, required hardware, duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3mm thickness,separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear. Thickness of sheet shall not be less than 1.6mm up to 600mm length/width of any compartment and be of 2.0mm above 600mm. Load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (Panel to be fabricated from CPRI approved fabricator) suitable for fixing of INCOMER: a) 160A 4 Pole MCCB having Breaking Capacity 25 KA of makes L&T- D shine / Schneider-CVS/Legrand ?(DPX3/DRX) / Siemens- 3VL / Hager-h3/C&S -Win break / HPL-Techno- 1 No., b) 4No. MXO Auxiliary Contactor of make L&T - 4Nos., c) (0-500) V range Digital type Volt meter - 1No., d) Digital type Ammeter of makes of make: Conzerve /Elmeasure/Meco /HPL /L&T /Schneider /AE /Socomec - 1No., e) 6 to 14 stage - sensitivity upto 50 milli Amp microprocessor based intelligent power factor correction relay having sensitivity up to 50 milli Amp secondary current and following way, self analysing auto c/k setting according to targeted power factor setting, the relay shall have minimum three digit display unit for display of real power factor, targeted power factor, lag/lead capacitor switching status, alarm output for under current, over current, insufficient compensation, indication of switching on units, auto/manual status, and shall have over load protection, no volt release etc. as required.of makes L&T/Seimens/Epcos /Schneider/ ABB/Neptune - 1No., f) LT current transformer with bar primary 160 /5A ratio in the existing box / panel 3No's. (For metering), g) LT current transformer with bar primary 600/5A ratio in the existing box / panel of make e: Kappa/L&T/ Seimens/ C&S / Schneider -1No.(For APFC Sensing), h) LED indicator lamps on the existing box / panel board. L&T / C&S / SALZAR / HPL -3No's.,i) 6-32A 10KA DP MCB - 2 No's., j) 6-32A, 10KA, SP, MCB of make Legrand-DX3 / Schneider-A9/Hager-h3/ Siemens5SX4/ Havells STADx /L&T-AU /Indo Asian-Opti pro/ HPL (Techno) - 4No's., k)16A Neutral link of Suraj make - 2Nos., OUTGOINGS:- 20kVAR Capacitor feeders-1No. (Fixed for Transformer) a) 63A TPN Switch Disconnector Fuse Unit Cubical type with 3Nos. HRC Fuse Links of makes: L&T / G E / C&S / ABB / SIEMENS-1 No., b) 20 KVAR Heavy duty Three phase 440 V , 50 Hz capacitor (Bank) self healing MPP/MP type shunt capacitor (banks) conforming to IS:13340-41 / IEC :831-1&2 in existing panel or parallel with load terminals , the capacitor shall be fitted with discharge resistors, pressure sensitive disconnector ( PSD) and shall have dissipation factor less than 0.0025 at 50Hz and total wattage loss less than 0.5 Watt per KVAR. including making connections with suitable capacity conductors/cables testing as required of makes L&T/ Seimens/ Epcos/ Schneider/ Havells - 1No., 20kVAR Capacitor feeders - 3Nos. (Variable) a) 63A TPN Switch Disconnector Fuse Unit Cubical type with 3Nos. HRC Fuse Links of makes:L&T / Schneider / C&S / ABB / SIEMENS-3 Nos., b) 20 kVAR Capacitor Duty Power Contactor of makes Seimens /ABB/ Schneider /L&T /C&S /HPL/Havells - 3Nos., c) 20 KVAR Heavy duty Three phase 440 V , 50 Hz capacitor (Bank) self healing MPP/MP type shunt capacitor (banks)- 3Nos., d) ON/OFF LED indicator lamps on the existing box / panel board of makes L&T / C&S / SALZAR / HPL-6No's., e) ON/OFF Push Buttons,R/G of make L&T / C&S / SALZAR / HPL - 6Nos., f) Auto/manual Selector Switch of L&T/HPL - 3Nos., h) 6-32A, 10KA, SP, MCB - 3Nos., i) 16A Neutral link of Suraj make - 3Nos., 10 kVAR Capacitor feeders-2Nos.(Variable) a) 32A TPN Switch Disconnector Fuse Unit Cubical type with 3Nos. HRC Fuse Links -2 Nos., b) 10 KVAR Capacitor Duty Power Contactor - 2Nos., c) 10 KVAR Heavy duty Three phase 440 V , 50 Hz capacitor (Bank) self healing MPP/MP type shunt capacitor (banks)- 2Nos., d) ON/OFF LED indicator lamps on the existing box / panel board -4No's., e) ON/OFF Push Butons,R/G - 4Nos., f) Auto/manual Selector Switch -2Nos., h) 6-32A, 10KA, SP, MCB- 2Nos., i) 16A Neutral link of Suraj make - 2Nos., terminated to mains with E 91 E Grade,TPN Alluminium Bus Bars with PVC Heat Shrinkable Sleeves along with control wiring , Spreader Link Kits, lugs,glands, body earthing etc., including cost and conveyance of all materials and labour charges. complete as per SS and as directed by the departmental officers.

Providing 250 KVA Transformer, 160 KVA DG set and Panel boards to the Old Municipal Office (Used for;Providing transformer plinth 1.2 x 1.2 x 1.5 mtr in size with necessary excavation in ground at the bottom with 150mm thick 1:2:4 cement concrete raft at the bottom and top and 225mm thick wall constructed in stone masonry and remaking hallow portion shall be filled with stone chips duly plastered 20mm thick outsides including watering etc., complete . including cost, conveyance of all materials to site and labour charges for all operations etc., complete as per SS and as directed by the departmental officers.

Providing 250 KVA Transformer, 160 KVA DG set and Panel boards to the Old Municipal Office (Used for;Supply and Transportation of 3C X 120 Sqmm XLPE insulated IS:7098 / II / 85 H.T.cable for working voltage 11 K.V Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanised flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc complete of make Torrent / Universal / Unicab / Havells / KEI/ Polycab / Gloster /RR Kabel/RPG . Including cost and conveyance of all materials etc., as per the technical specification, SS and as directed by the departmental officers

Providing 250 KVA Transformer, 160 KVA DG set and Panel boards to the Old Municipal Office (Used for;Supply and Making 3 core 120 sqmm heat shrinkable type OUTDOOR end termination kit of approved make suitable for XLPE insulated 11 KV cable, with required components , prepration of cable ends, testing etc. of makes Raychem / M seal / Denson/ Multy / Transeal Hongshang . Including cost and conveyance of all materials etc., as per the technical specification, SS and as directed by the departmental officers

Providing 250 KVA Transformer, 160 KVA DG set and Panel boards to the Old Municipal Office (Used for;Supply and transportation of 300 Sqmm X 3.5 core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) / 1554-I of make Torent / Universal / Unicab / Havells / KEI /Gloster/ Finecab / Polycab /RR Kabel / Fortune Arrt. Including cost and conveyance of all materials etc., as per the technical specification, SS and as directed by the departmental officers.

Providing 250 KVA Transformer, 160 KVA DG set and Panel boards to the Old Municipal Office (Used for;Supply and transportation of 240SqmmX 3.5 core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) / 1554-I of make Torent / Universal / Unicab / Havells / KEI /Gloster/ Finecab / Polycab /RR Kabel / Fortune Arrt. Including cost and conveyance of all materials etc., as per the technical specification, SS and as directed by the departmental officers

Providing 250 KVA Transformer, 160 KVA DG set and Panel boards to the Old Municipal Office (Used for;Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for 3.5core x 300 sq.mm size of Armoured PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1100 volt grade as required of make Dowels/Comet/SMI. Including cost and conveyance of all materials etc., as per the technical specification, SS and as directed by the departmental officers

Providing 250 KVA Transformer, 160 KVA DG set and Panel boards to the Old Municipal Office (Used for;Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for 3.5core x 240 sq.mm size of Armoured PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1100 volt grade as required of make Dowels/Comet/SMI. Including cost and conveyance of all materials etc., as per the technical specification, SS and as directed by the departmental officers

Providing 250 KVA Transformer, 160 KVA DG set and Panel boards to the Old Municipal Office (Used for;Earth work excavation of Trench in hard ground soil of size (0.3 x 0.9 m), laying of U.G cables on sand cushion covering the cable with bricks and back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete . including cost and conveyance of materials and labour charges etc., complete as per the technical specification, SS and as directed by the departmental officers

Providing 250 KVA Transformer, 160 KVA DG set and Panel boards to the Old Municipal Office (Used for;Labour charges for run of U.G cable on wall / existing trench with necessary fixing arrangments such as saddles, clamps,wooden separators etc., with No.10 SWG G.I wire for earth connections for the cables. Including cost of all material and labour charges for all operations etc., complete as per SS and directed by the departmental officers

Providing 250 KVA Transformer, 160 KVA DG set and Panel boards to the Old Municipal Office (Used for;Providing Independent earthing with excavation of earth pit of size (0.6 x 0.6 x 3.15 m) with 600 mm X 600 mm X 3.15 mm thick Copper plate rigidly fixed to 40 mm dia G.I pipe of 2.5 mtr length and 19mm dia G.I pipe with G.I funnel for watering connected with reducer providing with wiremesh as per National Electric Code including C.C chamber of size 400 mm x 400 mm x 400 mm covered with R.C.C Slab filling with Salt and Charcoal giving earth connection from electrode Copper strip of 25mm x 6mm x 3 mtrs length with all accessories as per IS specification 732/1982 (Part-II). including cost, conveyance of all materials to site and labour charges for all operations etc., complete as per SS and as directed by the departmental officers

Providing 250 KVA Transformer, 160 KVA DG set and Panel boards to the Old Municipal Office (Used for;Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Important equipment with 2.5Mtr length 40mm dia 'B' class G.I pipe and 18" dia 3" thick hume pipe ring with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 x 6mm x 200mm length to be bolted with nut bolts including supply and termination of No.8 G.I.wire from bottm of the pipe with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II). including cost, conveyance of all materials to site and labour charges for all operations etc., complete as per SS and as directed by the departmental officers

Providing 250 KVA Transformer, 160 KVA DG set and Panel boards to the Old Municipal Office (Used for;Supply and laying of 25mm x 3mm Copper Flat (0.663 Kgs / 1Mtr) sizes in horizontal /Vertical run in Ground / surface / Recess including, revitting, soldering, saddles, making connection etc as required. Including cost of all material and labour charges for all operations etc., complete as per SS and directed by the departmental officers

Providing 250 KVA Transformer, 160 KVA DG set and Panel boards to the Old Municipal Office (Used for;Supply and laying of 25mm x 6mm GI Flat (1.18Kgs/1Mtr) sizes in horizontal /Vertical run in Ground/surface/Recess including, revitting, soldering, saddles,making connection etc as required. Including cost of all material and labour charges for all operations etc., complete as per SS and directed by the departmental officers

Providing 250 KVA Transformer, 160 KVA DG set and Panel boards to the Old Municipal Office (Used for;Supply and laying of 50 mm x 6mm GI Flat (2.5 Kgs / mtr) sizes in horizontal /Vertical run in Ground / surface / Recess including, revitting, soldering, saddles,making connection etc as required. Including cost of all material and labour charges for all operations etc., complete as per SS and directed by the departmental officers

Providing 250 KVA Transformer, 160 KVA DG set and Panel boards to the Old Municipal Office (Used for;Supply and fixing of ISI mark (IS:15683) Mono ammonium phosphate powder 90 (MAP) 4 Kg Fire extinguisher, stored pressure type, pressure gauge, gross wt. 6.9 kg, empty wt.2.9 kg, Discharge time minimum 13 sec, controllable discharge mechanism , range min. 4 mts applicable on classes A,B, C & electrically started fire, A rating -3 A, B rating -34 B, can construction: Deep drawn and Co2 mig welding, Valve construction: Forging & Machining, internal coating of can: Epoxy powder coating, External coating of Can:Epoxy polyster powder coating, sheet metal thickness : 1.60mm, Helium leak detection tested with 5 years warranty Including transportation and all labour charges etc complete of makes Safex / Kenex / Bharat /Reliance /NewTech /Kartar . Including cost and conveyance of all materials etc., as per the technical specification, SS and as directed by the departmental officers

Providing 250 KVA Transformer, 160 KVA DG set and Panel boards to the Old Municipal Office (Used for;Supply and fixing of 4Nos of 9 Ltrs capacity round bottom sand buckets along with bucket sand, Fire buckets with round bottom type enamel painted, white inside & red out side and letter FIRE inblack out side & Handle with mounting bracket. . Including cost and conveyance of all materials etc., as per the technical specification, SS and as directed by the departmental officers

Providing 250 KVA Transformer, 160 KVA DG set and Panel boards to the Old Municipal Office (Used for;Supply and fixing of Fire bucket stand fabricated by M.S. angles to install for Four numbers of buckets as per local fire officers standards. Including cost and conveyance of all materials etc., as per the technical specification, SS and as directed by the departmental officers

Providing 250 KVA Transformer, 160 KVA DG set and Panel boards to the Old Municipal Office (Used for;Supply and fixing of Escape signage boards in Rigid Photo luminecent based glow in Dark rigid sheet with high intensity luminous properties with specificaiton of make Cease Fire or its equivalent make Model-1ES01 . Including cost and conveyance of all materials etc., as per the technical specification , SS and as directed by the departmental officers

Providing 250 KVA Transformer, 160 KVA DG set and Panel boards to the Old Municipal Office (Used for;Supply and fixing of PVC synthetic elastomer electrically insulated mat conforming to IS: 15652-2006 with Class B insulation having 2.5mm thickness upto 11KV . Including cost and conveyance of all materials etc., as per the technical specification, SS and as directed by the departmental officers

Providing 250 KVA Transformer, 160 KVA DG set and Panel boards to the Old Municipal Office (Used for;Supply of Shock instrution chart in English / Hindi / Telugu duly framed with front glass . Including cost and conveyance of all materials etc., as per the technical specification, SS and as directed by the departmental officers

Providing 250 KVA Transformer, 160 KVA DG set and Panel boards to the Old Municipal Office (Used for;Supply of 11 KV/ 22 KV Hand gloves . Including cost and conveyance of all materials etc., as per the technical specification, SS and as directed by the departmental officers

Providing 250 KVA Transformer, 160 KVA DG set and Panel boards to the Old Municipal Office (Used for;Supply of First Aid box 18" x 12" x 8" . Including cost and conveyance of all materials etc., as per the technical specification, SS and as directed by the departmental officers