Visakhapatnam Metropolitan Region Development Authority Tender

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Brick Masonry for super-structure on ground floor (11.0 cm thick) in CM (1:4) prop. (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sq.cm and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., and overheads & contractors profit complete for finished item of work.

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Ornamental ceiling plastering 12mm thick single coat in CM (1:3) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904)

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Plastering 12mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904)

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with integral cement water proofing liquid confirming to IS: 2645-2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, including sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 90

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Flooring with soluble salt porcelain vitrified tiles screen printed and polished of size 600 x 600 mm and thickness between 8 to 10mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistency spread @ 3.3 kgs per Sqm. and jointed neatly with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc., and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Flooring with non-skid full body ceramic floor tiles of size 300mm x 300mm and thickness between 7 - 8mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water and tiles etc., and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Providing dadooing to walls with glazed full body ceramic tiles of any size and thickness between 5 to 7mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and overheads & contractors profit complete for finished item of work.

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Supply & application of one coat water based cement primer of interior grade I and two coats of acrylic emulsion paint and two coats of Putty (total 5 coats) having VOC (Volatile Organic Compound) content less than 50 grams/litre for internal walls including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Supply & application of one coat water based cement primer of exterior grade II and two coats of acrylic exterior emulsion paint and two coats of Putty (total 5 coats) having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Supply and fixing ofof UV resistant multi-wall polycarbonate sheets for roofing of any colour - 6 mm thick including cost and conveyance of materials, overheads & contractors profit, nails, cuting charges etc, complete as directed during execution. (IS: 14862 - 2000) BMT-E.21

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Supply and fixing doors as per drawings with Salwood/country wood frame of section 100mm x 65 mm and ISI marked flush door shutters of 30 mm thick single shutter with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder coated fixtures of 3 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 1 No. door stopper and 1 No. rubber bush including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc, including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (900mm x 2100mm)

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) sliding windows two track sliding duly manufactured using UPVC reinforced profiles of (62 mm x 60 mm)/(60 mm x 45 mm) x 2.0 mm for outer frames, (66 mm x 38 mm)/(58 mm x 39 mm) x 2.0 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with TPV Gaskets/ EPDM weathering seal resistant accessories like locking system 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing, overheads and contractors profit etc., complete for finished item of work.

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Providing, supplying & fixing of Top hung Ventilator with exhaust fan provision made out of multi chambered UPVC sections with TPV gaskets having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall size of 60 x 55 mm with reinforcement of 1 mm thickness, Mullion with overall size of 74 x 60 mm with reinforcement of 1 mm thickness and Sash with overall size of 75 x 60 mm with reinforcement of 1.5 mm thickness. Glazing bead for fixing of glass shall be of size 34 x 20 mm coextruded with gasket. Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware, single point locking and friction stays. Wall thickness of frame, mullion and sash shall be 2.0 mm including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site, overheads and contractor profit etc., complete for finished item of work.

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Supplying and fixing of SWR PVC pipes (Prince /Sudhakar/ Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326). 75 mm dia

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Supplying and fixing of SWR PVC pipes (Prince /Sudhakar/ Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326). 110 mm dia

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, complete for finished item of work at all floor levels as per SS and as directed by the departmental officers. 15.90mm OD pipe

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, complete for finished item of work at all floor levels as per SS and as directed by the departmental officers. 28.60mm OD pipe

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of white glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern with internal components and fixed using required size of nails and screws, angle stop cock 12.70mm dia. first quality Indian make heavy duty, 12mm PVC connections with brass union nuts CP coated including cost and conveyance of all materials to site etc., complete for finished item of work for all floors. as per SS and as directed by the departmental officers.

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Supplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , angle stop cock 12.70mm dia. first quality Indian make heavy duty, 31.75mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , complete for finished item of work as per SS and as directed by the departmental officers.

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Supplying and fixing NP bib taps of size 12.70mm dia of Indian make heavy duty as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges , complete for finished item of work in all floors.as per SS and as directed by the departmental officers.

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber upto 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per SS and as directed by the departmental officers.

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Supplying and fixing of 4" (110mm) multi floor trap with jali - UPVC/SWR pipe fittings as per site requirements with standard practice for all floors including cost and conveyance of all materials to site, labour charges , overheads & contractors profit etc., complete for finished item of work.

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Providing and placing on terrace (at all floor levels)polyethylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work.

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Supplying and fixing white glazed flat back half stall urinals of size 590 mm x 375 mm x 390 mm with integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make , 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges etc., overheads & contractors profit complete for finished item of work for all floors.

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (Page No.484)

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size (SS5) hard granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges,all taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers, finishing top surface to the required level, curing etc., complete for finished item of work as per standard specifications and as directed by Engineer in charge.

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Vibrated cement concrete (V.C.C. grade M 20 Design Mix) (MORTH 12.8 G)using 20 mm and 12mm graded HBG metal including cost and conveyance of all materials land labour charges for centering, machine mixing, laying, vibrating and curing etc. including all other incidental charges of all T&P etc. for finished item of work as per MoRTH apecifications 1500, 1700, 2100 and 2702 and as directed by the depermental engineers in charge. RBR-FNDN-4-C-(i)

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Supply, delivery and running of 25 mm dia 1.80 mm thick surface PVC pipe (ISI mark) concealed in wall with junction boxes, Bends with all required accessiries etc., including wall cutting & masonary work for light, fan and separate plug point of makes Sudhakar / Modi / VIP / GM . Including cost of all material and all labour charges etc., complete as per SS and as directed by the departmental officers.

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Wiring with 2 runs of 1.50 Sq.mm FRLS / HFFR PVC isolated ISI insulated Flexiible copper cable of ISI marked of make Finolex /RR kabel in existing pipe with 6A/10A 1way modular switch, celiing rose , cover to modular switch control box etc.. of makes Legrand Arteor / Schneider Zen celo / MK Blenge. Including cost of all material and all labour charges etc., complete as per SS and as directed by the departmental officers. Light point

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Wiring with 2 runs of 1.50 Sq.mm FRLS / HFFR PVC isolated ISI insulated Flexiible copper cable of ISI marked of make Finolex /RR kabel in existing pipe with 6A/10A 1way modular switch, celiing rose, cover to modular switch control box along with Socket type Electronic regulator of Legrand Arteor / Schneider Zen celo / MK Blenge etc. Including cost of all materials and all labour charges etc., complete as per SS and as directed by the departmental officers. Fan point

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Supply and fixing of 6A / 10A 1 Way 1 Module Modular Switch & 5 pin modular socket on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. of makes Legrand Arteor / Schneider Zen celo / MK Blenge. Including cost of all material and labour charges for all operations etc., complete as per SS and as directed by the departmental officers.

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Supply,delivery and Run of 3 of 2.5 Sqmm FRLS/HFFR PVC isolated ISI insulated Flexible copper cable laid in the existing pipe of makes Finolex /RR kabel. Including cost of all material and all labour charges etc., complete as per SS and as directed by the departmental officers.

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Supply, delivery and fixing of 20W, 2000 lumens T8, , not less than 1100 mm length LED retrofit tube light with aluminium anodised body, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete. as per IS 10322 (Part 5/ Sec 1)..2012 of makes Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix /Jaquar/ HPL/GM / GreenLites /Gold Medal/Eveready .Including cost of all material and labour charges for all operations etc., complete as per SS and directed by the departmental officers. [SSRNo:152 ELEC-3.8.16]

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Supply, delivery and fixing of 8 Way SPN DB Horizontal with IP-43 Protection as per IS 8623; IS 13032; IEC 61439-3 and suitable for fixing incommers 1No. 2 pole 40A Isolator & Outgoings 8Nos. (6-32Amps) 10kA SP MCB?s of make Legrand-DX3 / Schneider-A9/Hager-h3/ Siemens- 5SX4/ Havells STADx/L&T-AU/Indo Asian-Optipro/HPL(Techno) . Including cost of all material and all labour charges etc., complete as per SS and as directed by the departmental officers.

Providing balance works for completion of the Koisk 1 to 2 Nos., Koisk 2 to 4 Nos. etc., at Kailasag;Fabrication and placing of Tor steel/Fe 415 grade steel reinforcement confirming to IS-226 and 1786-1985 of SAIL/ VSP/ TISCON or any approved TMT of different diameters including straightening, cutting & bending to required sizes & shapes, placing in position with cover blocks of approved material & size, including lift charges for all floors, tieing firmly with MS binding wire of 18 guage, forming grills for reinforcement work as per approved design & drawings (to be supplied at the time of executing the work) including cost, all taxes and conveyance of steel and all materials to site including all wastages such as overlaps, couplings, welded joints, chairs, space bars, binding wire, cover blocks and all operational, incidential, labour charges etc., complete for finished item of work as per standard specifications and as directed by Engineer in charge. (APSS No.126)