Tribal Welfare Engineering Department Tender

Vibrated Plain/reinforced cement concrete M 20 Grade Concrete using 40mm, 20mm and 10mm size HBG crushed stone aggregate (Coarse aggregate conforming to table 1000.1 and fine aggregate conforming to table 1000-2) including cost, seigniorage and conveyance of all materials to site and all labour charges for machine mixing, laying in position, compacting, vibrating and curing including all other incidental and all other operational charges of T&P required etc, as per techinical specification MORTH & H 1500,1700,2100( 4th revision) and 802, 803, 1202 &1203 MORD complete for finished item of work for footings of Abutments, Piers, Wing Walls and Raft Foundations

Vibrated Plain Cement Concrete M15 grade using 40mm,20mm & 10mm HBG machine crushed stone aggregate conforming to table 1000.1 and fine aggregate conforming to table 1000.2) including cost, seigniorage and conveyance of all materials to site and all labour charges for machine mixing, laying in position, compacting, vibrating and curing including all other incidental and all other operational charges of T&P required etc, as per techinical specification MORTH & H 1500,1700,2100( 4th revision) and 802, 803, 1202 &1203 MORD complete for finished item of work for footings of Abutments, Piers, Wing Walls and Raft Foundations

Vibrated Reinforced Cement Concrete M25 grade using 20mm & 10mm HBG crushed stone aggregate conforming to table 1000.1 and fine aggregate conforming to table 1000.2) including cost, seigniorage and conveyance of all materials to site and all labour charges for centring, machine mixing, laying in position, vibrating and curing including all other incidental hire and all other operational charges of T&P required etc, complete as per approved drawings and as directed during exection but excluding cost of steel and its fabrication charges for finished item as per MORTH specification 1500, 1600, 1700 & 2200( 4th revision) and 800, 1205.4, 1205.5 MORD and as directed by the Engineer-in-Charge for Deck Slab & Bed Blocks

Vibrated Reinforced Cement Concrete M30 grade using 20mm & 10mm HBG crushed stone aggregate conforming to table 1000.1 and fine aggregate conforming to table 1000.2) including cost, seigniorage and conveyance of all materials to site and all labour charges for centring, machine mixing, laying in position, vibrating and curing including all other incidental hire and all other operational charges of T&P required etc, complete as per drawing BD81-69 (A) but excluding cost of steel and its fabrication charges for finished item as per MORTH specification 1500, 1600, 1700 & 2702 ( 4th revision) and 800, 1205.4, 1206.3 MORD and as directed by the Engineer-in-Charge for finished item of work for wearing coat over Deck Slab

Vibrated Reinforced Cement Concrete M25 grade using 40mm, 20mm & 10mm HBG crushed stone aggregate conforming to table 1000.1 and fine aggregate conforming to table 1000.2) including cost, seigniorage and conveyance of all materials to site and all labour charges for centring, machine mixing, laying in position, vibrating and curing including all other incidental hire and all other operational charges of T&P required etc, complete as per approved drawings and as directed during exection but excluding cost of steel and its fabrication charges for finished item as per MORTH specification 1500, 1600, 1700 & 2704( 4th revision) and 800, 1211 MORD and as directed by the Engineer-in-Charge for completed for finished item of work for Approach Slab

Construction of RCC railing of M25 grade using HBG crushed stone aggregate of size not exceeding 20 mm and fine aggregare conforming to table 1000-2 true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical posts not to exceed 2000mm, leaving adequate space between vertical posts for expansion including cost conveyance of all materials to site and seigniorage charges, labour charges for centring, machine mixing, laying concrete in postition, vibrating, curing etc., including other incidental hire and operational charges of all T&P as per approved drawings and as directed during execution, excluding cost of steel and its fabrication charges as per approved drawings and technical specifications as per MoRT&H 2703, 1500, 1600, 1700 (4t Revision) and 800, 900 and 1208.3 MORD complete for finished item of work as per standard plans of MORTH vide drawing No.SD/202

Providing weep holes in plain/reinforced concrete Abutments, Return Walls and Wing walls with 100mm Diameter AC pipe extending through the full width of the structure at 1.00mm C/C in both horizontal and vertical direction so that the weep holes in each horizontal direction is staggered from the weep holes laying above and below lines as shown in drawing including cost and conveyance of the A.C pipes and labour charges for cutting to required length, placing the pipe with a slope of about 1V : 20H towards stream side face etc., as per technical specification MoRT&H 2706 & 2200 (4th Revision), 614, 709, 1204.3.7 MORD complete for finished item of work for weep holes.

Providing and fixing in position 25mm thick mastic pad in expansion joint 650mm deep for fixed ends of simply supported spans, covered with selant including cost and conveyance of all material to site and labour charges as per drawing and technical specifications 1207.2 MORD / 2600 MORTH complete for finished item of work

Supply and fixing of drainage spouts including cost and conveyand of all materials to site and labour charges etc., as per drawing and technical specification MoRT&H 2705 and 1209 MORD as per MOST drawing no. SD/103 complete for finished item of work.

Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efforescence and applying paint @ of 1 litre for 2 Sqm as per Tech. Specification including cost of labour and OH&CP complete for finished item of work.

Providing and laying filter media using 50% of 150mm IRC soiling stone and 50% of 40mm HBG metal satisfying the requirements laid down in clause 2504.2.2 of MoRT&H specifications to a thickness of not less than 600mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind the abutment, wing wall and return wall to the full height compacted to a firm condition including cost and conveyance of all metal seignorage charges and all labour charges as directed by the departmental officers as per drawing and technical sp[ecifications as per clause 710.1.4 of IRC:78 and Clause 2200 of MoRT&H (4th revision) and 1204.3.8 MORD complete for finished item of work

Back filling behind Abutments with gravel including cost and conveyance of all materials to site, and seigniorage charges of all materials and labour charges etc., complete as per Clause 710.1.4 of IRC : 78 and as per MoRT&H Specification No. 2200 (4th Revision) and 1204.3.8 MORD as per Drawing and complete for finished item of work.

Providing HYSD Bars (Fe-500) of different diameters, wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinforcement including cutting, bending, binding, binding rods, tying grills, placing them in postition etc., complete including cost and conveyance of binding wire and all handling charges and operation charges etc., and including over lapping welding if required etc., complete for all R.C.C. items for finished item of work as per standard drawing, as per the directions of the Engineer-in-Charge and as per technical specification MoRT&H 1600 & 2200 (4th revision) and 1002, 1005, 1010, 1202 MORD and as per I.S.1786 of 1985 complete for finished item of work for Foundation

Providing HYSD Bars (Fe-500) of different diameters, wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinforcement including cutting, bending, binding, binding rods, tying grills, placing them in postition etc., complete including cost and conveyance of binding wire and all handling charges and operation charges etc., and including over lapping welding if required etc., complete for all R.C.C. items for finished item of work as per standard drawing, as per the directions of the Engineer-in-Charge and as per technical specification MoRT&H 1600 & 2200 (4th revision) and 1002, 1005, 1010, 1202 MORD and as per I.S.1786 of 1985 complete for finished item of work for Sub Structure

Providing HYSD Bars (Fe-500) of different diameters, wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinforcement including cutting, bending, binding, binding rods, tying grills, placing them in postition etc., complete including cost and conveyance of binding wire and all handling charges and operation charges etc., and including over lapping welding if required etc., complete for all R.C.C. items for finished item of work as per standard drawing, as per the directions of the Engineer-in-Charge and as per technical specification MoRT&H 1600 & 2200 (4th revision) and 1002, 1005, 1010, 1202 MORD and as per I.S.1786 of 1985 complete for finished item of work for Super Structure

Providing and laying stone boulders for apron for bed protection with jeddy stone of minimum size 450 to 600mm other than granite (OTG) and weight as per Table 1300.1, laid dry including cost and conveyance of all materials to site, seigniorage charges and labour charges as per drawing and technical specifications Clause 1301 MORD / 2503 MORTH complete for finished item of work

TOTAL NUMBER OF ITMES 19 (NINETEEN ) ITEMS ONLY