Tourism Department Tender

Supply and fixing doors as per drawings with 2nd class teak wood frame of section 125mm x 75mm and ISI marked Providing and fixing 28 -30 MM thick solid Wood Polymer Composite (WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame shutter door, providing internal teak wood lipping on all sides including cost and conveyance to site of teak wood frame , flush shutter including supply and fixing 3 Nos.MS Z hold fasts of size 300mm x40mm x4mm including cost of ISI marked 3 Nos MS Power coated butt hinges 125 mm long, 2 Nos MS Power coated tower bolts of 150 mm dia at top, 1no. MS Power coated tower bolt of 150 mm long at bottom, 2 nos 250 mm long MS Power coated aldrops, 2 no heavy duty MS Power coated door stoper, 2 nos rubber bushes including fixing and fixtures to door with required number of screws,bold and nuts including labour charges for fixing the frame in position,fixing the shutter to the frame etc, complete for finished item of work as per APSS 1001 & 1002.

Supply and fixing of pre-painted steel openable windows base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 , finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 46 x 52 mm section and for shutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading should be 18 x 25 mm with 5 mm thick plain float glass fitted with Ethyl propylene Diamine monomer Gasket (EPDM) and handle made of high grade aluminium powder coated with frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch complete for finished item of work .

Providing and fixing of top hung Ventilators made of pre-painted steel (Base steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc of 120 GSM), finish painted with a polyester paint of 60-65 microns thick and section for outer frame of 80 x 45 mm, centre mullion of 80 x 60 mm, section for shutter of 52 x 25 mm x 0.6 mm thick, outer frame and mullions to have rebate for glazed shutter with a provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10 mm Square guard bars with 6” (152.4mm) pitch etc., complete for finished item of work.