Sri Padmavati Mahila Visvavidyalayam Tender

Arresting leakages for walls and flooring repairs in MBA building in SPMVV Tirupati;Dismantling, clearing away and carefully stacking materials useful for re-use, old Cement mortar plaster

Arresting leakages for walls and flooring repairs in MBA building in SPMVV Tirupati;Dismantling doors, windows and clear storey windows, ventilators etc, (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc., complete and stacking them within 100 metres lead.Not exceeding 3 sq.m in area.

Arresting leakages for walls and flooring repairs in MBA building in SPMVV Tirupati;Providing weather proof course with Screeding concrete in CC(1:2:4), 25mm average thickness using 6 to 10mm nominal size HBG crushed metal chips, screeding duly embedding 24G chicken mesh with necessary overlap etc.., and finishing the surface neatly and rounding the edges at parapet walls, columns etc.., excluding cost of chicken mesh but including cost and conveyance of all materials etc..., complete as directed during execution.

Arresting leakages for walls and flooring repairs in MBA building in SPMVV Tirupati;Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sq.m & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials, etc., complete for finished item of work.

Arresting leakages for walls and flooring repairs in MBA building in SPMVV Tirupati;Providing skirting to internal walls to the following heights / risers of steps with vitrified tiles length equal to flooring stones, set over base coat of CM (1:3) 12mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sq.m and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost and conveyance of all materials, etc., complete - for finished item of work.Supply of Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs

Arresting leakages for walls and flooring repairs in MBA building in SPMVV Tirupati;Plastering in Cement mortar (1:3) 12 mm thick using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete.

Arresting leakages for walls and flooring repairs in MBA building in SPMVV Tirupati;Plastering in Cement mortar (1:5) 12 mm thick using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete.

Arresting leakages for walls and flooring repairs in MBA building in SPMVV Tirupati;Plastering in Cement mortar (1:5) 20 mm thick using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete.

Arresting leakages for walls and flooring repairs in MBA building in SPMVV Tirupati;Painting to new walls with single coat of primer and 2 coats of Acrylic Exterior Emulsion paint - (external) of approved brand and shade over a base coat of primer total 3 coats after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for External walls

Arresting leakages for walls and flooring repairs in MBA building in SPMVV Tirupati;Providing post construction Anti termite treatment to the existing buildings inside and outside in various stages of tratment along the external perimeter of the building, treatment to wall and floor junction, treatment to soil under the floor, treatment to wooden furniture, treatment to termite tube and treatment to electrical fixtures as per standard specification of IS 6313 using chemicals of chlorpyrofos 20EC(IS8984), Lindane(IS632) in water emulsion and oil or kerosene based solution of specified concentration and dosage using hand operated pressure pump until refusal. The holes are to be with cement mortar after treatment and work shall be carried out with technical operator undre the supervision of special agency with vast experiance and as directed by the university engineer during the execution of work. The rate is inclusive of cost and conveyance of all materials and labour charges all taxes etc., for finished item of work warranty.

Arresting leakages for walls and flooring repairs in MBA building in SPMVV Tirupati;Supplying and fixing in position Flush doors of different sizes with 30 mm thick Flush Door Shutters, solid bond wood block board type with commercial ply on both faces of make standard , Conforming to IS 2202 solid core flush doors , with Commercial facing both sides with hot pressed bonded with liquid phenol formaldehyde with rebate cutting, Single leaf using Best Indian Country wood (Vepa/Neredu) frames of size 75mmx100mm without threshold plate, including cost of M.S. "Z" Hold fasts of 230 x 50 x 6mm, M.S. Powder coated Butt hinges of 125 x 65 x 2.12mm, screws, nails, etc., complete (excluding cost of other fixtures which will be paid separately but including labour charges for fixing the fixtures).

Arresting leakages for walls and flooring repairs in MBA building in SPMVV Tirupati;Painting with Ready mixed Synthetic Enamel paint in all shades -Grade-I approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

Arresting leakages for walls and flooring repairs in MBA building in SPMVV Tirupati;External wall damp proof coating :- 1.) Removing the exiting painting system with suitable method and site condition. 2.) Develop the cracks with diamond disc cutting machine for a minimum width of 4mm and a depth of equal to the crack or the thickness of the existing plastering. 3.) Remove the dust from the developed join with air blower. 4.) Apply one coat of MIXPRIME SB 300 without any modification or dilution @ 0.400 litres/ Sqm and allow to dry for a period 4 hours in the entire area including the inside of the developed cracks. 5.) Fill the developed cracks with MIXFLEX AC by using a notch trowel and allow to dry for a period of 24 hours. 6.) Apply on coat of sealer coat with MIXPRIME SB 300 modified with white cement and water in the ration of 2:1:2@500 litres/sqm. The necessary decorative painting system over it as per the requirement . Supply and apply of MIXCOAT SB 300 along with crack filling system MIXFLEX AC as per the above method statement and coverage including all labour materials tools and accessories.