Roads And Buildings Department Tender

Building;Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1993 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoat including overheads and contractor profit etc., complete for finished item of work (SSR Rate).

Building;Towards cost and supply of CARPET made up of velvette cloth of approved brand and colour for AP Human Rights Commission including cost and conveyance of carpet, labour charges for laying, etc., complete for finished item of work.

Building;Wall-Absorptive wall panelling:- Supply and installation of 17mm thick micro perforated wood having 2mm perforation and 8mm pitch backed with polyester wool of density 000GSM x 50mm thick with Laminared finish onstruction of Frame work: Frame work consists of 25mm thick GI wall channels with fully knurled surface of 0.55mm thick 80mm width, having two equal flanges of 26mm. A GI wall channel is fixed to the walls in horizontal direction with the help of suitable fastners at 600mm c/c then another 25mm thick GI wall channel is fixed vertically over the horizontally laid wall channel at 600mm c/c Cavity Filling: The frame work shall be back lined by using polyester wool having a density of 1000 GSM and 50mm thick Boarding: 17mm thick micro perforated wood having 2mm perforation and 8mm pitch is fixed on the frame work. Finishing: Ensure board is in plumb level and screw heads to be covered with compound and sand the surface. The screws are painted with manufacturer supplied paint matching the colour of the board/panel. The finishing of board is of veneer finish