Police Housing Corporation Limited Tender
... More
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Police Housing Corporation Limited - APSPHCL Tender
Opening Date29 May 2019
Closing Date14 Jun 2019
Tender Amount₹ 66,05,078
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
279562Bid Award Id
ViewTender No
A8/2019-20Tender Authority
Police Housing Corporation Limited ViewPurchaser Address
-Website
http://tender.apeprocurement.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
CEMENT CONCRETE (1:5:10) PROP. USING 40MM HARD GRANITE MACHINE CRUSHED METAL WITH MACHINE MIXING UP TO PLINTH LEVEL EXCLUDING SEIGNIORAGE CHARGES, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LAYING, CURING, FINISHING, ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK. FOUNDATION BED AND UNDER STONE SLAB FLOORING. (APSS NO: 402).
24
-
3580
... More
RE-FILLING WITH EXCAVATED EARTH IN LAYERS NOT EXCEEDING 15 CM THICK, CONSOLIDATING EACH DEPOSITED LAYER BY WATERING AND RAMMING INCLUDING COST AND CONVEYANCE OF WATER TO WORK SITE AND ALL INCIDENTAL, OPERATIONAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. IN TRENCHES, SIDES OF FOUNDATIONS AND BASEMENT. (APSS NO. 309 & 310)
80
-
42
... More
FILLING WITH CARTED GRAVEL OBTAINED FROM APPROVED QUARRY IN LAYERS NOT EXCEEDING 15 CM THICK, IN BASEMENTS, CONSOLIDATING EACH DEPOSITED LAYER BY WATERING AND RAMMING EXCLUDING SEIGNORAGE, INCLUDING COST AND CONVEYANCE OF WATER TO WORK SITE AND ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES, HIRE CHARGES OF T & P ETC., COMPLETE FOR FINISHED ITEM OF WORK. (APSS NO. 309 & 310)
40
-
591.9
... More
FILLING WITH STONE CRUSHER DUST FINER THAN 3 MM WITH NOT MORE THAN10% PASSING THROUGH 0.075 SIEVE IN LAYERS NOT EXCEEDING 15 CM THICK, IN FOUNDATIONS & BASEMENTS, CONSOLIDATING EACH DEPOSITED LAYER BY WATERING AND RAMMING EXCLUDING SEIGNORAGE, INCLUDING COST AND CONVEYANCE OF WATER TO WORK SITE AND ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES, HIRE CHARGES OF T & P ETC., COMPLETE FOR FINISHED ITEM OF WORK. (APSS NO. 309 & 310)
40
-
948.9
... More
MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM EXCLUDING SEINIORAGE CHARGES, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING AND CURING ETC., CPOMPLETE FOR FINISHED ITEM OF WORK. SUPERSTRUCTURE WALLS 225 MM THICK GROUND FLOOR (APSS NO. 501&504).
40
-
6606
... More
MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM EXCLUDING SEINIORAGE CHARGES, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING AND CURING ETC., CPOMPLETE FOR FINISHED ITEM OF WORK. SUPERSTRUCTURE WALLS 225 MM THICK FIRST FLOOR (APSS NO. 501&504).
40
-
6871.5
... More
MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM EXCLUDING SEINIORAGE CHARGES, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING AND CURING ETC., CPOMPLETE FOR FINISHED ITEM OF WORK. SUPERSTRUCTURE WALLS 225 MM THICK SECOND FLOOR (APSS NO. 501&504).
10
-
7372
... More
MASONRY WORK IN CM (1:4) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 100 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM EXCLUDING SEINIORAGE CHARGES, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING AND CURING ETC., CPOMPLETE FOR FINISHED ITEM OF WORK. PARTITION AND PARAPET WALLS 100 MM THICK GROUND FLOOR (APSS NO. 501&504).
2
-
7345.9
... More
MASONRY WORK IN CM (1:4) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 100 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM EXCLUDING SEINIORAGE CHARGES, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING AND CURING ETC., CPOMPLETE FOR FINISHED ITEM OF WORK. PARTITION AND PARAPET WALLS 100 MM THICK FIRST FLOOR (APSS NO. 501&504).
2
-
7611.4
... More
PLAIN CEMENT CONCRETE (1:3:6) PROP. USING 20MM GRADED HARD GRANITE MACHINE CRUSHED METAL EXCLUDING SEIGNIORAGE, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, MACHINE MIXING, LAYING, CURING, FINISHING, ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. BED BLOCKS IN GROUND FLOOR (APSS NO: 402).
4
-
4909
... More
PLAIN CEMENT CONCRETE (1:3:6) PROP. USING 20MM GRADED HARD GRANITE MACHINE CRUSHED METAL EXCLUDING SEIGNIORAGE, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE,CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, MACHINE MIXING, LAYING, CURING, FINISHING, ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. BED BLOCKS IN FIRST FLOOR (APSS NO: 402).
4
-
5001.9
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-30 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY EXCLUDING SEIGNIORAGE CHARGES, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), WATER ETC., TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FOOTINGS. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 400 Kgs FOR M-30 GRADE CONCRETE)
2
-
9328.29
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-30 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY EXCLUDING SEIGNIORAGE CHARGES, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), WATER ETC., TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR PEDESTALS. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 400 Kgs FOR M-30 GRADE CONCRETE)
50
-
9946.7
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-30 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY EXCLUDING SEIGNIORAGE CHARGES, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), WATER ETC., TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR 150 MM THICK CURTAIN WALL IN GROUND FLOOR. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 400 Kgs FOR M-30 GRADE CONCRETE)
4
-
15729.1
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-30 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY EXCLUDING SEIGNIORAGE CHARGES, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), WATER ETC., TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR PLINTH BEAMS.
(ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 400 Kgs FOR M-30 GRADE CONCRETE)
8
-
11911.1
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-30 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY EXCLUDING SEIGNIORAGE CHARGES, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), WATER ETC., TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR COLUMNS. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 400 Kgs FOR M-30 GRADE CONCRETE)
6
-
12496.1
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-30 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY EXCLUDING SEIGNIORAGE CHARGES, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), WATER ETC., TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FIRST FLOOR COLUMNS. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 400 Kgs FOR M-30 GRADE CONCRETE)
6
-
12864.6
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-30 GRADECORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY EXCLUDING SEIGNIORAGE CHARGES, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), WATER ETC., TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR BEAMS. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 400 Kgs FOR M-30 GRADE CONCRETE)
6
-
11044.7
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-30 GRADECORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY EXCLUDING SEIGNIORAGE CHARGES,INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), WATER ETC., TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FIRST FLOOR BEAMS. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 400 Kgs FOR M-30 GRADE CONCRETE)
6
-
11248.2
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-30 GRADECORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY EXCLUDING SEIGNIORAGE CHARGES, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), WATER ETC., TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR SECOND FLOOR BEAMS. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 400 Kgs FOR M-30 GRADE CONCRETE)
2
-
11744.2
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-30 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY EXCLUDING SEIGNIORAGE CHARGES,INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), WATER ETC., TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR SLABS OF 125 MM THICK. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 400 Kgs FOR M-30 GRADE CONCRETE)
20
-
10090.4
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-30 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY EXCLUDING SEIGNIORAGE CHARGES,INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), WATER ETC., TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FIRST FLOOR SLABS OF 125 MM THICK. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 400 Kgs FOR M-30 GRADE CONCRETE)
20
-
10293.8
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-30 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY EXCLUDING SEIGNIORAGE CHARGES, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), WATER ETC., TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR SECOND FLOOR SLABS OF 125 MM THICK. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 400 Kgs FOR M-30 GRADE CONCRETE)
2
-
10953.1
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-30 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY EXCLUDING SEIGNIORAGE CHARGES, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), WATER ETC., TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR SLABS OF 175 MM THICK. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 400 Kgs FOR M-30 GRADE CONCRETE)
3
-
9301.6
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-30 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY EXCLUDING SEIGNIORAGE CHARGES, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), WATER ETC., TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FIRST FLOOR SLABS OF 175 MM THICK. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 400 Kgs FOR M-30 GRADE CONCRETE)
3
-
9505.1
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-30 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY EXCLUDING SEIGNIORAGE CHARGES,INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), WATER ETC., TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR SECOND FLOOR TERRACE TANK SIDE WALLS 150 MM THICK. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 400 Kgs FOR M-30 GRADE CONCRETE)
2
-
16683.2
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-30 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY EXCLUDING SEIGNIORAGE CHARGES,INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), WATER ETC., TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, INCLUDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC.,, SHUTTERING, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR FLOORING. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 400 Kgs FOR M-30 GRADE CONCRETE)
10
-
8039.8
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-30 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY EXCLUDING SEIGNIORAGE CHARGES,INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), WATER ETC., TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR GROUND FLOOR LINTELS. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 400 Kgs FOR M-30 GRADE CONCRETE)
2
-
8225.7
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-30 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY EXCLUDING SEIGNIORAGE CHARGES, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), WATER ETC., TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. (APSS NO. 402) FOR FIRST FLOOR LINTELS. (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 400 Kgs FOR M-30 GRADE CONCRETE)
2
-
8594.2
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-30 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY EXCLUDING SEIGNIORAGE CHARGES, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), WATER ETC., TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. SUNSHADES OF 50MM (2") AVERAGE THICK INCLUDING DRIP COURSE OF SIZE 40MM WIDE X 20MM HEIGHT IN CEMENT MORTAR (1:4) PROP - GROUND FLOOR (APSS NO.403) (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 400 Kgs FOR M-30 GRADE CONCRETE)
4
-
1093.9
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-30 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY EXCLUDING SEIGNIORAGE CHARGES, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), WATER ETC., TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. SUNSHADES OF 50MM (2") AVERAGE THICK INCLUDING DRIP COURSE OF SIZE 40MM WIDE X 20MM HEIGHT IN CEMENT MORTAR (1:4) PROP - FIRST FLOOR (APSS NO.403) (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 400 Kgs FOR M-30 GRADE CONCRETE)
4
-
1112.3
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY EXCLUDING SEIGNIORAGE CHARGES, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), WATER ETC., TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. LOFTS OF 50 MM THICK - GROUND FLOOR (APSS NO.403) (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
10
-
1037.8
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY EXCLUDING SEIGNIORAGE CHARGES, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), WATER ETC., TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. LOFTS OF 50 MM THICK - FIRST FLOOR (APSS NO.403) (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
10
-
1008.5
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY EXCLUDING SEIGNIORAGE CHARGES, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), WATER ETC., TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. RACKS 25 MM THICK - GROUND FLOOR. (APSS NO.403) (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
40
-
244
... More
SUPPLY AND PLACING OF THE DESIGN MIX CONCRETE OF M-25 GRADE CORRESPONDING TO IS 456 USING WEIGH BATCHER/MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY EXCLUDING SEIGNIORAGE CHARGES, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), WATER ETC., TO SITE, ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, CURING ETC., COMPLETE WITH MINIMUM CEMENT CONTENT AS PER IS CODE, ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. RACKS 25 MM THICK - FIRST FLOOR. (APSS NO.403) (ESTIMATE PURPOSE QTY. OF CEMENT TAKEN AS 380 Kgs FOR M-25 GRADE CONCRETE)
40
-
255
... More
ORNAMENTAL PLASTERING TO CEILING 12MM THICK WITH A BASE COAT OF 8 MM THICK IN CM (1:5) PROP. AND FINISH COAT OF 4MM THICK IN CM (1:3) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. GROUND FLOOR (APSS NO: 901 & 904)
160
-
344.8
... More
ORNAMENTAL PLASTERING TO CEILING 12MM THICK WITH A BASE COAT OF 8 MM THICK IN CM (1:5) PROP. AND FINISH COAT OF 4MM THICK IN CM (1:3) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. FIRST FLOOR (APSS NO: 901 & 904)
140
-
372.4
... More
ORNAMENTAL PLASTERING TO CEILING 12MM THICK WITH A BASE COAT OF 8 MM THICK IN CM (1:5) PROP. AND FINISH COAT OF 4MM THICK IN CM (1:3) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. SECOND FLOOR (APSS NO: 901 & 904)
10
-
410.3
... More
PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK. GROUND FLOOR (APSS NO: 901&904)
400
-
326.6
... More
PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK.FIRST FLOOR (APSS NO: 901&904)
400
-
354.2
... More
PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK.SECOND FLOOR (APSS NO: 901&904)
300
-
387.1
... More
PROVIDING "HYSD" STEEL BARS OF DIFFERENT DIAMETERS BELOW 36MM DIAMETER (Fe - 500 GRADE AS PER IS 1786 - 1979)FOR REINFORCEMENT INCLUDING CUTTING, BENDING TO REQUIRED SIZES AND SHAPES, PLACING THEM IN POSITION WITH COVER BLOCKS OF APPROVED SHAPE AND SIZE, TYING FIRMLY WITH M.S BINDING WIRE OF SWG, FORMING GRILLS FOR REINFORCEMENT WORKS AS PER APPROVED DESIGNS AND DRAWINGS TO BE SUPPLIED AT THE TIME OF EXECUTION OF WORK INCLUDING COST AND CONVEYANCE OF DEFORMED BARS, BINDING WIRE, COVER BLOCKS AND ALL WASTAGES SUCH AS OVER LAPS, COUPLINGS, WELDED JOINTS, CHAIRS, SPACE BARS ETC., AS DIRECTED BY THE ENGINEER-IN-CHARGE AND ALL OPERATIONAL, INCIDENTAL LABOUR CHARGES SUCH AS CUTTING, BENDING, PLACING IN POSITION, TYING ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR ALL LENGTHS AS PER DRAWINGS AND TECHNICAL SPECIFICATIONS FOR BARS BELOW 36MM DIA WHERE THEY ARE NOT WELDED.
18
-
65414.8
... More
PROVIDING IMPERVIOUS COAT TO EXPOSED RCC ROOF SLAB SURFACE IN CM(1:3), 20MM THICK WITH 1KG OF WATER PROOF COMPOUND PER BAG OF CEMENT LAID OVER ROOF WHEN IT IS GREEN, EXCLUDING SEIGNIORAGE CHARGES, INCLUDING COST OF ALL MATERIALS, COST & CONVEYANCE OF ALL MATERIALS, INCIDENTAL, OERATIONAL AND LABOUR CHARGES FOR MIXING MORTAR, LAYING, RENDERING SMOOTH AND THREAD LINING, CURING, ROUNDING OFF JUNCTIONS OF WALL AND SLAB ETC,, COMPLETE FOR FINISHED ITEM OF WORK. GROUND FLOOR (APSS.NO: 901&903)
20
-
363.6
... More
PROVIDING IMPERVIOUS COAT TO EXPOSED RCC ROOF SLAB SURFACE IN CM(1:3), 20MM THICK WITH 1KG OF WATER PROOF COMPOUND PER BAG OF CEMENT LAID OVER ROOF WHEN IT IS GREEN, EXCLUDING SEIGNIORAGE CHARGES,INCLUDING COST OF ALL MATERIALS, COST & CONVEYANCE OF ALL MATERIALS, INCIDENTAL, OERATIONAL AND LABOUR CHARGES FOR MIXING MORTAR, LAYING, RENDERING SMOOTH AND THREAD LINING, CURING, ROUNDING OFF JUNCTIONS OF WALL AND SLAB ETC,, COMPLETE FOR FINISHED ITEM OF WORK. FIRST FLOOR (APSS.NO: 901&903)
140
-
391.3
... More
DADOOING AND FLOORING IN TOILETS WITH GLAZED FULL BODY PORCELAIN PREMIUM PLAIN DESIGN HIGHLIGHTER COMBINATION FLOOR AND WALL TILES SET WITH FLOOR TILES OF THICKNESS 14-16 MM AND WALL TILES OF THICKNESS 8-10 MM BUT INCLUDING HIGHLIGHTERS 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, AS DIRECTED BY THE ENGINEER-IN-CHARGE, SET OVER BASE COAT OF CM (1:3) 12 MM THICK WITH CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD AT THE RATE OF 3.30 KGS PER SQM AND JOINTED WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS, EXCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK. GROUND FLOOR.
8
-
1183.6
... More
DADOOING AND FLOORING IN TOILETS WITH GLAZED FULL BODY PORCELAIN PREMIUM PLAIN DESIGN HIGHLIGHTER COMBINATION FLOOR AND WALL TILES SET WITH FLOOR TILES OF THICKNESS 14-16 MM AND WALL TILES OF THICKNESS 8-10 MM BUT INCLUDING HIGHLIGHTERS 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, AS DIRECTED BY THE ENGINEER-IN-CHARGE, SET OVER BASE COAT OF CM (1:3) 12 MM THICK WITH CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD AT THE RATE OF 3.30 KGS PER SQM AND JOINTED WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS, EXCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK. FIRST FLOOR.
40
-
1194.2
... More
FLOORING WITH DOUBLE CHARGED / MULTI CHARGED STAIN FREE FULL BODY PORCELAIN VITRIFIED TILES WITH DOUBLE LAYER PIGMENT OF SIZE 600 X 600 MM AND THICKNESS BETWEEN 8-10 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS AS DIRECTED BY THE ENGINEER-IN-CHARGE, SET OVER BASE COAT OF CEMENT MORTAR (1:8), 12 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE TO FULL DEPTH MIXED WITH PIGMENT OF MATCHING SHADE, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILES ETC., COMPLETE, EXCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK - GROUND FLOOR.
40
-
1222.2
... More
FLOORING WITH DOUBLE CHARGED / MULTI CHARGED STAIN FREE FULL BODY PORCELAIN VITRIFIED TILES WITH DOUBLE LAYER PIGMENT OF SIZE 600 X 600 MM AND THICKNESS BETWEEN 8-10 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS AS DIRECTED BY THE ENGINEER-IN-CHARGE, SET OVER BASE COAT OF CEMENT MORTAR (1:8), 12 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE TO FULL DEPTH MIXED WITH PIGMENT OF MATCHING SHADE, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILES ETC., COMPLETE, EXCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK - FIRST FLOOR.
120
-
1264.7
... More
PROVIDING SKIRTING TO INTERNAL WALLS WITH DOUBLE CHARGED / MULTI CHARGED STAIN FREE FULL BODY PORCELAIN VITRIFIED TILES WITH DOUBLE LAYER PIGMENT OF SIZE 1000 X 1000 MM AND THICKNESS BETWEEN 9-11 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS AS DIRECTED BY THE ENGINEER-IN-CHARGE IN LENGTH EQUAL TO FLOORING STONES, SET OVER BASE COAT OF CM (1:5) 12 MM THICK WITH CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD AT THE RATE OF 3.30 KGS PER SQM AND JOINTED WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE TILES, CEMENT, SAND AND WATER ETC., COMPLETE EXCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK - GROUND FLOOR.
4
-
1229
... More
PROVIDING SKIRTING TO INTERNAL WALLS WITH DOUBLE CHARGED / MULTI CHARGED STAIN FREE FULL BODY PORCELAIN VITRIFIED TILES WITH DOUBLE LAYER PIGMENT OF SIZE 1000 X 1000 MM AND THICKNESS BETWEEN 9-11 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS AS DIRECTED BY THE ENGINEER-IN-CHARGE IN LENGTH EQUAL TO FLOORING STONES, SET OVER BASE COAT OF CM (1:5) 12 MM THICK WITH CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD AT THE RATE OF 3.30 KGS PER SQM AND JOINTED WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE TILES, CEMENT, SAND AND WATER ETC., COMPLETE EXCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK - FIRST FLOOR.
16
-
1271.6
... More
FLOORING WITH HIGH POLISHED GRANITE 18 MM THICK SLABS BLACK SET OVER BASE COAT OF CEMENT MORTAR (1:8), 20 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, EXCLUDING SEIGNIORAGE CHARGES, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILESETC., COMPLETE, LABOUR CHARGES FOR DRESSING OF TILESETC., COMPLETE FOR FINISHED ITEM OF WORK, BUT EXCLUDING THE COST OF CONVEYANCE OF ALL MATERIALS. FOR STEPS IN GROUND FLOOR.
20
-
3091.4
... More
FLOORING WITH HIGH POLISHED GRANITE 18 MM THICK SLABS BLACK SET OVER BASE COAT OF CEMENT MORTAR (1:8), 20 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, EXCLUDING SEIGNIORAGE CHARGES, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILESETC., COMPLETE, LABOUR CHARGES FOR DRESSING OF TILESETC., COMPLETE FOR FINISHED ITEM OF WORK, BUT EXCLUDING THE COST OF CONVEYANCE OF ALL MATERIALS. FOR STEPS IN FIRST FLOOR.
20
-
3169.4
... More
GRONOLITHIE CONCRETE FLOORING 20 MM THICK WITH (1:1:2), USING 6MM TO 12 MM SIZE HARD GRANITE MACHINE CRUSHED METAL LAID OVER CC BED ALREADY LAID OR RCC ROOF SLAB, IN ALTERNATE PANELS OF SIZE NOT EXCEEDING 1.50 M X 1.50 M AND FINISHING THE TOP SURFACE TO REQUIRED SMOOTHNESS AND SLOPES AND THREAD LINING EXCLUDING SEIGNIORAGE CHARGES,INCLUDING COST OF ALL MATERIALS LIKE CEMENT, METAL, SAND AND WATER ETC., COMPLETE, ETC., COMPLETE FOR FINISHED ITEM OF WORK,
20
-
357.8
... More
HALF ROUNDING THE EDGES OF GRANITE SLAB AS DIRECTED BY THE ENGINEER-IN-CHARGE, INCLUDING POLISHING, ALL LABOUR CHARGES, HIRE CHARGES OF TOOLS AND PLANTS, INCIDENTAL & OPERATIONAL CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
60
-
433.8
... More
DOUBLE LINE DRESSING OF GRANITE SLAB AS DIRECTED BY THE ENGINEER-IN-CHARGE, INCLUDING POLISHING, ALL LABOUR CHARGES, HIRE CHARGES OF TOOLS AND PLANTS, INCIDENTAL & OPERATIONAL CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
30
-
325.3
... More
PROVIDING AND APPLYING SYNTHETIC PLASTER PUTTY OR EQUIVALENT PUTTY SUCH AS BIRLA WALL CARE PUTTY OF AVERAGE 1 TO 2 MM THICK OVER PLASTERED SURFACE TO PREPARE THE SURFACE EVEN AND SMOOTH AFTER THOROUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, APPLYING EMERY PAPER, SAND THE SURFACE, CLEAN & WIPE OFF LOOSE DUST, APPLYING, KNIFING PASTE FILLER BY PUTTY KNIFE / MUSLIN PAD, AIR DRY FOR 2-3 HRS., SAND WITH 180 AND 320 NO. EMERY PAPER FOR THE SURFACE PREPARATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK - INTERNAL WALLS.
40
-
196.4
... More
PAINTING TO NEW WALLS WITH 2 COATS OF PLASTIC EMULSION PAINT OF APPROVED BRAND AND SHADE AFTER THOROUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO WORK SITE AND ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR INTERNAL WALLS. (APSS NO. 911).
800
-
124.2
... More
PROVIDING AND APPLYING GOLD LINE EXTERIOR TEXTURE OF AVERAGE 2 TO 3 MM THICK OVER PLASTERED SURFACE, EVEN AND SMOOTH AFTER THOROUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, APPLYING EMERY PAPER, SAND THE SURFACE, CLEAN & WIPEOFF LOOSE DUST, APPLYING TEXTUE PAINT FILLER BY PUTTY KNIFE / MUSLIN PAD, AIR DRY FOR 2-3 HOURS FOR THE SUFACE PREPARATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO WORK SITE AND ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR EXTERNAL WALLS OF ALL FLOORS.
20
-
401.8
... More
PAINTING TO EXTERIOR FACES OF WALLS WITH EMULSION PAINT OF APPROVED MAKE (ACE FROM ASIAN PAINT) AND COLOUR 2 COATS BY DILUTING 1LIT OF EMULSION PAINT WITH A MAXIMUM 750 ML OF WATER WITHIN AN INTERVAL OF NOT LESS THAN 6 HOURS BETWEEN TWO COATS OVER 1 COAT OF ASIAN EXTERIOR WALL PRIMER BY DILUTING 1LIT. OF PRIMER WITH 1LIT. OF WATER (TOTAL 3 COATS) WITH SURFACE PREPARATION ETC., AS PER STANDARD SPECIFICATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, BRUSHES, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES, CURING, SCAFFOLDING ETC., COMPLETE FOR FINISHED ITEM OF WORK. ALL FLOORS (APSS NO:908)
400
-
220
... More
PAINTING TO NEW WOOD WORK TWO COATS WITH SYNTHETIC ENAMEL PAINT OF APPROVED BRAND AND SHADE OVER ONE COAT OF WOOD PRIMER COAT (TOTAL 3 COATS) INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES FOR PREPARING AND CLEANING THE SURFACE OF DIRT WITH SOAP AND BRUSHES, INCLUDING PUTTY, ETC., COMPLETE FOR FINISHED ITEM OF WORK. (APSS NO.1201, 1207, 1212).
10
-
202.2
... More
PAINTING TO NEW IRON WORK TWO COATS WITH SYNTHETIC ENAMEL PAINT OF APPROVED BRAND AND SHADE OVER ONE COAT OF RED OXIDE PRIMER COAT (TOTAL 3 COATS) INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES FOR PREPARING AND CLEANING THE SURFACE OF DIRT WITH SOAP AND BRUSHES, INCLUDING PUTTY, ETC., COMPLETE FOR FINISHED ITEM OF WORK. (APSS NO.1201, 1207, 1212).
40
-
190.5
... More
SUPPLY AND FIXING MS GRILLS TO WINDOWS / VENTILATORS OF ALL SIZES INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR FABRICATION & FIXING AS DIRECTED BY THE ENGINEER-IN-CHARGE ETC., COMPLETE FOR FINISHED ITEM OF WORK. M.S SQUARE BARS OF ALL SIZES:
100
-
96.1
... More
SUPPLY AND FIXING MS GRILLS TO WINDOWS / VENTILATORS OF ALL SIZES INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR FABRICATION & FIXING AS DIRECTED BY THE ENGINEER-IN-CHARGE ETC., COMPLETE FOR FINISHED ITEM OF WORK. M.S FLATS OF ALL SIZES:
100
-
97.2
... More
PROVIDING ROOFING WITH 0.50 MM THICK GALVANIZED / PRE-PAINTED G.I PROFILED SHEETS FIXED TO THE PURLINS WITH 14 SIZE SELF DRILLING SCREWS WITH NEOPRENE WASHER. SIDE LAPS ARE STICHED WITH SELF TAPPING / DRILLING SCREWS. END LAPS ARE TO BE SEALED WITH 25 X 3 MM BUTYL TAPE. THE SHEETS ARE PROVIDED WITH ANTI CAPILLARY GROVE INCLUDING ALL INCIDENTAL & OPERATIONAL CHARGES COST AND CONVEYANCE OF ALL MATERIALS TO SITE ETC., COMPLETE FOR FINISHED ITEM OF WORK.
8
-
836
... More
PROVIDING AND FIXING STRUCTURAL GLAZING FABRICATED FROM ROLL FORMED SECTIONS MADE OF PRE-PAINTED STEEL / POWDER COATED (BASE STEEL AS PER IS 513 OF ‘D’ QUALITY, GALVANIZED AS PER IS 277 WITH ZINC OF 120 GM/SQM) WITH TOTAL COATED THICKNESS OF 0.72 MM AND THE GLASS HOLDING SECTION MADE OF 304 GRADE STAINLESS STEEL OF 0.58 MM THICK GALVANISED STEEL SECTION AS STIFFENERS INSIDE THE COLOUR COATED STEEL POWDER COATED SECTIONS AS PER THE DESIGN REQUIREMENT & CALCULATIONS TO SUIT WIND PRESSURES AS GIVEN IN IS: 875. THE PRIMER COAT WITH EPOXY PRIMER OF 5 – 7 MICRONS THICK, FINISH PAINTED WITH A POLYESTER PAINT OF 12-16 MICRONS THICK AND BACK COATED WITH ALKYD BACKER OF 5-7 MICRONS OR POWDER COATED WITH PURE POLYESTER POWDER UP TO 50-60 MICRONS THICK AND THE VERTICAL SECTION OF 50X99X0.72MM, 33X56X0.72MM FOR FRAME HORIZONTAL SECTION, STIFFENER SECTION OF 47X 7 X1MM, COVER PROFILES SECTIONS OF 20X58X0.58MM, GLASS HOLDING SECTION OF 37X37 & 37X18 MM INCLUDING FIXING 5MM THICK OCEAN BLUE REFLECTIVE GLASS, BRACKETS MADE OF CRCA POWDER COATED / ELECTROPLATED TO CONNECT VERTICAL TO HORIZONTAL, VERTICAL TO SLAB, TO FIX VERTICALS AT TOP & BOTTOM AS PER SITE REQUIREMENT AND GASKET MADE OF ETHYL PROPYLENE DIAMINE MONOMER, U.V RESISTANT SILICON SEALANT INCLUDING FIXING IN CONCRETE / MASONRY WALL WITH SELF-EXPANDING CAP & SCREWS INCLUSIVE OF COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL LABOUR CHARGES, INCIDENTAL CHARGES, COST OF ALL CONSUMABLES ETC. AND FIXING CHARGES COMPLETE FOR FINISHED ITEM OF WORK
2
-
7287.5
... More
SUPPLYING AND FIXING ALUMINIUM COMPOSITE CLADDING WITH SKIN MATERIAL 0.50 MM THICK ALUMINIUM SHEET COVER MATERAL NATURAL POLYETHYLENE ALUMINIUM CLADDING PANEL FIXED WITH EXTRUDED ALUMINIUM BASIS FRAME (50 X 25 X 1.50 MM) ANGLE CLEATS, WEATHER SEALANTS, RIVETS, GI BRACKETS ALL AS APPROVED, USING SUITABLE BOLTS ON STRUCTURAL STEEL WORK INCLUDING NECESSARY ACCESSORIES COMPLETE IN ALL RESPECTS BUT EXCLUDING COST OF STRUCTURAL STEEL FABRICATION. IF ANY, ACP CLADDING - 4 MM THICK INCLUDING ALL SCAFFOLDING AND LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
4
-
2945.8
... More
SUPPLY AND FIXING OF STAINLESS STEEL RAILING USING STAINLESS STEEL TUBES, SECTIONS, PLATES, SHEETS, PIPES OF ALL SIZES & DIAMETERS OF 304 GRADE, INCLUDING FABRICATION AS PER APPROVED DESIGN USING STAINLESS STEEL WELDING RODS, BUFFING, POLISHING, LACQUER FINISHING, TO PRESENT SEAMLESS FINISH, ALL OTHER INCIDENTAL, OPERATIONAL CHRGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
40
-
568.3
... More
S & F OF UNPLASTICISED POLY VINYL CHLORIDE (UPVC) SLIDING WINDOWS THREE TRACK - TWO GLASS SHUTTERS SLIDING AND ONE MESH SHUTTER - 80-SERIES DULY MANUFACTURED USING UPVC REINFORCED PROFILES OF 80 MM X 52 MM X 2.25 MM FOR OUTER FRAMES, 54 MM X38 MM X 2.25 MM FOR SLIDING SHUTTER FRAMES CAPABLE OF MOUNTING SINGLE GLAZING SYSTEM STRUCTURALLY REINFORCED WITH HOT DIP GALVANIZED UP TO 50 MICRONS OF MINIMUM THICKNESS OF 1.2 MM PREFABRICATED & WELDED THROUGH FUSION WELDING. THE WINDOW SASH SHALL BE FITTED WITH 5 MM THICK CLEAR FLOAT GLASS OF REPUTED MAKE AND MESH SHUTTER FRAME SHALL BE 52 MM X 21.5 MM X 2 MM FITTED WITH NYLON/ POLYMER MESH ON ROLLERS/ PULLEY DULY FIXED WITH EPDM WEATHERING SEAL RESISTANT ACCESSORIES LIKE CLIPPING LOCKING SYSTEM MADE OF ALUMINIUM, 1 NO., PER SET OF SASHES AND THE SYSTEM IS TO BE INSTALLED AT THE SITE USING ANCHOR FASTENERS, SILICON RUBBER SEALANT, EASY GLAZING/ DEGLAZING AT SITE ETC., INCLUDING COST AND CONVEYANCEOF ALL MATERIALS, ACCESSORIES, LABOUR CHARGES FOR TRANSPORTATION,ERECTION AT SITE WITH TEMPLATES FOR CASEMENT SIZING COMPLETE FOR FINISHED ITEM OF WORK.
16
-
6594.5
... More
S & F OF FIXED LOUVERED VENTILATOR MADE OUT OF MULTI CHAMBERED UPVC SECTIONS WITH TPV GASKETS HAVING ISOLATED DRAINAGE AND REINFORCED WITH GALVANIZED IRON PROFILES THROUGHOUT THE WINDOW. THE OUTER FRAME HAVING AN OVERALL SIZE OF 60 X 55 MM WITH REINFORCEMENT OF 1 MM THICKNESS AND MULLION WITH OVERALL SIZE OF 74 X 60 MM WITH REINFORCEMENT OF 1 MM THICKNESS. VENTILATOR SHALL BE PROVIDED WITH 4.5 MM PIN HEAD GLASS, STANDARD HARDWARE. WALL THICKNESS OF FRAME & MULLION SHALL BE 2.0 MM, INCLUDING COST AND CONVEYANCEOF ALL MATERIALS, ACCESSORIES, LABOUR CHARGES FOR TRANSPORTATION,ERECTION AT SITE WITH TEMPLATES FOR CASEMENT SIZING COMPLETE FOR FINISHED ITEM OF WORK.
2
-
6004.9
... More
EXTERNAL DOOR (DOUBLE SHUTTER) 1.20 X 2.10 M: SUPPLYING POSITIONING AND FIXING OF ISI MARK, STANDARD MAKE FLUSH DOOR SHUTTER OF 35 MM THICK BOND WOOD SOLID BLOCK BOARD TYPE WITH COMMERCIAL PLY ON BOTH FACES, INCLUDING DOOR FRAME MADE WITH TEAK WOOD SCANTLINGS OF SIZE 150 MM X 100 MM, INCLUDING 6 NOS. OF MS 'Z' HOLD FASTS OF SIZE 230 X 40 X 3 MM, 8 NOS. OF 125 MM BUTT HINGES, 4 NOS. 150 MM LONG DOOR HANDLES, 2 NOS. ALDROP OF SIZE 300 MM LONG, 3 NOS. 250 MM LONG TOWER BOLTS, 2 NOS. DOOR STOPPERS WITH BOLTS, NUTS, NF SCREWS, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR MAKING THE FRAME, SHUTTER, MINOR EXTRA FIXTURES REQUIRED IF ANY AS DIRECTED BY THE ENGINEER-IN-CHRGE OF THE WORK COMPLETE FOR FINISHED ITEM OF WORK. (ALL FITTINGS AND FIXTURES SHOULD BE OF ALUMINIUM, ISI MARK, GOT APPROVED BY THE ENGINEER-IN-CHARGE). (APSS NO: 1001&1002).
6.32
-
6472.2
... More
INTERNAL DOORS: S & F OF PVC DOOR FRAME WITH ABS SHUTTER MADE WITH (A) FACTORY MADE PRE-LAMINATED FPVC (FOAMED POLYVINYL CHLORIDE) DOOR FRAME OF THE SIZE 105X40MM WITH A WALL THICKNESS OF 10MM MADE OUT OF EXTRUDED RIGID FPVC PROFILE MITRE JOINED WITH 6 NOS. OF 50MM LONG SCREW. THE DOOR FRAME SHALL BE FIXED TO THE WALL BY USING 80MM LONG SCREWS THROUGH THE FRAME WITH THE HELP OF PVC FASTENERS OF 3 NO'S TO BE PROVIDED FOR EACH VERTICAL MEMBER, GI STIFFENERS OF ("U" CHANNEL OF SIZE 29X9X1MM, 150MM LONG) -3 NO'S AT HINGE POINT, FRAME REINFORCEMENT OF("U" GI CHANNEL OF SIZE 46X22X.06MM), BOTTOM TIE ROD OF ("U" GI CHANNEL SIZE OF 15X15X1MM) ETC., COMPLETE AS PER MANUFACTURERS SPECIFICATION FOR FINISHED ITEM OF WORK. MAXIMUM DOOR FRAME SIZE: 980 X 2070 (B) 35MM THICK FACTORY MADE PRE-LAMINATED ABS (ACROLYNITRILE BUTADYNE STYRENE) DOOR SHUTTER MOULDED IN DIFFERENT DESIGNS, CONSISTING OF ALL ROUND FRAME MADE OUT OF WATER PROOF SOLID FOAM PVC BAR OF SIZE 20X32MM, REINFORCED BY 32X 32MM - 2 NOS. FOR VERTICAL MADE OUT OF LVL (LAMINATED VENEER LUMBER), CORE MATERIAL OF 32 MM THICK HIGH DENSITY CRAFT PAPER HONEY COMB BOARD, SANDWICHED ON BOTH SIDES WITH PRE-LAMINATED ABS SHEET THICKNESS OF 1.5MM . PVC EDGE BANDING OF SIZE 0.45MM ON THE VERTICAL SIDES. HARDWARE MADE OUT OF STEEL COATED BUTTERFLY HINGES - 3 NOS. FOR EACH SHUTTER AND GODREJ MAKE ROUND MORTISE LOCK ETC., COMPLETES FOR FINISHED ITEM OF WORK. MAXIMUM SHUTTER SIZE OF: 910 X 2030 MM. AS DIRECTED BY THE ENGINEER-IN-CHARGE.
18
-
14864.3
... More
SUPPLYING AND LAYING RAIN WATER DOWN TAKE PIPES WITH 110 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND JOINTED WITH SOLVENT CEMENT INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
40
-
280.3
... More
COVEYANCE OF EXCAVATED EARTH FROM PILES WHICH NOT USEFUL FOR REFILLING IN BUILDING TO A LEAD OF 10 KM INCLUDING THE COST OF LOADING , COST AND CONVEYANCE OF ALL MATERIALS AND LABOUR CHARGES ETC COMPLETE FOR FINISHED ITEM OF WORK.
80
-
135.9
... More
DISMANTLING UNREINFORCED CEMENT CONCRETE MORE THAN 15CM THICK WHICH NOT USEFUL INCLUDING THE COST AND CONVEYANCE OF ALL MATERIALS AND LABOUR CHARGES ETC COMPLETE FOR FINISHED ITEM OF WORK.
8
-
3006.1
... More
PROVIDING AND FIXING FACTORY MADE POLYVINYL CHLORIDE (PVC) DOOR FRAME OF THE SIZE 50 X 47MM WITH A WALL THICKNESS OF 5MM, MADE OUT OF EXTRUDED 10 MM RIGID PVC FOAM SHEET, MITRE CUT AT TWO CORNERS AND JOINED WITH 2NOS. OF 150MM LONG BRACKETS OF 15X15MM M.S. SQUARE TUBE. THE TWO VERTICAL DOOR PROFILES ARE TO BE REINFORCED WITH 19X19MM M.S. SQUARE TUBE OF 19 GAUGE. THE DOOR FRAME SHALL BE FIXED TO THE WALL USING 65/100MM LONG M.S. SCREWS THROUGH THE FRAME BY USING PVC FASTENERS. A MINIMUM OF 4NOS. OF SCREWS TO BE PROVIDED FOR EACH VERTICAL MEMBER & MINIMUM 2NOS. FOR HORIZONTAL MEMBER ETC. COMPLETE AS PER MANUFACTURERS SPECIFICATION AND DIRECTION OF ENGINEER-IN-CHARGE FOR FINISHED ITEM OF WORK.
20
-
333.3
... More
PROVIDING AND FIXING 30MM THICK SOLID PANEL PVC DOOR SHUTTER CONSISTING OF FRAME MADE OUT OF M.S. TUBES OF 19 GAUGE THICKNESS AND SIZE OF 19MM X 19MM FOR STILES & 15MM X 15MM FOR TOP & BOTTOM RAILS. M.S. FRAME SHALL HAVE A COAT OF STEEL PRIMERS OF APPROVED MAKE AND MANUFACTURE. M.S. FRAME SHALL BE COVERED WITH 5MM THICK HEAT MOULDED PVC ‘C’ CHANNEL OF SIZE 30 X 50MM FORMING STILES, AND 5MM THICK, 75MM WIDE PVC SHEETS FOR TOP RAIL, LOCK RAIL & BOTTOM RAIL ON EITHER SIDE, AND 10MM (5MM X 2) THICK, 20MM WIDE CROSS PVC SHEET AS GAP INSERT FOR TOP RAIL & BOTTOM RAIL. PANELLING OF 5MM THICK PVC SHEET TO BE FITTED IN THE M.S. FRAME WELDED / SEALED TO THE STILES & RAILS WITH 30MM WIDE X 5MM THICK PVC SHEET BEADING ON EITHER SIDE, AND JOINED TOGETHER WITH SOLVENT CEMENT ADHESIVE ETC. AN ADDITIONAL 5MM THICK PVC STRIP OF 20MM WIDTH IS TO BE STUCK ON THE INTERIOR SIDE OF THE ‘C’ CHANNEL USING PVC SOLVENT ADHESIVE INCLUDING 3 NOS. 125 MM BUT HINGES, 2 NOS. 150 MM LONG TOWER BOLTS, 1 NO. 200 MM LONG ALDROP, 2 NOS. 150 MM LONG HANDLES (ALL FITTINGS SHOULD BE ALLUMINUM MAKE) ETC., COMPLETE AS PER DIRECTION OF ENGINEER-IN-CHARGE, MANUFACTURER’S SPECIFICATION & DRAWING FOR FINISHED ITEM OF WORK.
8
-
3469.4
... More
SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 15.90 MM OD PIPES SDR 13.5
20
-
58.3
... More
SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 22.20 MM OD PIPES SDR 13.5
60
-
93.5
... More
SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 28.60 MM OD PIPES SDR 13.5
60
-
135.3
... More
SUPPLYING AND FIXING 15 MM DIA BIB TAP WITH FLANGE CHROMIUM PLATED JAQUAR MAKE QUEEN SERIES INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
4
-
1631.3
... More
SUPPLYING AND FIXING JAQUAR MAKE AUTO CLOSING SYSTEM PILLAR COCK FOR WASH BASIN CHROME PALATED INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
4
-
2282.5
... More
SUPPLYING AND FIXING ANGULAR STOP COKS WITH WALL FLANGE CHROMIUM PLATED JAQUAR MAKE QUEEN SERIES INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
8
-
1690.7
... More
SUPPLYING AND FIXING WALL MIXER WITH PROVISION FOR OVER HEAD SHOWER AND 115 MM LONG BEND PIPE WITH WALL FLANGE CHROMIUM PLATED JAQUAR MAKE QUEEN SERIES INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
2
-
5222.8
... More
SUPPLYING AND FIXING OF BIBCOCK CUM HEALTH FAUCET WITH 1 M LONG TUBE AND WALL HOOK WITH WALL FLANGE CHROMIUM PLATED JAQUAR MAKE CONTINENTAL SERIES INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
4
-
3045.9
... More
SUPPLYING AND FIXING OF TOWEL COAT HOOK CHROMIUM PLATED JAQUAR MAKE QUEEN SERIES INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
4
-
895.4
... More
SUPPLYING AND FIXING 20 MM NB SIZE GM GATE(PEET) VALVE AS PER IS - 778, CLASS-I, INDIAN MAKE HEAVY TYPE, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
4
-
825.7
... More
SUPPLYING AND FIXING 25 MM NB SIZE GM GATE(PEET) VALVE AS PER IS - 778, CLASS-I, INDIAN MAKE HEAVY TYPE, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
4
-
1175.5
... More
SUPPLYING AND FIXING 76.2 MM (3") DIA UV RESISTANT UPVC SWR NAHANI TRAP WITH JALI OF APPROVED ISI BRAND INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
-
94.6
... More
SUPPLYING AND FIXING OF 150MMX100MM SWG GULLY TRAP CONFIRMING TO ISI 651 & 4127 WITH CI GRATING AND CONSTRUCTION OF BRICK MASONRY INTERMEDIATE CHAMBER OF SIZE 20"X14"X12" IN CM (1:6) OVER CC (1:5:10) PROP. BED OF SIZE 20"X14"X4" AND PLASTERING WITH 12MM THICK IN CM (1:4) PROP. BOTH INSIDE AND OUTSIDE SURFACES AND FITTED WITH 9"X12" (230X305MM) RCC (1:11/2:3) 1 1/2" THICK COVER INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., FOR FINISHED ITEM OF WORK COMPLETE.
2
-
435.7
... More
SUPPLYING, LAYING, JOINTING AND TESTING OF SINGLE SOCKET 110 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING EXCAVATION OF TRENCHES AND SOCKET PITS IN ANY SOIL (EXCEPT ROCK REQUIRING BLASTING) UP TO 0.91M DEPTH AND REFILLING WITH EXCAVATED SOILS, WATERING, TAMPING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
40
-
435.8
... More
SUPPLYING AND LAYING 110 MM DIA SINGLE SOCKET PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND JOINTED WITH SOLVENT CEMENT INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
40
-
280.3
... More
SUPPLYING AND LAYING 75 MM DIA SINGLE SOCKET PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS, PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
40
-
206.9
... More
CONSTRUCTING 457.20 X 457.20 MM (1'-6" X 1'-6") BRICK MASONARY INSPECTION CHAMBER WITH CM (1:6) PROP. USING 2ND CLASS CLAY BRICKS OF 225MM THICK , AND FITTED WITH 457.2 X 457.2 MM (1'-6" X 1'-6") RCC COVER UP TO A DEPTH OF 914.4 MM (3'-0") AND LAYING CEMENT CONCRETE (1:4:8) 150 MM THICK USING 40 MM HBG METAL AND PCC (1:2:4) BENCHING AND CHANNEL 100 MM THICK AS PER STANDARD SPECIFICATION FOR FINISHED ITEM OF WORK.
6
-
3418.8
... More
SUPPLYING AND FIXING INDIAN MAKE FLAT BACK WHITE GLAZED WASH HAND BASIN (HSW/PARRYWARE/NEYCER) IST QUALITY CONFIRMING TO IS: 2556-PART-4 :1972 OF SIZE 550 X 400MM SINGLE C.P. PILLAR COCK AS APPROVED BY EXECUTIVE ENGINEER WITH WASTE FITTINGS LIKE RUBBER PLUG, CHAIN, 32MM NOMINAL SIZE C.P. FITTING WITH PARALLEL PIPE THREAD CONFIRMING TO IS : 2963-1979 AND FITTED WITH 15MM NOMINAL BORE CHROMIUM PLATED PILLAR TAP OF 1ST QUALITY INDIAN MAKE 400GRAMS SEICO/SENIOR/NICE/ESSO OR EQUIVALENT COMPLETE WITH STANDARD CI BRACKETS, AND PAINTING TO ALL IRON FITTINGS WITH 2 COATS OF SYNTHETIC ENAMEL PAINT OF APPROVED COLOUR AND MAKE INCLUDING CUTTING THE WALLS WHEREVER NECESSARY AND MAKING THE SAME GOOD FOR FINISHED ITEM OF WORK. INCLUDING WOODEN BLOCK INCLUDING CUTTING THE WALLS WHEREVER NECESSARY AND MAKING THE SAME GOOD FOR FINISHED ITEM OF WORK.
4
-
1863
... More
SUPPLY AND FIXING IN POSITION 584.2MM LONG ORISSA PAN WITH 100 MM 'P' OR 'S' TRAP INCLUDING PROVIDING BRICK MASONARY SEAT USING 2 ND CLASS BRICKS AS PER STANDARD PRACTICE, AND PROVIDING PVC LOW LEVEL FLUSHING SYSTEM OF 8 LITRES CAPACITY PARRYWARE SLIMLINE (WHITE) WITH INTERNAL COMPONENTS AND SHORT BEND, 12.70 MM PVC CONNECTION WITH BRASS UNION NUTS C.P COATED, INCLUDING CUTTING THE WALLS AND FLOORS AND MAKING GOOD THE SAME, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE.
1
-
2892.6
... More
SUPPLY, INSTALLATION, COMMISSIONING OF APPROVED MAKE FLOOR MOUNTED CLOSE COUPLED EWC SUIT CASCADE MODEL 'P' OR 'S' TRAP WITH DUAL FLUSH PORCELAIN CISTERN FIXED ON EWC WITH ALL INTERNAL PARTS OF DUAL FLUSH CISTERN, ULTRA SOLID SEAT COVER OF APPROVED MAKE WITH RUBBER BUFFER AND CAP, 15 MM ANGLE STOP COCK, 450 MM LONG PVC INTER CONNECTION PIPE, WALL FLANGES ALL OF APPROVED MAKE INCLUDING CUTTING THE WALLS AND FLOORS AND MAKING GOOD THE SAME, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM: WHITE COLOUR
2
-
9086
... More
SUPPLY AND FIXING WHITE GLAZED FLAT BACK HALF STALL URINALS OF 1 ST QUALITY CONFORMING TO IS2556-1995 WITH STANDARD CP SPREADER OF OVERALL SIZE 95X95X57 MM CONFORMING TO IS 2556-PART 6, SEC-6-1974 FIXED WITH SCREWS COMPLETRE INDIAN MAKE OF SIZE 590 X375 X390 MM INCLUDING 12.70 MM PVC CONNECTION WITH BRASS UNION NUTS C.P COATED, 38.10 MM C.P WASTE COUPLING, 38.10 MM PVC SOLID WASTE PIPE OUTLET, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE.
4
-
3392.6
... More
SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR PLAIN BEND 87.5 DEGREES AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
8
-
77
... More
SUPPLYING AND FIXING 75 MM DIA UV RESISTANT UPVC SWR PLAIN BEND 87.5 DEGREES AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
8
-
46.2
... More
SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR DOOR BEND 87.5 DEGREES AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
8
-
100.1
... More
SUPPLYING AND FIXING 75 MM DIA UV RESISTANT UPVC SWR DOOR BEND 87.5 DEGREES AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
8
-
62.7
... More
SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR SINGLE 'T' WITH DOOR AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
8
-
121
... More
SUPPLYING AND FIXING 75 MM DIA UV RESISTANT UPVC SWR SINGLE 'T' WITH DOOR AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
8
-
68.2
... More
SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR COWL AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
4
-
17.6
... More
SUPPLYING AND FIXING 75 MM DIA UV RESISTANT UPVC SWR COWL AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
4
-
13.2
... More
SUPPLYING AND FIXING BEST INDIAN MAKE 609.6X457.2mm T.V SHAPE MIRROR WITH PLASTIC FRAME MIRROR INCLUDING WOODEN BLOCKS, SCREWS ETC., INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., FOR FINISHED ITEM OF WORK COMPLETE.
4
-
548.2
... More
SUPPLYING AND FIXING 19.04 MM DIA, 609.60 MM LONG ALUMINUM ANODISED TOWEL ROD WITH BRACKETS AND SCREWS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., FOR FINISHED ITEM OF WORK COMPLETE.
4
-
172.5
... More
SUPPLYING AND FIXING NP SOAP DISH HEAVY TYPE WITH NP SCREWS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC.,COMPLETE FOR FINISHED ITEM OF WORK.
4
-
234.1
... More
BOXING OF NAHANI TRAPS IN RCC FLOORS, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC.,COMPLETE FOR FINISHED ITEM OF WORK.
8
-
178.2
... More
BOXING OF W.C TRAPS IN RCC FLOORS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC.,COMPLETE FOR FINISHED ITEM OF WORK.
4
-
356.4
... More
SUPPLYING, LAYING, JOINTING AND TESTING OF SINGLE SOCKET 160 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 6 Kg/cm2 CONFIRMING TO IS:13592-1992, AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING EXCAVATION OF TRENCHES AND SOCKET PITS IN ANY SOIL (EXCEPT ROCK REQUIRING BLASTING) UP TO 0.91M DEPTH AND REFILLING WITH EXCAVATED SOILS, WATERING, TAMPING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
40
-
643.3
... More
CONSTRUCTING 914.40 X 457.20 MM (3'-0'' X 1'-6") BRICK MASONARY INSPECTION CHAMBER WITH CM (1:6) PROP. USING 2ND CLASS CLAY BRICKS OF 225MM THICK , AND FITTED WITH 457.2 X 457.2 MM (1'-6" X 1'-6") RCC COVER UP TO A DEPTH OF 914.4 MM (3'-0") AND LAYING CEMENT CONCRETE (1:4:8) 150 MM THICK USING 40 MM HBG METAL AND PCC (1:2:4) BENCHING AND CHANNEL 100 MM THICK AS PER STANDARD SPECIFICATION FOR FINISHED ITEM OF WORK.
2
-
5766.2
... More
SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 41.30 MM OD PIPES SDR 13.5
60
-
292.6
... More
SUPPLYING AND FIXING 40 MM NB SIZE GM GATE(PEET) VALVE AS PER IS - 778, CLASS-I, INDIAN MAKE HEAVY TYPE, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
2
-
2400
... More
SUPPLYING AND FIXING 40 MM NB SIZE GM HORIZONTAL CHECK (NON RETURN) VALVE AS PER IS - 778, CLASS-I, INDIAN MAKE HEAVY TYPE, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
1
-
2101.9
... More
CONSTRUCTING BRICK MASONRY SUPPORT FOR CPVC / GI PIPE LINES WITH CM OF SIZE 304.80 X 228.60 X 228.60 MM, INCLUDING PLASTERING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
16
-
84.5
... More
SUPPLY AND FIXING OF 25MM OUTER DIA HEAVY (2.10MM THICKNESS) GRADE WITH IS:9537 PART 3 REGID PVC PIPE (ISI MARK) CONCEALED IN WALL WITH ALL REQUIRED ACCESSORIES INCLUDING MASONARY WORK FOR LIGHT, FAN AND SEPARATE PLUG POINT INCLUDING COST OF SUITABLE SIZE OF MODULAR METAL BOX OF THE SAME MAKE OF SWITCH INCLUDING ALL LABOUR CHARGES ETC., COMPLETE (MAKES: SUDHAKAR/VIP/GM
300
-
98
... More
SUPPLY AND FIXING OF 25MM OUTER DIA HEAVY (2.20MM THICKNESS) GRADE WITH IS:9537 PART 3 REGID PVC PIPE (ISI MARK) OF MAKES CONCEALED IN WALL WITH ALL REQUIRED ACCESSORIES INCLUDING MASONARY WORK AND LABOUR CHARGES ETC., COMPLETE. (FOR CIRCUIT MAINS, POWER SOCKETS AND COMPUTER BOARDS ONLY)
(MAKES: SUDHAKAR/VIP/GM
120
-
93.9
... More
SUPPLY AND FIXING OF 25MM OUTER DIA HEAVY (2.20MM THICKNESS) GRADE WITH IS:9537 PART 3 REGID PVC PIPE (ISI MARK) OF CONCEALED IN ROOF SLABS WITH ALL REQUIRED ACCESSORIES INCLUDING MASONARY WORK AND LABOUR CHARGES ETC., COMPLETE.
(MAKES: SUDHAKAR/VIP/GM
350
-
75.8
... More
SUPPLY AND FIXING OF 25MM OUTER DIA HEAVY (2.20MM THICKNESS) GRADE WITH IS:9537 PART 3 REGID PVC PIPE (ISI MARK) OF CONCEALED ON UNDERNEATH THE FLOORING WITH ALL REQUIRED ACCESSORIES INCLUDING MASONARY WORK AND LABOUR CHARGES ETC., COMPLETE.(MAKES: ISI MARK SUDHAKAR /VIP/GM)
100
-
73.4
... More
WIRING WITH 2 RUNS OF 14/0.3MM (1.0 SQ.MM) FIRE RETARDANT LOW SMOKE FRLS / HFFR PVC INSULATED 1100V GRADE AS PERIS:694/1990 SPECIFICATION FLEXIBLE COPPER CABLE IN EXISTING PIPE WITH 6A ONE WAY MODULAR SWITCH WITH 6 MODULAR COVER FRAME, 3 PLATE CEILING ROSE INCLUDING ALL LABOUR CHARGES ETC., COMPLETE FOR LIGHT, BELL, FAN AND EXHAUST FAN POINTS IN NON RESIDENTIAL BUILDINGS.
WIRE MAKE: (FINOLEX/RR KABEL/HAVELLS) CEILING ROSE: ANCHOR/ GOLD MEDAL OLIVE /MILLION ZOOM.
SWITCHES & COVER FRAME MAKE:LEGRAND ARTEOR/CARBTREE MURANO/GM-ZENOVA
88
-
578
... More
WIRING WITH 2 RUNS OF 14/0.3MM (1.0 SQ.MM) FIRE RETARDANT LOW SMOKE FRLS / HFFR/ZHFR PVC INSULATED 1100V GRADE AS PERIS:694/1990 SPECIFICATION FLEXIBLE COPPER CABLE IN EXISTING PIPE WITH 6A TWO WAY MODULAR SWITCH WITH 6 MODULAR COVER FRAME, 3 PLATE CEILING ROSE INCLUDING ALL LABOUR CHARGES ETC., COMPLETE FOR STAIRCASE LIGHT POINTS IN NON RESIDENTIAL BUILDINGS.
WIRES WIRE MAKE: (FINOLEX/RR KABEL/HAVELLS) CEILING ROSE: ANCHOR/ GOLD MEDAL OLIVE /MILLION ZOOM.
SWITCHES & COVER FRAME MAKE:LEGRAND ARTEOR/CARBTREE MURANO/GM-ZENOVA
2
-
867
... More
WIRING WITH 2 OF 14/0.3MM (1.0 SQ.MM)FIRE RETARDANT LOW SMOKE FRLS / HFFR/ZHFR PVC INSULATED 1100V GRADE AS PERIS:694/1990 SPECIFICATION FLEXIBLE COPPER CABLE IN EXISTING PIPE WITH 6/10A ONE WAY MODULAR SWITCH CONTROL AND 3/2 PIN MODULAR SOCKET FIXING ON SEPARATE BOARD WITH 3 MODULE COVER FRAME INCLUDING ALL LABOUR CHARGES ETC., COMPLETE.
WIRES MAKE:(FINOLEX/RR KABEL/HAVELLS) SWITCHES & COVER FRAME MAKE: LEGRAND ARTEOR/CARBTREE MURANO/GM-ZENOV.
10
-
512.3
... More
SUPPLY AND FIXING OF 6/10A 3/2 PIN MODULAR PLUG SOCKET WITH 6/10A ONE WAY MODULAR SWITCH CONTROL ON A COMMON SWITCH BOARD COVERED WITH 3 MODULE COVER FRAME INCLUDING EARTH CON AND INCLUDING WIRE LEADS, EARTH CONNECTIONS ALONG WITH ALL LABOUR CHARGES ETC., COMPLETE. MAKE: LEGRAND ARTEOR/CARBTREE MURANO/GM-ZENOV.
13
-
405
... More
SUPPLY AND FIXING OF 16/20A MODULAR 1 WAY COMBI SOCKET WITH SHUTTER AND 16A / 20A 1 WAY MODULAR SWITCH DULY RECESSED IN WALL WITH 4 MODULAR BOX AND 3 MODULAR COVER FRAME INCLUDING EARTH CONNECTIONS AND ALL LABOUR CHARGES ETC., COMPLETE. MAKE: LEGRAND ARTEOR/CARBTREE MURANO/GM-ZENOVA/
9
-
676
... More
SUPPLY AND FIXING OF 16/20A 1 WAY MODULAR SWITCH-1 NO WITH 20A MODULAR SOCKET -1NO AND 6/10AA 3/2 PIN MODULAR PLUG SOCKET - 3 NOS WITH 6A 1 WAY MODULAR SWITCH - 3 NOS WITH 12 MODULE BOX SIZE COVERED WITH 12 MODULE COVER FRAME INCLUDING EARTH CONNECTIONS AND ALL LABOUR CHARGES ETC., COMPLETE.(FOR COMPUTER SWITCH BOARD) MAKE: LEGRAND ARTEOR/CARBTREE MURANO/GM-ZENOVA
2
-
1650
... More
SUPPLY AND FIXING OF BATTEN HOLDER / SLANTING HOLDER IN LIEU OF CEILING ROSE OF LIGHT POINT COMPLETE WITH ALL CONNECTIONS AND ALL LABOUR CHARGES WITH 7W LED, 490LUMENS BULB (FOR NEW INSTALLATION).
HOLDER MAKE: ANCHOR / GOLD MEDAL OLIVE / MILLION ZOOM
LAMP MAKE:PHILLIPS / OSRAM / GE / CROMPTON.
13
-
260
... More
SUPPLY AND RUN OF 1 OF 14 /0.3MM (1.0 SQ.MM) FRLS / HFFR/ZHFR P.V.C. INSULATED 1100V GRADE AS PERIS:694/1990 SPECIFICATION FOR INSULATED FLEXIBLE COPPER CABLE IN EXISTING PIPE FOR EARTH CONTINUITY INCLUDING ALL LABOUR CHARGES ETC., COMPLETE. [FOR EARTH LEAD TO CIRCUIT MAINS, POWER SOCKETS].
MAKE: FINOLEX/RR KABEL/HAVELLS
870
-
22
... More
SUPPLY AND RUN OF 2 OF 36 /0.3MM (2.5 SQ.MM) FRLS / HFFR/ZHFR P.V.C. INSULATED 1100V GRADE AS PERIS:694/1990 SPECIFICATION FOR INSULATED FLEXIBLE COPPER CABLE IN EXISTING PIPE FOR RUN OF CIRCUITS, POWER PLUGS & COMPUTER BOARDS INCLUDING ALL LABOUR CHARGES ETC., COMPLETE. MAKE:FINOLEX/RR KABEL/HAVELLS
640
-
73.8
... More
SUPPLY AND RUN OF 2 OF 56/0.3MM (4 SQ.MM) FRLS / HFFR/ZHFR PVC INSULATED 1100V GRADE AS PERIS:694/1990 SPECIFICATION FOR COPPER CABLE IN EXISTING PIPE FOR MAINS INLCUDING ALL LABOUR CHARGES ETC., COMPLETE.[FROM DISTRIBUTION BOARDS TO A/C POINTS AND MAINS TO LDB].
MAKE:FINOLEX/RR KABEL/HAVELLS
100
-
112.1
... More
SUPPLY AND RUN OF 2 OF 84/0.3MM (6 SQ.MM) FRLS / HFFR/ZHFR PVC INSULATED 1100V GRADE AS PERIS:694/1990 SPECIFICATION FOR COPPER CABLE IN EXISTING PIPE FOR MAINS INLCUDING ALL LABOUR CHARGES ETC., COMPLETE.[FROM DISTRIBUTION BOARDS TO A/C POINTS AND MAINS TO LDB].
MAKE:FINOLEX/RR KABEL/HAVELLS
120
-
153.8
... More
SUPPLY AND RUN OF 1 OF 36 /0.3MM (2.5 SQ.MM) FRLS / HFFR/ZHFR P.V.C. INSULATED 1100V GRADE AS PERIS:694/1990 SPECIFICATION FOR INSULATED FLEXIBLE COPPER CABLE IN EXISTING PIPE FOR EARTH CONTINUITY INCLUDING ALL LABOUR CHARGES ETC., COMPLETE. [FOR EARTH LEAD TO A/C POINTS AND DISTRIBUTION BOARDS].
MAKE:FINOLEX/RR KABEL/HAVELLS
220
-
37
... More
SUPPLY AND FIXING OF MODULAR SOCKET TYPE TELEPHONE JACK WITH CONNECTOR ON 2 MODULAR BOX AND COVER FRAME INCLUDING GIVING CONNECTIONS, COST OF ALL ACCESSORIES AND LABOUR CHARGES ETC., COMPLETE. MAKE:LEGRAND MYRIUS/CARBTREE THAMES PLATINUM.
1
-
310
... More
SUPPLY AND RUN OF 5 PAIR, 0.5MM TELEPHONE COPPER WIRE OF MAKES FINOLEX / DELTON / POLYCAB INCLUDING ALL LABOUR CHARGES ETC., COMPLETE.
20
-
38.2
... More
SUPPLY INSTALLATION TESTING AND COMMISIONING OF1NO OF CAT6 TOOLESS BUILTIN CRIMPING MECHANISM INFORMATION OUTLET WITH DUST COVER EXCEED ANSI/TIA-568-C.2 AND ISO/IEC 11801 STANDARDS WITH 1MODULE FACE PLATE FOR CATEGORY 6 COMPONENT PERFORMANCE & COMPATIBLE TO T568A,T568B WIRING PATTERN AND UL-940V0 RATED PLASTIC &ROHS COMPLIANT
MAKES: SYSTIMAX /AMP/ PANDUIT/ SIEMOND/ MOLEX/LEGRAND
1
-
480
... More
SUPPLY AND RUN OF LAN CABLE CAT - 6 UTP CABLE IN EXISTING PVC CONDUIT INCLUDING COST AND CONVEYANCE OF ALL MATERIALS AND LABOUR CHARGES ETC., COMPLETE.
MAKES:D LINK / AMP / MOLEX / LEGRAND / KRONE.
20
-
45.9
... More
SUPPLY OF 48" (1200MM) SWEEP 5 STAR RATED CEILING FAN, WITH DOUBLE BALL BEARINGS WITHOUT REGULATORINCLUDING COST AND CONVEYANCE OF ALL MATERIALS AND LABOUR CHARGES ETC., COMPLETE.
MAKES: CROMPTON HS DECORA / HAVELLS ES PLUS / ORIENT SUMMER CROWN
15
-
2555
... More
SUPPLY OF 400W STEPPED TYPE ELECTRONIC REGULATOR INCLUDING COST AND CONVEYANCE OF MATERIALS AND LABOUR CHARGES ETC., COMPLETE. MAKE: LEGRAND ARTEOR/CARBTREE MURANO/GM-ZENOV.
15
-
396
... More
LABOUR CHARGES FOR FIXING OF CEILING FAN AND REGULATOR INCLUDING TRANSPORTATION AND GIVING CONNECTIONS WITH TWIN CORE WIRE ETC., COMPLETE.
15
-
186
... More
SUPPLY AND TRANSPORTATION OF 18W, 1800 LUMENS,T8,1200MM LENGTH LED PATTY TYPE TUBE LIGHT, INPUT VOLTAGE AC 220 - 260 VOLTS WITH PF0.9, SURGE PROTECTION: KV,THD15%, WITH INBUILT DRIVER AND FROSTED COVER CCT: 3000K - 5700K, MINIMUM CRI70, .ETC., COMPLETE
MAKES: PHILLIPS / GE / CROMPTON.
54
-
935
... More
FIXING OF 18W LED TUBE LIGHT LUMINAIRE ON WALL / CEILING WITH ALL ACCESSORIES INCLUDING GIVING CONNECTIONS AND ALL LABOUR CHARGES ETC., COMPLETE.
54
-
150
... More
SUPPLY OF FRESH AIR EXHAUST FAN OF LIGHT DUTY 250V A.C.50HZ../ 300MM SIZE (12") 1350 R.P.M METALLIC BODY PLASTIC BLADES, WIRE MESH, ETC., COMPLETE. COMPLETE.MAKE CROMPTON/ORIENT.
3
-
1361
... More
LABOUR CHARGES FOR FIXING OF EXHAUST FAN IN WALL WITH NECESSARY CONNECTIONS AND MASONARY WORK OF MAKING HOLE, FINISHING ETC., COMPLETE.
3
-
548
... More
SUPPLY AND FIXING 4WAY TPN D.B WITH BOARD WITH IP-30 PROTECTION SUITABLE FOR THREE PHASE 40A FP MCB - 1 NO FOR INCOMER, 10KA-6-32A SP MCBS - 12 NOS FOR OUTGOING. INCLUDING INTERNAL CONNECTION AND LABOUR CHARGES FOR SURFACE / FLUSH MOUNTING ETC., COMPLETE.(FOR DB)
MAKE: LEGRAND(EKINOX 3) / SCHNEIDER-ACTI9 / SEIMENS /L&T NEWRANG
1
-
7763
... More
SUPPLY AND FIXING 6WAY TPN D.B WITH BOARD WITH IP-43 PROTECTION SUITABLE FOR THREE PHASE 63A FP MCB - 1 NO FOR INCOMER, 10KA-6-32A SP MCBS - 18NOS FOR OUTGOING. INCLUDING INTERNAL CONNECTION AND LABOUR CHARGES FOR SURFACE / FLUSH MOUNTING ETC., COMPLETE.(FOR DB)
MAKE: LEGRAND(EKINOX 3) / SCHNEIDER-ACTI9 / HAVELLS/INDO ASAIN
1
-
10931
... More
SUPPLY AND TRANSPORTATION OF 60W LED FLOOD LIGHT LUMINAIRE MADE OF PRESSURE DIECAST ALLUMINIUM HOUSING WITH POWDER COATED,HAVING PROTECTIVE TOUGHNED GLASS,SUPPLY INPUT VOLTAGE 120 - 270 V AC, P.F 0.90, HIGH POWER LED'S SYSTEM EFFICACY 100LM/W AND JUNCTION TEMPRATURE 70°C, WITH INGREES PROTECTION IP66, LUMINAIRE PERFORMANCE COMPLIES TO IS 10322 (PART 5 / SEC-3), IK05, DRIVER SURGE PROTECTION 4KV, EXTERNAL SURGE PROTECTION ≥ 10KV WITH WIDE/ NARROW BEAM OPTICS, THD10% AT 110 VOLTS AC, DRIVER EFFICIENCY 90%, , CCT: 3000K - 5700K, MINIMUM CRI70, ETC., COMPLETE.
MAKE : WIPRO / PHILIPS/ GE-VENTURE / CROMPTON/ BAJAJ
1
-
7150
... More
FIXING OF LED FLOOD LIGHT LUMINAIRE ON WALL WITH 3CX 2.5 SQ.MM FLEXIBLE COPPER CABLE ETC.,INCLUDING ALL LABOUR CHARGES FOR MASON WORK AND GIVING CONNECTIONS ETC., COMPLETE.
1
-
527
... More
SUPPLY AND TRANSPORTATION OF 20W LED STREET LIGHT LUMINAIRE MADE OF PRESSURE DIECAST ALLUMINIUM BODY WITH POWDER COATED, HAVING PROTECTIVE TOUGHNED GLASS, SUPPLY INPUT VOLTAGE 120 - 270 V AC, P.F 0.90, HIGH POWER LED'S HAVING SYSTEM EFFICACY 110 LM/W AND JUNCTION
TEMPRATURE 70°C, WITH INGREES PROTECTION IP66, LUMINAIRE PERFORMANCE COMPLIES TO IS 10322 (PART 5 / SEC-3), DRIVER SURGE PROTECTION 4KV, EXTERNAL SURGE PROTECTION 10 KV WITH OPTICS DISTRIBUTION , THD10% AT 110 VOLTS AC, DRIVER EFFICIENCY 90%, CCT: 3000K - 5700K, MINIMUM CRI70, ETC., COMPLETE MAKE : PHILIPS (GREEN LINE) / GEVENTURE/ CROMPTON(HAWK) / BAJAJ (EDGE+)
4
-
2420
... More
FIXING OF LED STREET LIGHT LUMINARY WITH 1.0 MTR., 25MM DIA GI PIPE BRACKET AND ANTI TILTING MS FLAT ETC., INCLUDING GIVING CONNECTIONS AND LABOUR CHARGES ETC., COMPLETE.
4
-
581
... More
PROVIDING INDEPENDENT EARTHING FOR IMPORTANT EQUIPMENT WITH 40MM DIA 'B' CLASS 2.5M LONG G.I PIPE AND 19MM DIA 'B' CLASS G.I PIPE OF 0.3MTR. LONG CONNECTED WITH REDUCER PROVIDING G.I FUNNEL WITH MESH ENCLOSED IN C.C.CHAMBER OF 400M X 400M X 400MM WITH R.C.C. SLAB COVER DULY PROVIDING STAGGERED HOLES FILLING WITH SALT AND CHARCOAL FROM THE BOTTOM OF THE PIPE GIVING EARTH CONNECTION FROM ELECTRODE THROUGH G.I STRIP OF 25 X 6MM X 200MM LENGTH WITH ALL ACCESSORIES AND LABOUR CHARGES COMPLETE, AS PER IS SPECIFICATIONS 732/1982 (PART II)
2
-
10830
... More
SUPPLY AND RUN OF NO.8 SWG G.I WIRE INCLUDING COST OF ALL ACCESSORIES AND LABOUR CHARGES ETC., COMPLETE.
20
-
20
... More
SUPPLY AND FIXING OF 50MM DIA GI PIPE ISI MARK WITH FITTING SUITABLE FOR ENCASING THE CABLE ALONG POLE INCLUDING COST AND CONVEYANCE OF ALL MATERIALS ETC., COMPLETE FOR FINISHED ITEM OF WORK.
15
-
479.6
... More
SUPPLY OF 16SQMM 4CORE XLPE INSULATED, 1100V GRADEARMOURED ALLUMINIUM CABLE AS PER SPECIFICATION CONFIRMING TO IS:7098 (PART - I)
MAKES: TORENT / UNIVERSAL / UNICAB
60
-
171
... More
EARTH WORK EXCAVATION OF TRENCH IN HARD GROUND SOIL, LAYING OF U.G CABLES UPTO 50 SQ,MM ON SAND CUSHION COVERING THE CABLE WITH BRICKS AND BACK FILLING OF TRENCH DULY PROVIDING ROUTE INDICATOR EMBEDDED IN C.C INCLUDING COST AND CONVEYANCE OF MATERIALS AND LABOUR CHARGES ETC., COMPLETE.
40
-
213
... More
SUPPLY AND MAKING ONE END TERMINATION WITH HEAVY DUTY SINGLE COMPRESSION BRASS GLAND AS PER BS 6121:2005 ,IP 66 COMPLETE, SIBG TYPE, HEAVY DUTY ALLUMINIUM LUGS DULY CRIMPED WITH CRIMPING TOOL, PVC TAPE ETC FOR FOLLOWING SIZE OF ARMOURED PVC INSULATED & PVC SHEATHED/ 16 SQMM 4 CORE XLPE ALUMINIUM CONDUCTOR CABLE OF 1100 VOLT GRADE AS REQUIRED OF SIZE.MAKES:DOWELS/COMET/SMI
2
-
110
... More
SUPPLY AND ERRECTING OF TRIPPLE POLE NEUTRAL 415V 100A BUSBAR CHAMBER AS PER IS:8623 SHEET STEEL ENCLOSURE WITH COPPER BARS AND SIZE OF BUSBAR CHAMBER IS 445X405X120MM ETC., COMPLETE.INCLUDING COST AND CONVEYANCE OF ALL MATERIALS AND LABOUR CHARGES ETC., COMPLETE.MAKE: SPUTNIK.
1
-
2000
... More
SUPPLY AND ERRECTING OF TRIPPLE POLE SHEET METAL/IRON CLAD SWITCH APPROVED MAKE REWIRABLE TYPE 415V 63A WITH CONDUIT ENTRY ERRECTED AN ANGLE IRON FRAME COVERED WITH 3MM THICK WHITE HYLAM SHEET COVER ETC.,COMPLETE.INCLUDING COST AND CONVEYANCE OF ALL MATERIALS AND LABOUR CHARGES ETC., COMPLETE.MAKE : HAVELLS/STANDARD/HPL/INDO ASAIN
1
-
5021
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements