Panchayat Raj Engineering Department Tender

Vibrated Reinforced Cement Concrete M20 Nominal Mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding seigniorage charges, cost of steel and it’s fabrication charges for finished item of work. The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST (APSS No. 402 & 403) For Roof Slab 125mm Thick

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. 20mm thick (average) mixing with water proofing compound from reputed manufacturers as approved by Engineer-in- charge at 1 Kg/bag of cement laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cm x 45cm including cost and conveyance of materials like cement, sand (screened), water proofing compound etc., to site and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., complete for finished item of work. The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST (APSS No. 901 & 903)

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) steel bars (FE 500 grade as per IS 1786-1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., complete for finished item of work in all floors. The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding GST (APSS No.126)

TOTAL 04 (Four ) ITEMS