Panchayat Raj Engineering Department Tender

Filling in foundation trenches / Pipe bedding with Sand as per drawing and technical specification Clause 305.3.9 MoRD & 304 MoRTH ,including contractors profit & Over head charges, but excluding GST and seigniorage etc., complete.

Providing concrete for plain concrete M 10 grade in open foundations using 40 mm nominal size Graded hard stone aggregate (HBG), mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MoRD and 1500, 1700 & 2100 MoRTH, including contractors profit & Over head charges, and excluding GST & seigneorage charges. etc., complete For levelling course

Plain cement concrete M20 grade using 40, 20 & 10 mm metal (HBG) mechanically mixed in foundation complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MoRD and 1500, 1700 & 2200 MoRTH, including contractors profit & Over head charges, but excluding GST and Seigneorage etc., complete Cut off walls and Foundations.

Reinforced cement concrete M25 grade (Design Mix) using 25 & 10 mm metal (HBG) mechanically mixed in foundation complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MoRD and 1500, 1700 & 2200 MoRTH, including contractors profit & Over head charges, but excluding GST and Seigneorage etc., complete for foundations.

Plain cement concrete M20 grade using 40, 20 & 10 mm metal (HBG) mechanically mixed in foundation complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MoRD and 1500, 1700 & 2200 MoRTH, including contractors profit & Over head charges, but excluding GST and Seigneorage etc., complete Cut off walls and Foundations for footings .

Plain cement concrete M20 grade using 40, 20 & 10 mm metal (HBG) mechanically mixed in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MoRD and 1500, 1700 & 2200 MoRTH, including contractors profit & Over head charges, but excluding GST and Seigneorage etc., complete for Substructure of piers, Abutments and Wing Walls.

Reinforced cement concrete M25 grade (Design Mix) using 25 & 10 mm metal (HBG) mechanically mixed in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MoRD and 1500, 1700 & 2200 MoRTH, including contractors profit & Over head charges, but excluding GST and Seigneorage etc., complete for Bed blocks / Backing Walls.

Vibrated reinforced cement concrete M30 (Design Mix) grade using 20 & 10 mm metal (HBG) mechanically mixed in superstructure as per drawing and technical specifications Clauses 800 and 1205.4 and 1205.5 MORD / SEctions 1500, 1600 & 1700 MORTH, including contractors profit & Over head charges, but excluding GST and seigniorage etc., complete for super structure (Deck slab)

PCC 15 ordinary grade leveling course below approach slab complete as per drawing and technical specification Clause 800 &1211 MORD & 2700 MORTH including contractors profit & Over head charges, but excluding GST and seigniorage etc., complete

Vibrated reinforced cement concrete M30 (Design Mix) grade using 20 & 10 mm metal (HBG) mechanically mixed in Approach slabs as per drawing and technical specifications Clauses 800 and 1205.4 and 1205.5 MORD / SEctions 1500, 1600 & 1700 MORTH, including contractors profit & Over head charges, but excluding GST and seigniorage etc., complete for approach slabs.

Providing and laying cement concrete Wearing Course M30 (Design Mix) grade using 20 & 10 mm metal (HBG) mechanically mixed in excluding reinforcement complete as per drawing and technical specifications Clauses 800 and 1206.3 and 2702 MORTH, including contractors profit & Over head charges, but excluding GST and seigniorage etc., complete for Deck Slab

Cost, supply and fixing of Bituminous Mastic pad 25.4mm including cost and conveyance and all labour charges and including contractors profit & Over head charges, but excluding GST etc., complete

Supplying, fitting, and placing HYSD bar reinforcement (FE-415) in foundation complete as per drawing and technical specifications Clauses 1000,1202 MoRD / 1100, 1600 MoRTH, for Bars below 36 mm dia including over laps and wastage, where they are not welded ,including contractors profit & Over head charges, but excluding GST etc., complete

Supplying, fitting, and placing HYSD bar reinforcement (FE-500) in Substructure complete as per drawing and technical specifications Clauses 1000,1202 MoRD / 1100, 1600 MoRTH, for Bars below 36 mm dia including over laps and wastage, where they are not welded ,including contractors profit & Over head charges, but excluding GST etc., complete.

Supplying, fitting, and placing HYSD bar reinforcement (FE-500) in Super Structure complete as per drawing and technical specifications Clauses 1002,1010 and 1202 MoRD / 1600 MoRTH, for Bars below 36 mm dia including over laps and wastage, where they are not welded ,including contractors profit & Over head charges, but excluding GST etc., complete .

Providing weep holes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 MoRD / 2706 & 2200 MoRTH including contractors profit & Over head charges, but excluding GST and seigniorage etc., complete

Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification Clause 1206.3 MORD / 710.14 of IRC, 78 & 2200 MORTH, including contractors profit & Over head charges, but excluding GST and seigniorage etc., complete

Backfilling behind abutment, wind wall and return wall complete as per drawings and Technical Specification clauses 1204.3.8 MORD /710.14 of IRC 78&2200 MORTH, including contractors profit & Over head charges, but excluding GST and seigniorage etc., complete

Jeddy Stone Dry Packing for Aprons and Revetments Section 1300 MORD including cost and conveyance of all materials and labour charges etc.complete including all over heads and contractors profit but excluding GST and seigniorage etc., complete

Painting to crash barrier two coats wiht white cement to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all material including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., including all over heads and contractors profit but excluding GST and seigniorage etc., complete

Bridge Approaches

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MoRD including contractors profit & Over head charges, but excluding GST and Seigniorage charges etc., complete.

Construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80-100 KN to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 MORD including contractors profit & Over head charges, but excluding GST etc., complete.

Construction of granular sub-base by providing well graded material(Table 400.1-A) with Grading III Material(HBG M/C +Stone dust) CBR Value not less than 20 and PI Value less than 6 spreading in uniform layers with Tractor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD including contractors profit & Over head charges, but excluding GST and seigniorage etc., complete.

Construction of Shoulders by providing selected earth having minimum CBR of 10%, MDD not less than 1.85 g/cc with LL & PI not more than 40% and 20 respectively and spreading in uniform layers with tractor grader on prepared surface, and compacted at OMC with vibratory roller 80-100 kN to meet requirement of Table 300.2 with as per Technical Specification Clause 303 & 407 MoRD, by using machinery including contractors profit & Over head charges, but excluding GST and seigniorage etc., complete.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MoRD, including contractors profit & Over head charges, but excluding GST and seigniorage etc., complete

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 Kg/Sqm using mechanical means as per Technical Specification Clause 502 MoRD (for use on Wet mix macadam & WBM), including contractors profit & Over head charges, but excluding GST etc., complete for Prime Coat

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 Kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503 MoRD, including contractors profit & Over head charges, but excluding GST etc., complete for Tack Coat

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates (Table 500.13) either using penetration grade bitumen 60/70 grade at the rate of 14.6 Kg/10 Sqm to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a Hot Mix plant of 30-40 TPH, laying and rolling with a three wheel 0-100 KN static roller capacity, paver finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C including cost and conveyance of all materials from approved sources, labour charges and hire and operational charges of power road roller and all other machinery, tools and plants, providing barricading for diversion of traffic, erecting red flags other incidental and operational charges etc., complete for finished item of work as per clause 506 MoRD' 2014 including contractors profit & Over head charges, but excluding GST and seigniorage etc., complete using HMP

Providing and laying bituminous premixed seal coat (Type C) comprising of stone chipping of grading as defined in table 500.16 of MoST with Crushed stone chips of 6.7 mm size 100% passing through 9.5 mm seive and retained on 2.36 mm sieve applied @ 0.09 cum per 10 sqm, chips to be premixed by mechanical means .with the bitumunous binder using 6.50 Kgs of bitumen VG 30 grade for 10 sqm and rolling with power roller including of required line, level, grade to serve as wearing course on previously prepared surface and finishing to required level and grades including cost and conveyance of all materials from approved sources and stacking at site to departmental gauge for premeasurements, labour charges and hire and operational charges of power road roller 8 to 10 tonnes capacity and all other machinery, tools and plants, providing barricading for diversion of traffic, erecting red flags other incidental and operational charges etc., complete for finished item of work as per technical specification clause 508 of MoRD' 2014 including contractors profit & Over head charges, but excluding GST and seigniorage etc., complete for seal coat.By Mechanical Means

Providing and laying pitching on slopes laid over prepared filter media/ gravel backing as per drawing and technical specification clause 1302 MORD/ 2504 MORTH including contractors profit & Over head charges, but excluding GST and seigniorage etc., complete

Road Furniture

Providing & fixing of typical PMGSY informatory sign board with LOGO as per MORD secifications and drawing. Three MS plates of 1.6mm thick, top and middle plate duly welded with MS flat iron 25mmx5mm size on black on edges. The lower plate will be welded with MS angle iron frame of lower most plate and flate iron frame of middle plate will be welded to 2 nos 75mmx75mm of 12 SWG sheet tubes posts duly embedded in CC M15 grade blocks of 450mmx450mmx600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mmx47mm of 12 SWG sheet plate tube. All MS will be stove enmeled on both sides. Lettering and paining of superior quality in required shede and colour. All sections of framed posts and sheet tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 and annexure 1700.1 MORD including all over heads and contractors profit but excluding GST etc., complete.

Providing and fixing of semi-reflective cautionery, mandatory and informatory boards as per IRC:67 made of 1.5mm thick MS sheet duly stove enamelled paint in white colour in front and grey colour on back with red reflective boarder of 65mm width and required letters and figures with reflective engineering grade tape as per clause 1701.3.8 of MORD for rural roads specification of required shade and colour supported and welded on 47x47mm of 12 SWG square tube of 3050mm height duly strenthened by 25x5mm MS flat iron on edges on back firmly fixed to ground by means of properly designed foundations with M-15 grade CC 450x450x600 mm , 600mm below ground level as per approved drawings and technical specification Clause 1701.2.2 of MORD including contractors profit & Over head charges, but excluding GST and seigniorage etc., complete with 600X 600 mm size MS sheet