Nuclear Fuel Complex Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Nuclear Fuel Complex - NFC Tender
Eprocure
Opening Date27 Sep 2021
Closing Date20 Oct 2021
Tender Amount₹ 8,52,00,000
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_NFC_650137_1Bid Award Id
ViewTender No
C/1255/2021Tender Authority
Nuclear Fuel Complex ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Hard rock ( by chiselling or wedging or rock hammer and cutter or hydraulic splitter or by using machine such as poclain with jack hammer or controlled blasting or by approved chemical method as directed by EIC)
100
-
-
Earth work excavation in foundation pits, trenches etc in hard rock by chiselling or by using machine such as Poclain with Jack hammer etc. upto depths mentioned below including shoring if necessary, dressing the sides, trimming, ramming and preparing the bed for foundation and refilling around the foundation and in plinth with selected excavated earth, in layers not exceeding 150mm. thick, watering, consolidation to the satisfaction of Engr-in charge and disposing of the surplus earth within a lead of 150m etc. all complete as per specifications, drawings and as directed by the Engineer-in-charge. Upto 1.5 m from ground level
-
-
-
From GL Upto 1.5 Mtrs below
-
-
-
Soft rock
50
-
-
Hard rock ( by chiselling or wedging or rock hammer and cutter or hydraulic splitter or controlled blasting/by using machine/ such as poclain with jack hammer or controlled blasting or by approved chemical method as directed by EIC)
750
-
-
Below 1.5 Mtrs to 3.00 Mtrs
-
-
-
Soft rock
50
-
-
Hard rock ( by chiselling or wedging or rock hammer and cutter or hydraulic splitter or controlled blasting/by using machine/ such as poclain with jack hammer or controlled blasting or by approved chemical method as directed by EIC)
250
-
-
Below 3.0 Mtrs to 4.50 Mtrs
-
-
-
Soft rock
50
-
-
Hard rock ( by chiselling or wedging or rock hammer and cutter or hydraulic splitter or controlled blasting/by using machine/ such as poclain with jack hammer or controlled blasting or by approved chemical method as directed by EIC)
250
-
-
Filling available excavated earth (Crushed Sand avialable inside campus) in plinth , sides of foundation etc., in layers not exceeding 20cm in depth , consolidating each deposited layer by ramming and watering , lead upto 50m and lift upto 1.5m.
2000
-
-
Lead charges for additional lead over the initial lead of 50 m by mechanical transport, including loading, unloading, stacking, the disposable soil, rock etc., Note: Measurement of lead charges will be based on truck measurement with a deduction of voids @20% and 50% for soils and rock or debris respectively
-
-
-
For rock/debris lead above 1 KM upto 3KM
1000
-
-
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 10 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
2000
-
-
Supplying and filling of crushed sand including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
100
-
-
Supplying and spreading pesticides chlorpyriphos or other chemical approved by central insecticides board as directed by the manufacturer and spraying the mixture uniformly by sprayer as pre-construction anti- termite treatment at the rate of 7.5 liters per sq.m. on vertical and 5 ltrs. per sq.m. on horizontal surfaces (or as directed by the manufacturer ) within the trenches, 50% of the emulsion to be filled in the holes made in trenches at 150mm. centre to centre etc. complete as per IS 6313 Part-II. (The payment will be made on the basis of plinth area measurement only at ground floor/stilt area for all stages of operation and vertical face will not be measured for payment) all complete as per specifications, drawings and as directed by the Engineer in charge a) This item will be executed through approved agency who is a member of Indian Pest Control Association, approved by Central Insecticides Board. b)The contractor shall have to furnish ten years guarantee in the prescribed proforma as per Section-10 (iv) Conditions and clauses of contract-2008, to maintain the anti-termite treated area/structure free from termite
c) Prior approval of Engineer in Charge shall be obtained after testing the chemical for antitermite to be used and shall be tested in approved laboratory and to be submitted to Engineer in Charge . Cost of testing shall be included in the rates quoted.
1500
-
-
II. CONCRETE (PLAIN AND REINFORCED) :
-
-
-
Plain Cement Concrete 1:3:6 using Portland Pozzolana Cement conforming to IS 1489 Part-1 (M/s. ACC, Ultra Tech, Birla, Ambuja make) with crushed stone sand and graded stone aggregates of 20mm maximum size at all depths/heights below/above plinth level including consolidation, finishing smooth/broom finish as applicable, curing, etc., but excluding Formwork, complete as specified and directed.
250
-
-
Plain Cement Concrete 1:2:4 using Portland Pozzolana Cement conforming to IS 1489 Part-1 (M/s. ACC, Ultra Tech, Birla, Ambuja) with crushed stone sand and graded stone aggregates of 20mm maximum size at all depths/heights below/above plinth level including consolidation, finishing smooth/broom finish as applicable, curing, etc., but excluding Formwork, complete as specified and directed.
25
-
-
Reinforced Cement Concrete by insitu mixing using Weigh Batching or RMC of Ultra Tech, Birla Ready Mix of Grade M - 35 (Minimum Cementitious Content not less than 350 Kg/Cum) up to specified level using Portland Pozzolana Cement conforming to IS 1489 Part-1 (M/s. M/s. ACC, Ultra Tech, Birla, Ambuja) with crushed stone sand and graded stone aggregates of 20mm maximum size including mixing superplasticizer of brand M/s. Fosroc, Demech, Huntsman, Pidilite, Sunanda Chemicals, Agro Chemicals, MBT in proportion as per Manufacturer's Specifications, Pumping / Lifting of concrete to the required heights, Concrete laid to proper level, profile and slope, placing concrete, consolidation, finishing, curing, etc., but excluding Formwork and reinforcement as specified and directed.
-
-
-
Below FFL including grade slab
680
-
-
Above FFL
870
-
-
Providing and mixing Corrosion Inhibiting Admixture Conplast WL of M/s. Fosroc orequivalent of M/s Krishna Conchem in the concrete etc., complete as specified and directed. NOTE: The Dosage and other mixing methodology should be as per manufacturer's specifications
3100
-
-
Casting and fixing in position precast reinforced cement concrete covers of required size in RCC M-20 insitu mixing BY WEIGH BATCHER using Portland Pozzolana Cement conforming to IS 1489 Part-1 (M/s. ACC, Ultra Tech, Birla, Ambuja make), crushed stone sand , graded stone aggregate of 10 mm maximum size at and at all depths and heights below and above plinth level including mixing superplastizer (M/s. Fosroc, Demach, Huntsman, Pedilite, Sunanda Chemicals, Agro Chemicals, MBT) in proportion as per manufacturer’s specifications including necessary shuttering, providing and fixing cover blocks of required sizes, consolidation finishing as specified, curing, making casting yard and curing tank, stacking carefully at casting yard and transporting to the site of use placing in position as shown in drawings, aligning, leveling, making good all the damaged surfaces etc., complete as directed for covers for storm water drains/trenches with and without holes including formwork but excluding reinforcement
25
-
-
III. FORM WORK :
-
-
-
Providing centering and shuttering using 12mm thick marine plyboard at all depths and heights below and above plinth level, vertical, horizontal, inclined,circular including strutting, propping using steel pipes/acro stagging, removal, cleaning of the same for insitu reinforced cement concrete and in plain cement concrete work, pockets for machine/equipmet foundations as required including chamfers, splays, keys, wedges, nails, bracings, brackets and applying one coat of shuttering oil on all shuttering surfaces coming in contact with concrete etc., complete as directed.
Note :- Plywood shall not be used for more than eight repitions.
-
-
-
a) Below and Upto Finish Floor Level
2000
-
-
b) Above Finish Floor Level
4800
-
-
IV. REINFORCEMENT & STRUCTURAL STEEL
-
-
-
Supply, fabrication and erection of Reinforcement bars for Reinforced cement concrete items at and at all depths and heights below and above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more conforming to IS 1786 of Tata, Vizag,Sail, JSW make, including transport to site, loading and unloading, making fan hooks of required shape, dowels for bonding masonry, transporting steel to site, decoiling, removing of scales, straightening, cutting, bending, fixing bars with chairs, space bars wherever required, in position with two strings of 18 gauge soft drawn annealed MS binding wire inclusive of its supply etc., complete as specified and directed.
295
-
-
Supply, Fabrication and Erection of Structural Steel work using Rolled Steel Joists, Beams, Channels, Plates, etc., at all levels above and below plinth level including supplying of steel sections and plates conforming to BIS 2062 of make Vizag Steel, Tata, SAIL, Jindal Ispat or any other approved manufacturer using ingots of above manufacturer make, loading, unloading, transporting the steel to site of work, cutting, fabricating using welding/bolts, using weld rods of make D&H, Advani, Philips or its approved equivalent and/or bolts and nuts from approved source, erecting using derricks/pulleys/cranes or any suitable means, fixing in position and painting with one coat of approved red oxide zinc chromate primer and two coats of Synthetic Enamel paint as per manufacturers Specifications of make Asian Paint, Berger, Johnson and Nickelson, Nerolac, cleaning the sections /plates by suitable means, etc., complete as directed by the Engineer-in-Charge.
-
-
-
Using rolled sections
20
-
-
Using Plates /Chequered Plates including MS insert plates/ embedded plates/pipes in medium quality conforming to relevant BIS codes of required shape and size, welding anchoring legs not less than 12mm dia MS rods, placing in position in concrete while casting, including painting with one coat of approved red oxide zinc chromate primer as per drawing in line, level and plumb complete as directed. Note :- Anchoring Legs will be paid under relevant items
15
-
-
Supplying, fabricating, erecting and fixing in position, foundation bolts, through bolts etc. using MS rounds of make M/s Tata, Vizag Steel, Jindal or approved equivalent conforming to IS 432 and suitable nuts including threading, placing in position in concrete in level using template, providing grease and protective cover like covering with polyethelene sheet to bolts and nuts to correct levels complete and as directed by EIC.
2
-
-
V. STONE MASONRY :
-
-
-
Random rubble stone masonry using approved local stones in foundations/pedestals and plinth at and at all depths below finished floor level in cement mortar 1:6 (1 cement :6 using crushed stone sand of grade conforming to BIS 2116) including simultaneous flush pointing with the same mortar, bond stones, curing, etc., using crushed stone sand of grade conforming to BIS 2116, complete as specified and directed. (Stones to be used from the site)
50
-
-
VI. BRICK MASONRY :
-
-
-
Brick work using quality flyash (non modular) bricks of class designation 7.5 conforming to IS12894 using cement mortar 1:6 (1 cement :6 using crushed stone sand of grade conforming to BIS 2116) at and at all depths below plinth level in foundation and in plinth, storm water drains, etc., simultaneous pointing with same mortar below ground level, and ranking out joints above ground level, curing etc., complete as per specifications and as directed for sub structure etc.,
25
-
-
Brick work using quality flyash bricks of class designation 7.5 conforming to IS12894 using cement mortar 1:6 (1 cement :6 using crushed stone sand of grade conforming to BIS 2116 ) at all depths and heights below and above plinth level including pilasters, steel / tubular scaffolding, raking out joints, curing etc., complete as per specifications and as directed in super structure.
490
-
-
Half brick masonry using non modular fly ash bricks of class designation
10, conforming to IS :12894 in partition walls in cement mortar 1:4 (1 cement :4 using crushed stone sand of grade conforming to BIS 2116) all depths and heights below and above plinth level including scaffolding, raking out joints, curing, etc., complete including providing stiffeners of reinforced cement concrete 1:2:4, 115 mm x 75 mm size at every 900 mm height, necessary formwork, curing, etc., complete as per specifications and as directed but excluding reinforcement. Note:- Reinforcement will be paid under relevant item.
500
-
-
VII. PLASTERING AND POINTING :
-
-
-
Cement plastering 6 mm thick for ceiling with cement mortar 1:3 (1 cement :3 river sand) finished smooth finish with including hacking of concrete surfaces, preparation of surface, steel/tubular scaffolding, curing, etc., complete as directed.
2425
-
-
Cement plastering 15 mm thick for internal walls in cement mortar 1:4 (1 cement :4 river sand) , and at all heights above plinth level over brick walls or concrete surfaces including making necessary grooves in between junctions of brick masonry and RCC and also other places wherever required over brick walls or concrete surface, preparation of surface, steel/tubular scaffolding, curing, etc., complete as directed.
2620
-
-
Sand faced plaster 20 mm thick in 2 coats over exterior masonry and concrete surfaces at and at all heights above plinth level as given below with base coat in cement mortar 1:4 with approved integrated water proofing compound @ 2% by weight of cement, of M/s. Fosroc/Demach/ Huntsman/ Pedilite/ SIKA Qualcrete / MBT or as per manufacturer’s specifications, 12 mm thick and finishing coat in CM 1:3, 8 mm thick, final rendering, making necessary grooves, bands, drip moulds as required, finished smooth internal putty(lapam) of Birla/Jk of not less than thickness 1mm(one) thicknes) double steel/tubular scaffolding wherever necessary, hacking of concrete surfaces, curing, etc., complete as specified and directed.
1900
-
-
Providing and applying white cement based putty in two coats with average thickness not less than 1 mm, of Birla make or any other approved manufacturer, over the plastered wall surface (external/internal) to prepare the surface even and smooth complete.
5040
-
-
Providing Flush/ Ruled Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine river sand) including preperation of surface complete as specified and directed.
250
-
-
Providing and fixing plaster mesh/chicken mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm size 25mm x 25mm with a zinc coating of 120gms per sqm width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications.
650
-
-
Forming groove of uniform size from 12x12mm and upto 25x15mm in plastered surface as per approved pattern using wooden battens,nailed to the under layer including removal of wooden battens,repairs to the edges of plaster panel and finishing the groove complete as per specifications and direction of the Engineer-in-charge.
350
-
-
Forming 18 mm thick moulded cement mortar band in two coats under layer 12 mm thick with cement mortar 1:5 (1 cement : 5 coarse sand) top layer 6 mm thick with cement mortar 1:4 (1 cement : 4 fine sand) complete as per specifications and direction of the Engineer-in-charge.
350
-
-
VIII. PAINTING:
-
-
-
Wall & ceiling painting with premium acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.of Asian or equivalent in Pidilite, Johnson & Nicklson, Nerolac, berger brand, manufacture and shade over two coats of approved primer at all heights above plinth level including preparing the surfaces, scaffolding and cleaning, etc., complete and as directed.
5040
-
-
Painting exterior walls on sand faced plaster with two coats of Alkali & fungal resistance, dirt resistance exterior paint with comprehensive warranty of 5 years of required shade of Makes Asian - Apex Advanced or equivalent in Pidilite, Johnson & Nicklson, Nerolac, berger, of exterior quality haying 100% acrylic, of approved shade including preparing surfaces, external putty of Birla or its approved equivalent wherever required applying one coat of approved primer as per manufacturers specification, applying and filling cracks or wherever required for external filler, curing, scaffolding, cleaning, etc., complete. Note :- Minimum Usage Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. or as per manufacturer's specification
1900
-
-
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade for structural steel with Two or more coats over an under coat/coats of ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work of approved brand and manufacture etc. complete as specified and directed
500
-
-
Providing & applying of Dekguard S with a consumtion of 5 Sqmt/ltr which is an aliphatic acrylate solvent based protective coating shall be overcoated on a primed surface of Dekguard priimer having a consumption of 2.5Sqmt/Ltr, providing an outstanding resistance to aggresive agents like CO2,chloride ions, sulphates, UV light and rain including surface preparation done properly by cleaning, chipping and removing dirt particles of the concrete, masonary work with wire brush & washing with water jetetc. complete as specified and directed
500
-
-
IX FLOORING :
-
-
-
Construction of Granular sub-base by providing HBG material conforming to Grading-ii of MoRTH Table 400-1 including cost, charges and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavatopr/approved means at OMC and compacting with 8 to 10 tonnes roller to achieve the desired density etc., complete for finished item of work as per MoRTH Specification 401(5th revision and as directed by Engineer-in- Charge. Note: ( Payment will be made based on levels for finished item of work).Stone Shall be used from the site.
50
-
-
Providing over RCC flooring, grade slab when concrete is in green condition, finishing top with hard finishing coat using metallic floor hardener Sikafloor®-1 MetalTop or any other equivalent from M/s. Fosroc, STP, Demach, Huntsman, Pedilite, Sunanda Chemicals, Agro Chemicals, MBT of approved quality and make at spread rate of 7Kg/Sqm or as specified by manufacturer for heavy duty floor finish including spreading after vacuum dewatering, ramming, consolidation, finishing smooth using power trowel to required levels or slope as specified, curing, etc., complete as specified and directed with vacuum dewatering.
1450
-
-
Vacuum dewatering of concrete using vacuum dewater technique for evaporation by way of removing the excess water using rigid or flexible suction mat incorporation filler layers and vacuum filler layers and vacuum generator (80 to 90% vacuum is to be applied at the rate of 3 to 5 minutes per 25 mm of depth), finishing with power trowel to get smooth finish all as per specifications, drawings and directions of the Engineer-in-charge for grade slab.
1450
-
-
Providing & fixing 250 micron LDPE film conforming to IS 2508 (1984) including overlap of LDPE sheet wherever necessary shall be at least 300mm and any damaged sheeting shall be replaced at Contractor’s expense complete as specified and directed
1450
-
-
Providing and laying at all floors and levels 6mm (min) thick first quality glossy/ matt / antiskid/rustic / digital collection etc. ceramic tile flooring as per the approved pattern and colour as mentioned below conforming to IS 15622 latest of edition from approved list of maufacturers or equilvalent laid in cement mortar bedding / backing, close jointed and grouted with matching cement slurry to match the colour of the tiles, finished to level, line, slope and plumb including cutting of tiles, making openings/cutout if necessary, wastage and final cleaning of surfaces as required, curing etc.complete all as per drawing specifications & as directed by Engineer in charge.
a) In flooring with rustic/matt finished/ 300x300mm, 600 x 600mm or equivalent approved sizes of ceramic tile laid over 20mm thick cement mortar bedding 1:4 ( 1 cement : 4 sand)
b) In skirting laid over 12 mm thick CM 1:3 backing. c) Anti skid ceramic tile with 300x300 or equivalent approved sizes of ceramic tile laid over 20/15mm thick cement mortar bedding 1:4. In dado / clading with tile of size 200x300mm or size as per working drawing laid over 12 mm thick CM 1:3 backing for toilets.
d) Sand shall be crushed stone sand.
e) Tiles shall be of make Kajaria/Regency/Somani/Jhonson & Jhonson
Note: i) Quoted rate shall include extra cement mortar required to match the water proofing plaster if any to maintain the lines and plumb of dado.
ii) The quoted rate shall include border / combination of tiles as instructed by the Engineer in Charge
iii)The sizes of tiles mentioned are approximate and subject to the availability in market during execution. If the required size is not available the next higher size of tiles shall be used without any extra cost to the Department. The tenderer may note the same and quote accordingly.
-
-
-
Anti skid ceramic tile with 300x300 or equivalent approved sizes of ceramic tile laid over 20/15mm thick cement mortar bedding 1:4. for toilets
150
-
-
In dado / clading with tile of size 200x300mm or size as per working drawing laid over 12 mm thick CM 1:3 backing for toilets.
250
-
-
Providing and laying double charged vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make like Kajaria/Regency/Somani/Jhonson & Jhonson , in all colours and shades, laid cement mortar , jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete for entrance foyer, corridors, lobbies, etc.
Note: i) Quoted rate shall include extra cement mortar required to match the water proofing plaster if any to maintain the lines and plumb of dado.
ii) The quoted rate shall include border / combination of tiles as instructed by the Engineer in Charge
iii)The sizes of tiles mentioned are approximate and subject to the availability in market during execution. If the required size is not available the next higher size of tiles shall be used without any extra cost to the Department. The tenderer may note the same and quote accordingly.
-
-
-
In flooring with rustic/matt finished/ 800X800 mm or equivalent approved sizes of double charged vitrified tile of make Somany/Kajari or approved equivalent laid over 20mm thick cement mortar bedding 1:4 ( 1 cement : 4 sand)
200
-
-
In skirting laid over 12 mm thick CM 1:3 backing.
25
-
-
Cement concrete flooring IPS 40 mm thick 1:2:4 (1 cement : 2 coarse crushed stone sand : 4 graded stone aggregate) with 10mm thick nominal stone aggregate finished with a floating coat of neat cement, including cement slurry, including the cost of nosing of steps etc. complete.
400
-
-
Provdidng 18mm thick Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse crushed stone sand), finished with a floating coat of neat cement complete as specified and directed
25
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Kota stone for floor/treads/ risers /steps / dado ramps of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse crushed stone sand)/ 12 mm thick, 1:3 (1 cement : 3 coarse crushed stone sand) cement mortar for risers joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels for stair case & counter wash basin etc. including cost of nosing and grooves for antislippery measure complete as specified and directed
50
-
-
Providing and fixing 25 mm thick Kota stone slab flooring including treads and landings of staircase etc. over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : (1 cement : 4 coarse crushed stone sand)/ joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish , etc. complete at all levels including cost of nosing and grooves for antislippery measure complete as specified and directed
150
-
-
Providing and fixing 20 mm thick Kota stone slab flooring in risers of steps, skirting, dado and pillars over 12 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing ,with base of cement mortar 1 : 3 (1 cement : 3 coarse sand) / joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels including cost of nosing and grooves for antislippery measure complete as specified and directed
100
-
-
Providing and fixing acid resistant/corrosion resistant tiles to existing RCC members/masonry walls with acid resistant tiles conforming to IS- 4457 Latest Edition, to resist corrosive action of nitric acid of 10 to 12% concentration, caustic lye 40% and organic solvents including preparation of the surfaces by roughening and cleaning, applying 2(two) coats of bituminous primer conforming to IS- 9862 latest revision, providing 6mm thick acid proof bituminous mastic conforming to IS- 9510 latest edition over the dried primed surface, 20 mm potassium silicate mortar conforming to IS- 4832 Part-1 Latest edition, Curing the joints with 20 to 25 % Hydrochloric acid and pointing the joints with carbon filled sulphur cement conforming to IS - 4832 Part-3 Latest Edition etc., as per specifications including manufacturers' specifications to suit the requirement.
-
-
-
In flooring on a bed of not less than 20 mm thick
100
-
-
In dado/skirting on not less than 12 mm thick
250
-
-
Providing/fixing flexible Heavy duty PVC flooring and skirting using 2 mm thick PVC rolls conforming to IS 3462, manufactured by M/s. Premier / Armstrong / Royal house of approved shade. The pattern & design, repairing & leveling the patches of existing floor with any approved filler including fixing the new rolls to different types of floors with Fevicol SR 998 or equivalent approved synthetic adhesive as per manufacturer's specifications including cutting of rolls to required shape and size, Rolling with 20kg roller, providing V-groove and welding all joints using approved vinyl electrodes conforming to IS 8004, smoothening and cutting the welded beads, rolling over joints if required, in line, level including cost of all materials and labour etc., complete as directed by the Engineer-in-Charge.
175
-
-
Providing and applying 3mm thick epoxy self-smoothening flooring on concrete surface having moisture content less than 5 %. Carry out surface preparation including grinding of concrete surface, proper cleaning, removing of loose mortar, paint residuals, curing compound residues, repairing of floor cracks and dents using epoxy putty, mixing and laying of Nitoflor EU5-High Strength self-smoothening epoxy underlay at 2mm DFT (supplied in 15 Ltr pack having compressive strength – 60 Mpa, Tensile Strength-15 Mpa, Flexural Strength-25 Mpa, Mixed Density-1.8-1.85 g/cc, Water Absorption-Nil), spread at uniform thickness using notched trowel, rolling the same using spiked roller, allow the same to cure for 18 hrs followed by mixing all components of Nitoflor SL 1000 - Flow applied 1.0-1.5 mm thick epoxy resin based floor topping (supplied in 15 Ltr pack having compressive strength – 50 Mpa, Tensile Strength-12 Mpa, Flexural Strength-25 Mpa, Mixed Density-1.7 g/cc, Shore D Hardness- 75, Adhesion Strength- 1.5 Mpa) using slow speed drill and poured on prepared screed surface for 1 mm DFT. Now level the material using serrated trowel and roll the same with spiked nylon roller to remove slight trowel marks and entrapped air from the material etc. complete including all tools and tackles as per manufacturer's specification.
850
-
-
X. Roofing
-
-
-
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm of aerolite make or approved equivalent in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.
300
-
-
Supply & fixing Polyisocyanurate foam (PIR) slabs of size 1000 x 500mm and thickness of 30mm (covered on one side with glass fibre tissue/ Aluminium foil having 50mm overlap) conforming to IS:12436 having density not less than 32 kg./ Cu. M., thermal conductivity (K- value) not more than 0.023 w/mk measured at 10 deg. C; classified as 'Class I' for surface spread of flame as per BS 476, part 7; fixed to R.C.C. slab by hot blow grade bitumen of 85/25 grade or cold adhesive CPRX applied over a coat of bituminous primer @ 0.5 Litres/ Sq.m.. applied to bare R.C.C. surface and to the two surface of each PIR panel and pressed in position (while the bitumen is still tacky) with the help of G.I. screws (No. 8 x 75mm long) fixed into rawl plugs (holes in R.C.C. for the rawl plugs shall be drilled prior to applying coat of bituminous primer) of size 8 x 25mm inserted (5 nos. for each slab- One each at 4 corners and one at center) and G.I washers 25mm dia; including covering the overlaps with approved quality sealing compound (MAS-94 or equivalent); chicken wire mesh 24G x 19mm shall then be fixed to G.I screws and tightened with lacing wire; including preparation of surface consisting of cleaning R.C.C surface of all dust, dirt and loose particles by wire brushing; etc. all complete as per approved manufacturer's standard specifications and recommendations.
150
-
-
XI. MISCELLANEOUS ITEMS :
-
-
-
Providing grouting (including tamping) for foundations, structures, equipments, base plates, anchor holes, etc., with non-shrink, free flow grout of shrinkhomp-30N/Sqmm of M/S A.C.C, Fosroc or equivalent mixed with filler like sand in 1:1, including shuttering wherever necessary at and at all depths and heights below and above plinth level complete as specified and directed. note: Weight of grout used in the work will be measured for payment. However, the rate quoted shall inclusive of all materials.
5
-
-
Providing and fixing SS railing made out of commercial chromium steel tubes SS 304, of various diameters, of approved make, 2 mm wall thickness, pattern as shown in drawing/as directed including supplying or fabricating, fittings like SS bends, tees, etc., welding the pipes using TIG welding or any other approved method, grinding/buffing the welded joints smooth, erecting the railing in position in line, level and plumb, fixing tailing in position by grouting/or any approved system, cleaning, polishing the joints if required, scaffolding etc., complete all as specified and directed.
1000
-
-
Providing and fixing 160 mm n.b.un-plasticised PVC rain water pipes with necessary PVC clamps and wooden gutties of approved make conforming to IS: 13592 type ‘A’with injection moulded fittings jointing with approved synthetic adhesive seal rings conforming to IS: 5382 embedding the slab junctions leakproof testing complete in line, level and plumb all as directed.
500
-
-
GI pipe hand rail made out of 32 mm /25 mm nominal bore GI pipes (Jindal, Tata or equivalent) of medium quality conforming to IS 1239, 32 mm n.b. as top fabricated horizontal and vertical members and 25 mm nominal bore as middle and /bottom horizontal members at and at all heights above plinth level, cut to size and shape including necessary bends, tees or with welding as required and fixed in position by grouting or by welding to insert plates provided etc., complete, painting with a coat of approved primer comparable to receive polyurethane paint, etc., complete as specified and directed.
1500
-
-
Supplying, lowering, laying, mentioned below the nominal bore, RCC SPUN PIPES (Class NP2) /NP 4 conforming to IS:458 with necessary collars, laid to correct grade and levels at and at all depths below plinth level including cutting to lengths, jointing with hemp yarn and cement mortar 1:1, caulking the joints and finishing, curing, etc., complete as specified and directed.
-
-
-
(a). 150mm NB NP-2
10
-
-
(b). 300mm NB NP-2
10
-
-
(c). 600mm NB NP-4
10
-
-
XII DOORS, WINDOWS & ROLLING SHUTTERS ETC :
-
-
-
Supplying and fixing in position approved motor automatic operated (push & pull) steel rolling shutters made from M.S. lathes of not less than 1.25 mm thick including supplying and fixing all necessary fixtures, fittings, top hood, guide channels, shutter suspension shaft not less than 6", ceiling strips providing approved quality of ball bearings, locking arrangements, handles, lugs, cutting, drilling necessary holes in concrete, grouting lugs with cement concrete 1:2:4, including providing and fixing not less than 1.0HP motor of Crompton Greaves, L&T or any approved equivalent along with other accessories for On and Off, level switch connected operatable, applying one shop coat of approved Zinc chromate primer and two coats of synthetic enamel paint complete as shown in the drawing and as directed (measurement for rolling shutters will be as per the structural openings, hoods shall not be measured separately).
150
-
-
Providing and fixing pressed steel door frames and shutters , of PROFILE - B conforming to IS: 4351, with Frame GI 1.20 mm , Shutter : GI 0.80 mm thick . Frame profile - 100 x 57 mm including ball bearing butt hinge ( SS304 grade), of size 100x75x3 mm with screws, Motrise sash lock (H9-GU-BKS 2160, 65 BS/72/9 mm) , Euro profile 5 pin cylinder 5702, 70mm key , lever handle LT 001, 19 dia with roses & escutcheon (SS304) including painting with one coat of zinc primer and two coats of synthetic enamel paint and as directed by Engineer -in-charge..
10
-
-
Supplying and fixing in position at all floors integrated bronze anodised matt finished [15 micron thick], aluminium section [extruded] for aluminium Doors / windows (sliding/movable) /ventilators/ top hung/ fixed / grill/ adjustable louvered/ windows/ fixed partitions/ beading for fixing SS fly proof jali as per drawing of approved manufactures with extruded sections of Jindal / Indal / Aluminax or other approved eqivalent sections with size and weights as shown in the drawing, for frames and shutters [including wastages if any] conforming to relevant I.S specifications with all approved Bronze anodised aluminium fittings and accessories, locking arrangements, 2 / 3 rollers with ball bearings for sliding shutters of approved quality all as shown in the drawing, including providing and fixing aluminium channel beading / glazing clips fixed with necessary bronze anodised screws, grouting the gap with thermocole & GE sealant etc. all complete generally as per drawings, specifications etc., all as directed by Engineer in charge. but excluding the cost of glazing, which will be paid separately. NOTE: Approval of the Dept. for the complete design and shop drawing shall be obtained before commencement of the work.
2320
-
-
Providing and fixing glazing with 4 mm thick plain float glass (weight not
less than 10 kg/ sqm) of approved quality (Atul, Modiguard, Triveni, Hindustan Pilkington) including PVC/EPDM lining as per the drawing and as directed for window shutters and ventilators.
470
-
-
Providing and fixing glazing with 5 mm thick plain float glass (weight not
less than 12.50 kg/ sqm) of approved quality (Atul, Modiguard, Triveni, Hindustan Pilkington) including PVC /EPDM lining as per the drawing and as directed for doors & partitions.
210
-
-
Providing wood work with CP teakwood in frames for doors using II class teakwood at all heights with all around architraves above plinth level and fixed in position including providing and fixing with suitable size of coach screws wherever required / M.S. hold fasts of size 40 mm x 3 mm and 200 mm long, bent to shape embedded in cement concrete 1:2:4 blocks for door frames, fixed in position with necessary lugs rawl plugs and screws and coach screws, applying one coat of approved wood primer to the exposed surfaces of door frame and two coats of bituminous paint to the surfaces of frames in contact with masonry/concrete, etc., complete as indicated in drawings and as directed.
-
-
-
II class teakwood frame
1
-
-
Providing and fixing in position double/single leaf flush door shutters of solid block board core, 35 mm thick including ISI marked stainless steel butt hinges, at all heights above plinth level internally lipped with second class teakwood, 25 mm deep along all edges of shutters bounded with water-proof type phenol formaldehyde synthetic resin, hot pressed, Chemicaly treated and with commercial ply finish on both faces providing and fixing under pressure with approved type adhesive including providing and fixing 2nd class teak wood rebate at meeting junction of shutters in case of double door shutters, fixing hinges supplied under relevant item to shutter and frame and complete generally as shown in drawings and as specified and directed for single door shutter / double door shutters.
-
-
-
Single/Double leaf flush door shutter with teakwwod veener not less than 0.8mm on both sides and with three coats of melamine polish of approved tint & shade over French polish including preparing the surface to get the desired finish (Polish with melamine will be paid under relevant item)
25
-
-
Providing and fixing factory made single extruded WPC ( Wood polymer Composite ) solid door/window/ceosetory windows & other FRAMES / CHOWKHAT comprising of virgin PVC polymer of K value 58-60 ( Suspension Grade ), calcium carbonate and natural fibers ( wood powder / rice husk / wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement screwed with full body threaded star headed SS screws having minimum frame density of 750kg/cum , screw withdrawal strength of 2200N (Face ) & 1100 N ( Edge ) , Modulus of Elasticity 900 N/mm2 and resistance to spread of flame of Class A Category with property of being termite/borer proof, water / moisture proof and fire retardent and fixed in position with M.S hold fast / lugs / SS dash fastners of required dia and length complete as per direction of Engineer in Charge
11
-
-
Providing and fixing factory made single extruded wpc ( Wood polymer Composite ) solid decorative type flush door shutter 30 MM thick nd natural fibers ( wood powder / rice husk / wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) having minimum frame density of 650kg/cum , screw withdrawal strength of 1800N (Face ) & 900 N ( Edge ) , Minimum compressive strength of 2200 N ( Face ) & 1100 N ( Edge ) , Modulus of Elasticity 900 N/mm2 and resistance to spread of flame of Class A Category with property of being termite/borer proof, water / moisture proof and fire retardent. WPC is to be laminated with pvc foil of minimum 14 microns , thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with neccessary full body threaded star headed counter sunk S.S Screws, including all hardware like aldrops, handles , tower bolts etc. complete as per direction of engineer in Charge.
35
-
-
Supplying and fixing to wooden doors at and at all heights above plinth level approved 6/4 lever mortice latch and locks of Godrej /Everite make or approved equivalent make comprising brass body and all parts including sticking plates made of brass, stainless steel keys in duplicate, a pair of mortice lock handles of approved pattern of Godrej make or its approved equivalent make with approved cadmium plated brass screws of appropriate size etc., complete as directed to suit single/double shutters.
10
-
-
Supplying and fixing to doors at and at all heights above plinth level approved best quality anodized extruded aluminium hanging floor door stopper (twin rubber stopper) with rubber cushion (anodic coating not less than grade AC 10 as per IS 1868))transparent or dyed to required colour and shade, with necessary screws etc., complete for twin rubber stopper.
13
-
-
Supplying and fixing to wooden doors etc. and at all heights above plinth level approved anodized extruded aluminium tower bolts conforming to relevant IS specifications (‘Classic’ or its approved equivalent) with approved cadmium plated brass screws of appropriate size etc., complete as directed.
-
-
-
a) using 250 mm long, 10 mm shoot.
25
-
-
b) using 150 mm long, 10 mm shoot.
10
-
-
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers for aluminium doors and a pair of lever handles of approved quality with necessary screws with ISI marking classic/ J.S.E. (ECIE) make or any approved equivalent complete as directed by EIC
4
-
-
Supplying and fixing to wooden doors at all heights above plinth level approved anodized extruded aluminium handles with round grip and face plate conforming to relevant IS specifications and with ISI marking ‘Classic’/JYOTHI or approved equivalent and of size 125 mm (grip) with approved cadmium plated screws of appropriate size etc., complete as directed.
20
-
-
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate with stainless steel cover plate minimum 1.25 mm thickness etc. complete as per the direction of Engineer-in-charge.
4
-
-
Supplying only approved anodized extruded aluminium heavy quality butt hinges with S.S. pin generally conforming to IS specifications CLASSIC, JYOTHI make or approved equivalent make) of size 125 x 63 x 4 mm with cadmium plated wood screws of appropriate size etc., complete as directed.
39
-
-
Supplying and fixing at and at all heights above plinth level hydraulic door closures of ‘EVERITE’/Godrej make or approved equivalent confirming to IS 3564 with all fixtures, fittings and approved screws of appropriate size etc., complete as directed.
10
-
-
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, with decorative lamination on both sides in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge.
25
-
-
Supplying and Fixing in position Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood/aluminium beading as specified and directed complete for change rooms
65
-
-
GLASS DOOR/PARTITION- Providing and fixing glass door/partition of 12mm thick of SAINT GOBAIN/ MODIGUARD clear toughened glass supported on OZONE/ DORMA approved patches as per the manufacturer's specifications including smothening/ grinding of the edges, filling the joints between glass clear sealant of GE or anyapproved make , lock, fixing glass Foster Stikering for glass door except floor spring etc. complete as directed by EIC. (area of door to be measured for payment)
50
-
-
Providing and fixing of UPVC fixed louvers with Deltra/Lesso make upvc profiles. The outer frame should be 60 X 48mm in size and the upvc louvers (Z shaped) should be of 40-45mm in width and 10mm in thickness. The gaps between louvers should be around 30mm. The angle of inclination of louvers with horizontal plane should be 45 degrees.There should be a provision at the bottom of the UPVC frame for disposal of rain water. The louver should be pre fabricated at the factory and installed at the site and sealed properly with silicone. The upvc frames should be reinforced with 1.00 -1.50mm GI steel. The louver frame should be fized to the existing structural frame/RCC/brickwork or louver opening by using stailnless steel screws. Good quality hardware should be used, complere and as directed by Engineer-in-charge.Note: Regardless of the dimensions given above, the design approved by EIC at the time of execution would be binding.
150
-
-
XIII. INTERNAL WATER SUPPLY:
-
-
-
Supplying, laying and fixing CPVC pipes confirming to ASTM D2846, SDR -13.5 at a working pressure of 320 PSI at 23 deg C, complete with all fittings and clamps, Fittings (Conforming to relevant IS/ASTM/BS code), in trenches, floors, walls including embedding if necessary, joining of pipes and fittings shall be done by solvent cement conforming to ASTM F-493, including bends, elbows, tees, reducers, sockets, unions and other specials, supplying and fixing with hooks in wooden plugs or embedding in walls and floors, cutting pipes to required lengths, making connections, cutting chases or holes in walls with machine & making good the same, testing, etc. all complete as per drawings, specifications and directions of Engineer-in-Charge. (CPVC pipes shall meet National Sanitation Foundation
(NSF) requirement for drinking water system)
-
-
-
For the following Nominal Bore (NB) pipe: 15 mm
100
-
-
For the following Nominal Bore (NB) pipe: 20 mm
150
-
-
For the following Nominal Bore (NB) pipe: 25 mm
100
-
-
For the following Nominal Bore (NB) pipe: 40 mm
100
-
-
For the following Nominal Bore (NB) pipe: 50 mm
250
-
-
Providing and fixing in position heavy pattern screw down Gun metal ball valve with ball SS confirming to IS.778 with hand lever at top including testing for 10 kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc. as per specification.
-
-
-
a) 20mm nb for coolers
10
-
-
b) 25 mm n.b.
20
-
-
c) 40 mm n.b.
10
-
-
d) 50 mm n.b.
10
-
-
Providing hoisting and installing at required elevation minimum three layered moulded HDPE cylindrical vertical water storage tanks of various capacities of Sintex or Duracon make, with suitable SMC cover at top, coated with UV coating/layer including the cost of labour for making hole in the storage tank for inlet, outlet, scour and overflow and the required fittings/ gaskets, float valve including making necessary supporting system complete as directed
10000
-
-
XIV. EXTERNAL/INTERNAL SEWERAGE:
-
-
-
Providing and fixing uPVC pipes of Ring Stiffness SN 8 & relevant fittings for underground drainage and sewer system of catgeory Type B and conforming to IS 16098 Part-1 , for all depths, correct grade, levels and alignment of following sizes and make M/s Ashirvad/Supreme or equivalent ,jointing with solvent weld or pushfit type for the external drainage system as per manufacturer specifications and encasing the pipe with 1:3:6 cement concrete. etc. and as specified and directed. Note :- The plain cement concrete will pe paid under relevant item
-
-
-
110 mm dia
150
-
-
160 mm dia
350
-
-
Providing laying or fixing in position under floors or against walls centrifugally CAST (SPUN) IRON SOCKET AND SPIGOT SOIL, WASTE, VENTILATION PIPES and fittings like bends, offsets, tees tappers, collars, connectors, plugs, shoes, etc. conforming to IS:3989, including cost of all fittings, jointing materials, joining with tarred spun (Jute) yarn and molten pig lead caulking the joints, including testing, painting with two coats of approved paint over a coat of primer etc. complete.
-
-
-
a) 75 mm n.b. pipes (with 1.8 kg of lead per joint)
100
-
-
b) 100 mm n.b. pipes (with 2.2 kg of lead per joint)
100
-
-
Providing and fixing in position best salt glazed STONE-WARE GULLY TRAP 150x150 mm square inlet and 100 mm n.b. outlet conforming to IS:651 including embedding the trap in 1:4:8 cement concrete.150mm x 150 mm C.I. grating at top, construction of brick masonry chamber 300 mm x 300 mm(internal) in 230 mm thick brick masonry in CM 1:6 over cement concrete of 150 mm thick bed of 1:4:8 embedding the trap, plastering with cement mortar 1:4, 20 mm thick on inside, outside and all exposed faces finished with a floating coat of neat cement, providing and fixing C.I. frame and cover weighing not less than 7 kgs, painting the grating, frame and cover with 2 coats of approved bitumastic paint etc. complete.
10
-
-
Construction of rectangular CHAMBERS of internal clear dimension of mentioned below ( internal clear) in 230 mm thick brick masonry in cement mortar 1:6 over a bed of 150 mm thick 1:4:8 cement concrete in foundation, plastering with cement mortar 1:4, 20 mm thick on inside, and all outside exposed surfaces finished with a floating coat of neat cement, 1:2:4 cement concrete for benching in slope 1 in 30 and channel finished with neat cement, brick corbelling at top if necessary to provide clear opening and providing and fixing CI cover with frame of light duty single seal pattern weight not less than 33 kgs embedded in cement concrete 1:2:4, providing and fixing C.I. steps weighing not less than 3 ½ kg each at 300 mm centre to centre if depth exceeds 800 mm, painting CI cover and frame and CI steps with two coats of bitumastic paint etc. complete-For depth of chamber not exceeding 900 mm. However minimum depth of chamber not less than 450mm
-
-
-
a) 450x600mm
8
-
-
b) 600x900mm
8
-
-
Extra over above item for depths beyond 900 mm of Rectangular chamber including providing and fixing C.I. steps weighing not less than 3 ½ kg each @ 300 mm C/C, staggered vertically and horizontally etc., as per specifications.
-
-
-
a) 450x600mm
8
-
-
b) 600x900mm
8
-
-
Supplying and dry filling of aggregate of granite stone metal/chips including screening, depositing neatly in layers in Rain Water harvesting pits/Reverse filter bed.
-
-
-
(a) Stone clips 50 mm
5
-
-
(b) Stone clips 6 mm
5
-
-
(c) Coarse sand
5
-
-
Providing orange colour safety foot rest of minimum 6 mm thick plastic
encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) complete as per design.
50
-
-
XV. MISCELLANEOUS SANITARY ITEMS :
-
-
-
Providing and fixing approved ORRISA PATTERN W.C. SUITE of M/s. Hindware or jaguar make comprising
a) Orissa patterns W.C. best Indian make in light coloured glazed vitreous chinaware, 580 mmx400 mm with ‘P’ or ‘S’ trap.
b) PVC low level flushing cistern of 10 lts. Capacity conforming to IS:7231 with all internal PVC fittings mounted on a pair of CI brackets of heavy quality with 32 mm nb PVC bend of required length complete.
c) 32 mm nb PVC flush pipe of appropriate length with all fittings synthetic adhesive cement jointed concealed in wall.
d) 15 mm n.b. heavy quality PVC inlet connection with CP brass unious at ends
e) 15 mm n.b. heavy quality G.I. pipe and specials for overflow from cistern upto 150 mm above floor level concealed in wall and terminated with 15 mm n.b. CP brass mosquito proof jalli etc. complete
f) 15 mm n.b. screw down heavy quality C.P. bras stopcock conforming to IS: 781.
g) 15 mm n.b. heavy quality GI overflow pipe with specials from cistern
1
-
-
Providing and fixing EUROPEAN WATER CLOSET suite comprising Hind ware or jaguar :
a) WASH DOWN PATTERN European water closet best Indian make, in light colour glazed vitreous, with integral ‘P’ or ‘S’ trap.
b) Plastic low level flushing cistern of gleaming light colour shade, best quality, champion or approved equivalent, conforming to IS:7231 complete with all internal fittings, matching heavy quality PVC flush bend mounted on a pair of white enamel painted brackets.
c) 15 mm n.b. heavy quality PVC inlet of heavy quality connection with CP brass unions connected at ends.
d) 15 mm n.b. screw down variety heavy quality C.P. brass stop cock conforming to IS:781.
e) Solid plastic heavy quality seat with lid of approved make and colour with C.P. brass pillar hinges, conforming to IS:2548 (Part I&II).
f) 15 mm n.b. heavy quality GI overflow pipe with specials from cistern to 150 mm above floor level painted and terminated with mosquito-proof perforated cap.
2
-
-
Providing and fixing wash basinsize 630X450mm of M/s. Hindware/jaguar or approved equivalent of with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, 15 mm n.b. screw down heavy quality C.P. bras stopcock conforming to IS: 781., 32 mm CP brass bottle trap, with extension pieceincluding painting of fittings and brackets, cutting and making good the walls wherever required complete as specified and directed
3
-
-
Providing and fixing as per IS 2556 flat back half stall urinal of size 580x380x350 mm of M/s. Hindware or Jaguar make supporting the pan on suitable heavy quality CI wall brackets, 32 mm n.b. heavy quality, approved make CP brass bottle trap with extension piece, fixing with CP brass spreader and suitable heavy quality CP brass waste coupling to urinal basin, CP brass grating, spring based flush valve for operation of water flushing etc., complete as specified and directed.
4
-
-
Providing and fixing SS liquid soap dish/ container ofHindware or Jaguar in with CP brass brackets, cap etc., fixed to wall with CP brass screws, screwed on to wooden rawl plugs etc., complete as directed for all wash basins.
4
-
-
Providing and fixing in position bevelled plain edged mirror 600 x 450mm made out of best Indian glass of 6 mm thick of approved manufacturer, mounted on plywood sheet/ plain AC sheet of 6 mm thick fixed in position with four number of CP brass screws with detachable CP brass caps, washers, rawl plugs, etc., complete for size given below.
4
-
-
Providing and fixing C.P. brass TOWEL RODS of approved equivalent of size 600 mm x 20 mm with a pair of C.P. brass brackets, wall flanges etc., of Hinware or jaguar make fixed to wall with C.P. brass screws, screwed on to rawl plugs etc., complete.
4
-
-
Providing and fixing 150mmx150mm recessed type Toilet Paper Roll Holder of M/s. Jaguar or Hindware make in Brass including cutting into wall making good the same complete.
2
-
-
Providing and fixing cast iron "P" trap with 100 mm outlet, cadmium plated brass dome grating, necessary 1:2:4 cement concrete for embedding the trap, finishing interor portion of floor opening with cement plaster in CM 1:4 with floating coat of neat cement, etc., complete as directed for Urinals.
4
-
-
Providing and fixing CI NAHANI TRAP of self cleaning design of deep seal of over all depth of 150 mm and weight not less than 5.75 kgs with 75 mm outlet, having a minimum water seal of 50 mm with grating on top including necessary 1:2:4 cement concrete for embedding the trap, finishing interior portion of floor opening with cement plaster with float coat in CM 1:4 etc., complete with CP brass grating.
10
-
-
Providing and fixing CP brass wall mixer of 15 mm nb with a provision of cold and hot water taps and a mixing valve for connection to shower rose, of deluxe pattern of Jaguar make or equivalent conforming to IS 1701 complete as directed.
2
-
-
Providing and fixing best quality colour glazed Stainless steel Soap dish, recessed type of Jaquar Cat. No. AHS -1531.
2
-
-
Providing and fixing health faucet of size 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. Of quality and make as approved by Engineer - in - charge.
2
-
-
Providing and fixing decorative round shaped CP brass Shower rosewith 15 or 20mm inlet of 150mm dia, of easy and clean design on GI lines with built in ball joint for directional change etc complete as directed.
2
-
-
Providing and fixing heavy quality fancy variety C.P. brass screw down CONCEALED TYPE STOP COCKS of Jaguar/ M/s. Bilmat/GEM/ ESSCO/Metro or approved equivalent make conforming to IS:8931 on G.I. lines of size 15 mm for shower.
5
-
-
Providing and fixing heavy quality fancy variety C.P. brass screw down BIB TAPS/Push Tap/Two Way Bib Tap of M/S. Jaguar/Hindware make conforming to IS: 8931 on G.I. lines- size 15 mm.
10
-
-
Providing and fixing approved type CP brass coat and hat hooks 2 Nos. (one unit) of approved pattern & shape fixed to wall/door shutter with suitable screws and plugs as required all as directed and specified.
4
-
-
XVI. WATERPROOFING :
-
-
-
Water proof plaster in cement mortar 1:3 ,with waterproofing compound make of ( M/s Fosroc , MBT, Sika, Sunanad aChemicals etc.) @ 2% by weight of cement including scaffolding, curing, hacking of concrete surfaces etc. Complete a) 15 MM thk for underground pits/drains etc.
280
-
-
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of cement slurry
using 2.75 kg/ sqm of cement admixed with water proofing compound
conforming to IS : 2645 and approved by Engineer-in-charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4
(1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
NOTE :- 1)The treatment shall be tested by ponding water for a period of 10 days. If due to location of rain water pipes the average thickness of treatment exceeds 110 mm for easy flow of water the extra brickbat coba will be paid as extra item and the rate for the same to be got approved from the Department before execution 2) The waterproofing treatment is to be guaranteed for bone-dry condition for a period of 10 years in the prescribed proforma. 3) The measurement for payment shall be the entire area of terrace covered by the treatment measured between brick/concrete parapets without plaster and the area of vatas calculated by taking the length of vatas and the height above the finished level of the terrace.
1485
-
-
Providing and laying integral cement based treatment for water proofing (BOX TYPE WATERPRROFING) on horizontal surface at all depth below ground level for under ground structures using rough shabahd stone as directed by Engineer-in-Charge and consisting of :
(i) 1:2:4 PCC 100 MM Thick
(i) Ist layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the
recommended proportion over the leveling course . Joints sealed and grouted with cement slurry mixed with water proofing compound.
(ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions.
(iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer.
25
-
-
Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge :
50
-
-
Providing and Placing in position suitable PVC water stops , Serrated with central bulb (225 mm wide, 8-11 mm thick), conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete as specified and directed
100
-
-
Providing and fixing of approved quality heat resistant terrace tiles of size 300x300x20mm with SRI78 on a pre-waterproofed and finished surface of terrace in 20mm thick cool mortar proportionately mixed with white cement and water in ratio as per approved manufacturer's specifications and grouting with white marble powder in the ratio 1:1 / any other specified waterproof tile grout and polishing complete surface upto 3 cuts with skirting of 150mm of tile provided along the parapet walls, all complete.
1485
-
-
XVII. ELECTRICAL
Note: Pre Dispatch inspection & testing of following items is envisaged at manufacturer's work. The waiver for pre dispatch inspection, due to any reason, shall be at discretion of Competent authority.
1.Distribution boards 2.Wires
3.Lighting Luminaries
4.Ceiling Fan
5.Cat-6 cables
-
-
-
PART A: DISTRIBUTION BOARDS
-
-
-
DISTRIBUTION BOARDS Supply, installation, testing & commissioning of following readymade distribution boards, double door, IP 42 degree protection complete with necessary, MCBs, earth leakage circuit breaker (ELCB), MCCB, wireway box etc. & all as per drawings (G.A. & fabrication drawing to be got approved) and specifications relevant IS & instruction of Engineer-in-charge.
-
-
-
8 WayPPI (Seven segment)DB with following
1)63A, Four pole(FP), MCB
2) 63A, 30mA, DP RCCB -3 No. 2) 6A to 25A SP MCB – 24 nos. 3) 8 way brass neutral link -- 3 set 4) 8 way brass earth link -- 3 set Note: The circuit wiring in DB shall be as shown in drg.
3
-
-
SPN MCB fabricated DB for Out door lighting & housing following,
1) 16A Two pole(DP), 30mA RCBO -1 No. Incomer timer and 12A contactor
2) 6A to 25A SP MCB – 8 nos. 3) 8 way brass neutral link -- 2 set 4) 8 way brass earth link -- 2 set Note: The circuit wiring in DB shall be as shown in drg.
1
-
-
PART B: POINT WIRING AND SUBMAIN WIRING Point wiring in MS conduits : Point wiring for following points with 1.1 KV grade FRLS PVC insulated multistranded copper conductor wire, MS conduits of 25 to 40 mm dia, switches sockets, metallic modular boxes, termination, cover plates etc as per specifications and drawings and as per instructions of E-I-C and as detailed below
-
-
-
Primary Switch Box for High bay/Out door lighting DB point
3 No. 4 sqmm wires(P, N & E) from DB to the Lighting switch board and to additional switches/sockets looping, if any in the same box in same circuit point.
8
-
-
Primary Switch Box point 3 No. 2.5 sqmm wires(P, N & E) from DB to the Lighting switch board and to additional switches/sockets looping, if any in the same box in same circuit point.
12
-
-
Secondary Switch Box point 3 No. 2.5 sqmm wires(P, N & E) from a switchbox to the Lighting switch board and to additional switches/sockets looping, if any in the same box in same circuit point.
2
-
-
Primary Light point
2 No. 1.5 sq.mm for P& N & 1 No. 2.5 sqmm for earth wires From Switch box to the light point including 6 A switchwith, ceiling rose or angle/batton holder as per drawing. Note: Neutral wire can be laid from the nearest light/fan point of the same circuit.
23
-
-
Primary Light point for High bay lights
2 No. 2.5 sq.mm for P& N & 1 No. 2.5 sqmm for earth wires From Switch box to the light point including 6 A switchwith, ceiling rose , flexible conduits as per drawing. Note: Neutral wire can be laid from the nearest light/fan point of the same circuit.
23
-
-
Secondary Light point
2 No. 1.5 sq.mm for P& N & 1 No. 2.5 sqmm for earth wires From one light point to another including ceiling rose or angle/batton holder as per drawing. Note: Neutral wire can be laid from the nearest light/fan point of the same circuit.
43
-
-
Secondary Light point for High bay lights 2 No. 2.5 sq.mm for P& N & 1 No. 2.5 sqmm for earth wires From Switch box to the light point including 6 A switchwith, ceiling rose , flexible conduits as per drawing. Note: Neutral wire can be laid from the nearest light/fan point of the same circuit.
60
-
-
Primary street light / outdoor light point
2 No. 1.5 sq.mm for P& N & 1 No. 2.5 sqmm for earth wires From DB to the wall mounted Street light point including required accesories as per drawing. Note: Neutral wire can be laid from the nearest light/fan point of the same circuit.
8
-
-
Secondary street light/ outdoor light point
2 No. 1.5 sq.mm for P& N & 1 No. 2.5 sqmm for earth wires From one light point to another including required accesories as per drawing as per drawing. Note: Neutral wire can be laid from the nearest light/fan point of the same circuit.
8
-
-
Exhaust Fan point
2 No. 1.5 sq.mm for P& N, & 1 No. 2.5 sqmm for earth wire from Switch box to the ex. fan point point along with 6 A switch, 6A Socket(near by Exhaust fan). Note: Neutral wire can be laid from the nearest light/fan point of the same circuit.
2
-
-
Ceiling Fan point 2 No. 1.5 sq.mm for P& N, & 1 No. 2.5 sqmm for earth wire from Switch box to the fan point point along with 6 A switch & 5 step regulator. Note: Neutral wire can be laid from the nearest light/fan point of the same circuit.
5
-
-
Primary Power point 3 No. 2.5 sqmm wires(P, N & E) from DB to the power point along with two Nos 16A switches and 2 Nos 16 A universal socket
23
-
-
Secondary Power point 3 No. 2.5 sqmm wires(P, N & E) from power point to the secondary power point along with 1 No. 16A switches and 1 No16 A universal sockets
17
-
-
AC point 2 No. 4 sq.mm for P& N, & 1 No. 2.5 sqmm for earth wire from DB to the AC point through & including 1 No. 20A DP MCB(10 kA breaking capacity) in metal box(at operating height) to 20 A 3 pin metal clad socket with plug top near to AC.
5
-
-
Geyser point
2 No. 4 sq.mm for P& N, & 1 No. 2.5 sqmm for earth wire from DB to the Geyser point through & including 1 No. 20A DP MCB(10 kA breaking capacity) in metal box out side tiolet(at operating height) to 20 A 3 pin metal clad socket(Industrial type)with top near to Geyser(inside toilet).
1
-
-
PART C: Earthing and LIGHTNING PROTECTION
-
-
-
Supply, installation, testing & commissioning following heavily hot dipped GI earth strip for ground conductors fixed with no.10 GI wood screws & 1-2 mm thick GI saddles with G.I machine screws or in ground at 750mm below, interconnection of earth strip with welded joints and GI nut bolts & washers, painting with two coats of metallic Aluminium paint for above ground portion & painting with two coats of black bituminous compound for earth strip in ground etc. all as per drawing, specifications and as per the instructions of the Engineer-in-charge. Note excavation for this item measured seperately & conductor used as down conductors.
-
-
-
50 X 6 mm GI strip for earth mat and earthing
800
-
-
25 X 6 mm GI strip with insulators for lightning protection
500
-
-
25 X 3 mm GI strip
100
-
-
PART D: TELEPHONE and Network SYSTEM
-
-
-
Telephone Point Wiring: Point wiring with 4 pair CAT-6 wires copper conductor PVC insulated, in 25 mm dia rigid MS conduit (concealed in slab /wall or complete with all conduit accessories, RJ-11 telephone socket outlets with shutter in a box with connector, ferrule numbers on both side of the circuits all terminations with ferrule /lugs if required, modular box at one end, labelling all as per drawing specifications & as per instructions of E-I-C. NOTE: 1. Point wiring means 4 pair CAT-6 wires from Telephone Tag Block to assigned point including end termination of one pair at both sides and other pairs should be kept spare.
8
-
-
Telephone Tag Block (TTB) : Supply, installation, testing & commissioning of following readymade Krone connector telephone tag block box, 18 SWG MS CRCA sheet, concealed/surface mounted on MS frame of size 40 x 40 x 5mm and grouted on the wall/fixed on the column free standing type with anchor fasterners, cable end/wire way box,if required, with adequate space facility to be provided in the TTB, with front operable hinged door, neoprene rubber/cork gasket for joints, wire bunching clamps , name plate etc. all as per standards, specification, drawing & instructions of E.I.C. Note: 1) Point distribution diagram shall put in side the DB with polythene protective cover. 2) All fabrication drawings shall be got approved. 3) Disconnection module shall be Krone Part No. 69011006-02 or equivalent approved.
-
-
-
50 pair telephone tag box :
A set consisting of :
1)Disconnection module 2 /10 --5 nos.
2)Back mounting frame - 2/11 --1 nos
(C.T. box with mounting bracket )
3. Transparent dust cover -- 1 no. complete with all accessories 4. Label Holder - 1 nos.
1
-
-
Network Point Wiring: Point wiring with 2 No.4 pair CAT-6 wires copper conductor PVC insulated, in 25 mm dia rigid MS conduit (concealed in slab /wall or complete with all conduit accessories, including 2 No. RJ-45 Network socket outlets with shutter in a box with connector, ferrule numbers on both side of the circuits all terminations with ferrule /lugs if required, modular box at one end, labelling all as per drawing specifications & as per instructions of E-I-C. NOTE: 1. Point wiring means 2 No. 4 pair CAT-6 wires from Network JB Block to assigned point including end termination at both sides and RJ45(2 No) socket at one end with connector in a box
10
-
-
PART E: MISCELLENEOUS ITEMS
-
-
-
MS Fabrication :
Supply, fabrication and installation of supports using MS channel/angle / flat/ MS rod hangers etc.including painting with two coats of primer and two coats of epoxy paint of approved shade as per instructions of EIC.
200
-
-
Supply, installation of GI pipe of B class sleeves in beams/column/slab for passing electrical cables/conduit as per instruction of E-I-C.
-
-
-
40 mm dia
20
-
-
80 mm dia
20
-
-
Supply, fixing & installation of pre mixed & ready to use M/s. HILTI make firestop foam CP 620 in 300ml bottle for sealing openings in electrical shafts, Telephone shaft, raceways & cutouts, hump pipes & where ever required & as per instruction of EIC.
2
-
-
Supply, fixing & installation of pre mixed & ready to use M/s. HILTI make firestop mortar CP 636 for sealing openings in electrical shafts, Telephone shaft, raceways & cutouts, hume pipes & where ever required & as per instruction of EIC.
4
-
-
PART F: LIGHT, LUMINAIRES, CEILING FANS, ETC.
-
-
-
Light Luminaires & Fittings: Supply, installation, testing & commissioning of following luminaires as per drawing, specifications & as per the instruction of E.I.C.
-
-
-
LED Surface Mounted 1600 Lumen O/P Luminaire Similar to M/s Philips Cat. No. SM200C LED16S-6500CCT OD PSU CIRRUS MINI PRO' or Equivalent Approved
8
-
-
LED Surface Mounted 4000 Lumen O/P Luminaire Similar to M/s Philips Cat. No. BN108C LED40S-6500CCT PSU CDL WH Batten or Equivalent Approved
92
-
-
LED Surface Mounted 2000 Lumen O/P Luminaire Similar to M/s Philips Cat. No. BN308C LED20S-6500CCT L120 PSU WH Batten or Equivalent Approved
16
-
-
LED bracket mounted streetlight fixture IP 66, 7000 lumens system output similar to M/s Philips BRP410 LED CW 072 MR FG SI PSU GR or Equivalent Approved
16
-
-
10W, 1x 2ft LED Tube light fitting + mounting accessories
2
-
-
LED fixture IP 66, 10000 lumens system output similar to M/s Philips BY325P LED100S CW PSU GR FG WB XTFCL V1 or Equivalent Approved along with supporting arrangement
83
-
-
Supply, installation, testing & commissioning of 225 mm dia , casette type of exhaust fans, single phase complete with blades, motor, scope includes supply of 3C copper 1.5 sq.mm. flexible chord of suitable length with louvers and fixing arrangement in window/wall as per instructions of EIC.
5
-
-
Ceiling Fans :
Supply, installation, testing & comissioning of BEE 5 star rated 1200mm sweep ceiling fan as per specification and instructions of E I C
5
-
-
Fan Hook Boxes
Supply, installation, testing of concealed fan hook boxes of size 150 x 150 x 75 mm deep fabricated out of 2mm thick M.S CRCA sheet with 12.5 mm dia M.S tested rod hook with brass earthing stud & welded nut from inside and 2mm thick round M.S cover plate overlapping by 15 mm, including red oxide and two coats of white synthetic enamel paints and brass chromium plated screws and cup washers for fixing and all as per conceptional drawing enclosed & instruction of Engineer-in-charge (Sample box with cover to be got approved before fabrication including the fabricator)
5
-
-
NOTE :- The rates quoted for the items shall be inclusive of all taxes, ESI & EPF , other incidental charges as deemed required for completion of item.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements