Municipal Corporation Tender

Community Toilet;Painting to old walls with 1 coats of Interior Walls with Emulsion Paints of approved make and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for internal walls

Community Toilet;Painting to old walls with 1 coats of Exterior Walls with Emulsion Paints of approved make and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 forExterior walls

Community Toilet;Supply and Transportation of 1x40W patty type tube light luminaire with copper choke, starter etc., including 1No 40W tube etc., complete as per ss and as directed by the eneingeer incharge

Community Toilet;Fixing of 40W tube light luminaire on wall / Ceiling with / TW round blocks with all accessories including giving connections and all labour charges etc., complete

Community Toilet;Supply delivery and fixing of 7 Watts LED bulb good quality make etc including cost and conveyance of all materials and all labour charges etc complete as per SS and as directed by the dept officers

Community Toilet;Supply delivery and fixing of 60 Watts LED bulb good quality make etc including cost and conveyance of all materials and all labour charges etc complete as per SS and as directed by the dept officers

Community Toilet;Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ?C? channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ?C? Channel using PVC solvent adhesive including all costs complete as per ss and as directed by the engineer incharge

Community Toilet;Supply and fixing of Steel taps good quality make etc including cost and conveyance of all materials and all labour charges etc complete as per SS and as directed by the dept officers

Community Toilet;Supply, delivery and fixing of Best Europen water closet confirming to ISI specification of standard make white glazed in colour with S Trap with best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS including all cost of materials and all fixing charges etc., complete as per ss and as directed by the engineer incharge

Community Toilet;Supply and fixing of lowdown porcelain flushing tank of 10lits capacity of standard make confirming to IS specifications and fixing the same with internal components including cost of all materials and all labour charges etc., complete as per ss and as directed by the engineer incahrge

Community Toilet;Supply and fixing of 20mm dia CPVC pipe of 4 Kgs/sqcm of approved make and standard qulaity including cost of all materials and all labour charges etc., complete as per ss and as directed by the engineer incahrge

Community Toilet;Supply and fixing of 20mm dia & 600mm long alluminium anodized towel rod with brackets and screws of best quality and standard make including cost of all materials and all labour charges etc., complete as per ss and as directed by the engineer incharge

Community Toilet;Supply and fixing stainless grab bars of required sizes of best quality and standard make and fabrication charges, using steel welding rods including buffing, polishing and finishing including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the engineer incharge

Community Toilet;Supply and fixing of Indian make flat back hand basin 1st quality confirming to IS specification with waste fittings like rubber plug, chain 32mm dia nominal size CP fittings with parallel ple thread confirming to IS and fitted with nominal bore chromium plated pillar tap of 1st quality indian make with standard CI brackets including wooden block of 550 x 400mm size with single CP pillar cock including cost and conveyance of all materials and all labour charges and fixing charges etc., complete as per ss and as directed by the engineer incharge

Community Toilet;Supply and fixing of NP soap dish heavy type with NP screws of standard make and quality including cost and conveyance of all materials and all fixing charges etc ., complete as per ss and as directed by the engineer incharge

Community Toilet;Supply delivery and fixing of TV Shape mirror of required sizes and standard make and quality and approved colour and shade including cost of materials with necessary fittings and fixing the same in position including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the engineering incharge

Community Toilet;Providing Painting with best quality synthetic enamel paint two coats of approved colour and shade over one coat of primary coat of best make and quality including cost and conveyance of all materials and all labour charges etc complete complete as per ss and as directed by the engineer incharge

Community Toilet;Providing of signages for the location of toilet including cost and conveyance of all materials and all labour charges etc complete complete as per ss and as directed by the engineer incharge

Community Toilet;Engaging of carpenter engaged on daily basis incluidng all charges etc complete as per SS and as directed by the dept officers

Community Toilet;Engaging of plumber engaged on daily basis incluidng all charges etc complete as per SS and as directed by the dept officers

Community Toilet;Engaging of Man/ woman mazdoors on hire basis for loading and unloading of materials inside the street including cost and conveyance of all materials and al labour charges etc, s per SS

Community Toilet;Supply delivery and fixing of good quality door mat including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the engineering incharge

Community Toilet;Supply and delivery and fixing of foam boards of male and female encloser boards way boards and signages for displaying of scheme wise benereficiary list s and posters made with foam board of approved soze of 5mmthick along with vinyl sticker with approved lettering and approved shade and colour including designing charges and fixing the same position including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the engineering incharge