Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for As And As To Parking Shed Next To Adm Bldg Samudra Manthan Conference Hall In Bldg No P 47 And Industrial Canteen At Mo V New Site Under Ge Nd Visakhapatnam in Visakhapatnam, Andhra Pradesh, with an estimated contract value of Rs. 1,23,00,000. The bid opening date for this tender is 11-11-2026 and the last date for bid submission is 09-12-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - AP Tender

Opening Date11 Nov 2026
Closing Date9 Dec 2026
Tender Amount₹ 1,23,00,000 
Notes
Download

Costs

Description

As And As To Parking Shed Next To Adm Bldg Samudra Manthan Conference Hall In Bldg No P 47 And Industrial Canteen At Mo V New Site Under Ge Nd Visakhapatnam

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Get the Best Price For TMT
Starting from
₹65,800/MT*
Andhra Pradesh

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed

53.8

-

-

... More
Demolition of plain or corrugated steel sheeting any gauge, thickness or similar pattern as in roof coverings complete all as directed

304

1

-

... More
Excavation in trenches not exc 1.5m wide and depth for foundations, laying of cables, pipe etc n.exc 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.

269.5

2

-

... More
Excavation in trenches not exc 1.5m wide and depth exc 1.5m but not exc 3.0m for foundations, laying of cables, pipe etc n.exc 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.

105

3

-

... More
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed. (Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming.)

256

4

-

... More
Removing excavated material /soil to a distance exc 250m but not exceeding 500m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed

118.5

5

-

... More
M & L for PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified.

37

6

-

... More
Material & Labour for RCC M-30 desing mix concrete using 20mm size aggregate as in foundation, footing, plinth beam using 20mm graded stone aggregate complete all as specified and as directed.

71.5

7

-

... More
Use and waste of steel formwork to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits of foundation and plinth beams and similar works, vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed.

273

8

-

... More
Material & Labour for RCC M-30 desing mix concrete using 20mm size aggregate as in columns, pillars, piers, posts and struts, etc using 20mm graded stone aggregate complete all as specified and as directed.

14

9

-

... More
Use and waste of steel Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified and as directed.

157

10

-

... More
Material & Labour for RCC M-30 desing mix concrete using 20mm size aggregate as in beams, cantilevers, bressumers, lintels over 1.5m span using 20mm graded stone aggregate complete all as specified and as directed.

11.5

11

-

... More
Use and waste of steel Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete complete all as specified and as directed.

85

12

-

... More
Material & Labour for RCC M-30 desing mix concrete using 20mm size aggregate as in chajjas using 20mm graded stone aggregate complete all as specified and as directed.

2.5

13

-

... More
Use and waste of steel Formwork to sides and soffits of chajjas and similar articles including edges for rough finished flat surfaces of concrete complete all as specified and as directed.

26

14

-

... More
M & L for mild steel TMT bars 10mm dia and over, as in reinforcement cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

8035

15

-

... More
M & L for high strength corrosion resistant deformed steel bars bars 5mm dia and over upto and including 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups, spaces and binders complete all as directed

2701

16

-

... More
S& F rolled mild steel work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410-W(Gde-E-250) quality-B including painting with one shop coat of zinc chrome primer at contractors workshop before fabrication complete all as specified and directed

5235

17

-

... More
S& F rolled mild steel plates (plain or chequered), channels, square cut or notched, forming holes, without any attachment conforming to Fe-410-W (Gde-E-250) quality-B complete all as specified and directed

891

18

-

... More
S & F mild steel work as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as directed

416

19

-

... More
M & L for preparation of new or previously untreated steel surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

200

20

-

... More
S & F Pre-painted galvalume aluminium zinc coating GI based corrugated / 'Z' profile steel sheet of 0.50mm thick, any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with and including self tapping screws complete all as specified and directed.

442

21

-

... More
S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet of 0.50mm thick, any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with and including self tapping screws complete all as specified and directed.

27

22

-

... More
M & L for brick work in half brick thick walls using Fly Ash bricks straight or curved on plan to any radius built in Cement Mortar 1:4 including 2 Nos of 8mm dia bars at every fourth course of brick work complete all as specified and directed.

66

23

-

... More
M & L for brick work with Fly Ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 using old size bricks complete all as specified and directed.

75

24

-

... More
M & L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed.

480

25

-

... More
M & L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces duly mixed with and including liquid water proofing compound as per manufacturers instructions, finished even and smooth with out using extra cement complete all as specified and directed.

460

26

-

... More
M & L for providing and injecting chemical emulsion for post construction anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion CHLOROPYRIFOS 20 EC at 1% concentration at 2.25 litres per linear running metre including drilling and plugging holes with cement mortar (1:2) to match with the existing surface complete all as specified and directed by Engineer-in-Charge.

140

27

-

... More
M & L for providing and injecting emulsion for post construction anti-termite treatment under existing floors using emulsion CHLOROPHYRIFOS 20 EC at 1% concentration at the rate of one litre per each hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar (1:2) to match the existing floor complete all as specified and directed by Engineer-in-Charge.

466

28

-

... More
M & L for Hardcore of gauge not exc. 63mm, deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface using broken stone or boulders complete all as directed.

50

29

-

... More
M & L for 100mm thick, PCC 1:4:8, type D-2, using 40mm graded stone aggregate as in flooring / hard standing complete all as specified and directed.

530

30

-

... More
M & L for RCC M-30 (Design Mix) using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

10

31

-

... More
Use and waste of steel formwork to soffits of suspended slabs rough finished surfaces of concrete flat complete all as specified and directed.

66

32

-

... More
M & L for rendering 5mm thick in CM 1:3 on fair faces of ceiling surfaces of slabs, chajjas, roof projection, shelves, etc. finished even and smooth with out using extra cement complete all as specified and directed.

146

33

-

... More
M & L for preparation of newly plastered surfaces of ceilings by using vaccume based sanding machine, removal of nails and applying two coats of Acrylic Washable Distemper by using auto roller/ airless sprayer over one coat of alkali resistant primer on surfaces over and including Cement based Wall Care Putty of suitable thickness including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces complete all as specified and as directed. [Note:- The contractor shall carryout Distempering & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicators before commencement of the work to GE for approval.]

276

34

-

... More
M & L for preparation of concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 Kg of cement per Sqm area, rendering 10mmthick in cement mortar 1:4 duly mixed with and including water proofing compound as per manufacturers instructions on concrete surfaces finished even and smooth without using extra cement for levelling the surfaces smooth to receive the water proofing membrane, laying Polymeric water proofing membrane of weight not less than 3.00 Kg per Sqm reinforced with polyester non-woven fabric of weight not less than 150 Grams per Sqm, by torch application with side over lap of 100mm & end over lap of 150mm & tucked into the chases on vertical surfaces by thermo fusion including applying a coat of Blown Bitumen of grade 85/25 @ 1.2 Kg per Sqm on top and bottom of membrane and finally finished with one coat of bituminous aluminium paint at 100 grams per Sqm complete all as specified and as directed.

70

35

-

... More
S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and as directed.

80

36

-

... More
S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

100

37

-

... More
S & F Stainless steel butt hinge 125mm long

51

38

-

... More
S & F floor door stopper of aluminium body and tongue anodised with hand drawn steel spring fixed in flooroverall length of cover plate 150mm complete all as specified and as directed.

9

39

-

... More
S & F Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as directed

9

40

-

... More
S & F 4.0mm thick sheet glass, ordinary quality and glazing with oil putty fixed to aluminium windows in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

10

41

-

... More
S & F 12mm thick, Prelaminated Particle Board, interior grade, prelaminated two side with decorative Choice Lamination on Both Sides, for kitchen cup boards complete all as specified and as directed.

20

42

-

... More
Supply and fixing factory made UPVC white colour Two track two panels sliding window upto 1.50m height made of (big series) frame 67x50mm & sash 46x62mm both having wall thickness of 2.3 ± 0.2mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 Sqm upto 2.50 Sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), GI fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately). [Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.]

32

43

-

... More
S & F anodised aluminium grill (anodised transperant or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design / pattern with approved standard section and fixed to the existing window frame with CP brass / stainless ateel screws @ 200mm c/c including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as directed by the Engineer-in-Charge.

120

44

-

... More
S & F 12mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required including necessary builders hardware complete all as specified and directed by the Engineer-in-Charge

10

45

-

... More
Dismantling wall and ceiling boards of any description including frame work and cover fillets complete all as directed

554

46

-

... More
S & F Seamless Calcium Silicate False Ceiling made out of 8mm thick, 1800mm x 1200mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having Phillips head with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seam less finish and applying two or more coats of Cement based Wall Care Putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of Acrylic Washable Distemper over a coat of alkali resistant primer and including Frame Work using Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.

220

47

-

... More
M & L for 40mm thick, PCC 1:2:4, type B-0, using 12.5mm graded stone aggregate as in flooring complete all as specified and directed.

530

48

-

... More
M & L for 50mm thick, PCC 1:2:4, type B-1, using 20mm graded stone aggregate as in flooring complete all as specified and directed.

30

49

-

... More
Dismantling of Floor, Hearth or Wall Tiling of any description including Cement Mortar bedding [but not backing] and removing serviceable tiles to the stores and removing rubbish / debris outside MD land complete all as specified and as directed.

64

50

-

... More
M & L for double charged, vitrified coloured ceramic tiles 10mm thick (square/rectangular), area of each tile exceeding 0.42 Sqm but not exceeding 1.0 Sqm, as in floors set and jointed neat with epoxy grout and masking tape shall be put before putting the epoxy grout, (3mm joint filling shall be done using 3mm thick PVC spacers) grout shall be througly cleaned immediatlely and pointed in white15mm thick in CM 1:6 complete all as specified and as directed.

530

51

-

... More
M & L for coloured joint free Non skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. Notes: [a] The colour/ shade/ design of tiles shall be as approved by GE. [b] The tile joint shall be kept as 3mm using tile spacers and masking tape shall be provided before applying of the epoxy grout and the surplus grout materials shall be thoroughly cleaned immediately.

70

52

-

... More
M & L for double charged vitrified coloured ceramic tiles 10mm thick (square/rectangular), area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in dado / skirting / risers to steps, etc set and jointed neat with epoxy grout and masking tape shall be put before putting the epoxy grout, grout shall be througly cleaned immediatlely and pointed in white or coloured to match the shade of the tile and laid over and including 10mm thick backing coat in CM 1:4, complete all as specified and as directed.

20

53

-

... More
M & L for coloured Glazed ceramic tiles of size 450x350x7 to 8mm thick as in vertical surfaces such as skirtings, dados and risers of steps, etc. set and jointed in neat cement slurry and pointed in white or colour cement to match with shade of tiles laid over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

130

54

-

... More
M & L for 18mm to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed or bedding layer in Cement Mortar 1:4 complete all as specified and as directed. [Note: Single stone slab shall be used for entire Width and Length of Steps, Window Cills, Cooking Platform etc. and joints shall match with the flooring. The edges of treads shall be bull nosed / half rounded.]

10

55

-

... More
M & L for preparation of newly plastered surfaces of walls/ceiling and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over priming coat of exterior primer applied @ 0.90 litre/ 10sqm over and including Cement based Wall Care Putty of suitable thickness including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces complete all as specified and as directed.complete all as directed. (Note:- The contractor shall carryout Exterior Emulsion Painting and allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Exterior emulsion painting through their authorised applicators before commencement of the work to GE for approval.

460

56

-

... More
M & L for preparation of newly plastered surfaces of walls by using vaccume based sanding machine, removal of nails and applying two coats of plastic emulsion paint by using auto roller / airless sprayer over one coat of alkali resistant primer on wall surfaces over and including Cement based Wall Care Putty of suitable thickness including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces complete all as specified and as directed. [Note:- The contractor shall carryout painting & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out works through their authorised applicators before commencement of the work to GE for approval.]

440

57

-

... More
Taking down cement plaster on brick work or stone masonry walls, etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as directed.

180

58

-

... More
S & F in repairs Vitreous China Wash Down Water Closet [Pedestal pattern] of size 560x440x395mm or nearest size, White, including flush pipe of polyethylene of low or high density of PVC, 32mm dia, PVC Connection of 15mm Bore and 600mm long with PTMT check nut and union etc. including brackets and connections to pipe and flush pipe including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap including 10 Ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

6

59

-

... More
S & F in repairs Vitreous China Ware Wash Hand Basin, White, Flat Back of size 450mm X 300mm, 32mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible Waste Pipe, PVC Connection of 15mm Bore and 600mm long with PTMT check nut and union etc. complete all as specified and as directed.

6

60

-

... More
S & F CPVC Pipes 20 mm outer diameter & Plain CPVC SDR 11 Fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed.

100

61

-

... More
S & F CPVC Pipes 25 mm outer diameter & Plain CPVC SDR 11 Fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed.

80

62

-

... More
S & F in repairs 15mm bore bib tap fancy type Chromium plated capstan head, screwed down, screwed for 15mm dia bore iron pipe complete all as specified and directed. [Make shall be Jaquar of Cat Part No. ACN-CHR-5041N or its equivalent]

6

63

-

... More
S & F in repairs 15mm bore, Hand shower (Health faucet) (ABS Body) with 8mm dia, minimum 1.2m long Spirochrome flex & wall Hook complete all as directed. [Make shall be Jaquar of Cat No. ALD-587 or its equivalent]

6

64

-

... More
S & F in repairs 15mm bore fancy type Chromium plated two way bib taps, screwed down for iron pipe or for brass ferrule with flanges complete all as specified and directed. [Make shall be Jaquar of Cat Part No. FLR-5041PM or its equivalent]

6

65

-

... More
M & L for PVC (SWR) plain floor / Nahani trap of 75/110mm di outlet including jointing with solvent cement complete all as specified and as directed.

10

66

-

... More
S & F in repairs Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 Mpa, 25 mm bore with iron wheel head, screwed both ends for iron pipe, conforming to IS, ISI Marked complete all specified and as directed.

4

67

-

... More
S & F 125mm dia round stainless steel (chrome polished) of grade SS-304, floor grating with cockroach trap with/without hole suitable for fixing in nahani trap including jointing with solvent cement complete all as directed

10

68

-

... More
S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litres capacity, two layered, hoisted and fixed in position including 20mm dia PTMT ball valve including taking down old tank complete all as specified and directed.

2

69

-

... More
S & F frameless polished edge 6mm thick clear glass mirror, size as required including cutting, edge polishing, holes / cutouts for fittings, fixing with stanless steel mirror clips including making good to adjoining surfcaes complete all as specified and directed

6

70

-

... More
Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed.

8

71

-

... More
S & F solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as specified complete all as directed.

40

72

-

... More
S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specifications complete all as directed

20

73

-

... More
S & F factory made solid fixed ventilator of size 50x47mm made out of extruded 5mm thick PVC sheet mitred cut at two corners and joined with 02 Nos of 150mm long brackets of 15x15mm MS square tube, the two vertical profiles are to be reinforced with 19x19mm MS tube and 50% of portion is fixed with 3mm thick pin headed / frosted glass and remaining portion is covered with wire mesh and 3mm thick pin headed / frosted glass louvers including 12mm dia MS guard bars and necessary fixtures complete all as directed.

10

74

-

... More
S & F 150mm long Aluminium handles, anodised cast type complete all as directed

16

75

-

... More
S & F aluminium anodised barrel tower bolt of size 150mm long of extruded section complete all as directed.

16

76

-

... More
S & F 200mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as directed.

8

77

-

... More
M & L for 110mm bore PVC (SWR) bends any radius complete all as specified.

10

78

-

... More
M & L for 75mm bore PVC (SWR) bends any radius complete all as specified.

10

79

-

... More
M & L for 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified.

10

80

-

... More
M & L for 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified.

10

81

-

... More
S & F 110mm bore PVC (SWR) rain water pipes, single socketed in any length with rubber ring joints fixed to walls/ceiling or laid in floors including taking down old pipes complete all as specified and directed.

50

82

-

... More
S & F 75mm bore PVC (SWR) rain water pipes, single socketed in any length with rubber ring joints fixed to walls/ceiling or laid in floors including taking down old pipes complete all as specified and directed.

30

83

-

... More
S & F 110mm bore PVC (SWR) rain water pipes, single socketed in any length with rubber ring joints laid in trenches including taking down old pipes complete all as specified and directed.

40

84

-

... More
S & F 110mm bore PVC (SWR) rain water pipes, single socketed in any length with rubber ring joints laid in trenches including taking down old pipes complete all as specified and directed.

60

85

-

... More
M & L for 25mm thick, PCC 1:2:4, type B-0, using 12.5mm graded stone aggregate as in flooring complete all as specified and directed.

50

86

-

... More
M & L for PCC 1:5:10, type E-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified.

2.5

87

-

... More
M & L for preparation of newly plastered surfaces of walls by using vaccume based sanding machine, removal of nails and applying two coats of Acrylic Washable Distemper by using auto roller/ airless sprayer over one coat of alkali resistant primer on surfaces over and including Cement based Wall Care Putty of suitable thickness including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces complete all as specified and as directed. [Note:- The contractor shall carryout Distempering & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicators before commencement of the work to GE for approval.]

40

88

-

... More
S & F 6mm thick Calcium Silicate board false ceiling of board size 600x600mm of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having Phillips head with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seam less finish and applying two or more coats of Cement based Wall Care Putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of Acrylic Washable Distemper over a coat of alkali resistant primer and including Frame Work using Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.

400

89

-

... More
Complete removal of existing treatment over wall surfaces including preparation of surfaces by rubbing with sand paper and using vaccume based sanding machine, removal of nails and applying two coats of Acrylic Washable Distemper by using auto roller/ airless sprayer over one coat of alkali resistant primer on surfaces over and including Cement based Wall Care Putty of suitable thickness including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces complete all as specified and as directed. [Note:- The contractor shall carryout Distempering & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicators before commencement of the work to GE for approval.]

100

90

-

... More
Complete removal of existing treatment over wall surfaces including preparation of surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over priming coat of exterior primer applied @ 0.90 litre/ 10sqm over and including Cement based Wall Care Putty of suitable thickness including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces complete all as specified and as directed.complete all as directed. (Note:- The contractor shall carryout Exterior Emulsion Painting and allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Exterior emulsion painting through their authorised applicators before commencement of the work to GE for approval.

100

91

-

... More
SCHEDULE 'A' PART-II [E/M Works]: Taking down aluminium / copper point wiring for light / fan / socket / power, etc complete with all fittings and fixtures such as switches, ceiling roses, pendents, regulators, sockets, cover plates, frame and light fitings including making good to the disturbed surfaces complete all as directed

191

92

-

... More
M & L for Point wiring with PVC insulated unsheathed multistranded copper conductor cable FRLS grade of size 1.5 Sqmm (nominal area) 1100V grade drawn through and including non mtalic PVC conduit of size 20mm dia medium grade including accessories fixed on wall/floor/roof, etc including provision of flush type metal GI boxes with modular cover plates, provision of PVC insulated, unsheathed multistranded copper conductor FRLS grade of size 1.5 Sqmm as earth continuity conductor and connecting to common earth dolly suitable for One light / fan point / Bell point controlled by one, one way switch complete all as specified and directed. [Note: the quoted rate is deemed to be inclusive for clamping of PVC conduit to steel structures of the shed through maping, etc and making good surfaces wherever required]

14

93

-

... More
All as per item No. 97 above but suitable for one 5/6 Amps socket outlet point controlled by one switch on independent board

5

94

-

... More
S & F modular switch single pole, 1 way, 6 Amps, 1 module

261

95

-

... More
S & F ceiling rose, 3 terminals, PVC/ polycarbonate, isolated body complete all as specified and directed

108

96

-

... More
S & F modular socket outlet, 6 Amps, 2/3 pin combined 2 module

91

97

-

... More
S & F LED batten light fitting 1x20 Watts, 220V, AC, wall mounted decorative box type with driver, holder including LED tube light with all connected accessories, internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of suitable sizecomplete all as directed by the Engineer-in-Charge

28

98

-

... More
S & F Energy efficient & Long life Security Light Luminaire, 35 Watt with Pressure die-cast Aluminium housing, IP-65 Protection, heat resistant glass cover, high power LEDs as light source, electronic driver including GI Bracket made out of 40 mm bore GI Tube, light Grade of size not less than 1.5 m in length and bent to shape required and fixed with 2 Nos of Pole fitting Clamps made out of MS Flat of size 50 X 6mm, bolts, nuts, washers and painting with two coats of aluminium paint over a coat of primer red oxide zinc chrome primer and connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as directed by the Engineer-in-Charge

16

99

-

... More
S & F in repairs factory made sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 8 Way, 240 Volts, IP-42 protection with 200 Amps rated bus bar and 1.5 Sqmm copper PVC sheathed cable for earth continuity alongwith dummy blank plates and suitable for having MCBs complete all as specified and as directed.

6

100

-

... More
S & F MCB, SP, 6-32 Amps, 240 Volts, 10 KA, 'C' curve

68

101

-

... More
S & F MCB, SPN, 6-32 Amps, 240 Volts, 10 KA, 'C' curve

10

102

-

... More
Earthing complete with Galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground with earth pit not less than 2.25m deep below the normal ground level with top edge of plate not less than 1.5m below normal GL connected with galvanised earth wire 4.0mm dia as earth lead by means of bolts, nuts, check nuts and washers of Galvanized iron or steel all as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion including taking out old perished earth pits complete all as directed. [Note: The unit rate shall be deemed to include for excavation & earth work in any type of soil, PCC (1:3:6) type C1 chamber, MS angle iron frame 40x40x6mm, RCC 1:2:4 type B-1 cover 40mm thick with 8mm dia steel reinforcement bars at 150mm c/c both ways, MS handle 12mm dia, CI funnel and wire mesh, GI watering pipe 20mm dia medium grade for watering, GI protection pipe light grade 15mm dia, earthing lead upto 7.5m complete all as specified in preambles of SSR Part-II and as shown in plate No. 3 of SSR Part-I.]

9

103

-

... More
M & L for Point wiring with PVC insulated unsheathed multistranded copper conductor cable FRLS grade of size 1.5 Sqmm (nominal area) 1100V grade drawn through and including concealed / surface PVC conduit of size 20mm dia medium grade including accessories fixed on wall/floor/roof, etc including provision of flush type metal GI boxes with modular cover plates, provision of PVC insulated, unsheathed multistranded copper conductor FRLS grade of size 1.5 Sqmm as earth continuity conductor and connecting to common earth dolly suitable for One light / fan point / Bell point controlled by one, one way switch including taking down old point wiring with fixtures and fittings complete all as specified and directed. [Note: Quoted rate is deemed to be inclusive for cutting through wall, chasing, pinning in and making good to the disturbed surfaces to match with existing whrever required]

156

104

-

... More
All as per item No. 108 above but suitable for one 5/6 Amps socket outlet point controlled by one switch on the same board

38

105

-

... More
All as per item No. 108 above but suitable for one 5/6 Amps socket outlet point controlled by one switch on independent board

48

106

-

... More
All as per item No. 108 above but point wiring with PVC insulated, unsheathed multistranded copper conductor FRLS grade of size 4.0 Sqmm (nominal area) suitable for power point on independent board complete all as specified and directed.

48

107

-

... More
S & F modular switch 1 way, 16 Amps, 1 module single pole

48

108

-

... More
S & F modular socket outlet, 6/16 Amps, 2/3 pin combined 2 module

48

109

-

... More
S & F modular switch single pole, 2 way, 6 Amps, 1 module

8

110

-

... More
S & F round recessed mounted LED light fitting for ceiling cutout warm/cool day light 15 Watts with all connected accessories, internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including taking down existing light fittings of any type and make and making good to the disturbed surfaces to match with existing complete all as directed by the Engineer-in-Charge

30

111

-

... More
S & F square recessed mounted LED light fitting for ceiling cutout warm/cool day light 6 Watts with all connected accessories, internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including taking down existing light fittings of any type and make and making good to the disturbed surfaces to match with existing complete all as directed by the Engineer-in-Charge

10

112

-

... More
Taking down indoor and outdoor units of Split type Air Conditioner/ Window type Air Conditioner of 1.5/ 2.0 Ton capacity including voltage stablizer carefully from its position after diconnecting the supply mains and restoring the refrigeration gas including cleaning, carrying out minor repairs, providing new insulation to the copper pipe lines and sealing the same including re-fixing the AC units after repairs to buildings as directed including connecting up and testing complete all as specified and directed. [Note:- The AC units taken down shall be kept in safe custody of the contractor and any damage to AC units shall be made good by the contractor without any extra cost to the Department.]

12

113

-

... More
S & F copper tubing 24 SWG of size 1/2" along with tubular insulation suitable for split Acs complete all as directed

102

114

-

... More
S & F copper tubing 24 SWG of size 1/4" along with tubular insulation suitable for split Acs complete all as directed

102

115

-

... More
S & F PVC drain pipe of 1.5m in length of 20mm bore for AC drain out pipe complete all as directed

43

116

-

... More
S & F Flexible, leakproof, heavy duty PVC water drain pipe 32mm bore with all accessories for interconnecting of Split AC drain pipe in series on Building roof / wall / chajjas complete all as directed

259

117

-

... More
S & F in repairs factory made sheet metal enclosure for VTPN MCCB DBs, Powder coated sheet steel enclosure fitted with bus bar, DIN Channel & neutral link & earth link, Double Door with provision and including MCCB 3/4 pole, 125 Amps, 16 KA, as incomer & outgoings as TPN 415 Volts, 4 way, IP-43 protection with 200 Amps rated bus bar suitable for mounting MCBs flush mounted with wall complete all as specified and as directed.

1

118

-

... More
S & F MCB, TPN, 63 Amps, 415 Volts, 10 KA, 'C' curve

5

119

-

... More
M & L for sub main wiring with 4 runs of single core 1100 volts grade, PVC insulated, unsheathed, FRLS copper conductor cable of size 10.0 Sqmm, drawn through and including suitable size PVC conduit and conduit accessories including provision of 1 run of 10.0 Sqmm PVC insulated, unsheathed, FRLS copper conductor cable as earth continuity conductor including taking down old sub main wiring complete all as specified and directed. [NOTE: 5 runs of 10.0 Sqmm copper wire and 1 run of PVC conduit shall be measured as one unit length. Quoted rate is deemed to be inclusive for cutting through wall, chasing, pinning in making good to the disturbed surfaces whrever required]

55

120

-

... More
M & L for sub main wiring with 2 runs of single core 1100 volts grade, PVC insulated, unsheathed, FRLS copper conductor cable of size 6.0 Sqmm, drawn through and including suitable size PVC conduit and conduit accessories including provision of 1 run of 6.0 Sqmm PVC insulated, unsheathed, FRLS copper conductor cable as earth continuity conductor including taking down old sub main wiring complete all as specified and directed. [NOTE: 3 runs of 6.0 Sqmm copper wire and 1 run of PVC conduit shall be measured as one unit length. Quoted rate is deemed to be inclusive for cutting through wall, chasing, pinning in making good to the disturbed surfaces whrever required]

170

121

-

... More
M & L for sub main wiring with 2 runs of single core 1100 volts grade, PVC insulated, unsheathed, FRLS copper conductor cable of size 4.0 Sqmm, drawn through and including suitable size PVC conduit and conduit accessories including provision of 1 run of 4.0 Sqmm PVC insulated, unsheathed, FRLS copper conductor cable as earth continuity conductor including taking down old sub main wiring complete all as specified and directed. [NOTE: 3 runs of 4.0 Sqmm copper wire and 1 run of PVC conduit shall be measured as one unit length. Quoted rate is deemed to be inclusive for cutting through wall, chasing, pinning in making good to the disturbed surfaces whrever required]

252

122

-

... More
S & F SRCD protected socket, steel enclosure with two pin and earth plug and socket with 20 Amps MCB SP complete all as specified and as directed. (Make :Havells cat part No. DHDDCDP025202003 or its equivalent).

13

123

-

... More
M&L for 4mm dia galvanised iron wire for earthing connection to building, complete all as specified and as directed.

65

124

-

... More
S & F modular stepped type electronic fan regulator, flush type on the existing phenolic sheet 120 W, 2 module complete all as specified and directed.

8

125

-

... More
S & F LED tube light fittings, mirror type with high out put diffuser 2 feet long of 9 Watts of cool white wall mounted batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-Charge.

4

126

-

... More
S & F square recessed mounted LED light fitting (2'x2') for ceiling cutout warm/cool day light minimum 3600 Lumens (36 Watts) with all connected accessories, internally prewired and connecting up with twin core twisted copper conductor cable of suitable size complete all as directed by the Engineer-in-Charge

25

127

-

... More
S & F LED post top lantern garden light fittings, of 40 Watts output, 5700 K of cool/warm white with extruded aluminium / CRCA housing and robust constructions with necessary acrylic diffuser and integrated electronic driver with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-Charge.

20

128

-

... More
S & F square recessed mounted LED light fitting for ceiling cutout height 16mm, warm/cool day light minimum 12 Watts with all connected accessories, internally prewired and connecting up with twin core twisted copper conductor cable of suitable size complete all as directed by the Engineer-in-Charge

18

129

-

... More
Taking down existing Ceiling Fan of any description and capacity from its original position and refixing the same in position after repairs to buildings after carrying out necessary servicing, cleaning, greasing, repairs to fan shaft by filling metal, grinding, polishing including connecting up with three core PVC insulated, sheathed flexible copper conductor cable of suitable size, replacement of minor spares such as canopy, capacitor and spray painting with one coat of synthetic enamel paint of approved colour duly filling the cavities with filler complete all as specified and as directed. [Note: Spares required for replacement shall be measured and paid seperately as Supply only]

4

130

-

... More
Supply only Ball bearing No. 6200 suitable for ceiling fans of any sweep and description complete all as specified

1

132

-

... More
Supply only blades suitable for ceiling fans of any sweep and description complete all as specified

2

133

-

... More
Supply only set of Hanging clamp with nut, bot, washers and split pin suitable for ceiling fans of any sweep and description complete all as specified

1

134

-

... More
Supply only down rod made of MS tube 20mm dia upto 600mm long suitable for ceiling fans of any sweep and description complete all as specified

1

136

-

... More
Taking down existing Exhaust Fan / Air circulator fan of any description and capacity from its original position and refixing the same in position after repairs to buildings after carrying out necessary servicing, cleaning, greasing, replacement of fan clamp and split pin, rubber bush, capacitor including connecting up with three core PVC insulated, sheathed flexible copper conductor cable of suitable size, replacement of minor spares and spray painting with one coat of synthetic enamel paint of approved colour duly filling the cavities with filler complete all as specified and as directed.

10

137

-

... More
M & L for rewinding of Air circulator / Pedestal fan motor of 450/600mm sweep of any make and description with super enamelled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, replacving the bearings of suitable size complete all as specified and as directed.

10

138

-

... More
S & F in repairs factory made sheet metal enclosure for DBs (Fixed flush to the wall), TPN, 4 Way, 41540 Volts, IP-42 protection with 200 Amps rated bus bar and 1.5 Sqmm copper PVC sheathed cable for earth continuity alongwith dummy blank plates and suitable for having MCBs complete all as specified and as directed.

2

139

-

... More
S & F MCB, SP, 40 Amps, 240 Volts, 10 KA, 'C' curve

4

140

-

... More
M & L for sub main wiring with 4 runs of single core 1100 volts grade, PVC insulated, unsheathed, FRLS copper conductor cable of size 6.0 Sqmm, drawn through and including suitable size PVC conduit and conduit accessories including provision of 1 run of 6.0 Sqmm PVC insulated, unsheathed, FRLS copper conductor cable as earth continuity conductor including taking down old sub main wiring complete all as specified and directed. [NOTE: 5 runs of 6.0 Sqmm copper wire and 1 run of PVC conduit shall be measured as one unit length. Quoted rate is deemed to be inclusive for cutting through wall, chasing, pinning in making good to the disturbed surfaces whrever required]

25

141

-

... More
M & L for sub main wiring with 2 runs of single core 1100 volts grade, PVC insulated, unsheathed, FRLS copper conductor cable of size 1.5 Sqmm, drawn through and including suitable size PVC conduit and conduit accessories including provision of 1 run of 1.5 Sqmm PVC insulated, unsheathed, FRLS copper conductor cable as earth continuity conductor including taking down old sub main wiring complete all as specified and directed. [NOTE: 3 runs of 1.50 Sqmm copper wire and 1 run of PVC conduit shall be measured as one unit length. Quoted rate is deemed to be inclusive for cutting through wall, chasing, pinning in making good to the disturbed surfaces whrever required]

200

142

-

... More
Supply and laying synthetic insulation rubber mat of size 1.0m x 2.0m of 2mm thick suitable for upto 3.3 KV power supply insulation category of class 'A' for indoor LT panel complete all as directed

3

143

-

... More
S & F in repairs Air termination vertical aluminium rod of length 2.0m of material AIMgSi of 16/10 dia crimped on both ends and mounted with 2 stones and fixing accessories required at ground to provide class of protection-IV with foundation complete all as specified and directed

6

144

-

... More
S & F in repairs 8mm dia aluminium alloy solid round conductor of material AIMgSi on roof conductors and down conductors above ground or earth continuity conductor complete all as specified and directed

180

145

-

... More
S & F in repairs Test joint with enclosure to interconnect aluminium conductor to earth strip, drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screws complete all as specified and directed

6

146

-

... More
S & F in repairs Lightening counter - LCD screed shows the number of lightening strikes, hour and date of lightening events buttons enable time/date setting and long viewing with replaceable battery, working life minimum five yeras complete all as specified and directed

1

147

-

... More
Earthing complete with copperel earth plate electrode of size 600x600x3mm thick buried directly in ground with earth pit not less than 2.25m deep below the normal ground level with top edge of plate not less than 1.5m below normal GL connected with copper earth strip 20x3mm as earth lead by means of bolts, nuts, check nuts and washers of Galvanized iron or steel all as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion including taking out old perished earth pits complete all as directed. [Note: The unit rate shall be deemed to include for excavation & earth work in any type of soil, PCC (1:3:6) type C1 chamber, MS angle iron frame 40x40x6mm, RCC 1:2:4 type B-1 cover 40mm thick with 8mm dia steel reinforcement bars at 150mm c/c both ways, MS handle 12mm dia, CI funnel and wire mesh, GI watering pipe 20mm dia medium grade for watering, GI protection pipe light grade 40mm dia, earthing lead upto 7.5m including taking down old earrthing sets complete all as specified in preambles of SSR Part-II and as shown in plate No. 3 of SSR Part-I.]

6

148

-

... More
Supply and Laying LT XLPE insulated, PVC sheathed, bedded, galvanised steel strip or wire armoured, heavy duty, electric power cables of size 3.5 core 95 Sqmm, 1100 volts grade, with aluminium conductor laid in trenches / passing through pipe / duct / road crossing / fixed on poles / walls and connecting up with suitable glands, lugs, nuts and bolts and testing on completion including taking out old unserviceable cable complete all as specified and directed by the Engineer-in-Charge.

35

149

-

... More
Suuply and laying Double wall corrugated duct pipe of size 50mm dia (OD) for protection of cable as per IS:16205 (Part:24) complete all as directed

35

150

-

... More
Earthing complete with Galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground with earth pit not less than 2.25m deep below the normal ground level with top edge of plate not less than 1.5m below normal GL connected with galvanised earth strip 32x6mm as earth lead by means of bolts, nuts, check nuts and washers of Galvanized iron or steel all as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion including taking out old perished earth pits complete all as directed. [Note: The unit rate shall be deemed to include for excavation & earth work in any type of soil, PCC (1:3:6) type C1 chamber, MS angle iron frame 40x40x6mm, RCC 1:2:4 type B-1 cover 40mm thick with 8mm dia steel reinforcement bars at 150mm c/c both ways, MS handle 12mm dia, CI funnel and wire mesh, GI watering pipe 20mm dia medium grade for watering, GI protection pipe light grade 40mm dia, earthing lead upto 7.5m complete all as specified in preambles of SSR Part-II and as shown in plate No. 3 of SSR Part-I.]

2

151

-

... More
Supply, install, connect, test and commissioning of 3 Phase, 4 wire, 50Hz, 415 Volts, indoor type, LT panel of suitable size made of 2.00 mm thick CRCA sheet including angle iron frame, cubical type, dust and vermin proof, factory made with front and rear opening double door with locking arrangement 415 volts, aluminium bus bar of 600 Amps for phase and 600 Amps for neutral insulated with PVC sleeves insulation and panel foundation with 2 pillars in PCC 1:3:6 type C-2 minimum 300mm under ground and 450mm over the ground level including MC 75 MS channel frame medium grade at base of the panel with 4 Nos bolts 200mm long 16mm dia grouted in PCC suitable for acommodating and including the following components as per CPRI norms complete all as specified and directed:- [a] MCCB, 4 Pole, 200 Amps, 50 Hz, 415 Volts, 36KA (with adjustable TM range) - 01 No [b] MCCB, 3 Pole, 100 Amps, 50 Hz, 415 Volts, 16KA (with adjustable TM range) - 01 No [c] MCCB, 3 Pole, 63 Amps, 50 Hz, 415 Volts, 16KA (with adjustable TM range) - 02 Nos [d] LED indication lamp [R Y B] - 01 Set [e] Digital Ammeter 0 to 200 Amps with inbuilt selector switch and CTs - 01 No [f] Digital Voltmeter 0 to 500 Volts with inbuilt selector switch - 01 No [g] Wiring with copper conductor - 1 set

1

152

-

... More
Notes for all the above items: Quoted rates are deemeded to be inclusive for the following aspects. Tenderers are advised to visit the site before submitting their bids to make themselves aware of site conditions and nothing extra shall be admissible on this account:- [a] The work has to be executed at varying heights of the buildings. [b] Debris obtained during the demolition / dismantling / taking down of various items under above BOQ shall be removed to a distance of 5 Km as directed by the Engineer-in-Charge.

-

-

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.