Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Repair / Maint Ht Distr System, Vcbs, Transformers, Maint Of Dg Sets And Other Connected Wks In Mwc, Tpw, Smhq, Fleet Office, Fmu At Naval Dockyard Under Age E/m No-iii Of Ge (u-i) Visakhapatnam in Visakhapatnam, Andhra Pradesh, with an estimated contract value of Rs. 38,00,000. The bid opening date for this tender is 27-05-2025 and the last date for bid submission is 17-06-2025. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Military Engineer Services - MES Tender
Electrical Generators And Transformers
Electrical and Electronics
Eprocure
Opening Date27 May 2025
Closing Date17 Jun 2025
Tender Amount₹ 38,00,000
Costs
EMD
₹ 76,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_710573_1Tender No
8749/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
M&L sand cushioning with clean and dry stone crushed stone dust in trenches for protection of UG cable and including punning down complete all as specified and directed. Note:- Punned thickness of stone dust coushioning shall only measured and paid.
9
-
-
... More
Supplying and laying un-reinforced precast concrete cable cover, class HV, Type 1, flat, of size 300mmx 180mm x 40mm, laid along alignment of cable as protection to cable in trenches complete all as specified and directed.
610
-
-
... More
Boring holes horizontally under road, manually, in soft / loose soil, without cutting / disturbing the existing road surface, suitable for inserting pipe of n exc. 100 mm bore at a depth 0.75 m to 1.0 m from road surface for passing of UG cable, getting out and disposal of soil to a distance not exceeding 50 m complete all as specified and as directed.
Note:- GI Pipe shall be measured and paid separately.
10
-
-
... More
S&F 100 mm bore dia galvanised steel tubing, light grade, laid under road crossing, for cable protection or fixed to poles, walls or laid under floors including taking down existing un-serviceable pipe of any description. complete all as specified and directed.
10
-
-
... More
Supply & laying XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 11000 volts, Earthed, grade cross sectional area 240 Sqmm, 3 core, laid in trenches / duct / on pole / on wall including taking out existing unserviceable cable complete all as specified and directed.
30
-
-
... More
All as per Sl item No. 8.00 here in before but cable of size 185 sqmm, 3 core
60
-
-
... More
All as per Sl item No. 8.00 here in before but cable of size 120 sqmm, 3 core
60
-
-
... More
Supplying and laying synthetic rubber insulated mats 3 mm thick for voltage upto 33 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m including taking down existing un-serviceable mat complete all as specified and directed.
15
-
-
... More
S&F in repair danger notice plate of size 25 x 20 cm & 1.6mm thick mild steel sheet, vitreous enameled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size for HT compete all as specified and as directed.
10
-
-
... More
M&L cable jointing kit for 11 KV (Earthed grade) 3 core XLPE armoured aluminium conductor cable of size 120 to 185 sqmm for outdoor termination, heat shrink type joint complete with jointing material and accessories including taking out existing un-serviceable joit kit complete all as specified and directed.
Note:- (i) The cost of Disconnecting and reconnecting the cable with HT network is deemed to be included in the unit rate quoted against this item.
(ii) The cost of re-arranging the cable if needed is deemed to be included in the unit rate quoted against this item.
3
-
-
... More
All as per Sl item No. 13.00 here in before but cable of size 240 to 400 sqmm
3
-
-
... More
M&L cable jointing kit for 11 KV (Earthed grade) 3 core XLPE armoured aluminium conductor cable of size 120 sqmm to 185 sqmm for indoor termination, heat shrink type joint including taking out existing un-serviceable joit kit complete with jointing material and accessories complete all as specified and directed.
Note:- (i) The cost of Disconnecting and reconnecting the cable with HT network is deemed to be included in the unit rate quoted against this item.
(ii) The cost of re-arranging the cable if needed is deemed to be included in the unit rate quoted against this item.
2
-
-
... More
All as per Sl item No. 15.00 here in before but cable of size 240 to 300 sqmm
2
-
-
... More
M&L cable jointing kit for 11 KV (Earthed grade) 3 core XLPE armoured aluminium conductor cable of size 240 to 400 sqmm for straight through, heat shrink type joint with jointing material and accessories including taking out existing un-serviceable joit kit complete all as specified and directed.
Note:- (i) The cost of excavation is deemed to be included in the unit rate quoted against this item.
1
-
-
... More
All as per Sl item No. 17.00 here in before but cable of size 95 to 185 sqmm
2
-
-
... More
M&L for calibration and testing of combined inverse time over current and instantaneous IED relay, checking and cleaning / decarburizing its moving and fixed contacts and ensure physical healthiness with visual check for healthy tripping of over current and earth fault, adjusting tripping time, flag setting, ratio setting, instantaneous time setting etc as per installed capacity of transformer to be saved on maximum, short circuit current in accordance with percentage impedance of transformer with artificial current injection on primary side & secondary side with current injection test set on HT Switchgear, complete all as specified and directed by Engineer-in charge.
Note :- (i) Spares / meters shall be measured and paid separately. The job of calibration & setting shall be done in presence of MES rep / concern JE. Contactor shall provide the necessary test report of calibration done to department before claiming the payment.
(ii) Contractor shall provide all testing equipment, T&P and injection kit for testing and creating the artificial fault for testing the proper functionality of relays and instruments on designed settings & unit rate quoted against this item shall be considered to include all these aspects.
(iii) Necessary test report of calibration shall be submitted by the contractor to Engr-in-Charge before claiming any payment against this item.
(iv) The cost of manpower, HT tape used for opening and reconnecting cable is deemed to be included in the unit rates quoted.
(v) The testing shall be carried out by auhtorised service engineer of OEM and approval of the same shall be taken from Engr-in-Charge.
8
-
-
... More
M&L for Overhauling/Repair of 11 KV VCB with cleaning of all parts, adjusting contacts, checking epoxy body, drive insulator , spring charge mechanism, locking arrangements tripping coil circuits (closed/open) etc, checking all mechanical operations supporting insulators bush trolley auxiliary contact. Make female contact and check all wiring including minor item required for repair complete all as specified and directed. Note:- The cost of all minor Items like nuts, bolts, spring washers, HT Insulation tapes, petroleum jelly , CTC spray etc is deemed to be included in the unit price.
8
-
-
... More
M&L for Overhauling / Repair of 11 KV VCB Panel with cleaning of all parts, checking & cleaning circuit all busbar spout bushings, CT/PT spout bushings, Busbar cleaning of CT and PT, checking all wiring & rectifying Wiring faults , cleaning metering chamber, applying mono plast compound at busbar joints , fixing up issues with measuring instruments etc including minor item such as nuts, bolts, copper wires, HT insulation tapes etc required for repair complete all as specified and directed. Note:- The testing/inspecting Engineer Should be minimum a State Govt License holder or any OEM authorised License Holder
8
-
-
... More
M&L for complete overhauling / repair of float cum boost charger, cleaning of all parts, checking all wiring , Checking Output Voltage, Checking entire DC Circuit from Charger to the panel Fuse including replacement of minor item required for repair complete all as specified and as directed by Engr-in-Charge.
2
-
-
... More
M&L for collecting necessary required data & peak load details from IED of any type / Make from 11kV HT panel, transformer full load details during peak hours, relay Setting calculations & Co-ordination study, unit protection setting of transformers, furnishing feeder wise settings & submitting report with firm recommendations, achieving stream power distribution (complete 11 KV system) overall co-ordinations of time, adjusting / setting to plug and time multiplier settings of IED complete all as specified and as directed by Engr-in-Charge.
8
-
-
... More
M&L for power pack for auxiliary power supply to operate closing & tripping coils, protection relay circuits, control circuit & other indication lamps for 11 KV HT VCB panel of capacity 400 to 1250 Amps & make as per OEM, input supply 230 Volts AC (1 phase) or 415 V AC (3 phase) to give an output supply of 24/30/110 V, DC with battery backup including taking down existing un-serviceable power pack complete all as specified and as directed.
Note :- Unit rates quoted against this item shall deemed to include cost of suitable stranded copper conductor cable from power pack to HT panel complete
1
-
-
... More
S&F busbar/CT supporting insulator of rating 400 to 1250A, make as per OEM, suitable for 11kV VCB panel including taking down existing un-serviceable busbar complete all as specified and as directed.
2
-
-
... More
S& F service / test position limit switch 1NO+1NC, suitable for 400A to 1250A 11 KV VCB & of make as per OEM including taking down existing un-serviceable limit switch complete all as specified and as directed.
2
-
-
... More
S&F rectifier unit (Monoblock), 16A, for spring charging motor of rating 400 to 1250A suitable for 11kV VCB panel & of make as per OEM including taking down existing un-serviceable rectifier unit complete all as specified and as directed.
1
-
-
... More
S&F spring charging universal motor with gear box 220V AC of rating 400 to 1250A suitable for 11kV VCB & of make as per OEM including taking down existing un-serviceable motor complete all as specified and as directed.
2
-
-
... More
S&F thermostat suitable for HT VCB of capacity 11 KV, make as per OEM suitable to operate on 230 Volts AC supply with necessary wiring and control cable with toggle switch including taking down existing un-serviceable thermostat complete all as specified and as directed.
6
-
-
... More
S&F space heater suitable for HT VCB of capacity 11 KV, make as per OEM suitable to operate on 230 Volts AC supply with necessary wiring and control cable with toggle switch including taking down existing un-serviceable space heater complete all as specified and as directed.
6
-
-
... More
S&F 3 Phase multifunction meter, digital type, displaying current, Voltage, frequency, PF measurement, Class 0.5 with inbuilt selector switch including taking down existing un-serviceable multifunction meter complete all as specified and as directed.
6
-
-
... More
S&F LED indication lamps, 110 V of various colours suitable for VCB including taking down existing un-serviceable indication lamps complete all as specified and as directed.
15
-
-
... More
S&F programmable numerical inverse time over current / earth fault relay having IDMT / NI / VI / DT Curves with minimum time delay zero with respect to I>>, I>>>, Ie>>, Ie>>> settings, suitable for VCB of capacity 11/12 KV with all original / Retrofitting arrangements including taking down existing un-serviceable relay complete all as specified and as directed.
2
-
-
... More
S&F epoxy resin body of rating 400 to 1250 A, suitable for 11KV VCB panel & of make as per OEM including taking down existing un-serviceable epoxy resin body complete all as specified and as directed.
2
-
-
... More
S & F top clamps with hardware (pair) R/B phase, 400-1250 Amps, suitable for 11KV VCB panel & of make as per OEM including taking down existing un-serviceable top clamps complete all as specified and as directed.
1
-
-
... More
S & F top clamps with hardware (pair) Y phase, 400-1250 Amps, suitable for 11KV VCB panel & of make as per OEM including taking down existing un-serviceable top clamps complete all as specified and as directed.
1
-
-
... More
S & F insulating cover for R/Y/B phase, 400-1250 Amps, suitable for 11KV VCB and of make as per OEM including taking down existing un-serviceable insulating cover complete all as specified and as directed.
1
-
-
... More
S & F brass nut / racking nut, 400-1250 Amps rating suitable for 11KV VCB panel & of make as per OEM including taking down existing un-serviceable nut complete all as specified and as directed.
1
-
-
... More
S & F Epoxy Resin Spout bushings for busbar single pole R/B phase, 400-1250 Amps, suitable for 11KV VCB panel & of make as per OEM including taking down existing un-serviceable ibushings complete all as specified and as directed.
8
-
-
... More
S & F Epoxy Resin Spout bushings for busbar single pole Y phase, 400-1250 Amps, suitable for 11KV VCB panel & of make as per OEM including taking down existing un-serviceable ibushings complete all as specified and as directed.
4
-
-
... More
S & F Epoxy Resin Spout bushings for CT/PT/Circuit spout single pole R/Y/B phase , 400-1250 Amps, suitable for 11KV VCB panel & of make as per OEM including taking down existing un-serviceable ibushings complete all as specified and as directed.
8
-
-
... More
S & F isolating contact any type of single pole incoming / Outgoing , 400-1250 Amps, suitable for 11KV VCB panel & of make as per OEM including taking down existing un-serviceable isolating contact complete all as specified and as directed.
2
-
-
... More
S & F flexible connection, 400-1250 Amps, suitable for 11KV VCB panel & of make as per OEM including taking down existing un-serviceable flexible connection complete all as specified and as directed.
2
-
-
... More
S & F dashpot assembly upto 25 KA, 400-1250 Amps, suitable for 11KV VCB panel & of make as per OEM including taking down existing un-serviceable dashpot complete all as specified and as directed.
2
-
-
... More
S & F breaker wheel nylon, 400-1250 Amps, suitable for 11KV VCB panel & of make as per OEM including taking down existing un-serviceable breaker wheel complete all as specified and as directed.
2
-
-
... More
S & F top guide roller, 400-1250 Amps, suitable for 11KV VCB panel & of make as per OEM including taking down existing un-serviceabletop guide roller complete all as specified and as directed.
2
-
-
... More
S & F guide bush, 400-1250 Amps, suitable for 11KV VCB panel & of make as per OEM including taking down existing un-serviceable guide bush complete all as specified and as directed.
2
-
-
... More
S & F Rack in / Rack out Handle / Motor charging handle up to 400-1250 Amps, suitable for 11KV VCB panel & of make as per OEM including taking down existing un-serviceable Handle complete all as specified and as directed.
2
-
-
... More
S & F grommet suitable for 400-1250 Amps rating, 11KV VCB panel & of make as per OEM including taking down existing un-serviceable grommet complete all as specified and as directed.
3
-
-
... More
S & F drive insulator with M10 Nylock Nut suitable for 630 Amps rating, 11KV VCB panel & of make as per OEM including taking down existing un-serviceable drive insulator complete all as specified and as directed.
2
-
-
... More
S & F drive beam (Pair) suitable for 400-1250 Amps rating, 11KV VCB panel & of make as per OEM including taking down existing un-serviceable insulating cover complete all as specified and as directed.
2
-
-
... More
S&F closing coil assembly, 110V DC suitable for 11KV VCB panel & of make as per OEM including taking down existing un-serviceable insulating cover complete all as specified and as directed.
3
-
-
... More
S&F tripping coil 110V DC suitable for 11KV VCB panel & of make as per OEM including taking down existing un-serviceable insulating cover complete all as specified and as directed.
2
-
-
... More
S&F T‐N‐C Switch (Breaker Control Switch) for control switches & control wiring, suitable for 11KV VCB & make as per OEM including taking down existing un-serviceable insulating cover complete all as specified and as directed.
3
-
-
... More
S&F vacuum interrupter of rating 400A / 630A / 1250A suitable for 11KV VCB & make as per OEM including taking down existing un-serviceable insulating cover complete all as specified and as directed.
1
-
-
... More
S&F bakelite HRC fuse base with carrier 32A, 415 V with HRC fuse 5 amps of make as per OEM including taking down existing un-serviceable fuse complete all as specified and as directed.
3
-
-
... More
S&F buffer for opening spring suitable for 11KV VCB & make as per OEM including taking down existing un-serviceable buffer complete all as specified and as directed.
3
-
-
... More
S&F buffer for closing spring suitable for 11KV VCB & make as per OEM including taking down existing un-serviceable buffer complete all as specified and as directed.
3
-
-
... More
S&F ratchet wheel suitable for 11KV VCB & make as per OEM including taking down existing un-serviceable ratchet wheel complete all as specified and as directed.
3
-
-
... More
S&F trip roller suitable for 11KV VCB & make as per OEM including taking down existing un-serviceable trip roller complete all as specified and as directed.
2
-
-
... More
S&F motor cut off switch micro switch assembly suitable for 11KV VCB & make as per OEM including taking down existing un-serviceable cut off switch complete all as specified and as directed.
2
-
-
... More
S&F 12 way auxilliary switch (6 NO+ 6 NC) suitable for 11KV VCB & make as per OEM including taking down existing un-serviceable auxilliary switch complete all as specified and as directed.
2
-
-
... More
S&F push button actuator 1 No element, 22.5 mm dia assembly including taking down existing un-serviceable actuator complete all as specified and as directed.
2
-
-
... More
Labour / Technician only for identifying, diagnosing, tracing, checking & rectifying High Tension (11KV) faults, tracing location by meggering the lines, faults in panels, VCB`s, Transformers and other switchgears at any location, any time round the clock and rectifying it to restore the supply within time limit at various locations using appropriate fault locator, cable route locator etc complete all as specified and directed.
Note:- 1. All the activities to trace the fault, rectifying & restoring the supply shall be carried out within specific reasonable time as directed by the Engineer-in-charge. 2. The cost of required tools (T& P), minor items such as lugs, nuts, bolts, HT insulation tape and safety equipments required for the job shall deemed to be included in the unit rate quoted against this item & nothing extra shall be paid to contractor by the department on these ground.
3. Safety of manpower deployed for the job is contractor’s responsibility. In case of any accident / Fatal injury, contractor shall be held responsible to settle all claims and nothing extra shall be paid to the contractor on this account.
4. The cost of all manpower (any number) for the job is deemed to be included in the quoted unit rate.
5. The cost of Fault identification by use of fault locator (if needed) is catered in separate Items.
6. Minimum one VCB / RMU technician, one Transformer Technician & one cable Jointer must be available round the clock during rectification process of fault if respective fault occurs.
8
-
-
... More
M&L for detecting HT / LT UG cable faults located in any stretch / depth with sophisticated cable fault locator consisting of microprocessor based pre-locator system, HV surge generator, fault pin point surge wave receiver, cable identification instrument , cable tracer for exact location of under ground cable routes complete all as directed.
Note:- The rate quoted deemed to be inclusive of arrangement of necessary fault locator equipment, transportation of equipment & charges for service engineer.
10
-
-
... More
S&F 11 KV CT, epoxy resin cast, dry type, indoor, 200/100 (primary) -5 + 5 A (Secondary) , with core 1, class 0.5, core 2 class 5P10 for fixing with spout bushing including taking down existing un-serviceable CT complete all as specified and as directed.
1
-
-
... More
S&F in repair 11 KV CT, epoxy resin cast, dry type, indoor, 100/50 (primary) -1 + 1 A (Secondary), with core 1, class 0.5, core 2 class 5P10 for fixing with spout bushing including taking down existing un-serviceable CT complete all as specified and as directed.
1
-
-
... More
S&F resin cast 11kV /√3 / 110v/√3 potential transformers, make as per OEM suitable for 11kV VCB panel including taking down existing un-serviceable PT complete all as specified and as directed.
2
-
-
... More
M&L for testing of HT 11KV VCB 630A/800A complete for hypotest using isolation transformer, variac etc at any location by injecting high voltage breaker opening / closing timing time testing and tuning of vacuum interrupters and all contacts, current carrying parts, testing and tuning of rotating mechanism, insulation test, micro ohm test with suitable test kits, tool and instruments , test report to be signed by contractor, JE, Engeer-in-Charge & countersigned by GE complete all as specified and directed by the Engineer-in-Charge.
Note:- The servicing shall be carried out by auhtorised service engineer of OEM and approval of the same shall be taken from Engr-in-Charge.
2
-
-
... More
M&L for applying silicone High Voltage Insulator coating (Si-COAT 570 RTV) solution using electric airless sprayer to the inside surface of cable chamber alongwith busbar chamber & breaker chamber including all Spout bushings, insulators, CTs complete of 11 KV Indoor VCB panel including all dis-connection & re-connection of cables etc. complete all as specified and directed.
Note:- (i) Quantity of solution consumed per VCB panel shall not be less than 3.0 Kg
(ii) Each VCB whether I/C or O/G should be treated as one unit.
8
-
-
... More
M&L with replacement of 6mm thick synthetic rubberized cork sheet gasket for top cover, HT/LT bushes for transformer of capacity 100 to 800 KVA including tightening all the bushings and top cover to avoid any oil leakages complete all as specified and directed.
5
-
-
... More
S&F off load tap changer assembly suitable for transformer of capacity upto 800 KVA as per existing with 5 tapping position including opening top cover, conservator etc including taking down existing un-serviceable tap changer complete all as specified and as directed.
2
-
-
... More
Shifting of standby Transformer of any capacity from any sub station to within 5km, closing the transformers for loading into transporting vehicle with the help of crane, transportation to another site, unloading, including disconnecting and removing of existing faulty transformer and installation of standby transformer, making necessary HT/LT connections, earth connections and restoration of power supply including all T&P required complete all as specified and as directed.
3
-
-
... More
M&L for isolating the HT supply of outdoor type transformer of capacity 100 to 800 KVA, disconnecting HT and LT connections by opening clamps, bus bar extension and isolating the cables, keeping all the cables out from the HT/LT sides, physically checking of transformer for healthiness such as checking pressure release valve, oil condition etc. and performing transformer tests such as HV/LV megger test, ratio test, magnetic balance test, checking the lead condition from winding to bus rods, necessary soldering / jointing etc complete all as specified and as directed.
Note:-
(i) All testing shall be done in presence of Engr-in-Charge or his accredited rep and test reports shall be signed by contractor and Engr-in-Charge and kept on record.
(ii) If the transsformer found satisfactory then HT/LT connections, assembly etc shall be done by the contractor and transformer shall be charged. (iii) If the transformer fails in these tests then the contractor has to shift the transsformer for winding / overhauling which shall be measured and paid separately.
(iv) Cost of winding / overhauling if required shall be measured and paid separately.
(v) The cost of Transportation of Transformer to & from the workshop if needed is deemed to be included in the unit rates quoted.
6
-
-
... More
M&L for rewinding of distribution transformers of any capacity / size / type by strip opening & rewinding the HV coils (i.e. primary coils) from core assembly safely, removing old defective insulation paper, re-winding the coils with new copper wire as per I.S. of same gauge and existing size together with new insulated materials / bracings before placing in to the transformer and assembling the coil with new DPC insulation and fitting the coils in the chamber, testing and commissioning the transformer and recording the test results complete all as directed.
Note: M&L for re-insulation of serviceable coils will be measured & paid separately under relevant items.
110
-
-
... More
All as per Sl item No. 75.00 here in before but for LV coils
100
-
-
... More
M&L for re-insulating windings of HT / LT distribution transformers of capacity 100 to 750 KVA by strip opening of HT / LT coils (i.e. Primary / secondary coils) from core assembly safely, unwinding the HT / LT coils (i.e. Primary / secondary coils) complete, removing the old defective insulation paper and replacing with new DPC insulation to the copper conductor, re-varnishing of the windings with super varnish including heating, drying, backing complete carefully and thoroughly inside the heating chamber at suitable temperature to obtain required value of insulation resistance etc. all as directed by Engr-in- charge.
45
-
-
... More
M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to earth lead of galvanised iron strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 connected to earthing test point including dismantling un-serviceable earthing complete all as specified and directed.
Note:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, Main earthing lead from earth electrode to test point upto 7.5 m length, 20 mm bore medium grade GI watering pipe, 40 mm bore GI medium grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.
5
-
-
... More
Supply and topping up of transformer oil with di-electric strength not less than 60 KV in 2.5mm rod gap into the conservator tank / body tank of the transformer / OCB / FRMUs etc at various locations complete all as directed by the Engineer-in-Charge.
260
-
-
... More
Filtration of transformer oil of transformers / FRMUs installed at various locations to achieve di-electric strength not less than 60 KV at 2.5mm gap as per relevant IS with portable filtration plant, testing of the oil for the di-electric strength before filtration and after filtration complete all as directed by the Engineer-in-Charge.
3600
-
-
... More
S&F in repair brass spindle / studs for terminal on HT side threaded complete with nut, washers etc of suitable dia for transformer capacity of 100 - 400 KVA including taking down existing un-serviceable brass spindlecomplete all as directed by the Engineer-in-Charge.
3
-
-
... More
All as per Sl item No. 81.00 here in before but suitable for 500 to 800 KVA transformer
3
-
-
... More
S&F brass spindle / studs for terminal on LT side threaded complete with nut, washers etc of suitable dia for transformer capacity of 100 - 400 KVA including taking down existing un-serviceable brass spindle complete all as directed by the Engineer-in-Charge.
3
-
-
... More
All as per Sl item No. 83.00 here in before but suitable for 500 to 800 KVA transformer
3
-
-
... More
S&F silica gel breather assembly complete suitable for 100 to 400 KVA transformer as per existing with breather unit and silica gel including connecting with proper necessary gaskets if necessary including taking down existing un-serviceable breather assembly complete all as directed by the Engineer-in-Charge.
3
-
-
... More
All as per Sl item No. 85.00 here in before but suitable for 500 to 800 KVA transformer
1
-
-
... More
Supply and replacement of silica gel in breather of transformers all as specified and as directed.
15
-
-
... More
S&F HT bushings made out of porcelain, as per existing and suitable for distribution transformer of capacity 100 to 400 KVA including taking down existing un-serviceable bushingscomplete all as specified and as directed.
3
-
-
... More
All as per Sl item No. 88.00 here in before but suitable for 500 to 800 KVA transformer
3
-
-
... More
S&F LT bushings made out of porcelain, as per existing and suitable for distribution transformer of capacity 100 to 400 KVA including taking down existing un-serviceable bushingscomplete all as specified and as directed.
4
-
-
... More
All as per Sl item No. 90.00 here in before but suitable for 500 to 800 KVA transformer
4
-
-
... More
S&F Oil gauge glass with gaskets as per existing suitable for distribution transformers of capacity 100 to 800 KVA including taking down existing unserviceable glass complete all as specified and as directed.
2
-
-
... More
S&F OTI (Oil Temperature indicator) as per existing suitable for distribution transformers of capacity 100 to 800 KVA including taking down existing unserviceable OTI complete all as specified and as directed.
1
-
-
... More
M&L for preparation of old exposed painted surfaces of indoor / outdoor type transformer of capacity 100 to 400 KVA and painting the same with two coats of synthetic enamel paint including writing details of transformer on transformer plinth / base with white synthetic enamel paint on black synthetic enamel paint back ground complete & including one coat of white wash on exposed surface of transfomer plinth / base complete all as specified and as directed.
Note :- Colour of paint shall be as decided by Engr-in-Charge.
3
-
-
... More
All as per Sl item No. 94.00 here in before but 500 to 800 KVA transformer
2
-
-
... More
S&F gun metal drain valves suitable for transformer of capacity 100 to 800 KVA including taking down existing un-serviceable drain valves complete all as specified and as directed.
2
-
-
... More
M&L earth continuity conductor or main earthing lead using 32 x 6 mm galvanised iron strip, fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc. as required including taking down existing un-serviceable strip complete all as specified and directed.
35
-
-
... More
M&L for repairing burnt out alternator wiring, replacing worn out connectors, nuts and bolts, warming up the alternators, cleaning the dust with dry blow air, megger the insulation values, measure and correct the load / no load excitation voltages before & after maintenance for 750 KVA DG Set complete all as specified and as directed by Engr-in-Charge.
1
-
-
... More
All as per Sl item No 98.00 here in before but for 100 to 200 KVA DG Set.
1
-
-
... More
All as per Sl item No 98.00 here in before but for 40 to 62.5 KVA DG Set.
2
-
-
... More
M&L for replacement of complete water hose pipe set including clips,nuts, bolts and washers etc (as per existing) for DG set of capacity 750 KVA complete all as specified and as directed.
1
-
-
... More
All as per Sl item No. 101.00 here in before but for DG Set of 100 to 200 KVA capacity
1
-
-
... More
All as per Sl item No. 101.00 here in before but for DG Set of 40 to 62.5 KVA capacity
2
-
-
... More
S&F 02 sets of air filters as per existing, suitable for 750 KVA DG Set and of make as per OEM including taking down existing un-serviceable filter complete all as specified and as directed by Engr-in-Charge.
1
-
-
... More
S&F in repair fuel water seperator as per existing, suitable for 750 KVA DG Set and of make as per OEM including taking down existing un-serviceable seperator complete all as specified and as directed by Engr-in-Charge.
1
-
-
... More
M&L for replacement of complete fuel and lub oil hose pipe set with clamp / clip etc (as per existing) for DG set of capacity 750KVA complete all as specified and as directed.
1
-
-
... More
All as per Sl item No. 106.00 here in before but for DG Set of 100 to 200 KVA capacity
1
-
-
... More
All as per Sl item No. 106.00 here in before but for DG Set of 40 to 62.5 KVA capacity
2
-
-
... More
M&L for pump & injectors calibration (as per existing) for DG set of capacity 750 KVA complete all as specified and as directed.
1
-
-
... More
All as per Sl item No. 109.00 here in before but for DG Set of 100 to 200 KVA capacity
1
-
-
... More
All as per Sl item No. 109.00 here in before but for DG Set of 40 to 62.5 KVA capacity
2
-
-
... More
M&L for replacement of 35 Sqmm, leaded copper battery cable set of 2 Nos, length not less than 1.5 mtr each, suitable for DG sets, including GM terminals at one end and copper lugs at other end complete all as specified and as directed.
Note:- 02 Nos cable of 1.5 m length each shall be measured as one unit.
3
-
-
... More
M&L for repair and servicing of self starters including replacement / rewinding of armature, carbon brush set with holder, king pin holder, check nut, body screens, clutch plate assembly and solenoid switch etc (as per existing) for DG set of capacity 750 KVA complete all as specified and as directed.
1
-
-
... More
All as per Sl item No. 113.00 here in before but for DG Set of 100 to 200 KVA capacity
1
-
-
... More
All as per Sl item No. 113.00 here in before but for DG Set of 40 to 62.5 KVA capacity
2
-
-
... More
Supply and topping up of engine oil 15W40 or as per manufacturer’s recommendations suitable for DG sets complete all as specified and as directed.
210
-
-
... More
Supply and topping up of radiator coolants as per OEM’s recommendations suitable for DG sets complete all as specified and as directed.
120
-
-
... More
M&L for repair and servicing of radiator of 750 kVA DG set including cleaning with chemical treatment complete all as specified and directed.
1
-
-
... More
All as per Sl item No 118.00 here in before but for 100 to 200 KVA DG Set.
1
-
-
... More
All as per Sl item No 118.00 here in before but for 40 to 62.5 KVA DG Set.
2
-
-
... More
M&L for carrying out 'B' check for DG set of capacity 750 KVA after 06 months or 250 hrs running, whichever is earlier as per manufacturer's recommendation including replacement of fuel filters, air filters, oil filters, 'O' rings, engine oil, gasket, coolant etc complete all as per manufacturers instructional manual and all as directed by Engg-in-charge.
Make of Engine: Kirlosker / CUMMINS / Ashok Layland / Greaves Cotton Note:- Unit rates quoted against this item shall be considered to include cost of fuel filters, air filters, oil filters, 'O' rings, gasket etc. however engine oil & coolant shall be measured and paid seperately under relevant item.
1
-
-
... More
All as per Sl item No. 121.00 here in before but for DG Set of 100 to 200 KVA capacity
2
-
-
... More
All as per Sl item No. 121.00 here in before but for DG Set of 40 to 62.5 KVA capacity
2
-
-
... More
M&L for Overhauling / Servicing of AMF panel of 750 KVA DG set with microprocessor controller suitable electrical and DG controls and auto / manual and bypass arrangement complete with suitable capacity 4 pole power contactors, DG controls and auto/ manual mode including testing, commissioning complete complete all as specified and as directed by Engr-in-Charge.
Note:- All the minor parts such as nuts and bolts, insulation tape, grease, anti rust spray etc shall deemed to be included in the unti rate quoted against this item.
1
-
-
... More
All as per Sl item No. 124.00 here in before but for DG Set of 100 to 200 KVA capacity
1
-
-
... More
All as per Sl item No. 124.00 here in before but for DG Set of 40 to 62.5 KVA capacity
1
-
-
... More
S&F AMF relay (SCADA Compatible auto synchronizing relay) suitable for DG set of capacity 750 KVA & of make as per OEM including taking down existing un-serviceable relay complete all as specified and as directed by Engr-in-Charge.
1
-
-
... More
All as per Sl item No 127.00 here in before but for 100 to 200 KVA DG Set.
1
-
-
... More
All as per Sl item No 127.00 here in before but for 40 to 62.5 KVA DG Set.
1
-
-
... More
S&F energy meter suitable for DG set of 40 to 750 KVA capacity & of make as per OEM including taking down existing un-serviceable energy meter complete all as specified and as directed by Engr-in-Charge.
2
-
-
... More
S&F AVF meter suitable for DG set of any capacity & of make as per OEM including taking down existing un-serviceable AVF meter complete all as specified and as directed by Engr-in-Charge.
2
-
-
... More
S&F on delay timer suitable for DG set of any capacity & of make as per OEM including taking down existing un-serviceable on delay timer complete all as specified and as directed by Engr-in-Charge.
2
-
-
... More
S&F selector switches suitable for DG set of any capacity & of make as per OEM including taking down existing un-serviceable selector switches complete all as specified and as directed by Engr-in-Charge.
6
-
-
... More
S&F 24 V, 10 A, SMPS based automatic float cum boost charge type battery charger suitable for DG set of any capacity & of make as per OEM including taking down existing un-serviceable battery charger complete all as specified and as directed by Engr-in-Charge.
2
-
-
... More
S&F push buttons with NO, NC elements suitable for DG set of any capacity & of make as per OEM including taking down existing un-serviceable push buttons complete all as specified and as directed by Engr-in-Charge.
6
-
-
... More
S&F LED indication lamps suitable for DG Set of any capacity including taking down existing un-serviceable indication lamps complete all as specified and as directed by Engr-in-Charge.
6
-
-
... More
S&F DC Hooter suitable for DG set of 40 to 750 KVA capacity & of make as per OEM including taking down existing un-serviceable DC Hooter complete all as specified and as directed by Engr-in-Charge.
2
-
-
... More
S&F speed control unit suitable for DG set of 40 to 100 KVA capacity & of make as per OEM including control wiring from DG set to speed control unit along with necessary additions / alterations if required including taking down existing un-serviceable speed control unit complete all as specified and as directed by Engr-in-Charge.
1
-
-
... More
All as per Sl item No. 138.00 here in before but for DG set of 101 KVA to 750 KVA capacity
1
-
-
... More
S & F maintenance free battery of 12 V minimum 90/100 AH including terminal clamps, copper lead of suitable length including testing and commissioning including taking down existing un-serviceable battery complete all as specified and directed by Engr-in-Charge.
1
-
-
... More
All as per Sl item No. 140.00 here in before but for 180 AH
1
-
-
... More
Disconnecting the defective / burnt alternator from engine of DG sets of capacity 40 to 62.5 kVA, removing from base frame and shifting to the workshop, removing rotor and cutting the defective copper winding or armature winding and cleaning the slots, complete re-winding using super enameled copper wire, varnishing and drying using three coats of insulating varnishing re-assembling the rotor after repairs/ re-setting, re-installation at site complete all as specified and as directed by Engr-in-Charge.
Note :- Supply of copper wire required for rewinding shall not be considered to be included in this item and shall be measured separately in relevant item of this BOQ.
1
-
-
... More
All as per Sl item No 142.00 here in before but for 125 KVA to 200 KVA DG Set.
1
-
-
... More
Supply only super enameled copper wire of any size / gauge, or strips as required for rewinding of alternator of DG sets all as specified and as directed by Engr-in-Charge.
40
-
-
... More
S&F in repair AVR with functions to adjust generator output voltage, prevent voltage hunting, set under frequency roll off knee point, set generator drop to 5% at full load, match AVR input to accessory output, set the over excitation cut off level, set initial frequency related voltage dip, over-voltage protection cut off level, maximum short circuit current with sensing input voltage range 170 - 250 V AC max, 50 -60 HZ frequency with output max upto 120 V DC, continuous current 2.7A & transient 6A for 10 sec including necessary control wiring complete from alternator to AVR including testing & commissioning for DG sets of capacity 750 KVA complete all as specified and as directed by Engr-in-Charge.
1
-
-
... More
All as per Sl item No 145.00 here in before but suitable for 100 to 200 KVA DG Set.
1
-
-
... More
All as per Sl item No 145.00 here in before but suitable for 40 to 62.5 KVA DG Set.
2
-
-
... More
Cleaning of diesel tank of DG set of capacity 750 KVA carefully by draining out fuel in the tank including disconnection from fuel system, De-scaling the diesel tank with water pressure and removing the complete sludge deposited, drying the tank, repairing any leakage, cleaning and testing of fuel line up to fuel pump inlet complete all as specified and as directed.
1
-
-
... More
All as per Sl item No. 148.00 here in before but for DG Set of 200 KVA capacity
1
-
-
... More
All as per Sl item No. 148.00 here in before but for DG Set of 125 KVA capacity
1
-
-
... More
All as per Sl item No. 148.00 here in before but for DG Set of 40 to 62.5 KVA capacity
1
-
-
... More
S&F microprocessor based integrated power command controller suitable for DG set of capacity 750 KVA including taking down existing un-serviceable controller complete all as specified and as directed.
1
-
-
... More
All as per Sl item No. 152.00 here in before but for DG Set of 100 to 200 KVA capacity
1
-
-
... More
All as per Sl item No. 152.00 here in before but for DG Set of 40 to 62.5 KVA capacity
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%