Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Repair Maintenance To Flooring Including Head Wall From N8 To N13 At Naval Dockyard Visakhapatnam Under Ge (i) Dm Visakhapatnam in Visakhapatnam, Andhra Pradesh, with an estimated contract value of Rs. 1,48,52,000. The bid opening date for this tender is 31-10-2026 and the last date for bid submission is 28-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Military Engineer Services - MES Tender - AP Tender
Opening Date31 Oct 2026
Closing Date28 Nov 2026
Tender Amount₹ 1,48,52,000
Costs
EMD
₹ 2,23,520Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Repair Maintenance To Flooring Including Head Wall From N8 To N13 At Naval Dockyard Visakhapatnam Under Ge (i) Dm Visakhapatnam
Contact
Tender Id
2026_MES_792096_2Tender No
8699/C/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
M&L for 20mm thick cementitious flooring system after application of epoxy based bonding agent on the prepared jetty floor with Nitoflor Levelcrete of Fosroc make or make as approved by GE having a compressive strength of 40Mpa complete all as specified and directed.
1110
-
-
... More
Complete Removal of existing chemical painted surfaces by mechanical means upto the satisfaction as per directed by Engr-In-Charge
3600
-
-
... More
M&L for application of top wearing coat with the properties of Anti-skid, oil resistant, flexible & UV resistant coating system with the following laying methodology :- a) Application of two component Epoxy primer Notoprime 30 of Fosroc make or make as approved by GE mixed with mechanical mixer and applied on the Levelcrete surface by using sponge based epoxy roller followed by sprinkling of anti-slip grain No.2 of Fosroc make or make as approved by GE on the primed surface on wet condition for skid resistant and allow it to dry for 16-24 hours.
b) Application of two component prepacked protective system of Traffic guard Intermediate coat of Fosroc make or make as approved by GE mixed with mechanical mixer and applied on the anti-skid surface by using sponge based epoxy roller and allow it to dry for 16-24 hours.
c) Application of two component wearing coat, Trafficguard Wearing coarse of Fosroc make or make as approved by GE mixed with mechanical mixer and applied on the anti-skid surface by using sponge based epoxy roller and allow it to dry for 16-24 hours.
4710
-
-
... More
M&L for fixing injection grouting nozzle of suitable size and injecting grouting material, low viscosity epoxy based grouting material conbextra EP10 or make as approved by GE into the craces with pressure of 40 PSI mechanixcally including sealing the hole completely. Note :- Conbextra EP10 or make as approved by GE epoxy grouting material shall be measured and paid seperately.
15
-
-
... More
Supply and low viscosity epoxy based injection grouting material complete all as specified and directed.
6
-
-
... More
M&L for crack repairs by widening the cracks 0.25mm to 9mm wide, groove cutting to V shape in existing jetty slabs, cleaning out by removing loose particles by mechanical blower and application of Epoxy based primer Nitoprime 25 or make as approved by GE to the groove and allow it to dry and application of Epoxy putty Nito VF or make as approved by GE in the prepared groove after complete drying of the applied primer complete all as specified and directed.
55
-
-
... More
M&L for patch repair in concrete surfaces of any depth as required with shrinkage controlled polymer modified fibre reinforced cementitious patch repair mortar Renderoc SP40 of Fosroc make or make as approved by GE having a compressive strength of 45 Mpa over a coat of Nitobond SBR or make as approved by GE on the base surfaces includung taking out the old loose concrete complete all as specified and directed.
Note : 25 Kg of Renderoc SP40 bag of Fosroc make or make as approved by GE ready to use at site by mixing with water at 4.25 Ltr per bag shall be used for patch repairs in concrete.
9.5
-
-
... More
All as per item No. 6.00 above, but for traffic line marking 100 wide over finished flooring to the required length, colour and shapes for parking, safety markings on jetty, hard standings, roads etc.,
70
-
-
... More
M&L for preparation of construction joint grooves of size 25 mm X 20 mm, application of primer to the groove, inserting breaker rod in the groove and finally sealing the groove with Polyuretheane based flooring sealent Colpor 200 of Fosroc make or make as approved by GE and finishing complete all as specified and directed.
45
-
-
... More
M&L for forming Contraction (Dummy) jointes 30mm deep x 10mm wide, filled with sealing compound Grade A complete all as specified and directed..
30
-
-

