Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Repair / Maint Of Ht / Lt Distr System, Ug Cables, Transformers, Rmus, Vcbs, Calibration Of Relay And Repair / Maint Of Lt Panels, Ug Cable And Certain Allied Works At Inhs Kalyani Under Age E/m No-i Of Ge (u-i) Visakhapatnam in Visakhapatnam, Andhra Pradesh, with an estimated contract value of Rs. 40,00,000. The bid opening date for this tender is 27-05-2025 and the last date for bid submission is 17-06-2025. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Military Engineer Services - MES Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date27 May 2025
Closing Date17 Jun 2025
Tender Amount₹ 40,00,000
Costs
EMD
₹ 80,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_710543_1Tender No
8742/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
S&F spring charging universal motor with gear box 220V AC/DC of rating 400 to 1250A suitable for 11kV VCB including taking down existing un-serviceable spring charging universal motor with gear box complete all as specified and as directed.
1
-
-
... More
S&F LED indication lamps, 110 V of various colours including taking down existing un-serviceable LED indication lamps complete all as specified and as directed.
10
-
-
... More
S & F Epoxy Resin Spout bushings for busbar single pole R/B phase, 400-1250 Amps, suitable for 11KV VCB panel & of make as per OEM including taking down existing un-serviceable Epoxy Resin Spout bushings complete all as specified and as directed.
2
-
-
... More
All as per Sl Item No. 7.00 here in before but Y phase
1
-
-
... More
S & F Epoxy Resin Spout bushings for CT/PT/Circuit spout single pole R/Y/B phase, 400-1250 Amps, suitable for 11KV VCB panel & of make as per OEM including taking down existing un-serviceable Epoxy Resin Spout bushings complete all as specified and as directed.
2
-
-
... More
S&F closing coil assembly, 110V DC suitable for 11KV VCB & of make as per OEM including taking down existing un-serviceable closing coil assembly complete all as specified and as directed.
1
-
-
... More
S&F tripping coil 110V DC suitable for 11KV VCB & of make as per OEM including taking down existing un-serviceable tripping coil complete all as specified and as directed.
1
-
-
... More
S&F T‐N‐C Switch (Breaker Control Switch) for control switches & control wiring, suitable for 11KV VCB Panel & make as per OEM including taking down existing un-serviceable T‐N‐C Switch complete all as specified and as directed.
2
-
-
... More
M&L for cable route indicator for HT UG cable, made out of 2mm thick MS sheet in round shape of dia not less than 200mm, embossed with HT Cable on it, bolted with 2 nut of suitable size at top of 35 x 3 mm MS flat iron of length not less than 800mm, painting with 2 coats of synthetic enamel paint over a coat of primer & bottom of flat iron embedded in PCC 1:3:6 type C2 of size 200mm x 200mm x 300mm (400mm below ground level an 100mm above ground level), exposed surface of concrete painted with 3 coats of white wash including necessary earth work & taking down existing un-serviceable cable route indicator complete all as specified and directed.
5
-
-
... More
Labour only for identifying, diagnosing, tracing, checking & rectifying High Tension (11KV) faults, tracing location by meggering the lines, faults in panels, VCB`s, Transformers and other switchgears at any location, any time round the clock and rectifying it to restore the supply within time limit at various locations using appropriate fault locator, cable route locator etc complete all as specified and directed.
Note:- 1. All the activities to trace the fault, rectifying & restoring the supply shall be carried out within specific reasonable time as directed by the Engineer-in-charge. 2. The cost of required tools (T& P), minor items such as lugs, nuts, bolts, HT insulation tape and safety equipments required for the job shall deemed to be included in the unit rate quoted against this item & nothing extra shall be paid to contractor by the department on these ground.
3. Safety of manpower deployed for the job is contractor’s responsibility. In case of any accident / Fatal injury, contractor shall be held responsible to settle all claims and nothing extra shall be paid to the contractor on this account.
4. The cost of all manpower (any number) for the job is deemed to be included in the quoted unit rate.
5. The cost of Fault identification by use of fault locator (if needed) is catered in separate Items.
6. Minimum one VCB / RMU technician, one Transformer Technician & one cable Jointer must be available round the clock during rectification process of fault if respective fault occurs.
12
-
-
... More
M&L for detecting HT UG cable faults located in any stretch / depth with sophisticated cable fault locator consisting of microprocessor based pre-locator system, HV surge generator, fault pin point surge wave receiver, cable identification instrument , cable tracer for exact location of under ground cable routes complete all as directed.
Note:- The rate quoted deemed to be inclusive of arrangement of necessary fault locator equipment, transportation of equipment & charges for service engineer.
8
-
-
... More
All as per Sl Item No. 14.00 here in before but for LT UG Cable faults
12
-
-
... More
S&F 11 KV CT, epoxy resin cast, dry type, indoor, 200/100 (primary) -5 + 5 A (Secondary) , with core 1, class 0.5, core 2 class 5P10 for fixing with spout bushing including taking down existing un-serviceable CT complete all as specified and as directed.
1
-
-
... More
S&F 11 KV CT, epoxy resin cast, dry type, indoor, 100/50 (primary) -1 + 1 A (Secondary), with core 1, class 0.5, core 2 class 5P10 for fixing with spout bushing including taking down existing un-serviceable CT complete all as specified and as directed.
2
-
-
... More
M&L for inspection, testing, servicing and overhauling of Factory Made 11 KV, 400-800 Amps, SF6 Insulated, Motorized, Outdoor RMU, 21 kA for 3 Seconds, Consisting of any nos Incoming and any nos Outgoing Feeders including following complete all as directed by Eng-in- charge :-
(a) Preliminary inspection of 11 KV MV Switch gear for any defects. (b) Testing of CTs
(c) Servicing Switch gear panels :-
(i) Cleaning panel (ii) checking the condition of SF6 gas (iii) HV test.
Notes:-
(1) The GIS Switchgear servicing includes:- (a) Cleaning of GIS for dust, oxidising and decarburizing with CTC. (b) Repair/servicing of spring loaded operating mechanism. (c) Repair/servicing of spring charging motor. (d) Checking, repairing & servicing of gearbox, auxiliary switches, spring, limit switch etc complete. (e) Checking & repairing electrical and mechanical operations. (f) Lubrication all moving parts with petroleum jelly & cleaning all bushing insulators with CTC. (g) Tightening of all mechanical connections of mechanism. (h) Proper tightening all LV connection of VCB and cable chamber & allied connecting accessories. (2) The rate quoted shall be deemed to include for necessary T&P, nuts, bolts, washers, gasket, insulation tape, compound, painting of RMU panels with approved colour including lettering details all as per existing etc. (3) Major spares will be measured and paid separately under relevant items of BOQ, however the unit rate quoted against this item shall be deemed to include for any other minor spares requiring replacement.
1
-
-
... More
S & F circuit-breaker trip coil kit 24 Vcc/Vdc suitable for 11KV, 400 to 800 Amp RMU & of make as per OEM including taking down existing un-serviceable circuit-breaker trip coil kit complete all as specified and as directed.
2
-
-
... More
S & F circuit-breaker closing coil kit 24 Vcc/Vdc suitable for 11KV, 400 to 800 Amp RMU & of make as per OEM including taking down existing un-serviceable circuit-breaker closing coil kit complete all as specified and as directed.
2
-
-
... More
S&F motor for motorized mechanism 24 Vcc/Vdc suitable for 11KV, 400 to 800 Amp RMU & of make as per OEM including taking down existing un-serviceable motor complete all as specified and as directed.
1
-
-
... More
S & F flair 22D lithium dua Fault Passage Indicator (FPI) suitable for 11KV, 400 to 800 Amp RMU & of make as per OEM including taking down existing un-serviceable FPI complete all as specified and as directed.
1
-
-
... More
S & F VPIS Standard, 3.3 to 7.7 KV suitable for 11KV, 400 to 800 Amp RMU & of make as per OEM including taking down existing un-serviceable VPIS complete all as specified and as directed.
1
-
-
... More
M&L for taking down existing un-serviceable 11KV, 400 to 800 Amp RMU, transporting to workshop from sub station (OEM Factory), opening including filling of SF6 gas, re-assembling by authorised technical rep of OEM, bringing back to site safely and re-installing, testing and commissioning the same complete all as specified and directed.
Note:- The unit rate qouted against this items shall be deemed to include cost of transportation of RMU for both sides.
1
-
-
... More
Supply & filling SF6 Gas in circuit brekers / RMU, duly brought in cylinders filled with SF6 gas, having universal type valve outlet suitable for filling gas in circuit breakers. The SF6 gas shall be free from impurities and toxic contents as per the relevant IS specifications & there should not be any contamination or introduction of impurities from defective manufacturing process, leakage or contaminations from containing cylinders complete all as specified and as directed.
Note :- The empty cylinders shall be returned to contractor.
22
-
-
... More
S&F plug in type Bushings at cable termination chamber, make as per OEM suitable for 630 Amps RMU including taking down existing un-serviceable bushings complete all as specified and as directed.
3
-
-
... More
M&L for cutting the tarmac / hard standings in road and excavating trenches across the road in size not exceeding 0.45 m wide and 0.6 m depth for laying cable / cable protection pipe including refilling earth & making good top surface of the disturbed portion with 100mm thick PCC 1:3:6 (using 40mm graded stone aggregate) / bituminous mix as per existing & matching with the surroundings including removal of rabbish to distance not esceeding 100 m complete all as specified and directed.
8
-
-
... More
S&F 100 mm bore galvanised steel tubing, medium grade with necessary fittings, laid under road crossing, for cable protection including taking down existing un-serviceable pipe complete all as specified and directed.
10
-
-
... More
Supply & laying XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 11000 volts, Earthed, grade cross sectional area 185 Sqmm, 3 core, laid in trenches / duct / on pole including taking down existing un-serviceable cable complete all as specified and directed.
50
-
-
... More
Taking out existing un-serviceable XLPE Cable of any size in underground / alongwith pole or in any positon complete all as specified and as directed.
Note:- Excavation and earthwork (if required) shall be measured and paid separately.
1175
-
-
... More
Supply & laying LT XLPE insulated, armoured heavy duty electric cable with alumimium conductor, 1100 volts grade, cross sectional area 400 Sqmm x 3.5 Core, laid in trenches / passing through pipe / duct / on wall complete all as specified and directed.
100
-
-
... More
All as per Sl item No. 31.00 here in before but cross sectional area 300 Sqmm x 3.5 Core
135
-
-
... More
All as per Sl item No. 31.00 here in before but cross sectional area 240 Sqmm x 3.5 Core
100
-
-
... More
All as per Sl item No. 31.00 here in before but cross sectional area 185 Sqmm x 3.5 Core
90
-
-
... More
All as per Sl item No. 31.00 here in before but cross sectional area 150 Sqmm x 3.5 Core
150
-
-
... More
All as per Sl item No. 31.00 here in before but cross sectional area 95 Sqmm x 3.5 Core
150
-
-
... More
All as per Sl item No. 31.00 here in before but cross sectional area 50 Sqmm x 3.5 Core
200
-
-
... More
All as per Sl item No. 31.00 here in before but cross sectional area 25 Sqmm x 3.5 Core
100
-
-
... More
S&F 50 mm bore galvanised steel tubing, medium grade, inserting in trenchless boring holes under road crossing, for cable protection including taking down existing Un-serviceable G.I. pipe complete all as specified and directed.
Note:- Trenchless boring holes shall be measured & paid under separate item of work.
10
-
-
... More
All as per Sl item No. 39.00 here in before but 80 mm bore
10
-
-
... More
S & F synthetic rubber insulated mats 3 mm thick for voltage upto 33 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m including taking down existing mat complete all as specified and directed.
5
-
-
... More
S&F danger notice plate of size 25 x 20 cm & 1.6mm thick mild steel sheet, vitreous enameled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size for HT including dismantling existing notice plate compete all as specified and as directed.
5
-
-
... More
M&L cable jointing kit for 11 KV (Earthed) grade 3 core XLPE armoured aluminium conductor cable of size 120 to 185 sqmm for outdoor termination, heat shrink type joint complete with jointing material and accessories including taking down existing joint complete all as specified and directed.
Note:- (i) The cost of Disconnecting and reconnecting the cable with HT network is deemed to be included in the unit rate quoted against this item.
(ii) The cost of re-arranging the cable if needed is deemed to be included in the unit rate quoted against this item.
2
-
-
... More
All as per Sl Item No. 43.00 here in before but for indoor termination
4
-
-
... More
M&L cable jointing kit for 11 KV (Earthed) grade 3 core XLPE armoured aluminium conductor cable of size 120 sqmm to 185 sqmm for straight through, heat shrink type joint with jointing material and accessories including taking down existing one complete all as specified and directed.
Note:- (i) The cost of excavation is deemed to be included in the unit rate quoted against this item.
2
-
-
... More
M&L for isolating the HT supply of outdoor type transformer of capacity 200 to 1000 KVA, disconnecting HT and LT connections by opening clamps, bus bar extension and isolating the cables, keeping all the cables out from the HT/LT sides, physically checking of transformer for healthiness such as checking pressure release valve, oil condition etc. and performing transformer tests such as HV/LV megger test, ratio test, magnetic balance test, checking the lead condition from winding to bus rods, necessary soldering / jointing etc complete all as specified and as directed.
Note:-
(i) All testing shall be done in presence of Engr-in-Charge or his accredited rep and test reports shall be signed by contractor and Engr-in-Charge and kept on record.
(ii) If the transsformer found satisfactory then HT/LT connections, assembly etc shall be done by the contractor and transformer shall be charged. (iii) If the transformer fails in these tests then the contractor has to shift the transsformer for winding / overhauling which shall be measured and paid separately.
(iv) Cost of winding / overhauling if required shall be measured and paid separately.
4
-
-
... More
M&L for 6mm thick synthetic rubberized cork sheet gasket for top cover, HT/LT bushes for transformer of capacity 200 to 1000 KVA including tightening all the bushings and top cover to avoid any oil leakages including taking down existing un-serviceable gasket complete all as specified and directed.
6
-
-
... More
S&F off load tap changer assembly suitable for transformer of capacity upto 1000 KVA as per existing with 5 tapping position including opening top cover, conservator etc including taking down existing un-serviceable off load tap changer assembly complete all as specified and directed.
1
-
-
... More
Shifting of standby Transformer of any capacity from any sub station to within 5km, closing the transformers for loading into transporting vehicle with the help of crane, transportation to another site, unloading, including disconnecting and removing of existing faulty transformer and installation of standby transformer, making necessary HT/LT connections, earth connections and restoration of power supply including all T&P required complete all as specified and as directed.
2
-
-
... More
M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to earth lead of galvanised iron strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 connected to earthing test point including dismantling un-serviceable earthing complete all as specified and directed.
Note:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, Main earthing lead from earth electrode to test point upto 7.5 m length, 20 mm bore medium grade GI watering pipe, 40 mm bore GI medium grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.
5
-
-
... More
Supply and topping up of transformer oil with di-electric strength not less than 60 KV in 2.5mm rod gap into the conservator tank / body tank of the transformer / OCB / FRMUs etc at various locations complete all as directed by the Engineer-in-Charge.
950
-
-
... More
Filtration of transformer oil of transformers / FRMUs installed at various locations to achieve di-electric strength not less than 60 KV at 2.5mm gap as per relevant IS with portable filtration plant, testing of the oil for the di-electric strength before filtration and after filtration complete all as directed by the Engineer-in-Charge.
2150
-
-
... More
S&F brass spindle / studs for terminal on HT side threaded complete with nut, washers etc of suitable dia for transformer capacity of 100 - 400 KVA including taking down existing un-serviceable spindlecomplete all as directed by the Engineer-in-Charge.
1
-
-
... More
All as per Sl item No. 53.00 here in before but suitable for 500 to 1000 KVA transformer
1
-
-
... More
All as per Sl item No. 53.00 here in before but suitable for on LT side
1
-
-
... More
All as per Sl item No. 53.00 here in before but suitable for 500 to 1000 KVA transformer on LT side
1
-
-
... More
M&L of silica gel breather assembly complete suitable for 200 to 400 KVA transformer as per existing with breather unit and silica gel including connecting with proper necessary gaskets if necessary & taking down existing un-serviceable breather assembly complete all as specified and as directed.
1
-
-
... More
All as per Sl item No. 57.00 here in before but suitable for 500 to 1000 KVA transformer
1
-
-
... More
Supply and replacement of silica gel in breather of transformers all as specified and as directed.
2
-
-
... More
S & F HT bushings made out of porcelain, as per existing and suitable for distribution transformer of capacity 100 to 400 KVA including dismantling existing un-serviceable bushing complete all as specified and as directed.
1
-
-
... More
All as per Sl item No. 60.00 here in before but suitable for 500 to 1000 KVA transformer
1
-
-
... More
S & F LT bushings made out of porcelain, as per existing and suitable for distribution transformer of capacity 100 to 400 KVA including dismantling existing un-serviceable bushing complete all as specified and as directed.
2
-
-
... More
All as per Sl item No. 62.00 but suitable for 500 to 1000 KVA transformer
2
-
-
... More
M&L for preparation of old exposed painted surfaces of indoor / outdoor type transformer of capacity 200 to 400 KVA and painting the same with two coats of synthetic enamel paint including writing details of transformer on transformer plinth / base with white synthetic enamel paint on black synthetic enamel paint back ground complete & including one coat of white wash on exposed surface of transfomer plinth / base complete all as specified and as directed.
Note :- Colour of paint shall be as decided by Engr-in-Charge.
2
-
-
... More
All as per Sl item No. 64.00 but suitable for 500 to 1000 KVA transformer
2
-
-
... More
S&F gun metal drain valves suitable for transformer of capacity 100 to 1000 KVA including taking down existing un-serviceable valve complete all as specified and as directed.
2
-
-
... More
M&L for removing electrical connections of 3 / 4 pole Air circuit breaker of capacity 400 to 1600 Amps, 415 V, 50 HZ of any make L&T / C&S / GE / ABB, strip opening of the ACB, inspecting the parts for serviceability / overhauling complete and carrying out following repairs / maintenance :- a) Cleaning insulation parts including bushings with CTC solution.
b) Checking alignment and condition of movable and stationary contacts and adjust them all as per manufacturer's instructional manual.
c) Checking the bolts, nuts, washers, cotter pins and all terminal connections are in place and tight, replacing worn-out parts.
d) Checking arc chutes for damage and replacing damaged parts.
e) Cleaning and lubricating the operating mechanism with light machine oil (SAE-20 or 30) for pins and bearings and with a non-hardening grease for wearing surfaces, adjusting breaker operating mechanism all as per manufacturer's instructional manual, replacing the same if there is excessive wear and tear.
f) Checking / inspecting shunt trip coil for serviceability and replacing the same if required. g) Replacing worn or burned contacts, Checking control device free for operation.
h) Checking after servicing the circuit breaker to verify the contacts move to the fully opened and fully closed positions, that there is an absence of friction and that the electrical operation is functional.
Note : (i) The rate quoted deemed to be inclusive of T&P and minor spares like lubricants, nuts / bolts / washers / pins etc.
(ii) Major spares like contacts, shunt trip coil, relays, CTs etc if replaced, shall be measured & paid separately.
5
-
-
... More
S & F under voltage / trip/closing contact coil / auxiliary contact block make as per OEM suitable for air circuit breakers of capacity 400 to 1600 Amps including taking down existing unserviceable coil complete all as specified and directed.
2
-
-
... More
S & F Arc chutes (for 415 V) make as per OEM suitable for air circuit breakers of capacity 400 to 1600 Amps including taking down existing unserviceable Arc chutes complete all as specified and directed.
2
-
-
... More
S & F shunt release (110 / 220 V DC or 240 / 415 V AC) make as per OEM suitable for ACB of 400 to 1600 Amps capacity including taking down existing unserviceable shunt release complete all as specified and directed.
2
-
-
... More
S & F arcing contacts (fixed/ moving) make as per OEM suitable for ACB of 400 to 1600 Amps capacity including taking down existing unserviceable arcing contacts complete all as specified and directed.
2
-
-
... More
S&F cubical type LT panel board, outdoor type, factory made from CPRI approved factory, made out of 3.15 mm thick CRCA steel sheet and including MS angle iron 50 x 50 x 6 mm frame work, legs 0.6 m long, MC 100 channel base, totally enclosed, dust & vermin proof using neoprene rubber gasket (IP-54), double leaf door shutter in front side and single leaf shutter in rear side fixed with hinges having necessary locking arrangement in both front and rear door, with four side projected slanting roof, provided with louvers for ventilation / heat dissipation, duly powder coated of approved shade over a coat of red oxide primer both internally and externally and including mounting on PCC platform made out of PCC 1:3:6, 150 mm thick (100 mm below & 50 mm above GL) all round the panel board and including necessary earth work.
(Contd...)
1
-
-
... More
The panel board shall be suitable for operation on AC 415 Volt, 3 Phase, 50 Hz, 4 wire system and shall have aluminium bus bar of 600 Amps capacity with colour insulating tape / sleeves mounted on suitable size "F" class, non hygroscopic, non combustible insulators, provision for fixing MCCBs / MCBs, necessary inter-connections with bus bar / strip with colour code insulation, including LED indicating lamps (R, Y, B), digital voltmeter with CT / PT & ammeter of suitable capacity with selector switches, provision of cable entry / exit provided in bottom, connections of all outgoing / incoming, existing / new copper wires of required size (minimum 2.5 sqmm) with following accessories and including taking down existing LT Panel and acessories inside complete all as specified and directed:-
Incoming :-
(i) ACB 4 pole 630 Amp, 35 KA, Ics = 100%, thermal magnetic release manual draw out type - 01 No
Outgoing :-
(i) MCCB 4 pole 400 Amp, 25KA, fixed type including spreader link - 01 No
(ii) MCCB 4 pole 250 Amp, 25KA, fixed type including spreader link - 02 Nos
(iii) MCCB 4 pole 100 Amp, 25KA, fixed type including spreader link - 01 Nos
(iv) Aluminium Busbar of 600 Amp incl PVC sleeves for 3 Phase with neutral supply - 01 Set
(v) 3 phase VAF + PF digital meter consisting of ammeter, voltmeter, frequency meter, PF, Cl 1 alongwith suitable CTs - 01 Set
-
-
-
... More
M&L for preparation of external surfaces of LT panels indoor/outdoor type by scraping down old dusted paint by steel brush, brooming, rubbing and cleaning including spray painting with two coats of synthetic enamel paint over a coat of red oxide primer as approved and marking feeders by Engineer-in-Charge.
15
-
-
... More
M&L for decarburizing / cleaning complete LT 415 Volts 3 phase panel / bus bar chamber with electrical connections, bus bar, cleaning with CTC and ensure proper decarburizing, re-fixing the same after applying becktol Red solution to the bus bar insulator & checking all the connections, tightening the nuts, bolts & thimbles of incoming / outgoing system complete including replacement of defective rusted bolts & nuts all as specified and directed.
5
-
-
... More
M&L for disconnecting electrical connection of defective / burnt out UG LT cable of any size & 2 to 4 core from main switch / DB / Junction box / LT Panels, excavating & taking out the required length of existing cable from loop, cutting the defective portion of old cable termination at end, providing new aluminium thimbles / lugs of suitable size and reconnecting the same with existing location and refilling of cable trench with existing sand and bricks complete all as specified and as directed.
Note (i) The cost of required earth work i.e. excavation, returning filling, relaying of sand and bricks and cost of drawing the required length up to loop and the required work to match the existing surface is deemed to be included in the unit rates quoted against this item and nothing extra shall be paid to contractor on this account.
(ii) Additional cable/protection pipe required at site if any shall be measured and paid separately.
25
-
-
... More
M&L including replacement of out door panel board canopy door, made out of 2.00 mm thick CRCA sheet, duly power coated with removable door hinges, water proof rubber beading and locking arrangement with SS aldrop & pad lock/ concealed locking arrangement, danger notice boards, mentioning panel details including gas welding for fixing the door complete all as directed.
Note:- Unit rate quoted shall be considered to include locking arrangement with SS aldrop & pad lock/ concealed locking arrangement, danger notice boards, etc reqd for one LT panel. Contactor shall quote their rates accordingly.
1
-
-
... More
S&F in repair MCCB 4 pole 400 Amp, breaking capacity 35 kA, Ics = 100% Icu, thermal magnetic release type with adjustable overload setting (0.8-1.0 ln), adjustable short circuit setting (6-10 lr) including necessary modification in the panel & taking down existing un-serviceable MCCB complete all as specified and as directed.
2
-
-
... More
All as per Sl item No. 77.00 here in before but 250 Amp, breaking capacity of 25 KA
2
-
-
... More
All as per Sl item No. 77.00 here in before but 200 Amp, breaking capacity of 25 KA
2
-
-
... More
All as per Sl item No. 77.00 here in before but 160 Amp, breaking capacity of 25 KA
2
-
-
... More
All as per Sl item No. 77.00 here in before but 100 Amp, breaking capacity of 25 KA
2
-
-
... More
Re-laying only old servicable (cable obtained from taking out old cable here-in-before after checking the fault) UG LT XLPE electric cable with alumimium conductor, 1100 volts grade of any size, laid in trenches / duct / on pole complete all as specified and directed.
Note:- Excavation and earthwork (if required) shall be measured and paid seperately.
150
-
-
... More
M&L straight through cable joint kit, heat shrinkable type complete with jointing materials and accessories, suitable for 1.1 KV, 3.5 core XLPE aluminium conductor cable of size 240 Sqmm including taking down existing un-serviceable joint kit complete all as specified and directed.
2
-
-
... More
All as per Sl Item No. 83.00 here in before but suitable for cable of size 3.5 core 150 to 185 Sqmm
2
-
-
... More
All as per Sl Item No. 83.00 here in before but suitable for cable of size 3.5 core 90 to 120 Sqmm
2
-
-
... More
All as per Sl Item No. 83.00 here in before but suitable for cable of size 3.5 core 25 to 70 Sqmm
1
-
-
... More
Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all excavated material in soft / loose soil complete all as specified and directed.
189
-
-
... More
Returning, filling in trenching with soil and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.
110
-
-
... More
Removing of excavated surplus soil to a distance n. exc 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.
79
-
-
... More
M&L sand cushioning with clean crushed stone dust in trenches for protection of UG cable and including punning down complete all as specified and directed. Note:- Punned thickness of stone dust coushioning shall only measured and paid.
56.7
-
-
... More
Supply & laying sub class 'B', class designation 75 bricks of old size, laid over sand cushioning along alignment of cable as protection to cable in trenches including taking out old bricks complete all as specified and directed.
Note : Sand cushioning will be measured and paid separately.
4500
-
-
... More
Supplying and laying un-reinforced precast concrete cable cover, class HV, Type 1, flat, of size 300mm X 180mm X 40mm, laid along alignment of cable as protection to cable in trenches including taking out existing un-serviceable cable covers complete all as specified and directed.
200
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%