Military Engineer Services Tender

Periodic Supply of Hand held Grass cutting Machine of Make Honda or equivalent with Machine operator and one Helper for Cutting and Sweeping Grass after cutting of Grass, bushes, small plants of any type along the sides of Dispersal Area, Taxi Track, Runway, Shoulders and Airfield areas throughout the year, including supply of Fuel, lubricants, spares, renewal of blades as required including maintenance and repairs to Machine and trade insurance and license fees including removing of debris to a distance exceeding 250m but not exceeding 500m from the site complete all as directed. Note: [a] Area shall be as decided by the Engineer-in-Charge and representative of users. [b] One No. of Hand held Grass cutting Machine shall be made available at all times at site and the same may be increased to required numbers as per site requirement. [c] An area of 1000 Square Metres shall be treated as One Job for measurement and payment purpose irrespective of the Plant, Machinery and Manpower employed for each job. [d] The work is required to be executed along Main/Secondary Runway. Therefore, the work shall be executed during non-flying hours either during Day or Night without causing any disturbance for flying. [e] The work is required to be executed in highly restricted area. [f] Proper safety arrangement, equipment shall be provided by the contractor for workmen. [g] The rate quoted shall be deemed to be considering all the above provisions and nothing shall be paid extra on this account.

Removing silt, grit, mud and other materials from drains of any description in foul condition including removing materials / debris to a distance exceeding 250m but not exceeding 500m complete all as directed. Note: [a] Area shall be as decided by the Engineer-in-Charge and representative of users. [b] The work shall be carried out using Tata Hitachi EX 60 / 70 / 100 Excavator or any other Machinery as required at site. [c] Tata Hitachi EX 60 / 70 / 100 Excavator including Operator for Eight Hours per Day shall be treated as One Job. [d] Proper care shall be taken while removing the silt, grit, mud and other materials to avoid any damage to the existing underground cables and pipelines etc. Damage if any occurs to the underground cables and pipelines, the same shall be made good immediately to match the existing and to restore the services and rate quoted is deemed to be including the same. [e] The work is required to be executed along Main/Secondary Runway. Therefore, the work shall be executed during non-flying hours either during Day or Night without causing any disturbance for flying. [f] The work is required to be executed in highly restricted area. [g] Proper safety arrangement, equipment shall be provided by the contractor for workmen. [h] The rate quoted shall be deemed to be considering all the above provisions and nothing shall be paid extra on this account.

Grading and Levelling of the area around the Runways and Taxiways in the Airfield by deploying One Tractor Dozer with ploughing set and One chain saw cutting machine including Operators and One helper per Day including removing materials / debris to outside MD land complete all as directed. [a] Area shall be as decided by the Engineer-in-Charge and representative of users. [b] One Tractor Dozer with ploughing set and One chain saw cutting machine including Operators and One helper for Eight Hours per Day shall be treated as One Job. [c] Proper care shall be taken while removing the silt, grit, mud and other materials to avoid any damage to the existing underground cables and pipelines etc. Damage if any occurs to the underground cables and pipelines, the same shall be made good immediately to match the existing and to restore the services and rate quoted is deemed to be including the same. [d] The work is required to be executed along Main/Secondary Runway. Therefore, the work shall be executed during non-flying hours either during Day or Night without causing any disturbance for flying. [e] The work is required to be executed in highly restricted area. [f] Proper safety arrangement, equipment shall be provided by the contractor for workmen. [g] The rate quoted shall be deemed to be considering all the above provisions and nothing shall be paid extra on this account.

Rolling and compacting of the area around the Runways and Taxiways in the Airfield by deploying One Road Roller of Capacity 8 to 10 tones including Operators and two Un-skilled labours for cleaning of areas for Eight Hours per Day including removing materials / debris to outside MD land complete all as directed. [a] Area shall be as decided by the Engineer-in-Charge and representative of users. [b] One Road Roller including Operators and two Un-skilled labours for Eight Hours per Day shall be treated as One Job. [c] Proper care shall be taken while rolling the soil to avoid any damage to the existing underground cables and pipelines etc. Damage if any occurs to the underground cables and pipelines, the same shall be made good immediately to match the existing and to restore the services and rate quoted is deemed to be including the same. [d] The work is required to be executed along Main/Secondary Runway. Therefore, the work shall be executed during non-flying hours either during Day or Night without causing any disturbance for flying. [e] The work is required to be executed in highly restricted area. [f] Proper safety arrangement, equipment shall be provided by the contractor for workmen. [g] The rate quoted shall be deemed to be considering all the above provisions and nothing shall be paid extra on this account.