Military Engineer Services Tender
... More
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date5 Mar 2025
Closing Date16 Apr 2025
Tender Amount₹ 3,15,00,000
Costs
EMD
₹ 3,90,000Document Cost
₹ 2,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_700300_1Tender No
CA NO. CE (CG)/VIZ/MDP/TOKEN /21 OF 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
M&L for Epoxy Jointing Compound: Clean the concrete surface, remove the loose particle, if any. Make sure that the form work is ready for positioning. Mix the base and hardener of the epoxy resin jointing compound and apply the same to the prepared surface. Care should be taken that the micro concrete need to be done within 5 hour’s maximum from the time of application of epoxy jointing compound Nitobond EP of Fosroc or equivalent.
Note: The quoted rate shall include the cost of all the operations as per manufacturers specification and as directed.
827
-
-
... More
M&L for Polymer Modified Mortar: Chip off the corrosion damaged areas on the RCC structural members. Clean reinforcement using Reebaklens RR of Fosroc or equivalent and make sure that there are no traces of rust on the surface of existing rebars. Check for the depth of carbonation using the phenolphthalein indicator and make sure that the contaminated concrete is removed completely. Wet the surface with potable water and make sure that the surface is kept moist so that the water cement ratio in the polymer modified mortar is maintained. Supply and application of Nitobond SBR or equivalent soon after the finishing is over complete all as directed. Note:The quoted rate shall include necessary scaffolding and platform and cost of all the operations as per manufacturers specification and as directed.
827
-
-
... More
M&L for Curing Compound: Immediately after striking the form work or after completion of the repair works, the surface should be sprayed with water once and followed by application of membrane based curing compound like Concure WB of Fosroc or equivalent diluted with water in the ratio of 1: 1 as a curing membrane - Complete.
845
-
-
... More
Removal of brick jelly from Sunken portion: Remove the existing tiles, brick jelly and bed mortar and expose up to the parent concrete slab. Check for cracks, if any, and if so pressure grout the same and close the crack using polymer modified mortar. Acid wash and water wash the surface and allow the surface to dry including the disposal of debris out side MD land complete all as directed.
302
-
-
... More
M&L for Drilling & fixing of Nozzle: Identify the point to be grouted and care to be taken to drill at the horizontal and vertical joint along the other weak points. Drill holes of 19mm dia holes to depth of abut 75mm. Fix the PVC nipple using rapid setting compound like Rendroc Plug of Fosroc or equivalent. Allow it to set complete all as per manufacturers instructions and as directed.
523
-
-
... More
M&L for injection of Microfine cement: Prepare the micro fine cement slurry by adding the micro fine cement with water with minimum of 0.5 water cement ratio. Mixing to be done mechanically and expandable grout additive like Cebex 100 of Fosroc or equivalent at 225 gms per bag of cement need to be added to compensate the shrinkage. Inject the same using a positive displacement pump until the nipple refuses the grout or the grout comes out in the nearby points. Cut the nipple and finish the same using polymer modified mortar - complete all as per manufacturers specification.
235
-
-
... More
M&L for Water Proofing treatment to toilets: All the surfaces which are to receive the water proofing coating like Brush bond of Fosroc or equivalent, must be free from dirt or any other form of foreign matter which might affect adhesion. Acid wash and water wash the surface and allow the surface to dry condition. Mix the part A and part B of the polymer modified cementitious coating mechanically using an electrical operated drilling machine fitted with mix paddle. Apply the same in two coats over the prepared surface one after the other dries up with a minimum interval of 4 hours between the coats. Providing pressure grouting in all the vertical and horizontal joint including the suspected areas.
129
-
-
... More
S&F Relaying of Tiles: Prepare bed mortar with CM 1:6 added with waterproofing liquid like Conplast X 421 IC of Fosroc chemicals or equivalent at 150ml per bag of cement. Prepare cement slurry and pour the same on the surface as cement punning. Place the vitrified tiles of approved make and size followed by release of entrapped air. Fill the tile joint with polymer based tile filling compound – complete. The rate shall include the cost of all the operations and etc complete
114
-
-
... More
Additional Reinforcement: Check the diameter of the existing rebars and if the diameter is less than 30% of the original diameter, provide additional reinforcement. Cut the required bars as main reinforcement to the required length with proper development length. Tie them to the prefixed shear connectors so that the additional rebar acts monolithically with the existing ones and core concrete. In the case of the shear reinforcement also, if the diameter of the rebars are reduced, provide 8mm dia stirrups in the form of 2 "U" shaped bars. Tie them properly so that it has a tight contact with the main bars. The rate shall include the cost of all the operations and etc complete
114
-
-
... More
Shear Connectors: Drilling 12mm dia holes up to a depth of 75mm maximum and fixing 8mm dia L shaped anchor rods as shear connectors at every 300mm c/c on the surfaces of the columns/beams or any other structural member as the case may be. Clean the same using water and make sure that there are no fine particles present in the hole. Mix the base and hardener of the polyester resin with the spatula thoroughly. Fill the drilled and cleaned holes to a minimum depth of 1/3rd of the hole with the prepared polyester resin. Make sure that the resin has reached till the end of the hole. At this stage push the shear connector gently in to the hole and finish the excess resin which comes out of the hole and allow the shear connectors not to be disturbed for minimum 20 minutes - complete. The rate shall include the cost of all the operations and etc complete
74
-
-
... More
Core Cutting: Mark the core holes along the beam to facilitate for the pouring of micro concrete. The core cutting need to be done with an electrically operated core drilling machine fitted with diamond tool of dia not less that 69 mm and to the entire depth of the slab portion. Care to be taken to minimize the cutting of the rebar as reinforcements are expected at the negative bending moment zone
6
-
-
... More
Formwork: Centering and shuttering including strutting, propping, etc, as per the required line and length at all different floor levels as per the standard specification-complete. Form work should be rigid to prevent loss of grout or mortar concrete from concrete at all stages & appropriate to the methods of placing & compacting as per standard specification. It should be made of suitable material i.e., steel plain sheet /plate, timber, plywood, plastic depending upon the type of finish specified. Note;-The rate shall include the cost of all the operations and etc complete
18
-
-
... More
M&L Micro- Concrete(i.e Make:Fosroc (Rendroc RG)/or equivalent) Cementious material using with (12.5mm graded aggregate) Stock sufficient quantity of micro concrete and 12mm down graded chips on site to enable the completion of the pouring in a continuous operation. An approved concrete mixer or a slow speed heavy duty drilling machine fitted with mixing paddle shall be used. Mix the micro concrete and the 12mm down grade chips in the ratio of 1: 0.5 by weight with required quantity of water as per the data sheet and place the same to the prefixed formwork well before the epoxy jointing compound dries up. Remove the formwork after 24 hours in the case of columns and after a period of 72 hours in the case of slab and beam and check for any surface defects and if so apply the polymer modified mortar - complete. Note;-The rate shall include the cost of all the operations and etc complete.
1
-
-
... More
Demolition RCC of any description and in any position not otherwise specifically provided for all as specified and as directed.
2.84
-
-
... More
Separating, scraping and cleaning of reinforcement (Demolition of concrete measured separately) and stacking etc complete all as directed.
4.26
-
-
... More
M&L for form work to sides of concrete foundations, footings, bases of columns and plinth beams and similar work, complete for flat and rough finished concrete surfaces all as directed.
10.8
-
-
... More
M&L for RCC (1: 1.5 :3) type B1, (using 20 mm graded stone aggregate) as in foundations, footings, foundation beams; plinth beams; bases for columns, etc.. complete all as directed.
1.62
-
-
... More
M&L for form work to sides of columns, square, rectangular for rough finished concrete surfaces complete all as directed.
1.62
-
-
... More
M&L for RCC , (1: 1.5 :3 ), type B1(using 20 mm graded stone aggregate) as in column etc. complete all as directed .
5.4
-
-
... More
M&L for form work to sides and soffits of roof beams, lintel beams etc. including supports, overhangs, etc. also splays between floors and beams, etc. for flat and rough finished concrete surfaces complete all as directed .
10.8
-
-
... More
M&L for RCC , (1: 1.5 :3), type B1 (using 20 mm graded stone aggregate) as in lintel beams, roof beams, cantilevers etc. complete all as directed.
1.62
-
-
... More
M&L for form work to chajjas, including edges, for flat and rough finished concrete surfaces complete all as directed
1.2
-
-
... More
M&L for RCC, (1: 1.5 :3 ) type B1 (using 20 mm graded stone aggregate) as in chajjas etc. complete all as directed by Engr-in-Charge.
0.1
-
-
... More
M&L for Formwork to soffit of suspended slabs such as roof slabs floor slabs, landings and similar works not exc 200 mm thick (Horizontal or sloping) for flat and rough finished concrete surfaces complete all as directed
12.96
-
-
... More
M&L for Formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide. for flat and rough finished concrete surfaces complete all as directed
1.8
-
-
... More
M&L for RCC , (1:1.5 :3) type B1 (using 20 mm graded stone aggregate) as in slab supported on walls, beams and columns in roofs etc. complete all as directed
1.62
-
-
... More
Removing building materials, demolitioned debris etc. (other than spoil payable under items 03028 to 03031 in Section-3 Earthwork) to a distance of 100m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination
55.2
-
-
... More
Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each complete all as specified.
131
-
-
... More
Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified..
193
-
-
... More
Taking down Shutter of any description exc 2 sqm & refixing in same opening complete all as specified.
5
-
-
... More
Taking down shutters of any description exc 1 sqm and not exc 2 sqm each and refixing in the same opening complete all as specified.
65
-
-
... More
Taking down shutter of any description .exc 1.0 Sqm and not exc 2 .0sqm complete all as specified.
20
-
-
... More
S&F Solid PVC door frame of size 50x47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing as per specification.
140
-
-
... More
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail either side & as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame at site as per specification & drawing.
60
-
-
... More
S&F PVC door frames (single rebated) of size 60mm x 30 mm made out of solid PVC fram with homogenous fine cellular structure having smooth outer integral skin with suitable metal CSK screw complete all as specified and directed.
20
-
-
... More
S&F factory made solid PVC profile panel door shutter 28mm thick (style) with internal skin as frame and 3 mm thick pressure compact laminate on both sides of approved color as infill with C channel type GI or 40x20x19 mm of MS pipe as stiffener complete.
15
-
-
... More
S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, including making good disturbed surfaces of wall complete all as specified and directed.
3.75
-
-
... More
S&F 35mm thick second class hard wood, Plain, framed, paneled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, sizes of members of shutters as specified in SSR part-I section 8 clause 8.24 supplied and fitted to chowkats complete all as specified.
211.44
-
-
... More
S&F 35mm thick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze,etc (without sash bars),edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat.
71.64
-
-
... More
S&F 30mm thick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze,etc (without sash bars),edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat.
5
-
-
... More
S&F 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, both faces is covered with decorative face veneer with lipping/frame to match on both sides.
161.19
-
-
... More
M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description any description and girth, not otherwise described, and treated with tar or coal tar black paint each and treated with tar or coal tar black paint.
56.25
-
-
... More
M&L for PCC (1:3:6), type C-1 (using 20mm graded stone aggregate) embedded in hold fasts etc including necessary form work complete all as specified and directed .
15.03
-
-
... More
Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each
80
-
-
... More
M&L for Forming jambs etc built in cement mortar 1:6 to openings incl cutting toothing and properly bonding into old work also facing ,jointing and pointing to match to existing work complete all as specified.
57.5
-
-
... More
M&L for Cutting holes in brick wall exc half bricks but not exc one brick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified.
540
-
-
... More
M&L for Providing and fixing factory made uPVC Exc 2.0 Sqm white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated),steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.
(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor
payment purpose.)
135
-
-
... More
All as per item No.50 above but not exc 2.0 Sqm
180
-
-
... More
S&F Powder coated aluminium window , ventilator etc fixed / sliding or pull and push type in shutter frames or shutters with two/three track sliding aluminium frame of Jindal /Hindalco (or) Equivalent make of approved size, including necessary joining cleats, glazing clips,powder coated aluminium snap beading, screws, including necessary anodised aluminium fittings like handles etc complete fixed in repairs all as per manufacturers instructions.
Note: EPDM Rubber beading/gasket measured and paid separately.
160
-
-
... More
S&F EPDM Rubber beading around glass in aluminium windows /ventilator shutters.
130
-
-
... More
S&F Powder Coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and as directed.
75
-
-
... More
S&F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane complete all as specified and as directed.
18.24
-
-
... More
Supply only 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.
130.68
-
-
... More
M&L for 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to frame work complete all as specified and directed .
12
-
-
... More
S&F Aluminium alloy wire cloth,0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire taples
45
-
-
... More
S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
110
-
-
... More
S&F 100mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and as directed.
10
-
-
... More
S&F 150mm Extruded aluminium alloy handle all as specified and as directed
350
-
-
... More
S&F aluminium, anodised, barrel tower bolt of extruded section, 150 mm long, complete all as specified and as directed
220
-
-
... More
S&F aluminium, anodised, barrel tower bolt of extruded section, 200 mm long, complete all as specified and as directed
130
-
-
... More
S&F butt hinges 100mm size extruded Alu. alloy with galvanised mild steel hinge pin anodised and fixed type C-21 Specified and directed.
525
-
-
... More
S&F butt hinges 125mm size extruded Alu. alloy with galvanised mild steel hinge pin anodised and fixed type C-21 Specified and directed.
25
-
-
... More
S&F Aluminium alloy, anodised, sliding door bolt 250mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified.
175
-
-
... More
S&F hydraulically regulated extruded aluminium body door closer designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 Kg etc complete all as specified and directed.
10
-
-
... More
S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.
175
-
-
... More
S&F as in repairs aluminium, anodised, barrel tower bolt of extruded section, 150 mm long, complete all as specified and as directed
20
-
-
... More
S&F as in repairs aluminium, anodised, barrel tower bolt of extruded section, 200 mm long, complete all as specified and as directed
20
-
-
... More
S&F as in repairs 150 mm long extruded, aluminium alloy anodised handle, fabricated type, complete all as specified and as directed
20
-
-
... More
Demolished Reinforced Concrete of any description and in any position not otherwise specifically provided for.
6
-
-
... More
M&L for Providing precast Reinforced cement concrete(1:2:4), Type B-1 (using 20mm graded stone aggregate) set in Cement Mortar in (1:6) ( in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, shelves and similar articles with plain/Chamfered faces all as specified and directed.
Note: Reinforcement will be measured and paid separately.
6
-
-
... More
M&L for Providing precast cement concrete (1:2:4) Type B-0 (using 12.5mm graded stone aggregate ) using CM(1:4) louvers and jallies, 50 mm thick (measured solid), including all mouldings but excluding frame (Pre cast frame shall be measured and paid separately.
40
-
-
... More
S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
2860
-
-
... More
S&F Mild steel TMT bars 6mm to 8mm dia and over cut to length, bent to shape required including cranking, bending spirally or hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc.
500
-
-
... More
All as per item No.76 above but 5mm dia and over upto and including 10mm dia in stirrups spacers and binders.
1500
-
-
... More
S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders;framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
1800
-
-
... More
S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165
250
-
-
... More
M&L for Excavation in treches n exc 1.5 m wide and n exc 1.5 m in depth; for foundation etc,n exc 10 sqm on plan and n exc 1.5 in depth and getting out in soft/loose soil complete all as specified
4.32
-
-
... More
Excavation in post holes (or similar holes) each n exc 0.50cum, getting out, returning, filling, in and ramming earth or broken rubble mixed with earth around in layers n.exc. 25cm, watering and removing surplus soil to distance n exc 50 m and making good surface as in Soft /loose soil.
4
-
-
... More
M&L for PCC1:3:6, type C-2(using 40mm graded stone aggregate) as in posts etc all as specified.
1.3
-
-
... More
M&L for Plain cement concrete (!:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundation filling as mass concrete complete all as specified.
1.08
-
-
... More
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n.exc. 15 cm thick, spread, leveled and reamed including watering, complete all as directed
9.08
-
-
... More
M&L for Hardcore of Broken stone or boulders guage exc 63mm but n exc. 100 mm, deposited, spread and leveled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface
3.71
-
-
... More
M&L for PCC 100 mm thick, type D-2, 1:4:8 (40mm graded aggregate) as in sub-base, complete all as directed.
24.75
-
-
... More
M&L for 100 mm thick PCC, type B-1, 1:2:4 (20mm graded stone aggregate) as in flooring in , surface finished Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.
24.75
-
-
... More
S&F rolled mild steel section of grade FE-410W (Gde E 250 quality A ) as in steel post/pillars of any shape (rectangular /circular/ square where connected to roof/ truss etc fixed with angle cleat, base plate etc
75
-
-
... More
S&F rolled mild steel (Fe 410 -W (Gde E- 250) quality A ) as in roof trusses, ( framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing ( Beam, tee,angle,channel or flat sections ) including distance pieces , cleats etc. conforming to Fe-410-W (Gde E-250) quality A.
100
-
-
... More
S&F rolled mild steel plates FE-410W (Gde E 250 quality A ) ( plain or chequered ) channels, square cut or notched (ordinary and counter sunk) forming holes all as specified and directed.
50
-
-
... More
S&F Pre painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.
30
-
-
... More
S&F 0.71 mm thick Precoated colour or mill finish Aluminium Ridges plain (500-600mm) of alloy IS designation 31500, Aluminium Alloy (AA) 3004 (ISO designation). For colour, coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/ tapping SS screws of size M6, 60 mm long with 3 mm EPDM seal and SS plain washer
5
-
-
... More
Dismantling of existing roof treatment with tiles etc any description and any thickness upto PCC padding complete including removal of debris away from the site complete all as specified and directed.
1350
-
-
... More
M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in padding, slope correction, roof kebs or mud stops, rounded or chamfered on edges for exposed to weather and cleaning by wire brushes etc complete all as specified and directed
40.5
-
-
... More
M&L for tack coat of industrial bitumen 85/25 @ 1.20 Kgs per Sqm over a coat of bitumen primer @ 0.30 litre per Sqm including preparation of roof surfaces complete all as specified and directed.
1350
-
-
... More
M&L for 10 mm thick screed bed or bedding layer of mortar in CM(1:4) with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface. Note: WPC shall be measured and paid separately
1350
-
-
... More
Supply only water proofing compound.
395.44
-
-
... More
M&L for Polymer modified bituminous membrane with sand witched polythene film/non woven polyester reinforcement /polymeric water proofing membrane weighing minimum 3Kg/sqm (Make : IWL/STP/ HYPERPLAST or equivalent ) laid after Applying bituminous primer @ 0.30 Kg per Sqm over plastered surfaces of roof including parapet surfaces. (i.e roof slab cleaned thoroughly to remove all loose particle dust/dirt particle ) membrane shall be laid over entire roof surface and on vertical surface up to grooves ( or as per manufacturers recommendation) with over laps of 100mm The over lap shall be sealed by flames or as per manufacturer instruction.Hot blown bitumen grade 85/25 @1.2kg/Sqm applied over the membrane should be compatible with membrane all as recommendation manufacturers and all as specified and directed.
1350
-
-
... More
M&L for preparation of roof surface and applying two coats of Aluminum base primer @ 0.1 Kg/Sqm such as (REFLEX) applied over APP membrane(i.e. covered with Bitumen coat) density -1.00-1.2 gms/Cm2and Viscosity 150-200CPS with two coats of solar reflective all as specified and directed
Note: This Treatment is applicable where roof is in accessible condition.
1275
-
-
... More
M&L for Cement concrete tiles 25cmX25cmX22mm thick with grey cement and no pigment laid over 15mm thick in CM(1:4) mixed with crude oil 5% by weight of cement and jointed and pointed in Cm(1:3) joint thickness not exceed 5mm)
Note;-This tiles are layer where roof is an accessible type.
65
-
-
... More
Dismantling of floor hearth and wall tiling incl mortar bedding and throw rubbish out the premises as directed by the Engr-in-Charge.
1837.82
-
-
... More
M&L for Non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.06 sq m but not exceeding 0.11Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over a screed layer of 15 mm thick in CM 1:6 complete all as specified and as directed.
90.72
-
-
... More
M&L for Non skid ceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified.
920.9
-
-
... More
M&L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m as in skirting/dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match and backing with 10 mm thick in CM 1:4 complete all as specified and as directed.
165
-
-
... More
M&L for Vitrified ceramic tiles 10mm thick Square/rectangular)polished area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Light Shade)cement to match over 20 mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes.
125
-
-
... More
M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to Dark Shade match over 20 mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes.
50
-
-
... More
M&L for light shade Vitrified tile 10mm thick polished, area of tile n exc.0.36 sqm as in Skirting set and jointed in cement slurry over and including 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.
30
-
-
... More
M&L for glazed coloured ceramic tiles of size 300x200x6.5mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.
50
-
-
... More
M&L for glazed coloured designer ceramic tiles of size 450x350x7mm OR 400X300X7 thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed by Engr-in-Charge.
406.2
-
-
... More
Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid bedded and pointed in any mortar
85
-
-
... More
M&L for Kota stone flooring 15 to 18 mm thick in riser of steps, skirting dado and pillar laid over 10 mm thick screed bed/backing coat of CM (1:6) incl all necessary mouldings/ rounding edge finish etc .., and jointed with coloured cement to match the surface all as specified and directed.
325
-
-
... More
M&L for Kota stone flooring 18to 20mm thick in flooring / landing Portions etc..,set and jointed in neat cement slurry and pointed in coloured to match the surface laid over 20mm thick screed bed in CM(1:6) all as specified and directed
450
-
-
... More
S&F Granite (of any type) slab 18-20 mm thick granite slab (table rubbed and polished) as in cooking platforms and like in cm (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and laid over 20mm thick screed bed in CM(1:6) incl all necessary mouldings/ rounding of edge finish all as specified and directed.
110.76
-
-
... More
S&F Providing edge moulding to 18-20mm thick of granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete.
330
-
-
... More
Demolition of unreinforced cement concrete in ground floor and pavings n.exc. 15 cm thick (below or above GL) complete all as specified and directed
13.46
-
-
... More
M&L for Cement concrete (1:3:6) type B-1 (using 20mm graded stone aggregate) as in plinth protection, 75mm thick, surfaces finished even and smooth without using extra cement complete all as specified.
210.9
-
-
... More
M&L for Hardcore of broken bricks of gauge exc 63mm but n exc. 100 mm, deposited, spread and leveled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed
9.38
-
-
... More
M&L for 75mm th Plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base of floors complete all as specified and directed
75
-
-
... More
M&L for Chequered cement concrete tiles 30cm x 30cm x 22 to 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and no pigment in floors including 20mm thick screed bed in CM 1:6 complete all as specified.
75
-
-
... More
Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards slabs/ blankets, any thickness, including cover fillets complete all as specified.
75
-
-
... More
M&L for fixing of Gypsum Board 6 to 7mm thick in ceiling fixed with screw 60x60cm placed in ceiling (Angle 25mm X 25mm , Main tee 38mmX23mm ,Sub tee 23mmX23mm) incl aluminium anodised snap grid frame 605X605 mm for false ceiling incl hanging arrangement all as specified and directed
75
-
-
... More
M&L for Cutting holes in brick wall exc half bricks but not exc one brick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as required complete all as specified.
1682
-
-
... More
Demolition of brick work built in cement mortar of any specification and in any position complete all as specified.
19.4
-
-
... More
M&L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified.
18
-
-
... More
M&L for brick work with sub class ‘B’ old size fly ash bricks straight or curved on plan to any radius as in half brick thick wall built in CM 1:4 complete all as specified and directed.
12.14
-
-
... More
Taking down of cement mortar plaster of any description and preparation of surfaces for receiving new plaster including racking out of joints complete all as specified.
2283.18
-
-
... More
M&L for rendering 15mm thick in cement mortar (1:4) on any face of brick wall or concrete surfaces, finished fair and even using water proofing compound all as specified and as directed
Note: WPC will be measured and paid separately
919.63
-
-
... More
M&L for rendering 10mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified.
1013.55
-
-
... More
M&L for 5mm thick rendering in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified.
350
-
-
... More
M&L for removing loose and broken concrete by chiseling/picking etc upto a depth of 10 to 30mm from soffit of slab and similar structural members cutting edges clearing the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles etc and washing with clean water and removal of debris to a distance not etc 50m all as specified and including necessary scaffolding etc complete all as specified and as directed.
25
-
-
... More
M&L for application of high build polymer sand mortar in 1:3 using Nitobond SBR @ 4ltrs per 50kg cement on ceiling surfaces 10 to 20 thick in two layers, surfaces over slurry priming coat of 1 volume Nitobond SBR to 1 volume water 3 volume fresh cement (5 sqm per litre Nito bond SBR) all as per manufacturer’s instructions including preparation of surfaces, complete all as directed
25
-
-
... More
S&F 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings & dismantling existing water storage tank, complete all as specified and directed .
2
-
-
... More
S&F 500 Ltr Rotational moulded triple layer polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified including dismantling existing water storage tank, complete all as specified and directed .
23
-
-
... More
Taking up or down, 25mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed.
82
-
-
... More
Taking up or down, 20mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed
130
-
-
... More
Taking up or down, 15mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed
125
-
-
... More
S&F 20 mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc.
200
-
-
... More
S&F 25 mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc.
75
-
-
... More
S&F 32 mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc.
108
-
-
... More
S&F 40 mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc.
75
-
-
... More
S&F 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete including taking down existing pipe line all as specified.
45
-
-
... More
All as per item No.141 above, but for 25mm outer dia of pipe.
30
-
-
... More
All as per item No.141 above, but for 32mm outer dia of pipe.
25
-
-
... More
Supplying and laying of CPVC brass elbow for pipes 20mm outer diameter SDR 11 fittings in repairs complete all as specified
20
-
-
... More
Supplying and laying of CPVC Brass Elbow (3/4 X ½) pipes 20mm outer diameter SDR 11 fittings complete all as specified
15
-
-
... More
Supplying and laying of CPVC Brass Tee of 20mm outer diameter SDR 11 fittings complete all as specified
20
-
-
... More
Supplying and laying of CPVC Male Brass Threaded Adaptor (MTA/ MBTA) ) Brass Tee of 20mm outer diameter SDR 11 fittings complete all as specified
20
-
-
... More
Supplying and laying of CPVC Female Brass Threaded Adaptor (MTA/ MBTA) ) Brass Tee of 20mm outer diameter SDR 11 fittings in repairs complete all as specified
20
-
-
... More
S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified.
27
-
-
... More
Supply and fix in repairs Fancy type chromium plated pillar taps, LONG NECK ,15mm dia bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
26
-
-
... More
S& F in repair Bib tap of cast copper alloy brass but fancy type, Chromium plated 15mm bore, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.
96
-
-
... More
S&F in repair CP Fancy type 15mm bore dia stop cock/angle cock cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated with fancy shank and cup all as specified and directed
103
-
-
... More
Supply and fix in repairs Vitreous china wash down water closet pan (pedestal pattern ),white ( excluding flushing cistern and flush pipe ) including connection to drain pipe and to flushing pipe etc and provision of plastic water closet seat, white, closed pattern with flat bottom, & cover & mild steel chromium plated or aluminium hinging devices including making good the floors to match with the existing surface complete all as specified and as directed
6
-
-
... More
S&F as fixed in repairs vitreous China squatting pan, ‘Orissa 'pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) pan including connection to "P" trap set ,and to flushing pipe, anti-syphonage pipe,etc. complete including Concrete and making good to floor all as specified and directed.
22
-
-
... More
Supply and fix in repairs PVC connection 15mm size with PTMT nuts of length 450mm long complete all as specified and as directed.Make:Prayag/M/S Shakthi industries
103
-
-
... More
S & F in repairs Gun-metal, globe or gate valves 25mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed
25
-
-
... More
S & F in repairs Gun-metal, globe or gate valves 32mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed
5
-
-
... More
S & F in repairs Ball brass valve(Float valve for water tanks) 25mm dia high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed
15
-
-
... More
S & F in repairs Ball brass valve(Float valve for water tanks) 20mm dia high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed
10
-
-
... More
S&F Two Way brass CP Bib cock with wall flange 50 to 65mm long (facilitate to fix the Health faucet) (Make:Jaquar) CQTNO;23041/FLR 8041N) and Make: CERA catNo:F3002161 /F2002161 15 mm dia bore type with handle, screwed down, screwed for iron pipe or female of quarter turn type as fixed in repairs
5
-
-
... More
S&F in repair 15 mm dia CP central hole fancy type basin mixer for wash hand basin (hot and Cold) with extended spot type with 450mm braided connection pipe (Without POP UP) Make: CERA Cat No:F 3002581/Jaquar Cat NO:CQT-233321B or equivalent including all fittings as per manufacturers specification complete all as specified and directed.
5
-
-
... More
S&F Hot and cold wall mixer (Three in one type)With Over head shower type arrangement including bend pipe for over head shower with connecting legs and wall flanges as fixed in repairs and all as specified and directed .
Make:-Jaquar Cat No: FLR-5217 N; CERA Cat No:F2004401 or equivalent
2
-
-
... More
S&F Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq.cm, 32mm bore as fixed complete all as specified and directed.
28
-
-
... More
S&F in repair, 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) and fixed complete all as specified.
5
-
-
... More
S&F in repair, 25mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) and fixed complete all as specified.
10
-
-
... More
S&F 20mm dia aluminium Powder coated curtain rod with fixing with side brackets, end cups, rings @ 10 Nos per RM and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified.
250.6
-
-
... More
S&F in repairs Health faucet (ABS Body) with 8mm dia 1.00 m long flexible tube(PVC /stainless steel coated) and wall hook all as specified and directed by Engineer-in-Charge.
Make:Jaquar cat No: ALD-CHR-585; Cera Cat NO:F8030103,Prayag No:1871 or equivalent.
5
-
-
... More
S&F 125mm dia PTMT grating fixed over trap with cement as in repair complete all as specified.
85
-
-
... More
S&F 600mm long CP Brass towel rail of to wall with steel screws and PVC rawl plug as in repair complete all as specified.
28
-
-
... More
S&F in repair chromium plated shower rose 125mm size with or without swivel joint for fixing in 15mm dia pipe.
26
-
-
... More
S & F in repairs glass corner shelf, Cat No.ACN-CHR-1173 of Jaquar or equivalent in Cera / Neycer, complete all as specified and as directed
30
-
-
... More
S&F sinks with drainage board made of stainless steel 1.0mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm as in repairs all as specified and directed
2
-
-
... More
S&F sinks made of stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm as in repairs and all as specified and as directed.
22
-
-
... More
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stones, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified.
15
-
-
... More
S & F 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed by Engineer-in-Charge.
222.69
-
-
... More
Supply and fix 4 mm thick sheet figured glass and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.
34.68
-
-
... More
S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement as in repairs complete all as specified.
74
-
-
... More
S&F 600mmX450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board of commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers with alround aluminium beading as fixed in repairs and all as specified and directed by Engineer-in- charge
22
-
-
... More
Supply & fixing PVC cabinet with mirror of size 350x450mm any Colour with all fixing arrangements as per manufacturer instruction as fixed in repair and all as fixed and directed by Engineer-in-Charge.Make : PRAYAG.
8
-
-
... More
S&F 40mm bore waste pipe Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq.cm, as fixed complete all as specified and directed.
10
-
-
... More
S&F 32 mm bore Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq.cm, as fixed complete all as specified and directed.
40
-
-
... More
Taking down eaves gutters and rainwater pipes(any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc, including cleaning or refixing (measured overall as fixed along the centre line over fittings and accessories)
336
-
-
... More
S&F in repairs PVC(SWR) pipe 110 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints,fixed to walls with clamp all as specified and directed.
300
-
-
... More
S&F in repairs PVC(SWR) pipe 75 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, fixed to walls with claim all as specified and directed.
36
-
-
... More
S&F in repairs PVC(SWR) bend any radius, 110 mm dia all as specified and directed.
54
-
-
... More
S&F in repairs PVC(SWR) bend any radius, 75 mm dia all as specified and directed.
12
-
-
... More
S&F in repairs PVC (SWR) junction single, (Single T) equal with access door 110mm dia etc complete all as specified and directed by EIC
8
-
-
... More
S&F in repairs PVC (SWR) junction single, (Single Y) equal with access door 110mm dia etc complete all as specified and directed by EIC
12
-
-
... More
S&F in repairs PVC (SWR) junction single, (Single T) equal with access door 75mm dia etc complete all as specified and directed by EIC
2
-
-
... More
S&F in repairs PVC (SWR) junction single, (Single Y) equal with access door 75mm dia etc complete all as specified and directed by EIC
25
-
-
... More
S&F in repairs PVC(SWR) bend with access door any radius, 110 mm dia all as specified and directed.
12
-
-
... More
S&F in repairs PVC(SWR) bend with access door any radius, 75 mm dia all as specified and directed.
12
-
-
... More
M&L for Preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified.
500
-
-
... More
M&L for Complete removal of Old plastered surface of ceiling and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed.
880
-
-
... More
M&L for Complete removal of Old plastered surface of wall and applying two or more coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.of acrylic distemper over a coat of primer complete all as specified and directed.
5200
-
-
... More
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over 3mm thick Birla/JK wall care putty to new or old plastered surfaces
2300
-
-
... More
M&L for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
582.07
-
-
... More
M&L for Preparing new surfaces of steel of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.
75
-
-
... More
M&L for applying two coats of synthetic enamel paint (Ordinary tint)over one coat of primer on new plastered surfaces including preparation of surfaces.
3.53
-
-
... More
M&L for writing letters or figures (Block Roman Italic and Indian ) 15 cm High on wall surfaces, so that the stand out boldly and solidly without showing signs of brush marks all as specified. (Note :- The letters to be write with in the black synthetic enamel painted back ground, it is measured and paid to Separately)
192
-
-
... More
M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.
625
-
-
... More
S&F 1.00mm thick stainless steel plate racks of size 750X600X250mm all as specified and directed.
23
-
-
... More
INTERNAL ELECTRIC SUPPLY
-
-
-
... More
Taking down carefully copper / aluminium Point Wiring [Light, Fan, Socket or Power] complete including Fittings such as Switches, Ceiling Roses, Pendants, Regulators, Sockets etc. and making good the disturbed surfaces all as per existing complete all as specified and as directed.
610
-
-
... More
M & L for Point Wiring complete with 1100 Volts, FRLSH Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, confirming to IS - 694 drawn through PVC Conduit concealed in Walls / Roofs / Floors / Ceiling etc. and Modular Type Pressed Metal Flush Box made out of 1mm thick GI Sheet of suitable size housing Modular Type Switches, Sockets and Regulators etc. concealed in walls, including 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth Dolly for One Light / Fan Point / Bell Point controlled by One Switch complete all as specified.
471
-
-
... More
All as per Serial Item No. 204 above but for One Light / Fan Point / Bell Point controlled by Two Nos. of, Two way Switches complete all as specified.
6
-
-
... More
All as per Serial Item No. 204 above for but One 3 Pin Switch Socket Outlet 5 Amps on Same Board complete all as specified.
122
-
-
... More
All as per Serial Item No. 204 above but for One 3 Pin Switch Socket Outlet 05/06 Amps on independent board, with 1100 Volts, FRLS grade, 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable confirming to IS - 694 and including 1100 Volts, FRLS grade, 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable as Earth Continuity Conductor.
80
-
-
... More
All as per Serial Item No. 204 above but for One 3 Pin Switch Socket Outlet 15/16 Amps on independent board, with 1100 Volts, FRLS grade, 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable confirming to IS - 694 and including 1100 Volts, FRLS grade, 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable as Earth Continuity Conductor.
54
-
-
... More
S & F Switch, Modular Type, One Module, Single Pole, One Way, 6 Amps, 230 Volts complete all as specified and as directed.
648
-
-
... More
S & F Switch, Modular Type, One Module, Single Pole, Two Way, 6 Amps, 230 Volts complete all as specified and as directed.
12
-
-
... More
S & F Socket Outlet, 3 Pin, 6 Amps, Modular Type, Two Modules, 230 Volts complete all as specified and as directed.
202
-
-
... More
S&F Modular switch 1 way 16A, 1 module single pole complete all as specified and directed by Engr-in-charge.
54
-
-
... More
S & F Socket Outlet, Modular Type, Two Modules, Multipurpose, 3 Pin, 16 Amps and 3 Pin, 6 Amps, 230 Volts complete all as specified and as directed.
54
-
-
... More
S & F Electronic Fan Regulator, Stepped Type, Modular Type, Two Module, 120 W, AC, 230 Volts, Single Pole complete all as specified and as directed.
78
-
-
... More
S & F Bell Push, Modular Type, One Module, Single Pole, 6 Amps, 230 Volts complete all as specified and as directed.
25
-
-
... More
S & F Bell, Ding Dong / Multi Music Type, AC, 230 Volts, Single Pole complete all as specified and as directed.
25
-
-
... More
S & F Ceiling Rose, Surface Bakelite, 65 x 50 mm, Three Terminals, 230 Volts complete all as specified and as directed.
477
-
-
... More
S & F Modular White cover plate with frame,1 module, complete all as specified and as directed.
40
-
-
... More
S & F Modular White cover plate with frame, 2 module, complete all as specified and as directed.
25
-
-
... More
S & F Modular White cover plate with frame, 3 module, complete all as specified and as directed.
159
-
-
... More
S & F Modular White cover plate with frame, 4 module, complete all as specified and as directed.
39
-
-
... More
S & F Modular White cover plate with frame, 6 module, complete all as specified and as directed.
10
-
-
... More
S & F Modular White cover plate with frame, 8 module, complete all as specified and as directed.
78
-
-
... More
Taking down carefully submain wiring of any description complete including wooden battens / conduits / casing capping and making good the disturbed surfaces all as per existing complete all as specified and as directed.
910
-
-
... More
M&L for Sub main wiring with 2 runs of single core 6 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 25 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. including One run of 6 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor complete all as specified. Note: 3 runs of 6 Sq.mm & one run of 25mm dia PVC Conduit will be measured as one unit. (Replacement for wiring from main TPN DB to SPN DB).
360
-
-
... More
M&L for Sub main wiring with 2 runs of single core 4 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 25 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. including One run of 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor complete all as specified. Note: 3 runs of 4 Sq.mm & one run of 25mm dia PVC Conduit will be measured as one unit (Replacement for wiring from DB to AC & Geyser metal socket)
550
-
-
... More
M&L for Sub main wiring with 2 runs of single core 2.5 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 25/20 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. including One run of 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor for building security lights complete all as specified. Note: 3 runs of 2.5 Sq.mm & one run of 25/20mm dia PVC Conduit will be measured as one unit. (New wiring for building security lights)
460
-
-
... More
S&F in repairs SP & N Sheet Metal Enclosure with 2 Pole and Earth Metal Plug & Socket for incorporating SP MCB complete including One MCB, SP, 20 Amps, 240 Volts complete all as specified and as directed.
27
-
-
... More
S&F in repairs MCB DB, TPN, 4 Way, 415 Volts, Vertical, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs complete all as specified.
7
-
-
... More
S&F in repairs MCB DB, SPN, 12 Way, 240Volts, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs complete all as specified.
24
-
-
... More
S&F in repairs MCB DB, SPN, 4 Way, 240Volts, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs complete all as specified.
7
-
-
... More
S&F in repairs MCB, TPN, 63 Amps, 10KA, B curve complete including taking down unserviceable isolator all as specified and as directed.
7
-
-
... More
S&F in repairs MCB, SPN, 40 Amps, 10 KA, 230 Volts, 50Hz, C curve complete including taking down unserviceable isolator all as specified and as directed.
31
-
-
... More
S&F MCB, SP, 6 to 40 Amps, 10 KA, AC, 230 Volts, 50 Hz, B Curve complete including taking down unserviceable isolator all as specified and as directed.
324
-
-
... More
Taking down & refixing ceiling fans /exhaust fan after completion of B/R work complete including Painting, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. including writing MES No. etc complete all as specified and as directed.
101
-
-
... More
S&F LED lights fitting 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
128
-
-
... More
S&F LED lights fitting 10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
140
-
-
... More
S&F bulkhead LED lights fitting 10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
23
-
-
... More
Removing and re-fixing LED fitting and fixture of any type and any capacity, keeping in safe custody and refixing the same after necessary B/R and ceiling work including replacing of clamps, twin core wire complete all as directed
27
-
-
... More
Removing & Refixng of energy meter after completion of B/R & E/M work complete all as specified and as directed
23
-
-
... More
S&F 30 Watt LED building security light fitting having minimum 110 luminus/Watt efficiency with IP 65 and 4 KV inbuilt surge protection, complete with pressure die cast housing with epoxy power coated dark graphite grey colour finish. Prismatic polycarbonate cover with individual LED lenses, lumanire. 2 core 1.5 Sq mm copper conductor shall use to connect LED light to existing ceiling rose/junction box through GI bracket and flexible PVC pipe with all accessories complete all as specified and directed by the Engineer in charge. (Note :- GI Bracket shall be paid separately.)
28
-
-
... More
S&F GI pipe 40 mm bore , medium grade, duly bend to shape 1.2 m long mounting bracket, fixing clamps bolts, nuts of suitable size etc complete all as specified and as directed
28
-
-
... More
S&F Cable Junction of size 93 x 93 x 62 Boxes IP 66/69 “halogen free and weather proof” for 2.5 sq.mm cable for outdoor installation ( with same company metric knockouts for cable entry and terminal) Make : Hensel Model : KF 0202 G
28
-
-
... More
Taking down & refixing of water storage heater after completion of E/M & B/R works complete including complete cleaning and servicing of geyser, with replacement of hot & cold pipes , nut & bolts etc complete all as specified and as directed.
24
-
-
... More
S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers
27
-
-
... More
M&L for demolition of brick work for fixing of 300mm sweep exhaust fan and making of proper circular shape and finishing with internal rendering of 1:6 cement mix complete all as specified and as directed
27
-
-
... More
S&F 1.25mm thick MS plain Black sheet enclosed box type fitting similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required
38
-
-
... More
S&F 30 mm width of flap of Continuous (piano) hinges, mild steel, bright finish or electrogalvanised and welded to Steel Sheet
30
-
-
... More
S&F 75 mm size Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws/welding to ms sheet
30
-
-
... More
M&L for applying two coat of synthetic enamel paint over one coat red oxide of new steel surfaces of any description, over 10cm in width or girth, not otherwise described all as per specification and as directed
38
-
-
... More
M&L for Earthing complete with Galvanised Steel Earth Plate Electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of Plate not less than 1.50 m below normal ground level connected to 32 X 6mm GI Strip [Earth Lead] and GI pipe 50 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the Plate by means of GI Bolts & Nuts complete all as per Electrical Plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified.
7
-
-
... More
EXTERNAL WATER SUPPLY
-
-
-
... More
Supply and lay in repairs 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc of size outer dia 50 mm complete all as specified and as directed.
90
-
-
... More
Supply and lay in repairs 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc of size outer dia 32 mm complete all as specified and as directed.
110
-
-
... More
Supply and fix in repairs PPR Gate Valves (Brass Insert) of 50 mm bore.
7
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%