Indian Oil Corporation Limited Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Indian Oil Corporation Limited - IOCL Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date1 Jul 2024
Closing Date29 Jul 2024
Tender AmountRefer Documents
Costs
EMD
₹ 1,67,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PLHO_178229_1Bid Award Id
ViewTender No
PLCC/LNG Hub/CGD/24039Tender Authority
Indian Oil Corporation Limited ViewPurchaser Address
-Website
http://https://www.iocl.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Bidders_help_Document_for_Preferencial_ Bidding_20230207_v1
Special_Instructions_to_the_Bidders_20230207_version_1a
BOQ Items
... More
EARTHWORK :
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in widt h as well as 10 sqm on plan) including getting out and disposal of excavated earth, all works up to any lead and lift, as directed b y the Engineer-in-Charge :
-
-
-
... More
In all kinds of soil
974.7
233951
-
... More
In Ordinary rock
2024.3
941686
-
... More
In Hard rock (requiring blasting)
100
80466
-
... More
In Hard rock (where blasting is prohibited)
150
201190
-
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
13
33511
-
... More
Supplying all labour, materials, tools, chemicals, spray pumps etc. for making pre-constructional anti-termite treatment & creating a continuous chemical barrier under & all round the column pits, wall trenches, top surface of plinth filling, junction of wall & fl oor, along the exterior perimeter of the building, complete in all respects inclusive of cost of all labour, materials, tools, tackl es etc. as per drawings, specifications and direction of Site Engineer. [Note: Total plinth area of the building shall be measured for payment].
200
66268
-
... More
Supplying and filling selected earth/ moorum (excluding black cotton soil) from Contractor's own borrow areas including royalty, wit h all leads and lifts in low laying areas and filling to required grade and level including watering, compacting at optimum moisture content to 90% of Proctor's density, consolidation and rolling with 8 to 10 tonne power roller in layers not exceeding 20 cm thic kness, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
8100
4414457
-
... More
CONCRETE WORK :
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
1:2:4 [1 cement : 2 coarse sand (Zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from n atural sources]
20
179203
-
... More
1:3:6 [1 cement : 3 coarse sand (Zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from n atural sources]
6
49567
-
... More
1:4:8 [1 cement : 4 coarse sand (Zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from n atural sources]
175
1337283
-
... More
Making plinth protection 50 mm thick of cement concrete 1:3:6 [1 cement : 3 coarse sand derived from natural sources : 6 graded ston e aggregate 20 mm nominal size derived from natural sources] over 75 mm thick bed of dry brick ballast 40 mm nominal size, well ramm ed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth, etc . complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direc tions of the Engineer-in-Charge.
90
72942
-
... More
Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 [1 cement : 2 coarse sand (Zone-III) derived from natu ral sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources]
30
16586
-
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 Kg per square metre on dam p proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
30
4355
-
... More
REINFORCED CEMENT CONCRETE :
-
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
820
308287
-
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
1480
1190223
-
... More
Suspended floors, roofs, landings, balconies and access platform
150
137212
-
... More
Shelves (Cast in situ)
50
45737
-
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
1140
830647
-
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
1500
1452585
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto pli nth level :
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more
100000
11020020
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above pl inth level :
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500 D or more
17500
1928503
-
... More
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using coarse aggregate as well as fine aggregate derived from natural sources and cement content as per approved design mix, manufactured in fully automatic batch ing plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , ex cluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as pe r IS:9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per directions of the Engineer-in-Charge. [Note : Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design m ix is payable/ recoverable separately] :
-
-
-
... More
All works upto plinth level
1200
13302328
-
... More
All works above plinth level upto floor V level
120
1552536
-
... More
Painting foundation concrete (RCC) with hot bitumen of grade VG-10 @ 17 Kg/10 sqm including cleaning the foundation concrete with br ushes etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
200
136606
-
... More
MASONRY WORK :
-
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in :
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
70
568899
-
... More
Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to fl oor V level in all shapes and sizes in :
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
325
3256026
-
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level :
-
-
-
... More
Cement mortar 1:4 (1 cement :4 coarse sand)
30
36907
-
... More
Extra for providing and placing in position 2 Nos. 6 mm dia. M.S. bars at every third course of half brick masonry.
30
3171
-
... More
Area of slab up to 0.50 sqm
10
55664
-
... More
Area of slab over 0.50 sqm
10
52896
-
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar lo cation in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of c ut edges etc. complete.
6
5817
-
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75 x 50 cm deep and 1.8 cm thick, fixed in ur inal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or w ith cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per directions of the Engineer- in-Charge and finished smooth :
-
-
-
... More
Granite Stone of approved shade
2
8491
-
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrange ments for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27. 5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS:4454 (Part-1) and M.S. top co ver of required thickness for rolling shutters :
-
-
-
... More
80 x 1.25 mm M.S. laths with 1.25 mm thick top cover
6
23315
-
... More
Providing and fixing ball bearing for rolling shutters.
4
2216
-
... More
Supplying and fixing circular/ hexagonal M.S. Sheet ceiling fan box with clamp, 140 mm internal diameter, 73 mm height, 3 mm thick r im bottom, and top lid of 1.5 mm thick, M.S. sheet lids shall be screwed into the M.S. box by means of 3.0 mm diameter round headed screws, clamp shall be made of 12 mm diameter M.S. bar bent to shape as per standard drawings with over all length as 80 cm complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of t he Engineer-in-Charge.
5
1136
-
... More
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete :
-
-
-
... More
Galvanised M.S. wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides.
10
9361
-
... More
Stainless Steel (Grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides.
10
12268
-
... More
Supplying, fabricating, erecting, placing and fixing in position M.S. structural works using rolled/ built up sections for truss, cl addings, bracings, purlins, supporting frames made of joists, tubes, pipes, channels, angles, plates, flats, bars etc. including cut ting to required size welding of joints, fixing anchor plates, including bolts, theading, nuts, washers, sleeves etc. including pre paration of detailed fabrication drawings & submission to the Engineer-in-Charge for approval before start of fabrication, supplying & applying painting with two coats of epoxy paint "EPILUX 155 High Build Enamel over a coat of "EPILUX 610" Primer of M/s BERGER or any other approved equivalent make as per manufacturer’s recommendation, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Excluding the cost of conc rete work).
13
1999550
-
... More
Supplying and fixing, shop fabricated M.S. steel Electroforged Welded Gratings (Hot dip galvanised as per IS:2629 and tested as per IS:2633 and IS:6745) of approved make with quantity of zinc coating shall not be less than 9.0 N/sqm of surface area (0.12 mm unifor m thickness) over drains, stair treads etc., wherever required with maximum size of void/ mesh in the grating limited to 33 mm x 50 mm including welding/ fixing/ clamping to base frame, etc. complete in all respects inclusive of cost of all labour, materials, tool s, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
1
180790
-
... More
Supplying, fitting and fixing hot dip galvinised barbed line wire through holes in fencing posts (already made in the body of the po st), tightening and fixing the wire in tight condition with straining bolts (straining bolts at end post) including the cost of cutt ing and lapping joints, making holes, straining bolts, galvanised staples, binding wires etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
1200
814511
-
... More
Supplying, fitting and fixing punched tape concertina spiral coil of 50 turns per coil having core wire of 2.6 mm diameter made of h igh carbon spring steel of high tensile strength as per IS:4454 (Part-I, Grade-II) having minimum galvanising coating thickness equi valent to 230 grams per square metre and low carbon steel strip of 0.5 mm thickness having a series of barbes punched all along the length on both sides of the strip at regular interval as per IS:513, DD quality having minimum galvanising coating thickness of 12 m icrons. Hardness of tape should be between 137-180 VPN (Victor Penetration Number). The coil should be clipped sufficiently at regul ar intervals. The coil should not be stretched for more than 6.0 m length and the minimum diameter of the coil in the closed conditi on should not be less than 600 mm complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per dr awings, specifications and directions of the Engineer-in-Charge.
300
177159
-
... More
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make & colour using acid and/or alkali resisting mor tar bedding and filling joints with acid and/or alkali resisting cement as per IS:4457, all complete as per specifcations and direct ions of the Engineer-in-Charge :
-
-
-
... More
In flooring on a bed of 10 mm thick mortar 1:4 (1 acid and/or alkali resistant cement : 4 coarse sand) :
20
39464
-
... More
In dado/ skirting on 12 mm thick mortar 1:4 (1 acid and/or alkali resistant cement : 4 coarse sand) :
20
42439
-
... More
Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigmen t to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse san d) :
20
40437
-
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cemen t: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and poli shing complete.
20
47781
-
... More
Providing and fixing first quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by the Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey ce ment slurry @ 3.3 Kg/sq.m., including pointing in white cement mixed with pigment of matching shade complete.
10
13598
-
... More
Providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of first quality conforming to IS:15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including pointing the joints with white cement and mat ching pigment, etc. complete.
10
12234
-
... More
Providing and laying Glazed Vitrified Tiles (Matt/ Antiskid finish) of specified sizes (thickness to be specified by the Manufacture r) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacture, in all colours and shades, lai d on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tile s will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily :
-
-
-
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the Manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 ce ment : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joints with white cement and matching pigments etc., complete :
-
-
-
... More
Size of Tile 600x600 mm
50
99027
-
... More
Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1: 2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 k g of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
20
20788
-
... More
Providing gola 75x75 mm (in 75x75 mm deep chase) in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and do wn gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design.
50
15656
-
... More
Making Khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggr egate of 20 mm nominal size) over P.V.C. sheet 1 m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse s and) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
10
3221
-
... More
Providing and fixing on wall face Unplasticised Rigid PVC (uPVC) rainwater pipes (110 mm diameter, single socketed) conforming to IS :13592 Type-A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion.
50
20130
-
... More
Providing and fixing on wall face Unplasticised-PVC (UPVC) moulded fittings/ accessories for Un-plasticised Rigid PVC rainwater pipe s conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion :
-
-
-
... More
Coupler (110 mm)
20
3109
-
... More
Single Push-fit Coupler (110 mm)
20
2862
-
... More
Bend- 87.5 Degrees (110 mm)
20
3427
-
... More
Shoe - Plain (110 mm)
20
3003
-
... More
Providing and fixing Unplasticised PVC (uPVC) pipe clips (110 mm) of approved design to unplasticised-PVC rainwater pipes by means o f 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
20
7623
-
... More
Providing and fixing LUXALON 75C & 225C un-perforated Aluminium panel coloured ceiling manufactured by M/s. HUNTER DOUGLAS INDIA or any other approved equivalent brand, each panel consisting of 75/225 mm wide x 15.5 mm deep and 0.5 mm thick with bevel edged panel made from enamelled corrosion resistance aluminium alloy AA-5050 (Al.Mg), each panel to abut each other with a narrow 'V' groove, cl ipping with a baked enamelled aluminium panel carrier of 32 mm wide x 39 mm deep x 0.95 mm thick in standard length of 5 metres made of double baked enamelled aluminium alloy AA-5050 (Al.Mg) black with cutouts to hold the panels in a module of 75 mm closed at a di stance of 1.25 metre, each panel carrier suspended by means of G.I. suspension rod 4 mm diameter and a galvanised supsension spring clip at a distance of 1.7 metre centre to centre, making openings for light fittings etc. with suitable peimeter framing all complet e as per manufacturer's recommendation and directions of the Engineer-in-Charge. [Note: Measurement shall be made wall to wall witho ut any deduction for openings, for payment purpose].
20
154992
-
... More
15 mm cement plaster on the rough side of single or half brick wall of mix :
-
-
-
... More
1:6 (1 cement : 6 fine sand)
2830
1093887
-
... More
6 mm cement plaster of mix 1:3 (1 cement : 3 fine sand)
250
75015
-
... More
Neat cement punning.
200
16564
-
... More
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :
-
-
-
... More
Water thinnable cement primer
3080
243904
-
... More
Finishing walls with Acrylic Smooth exterior paint of required shade :
-
-
-
... More
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
2000
434759
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wa ll surface to prepare the surface even and smooth complete.
950
144373
-
... More
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 gra ms/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour :
-
-
-
... More
Two coats
960
144318
-
... More
Providing & fixing galvanized chicken wire net 20 Gauge, 20 mm mesh size in plastering work at the junction of RCC Columns/ Beams & brickwork as directed by the Engineer-in-Charge.
100
28317
-
... More
Preparation and consolidation of sub-grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the s ub grade and disposal of surplus earth with lead up to 50 metres.
300
62066
-
... More
Construction of granular sub-base by providing close graded material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thicknes s with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per s pecifications and directions of the Engineer-in-Charge :
-
-
-
... More
With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30
324
1076674
-
... More
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specifica tion including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfini sher in sub-base/ base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of the Engineer-in-Charge.
135
470656
-
... More
Construction of dry lean cement concrete sub-base over a prepared sub-grade with coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be a s per specifications, cement content not to be less than 150 Kg/cum, optimum moisture content to be determined during trial length c onstruction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, for all leads & lifts, laid with a mechanical paver, compacting with 8-10 tonne vibratory roller, finishing and curing etc. complete as per directi ons of the Engineer-in-Charge.
150
768539
-
... More
Providing and laying design mix reinforced cement concrete of M-30 grade in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specifi ed design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading, levelling to required s lope/ camber and compacting mechanically by using screed board vibrators, vaccum dewatering process and finally finishing in require d texture by floating & brooming with wire brush, including steel form work with sturdy M.S. channel sections, curing, making provis ion for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing ex pansion joints as per drawing including dowel cap, sponge, sealing tape, bitumen painting, debonding tape and filling joints with ap proved joint filler and sealants, complete all as per direction of the Engineer-in-Charge. [Notes: (1) Item of joint fillers, sealan ts, dowel bars with sleeve/ tie bars to be paid separately. (2) The item rate is inclusive of cost of dowel cap, sponge, sealing tap e, bitumen painting, debonding tape. (3) Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design m ix is payable/ recoverable separately].
-
-
-
... More
Cement concrete prepared with batch mixing machine
120
1386252
-
... More
Providing and fixing in position pre-moulded joint filler in expansion joints. [Note: Unit "CM" shall mean "PER CENTIMETRE DEPTH PER CENTIMETRE WIDTH PER METRE LENGTH"].
100
408
-
... More
Providing and laying in position bitumen hot sealing compound for expansion joints etc. :
-
-
-
... More
Using Grade 'A' sealing compound. [Note: Unit "CM" shall mean "PER CENTIMETRE DEPTH PER CENTIMETRE WIDTH PER METRE LENGTH"].
100
435
-
... More
Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic materi al by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank hea ter and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the ro ad surface of all dirt, seals, oil, grease and foreign material etc. complete as per directions of the Engineer-in-Charge and accord ance with applicable specifications.
15
12023
-
... More
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wi re or nuts, bolts and washers as required complete as per the directions of the Engineer-in-Charge :
-
-
-
... More
Made of G.I. wire of dia 4 mm
420
441926
-
... More
Providing and laying factory made chamfered edge interlocking Cement Concrete paver blocks in foot path, park & lawns driveway or li ght & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in req uired colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver b locks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & directions of the Engineer-in-Charge :
-
-
-
... More
60mm thick Cement Concrete paver block of M-35 grade with approved colour, design & pattern.
1620
1891776
-
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thi ckness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc . as per directions of the Engineer-in-Charge. [Notes: (1) Length of finished kerb edging shall be measured for payment. (2) Precast C.C. kerb stones shall be approved by the Engineer-in-Charge.]
10
110555
-
... More
Supplying and fixing Road Hump of minimum size 350 mm width x 50 mm thick made of Carbon Black mixed Rubber with Additive of LDPE fo r reinforcement & UV resistant colouring agent of black & yellow colour with 4 reflective glass beads, of weight not less than 16 Kg /metre, and capacity to withstand minimum 35 tonne weight (moving vehicle load) including cleaning the road surface of all dirt, sca les, oil, grease and foreign material etc. and fixing the hump on the Road top as per manufactures specifications with necessary fas teners complete in all respects inclusive of cost of all labour, materials, fasteners, tools, tackles etc. as per specification and directions of the Engineer-in-Charge.
24
80803
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
-
-
-
... More
W.C. pan with ISI marked white solid plastic seat and lid.
3
20831
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, includ ing painting of fittings and brackets, cutting and making good the walls wherever require :
-
-
-
... More
White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap
2
6627
-
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete :
-
-
-
... More
Flexible Pipe :
-
-
-
... More
32 mm diameter
3
400
-
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board grou nd fixed to wooden cleats with C.P. brass screws and washers complete.
2
3386
-
... More
Providing and fixing toilet paper holder :
-
-
-
... More
C.P. Brass (Ref. Make: JAQUAR, Model: Cat. No.-1151 or approved equivalent).
3
2311
-
... More
Re-painting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with one coat of synthetic ena mel paint of any colour such as chocolate, grey or buff, etc. :
-
-
-
... More
75 mm diameter pipe
20
611
-
... More
Providing and fixing 100 mm sand cast Iron grating for gully trap.
10
588
-
... More
Providing and fixing soil, waste and vent pipes :
-
-
-
... More
100 mm diameter :
-
-
-
... More
Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS:3989
30
43247
-
... More
Providing and fixing plain bend of required degree :
-
-
-
... More
100 mm diameter :
-
-
-
... More
Sand Cast Iron S&S as per IS:3989
10
5157
-
... More
Providing and fixing double equal plain junction of required degree :
-
-
-
... More
100x100x100x100 mm :
-
-
-
... More
Sand Cast Iron S&S as per IS:3989
5
5713
-
... More
Providing and fixing single equal plain junction of required degree :
-
-
-
... More
100x100x100x100 mm :
-
-
-
... More
Sand Cast Iron S&S as per IS:3989
5
4406
-
... More
Providing and fixing collar :
-
-
-
... More
100 mm :
-
-
-
... More
Sand Cast Iron S&S as per IS:3989
5
2702
-
... More
Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe :
-
-
-
... More
100 mm diameter :
-
-
-
... More
SS-304 grade coupling with EPDM rubber
10
5333
-
... More
Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter :
-
-
-
... More
100 mm
10
1669
-
... More
Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work :
-
-
-
... More
100 mm diameter pipe
30
2542
-
... More
WATER SUPPLY :
-
-
-
... More
Internal Work - Exposed on wall: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. Th is includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per directions of the E ngineer-in-Charge :
-
-
-
... More
15 mm nominal outer dia pipes
20
6376
-
... More
20 mm nominal outer dia pipes
20
8102
-
... More
Internal Work - Concealed in wall: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for ho t & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This i ncludes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same inclu ding testing of joints complete as per directions of the Engineer-in-Charge :
-
-
-
... More
15 mm nominal dia pipes
20
10813
-
... More
20 mm nominal dia pipes
20
12621
-
... More
External Work: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water suppl y including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, t renching, refilling & testing of joints complete as per directions of the Engineer-in-Charge :
-
-
-
... More
20 mm nominal dia pipes
20
6696
-
... More
40 mm nominal dia pipes
20
14168
-
... More
100 mm nominal dia pipes
20
73373
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
... More
25 mm nominal bore
5
3280
-
... More
50 mm nominal bore
5
5736
-
... More
32 mm nominal bore
5
3835
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank (Ref. Make: SINTEX or approved equivalent), I S:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but with out fittings and the base support for tank.
2000
23222
-
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms :
-
-
-
... More
15 mm nominal bore
5
4083
-
... More
Providing and fixing 15mm diameter C.P. brass tap as per following with C.P. brass flange including cutting & making good the walls wherever required, etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specificatio ns and directions of the Engineer-in-Charge :
-
-
-
... More
Bib Cock (Ref. Make: JAQUAR, Model: Cat. No. 0021 or approved equivelent)
5
9647
-
... More
Providing and fixing 15mm diameter C.P. brass angle valve as per following with C.P. copper connecting pipe 375mm long or as require d including nuts, washers, C.P. brass flange, etc. including cutting & making good the walls wherever required, etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Ch arge :
-
-
-
... More
Angle Valve (Ref. Make: JAQUAR, Model: Cat. No. 0053 or approved equivalent)
5
9967
-
... More
Providing and fixing 15mm diameter C.P. brass stop cock with wall flange (Ref. Make: JAQUAR, Model: Cat. No. 0933 or approved equiva lent), male end with C.P. copper connecting pipe 375mm long or as required including nuts, washers, C.P. brass flange etc. including cutting & making good the walls wherever required complete in all respects inclusive of cost of all materials, labour, tools, tackl es etc. as per specifications and directions of the Engineer-in-Charge.
5
10316
-
... More
Providing & fixing Angle Valve (Ref. Make: JAQUAR, Model: Cat. No. 563 or approved equivalent) and Health Faucet with flexible tube 8mm diameter x 1.5 m long (Ref. Make: JAQUAR, Model: Cat. No. 549 or approved equivalent).
5
18513
-
... More
Providing and fixing the following washroom fittings, complete in all respects; inclusive of cost of all materials, labour, tools, t ackles etc. as per specifications and directions of the Engineer-in-Charge :
-
-
-
... More
Stainless steel liquid soap container (spring loaded push type) with lid and brackets fixed to P.V.C. cleats with C.P. brass screws, etc.
5
13262
-
... More
C.P. brass double coat hook (Ref. Make: JAQUAR, Model: Cat. No. 1161 or approved equivalent).
5
6759
-
... More
Providing and fixing 8 mm dia C.P./ S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by the Engineer-in-Charge.
6
2356
-
... More
Providing and fixing C.P. Brass 32 mm size Bottle Trap of approved quality & make and as per directions of the Engineer-in-Charge.
5
5827
-
... More
Providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete :
-
-
-
... More
20 mm nominal bore
5
2549
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS-8931 :
-
-
-
... More
15 mm nominal bore
5
3510
-
... More
Providing, laying and jointing glazed stoneware pipes Class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cem ent : 1 fine sand) including testing of joints etc. complete :
-
-
-
... More
150 mm diameter
30
19805
-
... More
200 mm diameter
30
31449
-
... More
250 mm diameter
30
46474
-
... More
Providing and fixing square mouth S.W. gully trap class SP-1 complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside dimension). The brick masonary chamber shall be constructed with common burnt clay F.P. S. (Non-modular) bricks of class designation 7.5. [Note: Weight of the cover shall not less than 4.50 kg and weight of the frame sha ll not be less than 2.70 kg as per standard design] :
-
-
-
... More
100x100 mm size P-type
10
30449
-
... More
Providing and laying non-pressure NP-2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in t he proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
-
-
-
... More
150 mm dia. R.C.C. pipe
5
3052
-
... More
250 mm dia. R.C.C. pipe
5
4978
-
... More
300 mm dia. R.C.C. pipe
50
56995
-
... More
450 mm dia. R.C.C. pipe
5
9191
-
... More
600 mm dia. R.C.C. pipe
5
12858
-
... More
1000 mm dia. R.C.C. pipe
5
31679
-
... More
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with common burnt clay F.P.S. (Non-modular) bri cks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 Kg and weight of frame 15 Kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cemen t : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :
-
-
-
... More
Inside dimensions 455x610 mm and 45 cm deep for single pipeline :
2
16002
-
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diam eter, 1.8 m long complete as per standard design :
-
-
-
... More
With common burnt clay F.P.S. (Non-modular) bricks of class designation 7.5
2
66730
-
... More
Constructing brick masonry Septic Tank with brickwork in cement mortar 1:6 including R.C.C. 1:2:4 (1 cement : 2 sand : 4 graded coar se aggregate) top slab, C.I. cover all as per standard drawing, etc. complete in all respects inclusive of cost of all materials, la bour, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge :
-
-
-
... More
For 10 Users
2
322075
-
... More
Constructing percolation pit of size 3.0m diameter and 2.0m deep, filled with 40 mm size brick ballast including providing suitable pre-cast RCC covers with lifting lugs, laying of 150mm diameter x 5.0m long U.P.V.C. pipe embedded in pit/ outlet pipe all complete as per specification and directions of the Engineer-in-Charge.
2
205898
-
... More
Providing and fixing self cleaning S.C.I. heavy quality Floor/ Nahani trap with 100mm diameter inlet and 100mm diameter outlet, 125m m C.P. brass grating (heavy type) with or without vent arm including cost of cutting and making good the walls and floors, jointing with lead caulked joints, connecting with waste water pipe etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
5
10330
-
... More
Providing and fixing 32mm diameter (Nominal Bore) brass ball valve of approved quality complete with high pressure copper floats, co mplete in all respects inclusive of cost of all materials, labour, tools, tackles, etc. complete as per specifications and direction s of the Engineer-in-Charge.
5
38008
-
... More
Constructing Brick Masonary catch pit in cement mortar 1:4 (1 cement : 4 coarse sand) including necessary excavation, 200mm thick fo undation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm size) and inside and top plastering (15mm thic k) with cement mortar 1:4 (1 cement : 4 coarse sand) finished with a floating coat of neat cement making necessary connections to dr ains inclusive of all labour, material, equipment, etc., all complete as per drawing, specifications and directions of the Engineer -in-Charge :
-
-
-
... More
600mm x 600mm x depth up to 750mm inner dimensions
2
31855
-
... More
Construction of second class brick masonary open surface drain (Size: 200mm wide & 200mm average depth) in cement mortar 1:4 laid ov er a bed of 150mm thick cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including mak ing haunches and providing 15mm thick cement plaster in CM 1:4 (1 cement : 4 coarse sand) with a floating coat of neat cement inside and its top and exposed surfaces, including excavatioin, disposal of the surplus earth up to any lead and lift as per standard desi gn and drawing, complete in all respects inclusive of cost of all labour, materials, carriages, excavation and refilling, curing etc ., as per specifications and directions of the Engineer-in-Charge.
50
120313
-
... More
Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and lengt h below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the le ngth of the pile to be embedded in the pile cap etc. by percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine all complete, including removal of excavated earth with all its lifts and leads [No tes: (1) Length of pile for payment shall be measured up to bottom of pile cap. (2) Truck Mounted rotary/ TMR/ Tubewell boring machi ne shall not be used] :
-
-
-
... More
450 mm diameter piles
1
2383
-
... More
Vertical load testing of piles in accordance with IS:2911 (Part-IV) including installation of loading platform by Kentledge/ Anchor piles method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per sp ecification & the direction of the Engineer-In-Charge. [Notes : (1) Initial and Routine Load Test shall not be carried out by Dynami c method of testing. (2) Testing agency shall submitt the design of loading platform for the approval of the Engineer-in-Charge.] :
-
-
-
... More
Single pile up to 50 tonne Safe Capacity :
-
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neopre ne gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural d rawings and the directions of the Engineer-in-Charge. [Note: Glazing, paneling and dash fasteners to be paid for separately] :
-
-
-
... More
For fixed portion :
-
-
-
... More
Powder coated aluminium (Minimum thickness of powder coating 50 micron)
300
180678
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neopre ne gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural d rawings and the directions of the Engineer-in-Charge. [Note: Glazing, paneling and dash fasteners to be paid for separately] :
-
-
-
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittin gs wherever required including the cost of EPDM rubber/ neoprene gasket required. [Note: Fittings shall be paid for separately] :
-
-
-
... More
Powder coated aluminium (Minimum thickness of powder coating 50 micron)
300
216332
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket et c. complete as per the architectural drawings and directions of the Engineer-in-Charge. [Note: Cost of aluminium snap beading shall be paid in basic item] :
-
-
-
... More
With float glass panes of 5.50 mm thickness
50
85554
-
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS:6315, having brand logo embossed on the body/ plate with double spring mechanism and door weight up to 125 Kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per directions of the Engineer-in-Charge. :
-
-
-
... More
With stainless steel cover plate minimum 1.25 mm thickness
10
31842
-
... More
Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per d irections of the Engineer-in-Charge :
-
-
-
... More
Powder coated (Minimum thickness 50 micron) aluminium tubular handle bar
10
7425
-
... More
Providing and fixing brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for al uminium doors including necessary cutting and making good etc. complete.
20
12104
-
... More
Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complet e :
-
-
-
... More
Powder coated (Minimum thickness 50 micron) Aluminium
20
1888
-
... More
Providing and fixing aluminium round shape handle of outer diameter 100 mm with SS screws etc. complete as per directions of the Eng ineer-in-Charge :
-
-
-
... More
Powder coated (Minimum thickness 50 micron) Aluminium
10
1103
-
... More
Providing and fixing, on fixed glazing/ doors/ window panes, sun control film "HP NATURAL 35 SAFETY COMBINATION FILM-4Mil" of M/s. G ARWARE or approved equivalent make and shade, all complete as per manufacturer's specification and as per directions of the Engineer -in-Charge.
50
66169
-
... More
Providing and fixing stainless steel (SS 304 Grade) adjustable friction windows stays of approved quality with necessary stainless s teel screws etc. to the side hung windows as per directions of the Engineer-in-Charge complete :
-
-
-
... More
205 X 19 mm
5
1687
-
... More
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, blac k finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of me mbrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemi cal parameters of the membrane shall be as under : (a) Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5 cm. (b) Tear strength in longitudinal and transverse direction as 300/250N. (c) Softening point of membrane not less than 150°C. (d) Cold flexibility shall be up to -2°C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane.
150
105918
-
... More
Filling the gap in between Aluminium/ Stone/ Wood frame and adjacent RCC/ Brick/ Stone/ Wood/ Ceramic/ Gypsum work by providing weat her/ structural non-sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and directions of t he Engineer-in-Charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600 :
-
-
-
... More
Up to 5 mm depth and 5 mm width
10
1651
-
... More
Supplying and using water proofing compound like CICO, PUDDLE or any other approved brand with Cement Plaster/ CC/ RCC complete in a ll respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the En gineer-in-Charge.
100
16648
-
... More
Grading roof for water proofing treatment with :
-
-
-
... More
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
5
45698
-
... More
Boring/ drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS:2800 (Part-I), including c ollecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all eq uipment, tools, plants & machineries required for the job, all complete as per directions of the Engineer-in-Charge, up to 90 metre depth below ground level :
-
-
-
... More
All types of soil :
-
-
-
... More
300 mm diameter
90
60855
-
... More
Rocky strata including boulders :
-
-
-
... More
300 mm diameter
30
48434
-
... More
Boring/ drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS:2800 (Part-I), including c ollecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all eq uipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & up to 150 metre depth below ground level :
-
-
-
... More
All types of soil :
-
-
-
... More
300 mm diameter
10
7888
-
... More
Rocky strata including boulders :
-
-
-
... More
300 mm diameter
10
17817
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, Un-plasticized PVC medium well casing (CM) pipe of req uired dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all dep ths, as per directions of the Engineer-in-Charge :
-
-
-
... More
150 mm nominal size diameter
90
82054
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well Un-plasticized P.V.C. medium well screen (RMS) pipes wi th ribs, conforming to IS:12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per d irections of the Engineer-in-Charge :
-
-
-
... More
150 mm nominal size diameter
30
29544
-
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per directions of the Engineer-in-Charge.
5
8754
-
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulde rs, in required thickness, for all leads & lifts, all complete as per directions of the Engineer-in-Charge.
5
8754
-
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per directions of the Engineer-in-Charge.
5
8754
-
... More
Gravel packing in tubewell construction in accordance with IS:4097, including providing gravel fine/ medium/ coarse, in required gra ding & sizes as per actual requirement, all complete as per directions of the Engineer-in-Charge.
20
39535
-
... More
Casting, supplying and erecting in position precast reinforced cement concrete elements (with proper lifting lugs) for trench & drai n covers, shelves, partitions, post, slabs etc. for all leads and levels including making necessary moulds, vibrating, tamping, cur ing, finishing the top surface with cement mortar 1:3 (1 cement : 3 fine sand) to give a smooth and even surface, transportation to Site, aligning and fixing in position with cement mortar 1:3 (1 cement: 3 find sand,) including making recess in brick wall for pla cing the precast element in position and making good the same etc. complete in all respects inclusive of cost of all labour, materia ls, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. [Note: Payment for Reinforcement s hall be made as per relevant item of SOR.] :
-
-
-
... More
With cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10 mm nominal size).
20
375641
-
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality :
-
-
-
... More
Heavy Duty-20 :
-
-
-
... More
Circular shape 560 mm internal diameter
2
3884
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel scr ewed and socketed/ plain ended casing pipes of required dia, conforming to IS:4270, of reputed & approved make, including painted wi th outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges , fittings & accessories, all complete, for all depths, as per directions of the Engineer-in-Charge :
-
-
-
... More
150 mm nominal size dia having minimum wall thickness 5.00 mm
10
21934
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/ 3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to I S:8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two c oats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, a ll complete, for all depths, as per directions of the Engineer-in-Charge :
-
-
-
... More
150 mm nominal size diameter
10
23356
-
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, remova ble as per requirement, all complete for borewell of :
-
-
-
... More
150 mm diameter
1
278
-
... More
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS:2800 (Part-I), including ne cessary bolts & nuts of required size complete. :
-
-
-
... More
150 mm clamp
1
1966
-
... More
Providing and fixing Bail plug/ Bottom plug of required diameter to the bottom of pipe assembly of tubewell as per IS:2800 (Part-I) :
-
-
-
... More
150 mm diameter
1
370
-
... More
Supplying, providing, installation, testing & commissioning of sub-mersible pump-cum-motor of approved make capable of delivering 30 0 Litre Per Minute (LPM) to required head with starter, wiring from starter to motor and incoming feeder to starter including pipe w ith all attachment complete in all respects inclusive of cost of all labour, materials, tools, tackles, etc. as per drawings, specif ications and directions of the Engineer-in-Charge :
-
-
-
... More
7.5 HP
1
124618
-
... More
Supplying and providing non-shrinkable cement grout (SHRINKKOMP 20 or any other equivalent approved brand) for grouting holding down bolts in pocket holes for equipment foundation, including necessary surface preparation mixing of grout, curing as per manufacturer 's recommendation/ specification and directions of the Engineer-in-Charge. [Note: This item shall be operated under specific instruc tions of the Engineer-in-Charge]
200
17074
-
... More
Development of tube well in accordance with IS:2800 (Part-I) and IS:11189, to establish maximum rate of usable water yield without s and content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, including disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and directions of the Engineer-in-Charge. [Note: Unit "H" shall mean "PER HOUR"].
10
11319
-
... More
Providing and filling bituminastic compound in 50mm thick x 150mm deep grooves around foundations, in floors, pavements and expansio n joints, etc. complete as per directions of the Engineer-in-Charge.
50
47243
-
... More
Providing and fixing 75mm diameter P.V.C. pipe (4 Kg/sq.cm) for Weep Holes in Masonry/ RCC wall including providing 230x230x230 mm s ize (approx.) filter using pebles of 40mm & down size in every weep hole on retaining side etc. complete in all respects inclusive o f cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge.
250
91072
-
... More
Providing and fixing 100mm wide Vertcal Fabric Blind system of VISTA/ MAC/ TRAC of approved make & shades complete along with standa rd accessories in required design/ shade as per manufacturer's recommendations, specification and directions of the Engineer-in-Char ge.
20
29114
-
... More
Serrated with central bulb (225 mm wide, 8-11 mm thick)
10
3737
-
... More
Supplying and placing in position 5.0 mm thick steel chequered plates over cable ducts, valve pits etc. including provision for lift ing arrangements complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifica tions and directions of the Engineer-in-Charge.
20
129891
-
... More
Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete.
200
192755
-
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I cl amps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
-
-
-
... More
One urinal basin with 5 litre white P.V.C. automatic flushing cistern
2
13152
-
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obta ined. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations] :
-
-
-
... More
Supplying and stacking of good earth at site including royalty and carriage up to any lead complete. [Note: Volume of earth measured in stacks will be reduced by 20% for payment].
2
1450
-
... More
Supplying and stacking sludge at site including royalty and carriage up to any lead complete. [Note: Volume of sludge measured in st acks will be reduced by 8% for payment].
2
855
-
... More
Supplying and stacking of well decayed cattle manure at site including royalty and carriage up to any lead complete. [Note: Volume o f cattle manure measured in stacks will reduced by 8% for payment].
2
711
-
... More
Mixing earth and sludge or manure in the required proportion specified or directed by the Engineer-In-Charge.
2
99
-
... More
Spreading of sludge, dump manure and/or good earth in required thickness including removal of debris/ un-wanted material, consolidat ion, dressing, levelling and watering etc. complete as per directions of the Engineer-in-Charge. [Note: Cost of sludge, dump manure and/or good earth shall be paid separately under relevant item of SOR].
2
142
-
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by vo lume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts. [Note: Cost of manure, sludg e or extra good earth if needed shall be paid separately under relevant item of SOR].
-
-
-
... More
Holes 1.2 m diameter and 1.2 m deep
10
4716
-
... More
Holes 60 cm diameter and 60 cm deep
10
616
-
... More
Supplying & Stacking of Selection No.1/ Doob Grass at site fresh & free from weeds having proper roots in green including loading, u nloading, carriage and all taxes paid etc. complete as per directions of the Engineer-in-Charge.
50
3922
-
... More
Grassing with selection No. 1/ Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supply and filling of good earth, if required during maintenance period. [N ote: The grass and good earth shall be paid for separately under relevant item of SOR] :
-
-
-
... More
With grass Turf
20
361
-
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishi ng and reinforcement - All work up to plinth level :
-
-
-
... More
1:1.5:3 [1 cement : 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived fr om natural sources]
30
305616
-
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fille ts, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering , shuttering, finishing and reinforcement, with :
-
-
-
... More
1:1.5:3 [1 cement : 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived fr om natural sources]
5
61414
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 Degree landings, balconies, shelves, chajjas , lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cos t of centering, shuttering, finishing and reinforcement, with :
-
-
-
... More
1:1.5:3 [1 cement : 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived fr om natural sources]
5
64435
-
... More
Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos. cross sectional T.M.T. hoop bars, including providing 50 mm dia p erforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direct ions of the Engineer-in-Charge.
50
79909
-
... More
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
1.00 mm thick with zinc coating not less than 275 gm/m²
100
150563
-
... More
INSTRUMENTATION WORKS
-
-
-
... More
"Fire Alarm Control Panel (FACP) - Control Building Design, detailed engineering, supply, configuration, testing, installation, erection and commissioning of FACP along with SCADA comp atibility, Third party vendor system such as gas detection system .FACP shall be installed in suitable cabinet inside control buildi ng. Supply, Laying of cable inside building between detectors, MCP, hooter and FAC including glanding, termination, ferruling, dressing etc. at both ends. Supply & installation of cable trays (if necessary), supply of erection materials, cable ferrules, cable lugs, c able tie etc. for successful commissioning of FACP. Following items are included in the Fire Alarm Control Panel (FACP):-"
-
-
-
... More
2 loop, Addressable, Intelligent Fire Detection and Alarm Panel for automatic fire detection & annunciation of alarms for various ty pes of detectors installed like multi sensor, heat detectors, response indicators, loop isolators, manual call points, hooters etc installed in plant area and various buildings as per tender specifications
1
312921
-
... More
Addressable Multisensor Detectors, along with all mounting & other accessories for installation as per the tender specifications.
22
102518
-
... More
Addressable Manual Call Point (for Safe area) along with all mounting & other accessories as per the tender specifications.
6
41909
-
... More
Addressable Hooters (for Safe area) along with all mounting & other accessories as per the tender specifications.
1
6999
-
... More
Response indicators used in below false ceiling and cable trench along with all mounting & other accessories as per tender specifica tions
12
13780
-
... More
Manual Call Point (Explosion Proof & Weather Proof) for hazardous area along with all mounting & other accessories as per tender spe cifications
4
49520
-
... More
Beacons (Explosion Proof & Weather Proof) for hazardous area along with all mounting & other accessories as per tender specification s
2
27624
-
... More
Portable Gas Detectors (lEL,Methane) with controller , audio visual alrm and suitable(instrinsically safe) for hazardous area classi fied as classification Class I , Div I Group C&D as per API-RP-500 as per tender specification
2
133975
-
... More
"CCTV System Design, detailed engineering, supply, configuration, testing, installation, erection and commissioning of CCTV system. Folllowing items are included in the CCTV System:-"
-
-
-
... More
1/3" Day-Night Colour True IP Network Fixed Camera ( Bullet Type) , focal length 4 to 8 mm or better, with IP 66 weatherproof housi ng, in-built lightning & surge protection, suitable mount, camera mounted interfacing junction box as applicable complete with cable s, connectors, required interfaces etc. as per tender specifications including necessary erection hardware, poles, brackets etc. wit h flexible / rigid conduit and all other accessories as required.
12
1215181
-
... More
Day Night colour PTZ Dome camera, with 15X to 20 X optical zoom alongwith IP66 weatherproof housing with IR illuminator , industr ial grade power supply , camera interfacing junction box as applicable , lightening & surge protection and suitable mount , complete with cables , connectors , required interfaces etc as per tender specifications
2
259970
-
... More
IP based 1/4 "" CCD day night colour PTZ camera (explosion proof), for surviellance of pump shed /field piping area with motorized zoom lens (focal length 4 to 80 mm or better) , 15X to 20 X optical zoom, minimum 10X digital zoom , explosion proof & IP66 weathe rproof camera enclosure with IR illuminator , industrial grade power supply , receiver driver unit, camera interfacing junction box as applicable , Explosion proof connecting conduits, glands and other accessories as per oEM recommendation, as per specifications lightening & surge protection and suitable mount , complete with cables , connectors , required interfaces etc as per tender speci fications
1
841336
-
... More
Network Video Recorder/Failover NVR hardware as per specifications with 16 TB storage. The NVR Server shall be rack mount suitable for installation in Server Cabinet.
1
363719
-
... More
Client Workstation along with licensed Operating System Software, Keyboard with Joystick (KVM Switch) along with required cables, c onnectors, interfaces with suitable mounting of worksattion and its acessories in complete as per specifications.
1
134968
-
... More
CAT 6 cable and cabling from field cameras to CCTV control system. Cable for outdoor buried shall be as per specifications
250
14761
-
... More
supply of 5 to 6 meter pole for mounting of CCTV as per technical specifications of the Tender
16
229946
-
... More
16 port Ethernet POE Switch
1
120570
-
... More
"Cables, Cables Trays and Junction boxes Supply, laying, installation, erection of signals cable from field instruments to junction boxes including termination, ferruling, d ressing etc. Supply of cable trays, cables glands, junction boxes, erection materials, cable ferrules, cable lugs, cable tie. Installation and erection of cable trays and junction boxes."
-
-
-
... More
Supply of Cables
-
-
-
... More
SIZE: 2P X1.5 SQMM
300
22949
-
... More
SIZE: 12C X1.5 SQMM
300
42869
-
... More
"CABLE LAYING: Laying of armoured / unarmoured cables (control / signalling/ Triad/ LT cable etc.) and installation / pulling of t elephone cables of all type in trenches, in cable racks, in trays, in protective pipes, poles, columns, in conduits, in panels, in buildings, walls, ceilings, and on structures etc.; including the supply and installation of all required materials such as fixing clamps, screws, cable straps, tags etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect,as per specifications,drawings and directions of the SiteEngineer, includi ng cost of all labour, tools, consumable materials etc. and cutting the cables in required lengths. Following items are included in Cable Laying:"
-
-
-
... More
Cables having outer diameter upto 20mm
600
45489
-
... More
ELECTRICAL WORKS
-
-
-
... More
Earthing System & Lightning Protection System
-
-
-
... More
Supply, installation, testing, commissioning for complete earthing, earth electrodes/ pit, earth main ring, earthing of electrical e quipment, instrument panels, field instruments, process equipment and pipes/ flanges including all associated, excavation, concrete cutting, restoration, civil works with all materials and labours as per specification and drawings approved by the company. All GI m aterial shall be hot dip galvanized. SS nut bolts to be used for Copper earthing and clamps of the GI earthing which are operated on regular basis i.e. clamp connections at top.
-
-
-
... More
Supply, Installation, testing & commissioning of Conventional /Maintenance free Earthing with GI earth pipe, 3.0 mtr long, 100 mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement etc, (with charcoal and s alt ) as required as per IS 3043. .
8
97717
-
... More
GI Strip (50X6) mm
300
82549
-
... More
GI Strip (25X3) mm
150
19163
-
... More
Copper Strip (25X3) mm
50
30529
-
... More
10 Sq mm GI wire rope
50
7491
-
... More
35 Sq mm GI wire rope
10
1175
-
... More
Supply, Installation of 16 Ways Earthing Plate copper
2
6662
-
... More
Supply, installation, testing & commissioning of lightning conductor finial made of 25 mm dia 1800 mm long GI tube having single pro ng at top with 85 mm dia 3 mm thick GI base plate including holes etc. Complete as required as per IEC 62305 hall be supplied, insta lled, tested as per tender specification.
2
18619
-
... More
Supply, installation, testing & commissioning of GI strip of 25 x 3 mm thick on parapet or surface of wall for lightning conductor c omplete with joints and other accessories as required. (For horizontal run)
60
12487
-
... More
Supply, installation, testing & commissioning of GI tape of 25 x 3 mm thick on parapet or surface of wall for lightning conductor co mplete with joints and other accessories as required. (For vertical run)
60
15059
-
... More
Earth GI Pits- GI earth pipe, 3.0 mtr long, 100 mm dia including accessories and providing masonary enclosure with cover plate havin g locking arrangement etc, with charcoal / coke and salt as required as per IS 3043.
2
23836
-
... More
Cable
-
-
-
... More
Supply, Installation & Laying, testing & commissioning with including cable glands, lugs and termination for aluminium conductor XLP E insulated armoured served sheated FRLS cables 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S clamp etc. of su itable size or as directed by engineer incharge, complete in all respect, the armouring with fire retararted cable shall be properly connected with the earth conductor by clamps etc.Cable shall include, cable tags, cable marker, double compressed brass cable gland s, brass adapter/reducers/nipples, fixing of metallic anchor fasteners for supporting of cable trays and misc. electrical switchgear including all labour and materials complete as required and as per directions of Engineer-In-Charge.
-
-
-
... More
3.5Cx25 mm2 A2XFY
50
5478
-
... More
4Cx 16 mm2 A2XFY
50
4843
-
... More
4Cx 4 mm2 A2XWY
100
13970
-
... More
3Cx 6 mm2 2XWY
100
16911
-
... More
3Cx 2.5 mm2 2XWY
1850
123492
-
... More
Illumination System
-
-
-
... More
Supply, installation, testing, commissioning of lighting fixtures complete with mounting bracket, flame proof, control gear box as p er the type of fixture, lamps etc. including pipe inserts for cables and connecting work, with all material and labour as per specif ications, drawings and instruction of Engineer-in-charge. Work to be completed in all respects.
-
-
-
... More
Supply, installation, testing, commissioning of Area lighting, integral flame proof well glass fixture/Bulk head (CMIFR approved for Zone-1/2 gas group IIA & IIB) with 110 W LED luminaire with flame proof control gear of Baliga make or equivalent)
35
380373
-
... More
Supply, installation, testing, commissioning of Area lighting pole 7 mtr high GI octagonal pole complete with bracket, flameproof JB at bottom of pole, GI clamps for fixing flame proof control gear box, cable from JB to fixture, flame proof gland, including all ci vil works, labours and complete materials, as per standard drawing & specification
35
359437
-
... More
Supply, installation, testing, commissioning of FLP & WP 8 way junction box with 20 nos terminal supply including connection and ter mination of earthing wire and conduit including suppluy and installation of double compression cable gland including all civil wor ks, labours and complete materials, as per standard drawing & specification
3
40132
-
... More
" Supply , installation, testing and commissioning of TPN lighting / AC Distribution board of approved make as per appendix -1, with rating and feeders as per specification. The DB shall be of IP-42 protection class and shall conform to IS 8623. The board shall be fitted with an acrylic door Type IV DIstribution Board : Double Door Translucent Euro DB of Havells or approved make as per appendix -1, having 100 A TPN Copper Bus bar, 1x63 A TPN MCB , 1x63 A RCCB (100 mA Sensitivity), 4nos 32A TP MCB +3x32 A DP MCB + 4x16 A DP MCB + 4x16A SP MCB as per specification as required as per SLD. "
1
92366
-
... More
Supply, Installation, Testing & Commissioning
-
-
-
... More
Electrical Building Internal lighting Wiring
-
-
-
... More
Supply, Installation, testing & commissioning of Wiring for lighting fixtures & ceiling fan points point (1 fan controlled by 1 mo dular switch) with 2.5 sq. mm FRLS PVC insulated copper conductor three core cable/wire in surface/ recesses steel conduit in roof & PVC conduit in wall, with modular switch , modular plate, suitable GI box and earthing the point with 1.5 sq.mm.FR PVC insulated co pper conductor single/ three core wire etc as required.
48
94954
-
... More
Supply, Installation, testing & commissioning of Wiring for small power & Exhaust/wall Fan and ceiling fan point with 2.5 sq. mm FRLS PVC insulated copper conductor three core cable/wire in surface/ recesses steel conduit, with modular switch, modular plate, s uitable GI box, providing & fixing of 5 pin 6 A modular socket and 10 A modular switch near the door or as per the specification an d darwings and earthing the point with 1.5 sq.mm.FR PVC insulated copper conductor single/ three core cable/wire complete with Junct ion box. etc as required.The circuit wirig shall be with 4 sqmm PVC copper wire from switchboard to 1st exhaust fan for multiple exh aust fan in one circuit.
10
20911
-
... More
Supply, Installation, testing & commissioning of Wiring for 250 V single phase and neutral 16 amp modular power plug point with PVC insulated 4 sqmm copper conductor wires for phases and neutral, 650 v grade including all the materials metal boxes earthing t he third pin with 2.5 sqmm copper conductor earthing insulated continuity wire complete with providing and fixing of 6 pin 16/6A m odular socket and 20/10 A modular switch (1 plug point per circuit) as per specifications and darwing
15
47082
-
... More
1 X 36/40 Watts, Bajaj Flexitron VIVA or equivalent : Supply and fixing of surface mounted Bajaj Flexitron VIVA light fitting of PH ILLIPS or equivalent approved make complete with all accessories such as LED module, driver, optics, thermal sink, connector blocks etc including installation
25
53724
-
... More
Supply, Installation, testing & commissioning of FLP type light 1x40 W or equivalent LED Industrial light fixture Double compre ssion Ni plated brass cable glands, lugs hardware and all other accessories in all respects.
4
30447
-
... More
LED Ceiling Point: Supply and fixing of surface mounted LED ceiling light fitting type Mainstream spot Aura 15W of PHILLIPS or equiv alent approved make complete with all accessories such as LED module, driver, optics, thermal sink, connector blocks etc including i nstallation
12
25602
-
... More
supply, installation, testing & commissioning of Point wiring for power plug point with 4 sq.mm stranded PVC insulated copper wire i ncluding earthing the third pin with 2.5 sq. mm copper insulated earthing wire complete with supply and fixing of recessed mounted i ndustrial type 3 pin 32 A metal clad socket and plug, 20A MCB (Motor duty) housed in a 16 gauge M.S. Box
3
10567
-
... More
Supply, Installation, testing & commissioning of Ceiling Fan of 1200mm sweep complete erected in position with all accessories.
6
10060
-
... More
Supply, installation, testing of single phase 230 V, industrial type heavy duty exhaust fan of 12" sweep GEC/Usha/Crompton Greaves o r of approved make as per appendix -1 fitted/ provided with louvres, supports etc. including making the required opening on walls, f ixing and connecting the wires etc. including earthing the body of the fan, making good the opening on the wall etc. complete as per specifications, drawings and direction of Site Engineer including the cost of all labour, tools, materials etc. complete.
7
41594
-
... More
Supply, Installation, testing & commissioning of FLP type 12" dia IP 65 Exhaust Fan with louvers complete in all respects includin g supporting frame, bolts,FLP type double compression gland and plug for sealing all spare entries
2
29300
-
... More
25 mm dia PVC Conduit with ISI marked: Supply, installation, fixing in position, in concrete, brick work, etc. during or after const ruction by making grooves in the wall, ceiling etc. cutting threads and jointing the pipes with PVC couplers, providing necessary te es, bends, JBs, etc. with 12 SWG GI wire inside conduit without joint for concealed wiring, including making good the concrete, bric k work, surface etc. complete as per drawings and direction of Site Engineer in charge including cost of all labour, materials etc.
105
15828
-
... More
Supply, Installation, testing and commissioning of latest model (5 stars BEE certified) 1.8 T split AC complete with remote, 5 KVA s tablizer, 12 Hr timer, MS Stand for outdoor unit,refrigerant piping, drain piping etc complete as per instruction of EIC.
3
319619
-
... More
Supply, Installation of Chequred plate 8 mm thick, Scope including Cutting, fabrication, painting & installation at site works
300
31413
-
... More
Site misc. items
-
-
-
... More
Supply and installation of vitreous enamel caution boards suitable for 440 V as per IS 255 including fixing on the wall with all th e required hardware etc. complete in English / Hindi/ Local Language.
2
3402
-
... More
Supply and installation of Shock hazard charts complete with Wooden frame with front glass and laminated A3 size colour print (in En glish / Hindi / Local Language).
2
3246
-
... More
Supply, Installation & Laying of Insulating mat (2 or 2.5mm thick X 0.9 or 1Mtr w , 11 KV) as per IS15652/IEC61111
2
4715
-
... More
Supply of Pairs of Rubber hand gloves IS Mark, 1.1 kV
2
2774
-
... More
Supply, Installation of Fiirst aid box with Snake serum
2
3309
-
... More
Supply, Installation, testing & commissioning of Hand operated Siren of range 500m as per PNGRB Guidelines
1
13776
-
... More
"Supply, Installation, testing & commissioning of 230 V, Electrical Siren of range 500m as per PNGRB Guidelines FIRE: Siren shall be wailing sound for 2 minutes. DISASTER: waiting siren 2min + gap 1min + siren 2min +gap 1min +waiting siren 2min. ALL CLEAR: Siren shall be straight run sound for 2 minutes. TEST SIREN: Siren shall be straight run sound for 2 minutes”"
1
30947
-
... More
HDPE Cable Conduit
-
-
-
... More
Supply,and laying along with excavation, concreate cutting & restoration of following sizes of HDPE /GI Pipe in required length fixe d on steel, concrete or similar structure, laid in trenches, ready to be buried in concrete including cutting, bending along with ne cessary pipe fittings such as bends , socket,elbow,tees, etcand similar works, supply of clamps, small iron structures, spacers and installation of seats, plugs, bushings etc., civil works and its materials, including all labour and materials complete as per appr oved drawings and directions of Engineer-In-Charge.
-
-
-
... More
50 mm NB
250
164155
-
... More
100 mm NB
20
26091
-
... More
Cable Tray
-
-
-
... More
"Supply, Installation & fixing of prefabricated GI cable trays of width 50mm, 150mm,300mm,450mm, 600mm as per site requirement for l aying of cables with standard rung spacing.Load for support span of 2.5 mtr as 10, 30, 60,75 & 90 (in kg/mtr) respectively with co ncentric static load as 70 kg at the centre with matrerial labour tools and tackles consumables (as per IS 2629) including bends , tee, crosses,horizontal, insert plate, tray supports and vertical splices etc. as required including supply of all G.I hardwares, civil works and its materials, all labour and material as required as per standard drawings, specification and direction of Enginee r-in-charge. Perforated type, made from 50mm height and 2.0 mm thick sheet steel & galvanized (microns as per IS) "
500
91367
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements