Indian Oil Corporation Limited Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Indian Oil Corporation Limited - IOCL Tender
Eprocure
Opening Date21 Jan 2025
Closing Soon4 Feb 2025
Tender Amount₹ 14,58,463.08
Costs
EMD
₹ 36,400Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Annual Rate Contract For Housekeeping, Civil, Horticulture, Mechanical, Hse, Electrical And T And I Works At Serpl Rajahmundry
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_ERBBS_183294_1Tender No
SERPL/BBS/TS/2024-25/099Tender Authority
Indian Oil Corporation Limited ViewPurchaser Address
-Website
http://https://www.iocl.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Bidders_help_Document_for_Preferencial_ Bidding_20230207_v1
Special_Instructions_to_the_Bidders_20230207_version_1a
BOQ Items
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, all works up to any lead and lift, as directed by the Engineer-in-Charge :In all kinds of soil
30
208
246.37
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
5
2242
2646.07
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 cement : 3 coarse sand (Zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)
5
7033
8300.07
... More
RCC: Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 [1 cement : 1.5 coarse sand (Zone-III) derived from natural sources
5
8861
10456.96
... More
1:1.5:3 [1 cement : 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources]
5
10684
12608.1
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in :Cement mortar 1: 4 (1 cement : 4 coarse sand)
14
7320
8638.77
... More
Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)
5
8966
10580.26
... More
12 mm cement plaster of mix :1:4 (1 cement : 4 fine sand)
100
306
361.54
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
500
116
137.86
... More
Providing and fixing Stainless Steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts comple te, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of require d size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of the Engineer-in-Charge. [Note : For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.]
100
660
779.63
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level : Thermo-Mechanically Treated bars of grade Fe-500D or more
500
95
113.13
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Above plinth level : Thermo-Mechanically Treated bars of grade Fe-500D or more
500
95
113.13
... More
Providing and fixing LUXALON 75C & 225C un-perforated Aluminium panel coloured ceiling manufactured by M/s. HUNTER DOUGLAS INDIA or any other approved equivalent brand, each panel consisting of 75/225 mm wide x 15.5 mm deep and 0.5 mm thick with bevel edged panel made from enamelled corrosion resistance aluminium alloy AA-5050 (Al.Mg), each panel to abut each other with a narrow 'V' groove, clipping with a baked enamelled aluminium panel carrier of 32 mm wide x 39 mm deep x 0.95 mm thick in standard length of 5 metres made of double baked enamelled aluminium alloy AA-5050 (Al.Mg) black with cutouts to hold the panels in a module of 75 mm closed at a di stance of 1.25 metre, each panel carrier suspended by means of G.I. suspension rod 4 mm diameter and a galvanised supsension spring clip at a distance of 1.7 metre centre to centre, making openings for light fittings etc. with suitable peimeter framing all complet e as per manufacturer's recommendation and directions of the Engineer-in-Charge. [Note: Measurement shall be made wall to wall witho ut any deduction for openings, for payment purpose].
5
6741
7954.83
... More
Providing and laying flamed finish Granite stone slab (Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent) flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings wit h 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cemen t slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. a ll complete as specified and as directed by the Engineer-in-Charge.
10
2843
3355.18
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the Manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 ce ment : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joints with white cement and matching pigments etc., complete :Size of Tile 600x600 mm
10
1722
2033
... More
Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) :Dark shade pigment using ordinary cement
6
1065
1257.29
... More
Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with ceme nt mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per directions of the Engineer -in-Charge. [Notes: (1) Length of finished kerb edging shall be measured for payment. (2) Old kerb stones shall be supplied by the d epartment free of cost.]
20
95
112.38
... More
Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the directions of the Engineer-in-Charge. [Note: Old CC paver blocks shall be supplied by the department free of cost].
50
372
439.23
... More
Providing and laying factory made chamfered edge interlocking Cement Concrete paver blocks in foot path, park & lawns driveway or li ght & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & directions of the Engineer-in-Charge :60mm thick Cement Concrete paver block of M-35 grade with approved colour, design & pattern.
50
1015
1198.68
... More
Supplying and laying flat brick soling in foundation trench, in floors, garages, sumps, etc., with bricks of class designation 50 laid to proper slope, level and grade etc. filling of the joints with sand etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
50
715
844.27
... More
Providing and laying non-pressure NP-2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :300mm dia. R.C.C. pipe
10
866
1022.15
... More
Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1.0 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars.
6
2445
2885.8
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obta ined. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations] :Nominal concrete 1:3:6 or richer mix (including equivalent design mix)
6
1994
2353.96
... More
Demolishing brick work in cement mortar manually or by mechanical means including stacking of serviceable material and disposal of u nserviceable material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed du ring day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations]
6
1687
1991.47
... More
Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per directions of the Engineer-in-Charge.
100
107
127.42
... More
SANITARY ITEMS (SOR)
-
-
-
... More
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :White solid plastic seat with lid
2
655
773.6
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
2
1473
1738.32
... More
Internal Work - Concealed in wall: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This i ncludes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same inclu ding testing of joints complete as per directions of the Engineer-in-Charge :20 mm nominal dia pipes
24
548
647.81
... More
Internal Work - Concealed in wall: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per directions of the Engineer-in-Charge :32 mm nominal dia pipes
10
779
920.14
... More
External Work: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water suppl y including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per directions of the Engineer-in-Charge :32 mm nominal dia pipes
10
474
560.49
... More
External Work: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per directions of the Engineer-in-Charge :40 mm nominal dia pipes
24
616
727.2
... More
External Work: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per directions of the Engineer-in-Charge :50 mm nominal dia pipes
10
908
1072.56
... More
External Work: Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. :40 mm dia nominal bore
10
554
654.58
... More
External Work: Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. :50 mm dia nominal bore
50
648
765.68
... More
Providing and fixing 15mm diameter C.P. brass angle valve as per following with C.P. copper connecting pipe 375mm long or as required including nuts, washers, C.P. brass flange, etc. including cutting & making good the walls wherever required, etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge :Angle Valve (Ref. Make: JAQUAR, Model: Cat. No. 0053 or approved equivalent)
8
1734
2046.39
... More
Providing and fixing 15mm diameter C.P. brass stop cock with wall flange (Ref. Make: JAQUAR, Model: Cat. No. 0933 or approved equivalent), male end with C.P. copper connecting pipe 375mm long or as required including nuts, washers, C.P. brass flange etc. including cutting & making good the walls wherever required complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge.
2
1794
2117.97
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms :15 mm nominal bore
2
710
838.37
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS-8931 :15 mm nominal bore
2
696
821.36
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS-8931 :15 mm nomin al bore
2
610
720.77
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS-8931 :15 mm nominal bore
2
481
567.6
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore
2
778
919.11
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore
2
997
1177.63
... More
Providing and fixing on wall face Unplasticised Rigid PVC (uPVC) rainwater pipes (110 mm diameter, single socketed) conforming to IS :13592 Type-A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion.
14
350
413.28
... More
Providing and fixing white vitreous china pedestal type water closet (European type) (Ref. Make: HINDWARE, Model: Cat No.-20058 or equivalent approved) with seat and lid, 10 litre low level white vitreous china dual flushing cistern (Ref. Make: HINDWARE, Model: Ca t No.-21028 or equivalent approved) & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with spe cials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and bracket s, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
1
7829
9238.22
... More
DOOR AND WINDOW ITEMS (SOR)
-
-
-
... More
Providing and fixing approved stainless steel finished tower bolts (barrel type) 10 mm diameter & 200 mm long with screws etc. compl ete as per drawings, specification and directions of the Engineer-in-Charge.
2
845
997.63
... More
Providing and fixing Spring Door Closer of approved make & quality with necessary accessories, screws etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Ch arge.
2
1736
2049.33
... More
Providing and fixing, on fixed glazing/ doors/ window panes, sun control film "HP NATURAL 35 SAFETY COMBINATION FILM-4Mil" of M/s. G ARWARE or approved equivalent make and shade, all complete as per manufacturer's specification and as per directions of the Engineer -in-Charge.
10
1151
1358.42
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket et c. complete as per the architectural drawings and directions of the Engineer-in-Charge. [Note: Cost of aluminium snap beading shall be paid in basic item] :With float glass panes of 5.50 mm thickness
10
1488
1756.41
... More
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quali ty with necessary screws etc. complete.
2
925
1092.61
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent o r dyed to required colour or shade, with necessary screws etc. complete :125 mm
5
68
80.82
... More
Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges with necessary screws etc. complete : 100x75x3.50 mm.
2
55
65.03
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand lo go embossed on the body / plate with double spring mechanism and door weight up to 125 kg., for doors, including cost of cutting flo ors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge:With stainless steel cover plate minimum 1.25 mm thickness.
4
2769
3268.53
... More
PAINTING ITEMS (SOR)
-
-
-
... More
Re-lettering with black Japan paint of approved brand and manufacture. [Note: Unit "EA" shall mean "PER LETTER PER CM HEIGHT"].
30000
3
4.06
... More
Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/10 sqm) on exist ing cement paint surface.
200
114
135.33
... More
Applying priming coat :With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ s teel works.
300
58
68.69
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats o n old work
900
91
108.31
... More
Painting with aluminium paint of approved brand and manufacture to give an even shade :One or more coats on old work
50
84
99.24
... More
Painting with oil type wood preservative of approved brand and manufacture :Old work (one or more coats)
20
38
45.93
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wa ll surface to prepare the surface even and smooth complete.
50
132
156
... More
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content :With water thinnable cement primer on wall surface having VOC content less than 50 grams/ litre.
50
68
81.28
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M. S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connect ion with the building etc wherever required for inspection of work at required locations with essential safety features for the work men etc. complete as per directions and approval of the Engineer-in-Charge. The elevational area of the scaffolding shall be measure d for payment purpose. The payment will be made once irrespective of duration of scaffolding. [Note: This item to be used for mainte nance work judicially, necessary deduction for scaffolding in the existing item to be done]
50
296
349.48
... More
CLEANING ITEMS (SOR)
-
-
-
... More
Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
40000
7
8.67
... More
Cleaning of terrace/ loft water storage tank (inside surface area) up to 2000 litre capacity at all heights with coconut brushes, du ster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and d isposing of malba, all complete as per the directions of Engineer-in-Charge. [Note: The old date already written on tank should be r emoved with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be ma de @ Rs. 0.10 per litre if during cleaning any G.I. fittings or ball cock is damaged that is to be repaired by the Contractor at his own cost and nothing extra will be paid on this account].
24000
-
0.46
... More
Supply of tractor with trailer on hire charges for 08 hours per day including rendering the services of 4 labourers driver, fuel and other consumables, tools, tackles etc. for transportation of rubbish/ waste materials complete as per directions of Engineer-in-Charge.(8 hours working period of one tractor is considered as one tractor day). Unit "EACH" (EA) stands for tractor days.
20
4566
5388.61
... More
Through cleaning of paved and unpaved areas, roads, road side berms, broming removal of scraps and other unwanted left over materials including removal of chockage in the drains, removal of chockage from the road side / pave or unpaved area side drains and disposal of the rubbish etc. to the nearest garbage bin or as directly by Engineer-in-charge including laboures, broom, trolley and other consumables etc.complete.
36000
1
1.78
... More
Cleaning the tiles, lavatory, flooring, urinals etc. by removing stains etc. by using Vim powder / cleaning powder / ISI grade black phenyle / while phenyle / Acid / Naptha balls / Coir brushes / wire brushes / Finit in required proportion to make the area clean and free from all dust, dirt and stains etc. including cost of all labour and materials complete. (Only floor area shall be measured).
3000
3
4.7
... More
Cleaning and desilting of drains, side slopes in or under water or above water level and along drain both sides upto 1.0 metre width including removal of grass, bushes, vegetation, debris, sludge and any other unwanted material and disposal of the same at places a s directed by Engineer-in-Charge within owner's premises including all labour, materials, tools, tackles, transportation for all lea d and lifts as directed.: Cross section of drain upto 2.0 sqm.
200
10
12.53
... More
HORTICULTURE ITEMS (SOR)
-
-
-
... More
Supplying and stacking of good earth at site including royalty and carriage up to any lead complete. [Note: Volume of earth measured in stacks will be reduced by 20% for payment].
50
630
744.33
... More
Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surp lus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with e arth or earth mixed with sludge or/ and manure before and after flooding trench with water. [Note: The rate is excluding cost of imp orted earth, sludge or manure].
50
92
108.91
... More
Providing and laying Neelgiri/ Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level an d ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning w ith sprinkler and maintenance for 30 days or more till the grass establish properly, complete as per direction of the Engineer-in-Ch arge.
100
283
334.91
... More
Plantation of Trees, Shrubs and Hedges at site including watering and removal of unserviceable materials as per direction of the Eng ineer-in-Charge (excluding cost of plant & water):Tree Plant
500
8
10.14
... More
Plantation of Trees, Shrubs and Hedges at site including watering and removal of unserviceable materials as per direction of the Eng ineer-in-Charge (excluding cost of plant & water):Shrub Plant
1000
4
5.07
... More
Plantation of Trees, Shrubs and Hedges at site including watering and removal of unserviceable materials as per direction of the Eng ineer-in-Charge (excluding cost of plant & water):Hedge Plant/ Ground Cove
1000
2
3.4
... More
Supply and planting sapling (not less than 45 cm in height and 60 cm centre to centre) of Casurina, Labrum, Gulmohar, Ashokas, Bottl e Palm, Bougenvilla, Hibiscus, Roses or other approved type of variety of plants, watering & maintenance for 30 days minimum complet e in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engine er-in-Charge.
40
591
698.21
... More
Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos (3 Nos horizontal & 4 Nos vertical “U“ shape) M.S. wires of 3.5 m m dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of the Engineer-in-Charge.Top inside diameter 35 cm, outer bottom diameter 25 cm, total height 35 cm with wall thickness of 25.4 mm
100
289
341.63
... More
Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos (3 Nos horizontal & 4 Nos vertical “U“ shape) M.S. wires of 3.5 m m dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of the Engineer-in-Charge.Top inside diameter 30 cm, outer bottom diameter 20 cm, total height 30 cm with wall thickness of 25.4 mm
100
210
248.81
... More
Providing & fixing of White River (Stone) Pebbles size of 2" to 2.50" dia in natural colour at site of work including loading, unloa ding, carriage and all taxes paid etc.and as per directions of the Engineer-in-Charge.
10
796
940.21
... More
Supplying and stacking of well decayed cattle manure at site including royalty and carriage up to any lead complete. [Note: Volume o f cattle manure measured in stacks will reduced by 8% for payment].
50
309
365.34
... More
Anti-termite treatment of lawn area using PREMISE 30.50% IP. One litre PREMISE diluted in 499 litres of water and applying solution @ 1.00 litre per sqm of lawn or bed area (two applications are required) including cost of chemical complete as per directions of th e Engineer-in-Charge.
1000
10
11.8
... More
PEST CONTROL ITEMS (NON SOR)
-
-
-
... More
Providing comprehensive pest control services to the building, sheds, cable trenches, drains and other facilities of the establishme nt, to control the nuisance of various pests including (but not limited to) rodents, snakes, lizards, beehives, cockroaches, mosquit oes, Red and Black ants, crawling pests, house flies, fruit flies, etc. Job includes placing / injecting rodenticide baits, glue tra ys, snake repellent and other chemicals, insecticides, Fogging/fumigation, Removal of bee hives below ground (in trenches upto depth of 1m) and above ground (up to height of 15m), complete with all labours, materials, tools, and tackles, equipments, consumables et c complete. Periodicity of scheduled pest control activities shall be monthly, while ad hoc requirement shall be as and when require d as directed by EIC whose decision shall be final. Area of measurement for pest control application shall be designated by EIC. Rat e is For (PER SQM PER MONTH)
192000
1
2.27
... More
Providing and fixing acrylic name display boards - 1st acrylic backing layer shall be of 5mm thickness with eco solvent vinyl colou r print of text/image/message as proivded by EIC. 2nd acrylic front layer of transparent sheet of 03mm thickness. Displayboard shall be fixed on wall using SS studs/bolts as per instruction of EIC. Rates are inclusive of providing and fixing boards
50
506
598.05
... More
Vinyl printing of verious SOPs, Statutory displays boards, materials, safety slogans etc, complete as per specification and directio n of EIC/SE complete in all respects inclusive of cost of all labour, materials, tools, tackels etc
500
67
79.61
... More
Flexon hoarding: Supply, transportation and installation of flex/banner (260gsm with solvent print) on hoarding after removing exist ing flex/any other material from hoarding board.
600
15
18.77
... More
Art Painting/design paintinmg on all surfaces at all height with Luxol High Gloss synthetic enamel paint of M/s Berger paints/ Apcol ite of M/s Asian Paints/ Brolac of M/s J&N of any colours as directed by EIC including lettering if required with all labour and mat erials in complete.
600
48
57.78
... More
Mechanical & HSE Works Variable Part: (Rates to be quoted by the bidder)
-
-
-
... More
Supply and Erection of Structural Steel: Supplying at site, steel structural items such as steel plates, bars, chequered plates, angles, beams channels, commercial quality h eavy pipes, C.I. Rollers, bolts & nuts, washers, grouting bolts, padding plates etc., fabrication and erection of saddle supports an d other type of supports for pipes manifolds and valves, fabrication and erection of platforms walkways, stairways etc., sand blast/ power brush cleaning, priming and painting the finished structures including supply of all other inputs such as labour, materials, consumable etc. necessary to perform and complete the work in all respect, in accordance with drawings, specifications and instructi ons of the Site Engineer / EIC.
1
122198
144193.99
... More
Supply and Erection of Electroforged Grating: Supplying at site, steel structural items such as steel plates, bars, fabrication of gratings by electroforged method, after comple te fabrication entire gratings shall be Hot Dip galvanized, gratings shall be normany of size 810mm X 250mm for steps and 1200mm X 1 000 mm or 810mm X 1000 mm for platforms / walkways, or any size as advised by EIC. Placing gratings in a replaceable mannerbolting w ith base frame of ISA by suitable GI clamps and GI fasteners, including supply of all other inputs such as labour, materials, consum able etc. necessary to perform and complete the work in all respect, in accordance with drawings, specifications and instructions of the Site Engineer / EIC.
0.2
206061
243152.02
... More
Supply and Erection of GI Structural: Supplying at site, GI structural items such as flat, bars, chequered plates, angles, beams cha nnels, commercial quality pipes,bolts & nuts, washers, grouting bolts, fabrication and erection of various structures items includin g supply of all other inputs such as labour, materials, consumable etc. necessary to perform and complete the work in all respect, i n accordance with drawings, specifications and instructions of the Site Engineer / EIC.
300
218
257.85
... More
Surface preparation of piping, equipment and valves etc. by abrasive blast cleaning or with power wire brush (wherever blast cleanin g is not possible) confirming to SA 2.5, making the surface free of dust, grease, mill scales etc., application of 1 coat x 50-75 mi crons DFT of Inorganic Zinc Ethyl Slicate Primer, followed by application of sealer coat of 30 micron DFT and intermediate coat of 1 50 micron DFT with surface tolerant epoxy mastic paint and 2 coats x 50 micron each DFT of Isocynate Aliphatic Poly Urethene (PU) by airless spray, with approved materials, paints, tools, tackles, consulambles, non-consumables, labour, equipment etc. to complete t he job in all respects as per specification and instructions of the Site Engineer / EIC. The total DFT shall be minimum 330 microns. :External Painting of Piping/ Equipment
30
1496
1765.56
... More
Reflective radium sticker letter printing and apply in background stickering including pasting and fixing with supply of all manpowe r, equipments, tools, tackles, consumables, non-consumables, scaffolding (separate SOR item) working at any height etc. as per instr uction of EIC/ Site Engineer to complete work in all respects. :Radium sticker lettering
20
1710
2018.48
... More
Reflective radium sticker printing (background sticker) and apply including pasting and fixing with supply of all manpower, equipmen ts, tools, tackles, consumables, non-consumables, scaffolding (separate SOR item) working at any height etc. as per instruction of E IC/ Site Engineer to complete work in all respects.: Radium sticker background
50
1665
1965.43
... More
Cleaning exposed steel surfaces of piping, equipment and valves etc. by abrasive blasting or with power wire brush (wherever sand bl ast cleaning is not possible) free of dust, grease, mill scales etc. and applying single layer polyurethane coating(PU) using 100% s olvent free elastomeric plyurethane/ liquid epoxy, with approved materials, labour, equipment etc. and completing the job in all res pects as per specification and instructions of the Site Engineer / EIC. :PU /liquid epoxy Coating of under ground piping
30
2580
3045.01
... More
Supply of Spiral wound metallic gaskets as per technical specifications from approved/reputed make/vendor as specified in tender doc ument: 16" SWMG ANSI 150#
15
682
804.82
... More
Supply of Spiral wound metallic gaskets as per technical specifications from approved/reputed make/vendor as specified in tender doc ument: 12" SWMG ANSI 150#
40
521
615.81
... More
Supply of Spiral wound metallic gaskets as per technical specifications from approved/reputed make/vendor as specified in tender doc ument: 4" SWMG ANSI 150#
25
194
229.25
... More
Supply of Spiral wound metallic gaskets as per technical specifications from approved/reputed make/vendor as specified in tender doc ument 2" SWMG ANSI 150#
30
102
120.71
... More
Supply of Spiral wound metallic gaskets as per technical specifications from approved/reputed make/vendor as specified in tender doc ument 1" SWMG ANSI 150#
20
63
74.38
... More
Supply of Spiral wound metallic gaskets as per technical specifications from approved/reputed make/vendor as specified in tender doc ument 16" SWMG ANSI 600#
10
1090
1286.51
... More
Supply of Spiral wound metallic gaskets as per technical specifications from approved/reputed make/vendor as specified in tender doc ument 8" SWMG ANSI 600#
6
832
982.86
... More
Supply of Spiral wound metallic gaskets as per technical specifications from approved/reputed make/vendor as specified in tender doc ument 6" SWMG ANSI 600#
30
624
736.53
... More
Supply of Spiral wound metallic gaskets as per technical specifications from approved/reputed make/vendor as specified in tender doc ument 4" SWMG ANSI 600#
10
416
491.42
... More
Supply of Spiral wound metallic gaskets as per technical specifications from approved/reputed make/vendor as specified in tender doc ument 3" SWMG ANSI 600#
10
313
369.48
... More
Supply of Spiral wound metallic gaskets as per technical specifications from approved/reputed make/vendor as specified in tender doc ument 2" SWMG ANSI 600#
20
208
246.33
... More
Supply of Spiral wound metallic gaskets as per technical specifications from approved/reputed make/vendor as specified in tender doc ument 1" SWMG ANSI 600#
15
111
131.69
... More
Supply of Spiral wound metallic gaskets as per technical specifications from approved/reputed make/vendor as specified in tender doc ument 16" SWMG ANSI 900#
10
1803
2127.92
... More
Supply of Spiral wound metallic gaskets as per technical specifications from approved/reputed make/vendor as specified in tender doc ument 14" SWMG ANSI 900#
20
1554
1834.03
... More
Supply of Spiral wound metallic gaskets as per technical specifications from approved/reputed make/vendor as specified in tender doc ument 8" SWMG ANSI 900#
6
941
1110.9
... More
Supply of Spiral wound metallic gaskets as per technical specifications from approved/reputed make/vendor as specified in tender doc ument 2" SWMG ANSI 900#
10
215
254.86
... More
Supply of Spiral wound metallic gaskets as per technical specifications from approved/reputed make/vendor as specified in tender doc ument 1" SWMG ANSI 900#
10
98
115.84
... More
Supply of Fire Fighting Equipment : Type B delivery Hoses of 15M length bearing IS-636 mark
2
5451
6432.53
... More
Supply of Fire Fighting Equipment : Universal Nozzle
5
5764
6802.03
... More
Supply of Fire Fighting Equipment : Safety Helmet
40
388
458.5
... More
Supply of Fire Fighting Equipment : Strecher WITH BLANKET
5
5566
6567.89
... More
Supply of Fire Fighting Equipment : Safety Torch
4
4334
5114.32
... More
Supply of Fire Fighting Equipment : Wind socks
8
3624
4276.57
... More
Supply of Fire Fighting Equipment : Red & Green flag (Pairs) 2 nos in each colour
2
1594
1881.59
... More
Supply of Fire Fighting Equipment : Dry Chemical Powder silliconised potassiun bicarbonate type IS marked, pack in 10Kg
60
356
420.71
... More
Supply of Fire Fighting Equipment CO2 cartridge - 200 gm capacity for 9 kg
20
679
802.39
... More
Supply of Fire Fighting Equipment CO2 cartridge - 3.2 kg capacity for 75 kg DCP extinguisher
2
5385
6354.49
... More
Supply of PTFE Rolls (Tefflon tape rolls) - 12 meter length
100
18
21.87
... More
Supply of Anabond 666 T - 100 gm tube
10
91
108.3
... More
Supply of Locktite 222 - 50 ml
5
449
529.87
... More
Supply of Loctite 242 - 50 ml
50
449
529.87
... More
Supply of Loctite 275 - 50 ml
2
877
1034.93
... More
Supply of Loctite Chisel Paint Striper - 510 gm
25
863
1019.13
... More
Supply of Brasso (Policing Liquid) - 500 ml.
5
168
199.18
... More
Supply of AC 90 Rust remover - 500GM
40
218
257.58
... More
Supply of Cotton Hand Gloves (Dotted) - Standard Set
30
11
13.62
... More
Supply of Asbesto Hand Gloves - Standard
10
103
121.84
... More
Safety Goggles - Standard
20
77
90.86
... More
Supply of DPT Test Kit (Developer+Cleaner+Penetrant) - Standard Size Spray
4
419
495.46
... More
Supply of Cotton Waste - Jute
100
38
45.71
... More
Supplying and operating of JCB (including fuel & driver) for excavation, grading, clearing of grass, uprooting of tress, etc
300
1433
1690.95
... More
Providing Hydra 12 Ton Capacity for works as directed by EIC/Site Engg.
200
1516
1789.86
... More
Maintenance and Inspection of DCP and CO2 fire extinguishers which includes checking the weight of cylinder, condition of threads of cap, discharge tube, sharpness of piercing pin and cylinder body,Refilling of DCP(owner supplied powder) if required and submission of reports. 9 kg DCP extinguisher
500
74
88.43
... More
Maintenance and Inspection of DCP and CO2 fire extinguishers which includes checking the weight of cylinder, condition of threads of cap, discharge tube, sharpness of piercing pin and cylinder body,Refilling of DCP(owner supplied powder) if required and submission of reports. 75 kg DCP extinguisher
192
75
88.65
... More
Maintenance and Inspection of DCP and CO2 fire extinguishers which includes checking the weight of cylinder, condition of threads of cap, discharge tube, sharpness of piercing pin and cylinder body,Refilling of DCP(owner supplied powder) if required and submission of reports. 2 KG Clean Agent extinguisher
600
58
69.27
... More
Maintenance and Inspection of DCP and CO2 fire extinguishers which includes checking the weight of cylinder, condition of threads of cap, discharge tube, sharpness of piercing pin and cylinder body,Refilling of DCP(owner supplied powder) if required and submission of reports. 4.5 kg CO2 extinguisher
500
63
75.32
... More
Maintenance and Inspection of DCP and CO2 fire extinguishers which includes checking the weight of cylinder, condition of threads of cap, discharge tube, sharpness of piercing pin and cylinder body,Refilling of DCP(owner supplied powder) if required and submission of reports. 6.5 kg CO2 extinguisher
192
67
79.38
... More
Maintenance and Inspection of DCP and CO2 fire extinguishers which includes checking the weight of cylinder, condition of threads of cap, discharge tube, sharpness of piercing pin and cylinder body,Refilling of DCP(owner supplied powder) if required and submission of reports. 2 Kg CO2 Extinguisher
400
38
45.3
... More
Supply of CO2 & Refilling of CO2 gas in cartidges for using in 10kg DCP extinguishers including all & labour, transportation etc.. c omplete as per specification and direction of EIC/Site-Engineer.( CO2 CARTRIDGE OF 200 gms)
100
64
76.59
... More
Hydrostatic testing of fire hoses at 9 Kg/ sq cm
200
43
51.91
... More
Supply of spares of fire fighting equipments: Safety clip ( metal) with nylon thread
104
13
15.6
... More
Supply of spares of fire fighting equipments:DCP extinguisher cap washer
864
12
15.02
... More
Supply of spares of fire fighting equipments:Discharge tube washer
32
4
5.43
... More
Supply of spares of fire fighting equipments:HDPE discharge horn for 4.5 Kg capacity CO2 extinguisher with fittings
126
115
136.42
... More
Supply of spares of fire fighting equipments: HDPE discharge horn for 6.8 Kg capacity CO2 extinguisher with fittings
50
569
672.48
... More
Supply of spares of fire fighting equipments:CO2 valve open wheel
20
61
72.83
... More
Supply of spares of fire fighting equipments:Safety pin with nylon string for CO2 extinguisher
10
27
32.26
... More
Supply of spares of fire fighting equipments:Supply & fitting fire hydrant disc washer
20
40
47.87
... More
Supply of spares of fire fighting equipments:Fire hydrant/ fire hose coupling washer
20
31
37.49
... More
Supply & fitting of rubber beeding of the complete one hose box ( bothdoors) as per direction of EIC including removing of worn out rubber beeding,labour charges, tools & tackles etc.complete in all respect.
20
61
72.46
... More
Supply & fitting of glass of hose box wherever required complete in all respect inclusive of material, labour,consumables etc.(Consi der rate for one door glass only)
2
49
58.42
... More
Supply & fitting of glass of Manual Call Points wherever required complete in all respect inclusive of material, labour,consumables etc
20
22
26.03
... More
Supply of hammer for breaking glass of Manual Call points / Hose boxes / Emergency tool box
2
83
99.04
... More
Fixing up of clamps of extinguisher in wall including supply of clamps, screws etc and drilling, fitting extinguisher to complete th e work in all respect as per direction of EIC / site engineer
20
52
62.45
... More
Supply & fitting of clamps for hanging 2Kg & 4.5Kg Co2 extinguisher on & wall including labour charges, tools tackles &consumables complete in all respect as per direction of EIC.
2
86
102.25
... More
Supply of Barricading tapes
20
531
627.04
... More
FIRE HYDRANT VALVE: Supply of PVC blank cap with chain for male and female 63 mm coupling
40
37
44.06
... More
FIRE HYDRANT VALVE: Supply and installation of lugs for hydrant landing valve
40
173
204.87
... More
FIRE HYDRANT VALVE: Supply of brass lock for monitor
6
303
358.58
... More
FIRE HYDRANT VALVE: Supply of drain valve of Monitor SS 1/2" NPT
6
240
284.12
... More
Hydrotesting and refilling of 2 Kg/4.5 Kg/6.8 Kg CO2 Fire Extinguishers
130
471
556.78
... More
Electrical Works Variable Part: (Rates to be quoted by the bidder)
-
-
-
... More
Aluminium LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overal l sheathed, Stranded, FRLSH, C2, Smoke density40%: AL,3CX10 mm²,A2XFY
500
80
95.1
... More
Aluminium LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overal l sheathed, Stranded, FRLSH, C2, Smoke density40% : AL,4CX16 mm²,A2XFY
500
98
115.65
... More
Aluminium LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overal l sheathed, Stranded, FRLSH, C2, Smoke density40%: AL,3.5CX25 mm²,A2XFY
500
125
147.83
... More
SAFETY EQUIPMENT - Supplying the following Safety Equipment as per directions of Site Engineer / Engineer-in-Charge complete in all respects including transportation charges: RUBBER HAND GLOVES: Rubber hand gloves suitable for 11/6.6 KV operation with ISI mark.
4
3099
3656.86
... More
SAFETY EQUIPMENT - Supplying the following Safety Equipment as per directions of Site Engineer / Engineer-in-Charge complete in all respects including transportation charges: Supply and installation of 11/6.6 KV Discharge Rod
1
9023
10647.45
... More
SAFETY EQUIPMENT - Supplying the following Safety Equipment as per directions of Site Engineer / Engineer-in-Charge complete in all respects including transportation charges: Supply and installation of 33 KV Discharge Rod
1
8203
9680.6
... More
INSULATING MATS - Supply & installation of 2000 mm X 1000 mm and of thickness as mentioned below, approved quality insulating Elasto mer mats as per specifications: Insulating Elastomer mats conforming to IS 15652:2006 of thickness 2 mm (Class A)
10
2757
3253.71
... More
INSULATING MATS - Supply & installation of 2000 mm X 1000 mm and of thickness as mentioned below, approved quality insulating Elasto mer mats as per specifications: Insulating Elastomer mats conforming to IS 15652:2006 of thickness 2.5 mm (Class B)
5
2742
3236.65
... More
CABLE TRENCH: Excavation in unpaved areas of earth in work sites for conventional cable trenches for a depth upto 1.5 metres inclu ding shoring, strutting etc. (if necessary), backfilling the trench, job complete in all respects, including all labour and ma terials complete as per drawings, specification and directions of Site Engineer / Engineer-in-Charge
50
684
808.26
... More
WBM ROAD / CONCRETE BREAKING: WBM Road/concrete breaking for cable trenches including required shoring strutting etc., and repairing of the road/dyke to original condition and disposing off excess materials (within the work site) job complete in all respec ts including the cost of labour, tools, materials, load, lift hire charges of equipments, if any, complete as per drawings, spe cification and directions of Site Engineer / Engineer-in-Charge.
2
4488
5296.14
... More
Cable Laying - Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cabl e racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and inst allation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all la bour, tools, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions o f Site Engineer / Engineer-in-Charge: Power cables LT : OD upto 20 mm
500
36
42.67
... More
Cable Laying - Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cabl e racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and inst allation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all la bour, tools, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions o f Site Engineer / Engineer-in-Charge: Power cables LT : OD above 20 mm and upto 40 mm
500
51
61.25
... More
Cable Laying - Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cabl e racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and inst allation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all la bour, tools, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions o f Site Engineer / Engineer-in-Charge: Power cables LT : OD above 40 mm and upto 60 mm
500
82
97.88
... More
Cable Laying - Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cabl e racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and inst allation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all la bour, tools, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions o f Site Engineer / Engineer-in-Charge: Power cables LT : OD above 60 mm
500
74
87.98
... More
Cable Laying - Laying of all type of cables HT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cabl e racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and inst allation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all la bour, tools, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions o f Site Engineer / Engineer-in-Charge: Power cables HT
300
125
147.58
... More
Cable Laying - Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cabl e racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and inst allation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all la bour, tools, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions o f Site Engineer / Engineer-in-Charge: Control cables (T&I) : OD upto 20 mm
500
79
94.18
... More
Cable Laying - Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cabl e racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and inst allation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all la bour, tools, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions o f Site Engineer / Engineer-in-Charge: Control cables (T&I) : OD above 20 mm and upto 30 mm
200
91
108.05
... More
Cable Laying - Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cabl e racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and inst allation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all la bour, tools, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions o f Site Engineer / Engineer-in-Charge: Control cables (T&I) : OD above 30 mm and upto 40 mm
200
114
134.97
... More
GI CABLE TRAY: Supply, installation & fixing of prefabricated perforated GI cable trays with tray cover of width 150 mm, 300 mm, 450 mm & 600 mm as per site requirement for laying of cables with standard rung spacings. Load for support span of 2.5 meter as 30, 60, 75 & 90 (in Kg/Mtr) respectively with concentric static load as 70 Kg at the centre, with materials, labour, tools and tackles, con sumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge.
250
193
228.55
... More
SAND FILLING: Supplying and spreading of approved quality fine dry river sand in cable trenches including the cost of all material, transport, load and lift charges, labour, tools and tackles, consumables etc , as per drawings, specification and directions of S ite Engineer / Engineer-in-Charge
10
851
1005.08
... More
BRICK SOLING: Supply and laying of approved quality 75 mm thick second class brick flat soling with sand filling in the interstices, in cable trenches for protectionincluding the cost of all brick and sand, labour, load and lift charges , tools and tackles etc , a s per drawings, specification and directions of Site Engineer / Engineer-in-Charge.
50
877
1035.99
... More
CABLE MARKER: Supply, erection & installation of MS cable markers, including excavation, installation of the markers, cement concret e grouting, backfilling, materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge.
10
2451
2893.1
... More
HT CABLE JOINT: Making straight-through joint on 6.6 / 11 KV Aluminium/Copper XLPE/PVC insulated armoured screened cable, including the supply of required materials such as cable jointing kit (of heat shrinkable sleeve type of Raychem / M-seal / 3M), materials, l abour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge: For cables of size upto 3 core x 400 sqmm
1
39251
46316.51
... More
LT Cable joint (1.1 KV) - Making straight through joints on Al/Cu conductor XLPE/PVC insulated armoured cable including the supply o f required materials such as cable jointing kit (of heat shrinkable sleeve type of Raychem/Mseal/3M) , materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge: Power cables LT : OD upto 20 mm
3
4812
5679.19
... More
LT Cable joint (1.1 KV) - Making straight through joints on Al/Cu conductor XLPE/PVC insulated armoured cable including the supply o f required materials such as cable jointing kit (of heat shrinkable sleeve type of Raychem/Mseal/3M) , materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge: Power cables LT : OD above 20 mm and upto 40 mm
2
5865
6921.71
... More
LT Cable joint (1.1 KV) - Making straight through joints on Al/Cu conductor XLPE/PVC insulated armoured cable including the supply o f required materials such as cable jointing kit (of heat shrinkable sleeve type of Raychem/Mseal/3M) , materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge: Power cables LT : OD above 40 mm and upto 60 mm
2
8291
9783.93
... More
LT Cable joint (1.1 KV) - Making straight through joints on Al/Cu conductor XLPE/PVC insulated armoured cable including the supply o f required materials such as cable jointing kit (of heat shrinkable sleeve type of Raychem/Mseal/3M) , materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge: Power cables LT : OD above 60 mm
2
12675
14957.64
... More
HT Cable Termination (6.6/11 KV) - Supply, termination and connection of XLPE cable termination kit (indoor type), heat shrinkable s leeve type of Raychem/M-Seal/CCI make with all accessories, including cutting (tools and accessories for termination should meet the selected standards), stripping of cable insulation providing copper cable end lugs and cable glands as required, restoration of ins ulation, supplying and providing the cable supporting clamps, straps, cable tags connection to the terminals of HT panel, VFDs, Isol ators, transformer, DG,MLPU/Booster pump motors etc., earthing of armouring, materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge: HT Cable of size above 3Cx240 sq. mm
1
24236
28598.9
... More
EARTH ELECTRODES: Supplying, installation, testing of GI earthing electrode, including the supply and installation of the CI cover, charcoal /special backfill etc. and construction of chamber; complete as per drawings,specifications and directions of the Site En gineer, Including the cost of all labour, tools, materials etc. complete in all respects.
1
16181
19093.63
... More
CHEMICAL EARTHPIT: Supply, installation, testing and commissioning of ACE (Artificial concept of earthing with chemical rod) Chemrod earthing electrode by digging earthing Item includes the supply and installation of the CI/RCC cover in the earth pit, backfilling etc. and construction of chamber; complete including excavation, backfilling and supply of all materials required for making earth p it as per drawings, specifications and directions of the Site Engineer, Including the cost of all labour, tools, materials etc. comp lete in all respects.
1
17474
20619.65
... More
EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cable for completely making the eart hing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing grid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer -in-charge, including the cost of all labour, tools, materials, etc. complete in all respect: 50 mm X 6 mm G.I. earthing strip
100
292
344.74
... More
EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cable for completely making the eart hing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing grid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer -in-charge, including the cost of all labour, tools, materials, etc. complete in all respect: 40 mm X 5 mm G.I. earthing strip
100
204
241.22
... More
EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cable for completely making the eart hing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing grid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer -in-charge, including the cost of all labour, tools, materials, etc. complete in all respect: GI wire (8 SWG)
200
65
77.31
... More
EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cable for completely making the eart hing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing grid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer -in-charge, including the cost of all labour, tools, materials, etc. complete in all respect: GI wire / rope 35 sq. mm
100
142
167.64
... More
EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cable for completely making the eart hing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing grid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer -in-charge, including the cost of all labour, tools, materials, etc. complete in all respect: GI wire / rope 10 mm diameter
50
171
202.92
... More
EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cable for completely making the eart hing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing grid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer -in-charge, including the cost of all labour, tools, materials, etc. complete in all respect: Copper cable as per specifications - 1 00 Sq.mm
20
2095
2473.08
... More
EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cable for completely making the eart hing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing grid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer -in-charge, including the cost of all labour, tools, materials, etc. complete in all respect: Copper cable as per specifications - 1 0 Sq.mm
50
195
231.08
... More
Supply, erection & installation of cable conduits made up of GI pipes of medium class 'B' subject to owner's approval in trenches (a lready made), on walls, concrete structure etc., including supply and installation of all the necessary pipe fittings such as bends, sockets, elbows, tees etc., bending, threading, binding, clamping, providings, spacers, plugs, packings, bushings etc., as required Job complete in all respects including the cost of all labour, tools, material etc. and as per specifications and directions of s ite engineer / Engineer-in-Charge: 25 mm
20
469
553.62
... More
Supply, erection & installation of cable conduits made up of GI pipes of medium class 'B' subject to owner's approval in trenches (a lready made), on walls, concrete structure etc., including supply and installation of all the necessary pipe fittings such as bends, sockets, elbows, tees etc., bending, threading, binding, clamping, providings, spacers, plugs, packings, bushings etc., as required Job complete in all respects including the cost of all labour, tools, material etc. and as per specifications and directions of s ite engineer / Engineer-in-Charge: 37 mm
20
610
720.44
... More
Supply, erection & installation of cable conduits made up of GI pipes of medium class 'B' subject to owner's approval in trenches (a lready made), on walls, concrete structure etc., including supply and installation of all the necessary pipe fittings such as bends, sockets, elbows, tees etc., bending, threading, binding, clamping, providings, spacers, plugs, packings, bushings etc., as required Job complete in all respects including the cost of all labour, tools, material etc. and as per specifications and directions of s ite engineer / Engineer-in-Charge: 50 mm
20
981
1157.64
... More
Supply, erection & installation of cable conduits made up of GI pipes of medium class 'B' subject to owner's approval in trenches (a lready made), on walls, concrete structure etc., including supply and installation of all the necessary pipe fittings such as bends, sockets, elbows, tees etc., bending, threading, binding, clamping, providings, spacers, plugs, packings, bushings etc., as required Job complete in all respects including the cost of all labour, tools, material etc. and as per specifications and directions of s ite engineer / Engineer-in-Charge: 100 mm
10
1816
2144.01
... More
STEEL STRUCTURAL WORKS:Supply, fabrication, erection, installation of steel structural works of any type and shape such as cable rak s, cable trays, push button control posts etc., as required job complete in all respects including the cost of all labour, tools, m aterial etc., complete.and as per specifications and directions of site engineer/ Engineer-in-Charge.
250
141
167.16
... More
SHOCK TREATMENT CHART: Supply and installation of shock treatment chart framed in good quality glass in English / Hindi / Local Lan guage.
3
2217
2616.51
... More
CAUTION BOARD: Supply and installation of vitreous enamel caution boards suitable for 440 V/11KV/6.6 KV as per IS 255 including fix ing on the wall with all the required hardware etc. complete in English / Hindi/ Local Language.
5
2214
2613.5
... More
STAINLESS STEEL INSCRIPTION PLATE: Supply and installation of approved quality stainless steel name inscription plates including ano dising, engraving the inscriptions, providing screws, etc. for equipments viz. motors, motor control centres, switchgears, push butt on stations etc. as required, providing necessary holes tapping etc. and fixing the same complete in all respect as per the directio n of Site Engineer/Engineer-in-charge including the cost of all labour, tools etc.
5
1019
1203.27
... More
Point wiring - Supplying, installation and testing with 1.5 Sq.mm stranded PVC insulated copper conductor wires for phase & neutral of 650V grade including earthing by providing 1.5 Sq.mm earth insulated continutity wire of copper in PVC conduit (Supply & installa tion of PVC conduit covered elsewhere in SOR) recessed on wall/ceiling/ false celing including supply & installation of switch boxes ,junction boxes, pull boxes, bushes, screws, check nuts, bends, modular switches and sockets . The circuit wiring with 4 Sq.mm PVC copper wire from D.B. to switchboard as required is also in the scope of the contractor: 1 light point controlled by 1 switch
5
1288
1520.14
... More
Point wiring - Supplying, installation and testing with 1.5 Sq.mm stranded PVC insulated copper conductor wires for phase & neutral of 650V grade including earthing by providing 1.5 Sq.mm earth insulated continutity wire of copper in PVC conduit (Supply & installa tion of PVC conduit covered elsewhere in SOR) recessed on wall/ceiling/ false celing including supply & installation of switch boxes ,junction boxes, pull boxes, bushes, screws, check nuts, bends, modular switches and sockets . The circuit wiring with 4 Sq.mm PVC copper wire from D.B. to switchboard as required is also in the scope of the contractor: 2 light points controlled by 1 switch
5
1581
1866.55
... More
Ceiling fan wiring: Wiring with PVC insulated 2.5 sqmm copper conductor wire for fan points (1 fan point controlled by 1 modular swi tch) including providing space for electronic regulator in switch box, providing and fixing fan hook in the ceiling as per specifica tions and drawings.
2
2061
2432.61
... More
Exhaust fan / wall bracket fan wiring: Wiring with PVC insulated 2.5 sqmm copper conductor wire for phase & neutral , 650 V grade in cluding earthing , the third pin with 1.5 sqmm copper conductor earthing insulated continuity wire for exhaust/ wall bracket fan inc luding providing and fixing of 5 pin 6 A modular socket and 10 A modular switch near the door or as as per specifications and drawin gs. The circuit wiring shall be with 4 sq. mm PVC copper wire from switchboard to 1st exhaust fan for multiple exhaust fans in one c ircuit.
2
2110
2490.93
... More
16 A power plug point wiring: Wiring for 250 V single phase and neutral 16 amps modular power plug point with PVC insulated 4 sq. m m. copper conductor wires for phase & neutral, 650 V grade including earthing, the third pin with 2.5 sq. mm copper conductor earthi ng insulated continuity wire, complete with providing and fixing of 6 pin 16/6A modular socket and 20/10 A modular switch (1 plug po int per circuit) as per specifications and drawings
2
3214
3793.28
... More
6 A plug point wiring: Wiring for 250 V single phase and neutral 6 amps modular plug point with PVC insulated 2.5 sq. mm. copper con ductor wires for phase & neutral, 650 V grade including earthing, the third pin with 1.5 sq. mm copper conductor earthing insulated continuity wire, complete with providing and fixing of 5 pin 6A modular socket and 10 A modular switch (1 plug point per circuit) as per specifications and drawings.
2
2339
2760.42
... More
Ceiling fan: Ceiling fan, BEE 5 star rated, with electronic regulator & other accessories and fittings etc. of or approved make with 56" Sweep size
5
3450
4071.99
... More
PVC Conduit pipes - Supply, installation, fixing in position, PVC conduit pipes, of ISI marked , in concrete, brick work etc. during or after construction by making grooves in the wall, ceiling etc. cutting threads and jointing the pipes with PVC couplers, providi ng necessary tees, bends, junction boxes etc. with 12 SWG GI wire inside conduit without joint for concealed wiring, including makin g good the concrete, brick work, surfaces etc. complete as per drawings and direction of Site Engineer / Engineer-in-charge includin g cost of all labour, materials etc.: 19mm
20
110
130.64
... More
PVC Conduit pipes - Supply, installation, fixing in position, PVC conduit pipes, of ISI marked , in concrete, brick work etc. during or after construction by making grooves in the wall, ceiling etc. cutting threads and jointing the pipes with PVC couplers, providi ng necessary tees, bends, junction boxes etc. with 12 SWG GI wire inside conduit without joint for concealed wiring, including makin g good the concrete, brick work, surfaces etc. complete as per drawings and direction of Site Engineer / Engineer-in-charge includin g cost of all labour, materials etc.: 25mm
20
157
185.5
... More
PVC Conduit pipes - Supply, installation, fixing in position, PVC conduit pipes, of ISI marked , in concrete, brick work etc. during or after construction by making grooves in the wall, ceiling etc. cutting threads and jointing the pipes with PVC couplers, providi ng necessary tees, bends, junction boxes etc. with 12 SWG GI wire inside conduit without joint for concealed wiring, including makin g good the concrete, brick work, surfaces etc. complete as per drawings and direction of Site Engineer / Engineer-in-charge includin g cost of all labour, materials etc.: 32mm
20
188
222.62
... More
LIGHTNING ARRESTOR : Supply of lightning arrestors with insulating base fittings etc. as per specifications For 30 kV rated voltage (Highest system voltage 36 KV) , 10 KA lightening arrestors
3
28104
33163.29
... More
HT TERMINATION KIT : Supply of indoor / outdoor HT cable termination kit complete in all respect for the following sizes of cables a s per specifications 3CX240/300/400 SQMM,33kV(UE),OUTDOOR/INDOOR TYPE
1
62583
73849.06
... More
T TERMINATION KIT : Supply of indoor / outdoor HT cable termination kit complete in all respect for the following sizes of cables as per specifications 3CX400 SQMM, 6.6KV(UE), INDOOR TYPE
1
12941
15271.05
... More
HT TERMINATION KIT : Supply of indoor / outdoor HT cable termination kit complete in all respect for the following sizes of cables a s per specifications 3CX400 SQMM, 6.6KV(UE), OUTDOOR TYPE
1
13265
15652.79
... More
Supply of discharge rod with earthing arrangement suitable for 33 KV voltage level
1
11278
13308.91
... More
Supply of hand Gloves suitable for 33 KV voltage level
4
1897
2238.97
... More
Supply of 2000mm x1000 mm, 3 mm thick(Class B)Elastomer mats conforming to IS: 15652:2006
5
3943
4653.45
... More
FILTRATION OF TRANSFORMER OIL Filtration of transformer oil by stream line filter machine provided by the contractor for improving t he insulation strength of oil to the required strength as per pacification given below (excluding the supply of oil. a) Filtration o f transformer oil till desired bdv is attained as per is. b) Topping up of oil. c) Releasing all the air from air release plug & buc holz relay. d) To and fro transportation of filter machine and equipments.
28000
15
17.84
... More
Providing salt and charcoal for pipe earth electrode as required. 64 kg charcoal and 5 kg salt
20
790
933.03
... More
REWINDING OF MOTORS: Rewinding of 1-phase/3-phase electrical motors of various voltage grades/makes/types and of following capacitie s as per the original specifications & types/gauge of rewinding/winding wire, insulation of various points inside slots/overhang and overall final layers of insulation/tapes as per the original motor specifications, after baking to required temperature and applyin g insulating varnish (Dr-Beck & Co. make & type), providing glass/other types of sleaves on connection wires from inside motor windi ng to connection plate. The winding, varnishing, tapes and other materials required for completion of this complete job is in the sc ope of contractor excluding transportation to & from Owner’s works to Contractor's rewinding shop. which shall be paid seperately on trip basis.The winding wire will be Devi Dayal make and insulation tapes shall be ISI marked & of reputed manufacturers as per deci sion of Engineer-in- Charge. This also includes repair/replacement of connection plate completely including insulating sheet, nuts, bolts, washers and other hardwares as per original specifications. This further includes replacement of bearings (DE & NDE) of SKF m ake & greasing (IOC/HP make Servogem 2 or equivalent). This further includes satisfactory trial of motors at Owner’s premises at No load as well as at Full load. The Contractor will guarantee the rewound motors for satisfactory performance for a period of minimum six months at owner’s premises & if any such rewound motor fails within six months, it is to be rewound again by Contractor free of cost. All complete with labour and materials as per directions of Engineer-in-Charge.Note: Burnt winding wire shall be kept by Contr actor. Bearing Shall be supplied by IOCL: Motors upto & including 1.5 KW
2
2013
2375.65
... More
REWINDING OF MOTORS: Rewinding of 1-phase/3-phase electrical motors of various voltage grades/makes/types and of following capacitie s as per the original specifications & types/gauge of rewinding/winding wire, insulation of various points inside slots/overhang and overall final layers of insulation/tapes as per the original motor specifications, after baking to required temperature and applyin g insulating varnish (Dr-Beck & Co. make & type), providing glass/other types of sleaves on connection wires from inside motor windi ng to connection plate. The winding, varnishing, tapes and other materials required for completion of this complete job is in the sc ope of contractor excluding transportation to & from Owner’s works to Contractor's rewinding shop. which shall be paid seperately on trip basis.The winding wire will be Devi Dayal make and insulation tapes shall be ISI marked & of reputed manufacturers as per deci sion of Engineer-in- Charge. This also includes repair/replacement of connection plate completely including insulating sheet, nuts, bolts, washers and other hardwares as per original specifications. This further includes replacement of bearings (DE & NDE) of SKF m ake & greasing (IOC/HP make Servogem 2 or equivalent). This further includes satisfactory trial of motors at Owner’s premises at No load as well as at Full load. The Contractor will guarantee the rewound motors for satisfactory performance for a period of minimum six months at owner’s premises & if any such rewound motor fails within six months, it is to be rewound again by Contractor free of cost. All complete with labour and materials as per directions of Engineer-in-Charge.Note: Burnt winding wire shall be kept by Contr actor. Bearing Shall be supplied by IOCL:Motors above 1.5 KW but upto including 3.7KW
2
2358
2782.94
... More
Supply and fixing of led indication lamp in the panels. leds shall be provided with leakage voltage protection upto 40v. Operating v oltage shall be 110V / 220V / 230V /AC /DC, Panel cutouts shall be 22.5 / 25.5 / 30.5 mm. Terminals shall be shrouded for finger pro ofing and safety are with captivated washers to hold two lugged (fork / pin) wires in one terminal. Job includes supply of labor and various undry materials required and finally testing of led's for + following led's: Red / yellow / amber / green / milky white led 's
20
139
165.09
... More
Supply and fixing of led indication lamp in the panels. leds shall be provided with leakage voltage protection upto 40v. Operating v oltage shall be 110V / 220V / 230V /AC /DC, Panel cutouts shall be 22.5 / 25.5 / 30.5 mm. Terminals shall be shrouded for finger pro ofing and safety are with captivated washers to hold two lugged (fork / pin) wires in one terminal. Job includes supply of labor and various undry materials required and finally testing of led's for + following led's: Blue led's
5
233
275.15
... More
LED Light Driver of Flood Lights
10
4944
5834.23
... More
Supply, fixing and connection of following KNIFE TYPE (DIN) / BOLTED HRC fuse link AS PER IS:13703:1993 & IEC 269:1986 of M/S HAVELL /L&T /G EC Astholm/Standard /MDS make or approved equivalent in distribution board etc.all complete with labour and materials as per direction of Engineer-in-charge. 20-32 AMP Size 000
20
285
336.62
... More
Supply, fixing and connection of following KNIFE TYPE (DIN) / BOLTED HRC fuse link AS PER IS:13703:1993 & IEC 269:1986 of M/S HAVELL /L&T /G EC Astholm/Standard /MDS make or approved equivalent in distribution board etc.all complete with labour and materials as per direction of Engineer-in-charge. 63 AMP Size 000
20
325
384.27
... More
Supply, fixing and connection of following KNIFE TYPE (DIN) / BOLTED HRC fuse link AS PER IS:13703:1993 & IEC 269:1986 of M/S HAVELL /L&T /G EC Astholm/Standard /MDS make or approved equivalent in distribution board etc.all complete with labour and materials as per direction of Engineer-in-charge. 125 AMP Size 00
10
409
482.84
... More
Portable Half Cell Supply of Cu- Cuso4 portable Half cell, as per specifications of approved make
2
5503
6494.43
... More
Telecom & Instrumentation Works Variable Part: (Rates to be quoted by the bidder)
-
-
-
... More
Supply of Cable Glands - flame proof and weather proof including EP/WP certificates: 1 1/4" (5/4")Cable Glands
10
374
441.64
... More
Supply of Cable Glands - flame proof and weather proof including EP/WP certificates: 1" Cable Glands
10
236
278.6
... More
Supply of Cable Glands - flame proof and weather proof including EP/WP certificates: 1/2" Cable Glands
10
96
113.45
... More
Supply of Plugs - flame proof and weather proof including EP/WP certificates: 1 1/4" (5/4") Plugs
10
68
80.96
... More
Supply of Plugs - flame proof and weather proof including EP/WP certificates: 1" Cable Plugs
10
66
78.14
... More
Supply of Plugs - flame proof and weather proof including EP/WP certificates: 1/2" Cable Plugs
10
32
38.43
... More
Supply of Power cable 3 core x 2.5 mm2 Armoured, Copper as per tender specifications
500
100
118.52
... More
Supply of pre-fabricated printed KM markers for OFC & HDPE as per tender specifications
10
2147
2533.46
... More
Supply of wall mounted Fibre Termination Box (FMS) for 24F as per tender specifications
5
12707
14994.26
... More
Supply of full range (upto 8 feet) RF iD Disk type Electronic Markers as per tender specifications
10
1817
2144.06
... More
Supply of OFC Jointing kits as per tender specifications for 24F
10
7099
8376.82
... More
Supply of 40 mm OD HDPE pipe as per tender specifications
0.5
55403
65375.54
... More
2V 800AH Battery 2V Spare Cell in dry condition for Tubular Lead Acid OPzS type Battery of 800 AH as per specifications
1
28360
33465.12
... More
2V 500AH Battery 2V Spare Cell in dry condition for Tubular Lead Acid OPzS type Battery of 500 AH as per specifica
1
19421
22917.09
... More
Portable gravity fed emergency eye washer system Portable gravity fed emergency eye washer system
2
5751
6786.73
... More
24F OFC(16 nos. of G.652D + 08 nos. of G.655) 24 Fibre Single Mode Composite Metal Free Optical Fibre Cable (16 nos. of G.652D + 08 nos. of G.65
500
39
46.47
... More
Installation of RF iD type Electronic Markers as per tender specifications. The job includes configuration & programming of the Elec tronic markers to write information data as per directions of Engineer-in-charge/ Site Engineer.
1
451
532.18
... More
Installation of pre-fabricated printed KM markers for OFC & HDPE as per tender specifications, drawings and directions of Engineer-i n-charge/ Site Engineer
1
746
880.28
... More
Installation of OFC Joint pit markers at every joint location as per specifications, drawings and directions of Engineer-in-charge/ Site Engineer
10
673
794.14
... More
Blowing of OFC through laid HDPE, post installation testing of OFC for each fibre for drum laid & maintaining OTDR traces as per the scope, specifications and directions of Engineer-in-charge/ Site Engineer
10
40
47.2
... More
Supply of 5 Pair Armoured PIJF Underground Telephone
500
76
90.39
... More
Supply & Installation of GI pipe with 50 mm nominal diameter
100
468
553.14
... More
Supply of armored Cat 6 UTP Networking Cable as per specifications
200
68
80.7
... More
Supply of CONTROL CABLE(SIZE: 4C X1.5 SQMM )
500
77
91.64
... More
Supply of CONTROL CABLE (SIZE: 12C X1.5 SQMM )
500
195
230.73
... More
Supply of SIGNAL CABLE (SIZE: 2P X1.5 SQMM )
500
103
122.48
... More
Supply of FIELD FITTINGS AND SS TUBES - COASTAL APPLICATION - Process Tube (Process Tube, Material: Stainless Steel)
10
814
960.52
... More
Supply of FIELD FITTINGS AND SS TUBES - COASTAL APPLICATION - Male Connector(Male Connector, 12.7 MM MNPTX 12.7 MM OD)
5
754
890.5
... More
Supply of FIELD FITTINGS AND SS TUBES - COASTAL APPLICATION - Female Connector(Female Connector, 12.7 MM FNPT X 12.7 MM OD Tube)
5
1218
1438.13
... More
Supply of FIELD FITTINGS AND SS TUBES - COASTAL APPLICATION -2 Way Valve Manifold(2 Way Valve Manifold 2 x 12.7 MM FNPT, Material : SS316)
5
6150
7257.3
... More
Supply of FIELD FITTINGS AND SS TUBES - COASTAL APPLICATION - Hex Nipple(Hex Nipple, 12.7 MM MNPT X 12.7 MM MNPT X 80 MM Long,)
5
1015
1197.75
... More
Supply of FIELD FITTINGS AND SS TUBES - COASTAL APPLICATION -Union Tee(Union Tee, 3X12.7 MM OD Tube)
5
2180
2572.79
... More
FIELD FITTINGS AND SS TUBES - COASTAL APPLICATION -Tube End Cap ( Sq Head)(Tube End Cap ( Sq Head), 12.7 MM OD Tube)
5
668
788.9
... More
Supply of FIELD INSTRUMENT - Differential Pressure Trasnmitter(Differential Pressure Transmitter with manifold valves and Cable Glan ds.Range max (0 to 3 kg/cm2).Smart type; accuracy 0.1% or better)
1
44988
53086.44
... More
OFC Splicing charges
100
295
348.54
... More
Manpower Deployment Fixed Part: (Rates not to be quoted by the bidder)
-
-
-
... More
Deployment of Skilled Manpower During Schedule/ Breakdown Maintenance of Equipments in PumpStation/ Stations & Maintenace of Switchy ad for Electrical Department ** ( 2 Skilled labour always present at site for the above mentioned works)
24
46777
55197.99
... More
Deployment of Skilled Manpower During Schedule/ Breakdown Maintenance of Equipments in PumpStation/ Stations for T&I Department ** ( 1 Skilled labour always present at site for the above mentioned works)
24
23388
27599
... More
Deployment of Semi-skilled Manpower During Schedule/ Breakdown Maintenance of Equipments in PumpStation for Mechanical Department ** ( 2- Semi skilled labour always present at site for the above mentioned works)
24
39525
46639.81
... More
Deployment of UnSkilled Manpower as and when required for Cleaning work/ emergency work/breakdown maintenance work ** ( 1 Unskille d labour present at site for the above mentioned works)
300
655
773.24
... More
Cleaning the tiles, lavatory, flooring, urinals of the Work Shop,Store ,Guard room, Control Building, Labourer Toilet,MCC Room,Meter ing Room, Sample Room and Sample room by using the following materials with required proportion.This includes the shifting of leftov er packing materials ,disposal of all swept materials as per instructions of EIC. Including cost of supply of consumables such as b room / Phool Jhhadu, Y-fer, chemicals, phenyle, acid, naptha balls, liquid soap, soap powder & cake, mosquito spray, odonil, room fr eshener (as per requirement) ) ** ( 1 Unskilled labour always present at site for the above mentioned works)
24
17037
20104.32
... More
Regular cleaning, sweeping the floor area of the Main Line Pump Sheds, H T area, SLB & SRB area, OWS area, Vehicle parking area, road area.This includes the shifting of leftover packing materials ,disposal of all swept materials as per instructions of EIC.** ( 1 Unskilled labour always present at site for the above mentioned works) .
24
17037
20104.32
... More
Maintenance of existing and newly made lawns and plants: The job includes, removal of weeds from other plants from the lawn, applyi ng pesticides for pest/rodent control, applying manure /fertilizers for proper growth of the existing lawn/new lawns. The job requir ed three gardners (dedicated on monthly basis). (2 Unskilled labour always present at site for the above mentioned works)
24
34075
40208.64
... More
Over Time working payment to contract workmen - Skilled
300
184
218.01
... More
Over Time working payment to contract workmen - Sem-Skilled
300
153
181.13
... More
Over Time working payment to contract workmen - Un-Skilled
300
131
155.17
... More
Provision for payment of PMJJBY & PMSBY insurance (for 2 years for 9 workmen)
18
456
538.08
... More
Manpower Deployment Variable Part: (Rates to be quoted by the bidder)
-
-
-
... More
Overhead charges for providing manpower (15% of items above manpower items)
24
26676
31478.12
... More
Providing PPE for contract labour (IFR suits, safety shoe & helmets) Once in year to all continuous contract workers(2* 9)
18
8614
10165.18
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%