Indian Oil Corporation Limited Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Indian Oil Corporation Limited - IOCL Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date26 Dec 2022
Closing Date16 Jan 2023
Tender AmountRefer Documents
Costs
EMD
₹ 1,20,600Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_ERBBS_160874_4Bid Award Id
ViewTender No
SERPL/BBS/TS/2022-23/064Tender Authority
Indian Oil Corporation Limited ViewPurchaser Address
-Website
http://https://www.iocl.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Special_Instructions_to_the_Bidders_20221219_version_1a.pdf
Bidders Help Manual for availing Preferential Benefits in IOCL E-Tendering Portal
BOQ Items
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in d epth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5m
40
-
376.37
... More
Excavating, supplying and filling of local earth/ moorum (excluding black cotton soil) (including royalty) by mechanical transport u p to all leads, also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundat ion etc.complete
5
-
555.03
... More
Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material : Beyond 30 cm girth upto and including 60 cm girt h
20
-
652.17
... More
Concrete Work Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering
-
-
-
... More
1:2:4 [1 cement : 2 coarse sand (Zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from n atural sources]
5
-
7484.64
... More
1:3:6 [1 cement : 3 coarse sand (Zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from n atural sources]
5
-
6900.85
... More
1:4:8 [1 cement : 4 coarse sand (Zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from n atural sources]
5
-
6383.21
... More
Centering and shuttering including strutting, propping etc. and removal of formwork for :Foundations, footings, bases for columns fo r PCC work
5
-
314.06
... More
MISCELLANEOUS CONCRETE WORK : Extra for providing and mixing water proofing material in cement concrete work in doses by weight of c ement as per manufacturer's specification. [Note: Unit "KG" shall mean "PER KG PER 50 KG OF CEMENT"].
20
-
62.35
... More
REINFORCED CEMENT CONCRETE :Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of c entering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 [1 cement : 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived fr om natural sources]
5
-
8509.6
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 Degree landings, balconies, shelves, chajja s, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the co st of centering, shuttering, finishing and reinforcement, with : 1:1.5:3 [1 cement : 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived fr om natural sources]
5
-
10764.89
... More
FORM WORK :Centering and shuttering including strutting, propping etc. and removal of form for all heights :Foundations, footings, b ases of columns, etc. for mass concrete
5
-
314.06
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto & a bove plinth level :Thermo-Mechanically Treated bars of grade Fe-500D or more
1000
-
92.06
... More
EXPANSION JOINTS: Providing and filling in position bitumen mix filler of proportion 80 Kg of hot bitumen, 1 Kg of cement and 0.25 c ubic metre of coarse sand for depth per expansion joints.
1
-
23213.24
... More
Supplying and providing non-shrinkable cement grout (SHRINKKOMP 20 or any other equivalent approved brand) for grouting holding down bolts in pocket holes for equipment foundation, including necessary surface preparation mixing of grout, curing as per manufacturer 's recommendation/ specification and directions of the Engineer-in-Charge. [Note: This item shall be operated under specific instruc tions of the Engineer-in-Charge]
20
-
71.32
... More
Brick work with common burnt clay modular bricks of class designation 7.5 in foundation, plinth& above plinth in :Cement mortar 1:4 (1 cement : 4 coarse sand)
5
-
6058.57
... More
Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) non-decorative type, core of block board constru ction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face ven eers on both faces of shutters : 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
4
-
2006.39
... More
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm
20
-
411.96
... More
Providing and fixing Spring Door Closer of approved make & quality with necessary accessories, screws etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Ch arge
10
-
1667.7
... More
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
2
-
94.87
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing i n position and applying a priming coat of approved steel primer all complete.
2
-
112.19
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrange ments for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27. 5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS:4454 (Part-1) and M.S. top co ver of required thickness for rolling shutters : 80 x 1.25 mm M.S. laths with 1.25 mm thick top cover
10
-
3245.96
... More
Providing and fixing Stainless Steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, b uffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts comple te, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of require d size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of the Engineer-in-Charge. [Note : For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, f asteners etc.]
20
-
634.45
... More
Supplying, fabricating, erecting, placing and fixing in position M.S. structural works using rolled/ built up sections for truss, cl addings, bracings, purlins, supporting frames made of joists, tubes, pipes, channels, angles, plates, flats, bars etc. including cut ting to required size welding of joints, fixing anchor plates, including bolts, theading, nuts, washers, sleeves etc. including pre paration of detailed fabrication drawings & submission to the Engineer-in-Charge for approval before start of fabrication, supplying & applying painting with two coats of epoxy paint "EPILUX 155 High Build Enamel over a coat of "EPILUX 610" Primer of M/s BERGER or any other approved equivalent make as per manufacturer’s recommendation, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Excluding the cost of conc rete work).
0.75
-
128482.12
... More
Supplying and fixing, shop fabricated M.S. steel Electroforged Welded Gratings (Hot dip galvanised as per IS:2629 and tested as per IS:2633 and IS:6745) of approved make with quantity of zinc coating shall not be less than 9.0 N/sqm of surface area (0.12 mm unifor m thickness) over drains, stair treads etc., wherever required with maximum size of void/ mesh in the grating limited to 33 mm x 50 mm including welding/ fixing/ clamping to base frame, etc. complete in all respects inclusive of cost of all labour, materials, tool s, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
0.75
-
151017.9
... More
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the directions of the Engineer-in-Charge.
100
-
1002.86
... More
FLOORING Supplying and laying flat brick soling in foundation trench, in floors, garages, sumps, etc., with bricks of class designat ion 50 laid to proper slope, level and grade etc. filling of the joints with sand etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
50
-
687.04
... More
Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) Dark shade pigment using ordinary cement
20
-
1023.15
... More
Providing and laying Polished Granite stone slab (Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent) flooring in required de sign and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 1 8 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. al l complete as specified and as directed by the Engineer-in-Charge.
2
-
3888.18
... More
Supply and fixing Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cem ent : 4 coarse sand) :
40
-
1688.92
... More
Providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of first quality conforming to IS:15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including pointing the joints with white cement and mat ching pigment, etc. complete.
20
-
1021.94
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the Manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 ce ment : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joints with white cement and matching pigments etc., complete : Size of Tile 600x600 mm
25
-
1654.41
... More
Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with gre y cement slurry @ 3.3 Kg/sq.m.
2
-
747.03
... More
CEMENT PLASTER 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement : 4 fine sand)
50
-
339.47
... More
6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams.
50
-
332.58
... More
Neat cement punning.
200
-
69.19
... More
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth comple te.
20
-
216.87
... More
Providing & fixing galvanized chicken wire net 20 Gauge, 20 mm mesh size in plastering work at the junction of RCC Columns/ Beams & brickwork as directed by the Engineer-in-Charge.
20
-
236.54
... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, o f required shade and colour complete, as per manufacturer's specification : Two or more coats on new work
200
-
96.09
... More
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and inc luding priming coat of exterior primer applied @ 2.20kg/10 sqm
20
-
255.79
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete : On steel & concrete work
100
-
209.2
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work
200
-
134.01
... More
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work
20
-
141.84
... More
Lettering with black Japan paint of approved brand and manufacture. [Note: Unit "EA" shall mean "PER LETTER PER CM HEIGHT"].
200
-
5.18
... More
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratch es etc. complete.
200
-
15.66
... More
Distempering with 1st quality acrylic distemper (Ready Mix) having VOC content less than 50 gms/litre, of approved brand and manufac ture to give an even shade : Old work (one or more coats)
200
-
59.86
... More
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
200
-
20.12
... More
Finishing walls with textured exterior paint of required shade : Old work (Two or more coats on existing cement paint surface applie d @ 3.28 ltr/10 sqm.
100
-
186.05
... More
Repair to plaster of thickness 12 mm to 20 mm in patches of area up to 2.5 SQM including cutting the patch in proper shape, raking o ut joints, preparing and plastering the wall surface etc. complete, including disposal of rubbish at unobjectionable area outside Ow nder's premises, all complete as per directions of the Engineer-in-Charge : With cement mortar 1:4 (1 cement : 4 fine sand)
100
-
460.63
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M. S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connect ion with the building etc wherever required for inspection of work at required locations with essential safety features for the work men etc. complete as per directions and approval of the Engineer-in-Charge. The elevational area of the scaffolding shall be measure d for payment purpose. The payment will be made once irrespective of duration of scaffolding. [Note: This item to be used for mainte nance work judicially, necessary deduction for scaffolding in the existing item to be done]
400
-
284.4
... More
Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/ honey-comb area of concrete/ mason ry by suitable gun/ pump at required pressure including cutting of nipples after curing etc. complete as per directions of the Engin eer-in-Charge. [Note: The payment shall be made on the basis of actual weight of approved grout injected] : Epoxy injection grout in Concrete/ RCC work of approved make.
2
-
873.54
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obta ined. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations]
20
-
1915.59
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations. (3) Cutting of all reinforcement shall be done using hack saw or chiesel or any other method as approved by the Engineer-in-Charge]
10
-
2794.58
... More
Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work as per direction of the Engineer-in-Charge . [Notes: (1) Cutting of all reinforcement shall be done using hack saw or chiesel or any other method as approved by the Engineer-i n-Charge. (2) Payment shall be made on the cross sectional area of R.C.C. or R.B. work]
4
-
951.87
... More
Demolishing brick work in cement mortar manually or by mechanical means including stacking of serviceable material and disposal of u nserviceable material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed du ring day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations]
20
-
1620.61
... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead : For thickness of tiles 10 mm to 25 mm
100
-
60.47
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dump ing ground within 50 metres lead.
200
-
43
... More
Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilo metre, as per the directions of Engineer-in-Charge.
20
-
354.19
... More
Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, tr ansporting, unloading to approved municipal dumping ground or as approved by the Engineer-in-Charge, beyond 50 m initial lead, for a ll leads including all lifts involved.
100
-
153.09
... More
Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic materi al by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank hea ter and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the ro ad surface of all dirt, seals, oil, grease and foreign material etc. complete as per directions of the Engineer-in-Charge and accord ance with applicable specifications.
10
-
669.56
... More
Providing and fixing post delineators made of ABS round body fitted with 2 nos. 100 mm dia high reflective reflectors and mounted on MS pipe of 65 mm dia duly powder coated anti-rust and anti theft steel to be installed as per directions of the Engineer-in-Charge.
50
-
787.7
... More
Providing and laying factory made chamfered edge interlocking Cement Concrete paver blocks in foot path, park & lawns driveway or li ght & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in req uired colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver b locks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & directions of the Engineer-in-Charge : 60mm thick Cement Concrete paver block of M-35 grade with approved colour, design & pattern .
75
-
975.46
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thi ckness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc . as per directions of the Engineer-in-Charge. [Notes: (1) Length of finished kerb edging shall be measured for payment. (2) Precast C.C. kerb stones shall be approved by the Engineer-in-Charge.]
15
-
9234.97
... More
Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceab le material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre l ead as per directions of the Engineer-in-Charge.
2
-
30.93
... More
Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserv iceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 me tre lead as per directions of the Engineer-in-Charge.
200
-
103.7
... More
Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and patter n over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direct ions of the Engineer-in-Charge. [Note: Old CC paver blocks shall be supplied by the department free of cost].
100
-
357.44
... More
Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with ceme nt mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curv e, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per directions of the Engineer -in-Charge. [Notes: (1) Length of finished kerb edging shall be measured for payment. (2) Old kerb stones shall be supplied by the d epartment free of cost.]
2
-
91.46
... More
Providing and fixing 15mm diameter C.P. brass tap as per following with C.P. brass flange including cutting & making good the walls wherever required, etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specificatio ns and directions of the Engineer-in-Charge :
-
-
-
... More
Bib Cock (Ref. Make: JAQUAR, Model: Cat. No. 0021 or approved equivelent)
2
-
1611.82
... More
Bib Cock (Ref. Make: JAQUAR, Model: Cat. No. 0037 or approved equivelent)
2
-
1685.52
... More
Bib Cock (Ref. Make: JAQUAR, Model: Cat. No. 0107 or approved equivelent)
2
-
2128.89
... More
Bib Cock (Ref. Make: JAQUAR, Model: Cat. No. 0041 or approved equivelent)
2
-
2043.31
... More
Bib Cock (Ref. Make: JAQUAR, Model: Cat. No. 0309 or approved equivelent)
2
-
4402.78
... More
Bib Cock (Ref. Make: JAQUAR, Model: Cat. No. 7037 or approved equivelent)
2
-
4797.42
... More
Cleaning of terrace/ loft water storage tank (inside surface area) up to 2000 litre capacity at all heights with coconut brushes, du ster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and d isposing of malba, all complete as per the directions of Engineer-in-Charge. [Note: The old date already written on tank should be r emoved with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be ma de @ Rs. 0.10 per litre if during cleaning any G.I. fittings or ball cock is damaged that is to be repaired by the Contractor at his own cost and nothing extra will be paid on this account].
9000
-
0.38
... More
Disconnecting damaged overhead/ terrace PVC water storage tank of any size from water supply line and removing from the terrace in cluding shifting at ground level as per the directions of Engineer-in-Charge.
2
-
350.33
... More
Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per th e directions of Engineer-in-Charge.
20
-
85.61
... More
RAINWATER HARVESTING & TUBEWELLS:
-
-
-
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per directions of the Engineer-in-Charge.
5
-
1462.57
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulde rs, in required thickness, for all leads & lifts, all complete as per directions of the Engineer-in-Charge.
5
-
1462.57
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per directions of the Engineer-in-Charge.
5
-
1462.57
... More
Gravel packing in tubewell construction in accordance with IS:4097, including providing gravel fine/ medium/ coarse, in required gra ding & sizes as per actual requirement, all complete as per directions of the Engineer-in-Charge.
2
-
1651.26
... More
Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos. cross sectional T.M.T. hoop bars, including providing 50 mm dia p erforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direct ions of the Engineer-in-Charge.
10
-
1335.01
... More
HORTICULTURE & LANDSCAPING :
-
-
-
... More
Supplying and stacking of good earth at site including royalty and carriage up to any lead complete. [Note: Volume of earth measured in stacks will be reduced by 20% for payment].
200
-
605.72
... More
Supplying and stacking of well decayed cattle manure at site including royalty and carriage up to any lead complete. [Note: Volume o f cattle manure measured in stacks will reduced by 8% for payment].
200
-
297.31
... More
Providing and laying Neelgiri/ Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level an d ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning w ith sprinkler and maintenance for 30 days or more till the grass establish properly, complete as per direction of the Engineer-in-Ch arge.
1000
-
272.54
... More
Supply and planting sapling (not less than 45 cm in height and 60 cm centre to centre) of Casurina, Labrum, Gulmohar, Ashokas, Bottl e Palm, Bougenvilla, Hibiscus, Roses or other approved type of variety of plants, watering & maintenance for 30 days minimum complet e in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engine er-in-Charge.
800
-
568.19
... More
Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos (3 Nos horizontal & 4 Nos vertical “U“ shape) M.S. wires of 3.5 m m dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of the Engineer-in-Charge.
-
-
-
... More
Top inside diameter 35 cm, outer bottom diameter 25 cm, total height 35 cm with wall thickness of 25.4 mm
200
-
278.02
... More
Top inside diameter 30 cm, outer bottom diameter 20 cm, total height 30 cm with wall thickness of 25.4 mm
200
-
202.49
... More
Providing watering through water tanker having 5000 litre capacity with one labour for watering including cost of water, filling of tanker, watering at site with all leads and lifts as per direction of the Engineer-in-Charge. [Note: Unit "EA" shall mean "PER TRIP" ].
20
-
1040.37
... More
Supply and spreading of approved fine river sand as per the direction of Engineer-in-charge.
20
-
1391.21
... More
Cleaning of manholes and removal of chokage in sanitary sewer or CRWS manholes and its allied connection by rodding, steaming, water ing manually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Charge including plugging and dewatering of manholes removal of muck, sludge, floating materials etc. and disposing, the same to dumping pit within owner's premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, hoses, oper ative labour etc. complete.Manholes of depth upto 2.0 M
20
-
717.84
... More
Cleaning of manholes and removal of chokage in OWS manholes and its allied connection by rodding, steaming, watering manually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Charge including plugging and dewat ering of manholes, removal of muck, sludge, floating materials etc. and disposing, the same to dumping pit within owner's premises a s directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, hoses, operative labour etc. complete.Manholes of depth upto 2.0 M
50
-
1101.76
... More
Supply of tractor with trailer on hire charges for 08 hours per day including rendering the services of 4 labourers driver, fuel an d other consumables, tools, tackles etc. for transportation of rubbish/ waste materials complete as per directions of Engineer-in-Charge.(8 hours working period of one tractor i s considered as one tractor day). Unit "EACH" (EA) stands for tractor days.
10
-
4763.34
... More
Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. Pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. Complete. 450 mm dia. R.C.C. pipe
20
-
2438.29
... More
Rodent Control
-
-
-
... More
Supply and Application of pesticides for Rodent Control as per Scope of Work mentioned in SCC.
20000
-
1.02
... More
Supply, Mixing and Application of chemical for Lizard, Sanke Control Treatment/Cockroach/Fly and Mosquito/Spider web control and rem oval as per Scope of Work mentioned in SCC.
20000
-
0.82
... More
Consumable items
-
-
-
... More
Lizol Disinfectant Floor Cleaner Floral,
24
-
538.98
... More
Harpic Powerplus Toilet Cleaner Original
24
-
386.44
... More
Odonil Room Spray Air Freshener - 240ml
120
-
120.83
... More
Dettol Liquid Handwash Refill - Original Germ Protection Hand Wash, 1500 ml
48
-
129.66
... More
Vim Dishwash Bar, 300 g
120
-
20.34
... More
Premier Face Tissues Box, 200 Pulls
48
-
122.46
... More
Ezee Garbage Bag (Large)- 30 Pieces
192
-
61.02
... More
NEO PRODUCTS Sanicubes, 100 gm
144
-
56.09
... More
Urinal Screen Mat Set of 10 Pieces
4
-
296.61
... More
Harpic Flushmatic Twin In-Cistern Toilet-50g
192
-
62.71
... More
Godrej Aer Pocket Bathroom Fragrance - 10 g
192
-
41.53
... More
Colin Glass and Surface Cleaner Spray with Shine Boosters - 500 ml
120
-
100
... More
Duster Cloth - Pack of 6
12
-
189.83
... More
Gala 2-in-1 Double Hockey Toilet Brush
24
-
145.76
... More
Gala King Kong Grass Floor Broom XL – Megha
40
-
211.44
... More
Spotzero by Milton Elite Spin Mop with Bigger Wheels and Plastic Auto Fold Handle for 360 Degree Cleaning (Aqua Green, Two Refills)
6
-
846.61
... More
Spotzero by Milton Replacement Mop Head (Refill), Pack of 3
18
-
244.92
... More
VIMAL Plastic Ecowipe 250 Mini Bathroom
4
-
211.23
... More
Surf Excel Easy Wash Detergent Powder-4 Kg
12
-
570.34
... More
M Fold Tissue Paper -1040 Piece (8 PKT) with Check Duster Cloth Free
12
-
304.24
... More
Toilet Paper Tissue Roll Family Pack 6-in-1 (230 Sheets Per roll)
12
-
174.15
... More
Manpower Assistance
-
-
-
... More
Cleaning the tiles, lavatory, flooring, urinals of the, Control Building,HT/LT building,equipment building Sample Room & workshop b uilding by using the following materials with required proportion.This includes the shifting of leftover packing materials ,disposal of all swept materials as per instructions of EIC. Including cost of supply of consumables such as broom / Phool Jhhadu, Y-fer, ch emicals, phenyle, acid, naptha balls, liquid soap, soap powder & cake, mosquito spray, odonil, room freshener (as per requirement) ) ** ( 4 Unskilled Manpower always present at site for the above mentioned works) ( 1 Ea = 4 Unskilled Manpower for 26 days)
24
-
76845.7
... More
Insurance Scheme (PMJBY @ Rs. 20.00 & PMSBY @ Rs. 436.00) For 4 unskilled labour
2
-
1824
... More
Deployment of UnSkilled Manpower as and when required (Considered 60 days/yr) (1 Ea = 5 Unskilled Mandays)
24
-
3694.51
... More
Deployment of Semi Skilled Manpower During Schedule/ Breakdown Maintenance of Equipments in PumpStation for various mechanical and HSE works 1no. ( 1Ea = 1 Semi Skilled Manpower for 26 days)
24
-
21416.25
... More
Service charge for Manpower assistance (This item will execute when item no 10, item no 20 item no 30 and item no 40 for one Qty Eac h gives 1 Qty of this item)
24
-
15293.47
... More
PPE for Manpower
-
-
-
... More
All the workers engaged by the contractor should be provided with PPE (helmet, 1 set of safety shoes & socks rain coat- & gumboot- 1 set, 2 sets of blue colour dress) per year to be given within 1 month from the start of the work.
20
-
3508.47
... More
F&S Maintenance
-
-
-
... More
Maintenance and Inspection of DCP and CO2 fire extinguishers which includes checking the weight of cylinder, condition of threads of cap, discharge tube, sharpness of piercing pin and cylinder body,Refilling of DCP(owner supplied powder) if required and submission of reports.
-
-
-
... More
9 kg DCP extinguisher
88
-
79.75
... More
75 kg DCP extinguisher
4
-
73.64
... More
2 KG Clean Agent extinguisher
120
-
65.39
... More
2 kg CO2 extinguisher
20
-
72.75
... More
4.5 kg CO2 extinguisher
200
-
70.3
... More
6.5 kg CO2 extinguisher
6
-
70.3
... More
Supply of CO2 & Refilling of CO2 gas in cartidges for using in 10kg DCP extinguishers including all & labour, transportation etc.. c omplete as per specification and direction of EIC/Site-Engineer.( CO2 CARTRIDGE OF 200 gms)
92
-
66.42
... More
Hydrostatic testing of fire hoses at 9 Kg/ sq cm
100
-
46.24
... More
Supply of spares of fire fighting equipments
-
-
-
... More
Discharge hose with squeeze grip nozzle, hose should not burst or show leakage before 50Kgf/cm2
20
-
187.61
... More
Safety clip ( metal) with nylon thread
20
-
11.82
... More
DCP extinguisher cap washer
20
-
12.27
... More
Discharge tube washer
20
-
2.97
... More
Discharge hose (6.5mtr length) with shut off nozzle , hose should not burst or showleakage before 50Kgf/cm2
2
-
1230.21
... More
HDPE discharge horn for 4.5 Kg capacity CO2 extinguisher with fittings
20
-
159.28
... More
HDPE discharge horn for 6.8 Kg capacity CO2 extinguisher with fittings
2
-
182.07
... More
High pressure discharge hose for 4.5 Kg CO2 extinguisher with fittings
20
-
309.09
... More
High pressure discharge hose for 6.8 Kg CO2 extinguisher with fittings
2
-
340.99
... More
CO2 valve open wheel
20
-
50.02
... More
Safety pin with nylon string for CO2 extinguisher
20
-
20.47
... More
Supply & fitting fire hydrant disc washer
20
-
36.38
... More
Fire hydrant/ fire hose coupling washer
20
-
30.46
... More
Supply & fitting of rubber beeding of the complete one hose box ( bothdoors) as per direction of EIC including removing of worn out rubber beeding,labour charges, tools & tackles etc.complete in all respect.
10
-
56.55
... More
Supply & fitting of glass of hose box wherever required complete in all respect inclusive of material, labour,consumables etc.(Consi der rate for one door glass only)
10
-
59.3
... More
Supply & fitting of glass of Manual Call Points wherever required complete in all respect inclusive of material, labour,consumables etc
6
-
16.03
... More
Supply of hammer for breaking glass of Manual Call points / Hose boxes / Emergency tool box
2
-
68.18
... More
Fixing up of clamps of extinguisher in wall including supply of clamps, screws etc and drilling, fitting extinguisher to complete th e work in all respect as per direction of EIC / site engineer
20
-
45.47
... More
Supply & fitting of clamps for hanging 2Kg & 4.5Kg Co2 extinguisher on & wall including labour charges, tools tackles &consumables complete in all respect as per direction of EIC.
20
-
92.3
... More
Supply & fitting of new wind sock( 0.9m dia & 1.8mtr length) made out of synthetic cloth & stand in flood light tower , buildings, a s per direction of site engineer/ EIC
6
-
871.69
... More
Checking of heat(6 Nos) and smoke detectors (35 Nos) installed in Control building, MCC rooms, cable trenches (using heat gun and Ae rosol supplied by Owner) in each quarter inclusive of labours tools tackles
4
-
2605.1
... More
Service Assistance in servicing, Load test & certification (certification should be obtained from an authorized & competent person r ecognized by Government of Tamilnadu) as per direction of EIC, inclusive of transportation,handling charges complete in all respect.
-
-
-
... More
Supply of Barricading tapes
20
-
583.01
... More
Supply of wind indicating socks made out of polyester cloth. 1800 mm lond & 600 mm diameter and replacing the same in existing fitti ng. Colour Red 7 White band/ Red and yellow band
6
-
1001.72
... More
Supply of Dry chemical powder (DCP) as per IS: 4308 with ISI mark, suitable for DCP extinguishers
20
-
38.69
... More
Mechanical Maintenance Work
-
-
-
... More
Supply and Erection of Structural Steel: Supplying at site, steel structural items such as steel plates, bars, chequered plates, angles, beams channels, commercial quality h eavy pipes, C.I. Rollers, bolts & nuts, washers, grouting bolts, padding plates etc., fabrication and erection of saddle supports an d other type of supports for pipes manifolds and valves, fabrication and erection of platforms walkways, stairways etc., sand blast/ power brush cleaning, priming and painting the finished structures including supply of all other inputs such as labour, materials, consumable etc. necessary to perform and complete the work in all respect, in accordance with drawings, specifications and instructi ons of the Site Engineer / EIC.
1
-
120267.74
... More
Supply and Erection of Electroforged Grating Supplying at site, steel structural items such as steel plates, bars, fabrication of gratings by electroforged method, after comple te fabrication entire gratings shall be Hot Dip galvanized, gratings shall be normany of size 810mm X 250mm for steps and 1200mm X 1 000 mm or 810mm X 1000 mm for platforms / walkways, or any size as advised by EIC. Placing gratings in a replaceable mannerbolting w ith base frame of ISA by suitable GI clamps and GI fasteners, including supply of all other inputs such as labour, materials, consum able etc. necessary to perform and complete the work in all respect, in accordance with drawings, specifications and instructions of the Site Engineer / EIC.
1
-
203610.13
... More
Supply and application One coat of high build, self priming, rust encapsulating polyamidoamine cured epoxy mastic coating aluminium version (min 80 % solid by volume) to a dry film thickness of 100 microns including surface preparation by hand/wire brush/power too l
40
-
575.09
... More
Supply and application one coat of Epoxy MIO (min 80% solid by volume) with minimum 100 microns DFT surface preparation by hand/wir e brush & cloth
40
-
415.22
... More
Supply and application of 100 microns DFT of Isocyanite Aliphatic PU in two coats (50 microns each) preferably with airless spray gu n surface preparation by hand/wire brush & cloth
40
-
527.21
... More
PU /liquid epoxy Coating of under ground piping: Polyurethane Coating(PU)/ Liquid Epoxy Coating _E1 @ 2 coats or more to acheive 100 0 µm
40
-
2394.34
... More
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 14" SWMG ANSI 150#_A.6
10
-
641.59
... More
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 12" SWMG ANSI 150#_A.7
10
-
582.89
... More
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 10" SWMG ANSI 150#_A.8
10
-
474.57
... More
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 8" SWMG ANSI 150# _A.9
10
-
369.79
... More
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 6" SWMG ANSI 150#_A.10
10
-
282.78
... More
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 4" SWMG ANSI 150#_A.11
20
-
230.5
... More
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 3" SWMG ANSI 150#_A.12
20
-
184.37
... More
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 2" SWMG ANSI 150#_A.13
60
-
112.62
... More
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 1" SWMG ANSI 150#_A.15
100
-
69.36
... More
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 16" SWMG ANSI 600#_A.27
10
-
1339.15
... More
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 14" SWMG ANSI 600#_A.28
10
-
1452.36
... More
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 12" SWMG ANSI 600# _A.29
10
-
1334.01
... More
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 8" SWMG ANSI 600# _A.31
10
-
1032.55
... More
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 3" SWMG ANSI 600# _A.34
10
-
419
... More
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 2" SWMG ANSI 600# _A.35
20
-
241.68
... More
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 1" SWMG ANSI 600# _A.37
40
-
132.68
... More
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 14" SWMG ANSI 900#_A.42
10
-
2189.49
... More
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 12" SWMG ANSI 900#_A.43
10
-
1630.06
... More
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 8" SWMG ANSI 900#_A.45
10
-
1106.18
... More
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 3" SWMG ANSI 900#_A.48
10
-
396.55
... More
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 2" SWMG ANSI 900#_A.49
20
-
266.8
... More
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document: 1" SWMG ANSI 900#_A.50
40
-
122.36
... More
Strengthening of joints by depositing additional weld beads (one run with 4 mm AWS 7018) wherever required to restore the joints to the desired size of 5 mm / 6mm including supply of all labour, equipment, consumables, labour etc required to complete the job in al l respects as per the instruction of Site Engineer/ EIC.
100
-
571.47
... More
Strengthening of joints by depositing additional weld beads (one run with 4 mm AWS 6013) wherever required to restore the joints to the desired size of 5 mm / 6mm including supply of all labour, equipment, consumables, labour etc required to complete the job in al l respects as per the instruction of Site Engineer/ EIC.
100
-
571.47
... More
Supplying and operating of JCB for excavation, grading, clearing of grass, uprooting of tress, etc
192
-
1313.42
... More
Providing Hydra 12 Ton Capacity for works as directed by EIC/Site Engg
144
-
1208.46
... More
Reconditioning of Basket Strainer by providing double layer mesh as per the instruction of EIC/Site
8
-
9756.86
... More
Supply of M-Oil
400
-
157.91
... More
Supply of Belzona 1161
10
-
18175.31
... More
Supply and fixing of stickers of various sizes. Measurement shall be total length and height of the sticker.
100
-
222.84
... More
Electrical Maintenance
-
-
-
... More
Suitable for 33 KV voltage level
4
-
1272.97
... More
Power cables LT : OD upto 20 mm
500
-
37.56
... More
Power cables LT : OD above 20 mm and upto 40 mm
100
-
54.59
... More
Power cables LT : OD above 40 mm and upto 60 mm
100
-
88.36
... More
Power cables LT : OD above 60 mm
100
-
74.83
... More
Power cables HT
100
-
132.12
... More
Laying of HDPE Pipe in trenches/ walls/ concrete structure/ panels etc. as per specifications & drawings & blowing/ laying of Owner supplied Optical Fibre Cable in HDPE pipe, carrying out end to end testing of laid Optical fibre cables by taking OTDR traces and su bmitting the OTDR trace printouts to Site Engineer/ Engineer-in-charge. The job includes the supply and installation of required mat erials such as fixing clamps, screws, tags etc. as required to complete the job in all respects as per drawings and directions of Si te Engineer/ Engineer-in-charge including cost of all labour, tools & tackles, test instruments, materials etc. The job includes han ding over the tested cables to the Telecom / Control System Works Contractor in commissioning of Local Area Network.
100
-
178.39
... More
a) 2/3/4/5/6C upto 95 sqmm
20
-
337.13
... More
b) 2/3/4/C from 120 upto 400 sqmm
20
-
660.8
... More
Centrifuging,filtering and dehydrating of the transformer oil of transformer to improve insulation level to the value recommended as per the relevant ISS and the manufacturer's recommendations and as per specifications,and directions of the Site Engineer/Enginee r-in-Charge including supply of labour, tools and materials and all services rendered complete.
4
-
29942.94
... More
Supply, erection & installation of MS cable markers, including excavation, installation of the markers, cement concrete grouting, ba ckfilling, materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge
10
-
2581.96
... More
Power cables LT : OD upto 20 mm
2
-
5092.45
... More
Power cables LT : OD above 20 mm and upto 40 mm
2
-
6322.88
... More
Power cables LT : OD above 40 mm and upto 60 mm
4
-
9108.41
... More
Power cables LT : OD above 60 mm
4
-
13237.97
... More
Supply, installation, testing and commissioning of ACE (Artificial concept of earthing with chemical rod) Chemrod earthing electrode by digging earthing Item includes the supply and installation of the CI/RCC cover in the earth pit, backfilling etc. and constructi on of chamber; complete including excavation, backfilling and supply of all materials required for making earth pit as per drawings, specifications and directions of the Site Engineer, Including the cost of all labour, tools, materials etc. complete in all respect s.
2
-
15980.73
... More
Supply, installing and testing of earthing strip/wire/rope/cable for completely making the earthing grid system by supplying, layin g the GI / Cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing g rid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer-in-charge, including the cost of al l labour, tools, materials, etc. complete in all respect:
-
-
-
... More
50 mm X 6 mm G.I. earthing strip
50
-
317.21
... More
40 mm X 5 mm G.I. earthing strip
60
-
221.19
... More
GI wire (8 SWG)
80
-
68.42
... More
GI wire / rope 35 sq. mm
60
-
136.91
... More
GI wire / rope 10 mm diameter
60
-
166.61
... More
Supply, erection & installation of cable conduits made up of GI pipes of medium class 'B' subject to owner's approval in trenches (a lready made), on walls, concrete structure etc., including supply and installation of all the necessary pipe fittings such as bends, sockets, elbows, tees etc., bending, threading, binding, clamping, providings, spacers, plugs, packings, bushings etc., as required Job complete in all respects including the cost of all labour, tools, material etc. and as per specifications and directions of s ite engineer / Engineer-in-Charge. :25 mm
60
-
501.18
... More
1 light point controlled by 1 switch.
2
-
1446.93
... More
2 light points controlled by 1 switch
2
-
1743.32
... More
3 light points controlled by 1 switch
2
-
2222.53
... More
4 light points controlled by 1 switch
2
-
2655.51
... More
Wiring with PVC insulated 2.5 sqmm copper conductor wire for fan points (1 fan point controlled by 1 modular switch) including provi ding space for electronic regulator in switch box , providing and fixing fan hook in the ceiling as per specifications and drawings.
2
-
2265
... More
Wiring with PVC insulated 2.5 sqmm copper conductor wire for phase & neutral , 650 V grade including earthing , the third pin with 1.5 sqmm copper conductor earthing insulated continuity wire for exhaust/ wall bracket fan including providing and fixing of 5 pin 6 A modular socket and 10 A modular switch near the door or as as per specifications and drawings. The circuit wiring shall be with 4 sq. mm PVC copper wire from switchboard to 1st exhaust fan for multiple exhaust fans in one circuit.
2
-
2330.28
... More
Wiring for 250 V single phase and neutral 16 amps modular power plug point with PVC insulated 4 sq. mm. copper conductor wires for phase & neutral, 650 V grade including earthing, the third pin with 2.5 sq. mm copper conductor earthing insulated continuity wire, complete with providing and fixing of 6 pin 16/6A modular socket and 20/10 A modular switch (1 plug point per circuit) as per specif ications and drawings
2
-
3537.81
... More
Wiring as in item no. 1 for 250 V single phase and neutral 6 amps modular plug point with PVC insulated 2.5 sq. mm. copper conducto r wires for phase & neutral, 650 V grade including earthing, the third pin with 1.5 sq. mm copper conductor earthing insulated conti nuity wire, complete with providing and fixing of 5 pin 6A modular socket and 10 A modular switch (1 plug point per circuit) as per specifications and drawings. The circuit wiring shall be with 4 sq. mm PVC copper wire from switchboard to 1st plug point for multip le exhaust fans in one circuit.
2
-
2574.12
... More
Point wiring for power plug point with 4 sq.mm stranded PVC insulated copper wire including earthing the third pin with 2.5 sq. mm copper insulated earthing wire complete with supply and fixing of recessed mounted industrial type 3 pin 32 A metal clad socket and plug, 20A MCB (Motor duty) housed in a 16 gauge M.S. Box
2
-
3909.03
... More
Wiring as in item no. 1 for call bell points (1 call bell point controlled by 1 modular switch)in switch box including providing ca ll bell / buzzer suiable for single phase 230 V as per specifications and drawings.
2
-
1791.63
... More
Wiring as in item no. 1 for 250 V single phase and neutral 6 amps modular plug point with PVC insulated 2.5 sq. mm. copper conducto r wires for phase & neutral, 650 V grade including earthing, the third pin with 1.5 sq. mm copper conductor earthing insulated conti nuity wire, complete with providing and fixing of 3 numbers, 6 A 5 pin modular sockets and 10 A modular switches for UPS point as pe r specifications and drawings
2
-
2524.4
... More
Surface mounting Plug & Socket DB complete with 63 A TP MCB, with neutral link for VFD AC's
2
-
4483.55
... More
Pressure Testing & Charging of R-22 Refrigerant Gas
40
-
2475.07
... More
Preparation & installation of corrosion coupon from owner supplied coated pipe. which involves preparation of sample of size 2"x4", application of pipeline coating material on the coupon, soldering 6 sq. mm. cable with coupon, sealing the soldered joint with epoxy , positioning the coupon at the pipe line depth and with in a distance of 0.5 M from the pipeline inclusive of cable & terminating t he cable in the TLP terminal. The corrosion coupons are to be installed with specified Test lead points for which prior approval to be obtained from Owner. The item also includes supply, installation / laying & termination of all XLPE, Cu cables of required length (as per site conditions) and size as mentioned in the standard drawings, toggle switch, cable glands and lugs etc., complete in all respect. All as per the direction and specification detailed in the document complete with tools, tackles & other necessary require ment for preparation of the coupon. The work complete in all respect shall include supply of all labour, tools etc complete as per t he directions of the Site Engineer and as per drawing no. 9200-99900-404-601-01 & 9200-99900-404-607-01.
4
-
2176.37
... More
Supply of 2000mm x1000 mm, 3 mm thick(Class B)Elastomer mats conforming to IS: 15652:2006
10
-
3499.48
... More
Supply and fixing of surface mounted LED ceiling light fitting type Mainstream spot Aura 15W/18W/20W/22W of PHILLIPS or equivalent a pproved make complete with all accessories such as LED module, driver, optics, thermal sink, connector blocks etc including installa tion.
10
-
3305.72
... More
Industrial LED Flood Light/High Mast Fixture, Rating: 350W
10
-
13062.5
... More
Supply of LED Panel recessed light 2 feet x2 feet with all fitting/fixtures as per technical specification- nominal 36W ( given by EIC)
10
-
2750
... More
Motors Upto and including 5 kW
10
-
2937.5
... More
Motors Above 10 kW and upto and including 20 kW
2
-
7193.75
... More
Motors Above 20 kW and upto and including 50 kW
2
-
17810
... More
Motors Upto and including 5 kW
70
-
478.75
... More
Motors Above 10 kW and upto and including 20 kW
2
-
1963.75
... More
Motors Above 20 kW and upto and including 50 kW
4
-
4708.75
... More
Supplying, providing and fixing TP&N Switch Disconnector Fuse Units of following capacities inside existing panels / boards / cubicl es with ISI marked HRC fuses complete including drilling holes, making connections, removing the existing items, etc.: Upto and incl uding 63 Amps
8
-
2325
... More
Supplying, providing and fixing MCCBs of following capacities, short circuit breaking capacities (SCBC) and poles inside existing pa nels /boards / cubicles complete including drilling holes, making connections, removing the existing items, etc. :4P MCCB, SCBC upto 36 kA, Upto and including 200 Amps
2
-
9962.5
... More
Supply, fixing, termination, testing & commissioning of ISI mark HRC fuse links of following Ratings and all sizes and SCBC up to 10 0 kA,including making connections, removing the existing items, etc. :HRC Fuse up to and including 16 Amps
40
-
50
... More
Supply, fixing, termination, testing & commissioning of ISI mark HRC fuse links of following Ratings and all sizes and SCBC up to 10 0 kA,including making connections, removing the existing items, etc.: HRC Fuse above 16 Amps and upto and including 80 Amps
40
-
138.75
... More
Supply, fixing, termination, testing & commissioning of ISI mark HRC fuse links of following Ratings and all sizes and SCBC up to 10 0 kA,including making connections, removing the existing items, etc.:HRC Fuse above 80 Amps and upto and including 160 Amps
10
-
456.25
... More
Supply, fixing, termination, testing & commissioning of ISI mark HRC fuse base and carrier of following Ratings and all sizes, inclu ding making connections, removing the existing items, etc.:HRC Fuse Base and Carrier up to and including 16 Amps
40
-
161.25
... More
Supply, fixing, termination, testing & commissioning of ISI mark HRC fuse base and carrier of following Ratings and all sizes, inclu ding making connections, removing the existing items, etc.:HRC Fuse Base and Carrier above 16 Amps and upto and including 80 Amps
40
-
218.75
... More
Supply, fixing, termination, testing & commissioning of ISI mark HRC fuse base and carrier of following Ratings and all sizes, inclu ding making connections, removing the existing items, etc.:HRC Fuse Base and Carrier above 80 Amps and upto and including 160 Amps
10
-
772.5
... More
Red / Green / White / Amber Color Indicating Lamps
20
-
373.75
... More
Yellow Color Indicating Lamps
20
-
510
... More
Blue Color Indicating Lamps
20
-
655
... More
Calliberation of Measuring equipments from NABL accrediated lab & submission of reports.Note: UoM is EA which is equal to calliberat ion of each equipment.
10
-
1544.68
... More
Transformer oil testing report preparation as per IS 335&1866:2000. Note: UoM is EA which is equal to one oil sample.
4
-
3592.97
... More
Polyurethane Expansion PU Foam Spray 750 ml
20
-
549
... More
Aluminium Trolley Ladder
2
-
7999
... More
Inditrust 16 Ton Hydraulic Crimping Tool 11 dies 16-300 mm2 for Copper, Aluminum Terminal Pliers
2
-
3200
... More
Digital Multimeter
2
-
19788
... More
101A Light Meter Luxmeter (Measures Up-To 200000 LUX), Accuracy: +5 percent of reading, Receiving Light: Silicon of photo electricit y diode
2
-
1549
... More
Non-Contact Voltage Tester 12-1000V AC Voltage Detector Pen Circuit Tester Tool with Led Flashlight Beeper Pocket Clip, Live wire te st/non-wire test
2
-
539
... More
Digital Craft Size 1/4" (6.35MM) Steel Die Metal Stamping kit Punch Tool Number Letter Alphabet Stamps Tools DIY Jewelry Gold Silver Metal Leather Logo Stamp with Safety Hand Gloves & 200grm Hammer
2
-
1321
... More
Rectangular Aluminium Strip, For Industrial (25mm width, 2 mm thick)
10
-
210
... More
T&I Maintenance
-
-
-
... More
PI Supply of Pressure Indicators (PI) of the range 0 to 10 Kg / Cm2 as per the technical specification
2
-
3656.81
... More
SUPPLY-PI Supply of Pressure Indicators (PI) of the range 0 to 20 Kg / Cm2 as per the technical specification
2
-
4480.42
... More
PI Supply of Pressure Indicators (PI) of the range 0 to 40 Kg / Cm2 as per the technical specification
2
-
5301.69
... More
PI Supply of Pressure Indicators (PI) of the range 0 to 100 Kg / Cm2 as per the technical specification
2
-
4626.51
... More
PI Supply of Pressure Indicators (PI) of the range 0 to 200 Kg / Cm2 as per the technical specification
2
-
5761.96
... More
Electrical and T&I Manpower
-
-
-
... More
Insurance Scheme (PMJBY @ Rs. 20.00 & PMSBY @ Rs. 436.00) For 2 semiskilled labour
2
-
912
... More
Deployment of Semi Skilled Manpower During Schedule/ Breakdown Maintenance of Equipments in PumpStation for various mechanical and HSE works 2no. ( 1Ea = 1 Semi Skilled Manpower for 26 days)
48
-
21416.25
... More
Service charge for Manpower assistance (This item will execute when item no 10 and item no 20 for one Qty Each gives 1 Qty of this item)
48
-
3212.44
... More
Electrical and T&I PPE
-
-
-
... More
All the workers engaged by the contractor should be provided with PPE (helmet, 1 set of safety shoes & socks rain coat- & gumboot- 1 set, 2 sets of blue colour dress) per year to be given within 1 month from the start of the work.
4
-
3935.17
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements