Back
  1. Home/
  2. Indian Tenders/
  3. Andhra Pradesh Tenders/
  4. Indian Institute Of Information Technology/
  5. Overview

Indian Institute Of Information Technology Tender

To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.

Indian Institute Of Information Technology - IIIT Tender

Works
Building Construction
Eprocure
Chittoor, Andhra Pradesh
Opening Date25 Jan 2025
Closing Date10 Feb 2025
Tender Amount₹ 80,00,00,000 
Notes
Download

Costs

Summary

Construction Of Academic And Hostel Building

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Request Call Back

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
During the excavation if required Contractor has to arrange & shoring with suitable method. Contractors should give their proposal for method of shoring & get approved from the Engineer-in-charge/ Architect before commencement of excavation at site. No extra amount shall be claimed by the contractor on this account and his quoted rates shall be deemed to include shoring if required. The Contractor to make his assessment for the same.

-

-

-

... More
During the excavation if required Contractor has to arrange & run Dewatering Bore to maintain site water table below 1 mtr from deepest foundation level including casing, perforated pipes, soil filter, Submersible pumps, connecting wire, including all tools and tackles, connecting the discharge pipe to nearest drain from site premises. Contractor must ensure all safety and ensure backup pumps in case of any breakdown. The complete system is to be installed as per engineer's satisfaction. Cost is inclusive of Providing and running Diesel Generator (1 Running/ 1 Standby) with required fuel. Contractor has to arrange & maintain temporary drainage system till completion of Foundation casting & curing period of foundation. disposal of extracted water in accordance with environmental regulations; and restoration of the site post-dewatering. All work should comply with relevant safety standards and local regulations, ensuring minimal disruption to the surrounding environment and structures.No extra amount shall be claimed by the contractor on this account and his quoted rates shall be deemed to include dewatering if required. The Contractor to make his assessment for the same.

-

-

-

... More
All kinds of soil

25969

-

-

... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming & watering, lead up to 500 m and lift upto 1.5 m.

1752

-

-

... More
Extra for Excavating every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.

-

-

-

... More
All kind of soil

-

-

-

... More
1.5m to 3.0m Excavation

17768

-

-

... More
3.0m to 4.5m Excavation

1367

-

-

... More
4.5m to 6.0m Excavation

1

-

-

... More
Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 10km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift.

7108

-

-

... More
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Contractor shall be provided a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. Plan area at ground floor level will be measured for payment.

5281

-

-

... More
Supplying and filling in plinth with Locally available sand under floors, including watering, ramming, consolidating and dressing complete. The sand shall be clean, well-graded, and free from impurities. A sample of the sand must be submitted and approved by the Engineer-in-Charge before use. The filling shall be done in layers not exceeding 200mm in thickness. Each layer shall be thoroughly watered, rammed, and consolidated to achieve the desired compaction. The surface shall be dressed to the required level and slope as specified. All work shall be carried out in accordance with relevant standards and best practices, ensuring a stable and well-compacted base for the flooring.

820

-

-

... More
Supplying and filling in plinth with M-Sand under floors, including watering, ramming, consolidating and dressing complete. The work includes supplying and filling in plinth with M-Sand (Manufactured Sand) under floors. The M-Sand shall be clean, well-graded, and free from impurities. The filling shall be done in layers not exceeding 200mm in thickness. Each layer shall be thoroughly watered, rammed, and consolidated to achieve the desired compaction. The surface shall be dressed to the required level and slope as specified. All work shall be carried out in accordance with relevant standards and best practices, ensuring a stable and well-compacted base for the flooring.

50

-

-

... More
Disposal of moorum/ building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading & disposed outside the campus or in the disposal location as per the direction of Engineer-in-charge. complete as per directions of Engineer-in-charge.

24217

-

-

... More
Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material outside of the campus.

-

-

-

... More
Beyond 30 cm girth upto and including 60 cm girth

5

-

-

... More
Beyond 60 cm girth upto and including 120 cm girth

7

-

-

... More
SUB HEAD 2.0 : CONCRETE WORK

-

-

-

... More
Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering. All work upto plinth level.

-

-

-

... More
1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

5

-

-

... More
Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/ Ordinary Portland/ Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate I retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.

-

-

-

... More
Concrete of M10grade with minimum cement content of 220 kg /cum

1046

-

-

... More
Concrete of M15 grade with minimum cement content of 240 kg /cum

434

-

-

... More
Concrete of M20 grade with minimum cement content of 270 kg /cum

5

-

-

... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

228

-

-

... More
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement :2 coarse sand (zone-Ill) derived from natural sources :4 graded stone aggregate 12.5 mm nominal size derived from natural sources)

10

-

-

... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square meter on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

10

-

-

... More
SUB HEAD 3.0 : REINFORCED CEMENT CONCRETE WORK

-

-

-

... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana I Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate I retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.:

-

-

-

... More
Note: In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.

-

-

-

... More
All works upto plinth level

-

-

-

... More
Concrete of M30 grade with minimum cement content of 350 kg /cum

3865

-

-

... More
All works above plinth level for all heights & levels

-

-

-

... More
Concrete of M30 grade with minimum cement content of 350 kg /cum

3828

-

-

... More
Providing and fixing high yield strength deformed TMT bars of various diameters of grade Fe550D conforming to BIS Specification including cutting, bending, fabricating and placing in position according to drawings and binding the reinforcement with the use of 18 gauge galvanised annealed binding wire of double fold (double strands) and providing approved precast cement cover blocks of adequate sizes for main reinforcements to ensure specified cover according to relevant IS code. The rate to include material, machinery, equipment, labour, cutting, bending, placing, binding, staging, scaffolding, all lead and lift, wastages, necessary chairs, spacers as per IS as specified complete in all floors / all height.

1199572

-

-

... More
Note: Unless noted otherwise the measurements will be in accordance with IS: 1200 or equivalent BS. However reinforcement shall be measured only in lengths of bars as actually placed in position on standard weight basis, no allowance being made in the weight for rolling margin. Authorized laps and splices only will be measured. Chairs of any shape & profile, spacer bar of any shape & profile, concrete cover blocks, wastages, binding wire etc., will not be measured and shall be included in the quoted rates. Quoted rate shall be deemed to have considered the above stipulation.

-

-

-

... More
Centering and shuttering including strutting propping etc., and removal of form for:

-

-

-

... More
Raft Foundations, footings, bases of columns etc., for mass concrete

220

-

-

... More
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

5373

-

-

... More
Suspended floors, roofs, landings, balconies, and access platforms

10077

-

-

... More
Shelves (Cast in situ)

25

-

-

... More
Lintels, beams, plinth beams, girders, bressummers and cantilevers

14865

-

-

... More
Columns, Pillars, Piers, Abutments, Posts and Struts

3818

-

-

... More
Stairs, (excluding landings) except spiral-staircases

807

-

-

... More
Extra for providing and fixing of customized formwork for Waffle slab shuttering (over general shuttering beams & slab) using FRP Waffles of size as per design, including all necessary supports, alignment, and sealing to prevent leakage of concrete slurry. The work includes the supply of materials, installation, and removal after the concrete has set. Waffle should be Smooth finish to ensure easy removal and clean surface post-concreting. All materials and installation work will be subject to inspection by the project engineer. Materials must comply with relevant industry standards and specifications. Proper handling procedures to be followed to avoid damage to the FRP Waffles. Thorough cleaning of points and shuttering surface, greasing of pins, and oiling of shuttering surface before fixing. Waffles must be aligned accurately to ensure uniform beam thickness. Adequate support system to be provided to prevent any movement during concreting. Proper sealing to prevent leakage of concrete slurry. Contractor to provide smooth form-finished RCC surface. No plastering permitted on RCC surface. Any bulging, honeycombing, or other deficiencies are not acceptable and must be rectified at the contractor’s expense. Selection of either new or used slab moulds is at the decision of Engineer In-Charge.

-

-

-

... More
With New FRP Waffle Slab Moulds

3256

-

-

... More
With Used / rectified FRP Waffle Slab Moulds

1

-

-

... More
Providing & Fixing of Floor to Floor/ Corner Expansion Joints Aluminum Covers Profiles, having a Hard Wearing, Maintenance Free, long Lasting design. The surface of the Exp. Joint Covers should have Serrated Surface for Skid Resistance. The design of the Exp. Joint Cover System should be such that it should avoid any accumulation of dirt. The Exp. Joint Cover should have an Articulated Telescope Design so as to accommodate the movements in all 3 directions. The system should have a vertical displacement of 10mm. The system shall be symmetric in design and minimize the bump while movement. System with minimum exposed surface area will be accepted. The system should be in 6063 T66 alloy in Mill finish and the system can be used for standard Rolling loads of private cars or cart wheel loads. The side profiles will have micro serration to avoid any slipping of pedestrians. For precise transitions, the factory supplied slid-in connection pins should be used during the installation of the cover system.

-

-

-

... More
Floor Joint of 50-100 mm gap

5

-

-

... More
Supply and installation of Cover strip joints width for 25mm to 75mm in accordance with the requirements of the below specifications. The joint covers are designs utilizing extruded Aluminium base members of 100mm long along with the Snap in Tension Clip System. The material shall be such that it provides an Expansion Joints System suitable for Vertical Wall to Wall Flat & Horizontal Ceiling to Ceiling Flat application. The Joint System shall utilize lightweight Aluminium profiles exhibiting minimal exposed Aluminium surfaces of 100mm mechanically locking with a specifically designed clip made up of stainless steel to facilitate movement by manufacturer Throughout the normal movement cycle, the system shall demonstrate the ability to remain flat at all times and provide a flush transition between opposing and adjacent finish construction.

-

-

-

... More
Wall Joint of 50-100 mm gap

59

-

-

... More
Providing & Fixing of the Expansion Covers for Terrace Expansion Joints - Exp. Joints in Terrace to Terrace & Terrace to Terrace Wall. The sealing strip should be used for the application areas for the non-Pressurized water areas as per DIN 18195 Specification. The Flamline Series Sealing Strip is specifically developed compound with ensure to absorb the Three-Dimensional movement having a total width of 340 mm. The sealing strip should have the properties for sealing on the Bitumen sheets, Epoxy Adhesive on Concrete & Metal. The both the side ends should have the Protruding Fabric which should enable for the Perfect bonding /connecting with Bitumen / Epoxy. The sealing strip should have the fusion of EPDM in the elastic zone for the excellent ozone & UV resistance. The sealing strip should at the same time perform under varying thermal temperature of (- 40 to + 90 Degree). The sealing strip should have a excellent resistance to alcohols and ketones, alkalis, diluted acids and Salt Solution.

-

-

-

... More
Roof Joint of 50-100 mm gap

59

-

-

... More
SUB HEAD 4.0 : MASONARY WORK

-

-

-

... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

-

-

-

... More
Cement mortar 1:6 (1 cement :6 coarse sand)

10

-

-

... More
Providing & constructing solid concrete block masonry in cement mortar 1:4 using precast blocks of specified sizes with minimum crushing strength of 40 kg/Sq cm raking out joints, scaffolding, curing etc. including providing & fixing wall ties, staging, raking of joints, curing of block before & after etc, complete in all respect and at all heights & Levels all complete as directed at all levels.

-

-

-

... More
With Solid Concrete Block 400x200x200mm

7750

-

-

... More
With Solid Concrete Block 400x150x200mm

5

-

-

... More
With Solid Concrete Block 400x100x200mm

1059

-

-

... More
SUB HEAD 5.0 : FLOORING & WALL CLADDING WORK

-

-

-

... More
Providing & fixing 25mm thick Kota stone slab flooring in various colour shade over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 :4 (1 cement :4 coarse sand).

6300

-

-

... More
Providing & fixing Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

189

-

-

... More
Providing edge moulding to 18 mm thick Granite stone counters, Vanities, treads etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

1703

-

-

... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing ,curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

549

-

-

... More
Same as above but extra for using flamed finished granite

112

-

-

... More
Same as above but extra for using Leather finished granite

800

-

-

... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels

-

-

-

... More
Area of slab over 0.50 sqm

963

-

-

... More
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.

998

-

-

... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

96

-

-

... More
Providing and fixing 1st quality rectified glazed wall tiles conforming to IS: 15622 of approved sizes (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including PVC corner beading, pointing in white cement mixed with pigment of matching shade complete.

1665

-

-

... More
Providing and laying rectified Glazed Ceramic (glazed/ matt) floor tiles of approved size (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

583

-

-

... More
Providing and laying Vitrified tiles (Matt/ Glossy) in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

-

-

-

... More
Double charge vitrified tile polished finish of size

-

-

-

... More
Size of Tile 800x800 mm (Base price of tile Rs. 950 per Sqm. F.O.R. at site.)

3845

-

-

... More
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling I grouting and finishing complete as per direction of Engineer-in-charge.

-

-

-

... More
Size of Tile 600x600 mm

583

-

-

... More
Size of Tile 600x300 mm

1665

-

-

... More
Size of Tile 800x800 mm

3845

-

-

... More
Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8 mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

60

-

-

... More
Providing and fixing granite steps 20mm thick, each step comprising both the tread and riser. The granite shall be of premium quality, free from cracks, stains, and other defects, with a uniform color and texture. The tread shall have a width of 300 mm, while the riser shall have a height of 150 mm. The granite shall be cut to size and polished to a smooth, non-slip finish. The surface to receive the granite steps shall be cleaned and prepared to ensure proper adhesion. Cement mortar mix (1:4) shall be used to fix the granite securely in place. The joints between the treads and risers shall be filled with a matching grout to ensure a seamless appearance. All exposed edges of the granite shall be chamfered or rounded to prevent sharp edges and enhance safety. The installation shall be carried out with precision to ensure that the steps are level, aligned, and securely fixed. The finished work shall be cleaned and polished to remove any adhesive residues and to achieve a high-quality finish. All work shall be carried out in accordance with relevant IS codes and best practices, ensuring durability and aesthetic appeal.

788

-

-

... More
Providing and laying concrete grey-colored epoxy flooring system on the ramp surface, consisting of Nitoprime 25, a 3mm thick layer of Nitoflor TF30, Antislip Grain No.3, and a 0.5mm thick topcoat of Nitoflor FC150. The process begins with thorough surface preparation to ensure a clean and dry substrate. Nitoprime 25 is then applied as a primer to enhance adhesion. Once the primer has cured, a 3mm thick layer of Nitoflor TF30 is applied using a notched trowel or squeegee. While the TF30 layer is still wet, Antislip Grain No.3 is broadcast evenly to achieve the desired slip resistance. After the base layer has cured, a 0.5mm thick topcoat of Nitoflor FC150 is applied to encapsulate the Antislip Grain Finish Epoxy + PU Resin Floor Coating and provide a durable, smooth finish. The completed flooring system should be uniform, aesthetically pleasing, and meet all specified performance criteria.

123

-

-

... More
SUB HEAD 6.0 : FINISHING WORK

-

-

-

... More
Providing & applying 12 mm thick cement plaster of mix : 1:4 (1 cement: 4 coarse sand) The work involves the application of 12mm thick cement mortar plaster on all walls & other surfaces at all heights and levels with required scaffolding. The plaster shall be composed of a mix of cement and sand in the ratio of 1:4 (one part cement to four parts sand by volume). The sand used shall be clean, well-graded, and free from impurities. The surface to be plastered shall be thoroughly cleaned and wetted before the application of the plaster. The plaster shall be applied in a single coat, ensuring a uniform thickness of 12mm. It shall be finished smooth with a trowel, ensuring no cracks or uneven surfaces. All corners, edges, and junctions shall be neatly finished. Price is inclusive of use of chicken mesh/wire mesh at the RCC and masonry joints wherever required/ as directed by Engineer-in-charge. The plaster shall be cured for a minimum of 7 days to achieve the desired strength and durability. All work shall be carried out in accordance with relevant standards and best practices, ensuring a high-quality finish.

15781

-

-

... More
Providing & applying 15 mm thick cement plaster of mix : 1:4 (1 cement: 4 coarse sand) The work involves the application of 15mm thick cement mortar plaster on all walls & other surfaces at all heights and levels with required scaffolding. The plaster shall be composed of a mix of cement and sand in the ratio of 1:4 (one part cement to four parts sand by volume). The sand used shall be clean, well-graded, and free from impurities. The surface to be plastered shall be thoroughly cleaned and wetted before the application of the plaster. The plaster shall be applied in a single coat, ensuring a uniform thickness of 12mm. It shall be finished smooth with a trowel, ensuring no cracks or uneven surfaces. Price is inclusive of use of chicken mesh/wire mesh at the RCC and masonry joints wherever required/ as directed by Engineer-in-charge. All corners, edges, and junctions shall be neatly finished. The plaster shall be cured for a minimum of 7 days to achieve the desired strength and durability. All work shall be carried out in accordance with relevant standards and best practices, ensuring a high-quality finish.

19287

-

-

... More
6 mm thick cement plaster of mix : 1:3 (1 cement : 3 fine sand). The work includes providing and applying 6mm thick cement mortar plaster on ceilings and other surfaces at all heights and levels with required scaffolding. The plaster shall be composed of a mix of cement and sand in the ratio of 1:3 (one part cement to three parts sand by volume). The sand used shall be clean, well-graded, and free from impurities. The surface to be plastered shall be thoroughly cleaned and wetted before the application of the plaster. The plaster shall be applied in a single coat, ensuring a uniform thickness of 6mm. It shall be finished smooth with a trowel, ensuring no cracks or uneven surfaces. Price is inclusive of use of chicken mesh/wire mesh at the RCC and masonry joints wherever required/ as directed by Engineer-in-charge. All corners, edges, and junctions shall be neatly finished. The plaster shall be cured for a minimum of 7 days to achieve the desired strength and durability. All work shall be carried out in accordance with relevant standards and best practices, ensuring a high-quality finish.

807

-

-

... More
Providing & applying 18 mm thick cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). The work includes providing and applying 18mm thick cement plaster in two coats on external walls and other surfaces at all heights and levels with required scaffolding. The first coat, or under layer, shall be 12mm thick and composed of a mix of cement and coarse sand in the ratio of 1:5 (one part cement to five parts coarse sand by volume). Price is inclusive of use of chicken mesh/wire mesh at the RCC and masonry joints wherever required/ as directed by Engineer-in-charge. The surface to be plastered shall be thoroughly cleaned and wetted before the application of the under layer. This layer shall be applied uniformly and allowed to set sufficiently before the application of the top layer. The top layer shall be 6mm thick and composed of a mix of cement and fine sand in the ratio of 1:6 (one part cement to six parts fine sand by volume). The top layer shall be applied over the under layer, ensuring a smooth and even finish with a trowel. All corners, edges, and junctions shall be neatly finished. The entire plastered surface shall be cured for a minimum of 7 days to achieve the desired strength and durability. All work shall be carried out in accordance with relevant standards and best practices, ensuring a high-quality finish.

4945

-

-

... More
Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.

1776

-

-

... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

40819

-

-

... More
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

-

-

-

... More
Two or more coats

41412

-

-

... More
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content.

-

-

-

... More
With ready mixed red oxide zinc chromatic on steel/ iron works having VOC content less than 250 grams/ litre

50

-

-

... More
With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

40819

-

-

... More
Providing & applying Exterior grade texture paint non-pigmented stone finish with Natural mineral aggregates combined with adhesives and resins. The Finish to be water repellent, anti-fungal, breathes out trapped moisture, having unique property of elasticity & flexibility (due to temperature variation no hairline cracks to appear) protective and decorative coating on exterior surfaces such as, concrete & plastered Surface (as per approved) in colour and pattern as per direction of engineer-in-charge. The works include providing and laying one coat of primer and sealer mixed in equal ratio followed by one coat of base coat with steel trowel made of natural stone crushed powder, 2nd coat to be applied with steel trowel and finished by acrylic trowel or spray gun of natural stone crushed powder added with granite chips. Final coat of ultra protect shall be applied with roller/spray diluted with water, (as per manufacturer's specification) including cost and conveyance of all material, labour, sundries, tools and machinery etc. all complete. (The base preparation with putty shall be included & will not be paid separately). All complete as per direction and approval of Architect / Engineer-in-charge.

4945

-

-

... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) at all heights and levels with required scaffolding.

551

-

-

... More
Providing & Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete on steel work at all heights and levels with required scaffolding.

234

-

-

... More
Providing & applying 50 micron powder coating over MS work as per IS Code : 13871.

100

-

-

... More
Finishing walls with water proofing cement paint of required shade :

-

-

-

... More
New work (Two or more coats applied @ 3.84 kg/10 sqm) at all heights and levels with required scaffolding.

954

-

-

... More
SUB HEAD 8.0: DOOR, WINDOW, GLAZING & ALUMINIUM WORK

-

-

-

... More
Providing and Fixing of Semi Unitized (Open Groove System) Structural Glazing system from Technal/ Fasado/ Kawneer/ Wicona/ Sapa/ Vitrosca/ Vs1 with inbuilt drainage and pressure equalization with structure designed for wind load as per IS-875 Part III and shall not be less than 1.75 Kpa for this project, fixed to existing RCC / Building structure with suitable HDG brackets and G.I. anchor fasteners (to existing RCC/ Steel structure at floor to floor level) duly powder coated as per requirement. - SYSTEM COST ONLY. 1. Performance Criteria: System must follow the relevant ASTM Standards ASTM E 283-04, ASTM E 331-09, ASTM E 330-10 and AAMA Standard AAMA 501.1-05, AAMA 501.4.9. System must be tested for Air infiltration at +300 Pascal, Static & dynamic Water penetration at +600 Pascal, wind load serviceability at +/- 1750 Pascal, Seismic floor displacement +/- 10mm and proof load for 150% of design wind pressure. System selected must have tested from International Testing laboratories/ NABL Test House and Test reports must be submitted with the tender. 2. For Profiles : Using heavy duty aluminium extruded built up profiles of approved make i.e. Mullion & Transome confirming to alloys per grade 6063 T5 or T6 as per BS 1474. All gaskets shall be micro wave cured EPDM gaskets with necessary shore hardness and with warranty of 10 years. All mullion transom connections will be using specially developed connectors and with SS screws.

180

-

-

... More
3. For Profiles coating : All profiles shall be pure polyester powder coated with SUPER DURABLE 10 year Warranty product from QUALICOAT approved Powder manufacturer's, conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge., 60 microns thick average thickness. 4. For Galvanized Brackets : Galvanizing on M.S Bracket to be done conforming toIS:4759-1996 upto 610 gms. Per sqm. (80-90 micron thick) 5. For Silicone : The structural glazing system shall not have any visible member from outside and the cut to size glass panel shall be fixed to an aluminium subframe with structural silicone of required bite as per structural requirement with 6.4 mm thick Norton/Bow tape around the periphery of the glass unit and the subframe shall be mounted with alum. cleat on the structural glazing main frame with S.S. Screws @ 350 - 400c/c. 6. For Profile Protection : All the aluminium profiles shall be provided with protective tape for safety against external scratches at site. The protective tape shall be removed only at the time of handing over or as per instructions of Site-in-charge.

-

-

-

... More
7. For Alignment : The glazing frame shall be aligned for the entire height and for the entire width of each transom. a. The Expansion joints between two mullions should be created by inserting 200 mm long Aluminium Expansion Sleeve Tube, and the expansion gap should not be more than 10 mm. The Expansion joint must be properly sealed all around with weather sealant to make it water tight. b. The periphery of the glazing shall be sealed both from inside and outside with silicone weather sealant of approved grade to make the glazings water / airtight. c. Gaps up to 10mm between the peripheral aluminum member and masonry / R.C.C. / stone shall be sealed by inserting Backer Rod and weather silicon sealant. Wherever the gaps are expected to be more than 10 mm, shall be sealed by providing and fixing of 2mm thick aluminium sheet / 4 mm thick ACP flashing)s (To be paid in separate line item )duly Pure Polyester powder coated to 50-60 Micron thickness in approved colour / anodized to 20 - 25 microns bent to required profile as per site requirement d. A 10 year warranty shall be obtained from the structural sealant manufacturer for all structural sealant applied at site and submitted to the owners on completion of the work.

-

-

-

... More
Providing and fixing of 24mm Clear DGU (6mm Clear Toughened Glass+12mm Air Gap+6mm Clear Toughened Glass) pasted on fully unitized framework with Structural Silicones. Glass specification:- The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. Colour of glass should be matched existing Academic Block/ as decided by sacntioning authority. Makes & Model:- SKN 144 of saint gobain/ Clear pearl of Asahi or Approved equuvalent.

1

-

-

... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):

-

-

-

... More
Glass specification:- The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. Colour of glass should be matched existing Academic Block/ as decided by sacntioning authority. Makes & Model:- ST 136 of saint gobain/ Nectar clear SC 33/35 of Asahi or Approved equuvalent.

776

-

-

... More
Extra Over System rate for Providing and fixing powder coated aluminium Side Hung Doors from Technal/ Kawneer/ Fasado/ Wicona/ Sapa/ Vitrosca/ Vs1with extruded built up , standard tubular and other sections as per List of makes confirming to IS : 1285, powder coated to required shade. (minimum powder coating of 60 micron average), Aluminium tubular section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required with special Aluminium die cast corner cleats, Aluminium snap on beading with microwave cured EPDM gaskets for glazing/ panelling, stainless steel screws, all complete as per architectural drawing and as directed. Cermone Handle, heavy duty Hinges, Door closer with cylinder lock and key etc from system manufacturer.

134

-

-

... More
Providing & fixing flashing aluminium sheet powder coated (55 microns) as per approved shade bent to required profile and shape to seal the sill , soffit including framework , drilling holes with an electric drill , inserting PVC sleeves, stainless steel screw of 8 x 38 mm at a spacing of 300mm complete in all respect. This item includes all visible flashing required to seal all the glazing, terminations, skylights, joints to make all the system air & water tight.

90

-

-

... More
Providing and fixing powder coated aluminium windows from Technal/ Kawneer/ Fasado/ Wicona/ Sapa/ Vitrosca/ Vs1 with extruded built up , standard tubular and other sections as per List of makes confirming to IS : 1285, powder coated to required shade. (minimum powder coating of 60 micron average), Aluminium tubular section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required with special Aluminium die cast corner cleats, Aluminium snap on beading with microwave cured EPDM gaskets for glazing/ panelling, stainless steel screws, all complete as per architectural drawing and as directed. Handle with 4 point locking from Alualpha / Giesse / Caldwell and friction stays from security style UK / Cotswold / Giesse.

-

-

-

... More
Two Shutter Side Hung Window One Centre Fixed Panel & Top Bottom Fixed Panel

90

-

-

... More
Providing and fixing Factory fabricated aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

-

-

-

... More
For fixed portion

-

-

-

... More
Powder coated aluminium (minimum thickness of powder coating 50 micron)

2450

-

-

... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots/ sliders for sliding windows/ doors and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required & Handles required for windows.

-

-

-

... More
Powder coated aluminium (minimum thickness of powder coating 50 micron)

120

-

-

... More
Providing and fixing of single leaf shutter frame profile of 125x55mm made of 1.2mm GI conforming to IS 277 (120GSM Grooved frame shall include PVC smoke seal. Finished in desired colour of powder coating not less than 50microns including suitable anchors & puff grouting all inclusive for fixing of frame - for all utility and all general application.

1

-

-

... More
Providing wood work in second class teak wood frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with holdfast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

4.25

-

-

... More
Flush Door

-

-

-

... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

-

-

-

... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

172

-

-

... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

172

-

-

... More
Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured).

17

-

-

... More
Providing & fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

-

-

-

... More
1.0 mm thick

344

-

-

... More
Same as above but extra for using 1.0 mm thick PVC Sheet of approved shade fixing with suitable adhesive.

136

-

-

... More
Providing & fixing 1mm thick SS Kick Plate as per design & drawing.

2

-

-

... More
Providing and fixing SS hanging floor single rubber door stopper.

96

-

-

... More
SS Tower Bolt 300mm

96

-

-

... More
SS Handle 125mm

62

-

-

... More
Providing & fixing Mortise cylinder lock with a 55mm backset, 72mm center distance, and a 24mm square forend. The lock features a stainless steel (SS) matt double cylinder, measuring 40+40 = 80mm, and is non-master keyed. It comes with a matt nickel hollow and SS lever handle, along with a cylinder escutcheon. The installation shall be completed in all respects as per the direction of the Engineer-in-charge. Additionally, provision for a master key system shall be included, allowing for future upgrades if required. The work must be executed by the manufacturer's authorized applicator to ensure compliance with all specified standards and quality requirements.

34

-

-

... More
Double Leaf doorset - Insulated Fire rated doorset (FD 120) - Staircase / exit pathway application / Refuge area.

-

-

-

... More
Providing and fixing of ISI marked fire doors as per IS 3614:2021, 120 minutes fire rating with 30 minutes insulation double leaf doorset tested to IS/ISO 3008. Doorset shall include grooved step frame profile of 125x75mm, made of 1.2mm GI (120GSM) and 60mm thick shutter made of 1.2mm GI (120GSM) with infill of 120kg density mineral wool. Grooved frame shall include EPDM smoke seal. Include hardwares, minimum 6nos SS ball bearing hinges of SS304 100x89x3mm, 1no of Single point Panic device and external trim with key cylinder on active leaf and 1no two point Panic device on the inactive leaf, tested as per EN1125 and CE marked. 2no of Door closer with spring size of EN 3-5, as per EN1154 and CE marked. 1no door coordinator for sequencing. 2nos vision panel 200 x 300 with 6mm clear fire rated glass and finished in desired colour of powder coating not less than 50microns including suitable anchors & fire rated puff grouting all inclusive for fixing of doorset - for staircase / exit pathway / Refuge area applications.

66

-

-

... More
Single Leaf doorset - Insulated Fire rated doorset (FD 120) - Staircase / exit pathway application / Refuge area.

-

-

-

... More
Providing and fixing of ISI marked fire doors as per IS 3614:2021, 120 minutes fire rating with 30 minutes insulation double leaf doorset tested to IS/ISO 3008. Doorset shall include grooved step frame profile of 125x75mm, made of 1.2mm GI (120GSM) and 60mm thick shutter made of 1.2mm GI (120GSM) with infill of 120kg density mineral wool. Grooved frame shall include EPDM smoke seal. Include hardwares, minimum 3nos SS ball bearing hinges of SS304 100x89x3mm, 1no of Single point Panic device and external trim with key cylinder on active leaf and 1no two point Panic device on the inactive leaf, tested as per EN1125 and CE marked. 1no of Door closer with spring size of EN 3-5, as per EN1154 and CE marked. 1no door coordinator for sequencing. 1nos vision panel 200 x 300 with 6mm clear fire rated glass and finished in desired colour of powder coating not less than 50microns including suitable anchors & fire rated puff grouting all inclusive for fixing of doorset - for staircase / exit pathway / Refuge area applications.

18

-

-

... More
Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer numeric control) routed of approved design by Engineer-in-charge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/ moisture proof and fire retardant and fixing on M.S (mild steel) frame made of 25 x 25 x 1.5 mm square hollow box section including applying a priming coat of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In- Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately.

234

-

-

... More
Providing and fixing Aluminium Powder coated Louvered shutter with required shape and all necessary fittings and fixtures. All complete as per direction of Engineer-in-charge/ Architect.

990

-

-

... More
SUB HEAD 8.0 : STEEL WORK

-

-

-

... More
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

-

-

-

... More
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

12031

-

-

... More
Providing and fixing stainless steel (Grade 304) brushed finished railing in brushed finish made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

7520

-

-

... More
Providing and fixing a stainless steel (SS) handrail brushed finish for the staircase. The handrail shall be fabricated from high-quality stainless steel grade 304/316, ensuring durability and resistance to corrosion. The handrail shall have a diameter of 50 mm and shall be installed at specified heigth from the finished floor level of the staircase. The handrail shall be securely fixed to the staircase using stainless steel brackets, spaced at intervals not exceeding 1 meter. The brackets shall be anchored to the staircase structure with suitable fasteners to ensure stability and safety. All joints and connections shall be welded or mechanically fastened as per the design requirements, ensuring a smooth and seamless finish. The brushed finish shall be uniform and free from any scratches or blemishes. The entire installation shall comply with relevant IS codes and safety standards, providing a safe and aesthetically pleasing handrail for the staircase. All work shall be carried out with precision and care, ensuring a high-quality finish and long-lasting performance.

2700

-

-

... More
SUB HEAD 9.0 : FALSE CEILING

-

-

-

... More
Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm center to center, one flange f1Xed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x1Ox0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm center to center, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm center to center, shall be fixed in a direction perpendicular to G.I. intermediate channel with

-

-

-

... More
connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm center, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c:Jc, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound ,jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

-

-

-

... More
12.5 mm thick tapered edge gypsum moisture resistant board

2098

-

-

... More
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanizing @ 120 grams per sqm including both side) consisting of main 'T runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm center to center, and cross "T" of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main'T' at 600 mm center to center to form a grid of 1200x600 mm and secondary cross 'T' of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200 x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a perimeter wall..

2114

-

-

... More
...angle pre-coated steel of size(24x24X3000mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm center to center with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main 'T' runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanized steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm center to center along main 'T. Bottom exposed with 24 mm of all T-sections shall be pre-painted with polyester baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-charge/ Architect.

-

-

-

... More
Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/mK.

-

-

-

... More
Acoustical Grid Tile

-

-

-

... More
Providing and Installing of Acoustical micro look edge 600x600mm and 15 mm thickness, easily demountable tile, Option of weekly dusting, vacuum cleaning, manufactured from High density glass wool utilizing the 3RD Technology, visible surface is a batch painted glass tissue in white, back of the tile covered with glass tissue. 83% light reflectance. Tiles classified under sound absorption class A with "alpha w " value of 0.95 at minimum 200mm o.d.s. Sound absorption test results measured according to EN ISO 354 and classification according to EN ISO 11654 and the single value rating for NRC value - 0.9 according to ASTM C 423 . Tiles should have white colour " White 500 " nearest NCS colour sample S 0500 - N with tiles withstand a permanent ambient RH up to 95% at 30 degree C without sagging , warping and delaminating ( ISO 4611).Ceiling is consist of Axiom profile for hanging effect wherever required. Axioms channels 50mm mm wide face with 19.3mm(+/-0.50mm) horizontal legs, straight sections with special bosses formed for attachment to the Axiom tee-bar connection clip or hanging clip, extruded Aluminum, factory finished (minimum 34-50 microns factory - applied baked polyester paint). These are Aluminum Extrusions formed with distinct architectural detail groove on top and bottom flanges and special bosses to receive the tee bar connection clips and splice plates, to provide positive mechanical lock with no visible fasteners. Hang the sections of Axiom Trim onto the grid system by engaging the top ear of the connection clip under the boss of the channel trim. Slide the lower leg downward to engage the lower boss on the trim and secure by tightening the locking screw.

2533

-

-

... More
Complete the installation of all channel trims sections. Install and secure the splice plates, corner pieces, alignment plates etc. Make adjustments as necessary to properly align the complete installation. Complete in all respect as per the direction of Architect/Engineer-in-charge.

-

-

-

... More
Framing system:- Providing and fixing Gypsteel pre coated (Exposed portion only) GI T Grid system in 600x600mm module which includes providing and fixing wall angle along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm centers. Then suspending the main tee of size from the soffit with help of soffit cleat, rawl plugs and wire rod with Leveling spring clip at 1200mm c/c. 1200mm Cross Tee is then interlocked into the pre-cut slots in the main Tees at 600mm centers in direction perpendicular to the main Tee to make a grid of 600x600mm.Finally 600mm Cross tees are then interlocked into the pre cut slots in the 1200mm tees at 1200mm centers and in direction parallel to the main tee. Cross Tees having length more than 600mm are to be supported independently. Dimensions:- Main Runner ‘T’ section of size 14x38mm hot dipped galvanized steel body and capped with precoated of dipped galvanized steel and 3.6mtr. Long. Cross Runner ‘T’ section of size 14x25mm hot dipped galvanized steel body and capped with precoated of dipped galvanized steel and 1.2/0.6mtr. Long. Perimeter wall angle of hot dipped galvanized steel angle body of size 19x19mm and 3.05mtr. long. Complete in all respect as per the direction of Architect/Engineer-in-charge. Cost is inclusive of all necessary scaffolding.

-

-

-

... More
SUB HEAD 10.0 : WATER PROOFING WORK

-

-

-

... More
Note: All waterproofing work shall be executed only through approved agencies and a ten year guarantee is to be submitted to the Owner on approved proforma.

-

-

-

... More
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on new terrace/ Chajjas/ Sunken portion of WC: Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. Cost in inclusive of 15mm thick protection layer in cement mortar 1:3 (1 part cement : 3 part of coarse sand) mixed with water proffing compound. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge.

8417

-

-

... More
Providing and laying an avgerage of 100 mm thick M20 grade PP fiber reinforced concrete screed with Min. 75 mm thick at the rain water outlets, laid to a slope of 1 : 120, including saw cutting (approx. 6mm W x 30mm D) at 3MX4M panels within 24 hours of concrete placement and filling the groove with Expanded Polyethylene backer rod keeping the top approx. 10 mm depth open and sealing the groove on the top after 28 days of concrete placement with PU sealant or equivalent, and making angle fillet of 100mmX100mm using M20 grade concrete at the corners, compaction, curing for 7 days etc. complete. All complete as per direction of Engineer-in-charge.

4209

-

-

... More
Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) 78, solar reflection 0.70 and initial emittance 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner.

3826

-

-

... More
Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofing treatment to the Existing Roof surface/Chajjas/Sunken portion of WC:Bathroom applied @ 1.2L/per m2,having tensile strength greater than 1.5N/mm2, elongation greater than 300% with solid content not less than 60% in 2 coats including surface preparation, priming the surface with water based acrylic primer @0.1 L/m2, and spreading 60 gsm geotextile between two top coats completely as per specification. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge.

987

-

-

... More
Providing & laying broken brick bat in sunken filling mixed with Manufactured/ Natural sand. The broken brick bats shall be of good quality and of appropriate size as directed by the Engineer-in-Charge. The sand used for mixing shall be clean, well-graded, and free from impurities. The mixture shall be prepared in the specified proportions to ensure proper compaction and stability. All Complete as per direction of Engineer-in-charge / Architect.

254

-

-

... More
Providing and laying 200mm micron Polythene sheet with minimum overlap of 150mm at jointing area. All complete as per direction of Engineer-in-charge/ Architect.

4759

-

-

... More
Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation of 50% applied @ 1.5 kg/m2 for internal side waterproofing in two layers with waiting period of 4-6 hrs per layer and food grade epoxy coating in two coats certified by CFTRI Mysuru, including surface preparation completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge.

180

-

-

... More
Providing and laying waterproofing treatment by chemical injection grout process on retaining walls and raft of basement using 25mm dia M.S nozzles inserted minimum 1/3 thickness of walls, and 1/3 thickness of basement raft & U.G Sump raft placed and fixed @ 0.7 m C/C distance in both directions and @ 0.75 m C/C along construction joints, consisting of injecting cement slurries of different viscosities under pressure by pump using water proofing grout @ 225 gm/50 kg of cement or approved equivalent make conforming to IS: 2645 and as per manufacturer's specification and sealing of nozzles after the injection operation with suitable admixture. & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge.

180

-

-

... More
The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

-

-

-

... More
Providing and laying water proofing treatment to the Retaining wall area with PU Elastomeric Single component liquid applied, cold applied, moisture cured high tensile elastomeric PU waterproofing membrane having elongation of more than 400% and having solid content of above 90% @ 1.6kg per m2 in 2 coats to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g/ m2. The cost is inclusive of surface preparation, crack filling, repair of loose mortar etc. completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge.

1209

-

-

... More
Providing and laying water proofing treatment to the Rafts, Below grade slab, Lift pits, water retaining structures with fully bonded High Density Polyethlene Membrane (HDPE) of 1.2mm composite thickness and having tensile strength of 25 MPa (as per ASTM D 412), elongation of 500% (as per ASTM D 412), puncture resistance of 1000N (as per ASTM E 154), peel adhesion to concrete 1200N/m (as per ASTM D 903), hydrostatic head resistance 70m (as per ASTM D 5385). The system should be fully bonded to the RCC thereby conforming to IS 16471:2017 requirements of UG waterproofing structures. The membrane should be minimum 2.4m wide to reduce the number of joints with minimum 75mm factory made selvedge’s and comprising of an HDPE layer and a pressure sensitive adhesive layer which is covered by a weather proof protective and trafficable granular layer to protect self-adhesive polymer layer, etc, including surface preparation completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge.

6147

-

-

... More
SUB HEAD 11.0 : MISC WORK

-

-

-

... More
Chemical Rebaring of TMT Bars with HILTI or approved makes for minimum 12xDia of rebar depth, Complete the work as per manufacturer specification & as directed by the Architect/ Engineer-in-charge. Price is only for Rebaring, cost of TMT bar will be paid in respective item.

-

-

-

... More
8mm Dia

10

-

-

... More
10mm Dia

10

-

-

... More
12mm Dia

10

-

-

... More
16mm Dia

10

-

-

... More
20mm Dia

10

-

-

... More
25mm Dia

10

-

-

... More
Providing & fixing HILTI or approved makes chemical Anchor fasteners, Complete the work as per manufacturer specification & as directed by the Architect/ Engineer-in-charge.

-

-

-

... More
12mm Dia for 120mm Anchoring depth

50

-

-

... More
16mm Dia for 160mm Anchoring depth

20

-

-

... More
20mm Dia for 200mm Anchoring depth

20

-

-

... More
Core Cutting in RCC Wall/ Slab/ Beam for depth up to 250mm

-

-

-

... More
50mm Dia

20

-

-

... More
75mm Dia

20

-

-

... More
100mm Dia

20

-

-

... More
125mm Dia

20

-

-

... More
150mm Dia

20

-

-

... More
200mm Dia

20

-

-

... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.

260

-

-

... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

44

-

-

... More
SUB HEAD 12.00 : HORTICULTURE & LANDSCAPING

-

-

-

... More
Trenching in ordinary soil up to a depth of 60 cm including removal & stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).

100

-

-

... More
Supplying and stacking of good earth at site including royalty and carriage up to 1 km (earth measured in stacks will be reduced by 20% for payment).

100

-

-

... More
Supplying and stacking sludge at site including royalty and carriage up to 1 km (sludge measured in stacks will be reduced by 8% for payment).

30

-

-

... More
Supplying and stacking at site dump manure from approved source, including carriage up to 1 km (manure measured in stacks will be reduced by 8% for payment):

-

-

-

... More
Screened through sieve of I.S. designation 20 mm

15

-

-

... More
Screened through sieve of I.S. designation 16 mm

15

-

-

... More
Screened through sieve of I.S. designation 4.75 mm

15

-

-

... More
Rough dressing the trenched ground including breaking clods.

200

-

-

... More
Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.

200

-

-

... More
Fine dressing of the ground

200

-

-

... More
Spreading of sludge, dump manure and/ or good earth in required thickness as per direction of Officer-in-charge (Cost of sludge, dump manure and/ or good earth to be paid separately).

50

-

-

... More
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge.

150

-

-

... More
Grassing with selection No.1 grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the good earth shall be paid for separately).

-

-

-

... More
In rows 5 cm apart in both directions

200

-

-

... More
With grass Turf

50

-

-

... More
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately).

50

-

-

... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :

-

-

-

... More
Holes 1.2 m dia and 1.2 m deep

10

-

-

... More
Holes 90 cm dia, and 90 cm deep

10

-

-

... More
Holes 60 cm dia, and 60 cm deep

20

-

-

... More
Holes 45 cm dia, and 45 cm deep

20

-

-

... More
Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge.

100

-

-

... More
Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 nos ( 3 nos horizontal & 4 nos vertical "U" shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge.

-

-

-

... More
Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4 mm

150

-

-

... More
Top inside dia 30 cm, outer bottom dia 20 cm, total height 30 cm with wall thickness of 25.4 mm

150

-

-

... More
Providing Square Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size), reinforced with 7 nos. (3 nos horizontal & 4 nos vertical "U" shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge.

-

-

-

... More
Top inner width 35 cm, outer bottom width 25 cm, total height 35 cm and wall thickness 25.4 mm

150

-

-

... More
SUB HEAD 13.00 : SIGNAGE

-

-

-

... More
STEEL DIRECTIONAL HANGING SIGNAGE

-

-

-

... More
Providing and fixing of Steel directional hanging Signage,304 Grade, 16 Guage with engraved texts and cutout pictograms. Fixing provision SS Wires as required. Signage Size 48 "x 10" inch, all complete as per direction of Engineer-in-charge & Architect.

44

-

-

... More
FIRE EVACUATION MAP / SIGN.

-

-

-

... More
Providing and fixing of Clear Acrylic sandwich frame of 3mm & 2mm acrylic with Evacuation Plan Printed on photoluminescent media and inserted between the two frames. Should be fixed on the wall using 4 Screw/ SS studs. Size 12 inch x 17 all complete as per direction of Engineer-in-charge & Architect.

22

-

-

... More
FIRE SAFETY SIGNAGE

-

-

-

... More
Providing fabricating and fixing of Steel signage sheet at base with engraved plan Complete including fixing on wall with screws and washers, all complete as per direction of Engineer-in-charge & Architect.

-

-

-

... More
Photoluminescent, Fire Hose Reel - 10"x8"

88

-

-

... More
Photoluminescent, Fire Exit / Escape Sign - 18"x6"

88

-

-

... More
Photoluminescent, Floor Level - 18"x6"

66

-

-

... More
Photoluminescent, Fire Alarm Call Point - 10"x8"

22

-

-

... More
Photoluminescent, Fire do not use lift- 10"x8"

22

-

-

... More
Photoluminescent Signs, Fire Extinguishers - 10"x8"

66

-

-

... More
INTERNAL PLUMBING WORKS

-

-

-

... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

-

-

-

... More
All Kind of soil

126.6

-

-

... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :

-

-

-

... More
All kinds of soil

-

-

-

... More
Pipes, cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia

370

-

-

... More
Pipes, cables etc. exceeding 300 mm dia. But not exceeding 600 mm dia

115

-

-

... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

9

-

-

... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

-

-

-

... More
75 mm diameter

8

-

-

... More
110 mm diameter

24

-

-

... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

-

-

-

... More
Single pushfit Coupler

-

-

-

... More
75 mm

2

-

-

... More
110 mm

2

-

-

... More
Single tee with door

-

-

-

... More
75x75x75 mm

2

-

-

... More
110x110x110 mm

2

-

-

... More
Bend 87.5°

-

-

-

... More
75 mm bend

2

-

-

... More
110 mm bend

2

-

-

... More
Shoe (Plain)

-

-

-

... More
75 mm Shoe

2

-

-

... More
110 mm Shoe

2

-

-

... More
Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

-

-

-

... More
75 mm

3

-

-

... More
110 mm

8

-

-

... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

9

-

-

... More
12 mm cement plaster finished with a floating coat of neat cement of mix :

-

-

-

... More
1:3 (1 cement: 3 fine sand)

120.8

-

-

... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

-

-

-

... More
White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

6

-

-

... More
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

6

-

-

... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :

-

-

-

... More
Kitchen sink with drain board - 510x1040 mm bowl depth 200 mm

1

-

-

... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge

50

-

-

... More
Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe.

54

-

-

... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

-

-

-

... More
Flexible pipe - 40 mm dia

1

-

-

... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

50

-

-

... More
Providing and fixing toilet paper holder : C.P. brass

66

-

-

... More
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

50

-

-

... More
Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners, including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on each side of the pipe.

-

-

-

... More
Total bracket length 1040 mm of approved shape and design (for three 100 mm dia pipes)

196

-

-

... More
Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.

66

-

-

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

-

-

-

... More
Internal work - Exposed on wall

-

-

-

... More
20 mm nominal dia Pipes

20

-

-

... More
50 mm nominal dia Pipes

160

-

-

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

-

-

-

... More
15 mm nominal dia Pipes

251

-

-

... More
20 mm nominal dia Pipes

550

-

-

... More
25 mm nominal dia Pipes

88

-

-

... More
32 mm nominal dia Pipes

57

-

-

... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. - External Work

-

-

-

... More
50 mm dia nominal bore

70

-

-

... More
65 mm dia nominal bore

70

-

-

... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :

-

-

-

... More
50 to 80 mm nominal bore

1

-

-

... More
Providing and fixing uplasticised PVC connection pipe with brass unions

-

-

-

... More
45cm length, 15 mm nominal bore

232

-

-

... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :

-

-

-

... More
50 mm diameter pipe

70

-

-

... More
65 mm diameter pipe

70

-

-

... More
Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work :

-

-

-

... More
50 mm dia nominal bore

70

-

-

... More
65 mm dia nominal bore

70

-

-

... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

-

-

-

... More
15mm nominal bore

10

-

-

... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

-

-

-

... More
15mm nominal bore

232

-

-

... More
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

232

-

-

... More
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.

-

-

-

... More
50 mm nominal bore, 242 mm long, weighing not less than 1240 gms

2

-

-

... More
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

152

-

-

... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

-

-

-

... More
50 mm dia

20

-

-

... More
65 mm dia

4

-

-

... More
80 mm dia

2

-

-

... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :

-

-

-

... More
200 mm diameter S.W. pipe

230

-

-

... More
250 mm diameter S.W. pipe

60

-

-

... More
300 mm diameter S.W. pipe

80

-

-

... More
450 mm diameter S.W. pipe

115

-

-

... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:

-

-

-

... More
150 x 100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

2

-

-

... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :

-

-

-

... More
250 mm dia. R.C.C. pipe

60

-

-

... More
300 mm dia. R.C.C. pipe

80

-

-

... More
450 mm dia. R.C.C. pipe

115

-

-

... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :

-

-

-

... More
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions,total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :

-

-

-

... More
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

4

-

-

... More
Extra for depth for manholes: Size 90x80x90 cm

-

-

-

... More
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

0.8

-

-

... More
Constructing Brick Masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top with FPS bricks class designation 75 in cement mortar 1:4 (1 cement : 4 Coarse sand), inside cement plaster 12mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of of neat cement, foundation concrete 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design.

-

-

-

... More
0.91m deep with SFRC cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S:12592, total weight of cover and frame to be not less than 182Kg. fixed in cement concrete 1:2:4 mix (1cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete.(Excavation foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) with common burnt clay F.P.S.(non module) brick of class designation 7.5

5

-

-

... More
Extra depth for circuler type manholes 0.91 m internal dia ( at bottom ) beyond 0.91m to 1.67 m. with common burnt clay F.P.S.(non module) brick of class designation 7.5

2

-

-

... More
Constructing Brick Masonry circular type manhole 1.22 m internal dia at bottom and 0.56m dia at top with FPS bricks class designation 75 in cement mortar 1:4 (1 cement : 4 Coarse sand), inside cement plaster 12mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of of neat cement, foundation concrete 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design.

-

-

-

... More
1.68m deep with SFRC cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S:12592, total weight of cover and frame to be not less than 182Kg. fixed in cement concrete 1:2:4 mix (1cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete.(Excavation foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) with common burnt clay F.P.S.(non module) brick of class designation 7.5

2

-

-

... More
Extra depth for circuler type manholes 1.22 m internal dia ( at bottom ) beyond 1.68m to 2.29 m. with common burnt clay F.P.S.(non module) brick of class designation 7.5

0.6

-

-

... More
Constructing Brick Masonry circular type manhole 1.52 m internal dia at bottom and 0.56m dia at top with FPS bricks class designation 75 in cement mortar 1:4 (1 cement : 4 Coarse sand), inside cement plaster 12mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of of neat cement, foundation concrete 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design.

-

-

-

... More
2.30m deep with SFRC cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S:12592, total weight of cover and frame to be not less than 182Kg. fixed in cement concrete 1:2:4 mix (1cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete.(Excavation foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) with common burnt clay F.P.S.(non module) brick of class designation 7.5

17

-

-

... More
Extra depth for circuler type manholes 1.52 m internal dia ( at bottom ) beyond 2.30m. with common burnt clay F.P.S.(non module) brick of class designation 7.5

6.8

-

-

... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.

205

-

-

... More
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :

-

-

-

... More
For pipes 100 to 250 mm diameter

1

-

-

... More
For pipes 350 to 450 mm diameter

3

-

-

... More
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design :

-

-

-

... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

9

-

-

... More
Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C.Vertical grating with frame complete as per standard design :

-

-

-

... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

5

-

-

... More
Providing and fixing Counter top wash basin with 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings, cutting and making good the walls wherever require:

-

-

-

... More
White Vitreous China Counter Top Wash basin with a single 15 mm C.P. brass pillar tap

44

-

-

... More
Providing and fixing CP Push Valve for urinal of approved quality and colour.

54

-

-

... More
Providing and fixing CP Brass liquid soap container of standard shape with bracket of the same materials with snap fittings of approved quality and colour.

14

-

-

... More
Providing and fixing CP Brass towel ring with concealed fittings arrangement of approved quality and colour.

14

-

-

... More
Providing and fixing CP Brass Coat Hook of approved quality and colour

66

-

-

... More
Providing, Fixing of straight / offset type flexible single body push fit type WC pan connector of with integral single mould sealing fins made of flexible EVA body to be fixed with manufacture supplied grease, including rubber bush / adaptor for use with PP pipe as supplied with the pan connector.

66

-

-

... More
Providing and fixing C.P. brass Two way bib cock of approved quality conforming to IS:8931.

66

-

-

... More
Providing and fixing CP Health faucet to european type W.C. of approved quality and make as approved by engineer in charge.

66

-

-

... More
Providing and fixing CP Brass Single lever mixer for sink of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia.

1

-

-

... More
Providing and fixing CP Brass towel rail complete with brackets with CP brass screws with concealed fittings arrangement of approved quality and colour.

1

-

-

... More
Providing and fixing CP Brass soap Dish Holder with concealed fitting arrangements, of approved quality and colour

1

-

-

... More
Providing and fixing handicap grab bar complete as per manufacture's specifications and direction of Engineer-In-Charge.

12

-

-

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

-

-

-

... More
65 mm outer dia Pipe

92

-

-

... More
80 mm outer dia Pipe

110

-

-

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

-

-

-

... More
40 mm nominal dia Pipes

44

-

-

... More
50 mm nominal dia Pipes

44

-

-

... More
Providing and fixing Forged Brass Ball Valve (Screwed). with setting and gland of superior quality having minimum working pressure of 10 kg/cm2.

-

-

-

... More
15 mm dia

2

-

-

... More
20 mm dia

4

-

-

... More
25 mm dia

2

-

-

... More
32 mm dia

2

-

-

... More
40 mm dia

2

-

-

... More
Providing & fixing Auto Air vent for cold water supply risers, suitable for pressure not less than 15 Kg/Sq.cm.

-

-

-

... More
15 mm dia

2

-

-

... More
Providing and fixing low noise insulated Polyproplene piping system as per DIN EN 12056 and DIN1986-100 with 3 layer pipe made of External layer -PP, middle layer-Mineral reinforced PP, Internal layer-PP. push-fit type, food safe, having high impact and stiffness, offering sound levels of not more than 10 dBA as per DIN 4109 at a flow rate of 2 l/s and having pipe ring stiffness as per 1S0/DIS 9969 and tightness as per EN 1277/B and C and DIN 19560, density of pipe = 1.9 g/cm3, elongation break 50% and tensile strength 20 N/mm2,Coefficient of linear expansion 0.09 mm/mK with all necessary fittings fitted with factory fitted lip ring including cutting and making good the walls, floors, R.C.C. work etc or also incluiding painting with ordinary cement based paint for external installation. (including MS structural support & U clamps as required)

-

-

-

... More
160mm dia

84

-

-

... More
100mm dia

791

-

-

... More
75mm dia

214

-

-

... More
50mm dia

204

-

-

... More
40mm dia

84

-

-

... More
Providing and fixing PP white Trap with minimum 50mm water seal with rubber seal on inlet to push fit hopper for indirect waste connections.

-

-

-

... More
110 mm inlet & 110 mm outlet Long ht

86

-

-

... More
Providing and fixing floor drain (FD) with 50mm outlet and 100 mm inlet having 19mm seal for indirect floor drain (FD). 110 x50mm outlet

52

-

-

... More
Providing and fixing PP Floor clean out Plug & Clean out Plug (COP) for cleaning as required complete complete with all fitting, clamps, accessories and civil works.

-

-

-

... More
110mm dia

39

-

-

... More
160mm dia

4

-

-

... More
Providing and fixing rectangular shape Stainless steel grating with frame for floor traps or drains of required pattern including cutting and making good the floors complete.

138

-

-

... More
Providing and fixing on wall face Ring fit unplasticised - PVC moulded unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type B

-

-

-

... More
200 mm

176

-

-

... More
Supplying and laying of following size DWC SN8 pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 16098, Part II complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

-

-

-

... More
200mm dia

230

-

-

... More
WATER COOLER & PUMPS

-

-

-

... More
Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

-

-

-

... More
65mm

50

-

-

... More
80mm

20

-

-

... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

-

-

-

... More
65mm dia.

2

-

-

... More
Submersible single stage single entry pumps with C.I.body and C.I. two vane enclosed type impeller connected to TEFC submersible motor for 415 volts, 3 phase, 50 cycles including MCC panel with level controllers, auto control, sequential change over facility with one proper working at low level & two proper working at high level with an audible alarm including all interconnectivity cables, with both pumps connected to common outlet header including valves, non return valves, lifting chains, etc. complete in all respect. (One working + One standby/both working in high flow conditions

-

-

-

... More
SEWAGE SUMP PUMP

-

-

-

... More
Capacity : 80 LPM (Solid handiling capacity 35-40mm) Head : 15M No. of Pumps (1 working + 1 standby)

2

-

-

... More
Supply installation, testing and commissioning of water cooler with Inbuilt RO purification + UV(50LPH) .Cooling capacity shall be 60 liter & 80 liter shall be storage capacity. It should have 7 stages purification process, fully automatic, rectangular tank with Forced fin and tube condenser, Non-corrosive SS-304 outer body, Food-grade SS-304 stainless steel inner tank (18/8 or 18/10), PUF insulation, Reciprocating compressor with R22 Refrigerant. Water outlet temp is aprrox 17 deg C, Operating power supply 230 + 10% V AC, 50 Hz, 1 PH, No of Cold water Faucet-2.

48

-

-

... More
Supply, Installation, testing and commissioning of storage type electric hot water heater made out of heavy gauge steel jacket finished with rust proof baked-on glossy white enamel paint, inside glass lined heavy gauge steel tank, 25 mm thick polyurethane foam insulation, thermostatically controlled immersion heater with pilot neon lamp, replaceable magnesium anode bar, suitable for 8.0 bar maximum working pressure, cold water inlet and hot water outlet pipe, suitable length of electrical cable and 15 amp 3 pin plug top, complete in all respect including testing etc.

-

-

-

... More
15 Ltr

1

-

-

... More
INTERNAL FIRE FIGHTING SYSTEM

-

-

-

... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as requried.

60

-

-

... More
Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

-

-

-

... More
150mm width x 50mm depth x 1.6 mm thickness.

40

-

-

... More
Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required

22

-

-

... More
(A) Supplying, installation, testing and commissioning of electric driven terrace pump with Electrical Panel suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)

-

-

-

... More
(B) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520

-

-

-

... More
(C) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.

-

-

-

... More
(D) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.

-

-

-

... More
(E) Suitable cement concrete foundation duly plastered and with anti vibration pads.

-

-

-

... More
450 lpm at 35 m Head

3

-

-

... More
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.

-

-

-

... More
150 mm. Dia

130

-

-

... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

-

-

-

... More
150 mm dia.

364

-

-

... More
100 mm dia.

65

-

-

... More
80 mm dia.

170

-

-

... More
65 mm dia.

95

-

-

... More
50 mm dia.

80

-

-

... More
40 mm dia.

45

-

-

... More
32 mm dia.

110

-

-

... More
25 mm dia.

512

-

-

... More
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal /Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type - A) with blank Gunmetal/Stainless Steel cap and chain as required :

-

-

-

... More
Single headed Stainless steel

17

-

-

... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

-

-

-

... More
150mm dia.

3

-

-

... More
100mm dia.

2

-

-

... More
80mm dia.

23

-

-

... More
50mm dia.

2

-

-

... More
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.

17

-

-

... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :

-

-

-

... More
150 mm dia.

1

-

-

... More
100 mm dia.

2

-

-

... More
80 mm dia.

3

-

-

... More
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.

-

-

-

... More
80 mm dia.

3

-

-

... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :

-

-

-

... More
Stainless Steel (Grade 304)

34

-

-

... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.

-

-

-

... More
20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585

-

-

-

... More
20 mm nominal internal dia gun metal globe valve & nozzle.

-

-

-

... More
Drum and brackets for fixing the equipmets on wall.

-

-

-

... More
Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.

-

-

-

... More
30 m

17

-

-

... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :

-

-

-

... More
Stainless Steel (Grade 304)

17

-

-

... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :

-

-

-

... More
2 way - 100 mm dia M.S. Pipe

2

-

-

... More
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.

3

-

-

... More
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :

-

-

-

... More
Pendent Sprinkler

232

-

-

... More
Upright Sprinkler

12

-

-

... More
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.

3

-

-

... More
Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.

-

-

-

... More
150 mm dia

2

-

-

... More
Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required :

-

-

-

... More
150 mm dia.

1

-

-

... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

-

-

-

... More
25 mm nominal bore

19

-

-

... More
Providing and fixing angle iron (40mm x 40mm x 5mm) door frame and MS sheet (6mm thick) cum glass shutter of size 2.1mtr x 0.9mtr (N.S.) with 25mm x 25mm x 3mm angle frame all around and stiffened in between i/c hinges, handle, locking arrangement, painting with approved synthetic enamel paint i/c sign writing on glass at internal hydrant including providing & fixing S.S. sheet 2mm thick on remaining portion above door to close opening i/c painting etc. as required. Glass shall be 6 mm thick.

17

-

-

... More
Providing and fixing stainless steel standard fireman's axe with heavy insulated rubber handle tested to 20000 volts as per IS : 926 complete.

17

-

-

... More
Providing & fixing of 25mm dia. gunmetal air release valve with all fittings and forged ball valve on header complete as required and as per enclosed specification.

2

-

-

... More
Providing and fixing reinforced neoprene rubber vibration eliminators / expansion joints (to provide relief from stresses at pipe flanges) suitable for upto 20 kg/cm2 pressure, complete as per specification.

-

-

-

... More
80mm dia.

6

-

-

... More
Providing and fixing heavy duty copper armored cables 1.1 KVA grade including necessary support clamps at ceiling level and connection legs complete in all respects.

-

-

-

... More
Power cable 3 core 16 Sq.mm

45

-

-

... More
Supply, installation, testing and commissioning ISI marked (IS:15683) Fire Extinguisher, Carbon-di-oxide type capacity 4.5 Kg. Flat base including valve, discharge hose of not less than 10 mm dia, 1M long and complete in all respects including initial fill with CO2 gas conforming to IS:307-1966 and walll suspension braket as required as per specifications.

21

-

-

... More
Supply, installation, testing and commissioning of 6kg ABC (Powder Type) Fire Extinguisher. Mild Steel Cylinders ISI marked fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged with ABC 90 powder (Mono Ammonium Phosphate) pressured by Nitrogen complete in all respects including wall suspension bracket and conforming to IS:15683 as required as per specifications.

21

-

-

... More
Providing, fixing, testing and commissioning of control panel for Terrace Booster pumps . Incoming: MCCB 125A 1 set of Phase indicating lamps, 1 set of 125A Al bus bars, 3No Ammeter, 3No Voltmeter with phase selector switch Feeder for Booster Pumps - 3 No. 3 No. 50A TP MCCB without releases. DOL starter with over load relay, single phase preventor and indicating lamps with ON/OFF push buttons. 3 No. Automanual selector switch. Suitable for booster pumps

1

-

-

... More
FIRE DETECTION & ALARM SYSTEM (ABNE & BH5)

-

-

-

... More
Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/ recess with stainless steel chain & hammer assembly complete with glass and push button etc.as required.

14

-

-

... More
Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.

14

-

-

... More
Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/ zone covered, complete with all connections, interconnections as required. 4 Zone

1

-

-

... More
Supplying, installation, testing & commissioning of addressable beam detector with short circuit isolator (inbuilt or seperate) complete with emitter and receiver including connections with remote test features etc complete as required.

2

-

-

... More
Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.

2000

-

-

... More
ELECTRICAL WORKS

-

-

-

... More
1. AC DISTRIBUTION PANEL BOARDS

-

-

-

... More
Supplying, installation, testing and commissioning of floor mounted indoor type cubicle panel of size not less than 2.1 m (H) x 2.4 m (W) x 0.3 m (D) made out of 2 mm thick CRCA sheet for frame work and covers, compartmentalised, dust and vermin proof, hinged doors with knobs 3 mm thick gland plate i/c cleaning and finishing with 7 tank process for powder coating in approved shade, 1000 amps capacity TPN aluminium bus bars of high conductivity and all connection to individual circuits from the bus bar shall prefebly be solid connections, DMC/ SMC bus bar supports and necessary cable supports for clamping the cable in the cable alley, PVC sleeves or insulated in approved manner for all connections and bus bar, bottom base channel of ISMC 100 x 50 mm (9.2 Kg/m), G.I earth bar of size 50 mm x 6 mm at the rear for the entire width of the panel with 2 Nos. earth studs, connections from bus bar to switchgear and control wiring with required size FRLS PVC insulated copper conductor cable of suitable size, cable alley, separate gland plate for each cable entry 3mm thick gland plates including providing and fixing the following switchgear, as per attached technical specifications, as required. (MDB-AB)

1

-

-

... More
I) Incomer:

-

-

-

... More
a) 1600A, 50 KA breaking capacity (Ics) 4 pole MCCB with MICROPROCESSOR release with rotary handle and spreader terminals complete as required with required CT, Digital multifuction meter with RS 45 port, LED indication lamps, surge protection - 2 Nos. (Incomer termination shall be invariably through terminal blocks)

-

-

-

... More
b) 800A, 50 KA breaking capacity (Ics) 4 pole MCCB with MICROPROCESSOR release with rotary handle and spreader terminals complete as required with required CT, Digital multifuction meter with RS 45 port, LED indication lamps, surge protection - 1 Nos. (Incomer termination shall be invariably through terminal blocks)

-

-

-

... More
II) Bus Bar Chamber:

-

-

-

... More
4 Strip aluminium bus bars of 1600 Amps capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc.

-

-

-

... More
III) Out goings:

-

-

-

... More
a) 630 A, 36KA breaking capacity (Ics) 4 pole MCCB withthermal magnetic with rotary handle and spreader terminals complete as required with required CT, Digital multifuction meter with RS 45 port, LED indication lamps - 1 No.

-

-

-

... More
b) 400 A, 36KA breaking capacity (Ics) 4 pole MCCB withthermal magnetic with rotary handle and spreader terminals complete as required with required CT, Digital multifuction meter with RS 45 port, LED indication lamps - 3 No.

-

-

-

... More
c) 160 A, 36KA breaking capacity (Ics) 4 pole MCCB withthermal magnetic with rotary handle and spreader terminals complete as required with required CT, Digital multifuction meter with RS 45 port, LED indication lamps - 3 No.

-

-

-

... More
d) 100 A, 36KA breaking capacity (Ics) 4 pole MCCB withthermal magnetic with rotary handle and spreader terminals complete as required with required CT, Digital multifuction meter with RS 45 port, LED indication lamps - 1 No.

-

-

-

... More
e) 63 A, 36KA breaking capacity (Ics) 4 pole MCCB withthermal magnetic with rotary handle and spreader terminals complete as required with required CT, Digital multifuction meter with RS 45 port, LED indication lamps - 3 No.

-

-

-

... More
Supplying, installation, testing and commissioning of floor mounted indoor type cubicle panel of size not less than 2.1 m (H) x 1 m (W) x 0.3 m (D) made out of 2 mm thick CRCA sheet for frame work and covers, compartmentalised, dust and vermin proof, hinged doors with knobs 3 mm thick gland plate i/c cleaning and finishing with 7 tank process for powder coating in approved shade, 630 amps capacity TPN aluminium bus bars of high conductivity and all connection to individual circuits from the bus bar shall prefebly be solid connections, DMC/ SMC bus bar supports and necessary cable supports for clamping the cable in the cable alley, PVC sleeves or insulated in approved manner for all connections and bus bar, bottom base channel of ISMC 100 x 50 mm (9.2 Kg/m), G.I earth bar of size 50 mm x 6 mm at the rear for the entire width of the panel with 2 Nos. earth studs, connections from bus bar to switchgear and control wiring with required size FRLS PVC insulated copper conductor cable of suitable size, cable alley, separate gland plate for each cable entry 3mm thick gland plates including providing and fixing the following switchgear, as per attached technical specifications, as required. SDB -1

10

-

-

... More
I) Incomer:

-

-

-

... More
125A, 36 KA breaking capacity (Ics) TPN MCCB with thermal mangnetic with rotary handle and spreader terminals complete as required with required CT, Digital multifuction meter with RS 45 port, LED indication lamps, surge protection - 1 No

-

-

-

... More
II) Bus Bar Chamber:

-

-

-

... More
4 Strip aluminium bus bars of 100 Amps capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc.

-

-

-

... More
III) Out goings:

-

-

-

... More
a) 40A, 10KA breaking capacity TPN MCB, terminals complete as required with required CT, Digital multifuction meter with RS 45 port, LED indication lamps - 7 No.

-

-

-

... More
b) 63A, 10KA breaking capacity TPN MCB, terminals complete as required with required CT, Digital multifuction meter with RS 45 port, LED indication lamps - 7 No.

-

-

-

... More
Supplying, installation, testing and commissioning of floor mounted indoor type cubicle panel of size not less than 2.1 m (H) x 1 m (W) x 0.3 m (D) made out of 2 mm thick CRCA sheet for frame work and covers, compartmentalised, dust and vermin proof, hinged doors with knobs 3 mm thick gland plate i/c cleaning and finishing with 7 tank process for powder coating in approved shade, 630 amps capacity TPN aluminium bus bars of high conductivity and all connection to individual circuits from the bus bar shall prefebly be solid connections, DMC/ SMC bus bar supports and necessary cable supports for clamping the cable in the cable alley, PVC sleeves or insulated in approved manner for all connections and bus bar, bottom base channel of ISMC 100 x 50 mm (9.2 Kg/m), G.I earth bar of size 50 mm x 6 mm at the rear for the entire width of the panel with 2 Nos. earth studs, connections from bus bar to switchgear and control wiring with required size FRLS PVC insulated copper conductor cable of suitable size, cable alley, separate gland plate for each cable entry 3mm thick gland plates including providing and fixing the following switchgear, as per attached technical specifications, as required. SDB -2

10

-

-

... More
I) Incomer:

-

-

-

... More
160A, 36 KA breaking capacity (Ics) TPN MCCB with thermal mangnetic with rotary handle and spreader terminals complete as required with required CT, Digital multifuction meter with RS 45 port, LED indication lamps, surge protection - 1 No

-

-

-

... More
II) Bus Bar Chamber:

-

-

-

... More
4 Strip aluminium bus bars of 100 Amps capacity with heat shrinkable coloured sleeves and i/c DMC /SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc.

-

-

-

... More
III) Out goings:

-

-

-

... More
a) 40A, 10KA breaking capacity TPN MCB, terminals complete as required with required CT, Digital multifuction meter with RS 45 port, LED indication lamps - 5 No.

-

-

-

... More
b) 63A, 10KA breaking capacity TPN MCB, terminals complete as required with required CT, Digital multifuction meter with RS 45 port, LED indication lamps - 7 No.

-

-

-

... More
Supplying, installation, testing and commissioning of floor mounted indoor type cubicle panel of size not less than 2.1 m (H) x 1 m (W) x 0.3 m (D) made out of 2 mm thick CRCA sheet for frame work and covers, compartmentalised, dust and vermin proof, hinged doors with knobs 3 mm thick gland plate i/c cleaning and finishing with 7 tank process for powder coating in approved shade, 630 amps capacity TPN aluminium bus bars of high conductivity and all connection to individual circuits from the bus bar shall prefebly be solid connections, DMC/ SMC bus bar supports and necessary cable supports for clamping the cable in the cable alley, PVC sleeves or insulated in approved manner for all connections and bus bar, bottom base channel of ISMC 100 x 50 mm (9.2 Kg/m), G.I earth bar of size 50 mm x 6 mm at the rear for the entire width of the panel with 2 Nos. earth studs, connections from bus bar to switchgear and control wiring with required size FRLS PVC insulated copper conductor cable of suitable size, cable alley, separate gland plate for each cable entry 3mm thick gland plates including providing and fixing the following switchgear, as per attached technical specifications, as required. SDB HVAC-1

1

-

-

... More
I) Incomer:

-

-

-

... More
400A, 36 KA breaking capacity (Ics) TPN MCCB with thermal mangnetic with rotary handle and spreader terminals complete as required with required CT, Digital multifuction meter with RS 45 port, LED indication lamps, surge protection - 1 No

-

-

-

... More
II) Bus Bar Chamber:

-

-

-

... More
4 Strip aluminium bus bars of 100 Amps capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc.

-

-

-

... More
III) Out goings:

-

-

-

... More
a) 100A, 25KA breaking capacity (Ics) 4 pole MCCB with thermal magnetic with rotary handle and spreader terminals complete as required with required CT, Digital multifuction meter with RS 45 port, LED indication lamps - 3 No.

-

-

-

... More
b) 40A, 10KA breaking capacity TPN MCB, terminals complete as required with required CT, Digital multifuction meter with RS 45 port, LED indication lamps - 2 No.

-

-

-

... More
c) 63A, 10KA breaking capacity TPN MCB, terminals complete as required with required CT, Digital multifuction meter with RS 45 port, LED indication lamps - 3 No.

-

-

-

... More
Supplying, installation, testing and commissioning of floor mounted indoor type cubicle panel of size not less than 2.1 m (H) x 1 m (W) x 0.3 m (D) made out of 2 mm thick CRCA sheet for frame work and covers, compartmentalised, dust and vermin proof, hinged doors with knobs 3 mm thick gland plate i/c cleaning and finishing with 7 tank process for powder coating in approved shade, 630 amps capacity TPN aluminium bus bars of high conductivity and all connection to individual circuits from the bus bar shall prefebly be solid connections, DMC/ SMC bus bar supports and necessary cable supports for clamping the cable in the cable alley, PVC sleeves or insulated in approved manner for all connections and bus bar, bottom base channel of ISMC 100 x 50 mm (9.2 Kg/m), G.I earth bar of size 50 mm x 6 mm at the rear for the entire width of the panel with 2 Nos. earth studs, connections from bus bar to switchgear and control wiring with required size FRLS PVC insulated copper conductor cable of suitable size, cable alley, separate gland plate for each cable entry 3mm thick gland plates including providing and fixing the following switchgear, as per attached technical specifications, as required. SDB HVAC-2

1

-

-

... More
I) Incomer:

-

-

-

... More
400A, 36 KA breaking capacity (Ics) TPN MCCB with thermal mangnetic with rotary handle and spreader terminals complete as required with required CT, Digital multifuction meter with RS 45 port, LED indication lamps, surge protection - 1 No

-

-

-

... More
II) Bus Bar Chamber:

-

-

-

... More
4 Strip aluminium bus bars of 100 Amps capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc.

-

-

-

... More
III) Out goings:

-

-

-

... More
a) 125A, 25KA breaking capacity (Ics) 4 pole MCCB with thermal magnetic with rotary handle and spreader terminals complete as required with required CT, Digital multifuction meter with RS 45 port, LED indication lamps - 5 No.

-

-

-

... More
c) 63A, 10KA breaking capacity TPN MCB, terminals complete as required with required CT, Digital multifuction meter with RS 45 port, LED indication lamps - 3 No.

-

-

-

... More
Supplying, installation, testing and commissioning of floor mounted indoor type cubicle panel of size not less than 2.1 m (H) x 1 m (W) x 0.3 m (D) made out of 2 mm thick CRCA sheet for frame work and covers, compartmentalised, dust and vermin proof, hinged doors with knobs 3 mm thick gland plate i/c cleaning and finishing with 7 tank process for powder coating in approved shade, 630 amps capacity TPN aluminium bus bars of high conductivity and all connection to individual circuits from the bus bar shall prefebly be solid connections, DMC/ SMC bus bar supports and necessary cable supports for clamping the cable in the cable alley, PVC sleeves or insulated in approved manner for all connections and bus bar, bottom base channel of ISMC 100 x 50 mm (9.2 Kg/m), G.I earth bar of size 50 mm x 6 mm at the rear for the entire width of the panel with 2 Nos. earth studs, connections from bus bar to switchgear and control wiring with required size FRLS PVC insulated copper conductor cable of suitable size, cable alley, separate gland plate for each cable entry 3mm thick gland plates including providing and fixing the following switchgear, as per attached technical specifications, as required. UPS OUTPUT PANEL (EL)

1

-

-

... More
I) Incomer:

-

-

-

... More
100A, 10 KA breaking capacity (Ics) TPN MCB with thermal mangnetic with rotary handle and spreader terminals complete as required with required CT, Digital multifuction meter with RS 45 port, LED indication lamps, surge protection - 1 No

-

-

-

... More
II) Bus Bar Chamber:

-

-

-

... More
4 Strip aluminium bus bars of 100 Amps capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc.

-

-

-

... More
III) Out goings:

-

-

-

... More
40A, 10KA breaking capacity TPN MCB, terminals complete as required with required CT, Digital multifuction meter with RS 45 port, LED indication lamps - 7 No.

-

-

-

... More
Supplying, installation, testing and commissioning of floor mounted indoor type cubicle panel of size not less than 2.1 m (H) x 1 m (W) x 0.3 m (D) made out of 2 mm thick CRCA sheet for frame work and covers, compartmentalised, dust and vermin proof, hinged doors with knobs 3 mm thick gland plate i/c cleaning and finishing with 7 tank process for powder coating in approved shade, 630 amps capacity TPN aluminium bus bars of high conductivity and all connection to individual circuits from the bus bar shall prefebly be solid connections, DMC/ SMC bus bar supports and necessary cable supports for clamping the cable in the cable alley, PVC sleeves or insulated in approved manner for all connections and bus bar, bottom base channel of ISMC 100 x 50 mm (9.2 Kg/m), G.I earth bar of size 50 mm x 6 mm at the rear for the entire width of the panel with 2 Nos. earth studs, connections from bus bar to switchgear and control wiring with required size FRLS PVC insulated copper conductor cable of suitable size, cable alley, separate gland plate for each cable entry 3mm thick gland plates including providing and fixing the following switchgear, as per attached technical specifications, as required. (UPS OUTPUT PANEL WS-1)

1

-

-

... More
I) Incomer:

-

-

-

... More
630A, 25 KA breaking capacity (Ics) 4 pole MCCB with thermal mangnetic with rotary handle and spreader terminals complete as required with required CT, Digital multifuction meter with RS 45 port, LED indication lamps, surge protection - 1 No

-

-

-

... More
II) Bus Bar Chamber:

-

-

-

... More
4 Strip aluminium bus bars of 630 Amps capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc.

-

-

-

... More
III) Out goings:

-

-

-

... More
c) 200A, 25KA breaking capacity (Ics) 4 pole MCCB with thermal magnetic with rotary handle and spreader terminals complete as required with required CT, Digital multifuction meter with RS 45 port, LED indication lamps - 3 No.

-

-

-

... More
b) 63A, 10KA breaking capacity TPN MCB, terminals complete as required with required CT, Digital multifuction meter with RS 45 port, LED indication lamps - 9 No.

-

-

-

... More
Supplying, installation, testing and commissioning of floor mounted indoor type cubicle panel of size not less than 2.1 m (H) x 1 m (W) x 0.3 m (D) made out of 2 mm thick CRCA sheet for frame work and covers, compartmentalised, dust and vermin proof, hinged doors with knobs 3 mm thick gland plate i/c cleaning and finishing with 7 tank process for powder coating in approved shade, 630 amps capacity TPN aluminium bus bars of high conductivity and all connection to individual circuits from the bus bar shall prefebly be solid connections, DMC/ SMC bus bar supports and necessary cable supports for clamping the cable in the cable alley, PVC sleeves or insulated in approved manner for all connections and bus bar, bottom base channel of ISMC 100 x 50 mm (9.2 Kg/m), G.I earth bar of size 50 mm x 6 mm at the rear for the entire width of the panel with 2 Nos. earth studs, connections from bus bar to switchgear and control wiring with required size FRLS PVC insulated copper conductor cable of suitable size, cable alley, separate gland plate for each cable entry 3mm thick gland plates including providing and fixing the following switchgear, as per attached technical specifications, as required. (UPS OUTPUT PANEL WS-2)

1

-

-

... More
I) Incomer:

-

-

-

... More
200A, 25KA breaking capacity (Ics) TPN MCCB with thermal mangnetic with rotary handle and spreader terminals complete as required with required CT, Digital multifuction meter with RS 45 port, LED indication lamps, surge protection - 1 No

-

-

-

... More
II) Bus Bar Chamber:

-

-

-

... More
4 Strip aluminium bus bars of 200 Amps capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc.

-

-

-

... More
III) Out goings:

-

-

-

... More
63A, 10KA breaking capacity TPN MCB, terminals complete as required with required CT, Digital multifuction meter with RS 45 port, LED indication lamps - 9 No.

-

-

-

... More
Local control station

-

-

-

... More
100A 4P MCCB with indoor enclosure, indication lamps

1

-

-

... More
630A 4P MCCB with indoor enclosure, indication lamps

1

-

-

... More
63A 4P MCB with indoor enclosure, indication lamps

1

-

-

... More
40A 4P MCB with indoor enclosure

2

-

-

... More
100A 4P MCCB with weatherproof enclosure

2

-

-

... More
125A 4P MCCB with weatherproof enclosure

4

-

-

... More
MS structural steel for panel supports (ISMC75)

0.22

-

-

... More
2. MCB DISTRIBUTION BOARDS

-

-

-

... More
Supplying and fixing following way, three pole and neutral, sheet steel PHASE SEGREGATED MCB distribution board. 415 volts, on surface/ recess, complete with tinned copper bus bars. neutral link, earth bar, din bar, detachable, gland plate. interconnections, phosphatized and powdered painted including earthing etc. as required :

-

-

-

... More
4Way

16

-

-

... More
6Way

7

-

-

... More
8Way

14

-

-

... More
12 way

2

-

-

... More
Supplying and fixing 6 amps to 32 amps rating, 240/415, 'c' series, miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

-

-

-

... More
Single pole

726

-

-

... More
Supplying and fixing 40amps rating double pole, 240 volts, residual current circuit breaker (RCCB) having a sensivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc as required. Make: Siemens/ ABB/ L&T Hager

117

-

-

... More
Supplying and fixing 63amps rating four pole, 415 volts, miniature circuit breaker suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc as required. Make: Siemens/ ABB/ L&T Hager

39

-

-

... More
3. UPS & BATTERIES - FOR EMERGENCY LIGHITNG

-

-

-

... More
UPS : Design, engineering, manufacturing, loading, unloading, transportation, supply, installation, testing & commissioning of UPS system which should have continuous duty, 415 volts, 3Phase, 4wire 50 Hz true on line, double conversion, IGBT based rectifier, transformer less UPS system confirming to latest standards. This also shall have all required items like UPS powerder coated stand, UPS terminal cap, dust filters, In-built SMMP card, UPS software should facilitate event logs for fault analysis, etc., Vendor to furnish GA drawings of UPS. Vendor also has to furnish systems shall be suitable for cell monitoring for up gradation and connectivity to battery monitoring system. UPS shall be offered AC&DC capacitor service life of 5 years and fans shall be 5 years life.

-

-

-

... More
BATTERY : Design, engineering, manufacturing, loading, unloading, transportation, supply, installation, testing & commissioning of 12V, 2V/Cell, Valve regulated lead-acid (VRLA) type maintenance free Batteries. All battery terminals to be provided with 'protection cap', battery shall have spilcontainment sheet, battery to battery looping cables, etc. The Battery bank shall be supplied with interconnecting leads of suitable size copper conductor heat resistant flexible cable with suitable end termination accessories. Each battery shall be suitable for battery monitoring system. DC MCCB suitable for above system, it shall be housed in Sheet steel enclosure, duly powder coated complete with necessary spreaders, shrouds & extended copper bus link & hard wares suitable to terminate copper flexible cable and indication lamps. Powder coated MS stand to be provided by the vendor. Calculations for Back up time & Battery capacity shall be submitted along with the offer.

-

-

-

... More
300KVA 3ph/3ph, Battery Bank suitable for the UPS to provide 20 Min Back up

1

-

-

... More
15KVA 3ph/3ph, Battery Bank suitable for the UPS to provide 90 Min Back up

1

-

-

... More
4. LIGHT FITTINGS

-

-

-

... More
Supply, erection, testing and commissioning of the light fixtures with lamp, control gears, starters, suitable down rods, including all the required accessories, mounting arrangements, required civil works, etc., (the furnished model and makes are indicative, the same shall be finalized in consultation with Client / Architects)

-

-

-

... More
18W surface mounted led tube light

93

-

-

... More
20W surface mounted led down light

51

-

-

... More
9W recess mounted led down light

60

-

-

... More
20W recess mounted led down light

320

-

-

... More
9W surface mounted bulk head light

19

-

-

... More
63W surface mounted led down light medium bay

56

-

-

... More
9W surface mounted led mirror light

24

-

-

... More
36W (2'x2') recess mounted led light

308

-

-

... More
4A. FANS

-

-

-

... More
Supply, erection, testing and commissioning of the FANS with suitable down rods, including all the required accessories, mounting arrangements, required civil works, etc., (the furnished makes are indicative, the same shall be finalized during execution in consultation with Client / Architects)

-

-

-

... More
1200mm sweep BLDC ceiling fans shall have 230V, 28W, most energy effcient motor constructed with Brushless DC technology, 100% pure copper winding, shoud with stand voltage fuctuation, high volt protection, suitable for fan regulators. Make : Havells / Crompton greaves

93

-

-

... More
5. POWER SOCKET

-

-

-

... More
Supplying and fixing suitable size GI box with modular plate and cover in front on ssurface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

1904

-

-

... More
Supplying and fixing suitable size GI box with modular plate and cover in front on ssurface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

176

-

-

... More
6. WIRING

-

-

-

... More
6A. POINT WIRING

-

-

-

... More
Wiring for Light Point / fan point/exhaust fan/ call bell with 1.5 sqmm FRLS PVC insulated Copper Conductor single core cable in surface / recess medium class PVC conduit, with Modular Switch, modular plate, suitable GI box, fan box, fan regulators and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required.

-

-

-

... More
Group C

1904

-

-

... More
6B. CIRCUIT MAIN/LOOPING :

-

-

-

... More
Supply and laying of following sizes of PVC conduit to be concealed in slab / wall / surface mounted with necessary accessories like bends, couplers etc. The rate shall include required civil works, junction boxes of suitable sizes at regular intervals.

-

-

-

... More
Wiring for circuit / submain wiring alongwith earthwire with the following size of FRLS PVC insulated copper conductor, single core cable in surface 25/32mm PVC conduit 2mm thickness as required 2x1.5 sq.mm + 1x1.5 sq.mm earth wire

343

-

-

... More
Wiring for circuit / submain wiring alongwith earthwire with the following size of FRLS PVC insulated copper conductor, single core cable in surface 25/32mm PVC conduit 2mm thickness as required 2x2.5 sq.mm + 1x1.5 sq.mm earth wire

29505

-

-

... More
Wiring for circuit / submain wiring alongwith earthwire with the following size of FRLS PVC insulated copper conductor, single core cable in surface 25/32mm PVC conduit 2mm thickness as required 2x4 sq.mm + 1x2.5 sq.mm. earth wire

10

-

-

... More
7. CABLEING SYSTEM

-

-

-

... More
7A. POWER CABLE

-

-

-

... More
Supplying of PVC insulated, heavy duty, aluminium conductor 1.1KV grade armoured MV cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970

-

-

-

... More
1CX400Sqmm Un.Ar, Cu

165

-

-

... More
1CX6Sqmm Un.Ar, Cu

165

-

-

... More
3.5CX120Sqmm Ar, Al

135

-

-

... More
3.5CX185Sqmm Ar, Al

135

-

-

... More
3.5CX400Sqmm Ar, Al

10

-

-

... More
3.5CX50Sqmm Ar, Al

650

-

-

... More
3.5CX50Sqmm Un.Ar, Cu

35

-

-

... More
4CX10Sqmm Ar, Al

570

-

-

... More
4CX16Sqmm Ar, Al

1525

-

-

... More
4CX25Sqmm Ar, Al

205

-

-

... More
4CX4Sqmm Ar, Cu

235

-

-

... More
4CX4Sqmm Un.Ar, Cu

15

-

-

... More
7B. POWER CABLE TERMINATION

-

-

-

... More
Supplying and making end termination with copper gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1KV grade as required

-

-

-

... More
1CX400Sqmm Un.Ar, Cu

20

-

-

... More
1CX6Sqmm Un.Ar, Cu

20

-

-

... More
3.5CX120Sqmm Ar, Al

6

-

-

... More
3.5CX185Sqmm Ar, Al

8

-

-

... More
3.5CX400Sqmm Ar, Al

1

-

-

... More
3.5CX50Sqmm Ar, Al

12

-

-

... More
3.5CX50Sqmm Un.Ar, Cu

12

-

-

... More
4CX10Sqmm Ar, Al

22

-

-

... More
4CX16Sqmm Ar, Al

64

-

-

... More
4CX25Sqmm Ar, Al

6

-

-

... More
4CX4Sqmm Ar, Cu

10

-

-

... More
4CX4Sqmm Un.Ar, Cu

4

-

-

... More
7C. POWER CABLE ERECTION

-

-

-

... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of size upto 35sq.mm in the existing masonary open duct as required:-

-

-

-

... More
1CX400Sqmm Un.Ar, Cu

165

-

-

... More
1CX6Sqmm Un.Ar, Cu

165

-

-

... More
3.5CX120Sqmm Ar, Al

135

-

-

... More
3.5CX185Sqmm Ar, Al

135

-

-

... More
3.5CX400Sqmm Ar, Al

10

-

-

... More
3.5CX50Sqmm Ar, Al

650

-

-

... More
3.5CX50Sqmm Un.Ar, Cu

35

-

-

... More
4CX10Sqmm Ar, Al

570

-

-

... More
4CX16Sqmm Ar, Al

1525

-

-

... More
4CX25Sqmm Ar, Al

205

-

-

... More
4CX4Sqmm Ar, Cu

235

-

-

... More
4CX4Sqmm Un.Ar, Cu

15

-

-

... More
7D. CABLE TRAYS

-

-

-

... More
Supply, installation of Perforated hot dipped galvanised double bended cable trays from 2mm thick GI sheets continously connected including horizontal and vertical bends, reducers, tees and other acessories and duly suspended from the ceiling with 1 mm dia vertical GI rods supported by 40mmx40 mm 5mm GI angle etc, Complete as per specifications are required and as below.

-

-

-

... More
50 mm x 50 mm x 1.6 mm

313

-

-

... More
300 mm x 50 mm x 1.6 mm

47

-

-

... More
Supply, installation, testing and commissioning of MS ladder type cable trays fabricated out of MS structural steel members with necessary cross arms, couplers, bends and all other fixing accessories, angles, supporting structures etc duly painted. The rungs shall be at the interval of 300mm and the supports at the interval of 1000 mm. The supports are required at one side for the trays upto size of 750 mm wide and both sides for trays of 1000mm and above. The height of the cable trays shall be 70m

-

-

-

... More
150 mm Ladder type

450

-

-

... More
300 mm Ladder type

20

-

-

... More
450 mm Ladder type

100

-

-

... More
600 mm Ladder type

163

-

-

... More
MS structural steel for cable tray supports (ISMC75)

6

-

-

... More
8. EARTHING SYSTEM

-

-

-

... More
EARTH PIT

-

-

-

... More
Earthing with G.I. earth pipe 4.5 m long x 40 mm dia. including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with Charcoal and salt as required.

10

-

-

... More
Earthing with copper plate 600 mm X 600 mm X 3 mm thick including accessories and providing masonory enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

10

-

-

... More
Supply, Installation, testing and commissioning of following sizes of Chemically treated earth electrode as per IEC. The rate shall be for complete work like vertical rod, chemical compound shall be with resistivity of 0.2ohm meter as per IEEE80, excavation, ramming, consolidation, brick work chamber, cover slab etc. The earth station to be treated to obtain individual earth resistance as per requirements of local authorities. Separate drawings shall be furnished by the contractor for technical approval. (Make: Potential maintenance free electrodes, JEF Techno)

-

-

-

... More
17.2dia, 3meters long, 100 micron, Cu bonded steel electrode with all required accessories as per norms

4

-

-

... More
25dia, 3meters long, 100 micron, Cu bonded steel electrode with all required accessories as per norms

4

-

-

... More
32dia, 3meters long, 100 micron, Cu bonded steel electrode with all required accessories as per norms.

1

-

-

... More
GI CONDUCTORS

-

-

-

... More
Providing and fixing 25 x 5 mm GI strip on surface or in recess for connections etc. as required.

10

-

-

... More
50X6 mm GI earth flat

706

-

-

... More
50X6 mm (750mm length) GI earth bus

10

-

-

... More
COPPER CONDUCTORS

-

-

-

... More
Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required

10

-

-

... More
8SWG wire

104

-

-

... More
Gland earth Cu plate & wire

10

-

-

... More
750X50X6 mm Cu earth bus

10

-

-

... More
STRUCTURAL EARTHING

-

-

-

... More
TNS-PME INTEGRATED EARTHING SYSTEM CONFORMING TO NEC 2023, IS 732, IS 3043, NBC-2016 ,IEC 60364-5-54 & IS/IEC 62305-3 VENDOR: CAPE ELECTRIC

1

-

-

... More
9. DATA/VOICE/TV SYSTEM/CCTV

-

-

-

... More
Supplying and fixing the following modular switch/ socket, modular plate & switch box including connections etc. as required.

-

-

-

... More
RJ 11 Voice Telephone socket outlet

10

-

-

... More
Aruba access point

60

-

-

... More
TV antenna socket outlet

10

-

-

... More
Supply, installation, testing and commissioning of CCTV (Closed Circuit Television) system based on the following components including connecting leads, connectors, jumpers, nuts, screws, bolts, mounting plates, cover plates, back boxes etc and as required to make the system complete and operational in all respects complete as per specifications, drawings, standards and as required

-

-

-

... More
Network dome camera, it shall be IR Indoor type 1/2.8 inch CMOS progressive scan imager 2.7 to 13.5mm, F1.4 to F2.8 2 MP (1920 x 1080) to 5MP (2592 x 1944) make honeywell or equivalent

62

-

-

... More
Network bullet camera, it shall be IR outdoor type 1by3 inch CMOS 1point 3 MP 2point8 mm Fixed 12 IR LEDs PoE Hpoint264, make honeywell or equivalent

6

-

-

... More
Video balloon

68

-

-

... More
Supply and installation of following Ports 32 Channel NVR complete with all connected accessories etc., as required.

3

-

-

... More
Installation, testing and commissioning including all fixing accessories, clamps, inter connecting wiring, necessary software and integration devices etc, in the control room between equipments like DVR/Monitor using CAT 6 cable or other communication cables as required.

1

-

-

... More
Supplying and drawing of UTP 4 pair CAT 6A LAN cable in the existing surface /recessed Steel/PVC conduit as required. (6400 Mtrs)

-

-

-

... More
1 run cable

4072

-

-

... More
2 run cable

1221

-

-

... More
3 run cable

1221

-

-

... More
Supply and installation of 8 Ports Network Switch complete with all connected accessories etc., as required. (POE)

1

-

-

... More
Supply and installation of 16 Ports Network Switch complete with all connected accessories etc., as required. (POE)

3

-

-

... More
Supply and installation of 24 Ports 10/1000/Mbps speed Net work Switch complete with all connected accessories etc., as required.

2

-

-

... More
Supplying, installation, testing and commissioning of 6U rack, with one horizontal power manager, one horizontal wire manager and with all connected accessories complete., as required

1

-

-

... More
Supplying and drawing of 2 core Flexible Fiber optic cable in the existing surface/ recessed Steel/ PVC conduit as required.

10

-

-

... More
Supply and laying of following sizes of PVC conduit to be concealed in slab / wall / surface mounted with necessary accessories like bends, couplers etc. The rate shall include required civil works, junction boxes of suitable sizes at regular intervals.

-

-

-

... More
20mm dia 2 mm thick PVC conduit

3661

-

-

... More
25mm dia 2 mm thick PVC conduit

611

-

-

... More
32mm dia 2 mm thick PVC conduit

611

-

-

... More
20mm dia 1.6 mm thick MS conduit

611

-

-

... More
25mm dia 1.6 mm thick MS conduit

611

-

-

... More
32mm dia 1.6 mm thick MS conduit

611

-

-

... More
Supplying and fixing of 80 mm x 50 mm PVC Cable management trunking system including accessories such as joints, Internal Angle, External Angle, Flat Angle, End Cap, cable retainers as required.

300

-

-

... More
10. RACE WAY

-

-

-

... More
10A. Floor Trunking

-

-

-

... More
Supply & laying of Aluminium raceway for following sizes embedded inthe floor with minimum 3mm thick cover and including trunking accessories like bends, tees, joints, couplers, flanges, etc., required for the installation to form acomplete cable distribution system. Trunking shall be located after correctly marking the routing in the floor as per drawings. This is inclusive of screed cutting.

-

-

-

... More
150mm wide 38mm depth

25

-

-

... More
100mm wide 38mm depth

85

-

-

... More
50mm wide 38mm depth

30

-

-

... More
10B. Junction Box

-

-

-

... More
Supply & laying of 2mm thick heavy gauge galvanized sheet steel junction box embedded inthe floor with minimum 3mm thick G.I cover. At strategically locations the Junction Boxes shall be located. The item shall include all implied and allied accessories /items required for complete distribution system. This is inclusive of screed cutting.

-

-

-

... More
150X150X60-75mm depth

24

-

-

... More
300X300X60-75mm depth

10

-

-

... More
11. SAFETY ITEMS

-

-

-

... More
Supply and installation of the following equipments.

-

-

-

... More
12 mm thick 900mm width Non skid rubber mat for 1.1KV grade

140

-

-

... More
Sand bucket painted red & approved quality with MS stand to fix 4 buckets (1sets of 4 buckets).

6

-

-

... More
Danger plates 440 volts written in two languages.

6

-

-

... More
Carbon dioxide fire extinguisher type 4.5 kg capacity.

6

-

-

... More
Standard first aid box kit.

2

-

-

... More
Shock treatment chart written in two languages.

6

-

-

... More
Hand gloves suitable for 415 V

2

-

-



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements

Past Bidders
This list is curated from the bidders of the similar tenders in the past

Unlock the Tender details for free
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
Combined ShapeCreated with Sketch.Sign In
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.
TENDER BY COUNTRIES
View All
United States Tenders|
United Kingdom Tenders|
Spain Tenders|
France Tenders|
Qatar Tenders|
Australia Tenders|
Canada Tenders|
China Tenders|
Malaysia Tenders|
Maldives Tenders|
Singapore Tenders|
Bangladesh Tenders|
Ethiopia Tenders|
Bhutan Tenders|
Kuwait Tenders|
Oman Tenders|
Germany Tenders|
Egypt Tenders|
Ghana Tenders|
Saudi Arabia Tenders
TENDER BY AUTHORITIES
View All
Federal Road Agency Tenders|
Bangladesh Railway Tenders|
Area Metropolitana De Barcelona Tenders|
Jsc Russian Railways Tenders|
Kuwait Oil Company Tenders|
Civil Aviation Authority Tenders|
Food And Agriculture Org. Tenders|
Eskom Tenders|
Energy Regulation Commision Tenders|
Dept Of Defence Tenders
TENDER BY CATEGORIES
View All
Agriculture Or Forestry Works Tenders|
Automobiles And Auto Parts Tenders|
Civil And Construction Tenders|
Consultancy Services Tenders|
Education And Training Services Tenders|
Electrical And Electronics Tenders|
Finance And Insurance Sectors Tenders|
Food Products Tenders|
Furnitures And Fixtures Tenders|
Healthcare And Medicine Tenders
TENDER BY PROCUREMENT
Goods Tenders|
Works Tenders|
Services Tenders
OFG MANUFACTURING BUSINESSES PRIVATE LIMITED
  • Head Office
    6th Floor, Global Business Park, Tower A, Besides Guru Dronacharya Metro Station, Gurugram, Haryana - 122002, India
  • Sales Office
    B - 705 & 706, Sankalp Iconic Tower, Opp. Vikramnagar Colony, Iscon Cross Road, S. G. Highway, Ahmedabad - 380054, India
COMPANY
POLICIES
SUPPORT
MOBILE APPS
© Powered by OFG MANUFACTURING BUSINESSES PRIVATE LIMITED, All Rights Reserved