Indian Institute Of Information Technology Tender

Supplying, installation, testing and commissioning of floor mounted indoor type cubicle panel of size not less than 2.1 m (H) x 1 m (W) x 0.3 m (D) made out of 2 mm thick CRCA sheet for frame work and covers, compartmentalised, dust and vermin proof, hinged doors with knobs 3 mm thick gland plate i/c cleaning and finishing with 7 tank process for powder coating in approved shade, 630 amps capacity TPN aluminium bus bars of high conductivity and all connection to individual circuits from the bus bar shall prefebly be solid connections, DMC/ SMC bus bar supports and necessary cable supports for clamping the cable in the cable alley, PVC sleeves or insulated in approved manner for all connections and bus bar, bottom base channel of ISMC 100 x 50 mm (9.2 Kg/m), G.I earth bar of size 50 mm x 6 mm at the rear for the entire width of the panel with 2 Nos. earth studs, connections from bus bar to switchgear and control wiring with required size FRLS PVC insulated copper conductor cable of suitable size, cable alley, separate gland plate for each cable entry 3mm thick gland plates including providing and fixing the following switchgear, as per attached technical specifications, as required. SDB -1

Providing and Installing of Acoustical micro look edge 600x600mm and 15 mm thickness, easily demountable tile, Option of weekly dusting, vacuum cleaning, manufactured from High density glass wool utilizing the 3RD Technology, visible surface is a batch painted glass tissue in white, back of the tile covered with glass tissue. 83% light reflectance. Tiles classified under sound absorption class A with "alpha w " value of 0.95 at minimum 200mm o.d.s. Sound absorption test results measured according to EN ISO 354 and classification according to EN ISO 11654 and the single value rating for NRC value - 0.9 according to ASTM C 423 . Tiles should have white colour " White 500 " nearest NCS colour sample S 0500 - N with tiles withstand a permanent ambient RH up to 95% at 30 degree C without sagging , warping and delaminating ( ISO 4611).Ceiling is consist of Axiom profile for hanging effect wherever required. Axioms channels 50mm mm wide face with 19.3mm(+/-0.50mm) horizontal legs, straight sections with special bosses formed for attachment to the Axiom tee-bar connection clip or hanging clip, extruded Aluminum, factory finished (minimum 34-50 microns factory - applied baked polyester paint). These are Aluminum Extrusions formed with distinct architectural detail groove on top and bottom flanges and special bosses to receive the tee bar connection clips and splice plates, to provide positive mechanical lock with no visible fasteners. Hang the sections of Axiom Trim onto the grid system by engaging the top ear of the connection clip under the boss of the channel trim. Slide the lower leg downward to engage the lower boss on the trim and secure by tightening the locking screw.

Same as above but extra for using flamed finished granite