Hindustan Shipyard Limited Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Hindustan Shipyard Limited - HSL Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date25 Jan 2024
Closing Date13 Mar 2024
Tender Amount₹ 11,00,00,000
Costs
EMD
₹ 22,00,000Document Cost
₹ 1,770Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_HSL_94169_1Tender No
CD/OS/YP/1501/BLASTING and PAINTING/2024Tender Authority
Hindustan Shipyard Limited ViewPurchaser Address
-Website
http://https://www.hslvizag.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m including cost and conveyance of all materials,labour charges,lead,lift etc complete at all levels as per direction of Engineer-in- charge.
591
-
-
Filling available excavated earth(excluding rock) in trenches, under floors,plinth,sides of foundation,in areas etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering,lead upto 50m and lift upto 1.5m including cost and conveyance of all materials,labour charges, etc complete at all levels as directed by the Engineer-in-Charge
696
-
-
Soling with soling stone of size 150 to 75 mm brokenstone and binding materials, including hand packing and wedging them tightly so that the whole is formed as a solid mass, spreading binding material in 12mm thick layers and sweeping the same to fill the voids,watering profusely and consolidating with hand rammer/ plate vibrator etc complete as per the direction of Engineer-in - Charge.
274
-
-
Disposal/ Stacking of surplus excavated earth / rock/ building rubbish / malba / similar unserviceable,dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in charge, beyond 50 m initial lead, for all leads including all lifts involved.
571
-
-
Pile work
-
-
-
Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M-35 of specified diameter and length below pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of concrete
,boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by Crawler mounted, telescopic boom hydraulic pilling Rig all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap).
Note:Truck Mounted rotary/TMR/Tube well boring machine shall not be used.
-
-
-
600 mm dia piles
1362
-
-
(SH: - 2.0 - CONCRETE WORK)
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone
aggregate 40 mm nominal size derived from natural sources)
233
-
-
1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
61
-
-
(SH: - 3.0 - R.C.C. WORK)
-
-
-
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources,Portland Cement (OPC-43 Grade) admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
All works upto plinth level
Concrete of M30 grade with minimum cement content of 350 kg /cum
(Note :- Minimum Cement content considered in this item is @ 350 kg/cum. Additional cement requirement as per mix design shall be considered by the bidder while quoting, nothing extra shall be paid on this account) .
462
-
-
Providing Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding with 16 gauge GI binding wire etc complete including cost, conveyance, lead, lift of all materials for all types of RCC works as per drawing/specification and as directed by Engineer-in-Charge.
-
-
-
Upto plinth level.(All slipway slab and other work upto HPL shall be measured in this item) Thermo-Mechanically Treated bars of grade Fe-500D or more.
111132
-
-
Foundations, footings, bases of columns etc. for mass concrete.
554
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
546
-
-
(SH: - 4.0 - STEEL WORK )
-
-
-
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position all complete. as directed by Engineer- in-Charge at all levels.
26260
-
-
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position using structural steel etc. as required.
-
-
-
In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete
12712
-
-
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
7372
-
-
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes
5444
-
-
Providing and fixing M.S round holding down bolts with nuts and washer plate including cost and conveyance of all materials, labour charges,lead,lift etc complete as directed by Engineer in-Charge
9996
-
-
(SH: - 5.0 - ROOFING AND CLADDING WORKS)
-
-
-
Design,vetting by IIT / NIT / Andhra University, material, fabrication, supply, erection, transportation, labour, supervision of Pre Engineered superstructure and cladding as per drawing including all primary members, secondary members, roof & wall sheeting, canopy as per drawing fasteners, sealer/rope sealer, closures/filler stripes, ridge cap, flashing and trim, eave gutters and downspouts, anchor bolts, ventilators and Turbo ventilators,provision and support for hang up doors etc.painting with marine anticorrossive painting/coating etc complete as per the drawing and as directed by the Engineer-in-charge with the following specification at all levels. Unless specified all work shall conform to the latest Indian Standards. Building type: Clear Span (CS) as per drawing.Building height: As per drawing Building slope: as per drawing Type of End Frame: Post & Beam Design codes- IS 800- 2007, IS 875 (Part 3 Wind load) 1987, IS 801- 1975, IS 1893:2002, AWS D1.1.96, D1.1-2004 .
Roofing & cladding sheet: Galvanised iron profile sheet .
The rate quoted for PEB shall be inclusive of all super structure work as per drawing above the existing foundation. Plinth area ( along the outer edge line of the columns )of the building only shall be measured for payment.
2060
-
-
Providing and fixing Vertically Lifting Fabric Hoist Up Door of size 16.5mx12m in Single Leaf CE Certified As Per European Standard
BS EN 13241-1:2003+A1.2011 Push Button - 1 No
Double curtain-900 GSM, Wireless Safety Edge Sensor - 1 No.including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer in-Charge at all levels.
2
-
-
(SH: - 6.0 - FINISHING WORK)
-
-
-
Providing and applying anticorrosive protective coating on external steel structures – A high performance passivation enhanced epoxy primer having Minimum of volume solids 75% and DFT (Dry Film Thickness) of 75 microns followed by a two component epoxy High Build intermediate MIO, having 80% volume solids and DFT of 150 microns and thereafter top coated with a two component high solids acrylic Polyurethane having Min 50 % volume solids and DFT of 60 microns. Total thickness of minimum 285 Microns or as per manufacturer recommendation. All steel surfaces shall be abrasive blast cleaned to Sa 2.5 (ISO8501- 1:1988) or SSPC- SP10 with suitable abrasive Grid/shot. If oxidation has occurred between blasting and paint application, the surface should re-blasted to the specified visual standard. Any surface defects revealed by the blast cleaning process should be filled/ ground or treated suitably. Before blasting, surfaces shall be washed and cleaned by water jet/ Solvent to remove surface contamination/ grease etc.. The rate Including cost and conveyance of all materials , labour charges, lead, lift etc at all heights complete as directed by Engineer in charge.
1854
-
-
PART II - ELECTRICAL WORKS
-
-
-
PART A - LT PANELS : POWER PANEL - PAINTING BOOTH
-
-
-
Design, Supply , Installation, Testing & Commissioning of LT Switch board cubicle type compartmentalised (form 4), made out of 2mm thick CRCA sheet, totally enclosed, IP55, free standing, pedestal mounting, dust and vermin proof, powder coated, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including all the necessay internal wiring , with suitable size HFFR wires/cable, interconnection, duly powder coated with seven tank process etc.The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specification.
Incomer
1250A, Four pole, 50kA, Electrical Draw Out type ACB with Microprocessor based adjustable over current and earth fault release, RS 485 communication facility- 1 Nos.
Instruments
4A C curve SP MCB, Ammeters, Voltmeters, Selector Switches,Multifunction Meters, Power analyser meter, Indication Lamps, CTs, Protection Relays, interlocks,etc as per SLD . (Meters
Busbar
TPN busbar chamber with Aluminium busbar suitable for 1250 A
Surge Protection Devices
Pluggable type surge arrester Type 1 as per IEC 61643 (IP 20) with inbuilt indication -1 set
Out goings
200A, TP + NL MCCB microprocessor based release for OL & SC protection (Ics = 100% Icu
= 50kA) and neutral link - 4Nos
400A, TP + NL MCCB microprocessor based release for OL & SC protection (Ics = 100% Icu
= 50kA) and neutral link - 2 Nos
125A, TP + NL MCCB microprocessor based release for OL & SC protection (Ics = 100% Icu
= 50kA) and neutral link - 2 Nos
ON-OFF -TRIP indication lamp - As per SLD
The panel shall be with top/bottom entry to receive incoming & outgoing cable all necessary interconnection & accessories as per particular specification & single line diagram.
-
-
-
Supply
1
-
-
Installation, Testing & Commissioning
1
-
-
Ventilation Fan VFD Panel 1&2
-
-
-
Design, Supply, Installation, Testing & Commissioning of Ventilation Fan VFD Panel, cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP55, free standing, pedestal mounting, dust and vermin proof, powder coated, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreader etc. The panel shall be OEM Make or type tested Panel manufacturer as per IEC 61439-1&2 with all accessories as per drawing & specification.
Incomer
400A, FP, SDU-1 No.
Instruments
"4A C curve SP MCB, Ammeters, Voltmeters, Selector Switches,Multifunction Meters, Power
analyser meter, Indication Lamps, CTs, Protection Relays, interlocks,etc as per SLD . (Meters with caliberation certificates valid for 1 year)"
Busbar
400A TPN busbar chamber with Aluminium busbar.
Outgoing
"63A, TP+NL, 35kA, MCCB with Thermal Magnetic release, Ics=Icu, having adjustable over
load, short circuit protection. -15Nos"
Heavy duty VFD drive for 3 phase, 50Hz ventilation fan of 9.3kW capacity with ON, OFF push button, ON, OFF, Trip LED indication lamp,necessary protection system etc. -12 Nos
-
-
-
Supply
1
-
-
Installation, Testing & Commissioning
1
-
-
Overhauling,tesing & commensioning of 1 No.750kVA Distribution transformer in substation-2 as per specifications enclosed. This includes filtering of transformer oil.
1
-
-
Retrofitting of LT panels in substation-2 including supply& installation of new 1 No 1250A ACB as per specification enlosed.
1
-
-
PART-B CABLES AND CABLING
-
-
-
SUPPLY
Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium
/copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
-
-
-
3.5C 400 Sq.mm Al
920
-
-
3.5C 240 Sq.mm Al
920
-
-
4C 35 Sq.mm Al
360
-
-
4C 16 Sq.mm Al
1008
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1
-
-
-
3.5C 400 Sq.mm Al- Supply
10
-
-
3.5C 400 Sq.mm Al- Installation
10
-
-
3.5C 240 Sq.mm Al-Supply
18
-
-
3.5C 240 Sq.mm Al-Installation
18
-
-
4C 35 Sq.mm Al-Supply
4
-
-
4C 35 Sq.mm Al-Installation
4
-
-
4C 16 Sq.mm Al- Supply
12
-
-
4C 16 Sq.mm Al-Installation
12
-
-
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1
KV grade of following size on wall or surface as required.
-
-
-
Upto 35 sq. mm (clamped with 1mm thick saddle)
200
-
-
Above 185 sq. mm and upto 500 sq. mm (clamped with 40x3mm MS flat clamp)
340
-
-
Laying of one number PVC insulated and PVC sheathed armoured power cable of 1.1kV grade fo the following sizes in ground including excavation ,sand cushioning , providing protective covering and refilling the trench etc. as required
-
-
-
Upto 35 sq. mm
40
-
-
Above 185 sq. mm and upto 500 sq. mm
370
-
-
Laying of one number additional PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation and refilling the trench etc as required, but excluding sand cushioning
and protective covering.
-
-
-
Upto 35 sq. mm
20
-
-
Above 185 sq. mm and upto 500 sq. mm
40
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
-
-
-
Upto 35 sq. mm
80
-
-
Above 185 sq. mm and upto 500 sq. mm
80
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.
-
-
-
Upto 35 sq. mm
20
-
-
Above 185 sq. mm and upto 500 sq. mm
40
-
-
Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on cable tray as required.
-
-
-
Upto 35 sq. mm (clamped with 1mm thick saddle)
650
-
-
Above 185 sq. mm and upto 500 sq. mm (clamped with 40x3mm MS flat clamp)
970
-
-
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required
-
-
-
50 mm-Supply
50
-
-
50 mm-Installation
50
-
-
100 mm-Supply
50
-
-
100 mm-Installation
50
-
-
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.
-
-
-
100 mm dia-Supply
50
-
-
100 mm dia-Installation
50
-
-
300 mm dia-Supply
50
-
-
300 mm dia-Installation
50
-
-
Fabrication, supply and installation of following size of Ladder Type GI cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and fixing in cable trench or surface with supports / duly suspended from the ceiling with M8 threaded rod and all necessery accessories as required
-
-
-
900 MM WIDTH X 75 MM DEPTH X 2 MM THICK-Supply
50
-
-
900 MM WIDTH X 75 MM DEPTH X 2 MM THICK-Installation
50
-
-
600 MM WIDTH X 75 MM DEPTH X 2 MM THICK-Supply
624
-
-
600 MM WIDTH X 75 MM DEPTH X 2 MM THICK-Installation
624
-
-
450 MM WIDTH X 50 MM DEPTH X 2 MM THICK- Supply
336
-
-
450 MM WIDTH X 50 MM DEPTH X 2 MM THICK-Installation
336
-
-
300 MM WIDTH X 50 MM DEPTH X 2 MM THICK- Supply
288
-
-
300 MM WIDTH X 50 MM DEPTH X 2 MM THICK- Installation
288
-
-
150 MM WIDTH X 50 MM DEPTH X 2 MM THICK- Supply
100
-
-
150 MM WIDTH X 50 MM DEPTH X 2 MM THICK- Installation
100
-
-
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, fixing in cable trench or surface with supports / suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
600 MM WIDTH X 50 MM DEPTH X 1.6MM THICK- Supply
50
-
-
600 MM WIDTH X 50 MM DEPTH X 1.6MM THICK- Installation
50
-
-
300 MM WIDTH X 50 MM DEPTH X 1.6MM THICK-Supply
50
-
-
300 MM WIDTH X 50 MM DEPTH X 1.6MM THICK-Installation
50
-
-
150 MM WIDTH X 50 MM DEPTH X 1.6 MM THICK- Supply
50
-
-
150 MM WIDTH X 50 MM DEPTH X 1.6 MM THICK- Installation
50
-
-
Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as
required.
10
-
-
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with
inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and
10
-
-
Supply, fabricating and installing MS items such as Tees/ angles/ channels etc. on floor/ceiling/ wall including necessary civil work such as grouting, finishing etc. and painting with
-
-
-
Supply
200
-
-
Installation
200
-
-
Providing & fixing Fire Barrier mortar with minimum 2 hours fire rating when tested in accordance with BS 476 part 20 and UL 1479 for horizontal openings in fire rated floors or slabs and vertical openings in walls for passing service shafts. The service lines could be of various types like electrical cables trays, metal pipes, GI Ducts for AC, etc.The mortar shall have minimum hardened density of 0.8 g/cm3 and It should have a compressive strength of 2.9N/Sq mm . The product shall be Smoke & Air Seal and 30 years Age tested as per Dafstb and DIBT standards. The product shall be tested and approved by third party agencies such
2.5
-
-
PART- C- WIRING AND ACCESSORIES
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.GROUP C.
20
-
-
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.. (Note:The total distance from the switch box to
4
-
-
Wiring for group controlled (looped) light point/fan point/ exhaust fan point/ call bell point(without independent switch etc.) with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit and earthing the point with 1.5 sq mm
FRLS PVC insulated copper conductor single core cable etc as required.(Note:The total
20
-
-
Circuit wiring -Wiring for circuit/ submain wiring along with earth wire with the following sizes
of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium
-
-
-
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
100
-
-
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
800
-
-
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
200
-
-
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
50
-
-
Supplying and fixing following modular switch/ socket with modular plate & cover on surface or in recess, including proving and fixing suitable size GI box,inter connection etc as required complete.
-
-
-
15/16 amp switch
2
-
-
6 pin 15/16 amp socket outlet
2
-
-
Telephone socket outlet
2
-
-
Bell push
2
-
-
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as
required.
2
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16
15
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential
6
-
-
Supply & fixing Computer points with 3 nos 3 pin 5/6A socket with 2no.5/6A switch with modular front plate and cover on surface/recess, including proving and fixing suitable size GI boxs, its interconnections etc as required complete. (Note: 2 nos 5/6A socket fixed at 60cm
2
-
-
Supply, fixing of Network point, UTP RJ45, CAT 6 modular type socket with modular plate & cover on surface or in recess, including proving and fixing suitable size GI box, inter
2
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in
surface/recess including cutting the wall and making good the same in case of recessed
-
-
-
20 mm
100
-
-
25 mm
100
-
-
32 mm
30
-
-
Supply and fixing following size / Module GI box in surface/ recess etc . As required
-
-
-
1 or 2 Module
12
-
-
PART -D- MCBs AND MCB DISTRIBUTION BOARDS
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but
-
-
-
8 way (8 + 24), Double door- Supply
1
-
-
8 way (8 + 24), Double door- Installation
1
-
-
6 way (8 + 18), Double door- Supply
1
-
-
6 way (8 + 18), Double door- Installation
1
-
-
4 way (8 + 12), Double door- Supply
1
-
-
4 way (8 + 12), Double door- Installation
1
-
-
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as
-
-
-
8 way (8 + 24), Double door- Supply
1
-
-
8 way (8 + 24), Double door- Installation
1
-
-
6 way (8 + 18), Double door- Supply
1
-
-
6 way (8 + 18), Double door- Installation
1
-
-
4 way (8 + 12), Double door- Supply
2
-
-
4 way (8 + 12), Double door- Installation
2
-
-
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But
without MCB/RCCB/Isolator)
-
-
-
12 way, Double door- Supply
2
-
-
12 way, Double door- Installation
2
-
-
Supply and fixing of following rating residual current circuit breaker with MCB having earth leakage and overload protection (RCCB+MCB) as per specification as required
-
-
-
4 pole 40 amps. (415 Volts),30mA sensitivity.-Supply
2
-
-
4 pole 40 amps. (415 Volts),30mA sensitivity.- Installation
2
-
-
4 pole 40 amps. (415 Volts), 100mA sensitivity.- Supply
1
-
-
4 pole 40 amps. (415 Volts), 100mA sensitivity.-Installation
1
-
-
4 pole 25 amps. (415 Volts), 30mA sensitivity-Supply
2
-
-
4 pole 25 amps. (415 Volts), 30mA sensitivity-Installation
2
-
-
2 pole 25 amps. (240 Volts), 30mA sensitivity-Supply
2
-
-
2 pole 25 amps. (240 Volts), 30mA sensitivity-Installation
2
-
-
Supply and fixing of following rating, 10 KA, Miniature Circuit Breakers as required.
-
-
-
6A to 32A, SP, B/C-CURVE- Supply
60
-
-
6A to 32A, SP, B/C-CURVE- Installation
60
-
-
6 A to 32 A TP MCB, C-CURVE- Supply
2
-
-
6 A to 32 A TP MCB, C-CURVE- Installation
2
-
-
6 A to 32 A SP MCB, D-CURVE- Supply
2
-
-
6 A to 32 A SP MCB, D-CURVE-Installation
2
-
-
40-63A FP MCB, C-CURVE-Supply
1
-
-
40-63A FP MCB, C-CURVE- Installation
1
-
-
40-63A TP MCB, C-CURVE- Supply
2
-
-
40-63A TP MCB, C-CURVE- Installation
2
-
-
Supply, Installation, Testing & Commissioning of 63A FP isolator in 1.6mm thick sheet steel enclosure duly painted with powder coated finishing on surface including all the mounting
-
-
-
Supply
2
-
-
Installation, Testing & Commissioning
2
-
-
Supply, Installation, Testing & Commissioning of 40A FP isolator in 1.6mm thick sheet steel
enclosure duly painted with powder coated finishing on surface including all the mounting
-
-
-
Supply
2
-
-
Installation, Testing & Commissioning
2
-
-
Supply, Installation, Testing & Commissioning of 25A DP isolator in 1.6mm thick sheet steel
enclosure duly painted with powder coated finishing on surface including all the mounting
-
-
-
Supply
4
-
-
Installation, Testing & Commissioning
4
-
-
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. As
-
-
-
Supply
20
-
-
Installation
20
-
-
Supply and fixing outdoor type START/STOP (2way) push button station (IP65) including all the necessary accessories as required complete with suitable mounting arrangement.(Cat No
-
-
-
Supply
4
-
-
Installation
4
-
-
Supply installation, testing and commissioning of out door (IP 54 ) DOL starter upto 5HP, 3ph motor including auxiliary contactors, SPP relay , illuminated pushbuttons, provision for remote
operation all the necessary accessories as required complete. The starter enclosure shall be
-
-
-
Supply
4
-
-
Installation, Testing & Commissioning
4
-
-
Supply installation, testing and commissioning of out door (IP 54 ) Full automatic star delta starter for 15 HP, 3ph motor including auxiliary contactors, illuminated pushbuttons, provision
for connecting external pressure switch, and remote operation, etc, all the necessary
-
-
-
Supply
4
-
-
Installation, Testing & Commissioning
4
-
-
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
-
-
-
Supply
2
-
-
Installation, Testing & Commissioning
2
-
-
Supplying and fixing 20 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
-
-
-
Supply
2
-
-
Installation, Testing & Commissioning
2
-
-
Supplying and fixing 30 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 amps "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
-
-
-
Supply
2
-
-
Installation, Testing & Commissioning
2
-
-
PART- E-LIGHT FIXTURES AND FANS
Supply of indoor industrial surface mounted LED tube with Batten along with driver , surge protector,,system wattage of maximum 40Watts,lumen output of luminaire greater than 4000 lumen, power factor 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than
4
-
-
Supply of indoor decorative surface mounted LED Batten with Polycarbonate Diffuser ,along with driver,system wattage of maximum 10 Watts,lumen output of luminaire greater than 1000, power factor 0.9,rated life of L70 @ 25,000 hours, system efficacy greater than 100lumen/watt and including all the necessary accessories as required complete.Make:- Cat No: OSRAM LUXSMART led BATTEN G2 or equivalent approved make
4
-
-
Supply of indoor decorative surface mounted LED Batten with Polycarbonate diffuser, along with driver,system wattage of maximum 18Watts,lumen output of luminaire greater than 2000, power factor 0.9,rated life of L70 @ 25,000 hours, system efficacy greater than 100lumen/watt and including all the necessary accessories as required complete.Make:- Cat No: Osram Luxsmart LED batten G2 or equivalent approved make
4
-
-
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm or sufficient length down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.(Rate shall inclusive of supply and installation of remote/electronic regulator)
-
-
-
Supply
2
-
-
Installation, Testing & Commissioning
2
-
-
Supply of IP66 LED Street Lighting luminaire ,pressure die cast aluminium housing body with optimal heat sink, with system wattage of maximum 30W with rated life of L70 @ 50,000 hours, CRI greater than or equal to 70 & with system lumens greater than 3000 and system efficiency greater than or equal to 90%.The Light fitting shall be with all required accessories
suitable for mounting on the pole arm.The luminaire should have Inbuilt surge protection
10
-
-
Supply of LED Highbay fixture with high pressure die cast aluminium housing,system wattage of maximum 200Watts,lumen output of lamp greater than or equal to 22000 lumens, power factor 0.9,rated life of L70 @ 50,000 hours , minimum system efficacy of
110lumen/watts ,with suitable driver and including all necessary accessories as required
34
-
-
Supply of LED flameproof LED wellglass fixture with high pressure die cast aluminium housing with heat resistant toughened glass,system wattage of maximum 30Watts,lumen output of lamp greater than or equal to 3000 lumens, power factor 0.9,rated life of L70 @
50,000 hours , minimum system efficacy of 100lumen/watts ,with suitable driver, junction box,
10
-
-
Supply of 250 mm sweep,900 rpm light duty exhaust fan in plastic body with self opening louvers working on 230 V AC supply complete with all accessories as required. (Make: Orient
Smart Air Exhaust or equivalant approved make)
2
-
-
Supply of 450mm sweep heavy duty exhaust fan in die cast aluminium with self opening louvers working on 230 V AC supply complete with all accessories as required. (Make:
4
-
-
Supply of 400 mm size wall fan having speed control, oscillation control at bottom and suitable for operation on single phase 230 volt, 50Hz AC supply complete with continuous duty motor and all accessories as required complete. (Make: Orient Snow Fall or equivalant
approved make)
2
-
-
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and
earthing etc. as required.
12
-
-
Installation, testing and commissioning of exhaust fan upto 450mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the
damage, connections, testing & commissioning etc as required.
6
-
-
Installation, testing and commissioning of LED type fittings on wall/Column/truss/false ceiling/slab of height 25m and above using 25mm heavy duty GI conduit of thickness 1.6mm (TATA, Jindal or equivalent) with GI clamps , adequate structural sections, antifall arrangement with 2mm PVC coated GI wire rope,necessay drilling only (without gas cutting) having the holes deburred or rounded using rubber grommets, spacers with 20mm long x ID
12 mm x OD 18mm,cotter pin, Stainless Steel nuts bolts and washers etc for a length of 1mtr
34
-
-
Providing and fixing extra 25mm heavy duty GI conduit of thickness 1.6mm ( TATA, JIndal or equivalent) for a length of 1mtr and wiring with 3C 2.5 Sq.mm PVC insulated flexible copper
102
-
-
Installation, testing and commissioning of High bay/Mid bay/LED/ FLOOD type fittings on wall/Column/truss/false ceiling using suitable MS clamps, nuts, bolts/ 20mm heavy duty GI chain/ pipe (upto 50cm)etc including connections with 3C 2.5 Sq.mm PVC insulated flexible
copper conductor cable as required.
20
-
-
Installation, testing and commissioning of wall fan, including wiring with 3 core 1.5 sqmm FRLS PVC insulated flexible copper conductor as required.including providing and fixing
2
-
-
Numbering of ceiling fan / exhaust fan/ fluorescent fitting as required.
76
-
-
PART -F- EARTHING AND SAFETY EQUIPMENTS
Earthing with C.I. earth pipe 3 metre long, 100 mm dia including accessories, and providing masonry enclosure with heavy duty CI cover plate of 300X300mm having locking arrangement and watering pipe etc. with 64kg charcoal/ coke and 5kg salt as required. (As per IS 3043 ammended uptodate)
4
-
-
Providing and fixing GI/Cu strip/wire on surface or in recess for connections etc. as required.
-
-
-
50mm X10mm GI
320
-
-
25mm X 6mm GI
160
-
-
3.15mm Cu (10 SWG)
958
-
-
Supplying and laying G.I/Copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
-
-
-
50mm X10mm GI
100
-
-
25mm X 6mm GI
50
-
-
3.15mm Cu (10 SWG)
50
-
-
Supply and fixing of of fire retardant/extinguishing electrical insulated synthetic mat of 2m x 1m x 2 mm for 440V grade thick, +/- 10% confirming to BIS, meeting requirements of IS standards
(with upto date amendment), suitable for 440V voltage and having minimum width of 1000mm
10
-
-
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at
least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
4
-
-
PART III- VENTILATION SYSTEM
-
-
-
Supply, Installation, testing and commissioning of 12500 CFM- 75 mm of WC External static pressure Extract Fans vane axial tube with with suitable capacity blower and Variable Frequency Drive (VFD), Motor shall confirm to IE3 series of energy efficient motors with IP55 degree of protection,with Class H insulation (300 DegC for 2 hrs), starter, pre filter section containing washable synthetic type air filters having extruded aluminium frame, other accessories etc. complete in all respects as required by the technical specifications.
10
-
-
Supply , Installation, testing and commissioning of 12500 CFM-75mm of WC external static pressure cabinet fans centrifugal type(duct mounted) withsuitable capacity blower and Variable Frequency Drive (VFD), Motor shall confirm to IE3 series of energy efficient motors with IP55 degree of protection,with Class H insulation (300 DegC for 2 hrs), starter, pre filter section containing washable synthetic type air filters having extruded aluminium frame, other accessories etc. complete in all respects as required by the technical specifications.
14
-
-
Supply,Installation,Testing and Commissioning of Sound Attenuators to be fixed at the exhaust side of exhaust fans as per the technical specifications complete as required of following dimensions:
800 X 400 X 750 mm
24
-
-
Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows,volume control damper, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Factory fabricated GSS sheet metal rectangular ducting as per IS 655-2006 complete in all respects as per technical specifications
1.25 mm sheet duct 18 G
1400
-
-
Supply, Installation , testing and commissioning of Aluminium extruded exhaust air louvers with damper,bird screen etc.complete in all respects as per technical specifications.
26
-
-
PART IV- FIRE FIGHTING WORKS
-
-
-
Supply and installation of ABC Stored pressure type Fire Extinguisher, 6 Kgs Capacity, Mono Ammonium Phosphate based Dry Chemical Powder as per IS 14609 with ISI Mark for Fighting ABC Class of Fire, stored Pressure type of Mild steel body pressurized by Nitrogen Gas. The Extinguisher shall have pressure gauge for indicating inside pressure with opening and closing lever of squeeze grip type with tamper proof seal, complete with wall bracket. The Extinguisher should be manufactured strictly as per IS: 15683:2018 with ISI mark.
10
-
-
Supply and installation of ISI marked (IS: 15683:2018), 4.5 Kg capacity Carbon-dioxide extinguisher made of high pressure seamless steel cylinder (CCE marked ) complete with wheel type valve with one meter long braided high pressure discharge hose with all accessories in all respects including initial fill with CO2 gas. complete as required as per the technical specification.
4
-
-
Supply and installation of Modular(Cieling mounted) ABC type extinguisher of 5Kg complete as required with all necessary accessories for successful operation as required as per the technical specification.
4
-
-
Providing and fixing initially fully charged Portable Fire Extinguisher of 25 Kg capacity, trolley mounted, ABC type complete with all accessories and conforming to relevant Indian standards (IS:16018) as required as per the technical specifications.
4
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements