Hindustan Shipyard Limited Tender

Disposal of unserviceable material like debris, demolished materials, excavated earth, rubbish, waste materials, removed small tree branches etc., out side the HSL premises to private dumping yard (not to dump in HSL colony dumping area & surrounding areas) it is the resposibility of the firm to ensure no objection shall be raised by municipal authorities / from any body. If any dispute arises the agency has to sort out at their own risk etc.

Cutting and removal existing MS hand rail, wooden supports, removing of galvalume sheets and removing the Iron post in shed etc., and handover the useful materials to YCM dept., stores etc., complete all as directed.

Earth work excavation in all kinds of soil in foundations by mechanical means / manual means including getting out the excavated soil and disposal of surplus excavated soils as directed

Providing water proof MS / Wooden centering and shuttering including strutting, propping for lintels and slabs and whereever specified etc., including removal of form work complete etc., complete

Providing plain cement concrete 1:2:4 nominal mix using 20 mm graded crushed granite aggregate including mixing, depositing in position, tampering, finishing, curing including all materials & labbour in flooring and top of roof level for fixing of wooden members and levelling course etc., complete all as directed.

Providing and laying reinforced cement concrete work in design mix of M25 grade in foundations, beams, columns, waist slab, sunshades etc. wherever required. (Design mix should be submitted by vendor at the time of execution with laboratary report) excluding the cost of centering, shuttering and reinforcement but including cost of Cement (OPC 53 Grade-UltraTech, ACC, Nagarjuna & KCP) and all other materials & men etc., complete

Supply and providing HYSD bar reinforcement of Fe-500 grade of approved make SAIL / RINL / TISCO including transportation, straightning, cutting, bending and binding with annealed binding wire of 18 gauge (1.22mm dia) complete all labour and material etc., complete all as directed

Filling available earth (excluding rock) in trenches, plinth sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Brick work with common burnt clay FPS (Non-modular) bricks of class designation 7.5 in steps and superstructure above plinth level upto floor V level in all shapes and sizes in CM (1:4) incuding all materials and manpower etc., complete all as directed

Providing 15 mm thick plaster with CM (1:4) to walls at all heights, lintel soffits, chajjas, projections, narrow bands, widths, new wall surfaces, concrete surfaces and where ever required etc., including cost of Cement (PPC-Ramco, ACC, Ultratech, Nagarjuna & Jaypee) and all materials, tools, plant and labour, scaffolding arrangements and curing all as per specifications and directions of the engineer.

Providing and fixing 1st quality matt finished vitrified outdoor tile flooring to steps in treads and rises of approved make SOMANI / KAJARIA / CERA /JOHNSON in all colours and shades, laid on 20mm thick cement mortar 1:4 including pointing the joints with white cement and matching pigments etc.,, includes the cost of Cement (PPC-Ramco, ACC, Ultratech, Nagarjuna & Jaypee) etc., complete all as directed.

Providing and fixing stainless steel (Heavy Grade ) hand railing made of Hollow tubes, etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., complete all as directed.

Applying two coats of putty of approved brands Birla / JK to new wall & concrete surfaces at all heights including applying suitable primer including necessary scaffolding and staging where ever required. Putty shall be finished till a smooth and even surface is achieved etc., complete all as directed.

Apply two coats of premium quality weather proofing arcylic Exterior emulsion paint over a one coat of primer, reqired shade to wall surfaces from approved brands Asian paints (apex ultima), Berger (All guard) where ever specified by Engineer including necessary scaffolding etc., complete.

Drilling of 12mm to 20 mm dia,200mm deep holes into the stone masonry wall/RCC structures/ slab etc., using mechanically operated hammer drilled diamond core cutting machine including grouting LOCK FIX or FOSROC make or its equivalent comlete all as directed.

Removing olf existing grills and refixing the same as per the requirement of HSL at specificied locations including modification of existing windows into required size and shape, manpower and welding & gas cutting equipment and consumables etc., complete all as directed.

Providing and fixing anodized extruded aluminium sliding windows and single shutter doors with locking arrangements in two track including frames of approved colour & make. Aluminium sections shall be powder coated with approved colour including aluminium frame conforming to IS:1948, IS:1949 fabricated from extruded sections of INDAL / JINDAL or approved equivalent make having minimum 2mm wall thickness for windows & ventilators as per IS:1285, IS:733 and electro color coating of 15 microns thickness. Glazing shall be frosted float glass of 5.5mm thickness of approved make SaintGobin / Modifloat including sanp fit type beading, concealed screws, fixtures, lokcing arrangement for windows, C.P.brass / staineless steel screws, providing and fixing hinges / pivots, and making provisions for fixing of fittings where ever required including cost of PVC / neoprene gasket fits all complete with necessary filling up of gaps at the junctions, at top, bottom and sides etc., complete. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required.

Re-routing the existing existing electrical cables as per the directions of Plant Maint. Electrical Engineer without damaging the Enroute of Electrical cables at ground level

Supply of 110 mm / 4 Inch dia UPVC(SWR) rain water downtake pipes (supreme/ prince make) conforming to IS : 13592 Type A, jointing with seal ring conforming to IS : 5382, including fixing of clamps, bends, shoes and required drain traps/ filters at roof level to arrest the leaves etc. complete

Note:- 1) The useful materials obtained during progress of work shall be handed over to Yard Civil Maintenance Department / Disposal Section unless otherwise specified/indicated. 2) The bidders/firms have to check the site conditions prior quoting for the tender. 3) All materials & labour including scaffolding materials are in contractors scope and applicable to all the schedule items, unless otherwise specified in that item. 4) All dismantlled and unuseful materials/building rubbish / waste sludge etc., shall be disposed out of premises of Yard duly following GVMC rules/norms.