Eastern Power Distribution Company Of Andhra Pradesh Limited Tender
... More
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Eastern Power Distribution Company Of Andhra Pradesh Limited - APEPDCL Tender
Civil And Construction
Building Construction
Opening Date7 Mar 2025
Closing Date28 Mar 2025
Tender Amount₹ 5,57,11,326
Costs
EMD
₹ 13,32,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
788864Tender No
CGM/OCS & Civil/APEPDCL/VSP/Civil/12/2024-25Tender Authority
Eastern Power Distribution Company Of Andhra Pradesh Limited ViewPurchaser Address
-Website
http://https://www.apeasternpower.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixer including cost and conveyance of all materials and all labour charges complete. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
75
5522
414217.5
... More
Supplying, cutting and placing HYSD bar reinforcement as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded including cost and conveyance of all materials to site and all labour charges complete.
75
95680
7176057.75
... More
Providing Pre construction Anti termite is a process in which 1. chemical toxic to subterranean termites is apply/ inject into soil during early stage of building Construction
2. Treatement of soil Beneath the building and around the foundations conduct and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entryImidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the colums , plinth beams (Back filling) walls and floor junction, external perimeters, along reatining wall @ 5.0 Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500mm around coulmns & 300mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for sparying, rodding etc. complete for furnished item of work as per the approval of the Engineer-in-charge
600
203
122022
... More
Brick Masonry in CM (1:5) with Fly ash cement/lime solid blocks with compressive strength of 75 kg/sq.cm - IS:12894-1990 - CLASS - 7.5 - 290 x 200 x 140 mm including seignorage charges including cost and conveyance of all materials to site and all labour charges complete. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
28.6
7052
201711.51
... More
Augoring and boring of 375mm dia holes in site Bored cast-in-situ R.C.C. Piles with R.C.C. M-20, Nominal Mix (1:1.5:3) using 20mm size aggregate for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils as per IS 2911 - 1980 and as per approved designs including cost and conveyance of all materials to site excluding cost of steel and including all operations, incidental, labour charges, hire charges of machinery, augor bore drill and shell equipment, etc, complete for all depths and for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
784
1717
1346331.84
... More
Under reaming for Bored cast-in-situ R.C.C. Piles of 375mm dia with R.C.C. M-20, Nominal Mix (1:1.5:3) using 20mm size aggregate for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils as per IS 2911 - 1980 and as per approved designs including cost and conveyance of all materials to site excluding cost of steel including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
196
2630
515574.08
... More
Augoring and boring of 300mm dia holes in site Bored cast-in-situ R.C.C. Piles with R.C.C. M-20, Nominal Mix (1:1.5:3) using 20mm size aggregate for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils as per IS 2911 - 1980 and as per approved designs including cost and conveyance of all materials to site excluding cost of steel and including all operations, incidental, labour charges, hire charges of machinery, augor bore drill and shell equipment, etc, complete for all depths and for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
81
1220
98882.37
... More
Under reaming for Bored cast-in-situ R.C.C. Piles of 300mm dia with R.C.C. M-20, Nominal Mix (1:1.5:3) using 20mm size aggregate for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils as per IS 2911 - 1980 and as per approved designs including cost and conveyance of all materials to site excluding cost of steel including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work . (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
22
1497
32941.26
... More
PILE CAPS VRCC M- 25 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry g cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering and scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
97.55
12272
1197185.3
... More
PLINTH BEAM VRCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry g cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering and scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
20
14410
288201.8
... More
LINTEL BEAMS - FIRST FLOOR(Cellar Floor) VRCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry g cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering and scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
7
15296
107077.95
... More
LINTEL BEAMS - SECOND FLOOR VRCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry g cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering and scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
8
15570
124563.44
... More
LINTEL BEAMS - THIRD FLOOR VRCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry g cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering and scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
8
15844
126752.16
... More
LINTEL BEAMS - FOURTH FLOOR VRCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry g cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering and scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
8
16117
128940.8
... More
LINTEL BEAMS - FIFTH FLOOR VRCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry g cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering and scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
1
22610
22610.57
... More
COLUMNS- FIRST FLOOR(Cellar Floor) VRCC M- 25 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry g cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering and scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
18
15422
277613.28
... More
COLUMNS- SECOND FLOOR VRCC M- 25 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry g cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering and scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
11
15807
173886.79
... More
COLUMNS- THIRD FLOOR VRCC M- 25 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry g cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering and scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
11
16191
178103.42
... More
COLUMNS- FOURTH FLOOR VRCC M- 25 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry g cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering and scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
11
16576
182337.65
... More
COLUMNS- FIFTH FLOOR -TERRACE VRCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry g cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering and scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
6
16959
101756.94
... More
SUNSHADES - FIRST FLOOR(Cellar Floor) VRCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry g cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering and scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
90
1533
137970.9
... More
SUNSHADES - SECOND FLOOR VRCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry g cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering and scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
90
1574
141693.3
... More
SUNSHADES - THIRD FLOOR VRCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry g cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering and scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
90
1617
145558.8
... More
SUNSHADES - FOURTH FLOOR VRCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry g cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering and scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
90
1658
149280.3
... More
SUNSHADES - FIFTH FLOOR VRCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry g cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering and scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
11
1701
18717.82
... More
ROOF BEAMS - FIRST FLOOR(Cellar Floor) VRCC M- 25 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry g cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering and scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
35
13943
488038.95
... More
ROOF BEAMS - SECOND FLOOR VRCC M- 25 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry g cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering and scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
35
14266
499340.1
... More
ROOF BEAMS - THIRD FLOOR VRCC M- 25 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry g cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering and scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
35
14588
510585.6
... More
ROOF BEAMS - FOURTH FLOOR VRCC M- 25 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry g cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering and scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
35
14911
521887.1
... More
ROOF BEAMS - FIFTH FLOOR VRCC M- 25 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry g cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering and scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
8
15233
121871.6
... More
ROOF SLAB - FIRST FLOOR(Cellar Floor) VRCC M- 25 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry g cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering and scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
76
12670
962963.32
... More
ROOF SLAB - SECOND FLOOR VRCC M- 25 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry g cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering and scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
74.4
12925
961625.21
... More
ROOF SLAB - THIRD FLOOR VRCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry g cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering and scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
74.4
13179
980559.26
... More
ROOF SLAB - FOURTH FLOOR VRCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry g cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering and scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
74.4
13434
999494.06
... More
ROOF SLAB - FIFTH FLOOR VRCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry g cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering and scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
14
13688
191639.84
... More
Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
505.99
695
351784.49
... More
Brick Masonry in CM (1:6) with 2nd class Bricks traditional size 23 x 11 x 7 cms including cost and conveyance of all materials to site and all labour charges complete-FIRST FLOOR(Cellar Floor) (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
111
9139
1014475.62
... More
Brick Masonry in CM (1:6) with 2nd class Bricks traditional size 23 x 11 x 7 cms including cost and conveyance of all materials to site and all labour charges complete - SECOND FLOOR (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
102
9197
938152.14
... More
Brick Masonry in CM (1:6) with 2nd class Bricks traditional size 23 x 11 x 7 cms including cost and conveyance of all materials to site and all labour charges complete - THIRD FLOOR (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
102
9255
944080.38
... More
Brick Masonry in CM (1:6) with 2nd class Bricks traditional size 23 x 11 x 7 cms including cost and conveyance of all materials to site and all labour charges complete - FOURTH FLOOR (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
102
9313
950010.66
... More
Brick Masonry in CM (1:6) with 2nd class Bricks traditional size 23 x 11 x 7 cms including cost and conveyance of all materials to site and all labour charges complete - FIFTH FLOOR
62
9371
581060.9
... More
11.5 cm wide Brick masonry for super-structure on ground floor in cm (1:4) using second class traditional size bricks including cost of all materials and it's conveyance, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc.,complete.- FIRST FLOOR(Cellar Floor) (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
17
11424
194211.23
... More
11.5 cm wide Brick masonry for super-structure on ground floor in cm (1:4) using second class traditional size bricks including cost of all materials and it's conveyance, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc.,complete.- SECOND FLOOR. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
36
11482
413364.24
... More
11.5 cm wide Brick masonry for super-structure on ground floor in cm (1:4) using second class traditional size bricks including cost of all materials and it's conveyance, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc.,complete.- THIRD FLOOR. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
36
11540
415456.56
... More
11.5 cm wide Brick masonry for super-structure on ground floor in cm (1:4) using second class traditional size bricks including cost of all materials and it's conveyance, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc.,complete.- FORTH FLOOR. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
36
11598
417549.6
... More
11.5 cm wide Brick masonry for super-structure on ground floor in cm (1:4) using second class traditional size bricks including cost of all materials and it's conveyance, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc.,complete.- FIFTH FLOOR. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
26
11656
303074.72
... More
Plastering with CM (1:3), 12 mm thick in one coat for inernal faces of ceilings etc.,including cost and conveyance of all materials all labour charges etc, complete.- FIRST FLOOR (Cellar Floor) (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
800
519
415504
... More
Plastering with CM (1:3), 12 mm thick in one coat for inernal faces of ceilings etc.,including cost and conveyance of all materials all labour charges etc, complete.- SECOND FLOOR (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
730
530
387396.4
... More
Plastering with CM (1:3), 12 mm thick in one coat for inernal faces of ceilings etc.,including cost and conveyance of all materials all labour charges etc, complete.- THIRD FLOOR (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
730
541
395623.5
... More
Plastering with CM (1:3), 12 mm thick in one coat for inernal faces of ceilings etc.,including cost and conveyance of all materials all labour charges etc, complete.- FOURTH FLOOR (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
730
553
403872.5
... More
Plastering with CM (1:3), 12 mm thick in one coat for inernal faces of ceilings etc.,including cost and conveyance of all materials all labour charges etc, complete.- FIFTH FLOOR (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
113
564
63793.02
... More
Plastering with CM (1:5), 12 mm thick in one coat for inernal faces of walls, ,including cost and conveyance of all materials all labour charges etc, complete.-FIRST FLOOR(Cellar Floor) (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
440
488
215072
... More
Plastering with CM (1:5), 12 mm thick in one coat for inernal faces of walls, ,including cost and conveyance of all materials all labour charges etc, complete.-SECOND FLOOR (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
1065
494
526759.65
... More
Plastering with CM (1:5), 12 mm thick in one coat for inernal faces of walls, ,including cost and conveyance of all materials all labour charges etc, complete.-THIRD FLOOR (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
1065
500
532947.3
... More
Plastering with CM (1:5), 12 mm thick in one coat for inernal faces of walls, ,including cost and conveyance of all materials all labour charges etc, complete.-FOURTH FLOOR (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
1065
506
539145.6
... More
Plastering with CM (1:5), 12 mm thick in one coat for inernal faces of walls, ,including cost and conveyance of all materials all labour charges etc, complete.-FIFTH FLOOR (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
460
512
235538.4
... More
Plastering with CM (1:5), 20 mm thick in one coat for external faces of walls including cost and conveyance of all materials all labour charges etc, complete. - FIRST FLOOR (Cellar Floor) (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
370
509
188463.2
... More
Plastering with CM (1:5), 20 mm thick in one coat for external faces of walls including cost and conveyance of all materials all labour charges etc, complete. - SECOND FLOOR (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
360
515
185461.2
... More
Plastering with CM (1:5), 20 mm thick in one coat for external faces of walls including cost and conveyance of all materials all labour charges etc, complete. - THIRD FLOOR (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
360
520
187552.8
... More
Plastering with CM (1:5), 20 mm thick in one coat for external faces of walls including cost and conveyance of all materials all labour charges etc, complete. - FOURTH FLOOR (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
360
526
189648
... More
Plastering with CM (1:5), 20 mm thick in one coat for external faces of walls including cost and conveyance of all materials all labour charges etc, complete. - FIFTH FLOOR (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
400
532
213040
... More
Laying P.C.C.(1:2:4) using 10 to 12 mm HBG metal including cost and conveyance of all materials to site and all labour charges complete for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
85
6587
559967.25
... More
Flooring with Supply of Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm and 1st quality
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, Make: Somany,HR, Jhonson,Naveen Ceramics, Kajaria, Nitco, Sphinx, RAK or equivalent set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, for finished item of work including the cost of conveyance of all materials. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
2070
1446
2993282.1
... More
Flooring with 8mm thick Non-skid edge cut rectified ceramic tiles Ist quality , set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, including the cost of conveyance of all materials. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
620
1174
728177.6
... More
Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2mm thickness over plastered surface to prepare the surface even and smooth after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife/muslin pad, air dry for 2-3hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work for internal walls.- FIRST FLOOR (Cellar)
770
322
247955.4
... More
Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2mm thickness over plastered surface to prepare the surface even and smooth after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife/muslin pad, air dry for 2-3hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work for internal walls.- SECOND FLOOR
1120
322
360662.4
... More
Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2mm thickness over plastered surface to prepare the surface even and smooth after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife/muslin pad, air dry for 2-3hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work for internal walls.- THIRD FLOOR
1120
322
360662.4
... More
Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2mm thickness over plastered surface to prepare the surface even and smooth after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife/muslin pad, air dry for 2-3hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work for internal walls.- FOURTH FLOOR
1120
322
360662.4
... More
Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2mm thickness over plastered surface to prepare the surface even and smooth after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife/muslin pad, air dry for 2-3hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work for internal walls.- FIFTH FLOOR
135
322
43472.7
... More
Painting with acrylic EXTERIOR emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ litre exterior grade of approved brand and colour/shade two coats over a base coat of appropriate primer (grade-II) of approved brand, making 3 coats in all to give an even shade after thorughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and convyance of all materials, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work.-FIRST FLOOR(Cellar)
370
334
123691
... More
Painting with acrylic EXTERIOR emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ litre exterior grade of approved brand and colour/shade two coats over a base coat of appropriate primer (grade-II) of approved brand, making 3 coats in all to give an even shade after thorughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and convyance of all materials, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work.-SECOND FLOOR
360
340
122436
... More
Painting with acrylic EXTERIOR emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ litre exterior grade of approved brand and colour/shade two coats over a base coat of appropriate primer (grade-II) of approved brand, making 3 coats in all to give an even shade after thorughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and convyance of all materials, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work.-THIRD FLOOR
360
345
124527.6
... More
Painting with acrylic EXTERIOR emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ litre exterior grade of approved brand and colour/shade two coats over a base coat of appropriate primer (grade-II) of approved brand, making 3 coats in all to give an even shade after thorughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and convyance of all materials, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work.-FOURTH FLOOR
360
351
126622.8
... More
Painting with acrylic EXTERIOR emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ litre exterior grade of approved brand and colour/shade two coats over a base coat of appropriate primer (grade-II) of approved brand, making 3 coats in all to give an even shade after thorughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and convyance of all materials, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work.-FIFTH FLOOR
410
357
146591.4
... More
Painting with synthetic polymer plastic INTERIOR emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade two coats over a base coat of appropriate interior primer(grade-I) of approved brand, making 3 coats in all to give an even shade after thorughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and convyance of all materials, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work - FIRST FLOOR(Cellar)
1580
247
390275.8
... More
Painting with synthetic polymer plastic INTERIOR emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade two coats over a base coat of appropriate interior primer(grade-I) of approved brand, making 3 coats in all to give an even shade after thorughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and convyance of all materials, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work - SECOND FLOOR
1860
247
459438.6
... More
Painting with synthetic polymer plastic INTERIOR emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade two coats over a base coat of appropriate interior primer(grade-I) of approved brand, making 3 coats in all to give an even shade after thorughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and convyance of all materials, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work - THIRD FLOOR
1860
247
459438.6
... More
Painting with synthetic polymer plastic INTERIOR emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade two coats over a base coat of appropriate interior primer(grade-I) of approved brand, making 3 coats in all to give an even shade after thorughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and convyance of all materials, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work - FOURTH FLOOR
1860
247
459438.6
... More
Painting with synthetic polymer plastic INTERIOR emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade two coats over a base coat of appropriate interior primer(grade-I) of approved brand, making 3 coats in all to give an even shade after thorughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and convyance of all materials, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work - FIFTH FLOOR
257.99
247
63726.11
... More
Providing R.C.C. plates of 38mm thick with R.C.C.(1:1.5:3) (including cost of steel reinforcement ) and plastering with CM(1:5),12mm thick including cost and conveyance of all materials to site and all labour charges complete. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
50
2011
100597.5
... More
Providing of RCM facia or drop wall 5cm thick in CM (1:3) including seignorage charges with rabbit wire mesh (chicken mesh) of not less than 30gauge & nominal reinforcement as directed by Engineer-in-charge with dubara sponge finishing, including cost & conveyance of all materials to site, scaffolding charges and all labour charges complete. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)
110
3423
376596
... More
Providing and fixing factory made UPVCwhite colour sliding glazedwindow upto1.50m in height dimension comprising of uPVC multi chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60±0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & sizeaccording to uPVCprofile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDMgasket, woolpile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be40kg), G.Ifasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screwsetc. Profile offrame & sash shall be mitred cut andfusion welded at all corners, including drilling of holes for fixing hardware's and drainage of wateretc. After fixing frame the gap between frame and adjacent finished walls all be filled with weather proof silicon sealent over backer rod of required size and ofapproved quality, all complete as per approved drawing & direction of Engineer -in - Charge inclusive of cost of Single/double glasspanes, wiremesh and silicon sealent .Note: For uPVC frame and sash extruded profiles minus 5%tolerancein dimension i.e. in depth &width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment onthis account shallbemade.Two track two panels sliding window made of (big series)frame 67 x 50 mm & sash 46 x 62 mmboth having wallthickness of 2.3 ± 0.2 mm and singleglazing bead / doubleglazing bead of appropriate dimension .(Area of window upto 1.75 sqm ).
160
7907
1265216
... More
Supply and fixing of M.S. grill to Ground floor windows with 10mm square solid rods with 25mm x 25mm x 5mm L Angle and approved design given by the department and as directed by the engineer at site including cost and conveyance of all materials and all labour charges etc., complete. (1.22X1.22 )
160
2726
436187.2
... More
Flush door: supply and fixing of 35 mm thick flush door single shutter, solid bond wood block board type with teak veneer on both faces including 5mm thick glass and supplying positioning and fixing door frame with well seasoned assam teak/beeja sal/sal wood scantlings of size 100 mm x 75 mm, including 6 nos. Of ms 'z' hold fasts of size 250x50x8 mm,including aluminium 3 nos. Of 125 mm butt hinges, 1 no. Door stoper, 2 no. 100 mm long door handles , 1 no. Aldrop of size 250 mm long , 1 nos. Of 200 mm long tower bolts, with bolts, nuts, nf screws including cost and conveyance of all materials to site, labour charges etc., including minor extra fixtures required if any as directed by the engineer-in-chrge of the work complete for finished item of work
51
8979
457940.73
... More
Supply and fixing of CEMENT BONDED PRE-LAMINATED PARTICLE BOARDS aluminum glazed partitions using 10 MM CEMENT BONDED PRE-LAMINATED PARTICLE BOARDS and 5.00 mm thick plain glass to full height. Using with LAM to a height of 0.91 meter at bottom panel and remaining height with glass and aluminum sections anodized to 12 to 15 microns and of sections of size 37mm x 62mm and 1.5mm thickness with one meter centre to centre duly fixed with clip beading on both sides including fixing the frame to pillars by M.S. flats, bolts and nuts including cost and conveyance of all materials etc., complete as directed during execution.
228
4035
920116.8
... More
Supply and fixing Aluminium Single Shutter door partly Glazed &Panneled with aluminium anodised sections of Jindal sections Shutter frame top of size 44.45 mm x 47.62 mm x 1.95 section 19571 , bottom of size 44.45 mm x 114.30 mm x 2.15 section 19574 and verticals of 19569 of size 44.45 mm x 47.62 mm x 2.02 and fitted with 10mm thick both sides prelaminated cement particle board and 5mm thick plain glass for shutter and other acccessories like supply and fixing aluminium handles, door stoppers, latches, etc.,for each shutter, and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work
21
5209
109394.25
... More
Providing and fixing Aluminium Extruded Section Body Tubular Type Hydraulic Door Closer (IS: 3564) with double speed adjustment with necessary accessories and screws etc. complete (Type-3: for width of doors 851 to 1000 mm)
10
1707
17076.3
... More
Providing and fixing of Wood Polymer Composite (WPC) solid doors with frame. Door shutter consists of Wood Polymer Composite (WPC) solid, frosty white single extruded factory made in 18 MM thickness (Density 650 kg/Cum, Weight 35Kg) and Door Frame consists of solid Wood Polymer Composite (WPC) single extruded section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member and with fixtures 1no aluminium aldrop 200mm lond and 2nos tower bolt 150mm long, the rate is inclusive of cost and conveyance of all materials to site and all labour charges complete.
26
6032
156837.2
... More
Supply and fixing of PVC false ceiling on MS/GI made skeleton framework.The frame shall be 24 X 48mm MS tube section fixed along with the wall. The entire frame work shall be concealed with PVC section having overall dimensions of 6 X 250mm with a wall thickness of 1mm ± 0.3mm with tongue and groove system, provided with necessary arrangements for electrical connections, complete, for finished item of work.
1283
1740
2233164.14
... More
Supplying & fixing collapsible steel shutters with vertical, double channel of 20 x10x2 mm of 100 mm centre, Bracers with flat iron 40x40x6 mm with 38 mm dia steel pulleys, the top, bottom and side vertical frames of the collapsible gate with 65x65mmx8mm MS Angle and middle guide rail at site height with 65mmx8mm MS flat for the pulleys to guide and fixed with locking arrangements, stoppers, handles, all accessories all fixtures and painted with one coat of approved steel primer etc., complete for finished item of work.
14.6
4420
64543.1
... More
Supply, fabrication and fixing of stainless steel railing of approved design with Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes & diameters for grade -304 including all accessories and all labour charges complete for finished item of work.
694
873
605924.46
... More
Supply and fixing of European Water Closet of Ist quality with plastic seat and lid and low down flushing tank 10 Lit capacity confirming to IS:2556-Part-2-1973 of Hidustan/Neycer or Parry ware make white glazed with 'S' trap.
14
5166
72324.98
... More
Supply and fixing of 110 mm dia (6kg/sqcm) PVC pipes including cost and conveyance of all materials all labour charges etc., complete.
90
453
40826.7
... More
Supply and fixing of 75 mm dia (6kg/sqcm) PVC pipes including cost and conveyance of all materials all labour charges etc., complete.
80
299
23928.8
... More
Supply and fixing Indian make Flat Back Wash Hand basin with pedestal (HSW/Parryware/Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15mm nominal bore chromium plated pillar tap of 1st quality Indian make 400 grams Seiko/Senior/Nice/Esso or equivalent complete with standard CI brackets : 550 x 400 mm - double C.P. Pillar cock.
10
4542
45427.8
... More
Supply and Fixing of Premium make CPVC Pipes of 1" dia (28.60mm ODPipe - SDR 13.5) and Fittings to meet the requirement of ASTM-D 2846 having the same physical Properties for Hot and Cold Water (IS 15778:2007)
200
290
58080
... More
Supply and Fixing of Premium make CPVC Pipes of 1/2" dia (15.90mm OD Pipe - SDR 13.5) and Fittings to meet the requirement of ASTM-D 2846 having the same physical Properties for Hot and Cold Water (IS 15778:2007)
150
216
32482.5
... More
Supply and fixing CP Long body bib cock facy type deluxe heavy duty 12.7mm dia Indian make Seiko/Senior/Nice or equivalent
12
689
8275.68
... More
Supply and fixing CP Short body bib cock facy type deluxe heavy duty 12.7mm dia Indian make Seiko/Senior/Nice or equivalent
12
661
7934.88
... More
Supply and fixing PVC 1" gate valve including cost of PVC pipe, bends, couplings and Running Joints etc., complete.
10
1553
15531.2
... More
Supply and fixing of Polyethylene water storage tank double layer conforming to IS:12701-1996 with lid.
4000
10
40440
... More
Supplying and Fixing 76.2 mm Nahny Trap 1st quality in RCC floors
12
106
1278.84
... More
Supply and fixing of soap stands in the washroms including cost and conveyance of all materials, labour charges etc.,
6
262
1574.7
... More
Supply and fixing of 25.4 mm dia& 609.6 mm long aluminium anodized towel rod with brackets and aluminium screws including cost and conveyance of all materials, labour charges etc., complete
6
184
1104.36
... More
Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make (HSW/Parry/Neyce
12
3404
40849.56
... More
Supply and Fixing of 25mm outer dia (1.6-1.8)mm thick rigid P.V.C. pipe (ISI MARK) of make Sudhakar /Macoplast/Modi with all required accessories like bends, junction box with cover etc., including all labour charges etc., complete.
800
112
90200
... More
Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A modular switch, Ceiling rose and hot dip galvanized metal boxes with cover frame to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings (makes Anchor / Gold Medal / Million / Vimal / Maru / Milltec.)
180
858
154524.6
... More
Providing 6A modular switch with 3 No 3/2 pin socket, and hot dip galvanized metal boxes with modular cover frame to switch control box including all labour charges etc., complete in Non-Residential Buildings Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Ducor /L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA)
80
1178
94300.8
... More
Supply and run of 4 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.
180
185
33357.6
... More
Wiring with 4 runs of 56/0.3mm ( 4.0 Sq.mm) Fire retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing metalic/ Non- metalic conduit pipe for run of mains including all labour charges etc.,from LDB at each floor to the Board.
80
301
24159.2
... More
Supply and fixing of 4way SPN Distribution Board with IP 43 protection concealed in wall including chisiling, masonry work & suitable for S.P. out going MCBs in sheet steel enclosure with 1no. 40A FP Isolator and 4 Nos 6-32A SP MCBs including (make ABB/Standard / Havells-euro II / C&S / L&T/GM /Gold Medal/Anchor/Salzer/Polycab ) complete for finished item of work as per directions of Eng-in-charge..
4
6160
24642.2
... More
Providing independent earthing by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.
6
7312
43875.3
... More
Supply and fixing of 20W,1900lumens T8,not less than 1100mmlength LED retrofit tube light withaluminium anodised body, inputvoltage AC 220 - 260 Volts withPF0.9, Surge protection: 2KV,THD10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K,minimum CRI70, .etc., complete as per IS 10322 (Part 5/ Sec 1)..2012 Makes : As per list of recommended brands as category II.
60
568
34084.8
... More
Supply and fixing 48" (1200mm) Sweep Ceiling Fan of makes (Crompton High speed/Bajaj Ultima/Havells Velocity/ Usha Astra/ Orient Summer Pride) with Modular Electronic Regulator of makes (Crab Tree/Feno Swtch/ Toyoma/Fortune Art/ Million / Gold Medal / Vimal / Anchor Roma)
30
3396
101891.4
... More
Supply and fixing of (7 to 9)W LED Lamp with input voltage 90 to 300V, Color temperature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base.Makes: Phillips /Crompton / Bajaj / Havells / Halonix/GM/HPLSyska / Green Lites / Fortune Arrt / GoldMedal / Luker/Leo/Orbit /Rhino / GLO LED/Million/Victoria/Benlo/Goldwyn
15
146
2198.4
... More
Supply and fixing of 24W LED Slim Panel Round / Square suitable for Recessed / Surface mounting made of diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltage range of 150 to 265 Volts AC, P.F 0.9, Surge protection: 2KV,THD10%, with high power LED's having acy of 120 lumins/watt,CCT: 3000K - 5700K, minimum CRI70, .etc., complete Makes : VIN/Surya / Fortune Art / Syska / GM / Green Lites / Gold Medal / C&S / Pharox / Anchor asonic / Stanjo/Ib LED/Promtec/Eveready/Enrich/Opple b) LED MAKE : CREE / NICHIA / OSRAM / SAMSUNG / EVERLIGHT/ San'an
30
1508
45264.3
... More
Supply and fixing of one 6A modular switch control & two 6A 3/2 pin socket and one 16A modular switch control and one 16A 3/2 pin socket on white coloured modular box with cover frame on separate board including all labour charges etc., complete but exluding the cost of wire. (makes Crabtree/Feno Switch/Toyoma/Fortune art)
15
1242
18642.45
... More
Supply of 25 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) Makes: RPG / Finolex / Finecab / Paragon / V-Guard / Fortune Art / Suncab / Orbit.
25
415
10395
... More
Supply and fixing of Porcelain Rewirable 100A Fuse Units with wooden board. Makes: C&S/Standard/HPL/ Sputnik / Million / Gold Medal / Benlo /Anchor including all labour charges etc., complete
4
1103
4412.36
... More
Supply and fixing air exhaust fan of light duty metallic blades 300mm(12") 900 R.P.M with double ball bearing and wire guard etc., complete of makes Crompton/Bajaj Bahar WG/ Havells Ventil Air - DS / Orient hill air.
10
4042
40427.1
... More
Supply, installation testing and commisioning of 4 pair 23AWG Cat6 UTP ,flexible , double ended patch cords 2m/7ft along with 2 nos of RJ 45 connectors with strain relief boots Compatible to T568A,T568Bspecifications including making connections to information outlets
Makes: Systimax /AMP/ Panduit/ Siemond/ /Legrand
40
338
13542.8
... More
Supply, laying, testing and commisioning of 4-pair, Cat6 Solid (Third party ETL Intertek tested 600 MHZ above) to support 1Gbps with Cross (+) filler pair seperator & PVC sheath 23 AWG, STP/UTP Cable , Meets or exceeds ANSI/TIA-568-C.2 and UL Listed &RoHS Compliant in the existing raceways /pvc conduits including making connections to information outlets and patch panels with ferruling at both ends for identifiation with necessary tools for punching stripping crimping and testing required etc., complete
Makes: Systimax /AMP/ Panduit/ Siemond/ Molex/Legrand
500
51
25565
... More
Supply, Installation, Testing and Comissioning of 9U(44mm)Wall mounted Communication rack in two sections viz rear wall mount Section and hinged front section with glass doors, swing handles ,lock , Top and Bottom Cable entries,Supports for mounting rack on wall , Cable managers, Fan tray with 2 x 230 Volt fans, Equipment mounting hardware, wire managers , power supply box for supplying power to hubs, fans etc along with earth continuity kit, Mcb, indicator, moulded power supply cable, Blank panels , sliding shelves etc. along with Power Spike
Make: APW/HCL/Valrack/Netrack
2
11812
23625.1
... More
Supply and fixing of 10 passenger lift (680 Kg's) Kone make with speed 1 m/sec, with micro processor based VVVF drive with front entrance no of floors served Ground + 3 floors(4 stops & 4 openings), with a travel of 9.9 meters Approx, with car inside size 1300 mm Wide X1350 mm DeepX 2200 mm height , car clear opening 800 mm Wide X 2000mm Height with main power supply- 400/440V 3 phase 50 Hz for auxiliaries, car enclosure( Stainless steel and panels stainless steel -304 , ceiling stainless steel -304) center opening doors, with Micro Processor based Down collective simplex with electro mechanical door lock with seven segment digital display. The lift is provided with following features Battery operated emergency light and alarm bell, call register signal and Vf door operator, Landing push button in landing door frames, Automatic rescue device, Stainless steel button with SS cover, Digital position Indicator in car and landings, False ceiling in Car, Infra red door screen, Overload warning Indicator, SS hand rail on rear side etc., as approved by Eng-in-charge including cost and conveyance of all materials, labour charges, leads and lifts and finishing for finished item of work as directed by Engineer-in-charge
1
1369645
1369645
... More
Supplying and fixing of curtain Glazing made of pre painted steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM) Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12- 16 microns thick and back coated with 5-7 microns thick alkyd backer using the section for outer frame of 46 x 52 mm, section for mullion of 46 x 70 mm and section for beading of 18 x 25 mm and the glazing with 5 mm thick plain float glass fitted with Ethyl Propylene diameine Monomer (EPDM) gaskets and the sections cut to length, mitre joined with corner bracket, centre mullions fixed suing mullion cap inluding handle made of high grade Aluminium powder coated and nylon receiver, corner brackets made of CRCA with zinc phosphating, mullion caps made of Glass filled nylon including fixing the frames in the concrete / masonry wall with self expanding screws, etc., complete for finished item.- Fixed Glazing 2'-0" x 2'-0" (609.6x609.6mm) grid outer frames section size of 46 x 52 mm
395
7077
2795446.6
... More
Supplying and fixing aluminium composite cladding with skin material 0.5 mm thick aluminium sheet cover material natural polyethylene aluminium cladding panel fixed with extruded aluminium basis frame (50x25x1.5mm) angle cleats,weather sealants, rivets, GI brackets all as approved, using suitable bolts on structural steel work including necessary accessories complete in all respects including all scaffolding and labour charges etc., complete for finished item of work but excluding cost of structural steel fabrication, if any, ACP Cladding - 4 mm thk
160
3347
535536
... More
Scope of Work involves designing (architectural , structural , MEP ) of buildings like office buildings, section office , administration building, workshop, garage or , any type building / structure, modification of existing above buildings design, augmentation of existing above structures etc. it also includes standard Soil investigation bore holes of 150mm diameter upto a depth of 10m below existing ground level or as directed including Conducting Standard Penetration Test (SPT) at regular depth intervals, Collection of Split Spoon samples or Disturbed Soil Samples and regular site visit carried out as per the job requirement of this line item shall not be paid separately
1
310000
310000
... More
Supply and fixing( Positioning) modular panel based 8 units work station of size 4’x 4' x4’ double skinned partition of 62 mm (+/-5%) thick made out of extrude Aluminium sections powder coated with 12mm thick pre-laminated particle board panels/soft board / marker board panels, all the exposed metal surfaces of supports, top covers and hardware for fixing furniture to partition is to be powder coated with approved colour/Shade of 50 micron thick and provision for built in cable management provided with 2 No integrated wire ways of 130mm high, provided one each at skirting level and other at just below / above the work top (table ) level. The minimum free space required in the wire ways to accommodate power, data and communication cables is to be 30mmx120mm with injection moulded ABS end caps and with side partitions for every work station and with the front walls below the table top only (Switches and sockets of RAW power/ UPS /Data /Telephone shall be recessed).Provision should be made for three 5 amp socktes (one with switch control) and telephone jack, just below/above table top and one 5amp switch and one number RJ 15 and one No RJ 45 socket for LAN point below table top. The table top with PLB 25mm thick post formed particle board and the surface top with all exposed edges duly edge banded. The pin board is made of 12 mm thick soft board covered with approved colour/ shade /design/ texture fabric. The partition is to be provided with leveling bolts to account for any unevenness in the floor. The work station provided with table top of width of 450 to 600 mm and height of table top is 750 mm from the floor level. Key board tray with high impact plastic and C P U stand/ trolley and PLB 3 draw pedestal unit of size 450 x 500 x 650 mm as per approved design, make and accessiores and as per drawing and directions of Eng-in- charge .
5
272676
1363380
... More
Supply and fixing( Positioning) modular panel based 2 units work station of size 4’x 4' x4’ double skinned partition of 62 mm (+/-5%) thick made out of extrude Aluminium sections powder coated with 12mm thick pre-laminated particle board panels/soft board / marker board panels, all the exposed metal surfaces of supports, top covers and hardware for fixing furniture to partition is to be powder coated with approved colour/Shade of 50 micron thick and provision for built in cable management provided with 2 No integrated wire ways of 130mm high, provided one each at skirting level and other at just below / above the work top (table ) level. The minimum free space required in the wire ways to accommodate power, data and communication cables is to be 30mmx120mm with injection moulded ABS end caps and with side partitions for every work station and with the front walls below the table top only (Switches and sockets of RAW power/ UPS /Data /Telephone shall be recessed).Provision should be made for three 5 amp socktes (one with switch control) and telephone jack, just below/above table top and one 5amp switch and one number RJ 15 and one No RJ 45 socket for LAN point below table top. The table top with PLB 25mm thick post formed particle board and the surface top with all exposed edges duly edge banded. The pin board is made of 12 mm thick soft board covered with approved colour/ shade /design/ texture fabric. The partition is to be provided with leveling bolts to account for any unevenness in the floor. The work station provided with table top of width of 450 to 600 mm and height of table top is 750 mm from the floor level. Key board tray with high impact plastic and C P U stand/ trolley and PLB 3 draw pedestal unit of size 450 x 500 x 650 mm as per approved design, make and accessiores and as per drawing and directions of Eng-in- charge .
15
68169
1022535
... More
Supply of Table Type-I size shall be 1500 Width mm x 750 Depth mm x 750 Height mm . The table top shall be made of pre- laminated particle board with 18 mm thick and 15 mm thick understructure covered with PVC lipping .There shall be locking provided for top drawers only , attractive black colour handles for all drawers plus only one colour is available beech. It shall have one drawer (RHS ) & HDU attachment on one side & 3 drawer unit on the other side ( LHS of user ) .Enzo Table - 5026 size : 1500 W x 750 D x 750 H
1
20257
20257.55
... More
Supply of Table Type-II size shall be 1200 Width mm x 600 Depth mm x 750 Height mm . The table top shall be made of pre- laminated particle board with 18 mm thick and 15 mm thick understructure covered with PVC lipping. There is a Keyboard trolley attached to the desk by default. The locking provision is given only for the top drawer. It consists of total 3 drawers on one side and open stoarge space for CPU and any other documents given on right hand side. STYLO desk size : 1200W x 600D x 750H, in mm
5
15990
79950.9
... More
Supply of Chair Type-I Mid back (OXBO) with SEAT ASSEMBLY: The seat assembly should be made up of 1.2 ±0.1cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam.SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D).BACK ASSEMBLY: The back asembly. should be made of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn.BACK SIZE : 46.5 cm (W) x 70.5 cm (H).HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. CENTRE-TILT mechanism: The mechashould be m should be designed with the following features:• 360° revolving type, • 17° ±2° maximum tilt on pivot at centre,• Upright position locking. Tilt tension adjustment. .PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. TELESCOPIC BELLOW ASSY: The bellow should be 3 piece telescopic type and injection moulded in Black Polypropylene. PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors.)TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black nylon.Overall Dimensions of Chair Seat Height - min 43.3 to max 54.3cm.Height - min 99.5 to max 110.5cm.Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm
15
10602
159031.2
... More
Supply of Chair Type-II Low back (OXBO)SEAT ASSEMBLY: The seat assembly should be made up of 1.2 ±0.1cm. thick hot-pressed plywood , upholstered with fabric upholstery covers and moulded Polyurethane foam.SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D).BACK ASSEMBLY: The back asembly. should be made of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn.BACK SIZE : 46.5 cm (W) x 60.5 cm (H).HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression.ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. CENTRE-TILT mechanism: The mechashould be m should be designed with the following features:• 360° revolving type.,• 17° ±2° maximum tilt on pivot at centre• Upright position locking.• Tilt tension adjustment. .PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. TELESCOPIC BELLOW ASSY: The bellow should be 3 piece telescopic type and injection moulded in Black Polypropylene. PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors.)TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black nylon.Overall Dimensions of Chair Seat Height - min 43.3 to max 54.3cm. Height - min 89.5 to max 100.5cm.Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm.
30
8589
257678.7
... More
Supply of Visitor Chair (OXBO)SEAT ASSEMBLY: The seat assembly should be made up of 1.2 ±0.1cm. thick hot-pressed plywood , upholstered with fabric upholstery covers and moulded Polyurethane foam.
SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D). BACK ASSEMBLY: The back asembly. should be made of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn. BACK SIZE : 46.5 cm. (W) x 60.5cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. TUBULAR FRAME: The powder coated (DFT 40-60.microns) tubular frame should be cantilever type & made of Ø2.54 ±0.03cm. x0.2 ±0.016cm thick M.S.E.R.W. Tube. Overall Dimensions of Chair Seat Height - 46.5cm.
Height - 93.5cm.Width & Depth of Chair as measured from pedestal - Width-61.0 cm and Depth-64.5 cm.
90
7104
639391.5
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%