Directorate General Of Lighthouses And Lightships Tender

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 150 metres lead outside compound wall of Deep Bhavan as per direction of Engineer - in- charge. including cost of all heights,labours, tools & plants and all other charges etc., complete

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 150 metres lead outside compound wall of Deep Bhavan including cost of all heights,labours, tools & plants and all other charges etc., complete

Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge including cost of all heights, labours, tools & plants and all other charges etc., complete

Providing and laying vitrified floor tiles in Size of Tile 800x800 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm avg. thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete and as directed by Engineer-in-charge.including cost of all heights,labours, materials, tools & plants and all other charges etc., complete

Providing and laying Vitrified tiles in Size of Tile 800x800 mm for skirting (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm avg. thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.and as directed by Engineer-in-charge.including cost of all heights,labours, materials, tools & plants and all other charges etc., complete

Providing and fixing false ceiling 12.5 mm thick tapered edge gypsum moisture resistant board at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge. including cost of all heights,labours, materials, tools & plants and all other charges etc., complete

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement :3 coarse sand) as per drawing, all as per standard specifications and as directed including cost of all labour, materials, tools & plants, curing, scaffolding, etc. complete.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in Cement mortar 1:4 (1 cement :3 coarse sand) as per drawing, all as per standard specifications and as directed including cost of all labour, materials, tools & plants, curing, scaffolding, etc. complete.

Providing and laying 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:

Providing Steel reinforcement Fe-500D of approved brand (SAIL, TATA TISCON, VIZAG STEEL ) for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and above plinth level of tested Tor steel reinforcement of approved 1st quality as per drawing and as directed at all heights including cost of all labour, materials, tools & plants etc., and other charges complete.

15 mm thick cement plaster with CM 1:3 of brick masonry surfaces and Concrete surfaces for INTERIOR plastering up to floor two level, including and finished even and smooth in CM 1 : 3 including supply of all material,labours, tools & plants and all other charges etc., complete.

Providing and fixing factory made uPVC white colour Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 sqm upto 2.50 sqm). sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (including Single / double glass panes, wire mesh and silicon sealent ). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Providing & fixing 5.5 mm thick glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : including supply of all material,labours, tools & plants and all other charges etc., complete.

Providing and applying wallcare putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. including supply of all material,labours, tools & plants and all other charges etc., complete.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. including supply of all material, labours, tools & plants and all other charges etc., complete.

Providing and fixing 18 mm thick Granite stone of gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. including supply of all material,labours, tools & plants and all other charges etc., complete.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink of size 610x460 mm bowl depth 200 mm as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required complete at all levels. including supply of all material,labours, tools & plants and all other charges etc., complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.including cost of all labour, materials, scaffolding, tools and plants,and all other charges etc., complete.

a) 25 mm nominal dia Pipes

b) 15 mm nominal dia Pipes

Providing and fixing 75 mm diameter PVC Pipe (6kgf/cm2) on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.including all fittings & fixtures and as including cost of all labour, materials, tools and plants,and all other charges etc., complete.

Providing and fixing CP Brass water supply fittings ( Approved Make & quality) with all necessary fixtures and specials of approved first quality brand/manufacturer,colour (ISI make) as per the following items including cost of all materials, labours, tools & plants and all other charges etc complete.

P & F of C.P. brass Sensor Tap Automatic - Warranty Special, Touchless Sensor Taps for Basin (Prefered make: Bharat Photon Indian Automatic AC-DC Faucet (Brass Chrome)/ Jaguar/ Kohler) for Washroom & Bathroom.

Providing and fixing 15mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931.

Providing and fixing 32 mm dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

P & F of White Vitreous China Wash basin size 630x450 mm with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls

Providing and fixing White Single Piece-WC, (European type W.C. pan) with seat and lid,(Prefered Model Number: SLS-WHT-6851S300PP), Size: 360x725x735 mm and Application: Bathroom, 10 litre low level white flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required and all other charges etc., complete. .

P & F of Mixer valve Drizzle Soft Wall Mixer 2in1 Tap Brass/Bathroom Water Mixture Faucet with L Bend/Foam Flow/Quarter Turn

P & F of CP.Brass 150 mm diameter Shower rose

P & F of CP brass Towel rail 20 mm dia 600 mm Long (Make approved quality)

P & F of C.P.Brass towel ring with concealed fittings arrangement of approved quality and colour, where ever necessary

P & F of Long body Bib cock

P & F of C.P. brass soap Dish

Providing and fixing 600x450 mm beveled edge mirror of superior glass ( Make approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. each including supply of all materials, labours, Screws, tools and all other charges etc., complete.

Providing, fabricating and fixing of Modular Kitchen Cub boards, cub board shutters, table and Almirah for Kitchen room and Bed Rooms

Providing, fabricating and fixing of 19 mm thick Fire retardant plywood conforming to IS: 5509, for Modular Kitchen Cup boards, cup board shutters, table and Almirah Panelling for panelled or panelled and glazed shutters. Water proof and Termite proof. Including supply of all material,labours, tools & plants and all other charges etc., complete.

Providing, fabricating and fixing of decorative high pressure 1.0 mm thick laminated sheet (sunmake) of plain / wood grain in gloss / matt/ suede finish with fast gum & high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. Including supply of all material,labours, tools & plants and all other charges etc., complete.

Providing and fixing of bright finished met Craft Steel Soft Close Clip on 3D Hydraulic Concealed Hinges for full Overlay shutter with necessary screws etc. completd.Including supply of all material,labours, tools & plants and all other charges etc., complete.

Providing and fixing of Magnetic locking system for desks to Cabins with iron screws, plugs and priming coat on unexposed surface etc. complete : as per directions of engineer-in-charge. Including supply of all material,labours, tools & plants and all other charges etc., complete.

Providing and fixing of bright finished 100 mm brass handles for desks to Cabins with iron screws, plugs and priming coat on unexposed surface etc. complete : as per directions of engineer-in-charge. Including supply of all material,labours, tools & plants and all other charges etc., complete.

Providing and fixing of ‎Stainless Steel Corner Brace, 1.5”x1.2” Small Corner Bracket, Heavy Duty 90 Degree Internal Angle Brackets, L Shape Brackets Joint Fastener for Wood Furniture Board Window Cabinet Table for dasks to Cabins with iron screws, plugs and priming coat on unexposed surface etc. complete : as per directions of engineer-in-charge. Including supply of all material, labours, tools & plants and all other charges etc., complete.

Providing and fixing of ‎Stainless Steel Perforatred Sheet Kitchen Basket fixture for Modular Kitchen of Size 21"x20" for dasks to Cabins with iron screws, including Sliding Channels (Brackets), plugs and priming coat on unexposed surface etc. complete : as per directions of engineer-in-charge. Including supply of all material, labours, tools & plants and all other charges etc. complete.

Providing and fixing of Volo Stainless Steel Heavy Duty Telescopic Slide/Drawer Channel - 12 inch (Silver) Sliding hinges for dasks to Cabins with iron screws, plugs and priming coat on unexposed surface etc. complete : as per directions of engineer-in-charge. Including supply of all material,labours, tools & plants and all other charges etc., complete.

Providing and fixing stainless steel (Grade 304) railing made of 75 mm dia Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).including cost of all labour, materials, tools & plants etc., and all other charges complete.

Dismantling of tiles work in floors and walls laid in cement mortar For thickness of tiles 10 mm to 25 mm, including stacking material within 150 metres lead.including cost of all labour, materials, tools & plants etc., and all other charges complete.

Dismantling of Sanitary items Like EWC, Wash basin, shower, bibcock, towel ring, towel rail, soap dish, mirror and pipe line, including stacking material within 150 metres lead.including cost of all labour, materials, tools & plants etc., and all other charges complete.

Providing & laying of Anti- Skid Ceramic floor tiles for Bath and Glazed wall tiles for Toilets

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. including supply of all labours, tools, materials and finishing etc. complete as directed by the engineer in charge.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.Including supply of all material,labours, tools & plants and all other charges etc., complete.

Part B (Electrical Works)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

1 or 2 Module (75mm * 75mm)

3 Module (100mm * 75mm)

4 Module (125mm * 75mm)

6 Module (200mm * 75mm)

12 Module (200mm * 150mm)

Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A Switch

2 way 5/6A Switch

15/16 A Switch

3 pin 5/6 A Socket outlet

6 pin 15/16 A Socket outlet

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Upto 450 mm sweep

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.

25 mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

2 x 1.5 sq. mm(for false ceiling)

3 x 1.5 sq. mm

3 x 2.5 sq. mm

3 x 4 sq. mm

Supply of 24W LED tube Light Battens 4 feet, with LED Tube (inclusive), (refer Sl No.36 for installation)

Supply of LED 18 W Square Led false ceiling light with driver Recessed Downlighter for False Ceiling (refer Sl No.36 for installation)

Supply of Wall Mounting Luminaries, 20 W Full Glass LED lamp B22/E27 (Non Dimmable) (refer Sl No.36 for installation)

Supply of Electric Ceiling Fan with BLDC 1200mm Energy Saving with Remote Control 5 Star Ceiling Fan (refer Sl No.35 for installation)

Supply of 9W LED Outdoor Exterior Wall Step UP/Down Light Fixture Lamp Black Finish Warm White (refer Sl No.36 for installation)

Supply of 250mm size Type propeller type ac ventilating fan-exhaust fan.(installation 37.01)

Supply of Battery operated Wireless doorbell receiver with one battery operated transmitter Receiver with LED flashing indicator calling bell 22 meters of range with batteries.

False ceiling electrification charges (including cutting ceiling sheet for fixing light, laying wires with pipe etc) For IQ 1, 2 and 3).

Supply of 25mm flexible pipe for false ceiling.

Labour charge for Dismantling of existing as not required wiring and switch boards and fans tube light fittings, Geysers, Ceiling fan, exhaust fan etc.,(IQ1, 2 and 3). The removed wires should be rolled and handed over to Site engineer. The existing wires, swtich boards removed without any demage. The removal of wires in supervision of representative in this directorate.

Miscellaneous items for the purchase of screws, Bolts, Nuts & Washers, drill bits, cable ties, 25mm PVC insulation, 25mm PVC bends, tees, 1,2,3,4 way junction boxes,Cutting plates, 12 mm anchor fastner hooks, Fan rod for extension, wire strippers, steel spring, pvc junctions boxes etc.,

Servicing charge & material charge of Gas filling, if required additional copper pipes. for existing 1.5 ton air conditioners at IQ 2 and 3.

Dismantling existing of 2 Nos 1.5 ton air conditioners and the same to be re-installing including Servicing (water with jet pump).(while doing false ceiling work)

Transportation charge up to Deep bhavan, Visakhapatnam