Andhra University Tender

Internal Electrification of ground floor plus 4 floors;Exhaust fan 12? sweep Crompton with blades to be fixed in ventilator or wall with necessary masionary work.

Internal Electrification of ground floor plus 4 floors;Socket out let 2 pin/3pin 5 Amps 3Nos with 3 Nos switches fixed on modular plate of required size.

Internal Electrification of ground floor plus 4 floors;Socket out let 3pin 5/15 amps controlled by separate 15 Amps switch fixed on modular plate of required size for projector connection.

Internal Electrification of ground floor plus 4 floors;ICTPN switch fuse 125Amps 415V with HRC fuses to be fixed on the iron channels. (L&T/ABB/C&S)

Internal Electrification of ground floor plus 4 floors;Bus bar chamber 3 phase 100A with 4 Nos. alluminimum bus bars fixing on the iron channels.

Internal Electrification of ground floor plus 4 floors;MCB DB double door TPN 4 way with TPN 60Amps isolator as Incomer and 12 Nos. 15- 30A SP MCBs as outgoing. (Standard/Asian/Legrand)

Internal Electrification of ground floor plus 4 floors;MCB DB DD SPN 12 way with 40 ADP Isolator and 10 Nos 5-15Amps SP MCBs (Legrand(Ekinox 3)/ L&T-Newrange / Indo Asian-Opti Pro)

Internal Electrification of ground floor plus 4 floors;Earth pipe of GI pipe 40mm dia 3 Mts, long with 6x600x600mm GI plate, Chemical powder etc, connected with 25x3mm GI flat as per IS standards.

Internal Electrification of ground floor plus 4 floors;Run of GI flat 25x3 and connection to main switch and distribution boards.

Internal Electrification of ground floor plus 4 floors;Ceiling fan hook with 12mm M.S. Rod. (Not anchior fastened hooks)

Internal Electrification of ground floor plus 4 floors;M.S. Fan rod

Internal Electrification of ground floor plus 4 floors;Light, calling bell and exhaust fan points with 2 Nos.1 sq.mm copper wires.

Internal Electrification of ground floor plus 4 floors;Ceiling fan points with 3 Nos. 1 sq.mm copper wires including earth.

Internal Electrification of ground floor plus 4 floors;Socket out let points including providing of 3 pin 5A socket out let and switch with 3 Nos. 1 sq.mm copper wires.

Internal Electrification of ground floor plus 4 floors;Connection to 3 pin 15Amps socket and computer sockets with 2 Nos. 2.5 sq.mm and 1 No. 1 sq.mm copper wires connected from DB.

Internal Electrification of ground floor plus 4 floors;Run of 4 Nos.16 sq.mm and 1 No. 4 sq.mm copper wires.

Internal Electrification of ground floor plus 4 floors;Run of 2 Nos.10 sq.mm and 1 No. 4 sq.mm copper wires.

Internal Electrification of ground floor plus 4 floors;Run of 4 Nos.10 sq.mm and 1 No. 4 sq.mm copper wires.

Internal Electrification of ground floor plus 4 floors;Supply, laying, terminations, glanding, lugging and connecting of following XLPE insulated sheathed armoured underground cable 3 ½Core run on wall and beam with necessary clamps, connections etc complete from ground floor to top floor. The measurements may be changesd as per site condition. a.       300 Sqmm [Double Run]

Internal Electrification of ground floor plus 4 floors;   95 Sqmm

Internal Electrification of ground floor plus 4 floors;50 sqmm

Internal Electrification of ground floor plus 4 floors;Supply, installation, testing & commissioning of 3 phase 415V 4 wire Free Standing Floor mounted MV panel made out of 14 SWG CRCA sheet and Painting with Epoxy powder coating after seven tank process surface preparation. The panel shall consist of suitable rating TPN Aluminium busbar at the rating of 0.8/Sq.mm) supported with DMC/SMC barriers and colour coded with Heatshrinkable sleeves. The Metering shall be providedas specified. he panel shall have Short circuit with standing capacity of minimum 50KA and consist of the switchgear as mentioned below: The panel shall be got fabricated from manufacturers with CPRI Test certificate only.The PCC shall have atleast two spare cubicles of the maximum rating. All feeders shall be earthed with 2 G.I.flats of adequate size to the main earth bus of 50x6mm GI flat. The size of all Panel Mounting Meters shall be 96X96mm. The Panels shall be mounted on MS channels including supply and fixing of the same [MAKES: SCHNEIDER/L&T] Incomer1 : 800A, 50KA 4 Pole Manually operated draw out type ACCB with Electronic releases for Overload and Short Circuit- 1set Change Over: 630 amps 4 Pole Change over Switch Change Over: 630 amps 4 Pole Change over Switch Busbars : 800A TPN Aluminium Busbars- 1set Outgoings : 250A 50KA TP MCCBs - 2 Nos 125A TPN SF Units ? 10 Nos 63A TPN SF Units - 10 Nos 32A TPN SF Units - 2 Nos Metering For Incomer Feeders : 0-500V Digital Voltmeter with Ph.selector switch and 3P MCB. 0-600A Digital Ammeter with resin cast CTs of ratio 600/5A, Class 1 Accuracy and 15VA burden and Ph.selector switch . LED Phase indication lamps with individuals MCB Protection. CT operated Multi Function meters with required resin cast CTs. Digital 3-Phase Energy Meter with CT?s.