Andhra Pradesh State Civil Supplies Corporation Limited Tender

Filling with carted gravel brought from outside earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) locally available good soil/earth

Providing Antitermite treatment as per IS 6315 (Part - 2) 2001 (Pre-constructional chemical treatment measures) along the internal & external vertical faces of the columns, plinth beams, basement and top surface of the basement filling below flooring bed as per the specified procedure conforming to IS 6315 (Part-2) 2001 and other relevant approved specification duly using Chlorpyriphos/ Lindane emulsifiable concentrate 20% with 1% concentration @ 7.5 Liters/ sqm of the vertical surface & @ 5.0 Liters/ sqm of the horizontal surface of the substructure to a depth of 500 mm around columns & 300 mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc & cost & conveyance of all materials to the site, cost of labour for spraying, rodding etc complete for finished item of work as per the approval of the Engineer-in-Charge

Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundation levelling courses and below flooring beds using 40mm size (SS5) hard Granite metal upto Plinth level from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) for:-Machine Mix-PCC (1:4:8) NOMINAL MIX

Supply and placing of the M-20 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for FOUNDATIONS, PLINTH, PEDESTALS, STEPS Design Mix : M-25 (Weigh Batch) Centering with Steel (retaining wall) For RCC Footings.

Supply and placing of the M-20 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for FOUNDATIONS, PLINTH, PEDESTALS, STEPS Design Mix : M-25 (Weigh Batch) Centering with Steel (retaining wall) For RCC Columns

Supply and placing of the M-20 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for FOUNDATIONS, PLINTH, PEDESTALS, STEPS Design Mix : M-25 (Weigh Batch) Centering with Steel (retaining wall) For RCC Plinth Beam

Supply and placing of the M-20 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for FOUNDATIONS, PLINTH, PEDESTALS, STEPS Design Mix : M-25 (Weigh Batch) Centering with Steel (retaining wall) For Lintels.

Supply and placing of the M-20 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for FOUNDATIONS, PLINTH, PEDESTALS, STEPS Design Mix : M-25 (Weigh Batch) Centering with Steel (retaining wall) For tiebeam @2.4m level height.

Supply and placing of the M-20 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for FOUNDATIONS, PLINTH, PEDESTALS, STEPS Design Mix : M-25 (Weigh Batch) Centering with Steel (retaining wall) For top tie beam @4.5m level height.

Supply and placing of the M-20 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for FOUNDATIONS, PLINTH, PEDESTALS, STEPS Design Mix : M-25 (Weigh Batch) Centering with Steel (retaining wall) For Gutter side wall @ 5.1m Height.

Supply and placing of the M-20 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for FOUNDATIONS, PLINTH, PEDESTALS, STEPS Design Mix : M-25 (Weigh Batch) Centering with Steel (retaining wall) For RCC Slab Over Rolling Shutter.

Random Rubble Stone Masonry in Cement Mortar (1:6) prop. Using other than granite stone including cost and conveyance of all materials to site of work, labour charges, Seigniorage, curing including all water leads etc., complete for finished item of work for Foundations and Basement.

Providing and laying of specified thickness of Site mix / RMC concrete flooring with VDF system , Concrete of M20 grade as per IS 4926:2003 with minimum cement content of 320 kgs per cubic meter as per IS 456 :2000 and standard Mix design as per IS 10262:1982 using 20mm graded hard broken granite metal from standard suppliers approved by the department and finishing the flooring with VDF system ( Vacuum Dewatering Flooring System ) with power trowel finish laser levelling etc complete including cost and conveyance of all materials to site like cement sand, floor hardener, cost of seignorage charges, taxes GST,and all operational, incidental charges, labour charges, pumping concrete, centering, laying concrete, compacting mechanically by using needle and surface vibrators/screed board vibrators,required slope and camber incl steel form work with sturdy MS Channel section, curing etc. complete for finished item of work. excluding cost of cement , including labour charges for using laying and spreading, of floor hardener labour charges as per manufacturer specifications including making provision for contraction /expansion construction and longitudinal joints 6mm wide 12mm deep by groove cutting machine providing and filling the joints with approved joint filler and polysulphide sealants complete as per direction of engineer in charge including providing plain dowel bars of required dia with MS sleeves tie bars where ever required for GRADE SLAB (panel size not more than 16 sqm over VDF flooring. at expansion joints the grooves size will be 6-25 width to full depth of flooring as per drg

50mm thick precast box section for windows

Providing High Yield Strength Deformed steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works ,manufactured by SAIL/VSP/ TATA, including labour charges for cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks, anti corrovisive paint, and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales tax and other taxes on all materials, lift charges, all tools and plant, hire charges on machinery, etc., complete for finished item of work in all floorsat all heights and levels as directed by engineer incharge

Brick masonry 230mm thick for panel walls in super structure with Cement Mortar (1:6) proportion (cement : sand) using light weight clay burnt bricks from approved source having minimum crushing strength of 35 Kg/Sq.Cm including cost and conveyance of all materials like sand, bricks, water etc. to site, cost of seigniorage charges and all other taxes on all materials, and all operational, incidental charges and labour charges like mixing cement mortar, scaffolding charges, lift charges, construction of masonry, curing etc., complete but excluding cost of Cement, for finished item of work as per specification and as directed by the engineer in charge.

Plastering 12 mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge/smooth finishing including cost and conveyance of all materials like sand, water etc., seigniorage charges, all types of taxes, GST,including supplying and fixing of the wire mesh at the RCC Msonry junctions during plastering, including all operational, incidental charges and labour charges for mixing mortar, finishing, scaffolding, lift charges, curing including cutting Grooves etc 12x12mm where ever necessary, complete for finished item of work for internal Surfaces of masonry Walls at all heights and levels in all floors, as directed by Engineer in charge

Plastering 20 mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement sand, water etc., seigniorage charges including all operational, incidental charges and labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, Including Supply, and fixing of the wire mesh at the RCC & Masonry Junctions during plastering including cutting Grooves 12x12mm where ever necessary etc., complete for finished item of work for External Surfaces of masonry Walls as directed by Engineer. at all heights and levels in all floors

Supply and fixing of Rolling Shutters fabricated from 18 gauge steel sheet and machine rolled with 75mm rolling centres with effecting\ve bridge depth of 12mm lath sections inter locked with malleable cast iron chips. The guides shall be either rolled or pressed channel sections 75mm and 25mm wide fitted necessary fittings and fixtures. The suspension shaft shall be formed from solid drawn 8 gauge seamless tubes of about 60mm O.D.in 3 segments coupled with 2 pairs C.I.dog-railed flange coupling forming one complete unit eliminating deflection in the centre to a minimum. The springs shall be of approved high tensile flat springs 50/60mm width and 1.6/1.8mm thickness hardened and tempered. These shall be fitted inside the fabricated housing of either ends which counter balance the shutter. The ball bearings shall be double row self aligning ball bearings fitted inside C.I.housing fixed on side brackets holding the suspension shaft at either end. The suspension of the shutter curtain shall be bolted on specially fabricated cages formed from M.S.flats and plates all are welded.The hood cover shall be made of The locking arrangements shall consist of hasp and staple on the bottom plate lockable from both sides. Rolling shutter shall be painted with one coat of red oxide zinc chromate paint confirming to I.S.2074 before they are fixed completed for finished item of work including cost and conveyance all materials , labour, taxes, GST, scaffolding and lift charges as per specifications and as directed. with mechanical device chain and crank operation for operating rolling shutter

Supllying and fixing od louvered type aluminium ventilators including all materials labour etc complete for finished item of work as per drg

supplying and fixing of stainless steel mosquito proof mesh of 304 grade including ss beading including vcost and conveyance of all materials to site, including all operational,incidental and labour charges, scaffolding and lift charges, all type of taxes, all type of tools and plant etc comple for finished item of work as dircted by the engineer incharge

Supply and fixing of powder coated Aluminium Ventilators "Z" Type of approved make and shade and as per the drawing using 40x40x3.5mm thick Aluminium L-Angle for main frame and using 5 mm thk plain glass fixed with Aluminium Beading 12.7 Sqmm x1.65 mm thk , and also providing the SS 304 grade fly proof mesh with 1.6mm x1.6mm perforated including conveyance of all materials, glass to site, all taxes on all materials, wastage, scaffolding charges, form work, lift charges, cost of consumables, incidental, operatinal and labour charges etc complete for finished item of work from all heights.

White washing two coats with Suryacem of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials

Painting to new walls with 2 or more coats of Acrylic Emulsion weather proof,water based, modified acrylic with Silicon Additives Exterior of superior grade premium 1st quality of approved brand and shade, of any colours and deisign having VOC content less than 50 grams/litre over primer coat using white cement as approved by Engineer-In-Charge, making 3 or more coats in all to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges, scaffolding charges, lift charges sales and all other taxes, curing etc.,complete for finished item of work as per direction of engineer incharge in all floor at all heights and levels (APSS 911) for External walls and in all floors and at all heights

Providing and applying painting to new iron work two coats with ready mixed synthetic enamel paint of premium 1st quality grade -1 having VOC content less than 50 grams/litre of approved brand and shade of any colours over one coat of red oxide primer coat (total 3 coats) including cost and conveyance of all materials to site like paint, puty, etc all, incidental qperational and labour charges, scaffolding chrages, lift charges, all sales and other taxes, etc for preparing and cleaning the surface of dirt with soap and brushes including putty etc complete for finished item of work at all heights in all floors and levels as directed by engineer incharge.

same as above with marking on flooring with 100mm wide strips with oil paint in three coats

Supplying providing and laying Rain Water Down take pipes with PVC/SWR pipes of approved make of 4kgs/sqcm confirming to is: 13592-1992 with necessary upvc pipe clips @ 1.5m intervals and jointed with solvent ceement including cutting of walls and floors and making the same good including necessary specials/ fittings such as PVC bends, shoes, iron clamps and all other accessories and fixing in position, including cost and conveyance of all materials to site all incidental operational and labour charges, scaffolding charges, lift charges sales and all other taxes, tools and plants curing etc complete for finished item of work as directed by engineer incharge in all heights and levels in all floors, including couplers clips bends and shoes etc

Supplying and fixing clear 4 mm thick Polycarbonate Sheets sky lightswith necessary self tapping screws, washers etc.,fixing firmly to the strutural steel frame work and consealing the joints with sealants etc., complete as per drg and as directed including cost and conveyance of all materials to site all operational incidental charges and labour charges all taxes, j bots and nuts washers tools and plants lifting charges, scaffolding charges etc at all heights and levels, complete for finished item of work as directed by engineer incharge

Supply & Fixing of Self Supported Arc Shaped Gal Valume sheeting, Color compying to ASTM A792, base metal thickness 1.00mm, alloy coating AZ 150 (Aluminium 55%, Zin 43.50% and Silicon 1.5%), Yield Strength: 350 MPA, Paint coating regular modified polyster top coat 12 microns epoxy, top color: Combination of Blue and Off White and bottom color grey using make of Thyssen Krupps, Germany / Donghu Steel Co. ltd., Korea / Corus Steels, U.K / Union Steel, Korea / Yieh Phui Enterprises Ltd., Taiwan. The Steel Sheet shall be 3'-0" (914MM) width which shall be curved and moulded at site using mechanical press and dies to the desired curves and shape to form 2'-0" (605MM) wide interlocking panels. These panels shall be erected in position and the joints are seamed. The installation should be done by mechanized Vendor has to mobilize required number of Hydra for transportation of sheets and Cranes for the erection of seamed sheets and complete the entire work satisfactorily by using the fixtures like anchor fasteners, standard light hangers, turbo ventilators and sky lights etc., complete as per terms and conditions etc. complet

gi barge as per drg

providing and fixing at desired location 4.5 kgs capacity ABC type fire extinguisher of ISI mark and approved brand

providing and fixing MS fire buckets as per instruction of site incharge rate to be inclusive of supporting arrangement and painting

providing and fixing CO2 Type fire extinguisher 4.5 kgs capacity as per instruction of site incharge

Supply and Fixing of Varandah Truss of 2.40 M c/c. span made up of 60.30mm OD (Medium) for Top & Bottom Rafters and all other members with 48.30mm OD (Medium) Mild Steel Pipes including Supply & Fixing of 16mm dia 450mm length MS holding down bolts one side threaded (4 Nos) with MS Cleats of size 150mm x 75mm x 10mm thick and as per the working drawings, including cost and conveyance of all materials, labour charges, one coat of red oxide etc., complete for finished item of work

Supply and Fixing of 6.00 M long with 50 x 50 x 4.65 mm MS Square Hollow Pipe for Purlin with side plates on either ends of size 75mm x 150mm x 6mm including cost and conveyance of all materials, labour charges for welding, fixing, one coat of red oxide, etc., complete for finished item of work.

Supply & Fixing of Color coated Galvalume Roofing Sheet thickness 0.50mm, with Guard Film (Tolerance as +-0.02mm) with alloy coating AZ 150 (Aluminum 55% Zinc 43.50% and Silicon 1.5%), Yield Strength: 550 MPA, paint coating Regular Modified Paint/Super Durable Paint top coat upto 25 microns and bottom coat 7-8 microns epoxy, and fixing to existing Trusses with EPDM Washers of 12/55 & 12/25 where applicable using Self Threading fasteners on existing trusses including transportation, taxes etc., complete for finished item of work