Andhra Pradesh State Civil Supplies Corporation Limited Tender

Refilling basement and sides of foundations with useful excavated soils including watering, ramming, complying with standard specifications for filling including all water leads and consolidation with iron roller including initial lead and lift etc., complete for finished item of work.

VRCC M-20 Nominal Mix (Cement fine aggregrate: coarse agrgreate) Corresponding to table 9 of IS 456 using 20 mm size graded machine crushed hard granite metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand) coarse aggregate, water etc., to site and including seigniorage charges, sales & other taxes on all materials including all operational charges such as machine mixing, laying , concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering etc., complete for finshed item of work For RCC Footings

VRCC M-20 Nominal Mix (Cement fine aggregrate: coarse agrgreate) Corresponding to table 9 of IS 456 using 20 mm size graded machine crushed hard granite metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand) coarse aggregate, water etc., to site and including seigniorage charges, sales & other taxes on all materials including all operational charges such as machine mixing, laying , concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering etc., complete for finshed item of work For RCC Columns

VRCC M-20 Nominal Mix (Cement fine aggregrate: coarse agrgreate) Corresponding to table 9 of IS 456 using 20 mm size graded machine crushed hard granite metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand) coarse aggregate, water etc., to site and including seigniorage charges, sales & other taxes on all materials including all operational charges such as machine mixing, laying , concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering etc., complete for finshed item of work For Plinth Beam Over Basement @ Basement Level

VRCC M-20 Nominal Mix (Cement fine aggregrate: coarse agrgreate) Corresponding to table 9 of IS 456 using 20 mm size graded machine crushed hard granite metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand) coarse aggregate, water etc., to site and including seigniorage charges, sales & other taxes on all materials including all operational charges such as machine mixing, laying , concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering etc., complete for finshed item of work For Lintels

VRCC M-20 Nominal Mix (Cement fine aggregrate: coarse agrgreate) Corresponding to table 9 of IS 456 using 20 mm size graded machine crushed hard granite metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand) coarse aggregate, water etc., to site and including seigniorage charges, sales & other taxes on all materials including all operational charges such as machine mixing, laying , concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering etc., complete for finshed item of work For Tie Beam @ 2.75 M Height Over Basement

VRCC M-20 Nominal Mix (Cement fine aggregrate: coarse agrgreate) Corresponding to table 9 of IS 456 using 20 mm size graded machine crushed hard granite metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand) coarse aggregate, water etc., to site and including seigniorage charges, sales & other taxes on all materials including all operational charges such as machine mixing, laying , concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering etc., complete for finshed item of work For Tie Beam @ 4.98 M Height Over Basement

PCC M-20 Nominal Mix (Cement fine aggregrate: coarse agrgreate) Corresponding to table 9 of IS 456 using 20 mm size graded machine crushed hard granite metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand) coarse aggregate, water etc., to site and including seigniorage charges, sales & other taxes on all materials including all operational charges such as machine mixing, laying , concrete, curing etc., complete for finished item of work, but including centering, shuttering etc., complete for finshed item of work For Bed Blocks

VRCC M-20 Nominal Mix (Cement fine aggregrate: coarse agrgreate) Corresponding to table 9 of IS 456 using 20 mm size graded machine crushed hard granite metal (Coarse aggregate) for Sunshades from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand) coarse aggregate, water etc., for sun shades wutg 100 thick at fixed end and 75 mm thick at free end of average thickness of 87.50 mm thick and plastering 12 mm thick in Cement Mortar (1:3) Prop. on all surfaces to site and including seigniorage charges, sales & other taxes on all materials including all operational charges such as machine mixing, laying , concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering etc., complete for finshed item of work For Sunshades.

Brick Masonry in Cement Mortar (1:6) prop; using 2nd class Bricks traditional size 23x11x7 cms for super structure including cost and conveyance of all materials, Seigniorage, labour charges, scaffolding, all leads & lifts, curing etc., complete for finished item of work (Upto 3.00 M Height over Basement)

Brick Masonry in Cement Mortar (1:6) prop; using 2nd class Bricks traditional size 23x11x7 cms for super structure including cost and conveyance of all materials, Seigniorage, labour charges, scaffolding, all leads & lifts, curing etc., complete for finished item of work (Above 3.00 M Height over Basement)

Filling Basement and Foundations with Gravel in layers of 15cms, watering, ramming including all water leads and consolidation including all leads and lifts, seigniorage etc., complete for finished item of work.

Providing Antitermite treatment as per IS 6315 (Part - 2) 2001 (Pre-constructional chemical treatment measures) along the internal & external vertical faces of the columns, plinth beams, basement and top surface of the basement filling below flooring bed as per the specified procedure conforming to IS 6315 (Part-2) 2001 and other relevant approved specification duly using Chlorpyriphos/ Lindane emulsifiable concentrate 20% with 1% concentration @ 7.5 Liters/ sqm of the vertical surface & @ 5.0 Liters/ sqm of the horizontal surface of the substructure to a depth of 500 mm around columns & 300 mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc & cost & conveyance of all materials to the site, cost of labour for spraying, rodding etc complete for finished item of work as per the approval of the Engineer-in-Charge

Flooring with Plain Cement Concrete (1:5:10) prop; using 40mm gauge hard broken granite metal 100mm thick and simultaneously laid 75mm thick PCC M-20 using 20mm size hard broken machine crushed granite metal chips and then polishsing the flooring with de watering machine including cost of polishing, transportation of machine, generator including, diesel oil etc., including all materials to site of work, labour charges, vibrator charges, seigniorage, curing etc., complete.

Plastering to Brick Masonry in two coats in 12mm thick. Base Coat in CM (1:5) prop; 8mm thick and Top Coat in CM (1:3) prop; 4mm thick with sponze finishing including cost and conveyance of all materials, labour charges, scaffolding charges, lift charges, curing, water leads, Seigniorage etc., complete for finished item of work (Upto 3.00 M Height over Basement)

Plastering to Brick Masonry in two coats in 12mm thick. Base Coat in CM (1:5) prop; 8mm thick and Top Coat in CM (1:3) prop; 4mm thick with sponze finishing including cost and conveyance of all materials, labour charges, scaffolding charges, lift charges, curing, water leads, Seigniorage etc., complete for finished item of work (Above 3.00 M Height over Basement)

Plastering with CM 2 coats, 20mm thick, basecoat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing including cost and conveyance of all materials, labour charges, scaffolding charges, lift charges, curing, water leads, seigniorage etc., complete for finished item of work.

Painting two coats with best synthetic enamel paint (Asian make) of approved colour to new iron work without primer coat including cost and conveyance of all materials to site of work, labour charges, scaffolding charges etc., complete for finished item of work.

White washing two coats with best quality surya cem including cost and conveyance of all materials, labour charges, blue, brushes etc., complete for finished item of work.

Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labourcharge etc,. complete including contractors profit and over head charges etc complete.

Manufacturing, Supplying and Fixing in position of 0.76 M x 0.76 M size Mild Steel Air Inlets with MS Angles having two frames of outer and inner side. The outer side frame is with 40 x 40 x 5 mm MS Angle with 12mm Square Rods @ 75mm c/c in both the ways (9 Nos. on each side) with alternative joints welded and a wire mesh welded to this frame of 25 x 25 x 25 x 3mm Z Angle with two glazed shutters frame of suitable angles including cost and conveyance of all materials and accessories, required such as hold fasts, tower bolts, wind appliances, packing for glass including labour charges for finished item of work including one coat of red oxide primer etc., complete as per the drawing and as directed by the Officer-in-charge of the work.

Manufacturing, Supplying and Fixing in position 0.92 M x 0.46 M size Rotating Type Ventilators having two frames of outer side and inner side. The outer side frame with 40 x 40 x 5mm MS Angle fixed with 2 Nos. of 12mm Square Rods horizontally and 24 x 12 gauge wire mesh fixed to this frame from outside with 35 x 4mm MS Flat. The inner side frame of 25 x 25x 25 x 3mm Z Angle with rotating glazed frame fixed to inner frame with central pivoting arrangements including cost and conveyance of all materials required for the work, labour charges etc., complete for finished item of work including one coat of red oxide primer etc., complete as per the drawing and as directed by the Officer-in-charge of work.

Tor Steel Reinforcement, Wrought and Put up including decoiling, bending, cranking, tying them after placing them in position as directed by Engineer-in-charge of work, including cost and conveyance of steel, binding wire etc., complete for all works for all heights.

Supply & Fixing in position (inside opening) Rolling Shutters with guides for a clear opening of 2.45 M x 2.75 M of push and pull type of approved quality and design and as per ISI specifications with guaranteed 20 gauge and 75mm wide inter locking block steel of deep converse corrugation with single piece of sheet and balanced with steel pipe shaft including pressed steel bottom rail brackets, suspension shaft, top rolling spring including supply and fixing top cover with 1mm thick MS sheet providing necessary clamps, hold fasts including all other necessary fixtures with CM (1:3) prop; etc., complete for finished item of work for Rolling Shutters including 2 Nos. of Side Locks, 1 No. Middle Lock including one coat of red oxide of primer etc., complete for finished item of work.

Supplying and Fixing of louvered type aluminium windows including all materials labour charges etc., complete for finished item of work

Supplying and Fixing of 600mm dia turbo ventilators as per approved manufacturer specifications including cost of all materials to site all incidental operational and labour chargegs, all types of taxes, scaffolding and lift charges, all types of tools and plants etc complete for finished item of work as directed by engineer incharge material shall be approved by the engineer incharge

Supply & Fixing of Self Supported Arc Shaped Gal Valume sheeting, Color compying to ASTM A792, base metal thickness 1.00mm, alloy coating AZ 150 (Aluminium 55%, Zin 43.50% and Silicon 1.5%), Yield Strength: 350 MPA, Paint coating regular modified polyster top coat 12 microns epoxy, top color: Combination of Blue and Off White and bottom color grey using make of Thyssen Krupps, Germany / Donghu Steel Co. ltd., Korea / Corus Steels, U.K / Union Steel, Korea / Yieh Phui Enterprises Ltd., Taiwan. The Steel Sheet shall be 3'-0" (914MM) width which shall be curved and moulded at site using mechanical press and dies to the desired curves and shape to form 2'-0" (605MM) wide interlocking panels. These panels shall be erected in position and the joints are seamed. The installation should be done by mechanized Vendor has to mobilize required number of Hydra for transportation of sheets and Cranes for the erection of seamed sheets and complete the entire work satisfactorily by using the fixtures like anchor fasteners, standard light hangers, turbo ventilators and sky lights etc., complete as per terms and conditions etc. complete

Supplying and fixing clear 4 mm thick Polycarbonate Sheets sky lightswith necessary self tapping screws, washers etc.,fixing firmly to the strutural steel frame work and consealing the joints with sealants etc., complete as per drg and as directed including cost and conveyance of all materials to site all operational incidental charges and labour charges all taxes, j bots and nuts washers tools and plants lifting charges, scaffolding charges etc at all heights and levels, complete for finished item of work as directed by engineer incharge

Supply and Fixing of 110mm dia ISImark PVC 4 kg/cm2 rain water spouts of 2.5mm thick including cost of necessary PVC bends, shoes and pvc clamps and all other accessories and fixing in position including cost and conveyance of all materials to site, sales and other taxes on all materials, all operational, incidental and labour chargers such as fixing in alignnmnet etc., complete for finished item of work (APSS NO 1328)

providing and fixing at desired location 4.5 kgs capacity ABC type fire extinguisher of ISI mark and approved brand

providing and fixing MS fire buckets as per instruction of site incharge rate to be inclusive of supporting arrangement and painting

Providing and fixing CO2 Type fire extinguisher 4.5 kgs capacity as per instruction of site incharge

Supply and Laying of 25mm dia 2.00mm thick PVC pipe ISI mark of Sudhakar / Maco Plast / Modi make concealed in WALLS with all required PVC / Metallic Deep Boxes including masonary work and labour charges etc., complete including masonary work, including cost and conveyance of all material, all labour charges, including contractors profit and over head charges etc complete but excluding cost of VAT for finished item of work

Wiring with 2 runs of 22/0.3mm (1.5 Sq.mm) P.V.C. insulated F.R flexible copper cable (ISI MARK) in existing pipe with 6A /10 A 1 way modular switch, with required modular box Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Residential Buildings.

Supply and Fixing of 36/40 Watts Flourescent Street Light luminarie with sheet steel Aluminium and UV stablilized acrylic cover etc., completed fitting with 'U' clamps including cost and conveyance of all materials, labour charges etc., complete for finished item of work.

Supply and Fixing 36/40 Watts Patty Type Tube Light luminare power coated CRCA sheet housing with copper choke, and all standard accessoires of Wipro/GE/Philips make etc., fixing to walls etc., including cost of materials, labour charges etc, complete for finished item of work.

Supply and run of 2 of 22/0.3mm (1.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.

Run off 10 square mm gauge weather proof twin core Aluminum cable along with GI barrier wire etc., including cost and conveyance of all materials, labour charges etc., complete for finished item of work.

Providing Independent Earthing to single-phase board, with 2.50 RM 40 mm dia GI pipe with copper plate with 4 Nos. of GI bolts and nuts and washers, drilling of 12 dia holes of numbers , 20 Kg salt, 40 Kg hard coke ,with an earth work excavation of 1.50M x 0.60 M x 0.90M depth including, screws, nails, bour charges etc., complete for finished item of work.

Supply and fixing with 6A, 3 pin / 2 pin wall plug point with switch (Kosala / K ) make including cost and conveyance of materials, labour charges etc. complete for finished item of work.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete including contractors profit and over head charges etc complete but excluding cost of VAT for finished item of work for light, bell, fan and exhaust fan points in Non-Residential Buildings

S&F of MCB 16 Amps heavy duty forceline fuse carriers with Double pole ion clad (DPIC) switch fixing on metal concealed 8”x10” board including cost of Hylum sheet with screws including all materials, labour charges etc., complete for finished item of work

Supply & Fixing of bulk headed fitting made up with Aluminium casting with 100 Wattes bulb including cost and conveyance of all materials, labour charges etc., complete for finished item of work.

Providing Name Board on Godown Wall a required height for the size of 3.50 M x 1.50 M duly applying two coats of synthetic enamel paint of base surface and writing the letters of required size with Synthetic Enamel Paint in Telugu and English version

Providing U Channel of ISMC 150 of 75 x 150 x 75 x 9.00 mm thick is provided with 16 mm dia 600 mm long 3" threaded and other end welded with Ms plate and providing washers, nuts etc., complete for finished item of work.

Cubes Testing Reports should be submitted duly consulting with the respective Engineering Department along with the certificates for the following spells of works a)Footings, b) Plinth Beam, c)Columns d)Tie Beam etc.,

Third Party Analysis Report should be produced for every bill

(Rupees Forty One Lakhs Seventy Three Thousand Four Hundred Forty and Forty One only)