Andhra Pradesh Medical Services And Infrastructure Development Corporation Tender
... More
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Andhra Pradesh Medical Services And Infrastructure Development Corporation - APMSIDC Tender
Civil And Construction
Building Construction
Opening Date24 Apr 2025
Closing Date8 May 2025
Tender Amount₹ 3,92,50,706
Costs
EMD
₹ 3,93,000Document Cost
Refer DocumentsTender Fee
₹ 14,750
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
804234Tender No
1-1/APMSIDC/Technical/2025-26, Dt.04.04.2025Tender Authority
Andhra Pradesh Medical Services And Infrastructure Development Corporation ViewPurchaser Address
-Website
http://http://msidc.ap.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Executive Engineer duly taking actual premeasurements before dismantling including all labour charges , overheads & contractor profit etc., complete Reinforced cement concrete
10
3650
36500
... More
Supply and placing of the Design Mix Concrete M 30 grade corresponding to IS 456 with cement content of 400 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood posts, wall plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Lintels: Second Floor :
1.05
15892
16687
... More
Supply and placing of the Design Mix Concrete M 30 grade corresponding to IS 456 with cement content of 400 kgs per 1 cum of concrete using using batching and mixing plant of 15 cum per hour capacity with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site, centering using casurina ballies , bamboos , wooden reapers , runners , wood posts , wall plates etc., for 45cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically laying concrete, curing, overheads & contractors profit complete etc., but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402, 403 & 903) Second Floor
30
474
14220
... More
Masonry work in CM(1:6) prop (Cement : Sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 & 504). Second Floor
232.65
8034
1869110
... More
Reinforced Masonry for partition walls (100 mm thick) in CM (1:4) prop. (Cement : Sand) using fly ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50 Kg/Sq.cmand placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water etc., to site, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., and overheads & contractors profit but excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No. of 509) Second Floor :
241.85
1086
262649
... More
Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site including all charges for machine mixing, hire charges of concrete mixer, centering charges, laying concrete in position, curing etc., & lift charges , and overheads & contractors profit for bed blocks & hold fasts for finished item of work. (APSS No. 402) Second Floor
0.5
7676
3838
... More
Plain Cement Concrete (1:2:4) using 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site including all charges for machine mixing, hire charges of concrete mixer, laying concrete in position, curing etc., & lift charges , and overheads & contractors profit for septic tank bed, in sunken slabs for finished item of work. (APSS No. 402) Second Floor :
59
7580
447220
... More
Reinforced Cement Concrete M 20 nominal mix using 12mm size hard granite machine crushed graded metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using a minimum quantity of 330 kgs. of cement per 1 cum of concrete using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site including centering, shuttering, labour charges such as weigh batching, machine mixing, hire charges of concrete mixer, laying concrete, lift charges, curing etc., and overheads & contractors profit complete for finished item of work (APSS No. 402 & 403) for sill slabs. Second Floor :
4.3
10327
44406
... More
Reinforced Cement Concrete M 20 nominal mix using 12mm size hard granite machine crushed graded metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using a minimum quantity of 330 kgs. of cement per 1 cum of concrete using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site including centering, shuttering, labour charges such as weigh batching, machine mixing, hire charges of concrete mixer, laying concrete, lift charges, curing etc., and overheads & contractors profit complete for finished item of work (APSS No. 402 & 403) for 25mm thick platforms / lofts: Second Floor
20
451
9020
... More
Reinforced Cement Concrete M 20 nominal mix using 12mm size hard granite machine crushed graded metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using a minimum quantity of 330 kgs. of cement per 1 cum of concrete using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site including centering, shuttering, labour charges such as weigh batching, machine mixing, hire charges of concrete mixer, laying concrete, lift charges, curing etc., and overheads & contractors profit complete for finished item of work (APSS No. 402 & 403) for 50mm thick platforms / lofts: Second Floor
50
662
33100
... More
Providing Thermo Mechanically Treated (TMT) (Fe 500 / Fe 500 D grade as per IS 1786-1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and overheads & contractors profit complete for finished item of work.( APSS No.126) Second Floor
5
91426
457130
... More
Providing Mild steel (MS) steel bars (Fe 250 grade as per IS 432) of different diameters including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and overheads & contractors profit complete for finished item of work.( APSS No.126) Second Floor
0.25
89040
22260
... More
Plastering 12mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904) Second Floor
4850
514
2492900
... More
Specialised high performance acrylic polymer modified elastomeric cementitious water proofing system coating to the wet area / tiolet / bath room: a ) First Layer - Supply and Apply penetrative cum bonding primer as base primer cum sealer coat using MIXPRIME AC100 or equivalent modified with water and cement at the ratio 2:1:3 (MIXPRIME AC 100 : water : cement) by volume with a slow speed mixer machine. This compound shall be applied with sufficient thickness to cover the holes/pores/cracks @ 1.000 Liter / SQM (0.350 Lt of MIXPRIME AC100 / SQM) and the raw primer should be complain with ASTM 4541 and the Solid content 49% +2%
b ) Second Layer – Supply and apply of 2 x 2 mm welded with alkaline resistant coated / non-woven 40 Gsm verging fiber mesh MIXMAT GFM 50 or equivalent for a minimum over lap of 100 mm embedded in the primer coat
c ) Third Layer - Supply and apply of first coat of two component (Powder + Liquid) system of high performance acrylic polymer modified elastomeric cementitious waterproofing system MIXGUARD AC or equivalent @ 1.000 Kg / SQM ( mix the powder and liquid with the help of a slow speed mixer for a period of 2 to 3 minutes up to get a homogeneous mix- dilution or modification not recommended) should be complain with BS 1881 Part 5 1983 (ISAT 476 Part 6), DIN 1048 Part 5 1991, BSEN 12390-8 2000, ASTM D 412-92
d ) Fourth Layer –Supply and apply of second coat of two component (Powder + Liquid) system of high performance acrylic polymer modified elastomeric cementitious waterproofing system MIXGUARD AC or equivalent @ 1.000 Kg / SQM ( mix the powder and liquid with the help of a slow speed mixer for a period of 2 to 3 minutes up to get a homogeneous mix- dilution or modification not recommended) should be complain with BS 1881 Part 5 1983 (ISAT 476 Part 6), DIN 1048 Part 5 1991, BSEN 12390-8 2000, ASTM D 412-92.
Note: -
1 ) No dilution or modification recommended for item Nos.b,c,d and e .
2 ) All materials should be procured as per the consumption with respect of the work order.
3 ) The application should be carried out by an approved agency.
4 ) The contractor should provide 5 years material warrantee from the Manufacturer and 5 year warrantee from the applicator or combined
Second Floor
268.9
616
165642
... More
Granolithic Concrete flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine crushed metal and screened sand laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m x 1.50 m, using glass strips and finishing the top surface to required smoothness and slopes and thread lining including cost of all materials like cement, metal sand and water and overheads & contractors profit complete for finished item of work. (APSS No.701 & 710) Second Floor
216.55
553
119752
... More
Supply and application of epoxy flooring of light green or light blue colour in Operation Theatres and labour rooms - SIKA Epoxy seamless joint free finish with 3mm thickness and anti slip & water washable chemical resistance durable and non particle shedding with attractive finishing including cost and conveyance of all materials and all labour charges, overheads and contractor profit etc., complete for finished item of work in all floors. Second Floor
216.55
1341
290394
... More
Supply and application of epoxy coving with SIKA brand with 50mmx50mm width at the corners of the all walls in Operation Theatres, labour rooms including cost and conveyance of all materials and labour charges, overheads and contractor profit etc., complete for finished item of work . Second Floor
44.9
585
26267
... More
Filling with light weight concrete in Cement Concrete (1:5:10) proportion using brick jelly for low roofs including cost and conveyance of all materials like cement, sand, brick bats etc., to site including cost of all labour charges for laying concrete, ramming, curing , overheads & contractors profit etc., complete for finished item of work. (APSS. No. 402) Second Floor
30.1
5860
176386
... More
Flooring with non-skid red or white full body Ceramic floor tiles of size 300 mm x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water and tiles etc., and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707) Second Floor :
150.4
1188
178675
... More
Flooring with non-skid Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707) Second Floor :
1285.45
1478
1899895
... More
Providing 18 mm to 20 mm thick Anti-skid Granite (Black) up to 2.43M (Stair case) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, full rounding the edges of treads , providing 3 grooves of size 2mm x 1mm for the full length of treads , polishing charges, cost of base coat and overheads & contractors profit complete for finished item of work for Treads and Risers (S.S.701 & special) Treads of 0.30m wide : Second Floor :
15
5410
81150
... More
Providing 18 mm to 20 mm thick Anti-skid Granite (Black) up to 2.43M (Stair case) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, full rounding the edges of treads , providing 3 grooves of size 2mm x 1mm for the full length of treads , polishing charges, cost of base coat and overheads & contractors profit complete for finished item of work for Treads and Risers (S.S.701 & special) Risers of 0.15m Height : Second Floor :
7.5
3566
26745
... More
Providing skirting 10 cm height with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm of any colour and finish in all shades and designs, length equal to flooring tiles, flushed to wall surface to set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,and overheads & contractors profit complete for finished item of work.(APSS No.701 &707) Second Floor :
393.3
147
57815
... More
Providing dadooing with glazed full body porcelain wall tiles of size 300mm x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved pattern as approved by Engineer-in-Charge flushed to wall surface set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and overheads & contractors profit complete for finished item of work. Second Floor :
1209.5
1436
1736842
... More
Providing skirting to internal walls 10 cm height with Galaxy Grinate 18-20 mm thick upto 2.43M (Premium Quality) other than black and regular colours, length equal to flooring slabs set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and overheads & contractors profit complete for finished item of work. Second Floor :
24.5
434
10633
... More
Providing window sills with 18 mm to 20 mm thick Telephone Black Granite upto 2.43M as approved by the Engineer-in-Charge set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edge , polishing charges, cost of base coat and overheads & contractors profit complete for finished item of work (S.S.701 & special) Second Floor :
22.7
5862
133067
... More
Providing 18 mm to 20 mm thick Telephone Black Granite upto 2.43M as approved by the Engineer-in-Charge set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand, water, granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edge, polishing charges, cost of base coat and overheads & contractors profit complete for finished item of work. for Platforms : Second Floor :
60.65
4386
266011
... More
Providing cladding to walls with Galaxy Grinate 18 mm to 20 mm thick up to (2.43 M) premium quality other than black and regular colours, length equal to flooring slabs set over base coat of CM(1:3) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and overheads & contractors profit complete for finished item of work. Second Floor :
9.45
4169
39397
... More
Providing dadooing with glazed red or white full body ceramic wall tiles of size 300mm x 450 mm / 320mm x 400mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge flushed to wall surface set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and overheads & contractors profit complete for finished item of work. Second Floor :
554.4
763
423007
... More
Supplying and fixing of stainless steel (grade 304) hand railing as per approved drawing with top rail of 50mm dia pipe and 2mm thick medium class and vertical posts of 25mm dia and 1.6mm thick medium class 1 No for each step fixed with base plate of 25mm dia using bonding agent and anchor fastner and welding, drilling of 25mm dia holes with pneumatic compressor for fixing railing, buffing, polishing all members of the railing thouroughly, lacquer finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges , overheads & contractors profit etc., complete for finished item of work. Second Floor
9.1
4033
36700
... More
Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1993 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall top coat including overheads and contractor profit etc., complete for finished item of work Second Floor
1440.4
1264
1820666
... More
Supply and fixing of doors as per approved drawings with medium teak wood frame of section 100mm x 65 mm with split type fan light of 500mm at the top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak Wood beading and 2 Nos. of 10mm MS Square bars and ISI marked flush door shutter of 30mm thick double shutters with bond wood solid block board type core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides, including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc, including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1200mm x 2600mm)
40.55
4835
196059
... More
Supply and fixing of doors as per approved drawings with medium teak wood frame of section 100mm x 65 mm with split type fan light of 500mm at the top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak Wood beading and 2 Nos. of 10mm MS Square bars and ISI marked flush door shutter of 30mm thick single shutter with bond wood solid block board type core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides and fixing 1mm thick mat finish laminated sheet to full width and height of the flush shutter both sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 3 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150mm long handles (IS:208), 1 No. door stopper and 1 No. Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc, including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1000mm x 2600mm)
96.2
5566
535449
... More
Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65mm and ISI marked flush door shutter of 30mm thick single shutter with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of medium teak wood door frame, flush shutter, including suply and fixing 6 Nos. MS Z hold fasts of size 300mm x 40mm x 5mm including ISI marked Aluminium fixtures 3 Nos. butt hinges (IS:205) of 150mm long, 1 No. aldrop (IS:2681) 250 mm long, 1 No. tower bolt (IS:204) of 150 mm x 10mm dia, 2 Nos. 125mm long handles (IS:208),1 No. Rubber / Nylon door stop bushes including PVC door cladding 1.50mm thick to the flush doors shutters pasted with Fevicol complete as per direction of Engineer –in – charge, manufacturers specification and drawing to full height of the shutter inside including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002. (The vertical frame of door shall be embedded in flooring for deth of not less than 10mm) (800mm x 2100mm)
10.1
5660
57166
... More
Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65mm and ISI marked flush door shutter of 30mm thick single shutter with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of medium teak wood door frame, flush shutter, including suply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 3 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150mm long handles (IS:208), 1 No. door stopper and 1 No. Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc, including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1050mm x 2100mm)
4.4
5566
24490
... More
Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM). coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb Kraft paper used to give the required rigidity and effective acoustic insulation with 6” Tower bolt – 2 Nos., 6” D handles – 2 Nos., 10” Aldrops – 1 No., Butt Hinges – 6 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws including overheads and contractor profit etc., complete for finished item of work for Double leaf Door For size 1800mmx2600mm
18.7
12498
233713
... More
Supplying and fixing single side prelam solid panel PVC door frame (Choukhat): Providing and fixing factory made Pac single side Prelam door frame of the size 50x7 mm with a wall thickness of 5mm, made out of extruded 5mm rigid Pac single side prelam sheet, meter cut at two corners and joined with 2 Nos. of 150mm long brackets of 15 x 15mm MS Square tube. The two vertical door profiles are to be reinforced with 19 x 19mm MS. square tube of 19 guage. The door frame shall be fixed to the wall using 65/100mm long MS. Screws through the frame by using Pac fasteners. a minimum of 4 Nos. of screws to be provided for each vertical member and minimum 2nos. for horizontal member etc. complete as per manufacture specification and direction of Engineer-incharge including conveyance of all materials, labour charges for fixing, overheads & contractors profit complete for finished item of work in all floors for door of size 800mm x 2100mm.
185
886
163910
... More
Providing and fixing 30mm thick factory made moulded door shutter- wood free consisting of frame made out of MS. tubes 19gauge thickness and size of 25mmX25mm for styles, top and bottom rails. MS. Frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick high density EPS conforming to IS 4671-1984 bounded with 2mm thick termite proof, water proof and fire resistant moulded Pac sheet with 2,4,6 raised panel design in different plain and / or pre-lam colours after routing to the moulded design on one side and 2mm plain and / or pre-lam Pac sheet on other side of the EPS. The edge of panel to be sealed with lipping of 10mm wide PVC sheet bottom (made by sticking 2 rigid foam sheet of 5mm thickness using Pac solvent cement) and stiles sides 25mm(5mmX5) thick and 30mm width Pac sheet fitted along MS tube for lock provision for lock height 5mm thick Pac sheet of size 150mmX100mm fixed with upper and lower face of inner side of EPS panel etc., complete as per direction of Engineer – in-Charge, manufacture specification and drawing including ISI marked Aluminium fixtures 3 Nos. butt hinges (IS:205) of 150mm long, 1 No. aldrop (IS:2681) 250 mm long, 1 No. tower bolt (IS:204) of 150 mm x 10mm dia, 2 Nos. 125mm long handles (IS:208),1 No. Rubber / Nylon door stop bushes including labour charges for fixing the shutter to frame etc., including overheads & contractors profit complete for finished item of work for door of size 800mm x 2100mm
53.15
3853
204787
... More
Providing and fixing factory made uPVC white colour sliding glazed window comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension
82.7
9979
825263
... More
Providing and fixing factory made uPVC white colour fixed glazed Ventilators comprising of uPVC multi chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket,G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profileof frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealant. Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But, no extra payment on this account shall be made. Fixed windows / Ventilators made of (small series) frame 47 x 50mm & mullion 47 x 68 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension.
55.8
7335
409293
... More
Supplying and fixing of Fixed Louvered Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, The section for louvered ventilators should be of of 33 x 56 mm Box section paneled with 4 mm pinhead glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket . corner brackets made of CRCA with Zinc Phosphate. The frames to be fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch including cost cost and conveyance of all materials, labour charges for fixing, overheads and contractors profit etc., complete for finished item of work in all floors.
8.75
5811
50846
... More
Supplying and fixing of MS doors, grill to windows, ventilators using MS angles, flat, square bars including cost and conveyance of all materials, cutting, bending, welding, all operational charges, labour charges, overheads and contractor profit etc., complete for finished item of work.
1500
124
186000
... More
White washing two coats with white cement to ceiling to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials , labour charges and incidental such as scaffolding , lift charges etc., and overheads & contractors profit complete for finished item of work in all floors.
1500
55
82500
... More
Providing and applying Wall putty of White Cement or Polymer or Cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, over heads and contractors profit etc., complete for finished item of work in all floors for internal walls
2450
247
605150
... More
Supply & application of one coat water based cement primer of interior grade I and two coats of synthetic polymer luxury plastic emulsion paint of superior grade having VOC (Volatile Organic Compound) content less than 50 grams/litre for internal walls including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.
4850
252
1222200
... More
Painting to new wood work and flush shutters with lappam finish, over a primary coat and painting two coats of synthetic enamel paint Grade-I VOC (Volatile Organic Compound) content less than 50 grams/litre of approved shade including cost and conveyance of all materials to site cost of primer coat and all labour charges etc. complete including applying sand paper on lappam coats for neat finish and overheads & contractors profit complete in all floors (APSS No.1200, 1207 & 1211).
59.2
257
15214
... More
Painting two coats with synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre over primer coat of red oxide to new iron work including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).
104.3
226
23572
... More
Supplying and fixing of SWG Gully traps 150mm x 100mm of ISI make confirming to IS 651 & 4127 with C.I grating & constructing cement brick masonry in CM (1:6) prop., intermediate chamber and fitted with 304.8 mm X 288.6 mm (12"x9") C.I Frame with hinged cover of standard make as approved including cost and conveyance of all materials to site, labour charges, overheads & contractors profit etc., complete for finished item of work.
5
606
3030
... More
Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber upto 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg including cost and conveyance of all materials like cement, sand, bricks, water etc., to site and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing , overheads & contractors profit etc., complete for finished item of work as per Standard specification.
5
4079
20395
... More
Supplying and fixing of 4" (101.6mm) multi floor trap with jali - UPVC/SWR pipe fittings as per site requirements with standard practice for all floors including cost and conveyance of all materials to site, labour charges , overheads & contractors profit etc., complete for finished item of work.
52
151
7852
... More
Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of white glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern with internal components and fixed using required size of nails and screws, angle stop cock 12.70mm dia. first quality Indian make heavy duty, 12mm PVC connections with brass union nuts CP coated including cost and conveyance of all materials to site, overheads & contractors profit etc., complete for finished item of work for all floors.
29
5592
162168
... More
Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap, ISI marked and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, angle stop cock 12.70mm dia. first quality Indian make heavy duty, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges, overheads & contractors profit etc., complete for finished item of work.
5
4783
23915
... More
Supplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , angle stop cock 12.70mm dia. first quality Indian make heavy duty, 31.75mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work
25
2705
67625
... More
Supplying and fixing of stainless steel sink of size 914.4 mm x457.2mm, 1mm thick of Indian make fixed on cantilever brackets including supply and fixing 31.75mm C.P. waste coupling, 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality ncluding chiselling brick masonry wall and making good & restoring to original surfaces overheads & contractors profit complete.for finished item of work in all floors.
1
8389
8389
... More
Supplying and fixing of stainless steel sink of size 508.00mm x 457.2mm x 203.20mm, 1mm thick of Indian make fixed on cantilever brackets including supply and fixing 31.75mm C.P. waste coupling, 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality ncluding chiselling brick masonry wall and making good & restoring to original surfaces , overheads & contractors profit complete for finished item of work in all floors
9
6060
54540
... More
Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make , 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit complete for finished item of work for all floors.
2
1499
2998
... More
Supplying and fixing of 16mm to 20 mm thick polished marble slab partitioins of size 4' 0" x 2' 0" for urinals including full rounding the edges , fixing in position, polishing, including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work for all floors.
1
2480
2480
... More
Supplying and fixing NP soap dish heavy type of approved make ISI quality with NP screws etc., complete including cost and conveyance of all materials, labour charges for fixing , overheads & contractors profit for finished item of work in all floors
24
267
6408
... More
Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
24
610
14640
... More
Supplying and fixing of 25.4mm dia, 609.6mm long aluminium anodized towel rods with brackets and aluminium screws including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work.
24
199
4776
... More
Supplying and fixing NP bib taps of size 12.70mm dia of Indian make heavy duty (short body) as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges , overheads & contractors profit complete for finished item of work in all floors.
2
292
584
... More
Supplying and fixing NP bib taps of size 12.70mm dia of Indian make heavy duty (long body) as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges , overheads & contractors profit complete for finished item of work in all floors.
26
450
11700
... More
Supplying and fixing steel surgical long elbow action handle 12.7mm dia bib cock as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges , overheads & contractors profit complete for finished item of work in all floors.
4
1075
4300
... More
Supply & fixing bib cock cum health faucet with 1 m long flexible tube and wall hook of Jaquar make queen series Chrome plated with 7 years warranty including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work.
29
4733
137257
... More
Supply & fixing F12.7x 152.0 mm NP shower rose heavy including cost and conveyance of all materials and all labour charges, overheads & contractors profit complete for finished item of work for all floors.
9
210
1890
... More
Supply & fixing Wall Mixer with provision for overhead shower and 115mm long bend pipe with wall flange Jaquar make Continental series, Chrome finish with 7 years warranty including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work.
9
4480
40320
... More
Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels. 22.20mm OD pipe
280
225
63000
... More
Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels. 28.60mm OD pipe
180
278
50040
... More
Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels. 34.90mm OD pipe
130
365
47450
... More
Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels. 41.30mm OD pipe
50
498
24900
... More
Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels. 54.00mm OD pipe
20
682
13640
... More
Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS-778 Class - I, Indian make heavy type including cost and conveyance of all materials, labour charges, overheads & contractors profit complete for finished item of work. 20mm Nominal bore
10
938
9380
... More
Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS-778 Class - I, Indian make heavy type including cost and conveyance of all materials, labour charges, overheads & contractors profit complete for finished item of work. 25mm Nominal bore
35
1339
46865
... More
Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS-778 Class - I, Indian make heavy type including cost and conveyance of all materials, labour charges, overheads & contractors profit complete for finished item of work. 32mm Nominal bore
30
2022
60660
... More
Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS-778 Class - I, Indian make heavy type including cost and conveyance of all materials, labour charges, overheads & contractors profit complete for finished item of work. 40mm Nominal bore
8
2737
21896
... More
Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS-778 Class - I, Indian make heavy type including cost and conveyance of all materials, labour charges, overheads & contractors profit complete for finished item of work. 50mm Nominal bore
4
4005
16020
... More
Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/ Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326) 75mm dia
270
193
52110
... More
Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/ Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326) 110mm dia
280
274
76720
... More
Construction of brick masonry support for GI pipe of size 304.80mm x 228.60mm x 228.60 mm in CM (1:8) prop including plastering and finishing with 12mm thick in CM (1:5) including cost and conveyance of all materials and all labour charges, overheads & contractors profit complete for finished item of work for all floors.
8
94
752
... More
Supply & Fixingof Robe hook with 7 years warranty:Chrome plated including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work.
3
1025
3075
... More
Supply & Fixing of Towel ring Jaquar make Queen series with 7 years warranty: Ivory Gold including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work.
8
2252
18016
... More
Supplying and fixing of Angular cock size 12.70mm dia of Indian make heavy duty including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work.
10
529
5290
... More
Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/ Kisan/Supreme or any ISI brand) 6 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326) 160mm dia
80
677
54160
... More
Supply and Fixing of 25mm outer dia (1.60 to 1.80)mm thicknes medium grade with IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) concealed in wall with all required MS junction boxes and all accessories including masonary work for run of mains including all labour charges etc., complete. Makes : Precision/Universal& Marudhar/VIP/ GoldMedal / Million plast / GM /Sudhakar / Polycab/Anchor/ Polyline/Orbit/AKG/Beljin/Vasavi/DEC
450
134
60705
... More
Supply and Fixing of 25mm outer dia (1.60 to 1.80)mm thicknes medium grade with IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) concealed in wall with all required MS junction boxes and all accessories including masonary work for light, bell, fan, and separate plug point with hot dip galvanized 20/18 SWG MS modular metal switch box with earthing terminal including all labour charges etc., complete. Makes : Precision/Universal& Marudhar/VIP/ GoldMedal / Million plast / GM / Sudhakar /Polycab/Anchor/ Polyline/ Orbit/AKG/Beljin/Vasavi/DEC
450
141
63765
... More
Supply and Fixing of 32mm outer dia (1.90 to 2.10)mm thicknes medium grade with IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) concealed in wall with all required MS junction boxes and all accessories including masonary work for light, bell, fan, and separate plug point with hot dip galvanized 20/18 SWG MS modular metal switch box with earthing terminal including all labour charges etc., complete. Makes : Precision/Universal& Marudhar/VIP/ GoldMedal / Million plast / GM / Sudhakar /Polycab/Anchor/ Polyline/ Orbit/AKG/Beljin/Vasavi/DEC
200
174
34880
... More
Supply and Fixing of 20mm outer dia (1.40 to 1.55)mm thicknes medium grade with IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) concealed in wall with all required MS junction boxes and all accessories including masonary work for run of mains including all labour charges etc., complete. Makes : Precision/Universal& Marudhar/VIP/ GoldMedal / Million plast / GM / Sudhakar /Polycab/Anchor/ Polyline/ Orbit/AKG/Beljin/Vasavi/DEC
200
122
24420
... More
Supply and Fixing of 25mm outer dia (1.60 to 1.80)mm thicknes medium grade with IS:9537 part 3 FRLS rigid Surface P.V.C. pipe (ISI marked) on wall with all required PVC Junction Boxes confirms to IS : 3419 and all accessories fixing on chromium plated metallic base saddles for light, bell, fan, and separate plug point with18 SWG sheet steel switch boxes duly finished with two coats of zinchromate red oxide and enamel paint for switch box with earthing terminal including all labour charges etc., complete. including all labour charges etc., complete. Makes : Precision/Universal& Marudhar/VIP/ GoldMedal / Million plast / GM / Sudhakar /Polycab/Anchor/ Polyline/ Orbit/AKG/Beljin/Vasavi/DEC
600
120
72477.28
... More
Supply and Fixing of 25mm outer dia (1.60 to 1.80)mm thicknes medium grade with IS:9537 part 3 FRLS rigid Surface P.V.C. pipe (ISI marked) on wall with all required PVC Junction Boxes confirms to IS : 3419 and all accessories fixing on chromium plated metallic base saddles for run of mains including all labour charges etc., complete. including all labour charges etc., complete. Makes : Precision/Universal& Marudhar/VIP/ GoldMedal / Million plast / GM / Sudhakar /Polycab/Anchor/ Polyline/ Orbit/AKG/Beljin/Vasavi/DEC
600
116
69960
... More
Wiring with 2 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI marked) in existing pipe with 6A Modular switch (ISI marked) with cover plate, Ceiling rose/BH/ SBH, including all labour charges etc., complete for Light, Bell, Fan and Exhaust Fan points etc., complete. (for Non Residential Building).
Makes of wires:- Finolex / RR kabel / Havells KEI/Polycab/Gloster/Goldmedal/GM/ Finecab/ Fortune Arrt/Anchor/Million . Makes of switches:- Legrand (Myrius/Lyncus) / Schneider (Clipsal X/ Livia AB)/ Crabtree (Murano/Athena)/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA)/Million (M-VEE)/Anchor Roma (PLUS)
430
922
396675
... More
Wiring with 2 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI marked) in existing pipe with 2 Way 6A Modular switch (ISI marked) with cover plate, Ceiling rose/BH/ SBH, including all labour charges etc., complete for 2-way light and fan points/stair case light points etc., complete. (for Non Residential Building) Makes of wires:- Finolex / RR kabel / Havells KEI/Polycab/Gloster/Goldmedal/GM/ Finecab/ Fortune Arrt/Anchor/Million . Makes of switches:- Legrand (Myrius/Lyncus) / Schneider (Clipsal X/ Livia AB)/ Crabtree (Murano/Athena)/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA)/Million (M-VEE)/Anchor Roma (PLUS)
6
1383
8302.5
... More
Supply and Fixing of one module PVC blanking plate (safety dummy plate for empty module) for closing the dummy blank modules in the modular switch board for ensuring safety etc., complete. Makes:-Legrand (Myrius/Lyncus) / Schneider (Clipsal X/ Livia AB)/ Crabtree (Murano/Athena)/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA)/Million (M-VEE)/Anchor Roma (PLUS)
30
23
717
... More
Supply and Fixing of 6 Amps modular type (ISI marked) switch, and 6 A 3/2 pin Modular type socket with cover plate on a common switch board including giving all connections and all labour charges etc., complete. Makes of switches/sockets:- Legrand (Myrius/Lyncus) / Schneider (Clipsal X/ Livia AB)/ Crabtree (Murano/Athena)/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA)/Million (M-VEE)/Anchor Roma (PLUS)
25
457
11440
... More
Wiring with 2 of 22/0.3mm ( 1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI marked) in existing pipe with 6A (ISI marked) modular type switches and 6A, 3/2 pin modular type socket with cover plate fixing on existing, separate modular switch box including all labour charges etc., complete.
Makes of wires:- Finolex / RR kabel / Havells KEI/Polycab/Gloster/Goldmedal/GM/ Finecab/ Fortune Arrt/Anchor/Million .
Makes of switches/sockets:- Legrand (Myrius/Lyncus) / Schneider (Clipsal X/ Livia AB)/ Crabtree (Murano/Athena)/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA)/Million (M-VEE)/Anchor Roma (PLUS)
20
770
15418
... More
Supply and fixing of 2 No of 6A (ISI marked) modular type switches with 2 No of 6A, 3/2 pin modular type sockets with cover plate on suitable hot dip galvanized 20/18 SWG MS modular metal switch box with earthing terminal including all labour charges, giving all connections etc., complete for LABs & Computer Use.
Makes:Legrand(Myrius/Lyncus)/Schneider(Clipsal X/ Livia AB)/ Crabtree (Murano/Athena)/Lauritz Knudsen-englaze (Formerly L&T)/ GM-(Four-Five)/
Goldmedal(GIFA)/Million (M-VEE)/Anchor (Roma PLUS)/Precision(Series7)/Honeywell(Blenzepro)
20
1348
26966
... More
Supply and fixing of 4 No of 6A (ISI marked) modular type switches with 4 No of 6A, 3/2 pin modular type sockets with cover plate on suitable hot dip galvanized 20/18 SWG MS modular metal switch box with earthing terminal including all labour charges, giving all connections etc., complete for LABs & Computer Use.Makes:Legrand(Myrius/Lyncus)/Schneider(Clipsal X/ Livia AB)/ Crabtree (Murano/Athena)/Lauritz Knudsen-englaze (Formerly L&T)/ GM-(Four-Five)/
Goldmedal(GIFA)/Million (M-VEE)/Anchor (Roma PLUS)/Precision(Series7)/Honeywell(Blenzepro)
25
2214
55360
... More
Supply and fixing of 16A/6A, 2 in one, modular type socket with 16A switch (ISI marked) modular type with cover plate on existing modular metal switch box including all labour charges, giving all connections etc., complete.
Makes:Legrand(Myrius/Lyncus)/Schneider(Clipsal X/ Livia AB)/ Crabtree (Murano/Athena)/Lauritz Knudsen-englaze (Formerly L&T)/ GM-(Four-Five)/
Goldmedal(GIFA)/Million (M-VEE)/Anchor (Roma PLUS)/Precision(Series7)/Honeywell(Blenzepro)
20
597
11948
... More
Supply and Fixing of of 20A, modular type power socket outlet (ISI marked) with front cover plate on existing modular metal switch box including all labour charges, giving all connections etc., complete with following configurations
1) 20A Socket - 1 No Makes:Legrand(Myrius/Lyncus)/Schneider(Clipsal X/ Livia AB)/ Crabtree (Murano/Athena)/Lauritz Knudsen-englaze (Formerly L&T)/ GM-(Four-Five)/
Goldmedal(GIFA)/Million (M-VEE)/Anchor (Roma PLUS)/Precision(Series7)/Honeywell(Blenzepro)
10
452
4526
... More
Supply and Fixing of of 20A, modular type switch (ISI marked) modular type with front cover plate on existing modular metal switch box including all labour charges, giving all connections etc., complete with following configurations
1) 20A Switch - 1 No. Makes:Legrand(Myrius/Lyncus)/Schneider(Clipsal X/ Livia AB)/ Crabtree (Murano/Athena)/Lauritz Knudsen-englaze (Formerly L&T)/ GM-(Four-Five)/
Goldmedal(GIFA)/Million (M-VEE)/Anchor (Roma PLUS)/Precision(Series7)/Honeywell(Blenzepro)
10
364
3641
... More
Supply and Fixing of of 16A/6A, 2 in one, modular type power socket outlet with 16A switch (ISI marked) modular type and 2 No of 6A modular type sockets with 6A modular type (ISI marked) switch control with front cover plate oon hot dip galvanized 20/18 SWG MS modular metal switch box with earthing terminal including all labour charges, giving all connections etc., complete with following configurations
1) 16A Socket - 2 No
2) 16A Switch - 2 No
3) 6A socket - 2 No. 4) 6A switch - 2 No Makes of Switches/Sockets:- Legrand (Myrius/Lyncus) / Schneider (Clipsal X/ Livia AB)/ Crabtree (Murano/Athena)/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA)/Million (M-VEE)/Anchor Roma (PLUS)
20
2493
49872
... More
Supply and Fixing of of 16A/6A, 2 in one, modular type power socket outlet with 16A switch (ISI marked) modular type and 1 No of 6A modular type sockets with 6A modular type (ISI marked) switch control with front cover plate on hot dip galvanized 20/18 SWG MS modular metal switch box with earthing terminal including all labour charges, giving all connections etc., complete with following configurations
1) 16A Socket - 1 No
2) 16A Switch - 1 No
3) 6A socket - 1 No. 4) 6A switch - 1 No Makes of Switches/Sockets:- Legrand (Myrius/Lyncus) / Schneider (Clipsal X/ Livia AB)/ Crabtree (Murano/Athena)/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA)/Million (M-VEE)/Anchor Roma (PLUS)
20
1710
34216
... More
Supply and run of 1 of 22 /0.3mm (1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete. Makes of wires:- Finolex / RR kabel / Havells KEI/Polycab/Gloster/Goldmedal/GM/ Finecab/ Fortune Arrt/Anchor/Million
450
39
17685
... More
Supply and run of 3 of 2.5 sq.mm (phase neutral and earth) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing MS conduit pipe for individual ligting circuits including labour charges etc., complete as required for switch boards.
Makes of wires:- Finolex / RR kabel / Havells KEI/Polycab/Gloster/Goldmedal/GM/ Finecab/ Fortune Arrt/Anchor/Million
600
160
96120
... More
Supply and 3 runs of 4.0 sq mm (phase neutral and earth) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing conduit pipe for run of mains including labour charges etc., complete as required including labour charges for 16A sockets.
Makes of wires:- Finolex / RR kabel / Havells KEI/Polycab/Gloster/Goldmedal/GM/ Finecab/ Fortune Arrt/Anchor/Million
1200
219
263520
... More
Supply & run of 3 of 6.0 Sqmm (84/0.3mm) (phase neutral and earth) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing MS conduit pipe for run of mains including labour charges etc. complete for AC points & SDB's etc as required.
Makes of wires:- Finolex / RR kabel/ Havells/KEI/Polycab/ Goldmedal/GM/Million
500
310
155400
... More
Supply and run of 5 of 6 Sq mm (phases, neutral and earth) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing MS conduit pipe for circuits including labour charges etc. complete as required for run of mains from Lighting panel board to TPN DB'S with pin type lugs and connections. [for LDBs] Makes of wires:- Finolex / RR kabel / Havells KEI/Polycab/Gloster/Goldmedal/GM/ Finecab/ Fortune Arrt/Anchor/Million
200
518
103720
... More
Supply & run of 5 of 10.0 Sqmm (phases, neutral and earth) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in the existing conduict pipe for run of mains from Power panel board to TPN DB"s with pin type lugs and connections etc., complete. [for PDBs] Makes of wires:- Finolex / RR kabel / Havells KEI/Polycab/Gloster/Goldmedal/GM/ Finecab/ Fortune Arrt/Anchor/Million
200
796
159220
... More
Supply and Fixing of single phase DB in sheet steel enclosure as per IS 8623; IS 13032; IEC 61439-3 with metalic plug and socket with 1 No. 20/32A,10KA 'c' curve SPMCB control including labour charges and giving connections etc., complete concealed in wall. Makes for DBs: : Legrand(Ekinox 3) / Schneider-A9/Hager -
Novello+/ Seimens/Crabtree Xpro classique-II/L&TNewrange/Indo Asian-Opti Pro/ HPL (Techno)
30
2661
79830
... More
Supply and fixing of TPN 4 way distribution board with IP-43 protection and as per IS 8623; IS 13032; IEC 61439-3, (8+12 Module) with provision to accommodate the ELCB incomer and suitable for single pole outgoing MCB's in sheet steel enclosure with 32A, 10 KA breaking capacity 'c' curve 4 pole MCB as incomer and 12 No of 6 to 32A single pole, 10 KA breaking capacity 'c' curve MCBs as outgoings including making connections etc., complete concealed in wall. (LIGHTING DB). Makes for DBs: Legrand (Ekinox 3) / Schneider-A9/Hager -
Novello+/Seimens/HavellsSTADx/L&TNewrange/Indo Asian-Opti Pro/ HPL (Techno).
2
12148
24296
... More
Supply and fixing of TPN 6 way distribution board with IP-43 protection and as per IS 8623; IS 13032; IEC 61439-3, (8+18 Module) with provision to accommodate the ELCB incomer and suitable for single pole outgoing MCB's in sheet steel enclosure with 63A, 10 KA breaking capacity 'c' curve 4 pole MCB as incomer and 18 No of 6 to 32A single pole, 10 KA breaking capacity 'c' curve MCBs as outgoings including making connections etc., complete concealed in wall. (LIGHTING DB). Makes for DBs: Legrand (Ekinox 3) / Schneider-A9/Hager -
Novello+/ Seimens/Havells STADx/L&TNewrange/Indo Asian-Opti Pro/ HPL (Techno).
2
16067
32134
... More
Supply and fixing of TPN 4 way distribution board with IP-43 protection and as per IS 8623; IS 13032; IEC 61439-3, (8+12 Module) with provision to accommodate the ELCB incomer and suitable for single pole outgoing MCB's in sheet steel enclosure with 63A, 10 KA breaking capacity 'c' curve 4 pole MCB as incomer and 12 No of 6 to 32A single pole, 10 KA breaking capacity 'c' curve MCBs as outgoings including making connections etc., complete concealed in wall. (POWER DB). Makes for DBs: Legrand (Ekinox 3) / Schneider-A9/Hager -Novello+/ Seimens/HavellsSTADx/L&TNewrange/Indo Asian-Opti Pro/ HPL (Techno).
5
12931
64655
... More
Supply and fixing of VTPN DB, 4 way vertical type MCCB distribution board with IP-43 protection and as per IS 8623; IS 13032; IEC 61439-3, suitable to accommodate MCCB as incomer and single/three pole MCBs as outgoings with 125A, 4 Pole MCCB adjustable, confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 25 KA with thermal magnetic release as incomer with 3No of 40/63A, 10 KA TP MCBs 'c' curve and 3 No, 6-32A, 10 kA SP MCBs 'c' curve as outgoing including making connections and labour charges etc., complete concealed in wall. Makes for DBs: Legrand(Ekinox 3) / Schneider-A9/Hager -
Novello+/ Seimens/Havells STADx/L&TNewrange/Indo Asian-Opti Pro/ HPL (Techno).
1
35701
35701
... More
Supply and fixing of VTPN DB, 8 way vertical type MCCB distribution board with IP-43 protection and as per IS 8623; IS 13032; IEC 61439-3, suitable to accommodate MCCB as incomer and single/three pole MCBs as outgoings with 125A, 4 Pole MCCB adjustable, confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 25 KA with thermal magnetic release as incomer with 6 No of 40/63A, 10 KA TP MCBs 'c' curve and 6 No, 6-32A, 10 kA SP MCBs 'c' curve as outgoing including making connections and labour charges etc., complete concealed in wall. Makes for DBs: Legrand(Ekinox 3) / Schneider-A9/Hager -Novello+/ Seimens/Havells STADx/L&TNewrange/Indo Asian-Opti Pro/ HPL (Techno).
1
45810
45810
... More
Supply and fixing of Cable adopter/Cable end box with cover suitable for 4-way TPN, IP-43 protection DBs including, massanory work etc., complete for concealed mounting. Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/L&T-Newrange
4
1285
5140
... More
Supply and fixing of Cable adopter/Cable end box with cover suitable for 6-way TPN, IP-43 protection DBs including, massanory work etc., complete for concealed mounting. Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/L&T-Newrange
5
1715
8575
... More
Supply and fixing of Cable adopter/Cable end box with cover suitable for 4-way/8-way VTPN MCCB DBs with IP-43 protection including, massanory work etc., complete for concealed mounting. Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/L&T-Newrange
2
3975
7950
... More
Supply and Fixing of 32-40A, 25/36 KA Four Pole MCCB with suitable sheet steel enclosure on wall for Power Supply in Lift Machine Room including all Labours charges etc complete with connections. [for Lift Machine Room power supply] Makes for DBs: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/L&T-Newrange and Makes for MCBs: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/L&T-AU
2
14616
29232
... More
Supply and Fixing of 6-32A, 10 KA breaking capacity 'c' curve double pole MCB in sheet steel DP enclosure with IP 20 Protection etc., complete as per IS 8623; IS 13032; IEC 61439-3 including making connections etc., complete on wall. [for UPS Input/Output control etc.,] Makes for DBs:Legrand-DX3 / Schneider-A9/Hager-h3/ Siemens-5SX4/ Havells STADx /L&T-AU/Indo Asian-Opti pro/ HPL (Techno)
2
1666
3332
... More
Supply and Installation of 63A FP, MCCB, 16KA on wall with suitable sheet steel enclosure with cable end boxes including all labour charges etc complete with connections. Make: L&T- D shine / Schneider-CVS/Legrand –(DP X3/DRX)/ Siemens- 3VL / Hager-h3/C&S -Winbreak/HPL-Techno
2
12901
25802
... More
Supply and Installation of 125A FP, MCCB, 25KA on wall with suitable sheet steel enclosure with cable end boxes including all labour charges etc complete with connections. Make: L&T- D shine / Schneider-CVS/Legrand –(DP X3/DRX)/ Siemens- 3VL / Hager-h3/C&S -Winbreak/HPL-Techno
2
16256
32512
... More
Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C.Chamber of 400m x 400m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)
4
8705
34820
... More
Providing independent earthing for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 40mm dia G.I Pipe of 2.5 mtr length connected with reducer providing G.I funnel with wiremesh as per National Electric Code including C.C.Chamber of size 400m x 400m x 400mm covered with R.C.C. Slab filling with salt and charcoal giving earth connection from electrode with Copper strip of 25mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to Copper strip with all accessories and labour charges complete as per IS specification 732/1982 (Part II).
3
25450
76350
... More
Supply and Run of 40mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete
40
241
9660
... More
Supply and Run of No. 8 SWG copper wire including cost of all accessories and labour charges etc., complete.
60
165
9936
... More
Supply and Run of 25mm x 3mm copper strip including cost of all accessories and labour charges etc., complete.
30
821
24654
... More
Supply and fixing of 18-20W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of 120 lumens/watt , PF0.9, Surge protection: 2KV, THD15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI70, etc., complete with earth connection and not less than two years warranty. a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready// Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/ Everlight.
60
728
43680
... More
Supply and fixing of 18 W heavy duty LED Down lighter, suitable for Recessed mounting made of pressure diecast aluminum body with powder coating, acrylic diffuser with driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltage of 150 to 265 Volts AC, P.F 0.9, Surge protection: 2KV, THD10% with high power LEDs, having System Efficacy of 120 lumens / watt, CCT: 3000K - 5700K, minimum CRI 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete with earth connection and not less than two years warranty
a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready/ FortuneArrt/ Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/Everlight
80
1535
122800
... More
Supply, transportation and fixing of 36W Recessed / Surface mounting 2' x 2' (600x600 mm) LED luminaire made of CRCA sheet housing with powder coated with acrylic diffuser, constant current driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , with operating voltage range of 150 to 265 Volts AC, P.F 0.9, Surge protection: 2KV, THD10%, with high power LEDs, having System Efficacy of 120 lumens / watt, CCT: 3000K - 5700K, minimum CRI70, .etc., complete with earth connection and not less than two years warranty
a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready / FortuneArrt// Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/Everlight.
140
3166
443240
... More
Supply and transportation of 120 W LED High Bay Luminaire with high power COB LED made of pressure diecast aluminum housing with powder coated, supply input voltage 120 - 270 V AC, P.F 0.90, high power LEDs, having system efficacy 120 lumens/watt and junction temperature 70°C, with ingress protection IP66, IK05, Driver surge protection 4KV, in-house additional surge protection ≥ 5KV with wide/narrow beam optics, THD10% at 110 Volts AC, driver efficiency 90%, , CCT: 3000K - 5700K, minimum CRI70, etc., complete with earth connection and not less than two years warranty. a) LUMINAIRE MAKE : Wipro / Philips/ GE-Venture / Crompton/ Bajaj /Greenlites / Havells/Capart(Premium) /Halonix/Polycab/Keselec/ HPL/ Jaquar/Eveready / Surya (ORION-II)/ FortuneArrt (UFO-S)/Rhino(GPHB02 Series)
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG .
4
10941
43764
... More
Supply and Fixing of batten holder/angle holder on existing block with 0.5W LED Lamp with input voltage 90 to 300V, Colour temparature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base and all labour charges etc., complete., in lieu of ceiling rose for bed light in hostel rooms or residential buildings.
Makes: Phillips /Crompton / Bajaj / Havells / GM/HPL/Syska /GoldMedal
12
133
1596
... More
Supply and Fixing of batten holder/angle holder on existing block with 5W LED Lamp with input voltage 90 to 300V, Colour temparature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base and all labour charges etc., complete. In lieu of ceiling rose.
Makes: Phillips /Crompton / Bajaj / Havells / GM/HPL/Syska /GoldMedal
10
206
2060
... More
Supply and Fixing of 10W LED Bulk head fitting with Pressure die cast alluminum with opal diffuser with water tight clear glass with hinged wire guard etc., complete with IP 65 Protection. Makes : Philips/Bajaj / Crompton / Surya / Havells/HPL.
5
1148
5740
... More
Supply and fixing of Ding dong bell on 6"x8" decolam block including giving connections, cost of all accessories and labour charges etc., complete.
Makes: GM / Gold Medal / Million / Vimal / Anchor
6
362
2173.2
... More
Supply and fixing of buzzer on 4"x4" decolam block including giving connections, cost of all accessories and labour charges etc., complete.
Makes: GM / Gold Medal / Million / Vimal / Anchor
4
222
889.6
... More
Supply and fixing of Remote bell including giving connections cost of all accessories and all labour charges etc., complete. Makes: GM / Gold Medal / Million / Vimal / Anchor
4
965
3862
... More
Supply of 48" (1200mm) Sweep star rated Ceiling Fan, with double ball bearings, air delivery more than 200 cubic meter/min, but without Regulator.
Makes : Crompton HS Plus / Havells ES PLUS/Orient Energy Star/Halonix(Zephyr)/Polycab(Synergy 50 ISI) / G.M. (Air Wave Premium)/Bajaj-Edge.
90
2665
239850
... More
Supply and fixing of Modular type 2- Module, Electronic fan regulator hum free step type socket size in the existing switch board. Makes :- Legrand (Myrius/Lyncus) / Schneider (Clipsal X/ Livia AB)/ Crabtree (Murano/Athena)/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA)/Million (M-VEE)/Anchor Roma (PLUS)
90
569
51237
... More
Labour charges for fixing of ceiling fan including transportation and giving connections with 23/0060 size, 3 core round flexible copper wire leads of make Finolex / RR kabel/ Havells/KEI/Polycab/ Goldmedal/GM/Million etc complete
90
230
20709
... More
Supply and erecting 19/20mm steel tube down rod of 0.6 mt length with bolts & nuts duly painted with matching colour of fan complete
40
176
7072
... More
Supply and erecting 19/20mm steel tube down rod of 0.75 mt length with bolts & nuts duly painted with matching colour of fan complete
50
197
9880
... More
Supply and Transportation and fixing of 16" (400mm) Wall mounted Fan. Makes: Crompton Wind Flo / Bajaj Elite / Havells Swing / Orient Wall 50/Halonix Krypton/G.M. (Bolt)/ Goldmedal(Nora-16)
15
3205
48081
... More
Supply and Transportation of 12" (300mm) Light duty exhaust fan with metalic blades and wire guard etc complete.
Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DSP / Orient hill air/Halonix /Polycab/G.M. (Xenix)/Goldmedal (Rapido-12)
10
2021
20212
... More
Supply and Transportation of 12" (300mm) ISI, 900 RPM Heavy duty exhaust fan with metallic blades with Mark. Makes: Crompton / Almounard / Havells Ventil AirDB
10
3836
38367
... More
Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete
20
1063
21260
... More
Supply and fixing of louver shutter suitable for 12" Exhaust fan including all labour charges etc complete with connections and colouring matching to the wall with enamel paint.
20
305
6100
... More
Supply, Transportation and fixing of storage / Pressure type Vertical / Horizontal 230/250V single phase 2000watts ISI mark 5 Star rated water heater with SS tank and ABS plastic body of 25 L capacity to withstand up to 6.5 bar of water pressure including all standard accessories and dead weight pressure reducing valve on out let side, including cost of 2 Nos nylon / PVC / Metallic hose pipe, testing and all labour charges etc., complete.
Makes : Prevailing models of Crompton/ Jaquar / Venus / Racold / AO Smith /Havells /Warmex 25 Ltrs. Water Heater
6
15679
94074
... More
Supply and fixing of water cooler fully stainless steel of 60 litres cooling capacity and 120 litres storage capacity to be operated on single phase supply with ISI mark. Makes: Blue star / Voltas / Usha.
2
45800
91600
... More
Supply and transportation of following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part-I)/1554-I
Makes: Torent / Universal / Unicab / Havells / KEI / Gloster/Finecab / Polycab /RR Kabel/ Fortune Arrt
3.5 core, 25 Sq.mm
100
280
28060
... More
Supply and transportation of following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part-I)/1554-I
Makes: Torent / Universal / Unicab / Havells / KEI / Gloster/Finecab / Polycab /RR Kabel/ Fortune Arrt
3.5 core, 50 Sq.mm
100
460
46010
... More
Labour charges for run of armoured U.G cables upto 50 Sq.mm in existing cable trench/cable duct/ cable tray/hume pipe/G.I. pipe with necessary fixing arrangments such as cable ties etc., as directed by department at site.
200
48
9720
... More
Supply,transporatation & installation of following sizes of Hot Dipped Galvanized Iron perforated cable trays without cover, including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling/Wall with suspenders etc., complete
150mm X 50mm X 1.6mm size
100
492
49200
... More
Supply,transporatation & installation of following sizes of Hot Dipped Galvanized Iron perforated cable trays without cover, including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling/Wall with suspenders etc., complete
300mm X 50mm X 1.6mm size
100
907
90780
... More
Supply,transporatation & installation of following sizes of Hot Dipped Galvanized Iron perforated cable trays with cover, including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling/Wall with suspenders etc., complete
150mm X 50mm X 1.6mm size
20
639
12790
... More
Supply,transporatation & installation of following sizes of Hot Dipped Galvanized Iron perforated cable trays with cover, including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling/Wall with suspenders etc., complete
300mm X 50mm X 1.6mm size
20
1180
23602
... More
Supply, installation, testing and commissioning of the following capacity on line UPS system confirms to IS 16242(Part-I):2014 and IEC 60240-1:2008 with IGBT technology pure sine wave out put, double conversion with auto and manual static by pass switch single phase input / single phase output with, all accessories and labour charges etc., complete excluding batteries. Makes: Numeric/APC/Fuji Electric/ Sakshham /Emerson
10.0 KVA , 192/240V DC UPS with Isolation transformer
2
160130
320260.2
... More
Supply, installation, testing and commissioning of the following capacity on line UPS system as per IEC 62040-I(Safety) ,IEC 62040-3(Performance) for critical IT solutions, fully digital IGBT Converter and Inverter ,with Internal /External isolation transformer from DC to AC, PWM, pure sine wave out put, double conversion, output pf 0.9, with parallelling facility, standard communicaton features/options auto and manual static by pass switch, three phase input / three phase output, accoustic level shall be less than 58dB at 1 mtr distance, with all accessories and labour charges etc., complete excluding batteries. Makes: Numeric/APC/Fuji Electric.
20.0 KVA , 312/360V DC UPS
1
372381
372381.7
... More
Supply and fixing of 12V 42 AH SMF battery with 3 years warranty including wire leads, connections etc complete Makes: Quanta / Racket / Exide
40
7123
284948
... More
Supply and fixing of 12V, 65 AH SMF Battery with 3 years Warranty, including wire leads, connections etc complete. Makes: Quanta / Racket / Exide
30
8098
242955
... More
Supply and providing of powder coated, corrosion free MS battery rack of approved make suitable for erecting for the following number and sizes of batteries
upto 11 to 20 batteries (42/65 AH)
2
6248
12497.6
... More
Supply and providing of powder coated, corrosion free MS battery rack of approved make suitable for erecting for the following number and sizes of batteries
upto 5 to 10 batteries (42 AH)
4
3749
14997.2
... More
Supply, installation, testing and commissioning of single headed Internal / External hydrant valve with instantaneous Gun metal couplings of 63mm dia with Cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gun Metal cap and chain as required.
Makes: Newage/ Winco/ Padmini / Safex/Minimax/ Newtech/Honeywell/Kartar
6
10797
64782
... More
Supplying and fixing of hose cabinet of size 750mm X 600mm x 250mm or suitable size made of No 16 gauge SWG CRCA sheet with 6mm thick glazed glass door including necessary locking arrangement suitable to accommodate 2 Nos 15 mtr long Hose pipe, 1 No branch pipe, mounted on wall OR raised brick platform and duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant as required..
Makes:Minimax/Safex/Newage/Winco/Padmini/NewTech/Kartar
6
4289
25734
... More
Supply, installation, testing and commissioning 63mm dia, 15 mtr long RRL hose / CP Hose pipe with 63mm dia Male and Female Gun metal duly binded with GI wire, rivets etc. conforming to IS 636 (Type -A) as required.
Make: Newage/ Winco/ Padmini / Safex / Minimax/NewTech/Honeywell/Kartar
6
8328
49968
... More
Supply and fixing 63mm dia Gun metal branch pipe with 20mm (Nominal internal diameter) size Gun metal conforming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required.
Make: Newage/ Winco/ Padmini / Safex / Minimax/NewTech/Kartar.
6
3253
19523.58
... More
Supplying and fixing First -Aid Hose Reel with MS construction spray painted in Post office Red, Conforming to Is 884 with upto date amendments, complete with the following as required.
a) a) 36.6 Mtr Long 20mm (Nominal internal) dia water hose Thermoplastic / Textile reinforced / Rubber braided / Polypropylene Type - 2 as per IS:12585
Make:Reliance/Newage/Safex/NewTech/Winco/Minimax/Kartar
b) 20mm (Nominal internal) dia gun metal ball/gate valve and nozzle.
Make: NEU-G/SANT / Safex/Kartar. c) Drum and brackets for fixing the equipment on wall.
d) Connections from riser with 25mm dia stop valve (gun metal) & MS pipe..
6
9909
59457
... More
Supply, installation, testing and commissioning of 25mm dia Ball valve
Makes : Zoloto / Leader / SANT/NEU- G/Kartar
6
857
5146.74
... More
Supply, fabricating , installing structural steel supports for fixing all sizes of MS pipes from ceiling / wall with MS Channels, Angles, Flats, Rods, as required at site with anchor fasteners, Clamps, threaded rods, nuts, bolts,washers etc complete with painting.
800
93
74528
... More
Providing , laying, testing & Commissioning of following classes " B" MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.
Makes: - Jindal / Hissar / Tata pipes/Prakash Surya 150mm dia
150
3109
466350
... More
Providing , laying, testing & Commissioning of following classes " B" MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.
Makes: - Jindal / Hissar / Tata pipes/Prakash Surya 100mm dia
150
2072
310800
... More
Providing , laying, testing & Commissioning of following classes " B" MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.
Makes: - Jindal / Hissar / Tata pipes/Prakash Surya 80mm dia
300
1469
440700
... More
Providing , laying, testing & Commissioning of following classes " B" MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.
Makes: - Jindal / Hissar / Tata pipes/Prakash Surya 65 mm dia
250
1088
272000
... More
Providing , laying, testing & Commissioning of following classes " B" MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.
Makes: - Jindal / Hissar / Tata pipes/Prakash Surya 50mm dia
500
846
423000
... More
Providing , laying, testing & Commissioning of following classes " B" MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.
Makes: - Jindal / Hissar / Tata pipes/Prakash Surya 40mm dia
250
640
160000
... More
Providing , laying, testing & Commissioning of following classes " B" MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.
Makes: - Jindal / Hissar / Tata pipes/Prakash Surya 32 mm dia
250
518
129500
... More
Providing , laying, testing & Commissioning of following classes " B" MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.
Makes: - Jindal / Hissar / Tata pipes/Prakash Surya 25mm dia
1000
432
432000
... More
Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required.
Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto / SANT/NEU-G/Honeywell//Kartar
200mm dia
50
7248
362400
... More
Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required.
Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto / SANT/NEU-G/Honeywell//Kartar
150mm dia
100
6064
606400
... More
Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required.
Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto / SANT/NEU-G/Honeywell//Kartar
100mm dia
100
4659
465900
... More
Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required.
Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto / SANT/NEU-G/Honeywell//Kartar
80mm dia
100
4289
428900
... More
Supply and fixing 2 way fire brigade connection of cast iron body with 2 Nos Gun metal Male instantaneous inlet couplings complete with cap and chain as required for 100mm dia MS pipe connection, conforming to IS 904 as required. Makes: Newage/ Winco/ Padmini / Safex /Minimax/NewTech/Honeywell/Kartar
1
8874
8874.46
... More
Supply, installation, testing and commissioning of 25 / 20mm dia Air Release Valve Makes: Zoloto / Leader / SANT/Kartar
5
1627
8135
... More
PUMPS & EQUIPMENT :
Supplying, installation , testing and commissioning of electric driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required
a) a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 Kg / sq.cm. at highest and farthest outlet at specified flow of 2280 lpm at 70 Mtr. head conforming to IS 1520 b) Suitable HP SQ cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.
c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required.
d) Suitable cement concrete foundation duly plastered with anti-vibration pads.
Makes of Pumps: Kirloskar / Mather&Platt.
Makes of Motors: Siemens/ ABB/ Kirloskar
1
513640
513640
... More
Supplying, installation, Testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required
a)Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 Kg / sq.cm. at highest and farthest outlet at specified flow of 2280 lpm at 70 Mtr head conforming to IS 1520
b) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant BS & IS standard complete with auto starting mechanism, 12 Volts / 24 Volts electric starting equipment, Diesel Tank, exhaust pipe extended upto 1 m. outside pump house duly insulated with 50mm thick glass wool with 1.0mm thick aluminum sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc as required.
c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required
d) Suitable cement concrete foundation duly plastered with anti-vibration pads.
Makes of Engines : Kirloskar / Cummins.
Makes of Pumps : Kirloskar / Mather & Platt
1
856066
856066
... More
Jockey Fire Pump:
Supplying, installation, testing and commissioning of electric driven pressurization / Jockey pump suitable for automatic operation and consisting of following: complete in all respect as required a)Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal and flow of 180 lpm at 70 Mtr head conforming to IS 1520
b) Suitable HP SQ cage induction motor TEFC type suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325
c)M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required.
d) Suitable cement concrete foundation duly plastered with anti-vibration pads
Makes of Pumps : Kirloskar / Mather & Platt.
Makes of Motors : Siemens/ ABB/ Kirloskar
1
102728
102728
... More
ELECTRCAL PANEL: Fabrication, Supplying, .installation, Testing & Commissioning of electrical control panel of cubical construction, floor mounted MV panel type, fabricated out of 2mm. thick CRCA sheet compartmented with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, Inter-connection, having switchgears and accessories mounting and internal wiring, earth terminals. numbering etc. complete in all respect suitable for operation on 415 V, 3 phase, 50 HZ. AC supply with endosura protection class IP 42 as required.
INCOMER:
250A TPN MCCB- 1NO
Voltmeter (0-500 Volts) with selector switch.
Ammeter (0- 250 Amps.) with selector switch &. CT
Set of 3 Phase Indicating lamp
Set of AI. Bus Bar 400 Amps
Main Fire Pumps:
160A TP MCCB with 75 HP fully automatic star/delta starter with over load protection, single phase preventer and indication lamps etc., complete with all accessories and Internal wiring required for automatic operation, selector switch for auto/ manual OFF operation. - 1 Nos.
JOCKEY PUMP
63Amps. TP& N MCCB with 12.5/15 HP DOL starter with overload protection, singles phase preventer complete with all accessories and Internal wiring required for automatic operation, selector switch for, auto/ manual OFF operation. - 1 Nos.
Diesel Engine Control.
Control for Diesel Engine comprising:*
Auto/Manual selector switch & 3 attempt starting levies, timers and relays .as required, push muttons, start/stop in manual mode. timers and relays .as required, push muttons, start/stop in manual mode.
Indication lamp for High/low Lub.oil pressure, High Water Temp.end Engine ON Indication.
Battery Charger suitable for 12 V/ 24 V DC with boost and tickle selector switch, 0-30 V DC volt meter, 0-20A DC Ammeter.
Alt standard relays and accessories for automatic operation of diesel engine
1
303105
303105
... More
Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required.
Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto / SANT/NEU-G/Honeywell//Kartar
200mm dia
1
7248
7248
... More
Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required.
Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto / SANT/NEU-G/Honeywell//Kartar
150mm dia
1
6064
6064
... More
Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required.
Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto / SANT/NEU-G/Honeywell//Kartar
100mm dia
1
4659
4659
... More
Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required.
Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto / SANT/NEU-G/Honeywell//Kartar
80mm dia
1
4289
4289
... More
Providing, installation, testing and commissioning of dual Plate non -return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required.
Makes: BDK / NEU-G / Leader/ Zolotto / SANT/Honeywell//Kartar
200mm dia
1
13607
13607.66
... More
Providing, installation, testing and commissioning of dual Plate non -return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required.
Makes: BDK / NEU-G / Leader/ Zolotto / SANT/Honeywell//Kartar
150mm dia
1
9762
9762
... More
Providing, installation, testing and commissioning of dual Plate non -return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required.
Makes: BDK / NEU-G / Leader/ Zolotto / SANT/Honeywell//Kartar
100mm dia
1
5176
5176
... More
Providing, installation, testing and commissioning of dual Plate non -return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required.
Makes: BDK / NEU-G / Leader/ Zolotto / SANT/Honeywell//Kartar
80mm dia
1
5029
5029
... More
a) Supply of 185 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured aluminium cable as per specification confirming to IS:7098 (Part - I) of Makes:Torent /Universal/Unicab/Havells/KEI/Gloster/Finecab / Polycab /RR Kabel/ Fortune Arrt
100
1416
141680
... More
Supply & Installation, Testing and commissioning of trolley mounted, electrically operated triplex plunger pumps with 5-H.P, 1-Phase 1450 rpm, 1-phase motor with high pressure triplex pump of 5-0 kg/cmv with nylon hydraulic hose pipe of 3/4" dia, 5mt height for suction and 3/8" dia 30mt length for delivery with all required nozzles has values, high pressure gun, fittings etc with come of 3-core,2.5 Sq mm flexible copper cable with 3-pin 16A top and all required accessories and labour charges for erection, testing including transportation etc. complete, Make of motor: Crompton, Kirloskar, Texmo, KSB,CRI, Suguna with ISI mark. Pump:Greentech,Kisan,Ultrajet,Pressurejet,Ambicatools,Seaara or any ISI
3
53087
159261
... More
Supply, install, test and commissioning of addressable peer to peer 2 loop Networkable analogue addressable type fire alarm control panel with minimum 1500 Character / 240X64 Pixel / 7inch Touchscreen graphic LCD display. The panel should be equipped with sufficient numbers of loop with 20% spare capacity, with each networkable intelligent fire alarm Control Panel having SLC with capacity of min 250 detectors/ devices in any combination (Min 120 Detector) with key pad, dual flash-based microprocessor technology, inbuilt USB Port for upload and down load the configuration tools, RS232 serial port for direct PC or modem connection, inbuilt NAC's, min 20 programmable Zonal LEDs and operates on 240V AC + 10% with 50 Hz with built in charger. The panel shall have fire, fault relays, option of BMS integration MODBUS/ BACKNET, graphical software for provision of TCP/ IP modules, Remote Access, Class 'X' wiring with provision of both class 'A' and class 'B' wiring in the SLC circuit, user friendly with communication facility to monitor & control the FACPs from a single window. The panel shall be suitable for minimum of 5000 event record facility, event fetch from FACP facility and the single panel shall be suitable for min 2000 fire zones and 200 Panels/ Nodes in one network with all other accessories required to successfully run the system. (The System cost shall be included of all necessary cards, modules, Panel enclosure, CPU and associated accessories to complete the system design)( SSR - 23-24, Item No: 9.2.2 b )
Makes: Siemens / Morley / Honeywell/ Ravel/Seaara/Apollo
1
287446
287446
... More
Analogue Addressable Multi-sensor (Smoke & Heat) detector with LED with standard base having capacity of min 126 address combination. Operating temperature -40°C to 70°C & Humidity 0-95%. The detector should have polling 360-degree viewable LED with 5 class approved response modes all approved with the relevant standards, drift compensation and transient rejection. The detector should trigger heat alarm as per the A1R class requirement. The detector shall have facility to mount in different comprehensive environment like Hostile environment, Parking Garage, Precious storage, Ware house and normal working environments. The detector should have a self-locking mechanism and requires a special tool to remove this detector. The detector should have a hard address inside the base.The detector should be made of fire-retardant material & should be melt above 100-degree C. The detectors must be open for the cleaning of dust whenever required. The detector must have 4 nonvolatile memories to write the installation date & site codes Makes: Notifier / Edwards/Bosch
100
5131
513100
... More
Supply, install, test and commissioning of Analogue addressable Control (Input/Output) module with inbuilt relay and isolator with LED indicator, approved to operate in –10°C to +55°C tempSupply, install, test and commissioning of Analogue addressable Control (Input/Output) module with inbuilt relay and isolator with LED indicator, approved to operate in –10°C to +55°C temperature, complies with the essential requirement of the EMC Directive to be supplied with Junction Box and other mounting accessories for proper installation. In case of Manufacturer with single Input or Output module need to supply One quantity of each for line item. Makes: Notifier / Edwards/Bosch
20
5433
108660
... More
Supply, Installation, Testing & Commissioning of Dust and Vermin proof (Resettable) addressable analogue Manual call boxes along with Isolators inbuilt having front reset mechanism with 170° viewable LED and can be viewed from the distance of 7 M. also have inbuilt isolator having operating temperature from -40°C-70°C to initiate audio visual alarm in case of Human detection of fire. The manual call point must be indoor type with IP 44 rating. The call point must be resettable type without break glass Makes: Notifier / Edwards/Bosch
18
6468
116425.8
... More
Supply and installation of dual tone electronic hooter of 85dB including the cost of mounting accessories complete as per specifications and as required
Makes: System Censor / Ravel/Vertex
4
1078
4312
... More
Supply and installation of dust and vermin proof manual call point to initiate audio-visual alarm including the cost of mounting accessories complete as per specifications and as required. Make:Torrent/Universal/Unicab/Havells/KEI/Polycab/Gloster/Orbit/ Paragon/RR Kabel/RPG/Rhino/Pawancab/AKG/LS cable
4
862
3448
... More
Supply and Transportation of XLPE/PVC insulated & PVC sheathed armoured cables of 1.1 KV grade with copper conductor as per IS 7098 Part-I -1988 etc complete Make: Torrent / Universal / Unicab / Havells / KEI /Polycab/Gloster/Orbit/Paragon/RRKabel/RPG/Rhino/Pawancab/AKG/LS cable 2 C x 1.5 sq.mm
2700
159
430650
... More
Supply and installation of dust and vermin proof manual call point to initiate audio-visual alarm including the cost of mounting accessories complete as per specifications and as required. Make: Torrent / Universal / Unicab / Havells / KEI /Polycab/Gloster/Orbit/Paragon/RRKabel/RPG/Rhino/Pawancab/AKG/LS cable
4
862
3448
... More
Supply and fixing of Co2 type Fire Extinguishers 4.5 Kg capacity confirming to IS 2878 made from ISI marked steam less cylinder confirming to IS:7285 & CE certified and fitted with ISI marked controlled valve confirming to IS:3224, high pressure 1 Mtr discharge hose & horn complete with initial gas charged with carrying handle with wheels and wall mounting bracket. Squeeze lever discharge, used un-used indicator, epoxy coated paint (Red) with 93% gloss with 2 years warranty including transportation, all taxes and all labour charges etc complete Makes : Cease Fire / Minimax.
5
16280
81400
... More
Supply and fixing of ISI mark (IS:15683) Mono ammonium phosphate powder 90 (MAP) 6 Kg Fire extinguisher, stored pressure type, pressure gauge, gross wt. 9.4 kg, empty wt.3.4 kg, Discharge time minimum 13 sec, controllable discharge mechanism, range min. 4 mts applicable on classes A,B, C & electrically started fire, A rating -4 A, B rating -34 B, can construction: Deep drawn and Co2 MIG welding, Valve construction: Forging & Machining, internal coating of can: Epoxy powder coating, External coating of Can: Epoxy polyester powder coating, sheet metal thickness:1.60mm, Helium leak detection tested with 5 years warranty Including transportation, all taxes and all labour charges etc complete. Makes : Cease Fire / Minimax.
5
10307
51535
... More
Supply, Transportation, Installation, Testing and Commissioning of the following INVERTER Model Cool type split AC unit with high wall mounted Single Split indoor unit and outdoor condensing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with coolingandcondensing units with 3 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord with cordless remote control etc., dual barrier coating in order to protect coil form oxidation. 1.5 TR, 5 star capable of delivering 18000 BTU/hr and above with operating on refrigerant R-32/ R410A, COP not less than 4.5 Makes: Mitsubishi / O General /Toshiba (prevailing models in the market)
4
76935
307740
... More
Supply, Transportation, Installation, Testing and Commissioning of the following INVERTER Model Cool type split AC unit with high wall mounted Single Split indoor unit and outdoor condensing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with coolingandcondensing units with 3 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord with cordless remote control etc., dual barrier coating in order to protect coil form oxidation. 2.0/2.2 TR, 5 star capable of delivering 24000 BTU/hr and above with operating on refrigerant R410A / R-32 Makes: Mitsubishi / O General /Toshiba (prevailing models in the market)
5
99770
498850
... More
Providing 2 runs of Copper tubes for suction and liquid between indoor and outdoor unit for split/Casseete Air- Conditioner including foaming etc., complete. Make: Copper:Totaline /Nippon /Mandev/Nitrile Insulation: Kflex/ Totaline /Armaflex 1/2" x 1/4"
20
1280
25608
... More
Providing 2 runs of Copper tubes for suction and liquid between indoor and outdoor unit for split/Casseete Air- Conditioner including foaming etc., complete. Make: Copper:Totaline /Nippon /Mandev/Nitrile Insulation: Kflex/ Totaline /Armaflex 5/8" x 1/4"
20
1407
28154
... More
Supply and erecting fully automatic line voltage stabilizer for operation on input voltage 200V to 250V rated for 4 KVA maximum load and time delay model with 16A, 3-way connector/ socket for output and with 3 core flexible chord and 3 pin 6/16A plug top for input suitable for Air-conditioner for continuous operation including cost and conveyance of all mateials and all labour charges etc., complete. Stabilizer Makes : : V-Guard / Real Guard / Uni Stab / ITL
4
3495
13983.6
... More
Supply and erecting fully automatic line voltage stabilizer for operation on input voltage 200V to 250V rated for 5 KVA maximum load and time delay model with 16A, 3-way connector/ socket for output and with 3 core flexible chord and 3 pin 6/16A plug top for input suitable for Air-conditioner for continuous operation including cost and conveyance of all mateials and all labour charges etc., complete. Stabilizer Makes : : V-Guard / Real Guard / Uni Stab / ITL
5
4237
21189
... More
Supply, installation, and testing of UPVC Drain Piping with 6mm Nitrile Rubber class "O" Insulation covered with interwoven glass cloth protection. Necessary pipe fittings (including enlarger, bends, T Joints etc) has to be considered to connect the UPVC drain pipe to cast iron floor trap. 25 mm dia
100
214
21400
... More
Supply, Transportation and laying of 3 core, 2.5 Sq.mm XLPE/PVC insulated & PVC sheathed Unarmoured control cables of 1.1 KV grade with copper conductor as per IS 7098 Part-I -1988 in the existing PVC conduit including all labour charges, giving connections etc., complete. Make: Torrent / Universal / Unicab / Havells / KEI/Polycab/Gloster /orbit/ Paragon/ RR Kabel/ RPG/Pawancab/AKG/LScable
100
202
20230
... More
Supply, fabricating , installing structural steel supports for fixing all sizes of MS pipes from ceiling / wall with MS Channels, Angles, Flats, Rods, as required at site with anchor fasteners, Clamps, threaded rods, nuts, bolts,washers etc complete with painting.
100
93
9316
... More
Supply, Transportation and laying of 6 core, 2.5 Sq.mm XLPE/PVC insulated & PVC sheathed Unarmoured control cables of 1.1 KV grade with copper conductor as per IS 7098 Part-I -1988 including all labour charges, giving connections etc., complete for Generators from their AMF/Synchronour Panels and for auxiliary supplies to PCC Panels/HT VCB Panels Panels. Makes: Torrent / Universal / Unicab / Havells / KEI /Polycab/Gloster /RR Kabel/ RPG
90
310
27918
... More
Supply and laying of 2 pair telephone wire 0.5mm copper in the existing metallic/non metallic conduit pipe with connections etc.,complete for telephone wire. Makes: Finolex / Delton / Surabi / Polycab
2500
21
54250
... More
Supply and laying of 5 pair telephone wire 0.5mm copper in the existing metallic/non metallic conduit pipe with connections etc.,completeTelephone wire Makes: Finolex / Delton / Surabi / Polycab
500
48
24300
... More
Supply and fixing of 2 Line telephone jack type socket modular type with front and back plate in MS box with screws and connections etc.
Makes: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/ Livia AB)/ Crabtree(Murano/Athena) /L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA)/Million (M-VEE)/Anchor Roma (PLUS)
40
285
11412
... More
Supply, Installation, testing and Commissioning of IP Based digtal Telephone (EPABX) system -----complied with following specifications: IP @ Core, PCM/TDM, Non blocking, Must Support PRI, E1, Analog Junctions Must Support PC Console, Must support Mobile SIP (Android and Ios) Must support Voice Mail Must support Card based GSM Inbuilt 8 Channel Auto Attendant Inbuilt Call Details Software with search engine software 4 Analog Trunks 1 ISDN PRI Module 6 Digital Extensions 64 Analog Extensions 1 Digital Key Phone with minimum 16 Keys (Must work
only on 2 wires) Expandable to 64 Analog Extensions or more
Makes: NEC/ Alcatel /Avaya/Siemens
1
149846
149846
... More
Supply and Installation of Digital Key Telephone with 2 line display, 16 programmable keys, fully handsfree talk back.
10
20209
202090
... More
Supply, Installation, Testing and commissioning of Non caller ID push button Telephone instruments etc., complete with connectors. Make : Beetel / NEC/ Alcatel /Avaya/Seimens.
10
562
5620
... More
Supply and fixing of 2 Line telephone jack type socket modular type with front and back plate in MS box with screws and connections etc.Makes:Legrand(Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/ L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA)/ Million (M-VEE).
10
285
2853
... More
Supply and Installation of 100 Pair MDF loaded with 2/10 Modular, Telephone distribution box with back mount frame, krone connector, powder coated metal body with lock and key arrangement. Makes: Krone or equivalent make.
1
4577
4577
... More
Supply and Installation of 20 Pair Telephone distribution box with back mount frame, krone connector, powder coated metal body with lock and key arrangement. Makes: Krone or equivalent make.
3
1543
4629
... More
Supply of 20 Pair telephone Copper wire. Makes: Finolex / Delton / Surabi / Polycab
30
127
3819
... More
Supply, laying, testing and commissioning of 4-pair, Cat-6 Solid (Third party ETL Intertek tested 600 MHZ above) to support 1Gbps with Cross (+) filler pair seperator & PVC sheath 23 AWG, UTP Cable , Meets or exceeds ANSI/TIA- 568-C.2 and UL Listed &RoHS Compliant in the existing raceways /pvc conduits including making connections to information outlets and patch panels with ferruling at both ends for identifiation with necessary tools for punching stripping crimping and testing required etc., complete Makes: Systimax /AMP/ Panduit/ Siemond/ Molex/Legrand
3500
51
178850
... More
Supply and Fixing installation testing and commisioning of1no of Cat-6 Tooless built-in crimping mechanism Information Outlet with Dust Cover Exceed ANSI/TIA-568-C.2 and ISO/IEC 11801 standards with 1module face plate for Category 6 component performance & Compatible to T568A,T568B wiring pattern and UL-940V0 Rated Plastic &RoHS Compliant. Makes: Systimax /AMP/ Panduit/ Siemond/ Molex/Legrand
70
590
41356
... More
Supply installation testing and commisioning of 4 pair 23AWG Cat-6 UTP, flexible, double ended patch cords along with 2 nos of RJ 45 connectors with strain relief boots compatible to T568A,T568B specifications including making connections to information outlets of length - 1mtr/3 ft
Makes: Systimax /AMP/ Panduit/ Siemond/ Molex/Legrand
35
287
10059
... More
Supply installation testing and commisioning of 4 pair 23AWG Cat-6 UTP, flexible, double ended patch cords along with 2 nos of RJ 45 connectors with strain relief boots compatible to T568A,T568B specifications including making connections to information outlets of length - 2 mtr/7 ft
Makes: Systimax /AMP/ Panduit/ Siemond/ Molex/Legrand
35
338
11851
... More
Supply , Installation, Testing and Comissioning of Rack mounted 19", Cat 6 UTP,1.5-1.6 MM CRS chasis , powder coated Modular Patch Panels (upgradable to intelligent panels with use of sensor strips) with collapsible shutters on jacks to support latest ammendments of TIA / EIA Cat 6 Specifications in Existing Communication Rack along with necessary connections of Cat 6 UTP Cables, With Rear Cable management trays and clamps. 1) 12 Ports Patch Panels
Makes: Systimax /Legrand/Molex/Panduit/Siemond/AMP
5
5835
29175
... More
Supply and Fixing, Installation, Testing and Comissioning of Rack mounted 19", Cat 6 UTP,1.5-1.6 MM CRS Chasis, powder coated Modular Patch Panels (upgradable to intelligent panels with use of sensor strips) with collapsible shutters on jacks to support latest ammendments of TIA / EIA Cat 6 Specifications in Existing Communication Rack along with necessory connections of Cat 6 UTP Cables, With Rear Cable management trays and clamps.1) 24 Ports Patch Panels
Makes: Systimax /Legrand/Molex/Panduit/ Siemond/AMP.
10
8915
89150
... More
Supply and Fixing, Installation, Testing and Comissioning of Wall mounted Communication rack in two sections viz rear wall mount Section and hinged front section with glass doors, swing handles ,lock , Top and Bottom Cable entries,Supports for mounting rack on wall , Cable managers, Fan tray with 2 x 230 Volt fans, Equipment mounting hardware, wire managers , power supply box for supplying power to hubs, fans etc along with earth continuity kit, Mcb, indicator, moulded power supply cable, Blank panels , sliding shelves etc. 1) 6 U(44 mm ) wall mounted
Make: APW/HCL/Valrack/Netrack
6
9428
56573.4
... More
Supply and Fixing, Installation, Testing and Comissioning of Wall mounted Communication rack in two sections viz rear wall mount Section and hinged front section with glass doors, swing handles ,lock , Top and Bottom Cable entries,Supports for mounting rack on wall , Cable managers, Fan tray with 2 x 230 Volt fans, Equipment mounting hardware, wire managers , power supply box for supplying power to hubs, fans etc along with earth continuity kit, Mcb, indicator, moulded power supply cable, Blank panels , sliding shelves etc. 1) 9 U(44 mm ) wall mounted.Make: APW/HCL/Valrack/Netrack
3
11155
33467.7
... More
Supply and Fixing, Installation, Testing and Comissioning of Wall mounted Communication rack in two sections viz rear wall mount Section and hinged front section with glass doors, swing handles ,lock , Top and Bottom Cable entries,Supports for mounting rack on wall , Cable managers, Fan tray with 2 x 230 Volt fans, Equipment mounting hardware, wire managers , power supply box for supplying power to hubs, fans etc along with earth continuity kit, Mcb, indicator, moulded power supply cable, Blank panels , sliding shelves etc. 1) 12 U(44 mm ) wall mounted.
Make: APW/HCL/Valrack/Netrack
1
11299
11299
... More
Supply and Fixing, Installation ,Testing and Commissioning of Small Business 24 port Gigabit Managed Switch. Make :Cisco Model SG350-28 or equivalent in Juniper/Extreme
3
34766
104298.6
... More
Supply & Fixing of Cisco small business 8 port Gigabit POE Managed Switch , Make : Cisco Model:SG-350- 8PP or equivalent in Juniper/Extreme
6
28631
171786
... More
Supply, Installation, Testing and Commissioning of 32CH Embedded 4K NVR 4SATA expandable up to 40TB, audio input & Output, Two way communication supported, G7.11 audio format support, 320Mb recording throughput, 16 alarm inputs & 4 Outputs, RS485, Esata and RS232 to be supported with maximum 16 users, Op. temp -10 to 50 deg. C, NDAA compliant, UL/CE/FCC certified. makes Honeywell /Panasonic.
1
115649
115649
... More
Supply, Installation, Testing and Commissioning of 4MP or higher IR Dome, Fixed lens min 2.8mm DC Iris, 1/2.7" progressive CMOS image sensor, Min. Illumination 0.005 (color), S/N Ratio: 50dB, Electronics Shutter: 1/8 ~ 1/32000, IR Distance: 30M, with built in video analytics ,WDR~120dB/BLC/HLC/3D DNR, Gain Control: 0 ~100%; SD card up to 256GB, PAN: 0-355, Tilt: 0-75, Rotation: 0-354; Video Compression: H.265 HEVC/H.264/MJPEG, Smart Codec; Triple Stream; Protocals: H.265 HEVC/H.264/MJPEG, Smart Codec; ONVIF: S/G/T; Op. Temp: -40 to 60 Deg; power consumption max. 6W; IP67,IK10,UL,NDAA,BIS Compliance. Makes Honeywell / Sony /Panasonic.
16
15679
250864
... More
Supply, Installation, Testing and Commissioning of 4MP or higher IR Bullet, Fixed lens min 2.8mm DC Iris, 1/2.7" progressive CMOS image sensor, Min. Illumination 0.005 (color), S/N Ratio: 50dB, Electronics Shutter: 1/8 ~ 1/32000, IR Distance: 30M, with built in video analytics ,WDR~120dB/BLC/HLC/3D DNR, Gain Control: 0 ~100%; SD card up to 256GB, PAN: 0-355, Tilt: 0-75, Rotation: 0-354; Video Compression: H.265 HEVC/H.264/MJPEG, Smart Codec; Triple Stream; Protocals: H.265 HEVC/H.264/MJPEG, Smart Codec; ONVIF: S/G/T; Op. Temp: -40 to 60 Deg; power consumption max. 6W; IP67,IK10,UL,NDAA,BIS Compliance accessories mounts to be considered. makes Honeywell / Sony /Panasonic.
16
16133
258128
... More
Supply and installation of 4K UHD , 55” LED Display complete with following Specifications : a) Diagonal Size 55" b)Type Edge LED BLU. c) Resolution 3840*2160 (4K UHD) d) Pixel Pitch(mm)0.105 x 0.315. e) Active Display Area(mm)1209.6(H) x 680.4(V)f) Brightness(Typ.) 350 nit.g) Contrast Ratio 4000:1. Make- Samsung QB55R or its equivalent make in Dell / LG / Samsung / Lenovo / HP
1
108196
108196
... More
Supply and fixing of Surveillance HDD-4 TB.
Make: Seagate/Hitachi/TOSHIBA
1
23314
23314
... More
Supply and fixing of 8 PoE 10/100/1000 ports + 4 Gigabit SFP ports Web Smart Switch. Make:-D-Link Model No. DGS1210-8P or its equivalent make in Cisco/Netgear/HP
4
23314
93256
... More
Supply of Air cooled VRV / VRF Air Conditioning system of having high COP complete with indoor and outdoor units duly charged with refrigerant R-410A and oil (first charge) suitable for cooling with individual controller, (suitable for 415 +/- 10% for outdoor and 230 +/- 5% for indoor units) and complete with all accessories, fittings etc. The units shall be BMS Compatible. Outdoor Units shall be fully inverter system complete with 100% scroll/rotary compressor and drive arrangement, initial charge of refrigerant (R-410A),refrigerant piping, drier, sight glass, dual pressure cutout all housed and supported properly in cabinet, air cooled condenser & its controller for following capacities. The VRV system shall be cooling only system. Makes LG/Voltas/Blue star/Hitachi/Carrier/Samsung
Type of Compressor : Hermitic sealed Inverter Scroll/Twin Rotary
ODU should delvier the required capacity at the ambient conditions of the place as per ISHRAE Standards.
The System should be highly energy efficient and COP shall not be less than 3.7. The outdoor units shall be suitable for operation between 5 and 53 deg C in cooling mode. 20 HP
2
493884
987768
... More
Supply of Indoor Units consisting of 2/3/4 row deep DX coil, filter, blower section and drive arrangement, initial charge of refrigerant & oil, integral refrigerant piping, electronic expansion valve, electrical panel with controls and duly wired, thermostatic control. Roundflow/4 way Cassette units .Makes: LG/Voltas/Blue star/Hitachi/Carrier/Samsung 2.0 TR
5
60364
301820
... More
Supply of Indoor Units consisting of 2/3/4 row deep DX coil, filter, blower section and drive arrangement, initial charge of refrigerant & oil, integral refrigerant piping, electronic expansion valve, electrical panel with controls and duly wired, thermostatic control. Roundflow/4 way Cassette units .Makes: LG/Voltas/Blue star/Hitachi/Carrier/Samsung 3.2TR
3
67550
202650
... More
Supply of Indoor Units consisting of 2/3/4 row deep DX coil, filter, blower section and drive arrangement, initial charge of refrigerant & oil, integral refrigerant piping, electronic expansion valve, electrical panel with controls and duly wired, thermostatic control. Roundflow/4 way Cassette units .Makes: LG/Voltas/Blue star/Hitachi/Carrier/Samsung 4 TR
5
68987
344935
... More
Lifting Shifting, Positioning ,Installation Testing and commissioning of the following indoor units with including all required accessoires etc complete., Type Of Units :Round Flow /4 way Cassette units 2.6 TR to 4.5 TR
12
3527
42333
... More
Lifting, shifting, positioning, Installation and testing of the ODUs including all accessories with Vibration Isolators for ODUs etc., complete 14 to 20 HP
2
16933
33866
... More
Supply and transportation of R 410A Gas for the system. 14 to 20 HP
100
1309
130900
... More
Providing Pressure testing of entire system with Nitrogen and vaccuming nitrogen for all indoor and outdoor units. The pressure testing shall be done as per OEM recommendation.
100
1582
158200
... More
Supply, installation and testing of Refrigerant Piping consisting of Copper tubes of wall thickness 20G/22G inclusive of Suction Gas Piping & Fittings,Liqid Line Piping & Fittings, with class "O" nitrile rubber Insulation with finish as required.The piping to be mounted & supported properly with suitable size of clamp,M.S. hanger, tray etc., as required at site Makes : As per list of recommended brands.The insulation shall be closed cell/cross linked elastomeric Nitrile rubber of thickness 13/19 mm.The insulation thickness upto 19.1 mm dia pipe shall be 13 mm and above 19.1 mm dia, the insulation thickness shall be 19 mm.Testing of refrigerant piping and procedure shall be done as per Manufacturer's recommendations Makes:Totaline/Mandav/Mexico 34.9 mm dia
50
2186
109300
... More
Supply, installation and testing of Refrigerant Piping consisting of Copper tubes of wall thickness 20G/22G inclusive of Suction Gas Piping & Fittings,Liqid Line Piping & Fittings, with class "O" nitrile rubber Insulation with finish as required.The piping to be mounted & supported properly with suitable size of clamp,M.S. hanger, tray etc., as required at site Makes : As per list of recommended brands.The insulation shall be closed cell/cross linked elastomeric Nitrile rubber of thickness 13/19 mm.The insulation thickness upto 19.1 mm dia pipe shall be 13 mm and above 19.1 mm dia, the insulation thickness shall be 19 mm.Testing of refrigerant piping and procedure shall be done as per Manufacturer's recommendations Makes:Totaline/Mandav/Mexico 28.6 mm dia
100
1996
199600
... More
Supply, installation and testing of Refrigerant Piping consisting of Copper tubes of wall thickness 20G/22G inclusive of Suction Gas Piping & Fittings,Liqid Line Piping & Fittings, with class "O" nitrile rubber Insulation with finish as required.The piping to be mounted & supported properly with suitable size of clamp,M.S. hanger, tray etc., as required at site Makes : As per list of recommended brands.The insulation shall be closed cell/cross linked elastomeric Nitrile rubber of thickness 13/19 mm.The insulation thickness upto 19.1 mm dia pipe shall be 13 mm and above 19.1 mm dia, the insulation thickness shall be 19 mm.Testing of refrigerant piping and procedure shall be done as per Manufacturer's recommendations Makes:Totaline/Mandav/Mexico 22.2 mm dia
100
1805
180500
... More
Supply, installation and testing of Refrigerant Piping consisting of Copper tubes of wall thickness 20G/22G inclusive of Suction Gas Piping & Fittings,Liqid Line Piping & Fittings, with class "O" nitrile rubber Insulation with finish as required.The piping to be mounted & supported properly with suitable size of clamp,M.S. hanger, tray etc., as required at site Makes : As per list of recommended brands.The insulation shall be closed cell/cross linked elastomeric Nitrile rubber of thickness 13/19 mm.The insulation thickness upto 19.1 mm dia pipe shall be 13 mm and above 19.1 mm dia, the insulation thickness shall be 19 mm.Testing of refrigerant piping and procedure shall be done as per Manufacturer's recommendations Makes:Totaline/Mandav/Mexico 19.1 mm dia
90
1617
145530
... More
Supply, installation and testing of Refrigerant Piping consisting of Copper tubes of wall thickness 20G/22G inclusive of Suction Gas Piping & Fittings,Liqid Line Piping & Fittings, with class "O" nitrile rubber Insulation with finish as required.The piping to be mounted & supported properly with suitable size of clamp,M.S. hanger, tray etc., as required at site Makes : As per list of recommended brands.The insulation shall be closed cell/cross linked elastomeric Nitrile rubber of thickness 13/19 mm.The insulation thickness upto 19.1 mm dia pipe shall be 13 mm and above 19.1 mm dia, the insulation thickness shall be 19 mm.Testing of refrigerant piping and procedure shall be done as per Manufacturer's recommendations Makes:Totaline/Mandav/Mexico 15.9 mm dia
200
1426
285200
... More
Supply, installation and testing of Refrigerant Piping consisting of Copper tubes of wall thickness 20G/22G inclusive of Suction Gas Piping & Fittings,Liqid Line Piping & Fittings, with class "O" nitrile rubber Insulation with finish as required.The piping to be mounted & supported properly with suitable size of clamp,M.S. hanger, tray etc., as required at site Makes : As per list of recommended brands.The insulation shall be closed cell/cross linked elastomeric Nitrile rubber of thickness 13/19 mm.The insulation thickness upto 19.1 mm dia pipe shall be 13 mm and above 19.1 mm dia, the insulation thickness shall be 19 mm.Testing of refrigerant piping and procedure shall be done as per Manufacturer's recommendations Makes:Totaline/Mandav/Mexico 12.7 mm dia
20
1236
24720
... More
Supply, installation and testing of Refrigerant Piping consisting of Copper tubes of wall thickness 20G/22G inclusive of Suction Gas Piping & Fittings,Liqid Line Piping & Fittings, with class "O" nitrile rubber Insulation with finish as required.The piping to be mounted & supported properly with suitable size of clamp,M.S. hanger, tray etc., as required at site Makes : As per list of recommended brands.The insulation shall be closed cell/cross linked elastomeric Nitrile rubber of thickness 13/19 mm.The insulation thickness upto 19.1 mm dia pipe shall be 13 mm and above 19.1 mm dia, the insulation thickness shall be 19 mm.Testing of refrigerant piping and procedure shall be done as per Manufacturer's recommendations Makes:Totaline/Mandav/Mexico 9.5 mm dia
80
912
72960
... More
Supply, installation and testing of Refrigerant Piping consisting of Copper tubes of wall thickness 20G/22G inclusive of Suction Gas Piping & Fittings,Liqid Line Piping & Fittings, with class "O" nitrile rubber Insulation with finish as required.The piping to be mounted & supported properly with suitable size of clamp,M.S. hanger, tray etc., as required at site Makes : As per list of recommended brands.The insulation shall be closed cell/cross linked elastomeric Nitrile rubber of thickness 13/19 mm.The insulation thickness upto 19.1 mm dia pipe shall be 13 mm and above 19.1 mm dia, the insulation thickness shall be 19 mm.Testing of refrigerant piping and procedure shall be done as per Manufacturer's recommendations Makes:Totaline/Mandav/Mexico 6.4 mm dia
20
799
15980
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements