Andhra Pradesh Industrial Infrastructure Corporation Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Andhra Pradesh Industrial Infrastructure Corporation - APIIC Tender
Civil And Construction
Opening Date20 Nov 2024
Closing Date5 Dec 2024
Tender Amount₹ 6,25,77,259
Costs
EMD
₹ 6,26,000Document Cost
Refer DocumentsTender Fee
₹ 2,360
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
765807Tender No
08/CE(C)/APIIC/2024-25, Dated:20.11.2024Tender Authority
Andhra Pradesh Industrial Infrastructure Corporation ViewPurchaser Address
-Website
http://https://www.apiic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Filling with Dust in basement or foundation trenches with all leads in layers not exceeding 15 cms, consolidtaing each deposited layer by watering and ramming, all operational incidentil, labour charges, including cost and conveyance of water,sand to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)
136
947
128792
... More
Plain Cement Concrete (1:3:6) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for levelling course in foundations using 40mm size (SS5) hard,machine crushed HBG metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all charges for machine mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface smooth to the required level curing etc., complete for finished item of work. (APSS No. 402)
523
6473
3385379
... More
Random Rubble masonry in CM(1:6) using the hard variety stone of other than granite (OTG) from the including cost and conveyance of all materials like cement, water, sand, stone including the bond stones etc., to site,all labour charges for mixing of cement mortar,wall construction, curing etc.,complete for finished item of work in foundations and basement.
36
5465
196740
... More
Supply and placing of the Design Mix Concrete of grade M-25 corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.
-
-
-
... More
a) Column footings
183.5
12328
2262188
... More
b) Column Pedastals
33
12986
428538
... More
c) Plinth Beams
185
15093
2792205
... More
d) Columns
69
15938
1099722
... More
e) Roof Slabs (150 mm Thk)
3045
2548
7758660
... More
g) Roof Beams
192
13787
2647104
... More
Filling with useful available excavated earth(Excluding rock) in trenches sides of foundation and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and ramming including all operational ,incidental,labour charges of T&P etc.., complete for finished item of work as directed by Engineer -In -Charge.
1998
47
93906
... More
Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., cpomplete with a compresive strength not lessthan 50 kg/sqm for walls for Superstructure Walls.
495
8579
4246605
... More
Ornamental Plastering to Ceiling 12mm thick in single coat in CM(1:5) with dubara sponge finishing including cost and conveyance of all materials like cement, sand (screened), water etc., to site all materials and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing scaffolding,lift charges, curing including cutting grooves as directed by Engineer-in-charge etc., complete for finished item of work.
2339
216
505224
... More
Plastering 12 mm thick for INTERNAL WALLS in two coats, base coat in CM (1:5), 8mm thick and top coat in CM (1:3), 4mm thick with sponze finishing including cost and conveyance of all materials like cement,sand,water etc, to site all labour charges for mixing cement mortar finishing scaffolding curing etc., complete for finished item of work., as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904).
3290
632
2079280
... More
Plastering 12 mm thick for EXTERNAL WALLS in two coats, base coat in CM (1:5), 8mm thick and top coat in CM (1:3), 4mm thick with sponze finishing including cost and conveyance of all materials like cement,sand,water etc, to site all labour charges for mixing cement mortar finishing scaffolding curing etc., complete for finished item of work., as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904).
855
632
540360
... More
Painting to new walls with 2 coats of ready mixed oil bound wahsable distemper of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls as directed by Engineer -In -Charge.
3290
181
595490
... More
Painting walls with snowcem or other equal and approved water proof cement paint over priming coat,2 coats of approved brand and shade to give an even shade after thoroughly brushing the surface to nremove all dirt and remains of loose powdered materials including cost and conveyance of all materials to work site and all operations ,incidental,labour charges etc.., complete for finished item of work.(All colours) as directed by Engineer -In -Charge.
855
233
199215
... More
Painting two coats with synthetic enamel paint first grade to new iron works including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., complete for finished item of work as directed by Engineer -In -Charge.
665
97
64505
... More
Supply, fitting and placing TMT bar reinforcement (Fe 415) including decoiling, bending, cracking and tying them after placing in position as directed by the Engineer-In-Charge including cost and conveyance of steel and binding wire labour charges for all operations etc complete for finished item of work as directed by the Engineer in Charge and as per technical specification 1160 & 1600 Morth.
105
91446
9601830
... More
Flooring with Non-skid Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs of first quality of make set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid including neat cement slurry of honey like consistency spread at the rate of 3.3 kgs per Sqm. and filling the joints with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site, (excluding cost of C.C. bed) including cost of on all materials, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge curing etc., complete for finished item of work in all floors. (APSS No.701 & 707)
82
1173
96186
... More
Dadoing to walls with coloured glazed tiles of first quality of approved make and shade as directed by the Engineer in charge set over a base coat of CM(1:4) 12mm thick or jointed with cement mixed with the required quanitiy of colour pigment to match the shade of tiles including cost of all materials like tiles, cement, sand and water etc., including all labour charges, complete for finished item of work and as directed by Engineer -In -Charge.
130
733
95290
... More
Supply and fixing of rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer locks, ball bearings, all accessories etc complete for finished item of work as per special spn 1108.
663
5091
3375333
... More
Providing and fixing 30mm thick BRAND FACTORY MADE BOTHSIDE PRELAM SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of MS. Tubes of 19gauge thickness and size of 19mmX19mm for stiles, top and bottom rails. MS. Frame shall have a coat of steel primers of approved make and manufacture. MS. Frame covered with 5mm thick heat moulded “Rajshri” Prelam Pac ‘C’ channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 450 angle on either side forming stiles; and 5mm thick, 95mm wide Rajshri Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be tapered in 450 on the inner side to form top and bottom rail 115mm wide Rajshri Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rail shall be provided either side of the panel. 10mm (5mmX2) thick, 20mmwide cross Pac sheet shall be provided as gap insert for top and bottom rail. Panelling of 5mm thick both side Prelam Pac sheet to be fitted in the MS. Frame welded/ sealed to the stiles & rails with 7mm(5mm+2mm) thick X 15mm wide Pac sheet beading on inner side, and joined together with solvent cement adhesive etc. an additional 5mm thick Pac strip of 20mm width is to be stuck on the interior side of the ‘C’ channel using Pac solvent cement adhesive etc. complete as per direction of Engineer – in-charge, manufacture specification and drawing : Toilet door
2
3453
6906
... More
Gronolithic Concrete Flooring 50 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine crushed metal laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m x 1.50 m and finishing the top surface to required smoothness and slopes and thread lining including cost of all materials like cement, metal, sand and water etc., complete for finished item of work.
2410
528
1272480
... More
WATER SUPPLY & SANITARY
-
-
-
... More
Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware / Parryware / Neycer with brick - ISI mark and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern Parryware or equivalent with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, angle stop cock 12.70mm dia. first quality Indian make heavy duty Seiko/Senior/Nice or equivalent, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges etc., complete for finished item of work.
2
4672
9345.96
... More
Supply, Installation and commissioning approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat coverof approvedmake with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wallflanges all of approved make etc. complete for finished item of work in all respects:White Colour as directed by Engineer-in-charge.
2
10405
20810
... More
Supplying & Fixing Indian makeFlat Back Wash Hand Basin jaquar/Equavalent make 1st quality conforming to IS:2556-Part-4:1972 of 560x430x185mm ,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty 31.75mm dia PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.
4
2966
11864
... More
Supplying & fixing Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete for finished item of work as directed by the Engineer-In-Charge
250
325
81250
... More
Supplying and fixing of SWG Gully traps 150mm x 100mm of ISI make confirming to IS 651 & 4127 with C.I grating & cost. brick masonry in CM (1:6) prop., intermediate chamber and fitted with 304.8 mm X 288.6 mm (12"x9") C.I Frame with hinged cover of including labour charges for fixing and laying the SWG Junctions/Plugs/bends of any dia with air tight cement joints as per standard junctions complete for finished item of work as directed by the Engineer-In-Charge.
15
606
9090
... More
Supplying & fixing CI Nahany traps 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practice for 100 mm dia Inlet- 75 mm (3") outlet pipe - 4 Kgs complete for finished item of work in all floors as directed by the Engineer-In-Charge.
10
364
3640
... More
Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm including cost and conveyance of all materials, complete for finished item of work in all floors as directed by the Engineer-In-Charge.
2
570
1140
... More
Supplying and fixing NP bib taps of size 12.70mm dia of Indian make Seiko or Equivalent including cost and conveyance of all materials, labour charges etc., complete for finished item of work in all floors as directed by the Engineer-In-Charge.
15
282
4230
... More
Providing and placing on terrace (at all floor levels)polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks complete for finished item of work as directed by the Engineer-In-charge.
4000
10
40000
... More
Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS-778 Class - I , Indian make heavy type including cost and conveyance of all materials , labour charges etc., complete for finished item of work as directed by the Engineer-In-Charge.
8
1324
10592
... More
Supply of PVC 110 dia pipe for discharging of Terace rain water including cost and conveyance of all materials to site and all labour charges to finished item of work as directed by the Engineer-In-Charge.
150
240
36000
... More
Supply & fixing of Prince/sudhakar made or equivalent quality of PVC/SWR 110 dia pipe 6kg/cm2 including cost and conveyance of all materials to site and all labour charges to finished item of work as directed by the Engineer-In-Charge.
120
290
34800
... More
Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick masonary inspection chamber as per IS-4111:Part-1:1986 with cement mortar(1:6) prop using 2nd class clay bricks of 225mm thick approved source having a minimum crushing strength of 5 n/sq.mm including plastering with cement mortar 1:3 prop 1/2" thick both inside and outside fitted with 20"dia RCC manhole cover and frames including excavating pits upto a depth of 904mm (3'-0") in all sorts of soil (excluding rock) and laying cement concrete (1:4:8) 150mm thick using 40mm HBG metal and P.C.C 1:2:4 benching and channel 100mm thick as per standard specifications and including cost and conveyance of all materials like cement, sand,bricks,water etc., on all materials and all incidental and operational, labour charges like mixing cement mortar, construction masonary,lift charges,curing etc., complete for finished item of work as per standard specifications.
4
4214
16856
... More
Supplying and fixing NP soap dish heavy type with NP screws including cost and conveyance of all materialscomplete for finished item of work in all floors as directed by the Engineer-In-Charge.
4
262
1048
... More
Supply & fixing of Prince/sudhakar made or equivalent quality of PVC/SWR 110 dia pipe 6kg/cm2 including cost and conveyance of all materials to site and all labour charges to finished item of work.
-
-
-
... More
Plain Bends
15
87
1305
... More
Door Bends
18
114
2052
... More
Y Bend
18
143
2574
... More
Vent Cowl
18
20
360
... More
Pipe Clamp/Clips
35
19
665
... More
Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 590 x 375 x 390 mm of Ist quality including cost and conveyance of all materials, overheads and contractor's profit etc. complete for finished item of work in all respects.
6
3335
20010
... More
Supplying and fixing of 25.4mm dia , 609.6mm long aluminium anodized towel rods with brackets and aluminium screws including cost and conveyance of all materials, labour charges , for finished item of work as directed by the Engineer-In-Charge.
4
184
736
... More
Administrative Building
-
-
-
... More
Civil Works
-
-
-
... More
Earth work excavation for foundations and depositing on bank for all leads & lifts including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc complete for finished item of work including dewatering charges etc as per SS - 20 B (APSS 308).and as directed by the Engineer-in-charge
215
134
28810
... More
Filling with Dust in basement or foundation trenches with all leads in layers not exceeding 15 cms, consolidtaing each deposited layer by watering and ramming, all operational incidentil, labour charges, including cost and conveyance of water,sand to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)
15
947
14205
... More
Plain Cement Concrete (1:3:6) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for levelling course in foundations using 40mm size (SS5) hard,machine crushed HBG metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all charges for machine mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface smooth to the required level curing etc., complete for finished item of work. (APSS No. 402)
35
6473
226555
... More
Random Rubble masonry in CM(1:6) using the hard variety stone of other than granite (OTG) from the including cost and conveyance of all materials like cement, water, sand, stone including the bond stones to site,all labour charges for mixing of cement mortar,wall construction, curing etc.,complete for finished item of work in foundations and basement.
6
5465
32790
... More
Supply and placing of the Design Mix Concrete of grade M-25 corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.
-
-
-
... More
a) Column footings
17
12328
209576
... More
b) Column Pedastals
3
12986
38958
... More
c) Plinth Beams
19.5
15093
294313.5
... More
d) Columns
9
15938
143442
... More
g) Lintels(RCC)
1
15850
15850
... More
e) Roof Slabs (125 m Thk)
267
2363
630921
... More
f)Stair case waist slab (125mm Thk)
20
2363
47260
... More
g) Roof Beams
17
13787
234379
... More
h) Sun Shades of 0.6 mtrs of avearage thick of 0.0625 mtrs
7
1922
13454
... More
Filling with useful available excavated earth(Excluding rock) in trenches sides of foundation and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and ramming including all operational ,incidental,labour charges of T&P etc.., complete for finished item of work as directed by Engineer -In -Charge.
225
47
10575
... More
Providing Brick masonry for superstructure of all thickness in CM(1:6) prop. Using Fly ash bricks of size 290x225x140mm obtained from approved source having crushing strength not less than 50kg/sqcm and water absorption not exceeding 20% by weight ,including cost, and conveyance of all materials like cement,sand, bricks, water etc., to site including all labour charges like mixing cement mortor,wall construction,scaffolding charges,curing etc., complete for finished item of work for all heights.
18.04
8579
154765.16
... More
Reinforced brick masonry with half brick walls in CM (1:4) using solid cement flyash brick of 290x112x140mm size of approved make having crushing strength of not less than 50Kg/Sqcm and water absorption not exceeding 20% by weight and placing 2nos of 6mm MS roads in every 3rd layer including cost and conveyance of all materials like cement sand bricks water etc., to site, and all incidental and operationalcharges, labour charges like mixing cement mortar, construction of wall, scaffolding charges, curing, etc., complete for finished item of work, but excluding cost of steel and as directed by Engineer -In -Charge.
75.21
8629
648987.09
... More
Ornamental Plastering to Ceiling 12mm thick in single coat in CM(1:5) with dubara sponge finishing including cost and conveyance of all materials like cement, sand (screened), water etc., to site all materials and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing scaffolding,lift charges, curing including cutting grooves as directed by Engineer-in-charge etc., complete for finished item of work.
266.29
216
57518.64
... More
Plastering 12 mm thick for INTERNAL WALLS in two coats, base coat in CM (1:5), 8mm thick and top coat in CM (1:3), 4mm thick with sponze finishing including cost and conveyance of all materials like cement,sand,water etc, to site all labour charges for mixing cement mortar finishing scaffolding curing etc., complete for finished item of work., as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904).
595
632
376040
... More
Plastering 12 mm thick for EXTERNAL WALLS in two coats, base coat in CM (1:5), 8mm thick and top coat in CM (1:3), 4mm thick with sponze finishing including cost and conveyance of all materials like cement,sand,water etc, to site all labour charges for mixing cement mortar finishing scaffolding curing etc., complete for finished item of work., as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904).
196.25
632
124030
... More
Painting to new walls with 2 coats of ready mixed oil bound wahsable distemper of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls as directed by Engineer -In -Charge.
595
181
107695
... More
Painting walls with snowcem or other equal and approved water proof cement paint over priming coat,2 coats of approved brand and shade to give an even shade after thoroughly brushing the surface to nremove all dirt and remains of loose powdered materials including cost and conveyance of all materials to work site and all operations ,incidental,labour charges etc.., complete for finished item of work.(All colours) as directed by Engineer -In -Charge.
196
233
45668
... More
Painting two coats with synthetic enamel paint first grade to new wood work including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., complete for finished item of work as directed by Engineer -In -Charge.
50
97
4850
... More
Supply, fitting and placing TMT bar reinforcement (Fe 415) including decoiling, bending, cracking and tying them after placing in position as directed by the Engineer-In-Charge including cost and conveyance of steel and binding wire labour charges for all operations etc complete for finished item of work as directed by the Engineer in Charge and as per technical specification 1160 & 1600 Morth.
8.74
91446
799238.04
... More
Flooring with vitrified tiles of 1st quality of size 600x600 and 8mm-10mm thick glossy finish permium colours, set cover base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete for finished item of work and as directed by Engineer -In -Charge.
216
1469
317304
... More
Providing skirting to internal walls to 10 cm height with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved flooring pattern as directed by the Engineer-In -Charge, length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,complete for finished item of work.(APSS No.701 &707) as directed by Engineer -In -Charge.
16
1024
16384
... More
Flooring with Non-skid Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs of first quality of make set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid including neat cement slurry of honey like consistency spread at the rate of 3.3 kgs per Sqm. and filling the joints with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site, (excluding cost of C.C. bed) including cost of on all materials, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge curing etc., complete for finished item of work in all floors. (APSS No.701 & 707)
10
1173
11730
... More
Dadoing to walls with coloured glazed tiles of first quality of approved make and shade as directed by the Engineer in charge set over a base coat of CM(1:4) 12mm thick or jointed with cement mixed with the required quanitiy of colour pigment to match the shade of tiles including cost of all materials like tiles, cement, sand and water etc., including all labour charges, complete for finished item of work and as directed by Engineer -In -Charge.
32
733
23456
... More
Supply and fixing doors as per drawings with Sal Wood frame of section 100mm x 65 mm and ISI marked flush door shutters of 30 mm thick double shutters with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder coated fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1500mm x 2100mm) : Main door (1500mm x 2100mm)
7
3087
21609
... More
Supply and fixing doors as per drawings with Sal wood frame of section 100mm x 65 mm and ISI marked flush door shutters of 30 mm thick single shutter with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder coated fixtures of 3 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200 mm x 10 mm dia at top , 2 Nos. 150 mm long handles (IS:208), 1 No. door stopper and 1 No. rubber bush including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc.,complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1200mm x 2100mm) : Room door (1000mm x 2100mm)
10.2
3229
32935.8
... More
Providing and fixing 30mm thick BRAND FACTORY MADE BOTHSIDE PRELAM SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of MS. Tubes of 19gauge thickness and size of 19mmX19mm for stiles, top and bottom rails. MS. Frame shall have a coat of steel primers of approved make and manufacture. MS. Frame covered with 5mm thick heat moulded “Rajshri” Prelam Pac ‘C’ channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 450 angle on either side forming stiles; and 5mm thick, 95mm wide Rajshri Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be tapered in 450 on the inner side to form top and bottom rail 115mm wide Rajshri Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rail shall be provided either side of the panel. 10mm (5mmX2) thick, 20mmwide cross Pac sheet shall be provided as gap insert for top and bottom rail. Panelling of 5mm thick both side Prelam Pac sheet to be fitted in the MS. Frame welded/ sealed to the stiles & rails with 7mm(5mm+2mm) thick X 15mm wide Pac sheet beading on inner side, and joined together with solvent cement adhesive etc. an additional 5mm thick Pac strip of 20mm width is to be stuck on the interior side of the ‘C’ channel using Pac solvent cement adhesive etc. complete as per direction of Engineer – in-charge, manufacture specification and drawing. : Toilet door
3.78
3453
13052.34
... More
Supplying and fixing of window size 1.6 X 1.4m with sal wood frame of size 75 X 100mm and sal wood shutters made with styles & rails of 100mm X 30mm thick with S/F of 4 nos MS hold fasts, 6nos MS TOWER BOLTS 100MM LONG, 9 NOS ms HINGES 100mm long, 2nos MS handles , 3nos window stays including all labour charges and fixing Iron Grill with Flats and square bars .
12
16944
203328
... More
WATER SUPPLY & SANITARY
-
-
-
... More
Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware / Parryware / Neycer with brick - ISI mark and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern Parryware or equivalent with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, angle stop cock 12.70mm dia. first quality Indian make heavy duty Seiko/Senior/Nice or equivalent, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges etc., complete for finished item of work.
1
4672
4672.98
... More
Supply, Installation and commissioning approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat coverof approvedmake with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wallflanges all of approved make etc. complete for finished item of work in all respects:White Colour as rected by Engineer-in-charge.
2
10405
20810
... More
Supplying & Fixing Indian makeFlat Back Wash Hand Basin jaquar/Equavalent make 1st quality conforming to IS:2556-Part-4:1972 of 560x430x185mm ,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty 31.75mm dia PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.
2
2966
5932
... More
Supplying & fixing Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete for finished item of work as directed by the Engineer-In-Charge
40
325
13000
... More
Supplying and fixing of SWG Gully traps 150mm x 100mm of ISI make confirming to IS 651 & 4127 with C.I grating & cost. brick masonry in CM (1:6) prop., intermediate chamber and fitted with 304.8 mm X 288.6 mm (12"x9") C.I Frame with hinged cover of including labour charges for fixing and laying the SWG Junctions/Plugs/bends of any dia with air tight cement joints as per standard junctions complete for finished item of work as directed by the Engineer-In-Charge.
2
606
1212
... More
Supplying & fixing CI Nahany traps 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practice for 100 mm dia Inlet- 75 mm (3") outlet pipe - 4 Kgs complete for finished item of work in all floors as directed by the Engineer-In-Charge.
2
364
728
... More
Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm including cost and conveyance of all materials, complete for finished item of work in all floors as directed by the Engineer-In-Charge.
2
570
1140
... More
Supplying and fixing NP bib taps of size 12.70mm dia of Indian make Seiko or Equivalent including cost and conveyance of all materials, labour charges etc., complete for finished item of work in all floors as directed by the Engineer-In-Charge.
4
282
1128
... More
Providing and placing on terrace (at all floor levels)polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks complete for finished item of work as directed by the Engineer-In-charge.
1000
10
10000
... More
Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS-778 Class - I , Indian make heavy type including cost and conveyance of all materials , labour charges etc., complete for finished item of work as directed by the Engineer-In-Charge.
2
1324
2648
... More
Supply of PVC 110 dia pipe for discharging of Terace rain water including cost and conveyance of all materials to site and all labour charges to finished item of work as directed by the Engineer-In-Charge.
50
240
12000
... More
Supply & fixing of Prince/sudhakar made or equivalent quality of PVC/SWR 110 dia pipe 6kg/cm2 including cost and conveyance of all materials to site and all labour charges to finished item of work as directed by the Engineer-In-Charge.
20
290
5800
... More
Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick masonary inspection chamber as per IS-4111:Part-1:1986 with cement mortar(1:6) prop using 2nd class clay bricks of 225mm thick approved source having a minimum crushing strength of 5 n/sq.mm including plastering with cement mortar 1:3 prop 1/2" thick both inside and outside fitted with 20"dia RCC manhole cover and frames including excavating pits upto a depth of 904mm (3'-0") in all sorts of soil (excluding rock) and laying cement concrete (1:4:8) 150mm thick using 40mm HBG metal and P.C.C 1:2:4 benching and channel 100mm thick as per standard specifications and including cost and conveyance of all materials like cement, sand,bricks,water etc., on all materials and all incidental and operational, labour charges like mixing cement mortar, construction masonary,lift charges,curing etc., complete for finished item of work as per standard specifications.
2
4214
8428
... More
Supplying and fixing NP soap dish heavy type with NP screws including cost and conveyance of all materialscomplete for finished item of work in all floors as directed by the Engineer-In-Charge.
2
262
524
... More
Supply & fixing of Prince/sudhakar made or equivalent quality of PVC/SWR 110 dia pipe 6kg/cm2 including cost and conveyance of all materials to site and all labour charges to finished item of work.
-
-
-
... More
Plain Bends
6
87
522
... More
Door Bends
2
114
228
... More
Y Bend
2
143
286
... More
Vent Cowl
3
20
60
... More
Pipe Clamp/Clips
15
19
285
... More
Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 590 x 375 x 390 mm of Ist quality including cost and conveyance of all materials, overheads and contractor's profit etc. complete for finished item of work in all respects.
1
3335
3335
... More
Supplying and fixing of 25.4mm dia , 609.6mm long aluminium anodized towel rods with brackets and aluminium screws including cost and conveyance of all materials, labour charges , for finished item of work as directed by the Engineer-In-Charge.
2
184
368
... More
CC Storm Water Drains and Culvert
-
-
-
... More
For 1.50m Span culvert
-
-
-
... More
Earthwork excavation in soils upto SDR by mechanical means for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete for finished item of work, as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer-in-Charge
110
134
14740
... More
Dust filling in foundation including cost and conveyence of all materials to site and watering, tamping etc., complete for finshed item of work as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer - in - Charge.
13
947
12311
... More
Providing Vibrated Cement Concrete (1:4:8) using 40mm size HBG crushed stone aggregate and fine aggregate conforming to table 1000-2 of MoRT&H including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification 1500,1700, 2200 (5th Revision) and as directed by the Engineer-in-Charge.
17
5387
91579
... More
Providing HYSD bars ( Fe-500 ) of different diameters, wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinforcement including cutting, bending, binding rods, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and operational charges etc., and including over lapping welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings, as per the directions of the Engineer-in-Charge and as per MoRT&H specification 1600 & 2100 (5th revision) and as per I.S.1786 of 1985 for foundations of R.C.C items.
0.15
79953
11992.95
... More
Providing HYSD bars ( Fe-500 ) of different diameters, wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinforcement including cutting, bending, binding rods, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and operational charges etc., and including over lapping welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings, as per the directions of the Engineer-in-Charge and as per MoRT&H specification 1600 & 2200 (5th revision) and as per I.S.1786 of 1985 for Sub structure of R.C.C items.
0.6
80350
48210.07
... More
Providing HYSD bars ( Fe-500 ) of different diameters, wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinforcement including cutting, bending, binding rods, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and operational charges etc., and including over lapping welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings, as per the directions of the Engineer-in-Charge and as per MoRT&H specification 1600 & 2300 (5th revision) and as per I.S.1786 of 1985 for Super structure of R.C.C items.
0.5
82849
41424.72
... More
Vibrated reinforced cement concrete M 20 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per MoRT&H specification 1500,1600,1700 & 2100 (5th revision ) and as directed by the Engineer-in-Charge for for foundations
12
7173
86076
... More
Vibrated reinforced cement concrete M 20 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per MoRT&H specification 1500,1600,1700 & 2200 (4th revision ) and as directed by the Engineer-in-Charge for (Sub-structure)
40
7566
302640
... More
Vibrated reinforced cement concrete M 20 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per MoRT&H specification 1500,1600,1700 & 2300 (5th revision ) and as directed by the Engineer-in-Charge for Deck slab
6.5
8222
53443
... More
Vibrated reinforced cement concrete M 30 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per drawing BD/1-69( A) but excluding cost of steel and its fabrication charges as per MoRT&H specification 1500, 1600,1700, & 2702 (5th Revision) and as directed by the Engineer-in-Charge for wearing coat over Deck slab.
2
7288
14576
... More
Plastering in CM (1:5) 12 mm thick including cost and conveyance of all materials , labour charges , curing etc complete for finished item of work as directed by the Engineer -in-Charge
8
161
1288
... More
Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces etc complete for finished item of work as directed by the Engineer -in-Charge
8
124
992
... More
Earthwork excavation in soils upto SDR by mechanical means for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete for finished item of work as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer-in-Charge
864
134
115776
... More
Crusher Stone dust filling for foundations including cost and conveyence of all materials to site and watering, tamping etc., complete for finshed item of work as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer - in - Charge.
97
947
91859
... More
Providing Plain Cement Concrete (1:4:8) mix using 40mm size HBG crushed stone aggregate and fine aggregate conforming to table 1000-2 of MoRT&H including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, Vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification 1500,1700, 2100 (5th Revision) and as directed by the Engineer-in-Charge for base coarse
138
5387
743406
... More
Vibrated reinforced cement concrete M 20 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per MoRT&H specification 1500,1600,1700 & 2100 (5th revision ) and as directed by the Engineer-in-Charge for Raft
185
7173
1327005
... More
Vibrated reinforced cement concrete M 20 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per MoRT&H specification 1500,1600,1700 & 2100 (5th revision ) and as directed by the Engineer-in-Charge for walls
195
7566
1475370
... More
Providing HYSD bars ( Fe-500 ) of different diameters, wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinforcement including cutting, bending, binding rods, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and operational charges etc., and including over lapping welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings, as per the directions of the Engineer-in-Charge and as per MoRT&H specification 1600 & 2300 (5th revision) and as per I.S.1786 of 1985 for foundation of R.C.C items.
18
79953
1439154
... More
Supply and fixing of 25.40mm thick mastic pad for longitudinal expansion & contraction joints in CC drains including cost and conveyance of the A.C pipes and labour charges for cutting to required length, placing the mastic pad etc., complete for finished item of work
10
1090
10900
... More
CC Roads
-
-
-
... More
Excavation for roadwork in soil With hydrulic excavator including cutting , trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, with all lifts and lead and depositing the excavated soil on the banks in cluding all labour charges, hire charges of all T&P etc complete for the finished item of work as diercted by the Engineer - In - Charge as per Technical Specification Clause 302.3 MORD / 301 MORTH
154
79
12166
... More
Construction of Granular sub-base by providing HBG material confirming to Grading - III of MoRT&H Table 400-1 including cost and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge.
74
2322
171828
... More
Providing Dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing complete for finished item of work as per MoRT&H (5th Revision) specification 1500,1700 & 601 (5th Revision) and as directed by the Engineer-in-Charge for base coarse below CC Pavement
74
4224
312576
... More
Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing complete for finished item of work as per MoRT&H (5th Revision) specification 1500,1700 & 602 (5th Revision) and as directed by the Engineer-in-Charge
68.5
6134
420179
... More
ELECTRICAL ITEMS
-
-
-
... More
Supply and fixing of the following FRLS rigid PVC conduits with ISI mark conforming to IS:9537 Part-3, concealed in roof slab/wall with all required accessories, chisiling the wall, masonry work including cost, conveyance and labour charges with all incidental expenses etc., complete for Light/Fan/Exhaust fan/call bell points/separate plug points and circuits. [Makes: Sudhakar/Precision/ Polycab]
-
-
-
... More
PIPES CONCEALED IN ROOF SLABS FOR ADMN. BLDG
-
-
-
... More
20 mm outer dia - 2.10 mm thick - Heavy grade.
60
107
6420
... More
25 mm outer dia - 2.20 mm thick- Heavy grade.
250
120
30000
... More
PIPES CONCEALED IN WALLS FOR ADMN. BLDG
-
-
-
... More
20 mm outer dia - 1.55 mm thick - Medium grade.
50
98
4900
... More
25 mm outer dia - 1.80 mm thick- Medium grade.
250
111
27750
... More
32 mm outer dia - 2.10 mm thick - Medium grade.
100
139
13900
... More
PIPES CONCEALED IN ROOF SLABS FOR FFC
-
-
-
... More
25 mm outer dia - 2.20 mm thick- Heavy grade.
1230
120
147600
... More
PIPES CONCEALED IN WALLS FOR FFC
-
-
-
... More
25 mm outer dia - 1.80 mm thick- Medium grade.
400
111
44400
... More
Supply and fixing of the following P.V.C. pipe (ISI Mark) on surface with all accessories, fixing on Chromium plated metallic base saddles including cost, conveyance and all labour charges etc., complete. [Makes: Sudhakar/Precision/Polycab]
-
-
-
... More
50 mm outer dia -2.60 mm thick- Medium grade
-
-
-
... More
For FFC
160
214
34240
... More
Wiring with 3 runs of 14/0.3mm (1.0 Sq.mm) P.V.C. insulated F.R.L.S flexible copper wires (ISI MARK) of 1100 V grade as per IS: 694/1990 & IS:17048/2018 as phase, neutral and earth in existing pipe with 6A/10A-1 Way-1 Module Modular Switch, 3 Plate Jumbo ceiling rose, and 8 Modular Horizontal/Vertical Cover plate (frame) covering to 8/9 module Hot dip Galvanized 18 SWG GI Module Switch Control box with earthing terminal, including cost, conveyance and labour charges etc., complete for light, fan and exhaust fan points in non residential buildings. [Cable makes: Finolex/Havells/Polycab; Switches and Frame makes: Legrand (Myrius/ Lyncus)/Schneider(Clipsal X /Livia AB)/Crabtree (Murano/Athena)]
-
-
-
... More
For FFC
544
1278
695232
... More
For Admn. Bldg.
50
1278
63900
... More
Supply and fixing of 6A/10A - 3 Pin, 2 Module, Modular Socket with Shutter and 6A/10A -1 Way, 1 Module, Modular Switch on a Common Switch board, including cost, conveyance and labour charges etc., complete. [Makes: Legrand (Myrius/Lyncus)/ Schneider(Clipsal X/Livia AB)/Crabtree (Murano/Athena)]
-
-
-
... More
For FFC
67
298
19966
... More
For Admn. Bldg.
8
298
2384
... More
Supply and fixing of 3 Nos. 6A/10 A-3 Pin, 2 Module, Modular Socket with Shutter and 2 Nos. 6A/10A, 1 Way, 1 Module, Modular Switches mounted on 8/9 module Hot Dip galvanized 18 SWG Module metal box with earthing terminal and covered with an appropriate modular cover plate with metal frame in recess, including cost, conveyance and labour charges etc., complete. [Makes: Legrand (Myrius/ Lyncus)/Schneider(Clipsal X/Livia AB)/ Crabtree (Murano/Athena)]
-
-
-
... More
For Admn. Bldg.
10
1371
13710
... More
Supply and fixing of 16A/6A, 1 way, Combi Modular Socket with shutter and 16A modular switch mounted on 3 module Hot Dip galvanized 18 SWG Module metal box for Switch Board with earthing terminal and covered with an appropriate modular cover plate with metal frame in recess, including cost, conveyance and labour charges etc., complete. [Makes: Legrand (Myrius/Lyncus)/ Schneider(Clipsal X/Livia AB)/ Crabtree (Murano/Athena)]
-
-
-
... More
For Admn. Bldg.
2
813
1626
... More
Supply and fixing of Metal Enclosure conforming to IEC 61439-3 equipped with Neutral link, Plug and Socket (2P+E) and 1 No. 20 A-10 kA SP MCB (C-Curve) protection of appliances like AC/Geyser etc., suitable for flush mounting (concealing) including cost, conveyance and all materials and labour charges etc., complete. [Make: Legrand (Ekinox) : Cat no. 5078 11]
-
-
-
... More
For Admn. Bldg.
2
3736
7472
... More
Supply and fixing of 6A/10A - 3 Pin, 2 Module, Modular Socket with Shutter with 6A/10A, 1 Way, 1 Module, Modular Switch mounted on 3 module Hot Dip galvanized 18 SWG Module metal box for Switch Board with earthing terminal and covered with an appropriate modular cover plate with metal frame in recess, including cost, conveyance and labour charges etc., complete [Makes: Legrand (Myrius/Lyncus)/Schneider (Clipsal X/Livia AB) /Crabtree (Murano/Athena)]
-
-
-
... More
For Admn. Bldg.
6
657
3942
... More
Supply and run of the following ISI marked FRLS/FRLS-H/HFFR/ZHFR PVC insulated flexible copper cables of 1100 V grade as per IS: 694/1990 & IS:17048/2018 specification for Phase, Neutral and Earth in existing PVC conduit for mains/circuit mains including cost, conveyance and labour charges etc., complete [Makes: Finolex/RR kabel /Havells/ KEI/Polycab]
-
-
-
... More
2 Runs of 2.5 Sq.mm (P, N) + 1 Run of 1.5 Sq.mm (E) Copper Cables with Colour Coding
-
-
-
... More
For FFC
1100
114
125400
... More
For Admn. Bldg.
600
114
68400
... More
4 Runs of 6.0 Sq.mm (R, Y, B and N) and 1 Run of 2.5 Sq.mm (E) copper cables with Colour Coding
-
-
-
... More
For FFC
10
427
4270
... More
2 Runs of 4 Sq.mm (P, N) and 1 Run of 2.5 Sq.mm (E) copper cables with Colour Coding
-
-
-
... More
For Admn. Bldg.
150
175
26250
... More
4 Runs of 10 Sq.mm (R,Y,B and N) and 1 Run of 4 Sq.mm (E) copper cables with Colour Coding
-
-
-
... More
For Admn. Bldg.
10
638
6380
... More
Trench Work : Excavation of earth for a cable trench of 0.3 m (Width) and 0.90 m (Depth) in soft soil for laying HDPE pipe and re-filling the trench with excavated soil to original position as required.
-
-
-
... More
For FFC
175
108
18900
... More
For Admn. Bldg.
30
108
3240
... More
Supply, laying and fixing 65 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 in ground with G.I fittings including cost, conveyance and labour charges etc., complete. [Makes: Tata/Zenith/Jindal]
-
-
-
... More
For FFC
12
531
6372
... More
For Admn. Bldg.
12
531
6372
... More
DWC HDPE pipes : Supply, transportation and laying of the following double walled corrugated (DWC) HDPE pipe having corrugation on the outer wall and plain surface inner wall conforming to BSEN-500 86/IS : 14930 Part - II along the cable trench dug out in soil for safeguarding UG cable with all accessories like couplers, bends, end caps, Tees etc., complete, including cost, conveyance, and labour charges etc., complete but, excluding charges for soil excavation and back filling charges. [Makes : DURA LINE (Dura Guard)/Precision/CPE or any ISI approved make having ISI mark]
-
-
-
... More
50 mm outer dia and inner dia 38 mm
-
-
-
... More
For FFC
10
137
1370
... More
For Admn. Bldg.
10
137
1370
... More
63 mm outer dia and inner dia 51 mm
-
-
-
... More
For FFC
10
598
5980
... More
For Admn. Bldg.
6
598
3588
... More
Supply and fixing of the following Porcelain Re-Wirable fuse units on existing board and Neutral link with connections as required, including cost, conveyance and labour charges etc., complete.
-
-
-
... More
3 Nos. 300 A-415 V Porcelain Rewirable fuse Units with 200 A-415 V Neutral link
-
-
-
... More
For FFC
1
5827
5827
... More
3 Nos. 100 A-415 V Porcelain Rewirable fuse Units with 63 A-415 V Neutral link
-
-
-
... More
For Admn. Bldg.
1
2894
2894
... More
Supply and fixing of Pre-Laminated Cement Bonded Particle Board (Bison Lam) Conforming to 15786 - 18 mm Thick including cost, conveyance and labour charges etc., complete.
-
-
-
... More
For FFC
1
1365
1365
... More
For Admn. Bldg.
1
1365
1365
... More
Supply and fixing of 8 Way SPN Distribution board with IP-43 protection suitable for 40 A single phase (DP) Isolator as incomer and 6 nos. (6-32) A range, 10 kA, SP MCBs as outgoers including cost, conveyance and labour charges for surface/flush mounting with internal connections etc., complete for LIGHTING. [Makes: Legrand (Ekinox 3)/Schneider-Acti9/Hager-Novello+/Seimens]
-
-
-
... More
For Admn. Bldg.
1
5369
5369
... More
Supply and fixing of 4 Way Horizontal TPN Distribution board with IP-43 protection suitable for 1 No. 63 A FP Isolator as Incomer and 12 Nos. (6-32) A range 10 kA SP MCBs (C-Curve) as Outgoers with Bus-bar arrangements as per IS 8623; IS 13032; IEC 61439-3 including cost, conveyance and labour charges for surface/flush mounting with internal connections etc., complete as POWER DB. [Makes: Legrand (Ekinox3)/Schneider-Acti9/Hager-Novello+/ Seimens]
-
-
-
... More
For FFC
3
10032
30096
... More
For Admn. Bldg.
1
10032
10032
... More
Supply and run of 4 of 16 Sq.mm WPSC Aluminium cable along with No. 10 SWG G.I bearer wire through PVC cleats with all accessories including cost, conveyance and labour charges etc., complete for service mains.
-
-
-
... More
For Admn. Bldg.
30
216
6480
... More
PANEL BOARD FOR LT-3-PHASE ENERGY METERS:
Supply, Installation, Testing and Commissioning of free-standing floor mounted dust and vermin proof compartmentalized cubical panel of size 2000 mm (L) x 1850 mm (H) x 400 mm (D) made out of CRCA sheet with provision for mounting 8 nos. of 3-phase energy meter services on Bison Lam with crystal transparent meter glasses and change over, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated/epoxy/PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear with all necessary supports. The thickness of sheet shall not be less than 2.0 mm. The load bearing structure shall be of 2.0 mm thick sheet supported by base M.S channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator). All feeders shall be earthed with 2 Nos. GI flats of adequate size to the main earth bus of 25 x 6 mm GI Flat with the following Switch gears and associated equipments.
-
-
-
... More
a) Incomer : 1 No. 160 A - 4 Pole MCCB with Thermal- Magnetic release with 50 kA Breaking Capacity (Icu) at 415V AC- 50 Hz with "Extended ROM" and suitable termination arrangements for multi-cables. [Makes: L&T(D sine)/Schneider (CVS)/Legrand (DP X3/DRX)/ Siemens(3VL)]
b) Outgoers: NIL
c) Bus Bars: 20 mm (Width) x 10 mm (Thick) Electrolytic grade Aluminium bus-bars with SMC/DMC type insulators of required shape and size and colour coding with heat shrinkable PVC sleeves etc., complete.
d) Phase Indication Lamps : 240/220 V, LED (22.5 mm dia) "Pilot lamp with integral circuit, terminal block as required.
e) Digital Voltmeter - 1 No. [Makes: Conzerve/ Elmeasure/Meco/ HPL/ L&T/Socomec]
f) Digital Ammeter - 1 No. [Makes: Conzerve/ Elmeasure/ Meco/ HPL/ L&T/ Schneider/Socomec] g) Current Transformers - 3 Nos. [Makes : Kappa/ L&T/Seimens/C&S/Schneider]
-
-
-
... More
For FFC
3
110536
331608
... More
Supply and fixing of 12 Way SPN Distribution board with IP-43 protection suitable for 1 No. 32 A DP Isolator as Incomer and 10 Nos. (6-32) A range 10 kA SP MCBs (C-Curve) as Outgoers with Bus-bar arrangements as per IS 8623; IS 13032; IEC 61439-3 including cost, conveyance and labour charges for surface/flush mounting with internal connections etc., complete for lighting [Makes: Legrand (Ekinox 3)/Schneider-Acti9/Hager-Novello+/Seimens]
-
-
-
... More
For FFC
3
6215
18645
... More
Supply and fixing of 18-20W, not less than 1100 mm length LED batten light with extruded Aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy 120 lumens/watt, PF 0.9, Surge protection: 2KV, THD 15%, with inbuilt driver and frosted cover CCT: 5700 K, minimum CRI 70, etc., complete with earth connection and not less than two years warranty. [LUMINAIRE MAKES : Philips/ GE- Venture/Crompton/ Wipro/Halonix; b) LED MAKE : PHILIPS LUMILEDS/CREE/NICHIA/OSRAM/ SAMSUNG/Everlight]
-
-
-
... More
For FFC
138
700
96600
... More
For Admn. Bldg.
24
700
16800
... More
Supply and fixing of Batten holder/Slanting holder in lieu of ceiling rose of light point with 7 W LED bulb (for new installation) with connections including cost, conveyance and labour charges etc., complete. [Holder makes: GM (G Home)/Gold Medal (Olive)/Havells (Reo); Makes: Philips /Crompton/Havells]
-
-
-
... More
For FFC
70
250
17500
... More
For Admn. Bldg.
5
250
1250
... More
Supply and installation of 10 W LED Bulkhead fitting with Pressure die cast aluminum with opal diffuser with IP 65 protection etc., complete. [Makes : Philips/Crompton/Havells ]
-
-
-
... More
For Admn. Bldg.
3
1183
3549
... More
Supply and fixing of 24 W Slim Panel LED Down lighter, Recessed/Surface mounting made of die-cast Aluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/Sec 13) : 2012, operating voltage range of 150-265V AC, P.F 0.9, Surge protection: 2 kV, THD 10%, with high power LED's having efficacy of 100 lumens/watt, CCT: 5700 K, minimum CRI 70 etc., complete. [a) LUMINAIRE MAKES : Signify/Crompton/ Wipro/GE-Venture; b) LED MAKES : PHILIPS LUMILEDS/CREE/ NICHIA/OSRAM/SAMSUNG]
-
-
-
... More
For Admn. Bldg.
1
1509
1509
... More
Supply and fixing of Anchor fastener with fan hook/Providing MS Fan hook with grouting and cement plastering.
-
-
-
... More
For FFC
200
148
29600
... More
For Admn. Bldg.
10
148
1480
... More
Supply and fixing of 2 Module Modular type Electronic Step type Fan Regulator on existing modular plate switch box with connections as required including cost, conveyance and labour charges etc., complete. [Makes: Legrand (Myrius/ Lyncus)/Schneider(Clipsal X /Livia AB)/Crabtree (Murano/Athena)]
-
-
-
... More
For FFC
200
533
106600
... More
For Admn. Bldg.
10
533
5330
... More
Supply, installation, testing and commissioning of 48" (1200 mm) Sweep Ceiling Fan with double ball bearings, air delivery more than 200 cubic meter/min etc., including cost, conveyance and labour charges for giving connections with 23/0060 Twin Core Twisted wire/flat heavy Copper wire etc., complete. [Makes: Crompton (HS Plus/HS)/Havells (ES PLUS/SS390ES) /Orient Energy Star/Halonix(Zephyr)]
-
-
-
... More
For FFC
6
2919
17514
... More
For Admn. Bldg.
10
2919
29190
... More
Supply, installation, testing & Commissioning of 12" (300 mm) ISI, 900 R.P.M Heavy duty exhaust fan with metallic blades, GI Louver shutter including cost, conveyance and labour charges for fixing exhaust fan in wall with necessary connections and masonry work of making hole, finishing etc., complete. [Makes: Crompton/Almonard/Havells Ventil Air-DB]
-
-
-
... More
For FFC
4
4645
18580
... More
For Admn. Bldg.
2
4645
9290
... More
Providing independent earthing by excavating a pit to a depth of 2.10 m with 0.6 m dia in soil using 40 mm dia 'B' class GI pipe as per IS 1239 (ISI mark) of 2.5 m length with tapered casting at the lower end having staggered holes, filling up the surrounding space around the pipe with Bentonite powder of 300 kg up to 1.8 m from the bottom and remaining space of the pit with loose earth and fixing hume pipe ring (3 mm Thick) with necessary accessories and proper connections including cost, conveyance of all materials, and labour charges etc., complete.
-
-
-
... More
For FFC
6
4761
28566
... More
For Admn. Bldg.
2
4761
9522
... More
Supply and laying of the following G.I wire Earth wire/Strip in horizontal/ Vertical run in Ground/ surface/Recess including, revitting, soldering, saddles, making connections etc., as required.
-
-
-
... More
8 SWG G.I Wire (0.104 kg/m)
-
-
-
... More
For FFC
401
11
4411
... More
For Admn. Bldg.
10
11
110
... More
25mm x 3mm GI Flat (0.656 kg/m)
-
-
-
... More
For FFC
30
62
1860
... More
For Admn. Bldg.
10
62
620
... More
Supply, Installation, Testing and Commissioning of free-standing floor mounted dust and vermin proof compartmentalized cubical panel of size 1600 mm (L) x 2000 mm (H) x 400 mm (D) made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated/epoxy/PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear with all necessary supports.
-
-
-
... More
The thickness of sheet shall not be less than 2.0 mm. The load bearing structure shall be of 2.0 mm thick sheet supported by base M.S channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator). All feeders shall be earthed with 2 Nos. GI flats of adequate size to the main earth bus of 25 x 6 mm GI Flat with the following Switch gears and associated equipments.
-
-
-
... More
a) Incomer : 1 No. 400 A - 4 Pole MCCB with Thermal- Magnetic release and 50 kA Breaking Capacity (Icu) at 415V AC - 50 Hz with "Extended ROM" and suitable termination arrangements for multi-cables. b) Metering : 1 No. Energy Analyzer (multi-function energy meters) with LCD/LED display capable of minimum 20 numbers electrical parameters display with 1A/5A CT input for LV/HV network, RS 485 communication port with 240/220 V, LED (22.5 mm dia) "Pilot lamps with integral circuits, terminal blocks" for EB Power and 3 Nos. 400/5 ratio, 10 VA, class 1 accuracy Current Transformers. c) Outgoers: 1 No. 250 A - 4 Pole MCCB (Icu : 50 kA) 2 Nos. 160 A - 4 Pole MCCBs (Icu : 50 kA) 4 Nos. 63 A - 4 Pole MCBs (10 kA, C-Curve)
-
-
-
... More
d) Bus-bars : Electrolytic grade Aluminium bus-bars of the following sizes with SMC/DMC type insulators of required shape and size and colour coding with heat shrinkable PVC sleeves etc., complete.
Main Bus Bar: 50 mm (Width) x 10 mm (Thick)
40 mm (Width) x 12 mm (Thick) for 400 A Incomer
30 mm (Width) x 10 mm (Thick) for 250 A Outgoer
20 mm (Width) x 10 mm (Thick) for 160 A Outgoers MCCB makes: L&T (D shine)/Schneider (CVS)/Legrand (DP X3/DRX)/Siemens(3VL)]
MCB makes: Legrand/Schneider/L&T/Seimens
Energy Analyser makes : Elmeasure/Schneider Current Transformer makes: Kappa/L&T/Seimens/ C&S/Schneider
-
-
-
... More
For FFC
1
251237
251237
... More
Supply, transportation and laying of the following XLPE insulated 1100 V grade Armoured Aluminium UG cable as per specification conforming to IS: 7098 (Part-I)/1554-I in existing G.I/HDPE pipe laid along the dug out cable trench including cost, conveyance, testing, and labour charges etc., complete. [Makes: Havells/ KEI/Polycab]
-
-
-
... More
16 Sq.mm x 4 core
-
-
-
... More
For power supply extension in FFC
86
252
21672
... More
25 Sq.mm x 3.5 core
-
-
-
... More
For fire fighting system in FFC
36
303
10908
... More
50 Sq.mm x 3.5 core
-
-
-
... More
For fire fighting system in FFC
36
496
17856
... More
70 Sq.mm x 3.5 core
-
-
-
... More
For power supply extension in FFC
48
655
31440
... More
150 Sq.mm x 3.5 core
-
-
-
... More
For fire fighting system in FFC
115
1169
134435
... More
400 Sq.mm x 3.5 core
-
-
-
... More
For power supply extension in FFC
80
2211
176880
... More
Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Aluminium lugs duly crimped with crimping tool, PVC tape etc., for the following Armoured PVC insulated & PVC sheathed/XLPE Aluminium conductor cable of 1100 volt grade as required. [Makes: Dowells/Comet/SMI]
-
-
-
... More
4 core x 16 Sq.mm
-
-
-
... More
For power supply extension to FFC
6
316
1896
... More
3.5 core x 25 Sq.mm
-
-
-
... More
For fire fighting system in FFC
4
310
1240
... More
3.5 core x 50 Sq.mm
-
-
-
... More
For fire fighting system in FFC
4
482
1928
... More
3.5 core x 70 Sq.mm
-
-
-
... More
For power supply extension to FFC
6
715
4290
... More
3.5 core x 150 Sq.mm
-
-
-
... More
For fire fighting system in FFC
2
1237
2474
... More
3.5 core x 400 Sq.mm
-
-
-
... More
For power supply extension to FFC
2
3299
6598
... More
Street lights on utility poles around FFC
-
-
-
... More
Supply, installation, testing and commissioning of 60 W rated power (max.) LED Street light luminaire with housing fabricated from Pressure die cast or extruded Aluminium with a grey paint/powder coating, an extra clear toughened glass/PC diffuser, IK ≥ 07, Conforming to IP 66, High power LEDs with Secondary optic lens achieving overall system efficacy 120 lm/W @ CCT 5700 K or 4000 K (ANSI), CRI (Ra) ≥ 70, Junction temp. 70 deg. C, lifetime residual flux of 70% (L70) @ 50,000 burning hours at Ta = 35 deg. C, powered by BIS certified Potted (Constant Current) Driver having efficiency 90%, input voltage : 120 V-270 V AC, freq.: 50/60 Hz, P.F 0.9, T.H.D 10% at 110 V AC, internal surge protection of 4/4 kV and an additional surge protection device (SPD) of 10/10 kV (in both Common & Differential Modes) with luminaire
-
-
-
... More
performance complying to IS 10322 (Part 5/Sec-3) and warranty not less than two years etc.,complete for mounting on existing utility pole with 1.5 m long - 32 mm Nominal Bore GI pipe with light grade properties & weight as per IS 1239 (ISI mark) with suitable bent and 2 Sets of MS Clamps fabricated from 32 x 5 mm thick MS Flat duly coated with 1 coat of Zinc chromate red oxide primer paint and 2 coats of Grade-I Aluminium Paint with nuts and bolts, 10.0 m long 2.5 Sqmm WPSC (Weather Proof Single Core) ISI Aluminium Wire for Phase and Neutral for extension of supply to street light luminaire, including cost of all materials, conveyance, labour and incidental charges etc., complete. [a) LUMINAIRE MAKES : Wipro (Skyline Plus)/Signify (Urban Edge Plus)/GE-Venture (Caris Neo)/ Crompton (Raptor Pro)/Kesslec; b) LED MAKES : PHILIPS LUMILEDS/CREE/ NICHIA/OSRAM/ SAMSUNG/LG]
-
-
-
... More
On Utility poles around FFC
6
6373
38238
... More
YARD LIGHTING AROUND ADMN. BLDG.
-
-
-
... More
Supply, installation, testing and commissioning of 60 W rated power (max.) LED Street light luminaire with housing fabricated from Pressure die cast or extruded Aluminium with a grey paint/powder coating, an extra clear toughened glass/PC diffuser, IK ≥ 07, Conforming to IP66, High power LEDs with Secondary optic lens achieving overall system efficacy 120 lm/W @ CCT 5700 K or 4000 K (ANSI), CRI (Ra) ≥ 70, Junction temp. 70 deg. C, lifetime residual flux of 70% (L70) @ 50,000 burning hours at Ta = 35 deg. C, powered by BIS certified Potted (Constant Current) Driver having efficiency 90%, input voltage : 120 V-270 V AC, freq.: 50/60 Hz, P.F 0.9, T.H.D 10% at 110 V AC, internal surge protection of 4/4 kV and an additional surge protection device (SPD) of 10/10 kV (in both Common & Differential Modes) with luminaire performance complying to IS 10322 (Part 5/Sec-3) with warranty not less than two years etc., for mounting on wall with 1.5 m long 32 mm Nominal Bore GI pipe with light grade properties & weight as per IS 1239 (ISI mark) with suitable bent and MS Clamps, including cost of all materials, conveyance, labour and incidental charges etc., complete. [a) LUMINAIRE MAKES : Wipro (Skyline Plus)/Signify (Urban Edge Plus)/GE-Venture (Caris Neo)/Crompton (Raptor Pro)/Kesslec; b) LED MAKES : PHILIPS LUMILEDS/CREE/NICHIA/ OSRAM/ SAMSUNG/LG]
-
-
-
... More
On wall around Admn. Bldg.
4
5868
23472
... More
External Power Infrastructure
-
-
-
... More
Supply and erection of single pole structure with 9.1 m PSCC Pole (including earthing with 25 (Width) x 3 mm (Thick) GI flat and 4 mm GI wire duly erecting 1 No. CI pipe and 2 Nos. GI pipes), 11 kV 200A AB Switch (Tilting) with polymer type insulators, erection of 11 kV H.G Fuse set, LT Metering arrangements with CTs including cable (185 sq.mm Single Core XLPE) connections and cleat arrangements, AMR Unit, A type distribution box of 2-feeder with 500V, 300A fuse units, 3 nos. HT Lightening Arrestors with Misc. Items (Danger boards, Bolts & Nuts etc.,) and pole concreting, cost of all materials, labour and transportation charges etc., complete. (Makes: As per approved vendor list of APEPDCL and the Agency is responsible for getting approval of makes and handing over of material to APEPDCL).
-
-
-
... More
For extension of supply to FFC and Admn. Bldg.
1
57472
57472
... More
Supply and erection of 11 kV line (Single Circuit) with 100 Sq.mm AAA Conductor over 11 m Spun Poles at 50 m Span, 100 kg/Sq.m wind pressure, working load 350 kg with necessary materials, labour and transportation charges etc., complete. (Makes: As per the approved vendor list of APEPDCL and the Agency is responsible for getting approval of make and handing over of material to APEPDCL).
-
-
-
... More
For extension of supply to FFC and Admn. Bldg.
0.1
988303
98830.3
... More
Supply, Transportation, Installation, Testing and Commissioning of 11/0.433 kV, 160 kVA TRANSFORMER designed and manufactured as per BIS Energy Efficiency Level - 2 (Star-2) at basic Insulation level conforming to IS-1180 (Part-I) : 2014 latest amended, OCTC (Off-Circuit Tap Changer) with initial filling of oil as per IS-335/1993. The basic details of Transformer are as under and shall be guaranteed for 5 years from the date of supply. 1. Quantity : 1 No. 2, Rated kVA :160 kVA, 3. Service & Location: Continuous Outdoor Distribution Transformer, 4. Mounting : Plinth, 5. Wound : Copper Double wound, 6. Type : Core type oil immersed, 7. Cooling : ONAN (Oil natural air natural), 8. Temp. Rise : The temperature rise over ambient shall not exceed the limits given: 40⁰ C in oil measured by Thermometer and 45⁰ C in Winding by resistance method, 9. Vector Group: Dyn 11, 10. Primary Connection : Delta, 11. Nominal Voltage (HV)/Current (HV) : 11 kV/8.398 A, 12. Highest system Voltage: 12000 V, 13.
-
-
-
... More
Primary Frequency :50 Hz +/- 3%, 14. Number of Phases : 3, 15. Primary wires: 3, 16. Secondary connection : Star, 17. Secondary Volts/Current : 433 V/213.34 A, 18. Secondary phases : 3, 19. Secondary wires: 4, 20. Taps on primary winding for primary voltage variation : +5% to - 10% in steps of 2.5% of 7 tap position (6 Steps) 21. Terminal arrangement. a. HV: HT terminal box as per the site condition, b. LV: Cable box suitable to receive 185 Sq.mm XLPE cable, 22. LV: One separate terminal for earthing, 23. Total Losses at 50% Loading [Watts] @ 75 deg. C [Max] 570 W as per IS, 24. Total Losses at 100% Loading [Watts] @ 75 deg. C [Max] 1700 W as per IS 25. Percentage Impedance at 75 deg. C at 4.5% as per IS:2026, 26. No Load current: Less than 2% of full load current, 27. Standard Fittings & Accessories : a. Rating and terminal marking plate: One, b. Lifting Lugs: Two, c. Off-circuit tap switch : One d. Earthing Terminals : Two e. Radiators (Attachable) : Adequate
-
-
-
... More
f. Explosion vent with Diaphragm : One, g. Conservator with Drain plug: one, h. Oil filling hole with cap : One, i. Oil level indicator : One, j. Dehydrating Silica gel Breather : One, k. Terminal Arrangement: HV With Terminal Box, l. Terminal Arrangement : LV Cable Box, m. Separate Neutral Bushing : One, n. Drain cum filter valve with blanking plate: One, o. Air release device : One, p. Thermometer Pocket : One, q. Four : Unidirectional flat rollers, r. One :10 cm dial thermometer (Rigid stem type) [Agency is responsible for submitting all the test reports, getting the drawings and necessary approvals from the concerned departments including consultant charges for preparation of plans and obtaining necessary approvals from CEIG etc., complete. (Makes: Schneider/Kirloskar/ Voltamp/ Esennar/SSE)
-
-
-
... More
For extension of supply to FFC and Admn. Bldg.
1
896401
896401
... More
Construction of DTR plinth of Size 4'x4'x6' (above ground) and 4'x4'x3' (below ground) with brick masonry/RR masonry wall- excavation of pit of size 4’x4’x3’, laying bed concrete with CC(1:4:8) using 40mm and 20mm HBG metal for 6” depth, Construction of distribution transformer plinth with 9” thick 8'6" height brick masonry wall in CM (1:6) allround, filling the hollow portion with and, and plastering all-round the outer side of wall with CM (1:5) 12mm thick and white washing two coats, including cost and Transport of all materials
-
-
-
... More
For Distribution Transformer @FFC
1
39327
39327
... More
Supply and erection of LT 3-Ph 5 Wire Line (Horizontal formation) with 5 x 55 Sq.mm AAAC on 9.5 m Spun poles at 40.0 m Span, 100 Kg/Sq.m wind pressure, working load 350 kg.
-
-
-
... More
For extension of supply to FFC and Admn. Bldg.
0.25
1075781
268945.25
... More
Providing independent earthing with 100 mm dia Heavy gauge C.I (Cast iron) pipe with Flange 2.5 m long enclosed in C.C/brick masonry chamber of 450 mm x 450 mm x 400 mm with R.C.C Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 mm (Width) x 6 mm (Thick) of 200 mm length with all accessories and labour charges etc., complete, as per IS specifications 732/1982 (Part II) for Distribution Transformer.
-
-
-
... More
For Distribution Transformer @FFC
1
10311
10311
... More
Concreting of pole pit of size 2’ x 2’ x 5’ (0.6 m x 0.6 m x 1.5 m) with C.C (1:3:6) using 20 mm and 12 mm HBG metal.
-
-
-
... More
For extension of supply to FFC and Admn. Bldg.
8
7912
63296
... More
Supply, laying, testing and commissioning of 4-pair, Cat 6 Solid (Third party ETL Intertek tested up to 700 MHZ ) to support 1Gbps with Cross (+) filler pair separator & PVC sheath 23 AWG, UTP Cable, Meets or exceeds ANSI/TIA-568-C.2 and UL Listed &RoHS Compliant in the existing raceways /PVC conduits including making connections to information outlets and patch panels with ferruling at both ends for identification with necessary tools for punching stripping crimping and testing required etc., complete. [Makes: Systimax /Panduit/Siemond/Legrand]
100
51
5100
... More
Supply, Installation, Testing and Commissioning of the following Wall mounted Communication rack in one section with glass doors, swing handles, lock, Top and Bottom Cable entries, supports for mounting rack on wall, Cable managers, Fan tray with 2 x 230 Volt fans, Equipment mounting hardware, wire managers, power supply box for supplying power to hubs, fans etc., along with earth continuity kit, MCB, indicator, moulded power supply cable, Blank panels, sliding shelves etc., complete. [Makes: APW/HCL/Valrack/Netrack]
-
-
-
... More
6 U (44 mm ) wall mounted rack
1
9429
9429
... More
Supply, Installation, Testing and Commissioning of Small Business 24 port Gigabit Managed Switch. [Makes: Cisco Model CBS350-28 or equivalent in Juniper/Extreme]
1
34766
34766
... More
Supply, installation, testing and commissioning of the following 4 pair 23 AWG Cat-6 UTP, flexible, double ended patch cords along with 2 nos. of RJ 45 connectors with strain relief boots compatible to T568A,T568B specifications including making connections to information outlets. [Makes: Systimax /Panduit/ Siemond/Legrand]
-
-
-
... More
1 m/3 ft. Patch Cord
10
287
2870
... More
2 m/7 ft. patch cord
6
339
2034
... More
Supply, Installation, Testing and Commissioning of Rack mounted 19", Cat 6 UTP,1.5-1.6 MM CRS chasis, powder coated Modular 24 Ports Patch Panel (upgradable to intelligent panels with use of sensor strips) with collapsible shutters on jacks to support latest amendments of TIA / EIA Cat 6 Specifications in existing Communication Rack along with necessary connections of Cat 6 UTP Cables, With Rear Cable management trays and clamps. [Makes: Systimax /Panduit/ Siemond/ Legrand]
1
8333
8333
... More
FIRE FIGHTING SYSTEM FOR FFC
-
-
-
... More
Supply and fixing of CO2 type Fire Extinguishers 4.5 kg capacity confirming to IS 2878 made from ISI marked steam less cylinder confirming to IS:7285 & CE certified and fitted with ISI marked controlled valve confirming to IS:3224, high pressure 1.0 m discharge hose & horn complete with initial gas charged with carrying handle with wheels and wall mounting bracket. Squeeze lever discharge, used un-used indicator, Aphoxy coated paint (Red) with 93% gloss with 2 years warrant, including transportation, and all labour charges etc., complete. [Makes: Safex/Kenex/ Bharat/Reliance/NewTech/Kartar]
2
12256
24512
... More
Supply and fixing of ABC stored pressure squeeze grip type fire extinguishers, 9 kg capacity, IS:15683 : 2006, filled with ABC Mono Ammonium Phosphate base powder-90 complete with discharge hose and wall mounting bracket, 2 mm Mild Steel, EPDM Rubbers, Pressure Gauge, which work effectively on all class of fires (A, B, C & Electrical fires) with 5 years warranty, including transportation, and all labour charges etc complete. [Makes: Safex/Kenex/Bharat/ Reliance/NewTech/ Kartar]
4
8153
32612
... More
Providing, laying, testing & commissioning of the following classes MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., including transportation, and painting with two coats of red oxide paint and one coat of post office red enamel paint and all labour charges and cost of all accessories etc., complete. [Makes: Jindal/Hissar/Tata]
-
-
-
... More
200 mm dia B class
6
4491
26946
... More
150 mm dia B class
24
3109
74616
... More
100 mm dia B class
224
2072
464128
... More
80 mm dia B class
12
1469
17628
... More
Supply, installation, testing and commissioning of "electric driven main fire pump" suitable for automatic operation and consisting of the following : complete in all respect as required. a) End suction back pull out centrifugal pump, Std. fitted with BRONZE IMPELLER & gland packing, capacity 97 Cum/hr (1620 LPM) at total head 56.0 m at operating speed 2900 rpm. Pump duty as per TAC.
b) 30 kW/40 HP, 3000 rpm, TEFC (IP55) horizontal foot mounted, squirrel cage induction motor, suitable for 415 volts +/- 10%, 3 Ph, 50 Hz +/-5%, A.C supply. Class ‘F’ insulated and suitable for ambient temperature up to 50 deg C. Motor in frame SC 250 M frame for driving above pump.
c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc., as required.
d) Suitable cement concrete foundation duly plastered with anti - vibration pads.
[Pumps: Kirloskar/Mather&Platt/Lubi; Motors: Siemens/ABB/Kirloskar/Lubi]
1
205456
205456
... More
Supply, installation, testing and commissioning of electric driven pressurisation/Jockey pump suitable for automatic operation and consisting of following : complete in all respect as required. a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal and flow of 180 lpm at 56.0 m head conforming to IS 1520.
b) Suitable HP SQ cage induction motor, TEFC type suitable for operation on 415Volts, 3 phase 50 Hz, AC with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.
c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc., as required.
d) Suitable cement concrete foundation duly plastered with anti vibration pads.
[Pumps : Kirloskar/Mather & Platt; Motors : Siemens/ABB/Kirloskar]
1
69912
69912
... More
Supply, installation, Testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of the following complete in all respects as required.
a) End suction back pull out pump, Std. fitted with BRONZE Impeller & gland packing, capable of delivering 97 Cum/hr (1620 LPM) at a total head of 56.0 m when operated at 2150 rpm and pump duty as per TAC.
b) Liquid cooled, 50 BHP at 1800 rpm, Diesel engine (Radiator cooled), 12 Volts starting system with standard accessories. c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required.
d) Suitable cement concrete foundation duly plastered with anti vibration pads.
[Engines : Kirloskar/Cummins; Pumps : Kirloskar/Mather&Platt]
1
496518
496518
... More
Fabrication, supply, transportation, installation, testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2 mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete with following incoming and Outgoings, suitable for operation on 415V, 3 phase, 50 Hz AC Supply.
[MCCBs: L&T- D shine/Schneider-NS NSX/Legrand -DP X3/Siemens-3VL/Hager-h3/C&S -Winbreak2]
[Meters : Schneider (Conzerve)/L&T/Elmeasure/Siemens]
1
303106
303106
... More
INCOMING :
250 A, 50 kA, 4 Pole MCCB, Ics=100% Icu rating.
Digital Voltmeter (0-500V) with selector switch.
Digital Ammeter (0-250 A) with selector switch & CTs etc.,
LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps
Set of Copper Bus Bar 300 A
OUTGOING :
(Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)
MAIN FIRE PUMP :
125 A, 50 kA, TPN MCCB, Ics = 100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation selector switch for local/remote, auto/manual/OFF operation.
-
-
-
... More
JOCKEY PUMP
63 A, 50 kA TPN MCCB, Ics=100% Icu, with suitable protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.
DIESEL ENGINE CONTROL :
Control for diesel engine comprising - Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/Low Lub. Oil pressure, High Water Temp and Engine on indication Water Temp and Engine on indication. Battery charger suitable for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC Voltmeter, and 0 - 20 A DC Ammeter. All standard relays and accessories for automatic operation of diesel engine System Controller.
-
-
-
... More
Supply and fixing of single headed Internal/External hydrant valve with instantaneous Gun metal couplings of 63 mm dia with Cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gun Metal cap and chain as required. [Makes: Newage/Winco/Safex/Minimax/ Honeywell]
6
10797
64782
... More
Supply, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze/Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required. [Makes: Audco/Kirloskar/Leader/Zolotto/ Honeywell]
-
-
-
... More
200 mm dia
2
7248
14496
... More
150 mm dia
4
6064
24256
... More
100 mm dia
2
4659
9318
... More
80 mm dia
2
4289
8578
... More
Providing, installation, testing and commissioning of the following sizes dual Plate non - return valve confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc., as required. [Makes: Leader/Zolotto/ Honeywell]
-
-
-
... More
200 mm dia
2
13608
27216
... More
150 mm dia
2
9762
19524
... More
Supply and fixing of 63 mm dia, 15 m long RRL hose pipe with 63 mm dia Male and Female SS Couplings duly binded with GI wire, rivets etc., conforming to IS 636 (Type-A) as required. [Makes: Newage/Winco/Safex/Minimax/ Honeywell]
12
6212
74544
... More
Supply and fixing 4 Way fire brigade connection of cast iron body with 4 nos. Gun metal Male instantaneous inlet couplings complete with cap and chain as required for 150mm dia MS pipe connection, conforming to IS 904 as required. [Makes: Newage/Winco/Padmini/Safex/ Minimax/Honeywell]
2
11832
23664
... More
Supply, installation, testing and commissioning of 150 mm dia Stainless Steel Y – Stainer fabricated out of 1.6 mm thick SS 304 conforming to IS specifications complete with rubber gasket, GI bolts, nuts, washers etc., as required [Makes: Leader/Zolotto/Honeywell]
3
11832
35496
... More
Supply and fixing of hose cabinet of size 750 mm X 600 mm x 250 mm made of No 16 gauge SWG CRCA sheet with 6mm thick glazed glass door including necessary locking arrangement suitable to accommodate 2 Nos. 15 m long Hose pipe, 1 No. branch pipe, mounted on wall OR raised brick platform and duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant as required. [Makes: Minimax/Safex/Newage/Winco]
6
4289
25734
... More
Supply and fixing of 63 mm dia Gun metal branch pipe with 20 mm (Nominal internal diameter) size Gun metal nozzle conforming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required. [Makes: Newage/Winco/ Safex/Minimax]
6
3254
19524
... More
Providing and fixing of Pressure Switch in the MS pipe Line including connection etc., as required. [Makes : Danfoss/ Indfoss/System Sensor/Honeywell]
3
3235
9705
... More
Supply, installation, testing and commissioning of Bourden type, stainless steel dial type pressure gauge with isolation valve and pipe having calibration of 0-16 kg/Sq.cm [MAKES: HGURU/FIEBIG]
3
862
2586
... More
Supply, installation, testing and commissioning of 25 mm dia Gate valve [Makes : Zoloto/Leader/SANT/NEU-G]
3
1553
4659
... More
Supply, installation, testing and commissioning of 25 mm dia Ball valve [Makes: Zoloto/Leader/SANT/NEU-G]
3
858
2574
... More
Providing, fixing, testing & commissioning, installation of 150 mm dia control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc., as required. [Makes : HD/TYCO/NEWAGE]
1
59162
59162
... More
Supply, installing, testing and commissioning of 150 mm nominal dia CI body Foot Valve with brass strainer with necessary flanges, nuts and bolts etc., complete on to the suction line. [Makes: Normex/SANT]
1
17749
17749
... More
Supplying and wrapping the anticorrosive material for buried pipes with coating of primer and wrapping with 4 mm thick polymer corrosion resistant tape as per IS : 10221 with 15 mm overlap as per specification. [Make: IWL (PIPE KOT) or its equivalent]
-
-
-
... More
200 mm dia
6
592
3552
... More
150 mm dia
20
444
8880
... More
100 mm dia
20
400
8000
... More
80 mm dia
6
341
2046
... More
Supply, fabricating, installing structural steel supports for fixing all sizes of MS pipes from ceiling /wall with MS Channels, Angles, Flats, Rods, as required at site with anchor fasteners, Clamps, threaded rods, nuts, bolts,washers etc., complete with painting including labour charges etc complete for finished item of the work as directed by Engineer-in-Charge.
500
141
70500
... More
Supply of 4 nos. of round bottom G.I sheet buckets of 9 Ltrs. capacity as per IS:2546 made out of 24- Gauge GI sheet with extra handle at bottom duly painted inside and red outside with printed with FIRE Mark for stand and hook and filled with sand and arranged to existing stand or hook.
3
1486
4458
... More
Providing floor mounting stand for keeping 4 Nos. of fire buckets 1500mm length, 900 mm height made out of 40x40x6mm angle iron welded with 4 hooks and duly painted with one coat of red lead and two coats of enamel paint.
3
1512
4536
... More
Supply and fixing of PVC synthetic elastomer electrically insulated mat conforming to IS: 15652-2006 with Class B insulation having 2.5 mm thickness upto 11 kV
2
5361
10722
... More
Supply & Delivery of 11 kV/22 kV hand gloves.
2
294
588
... More
Supply & fixing of 18" x 12" x 8" size First Aid box.
2
1582
3164
... More
Supply and fixing of Escape signage board in Rigid Photo luminecent based glow in Dark rigid sheet with high intensity luminous properties with specificaiton. [Makes: Cease Fire or its equivalent make Model-1ES01]
5
1931
9655
... More
Providing and fixing Flow Switches in 150 mm dia MS pipe. [Makes : System Sensor/Switzer/Honeywell]
2
9630
19260
... More
Providing and fixing Flow Switches in 100 mm dia MS pipe. [Makes : System Sensor/Switzer/Honeywell]
2
6899
13798
... More
No. of BOQ items: 175(One hundred Seventy Five One) only
-
-
62577258.79
... More
(Rupees Six Crores Twenty Five lakhs Seventy Seven thousand Two hundred Fifty Nine Only)
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements