Andhra Pradesh Industrial Infrastructure Corporation Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Andhra Pradesh Industrial Infrastructure Corporation - APIIC Tender
Civil And Construction
Building Construction
Opening Date24 Jan 2025
Closing Date30 Jan 2025
Tender Amount₹ 5,27,81,025
Costs
EMD
₹ 5,28,000Document Cost
Refer DocumentsTender Fee
₹ 2,360
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
781574Tender No
18/CE(N)/APIIC/2024-25, Dated: 23.01.2025Tender Authority
Andhra Pradesh Industrial Infrastructure Corporation ViewPurchaser Address
-Website
http://https://www.apiic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Basement - 2 :
1000
240
240130
... More
Basement - 1 :
1000
240
240130
... More
Supply & application of one coat water based cement primer of exterior grade II and two coats of synthetic polymer luxury plastic emulsion paint of superior grade having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.
-
-
-
... More
Over all building
8000
354
2834160
... More
Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1993 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall top coat including overheads and contractor profit etc., complete for finished item of work
-
-
-
... More
Fourth Floor :
80
1295
103600
... More
Fifth Floor :
80
1295
103600
... More
Sixth Floor :
80
1295
103600
... More
Seventh Floor :
80
1295
103600
... More
Providing & fixing Armstrong or approved equivalant suspended false ceiling system with Silhouette profile main runner spaced at 1200mm centres securely fixed to the structural socket by approved hanger at 1200mm maximum centre. The last hanger at the end of each main runner should not be greater than 450mm from the adjacent wall a)1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module Cut cross lees longer than 500mm require independent support 600 x 800mm module to be formed by fitting 600mm long cross tees centrally between the 1200 mm cross tees The 1200mm cross tees to have central "birdsmouth' notches to facilitate fitting of 600mm cross tees. b) Perimeter trim to be wall angles or channel, secured to walls at 450 mm maximum centres. c) Providing & Fixing of Armstrong or approved equivalant Acoustical Suspended Ceiling Systern with Elite Tiles having Microlook edge. The tiles should have Humidity Resistance of 99% RH, Average NRC 50, Light Reflectance 80%, Thermal Conductivity = 0.052-0.057 w/m k, Colour White, Fire Performance Class 0/Class 1 (BS-476) with life time warrantee against sag in module size of 600mm x 600mm x 18mm laid on Silhouette Hot Dipped Galvanised steel suspension System having rotary stitching on the Main Runner, 1200 mm & 600 mm Cross Tees
-
-
-
... More
Fourth Floor :
40
1600
64000
... More
Fifth Floor :
40
1600
64000
... More
Sixth Floor :
40
1600
64000
... More
Seventh Floor :
40
1600
64000
... More
Providing & Fixing of Armstrong Orcal Lay in metal ceiling System consisting of 600x600mm Lay in tiles of pre coated galvanised steel in 0.5 mm thickness in white colour to be laid on Armstrong grid systems with 15mm wide T- section flanges colour white having rotary stitching on the Main Runner, 1200 mm & 600 mm Cross Tees To comprise main runner spaced at 1200mm centres securely fixed to the structural socket by approved hanger at 1200mm maximum centre. The last hanger at the end of each main runner should not be greater than 450mm from the adjacent wall Flush filting 1200mm long cross tees to be Interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be Armstrong wall angles or channel, secured to walls at 450 mm maximum centres.
-
-
-
... More
Fourth Floor :
40
2400
96000
... More
Fifth Floor :
40
2400
96000
... More
Sixth Floor :
40
2400
96000
... More
Seventh Floor :
40
2400
96000
... More
Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI marked flush door shutters of 30 mm thick double shutters with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides, fixing 1mm thick mat finish laminated sheet to full width and height of the flush shutter both sides including cost and conveyance to site of teak wood frame, flush shutter, laminate sheet including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Alumium fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1200mm x 2100mm)
-
-
-
... More
Fourth Floor :
1
6076
6076
... More
Sixth Floor :
1
6076
6076
... More
Seventh Floor :
2
6076
12152
... More
Sanitary fixtures @ Tower-A
-
-
-
... More
SANITARY FIXTURES
-
-
-
... More
Supply, Installation and commissioning approved make floor mounted close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approvedmake with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects: Special Colour - Grade - III including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work.
7
19307
135154.11
... More
Supplying & Fixing Indian makeFlat Back Wash Hand Basin jaquar/Equavalent make 1st quality conforming to IS:2556-Part-4:1972 of 560x430x185mm ,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty 31.75mm dia PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.
7
3402
23819.39
... More
Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 590 x 375 x 390 mm of Ist quality including cost and conveyance of all materials, overheads and contractor's profit etc. complete for finished item of work in all respects.
40
3569
142785.2
... More
Supply & fixing of Jaquar make Sensotronic concealed type flushing valve for urinal complete set with installation box with control cock, Chrome plated with 7 years warranty.
40
15777
631108.8
... More
Supplying & fixing CI floor traps 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practicefor nominal dia 75 mm (3") and grating size 100 mm dia of weight not less than 4.0 Kgs including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.
100
363
36357
... More
supply and fixing of 8mm thick thougned galss partions of size 4'0''x 2'0'' with etching the glass including fixing at site for urinals including full rounding the edges fixing in poisition,including cost and conveyance of all materials and labour charges,overheads and contractors profit complete for finished item of work for all floors
40
2540
101630.8
... More
Supply and installation of Besco by Merino/Grun Lam series cubicies of width and depth as per specications/ aite drawings. Cubide height to be 1980 mm. Made from solid grade compact high prosaurs laminate as per IS:2046 manufactured under high specific pressure 5 MPa and temperature 1200C with bunch of kraft papers impregnated with thermosetting phenolic resin and decorative papara made of Alpha cellulose liber impregnated with thermosetting melamine resin which provide superior scratch, abrasion, heat, chemical, impact, graffili & moisture resistance along with anti-bacterial properties. Paneis have a black core that when machined, presents a distinctive black edge. Panci thickness 12 mm. Design no, as specified by Arch. / Engr. in sueda finish. Size of panels lo be as per drawing. Rectangular head frame structure made from Stainless steal grade 304.Surface finish to be brush type. A thin plastic film pasted for surface protection. Size to be 55mmx42mmx1.6 mmT. Corner joinery section made from Stainloss steel grada 304. Surface finish to be brush type. A thin plestic film pasted for surface protection.Size to be 35mmx 15mmx0.8 mmT. Wall joinery section with hamming profile made from Stainless steel grade 304. Surface finish la be brush type. A thin plastic film pasted for surface protection. Size to be 21mmx10mmx0.8 mm. • Adjustable Palm Design Pedestal Footing of base diameter 64 mm made from Stainless steel grade 316 giving a clearance height of 150 mm. Surface finish to be matt type.• Spring loaded Butt Hinges made from Stainless steel grade 304. Surface finish to be matt type. Covers lo be lacor coated.• Conical shape Coal hook with rubber stopper made from Stainless steel grade 304. Surface finish to be matti type.• Round Door knob diameter 30 mm with grooves for better hand grip made from Staintess steel grade 304. Surface finish to be matt type. Rotating Thumb turn locking system with privacy indicator made from Stainiess sical grade 304. Surface finish to de matt type." Anti-noise rubber padding of thicknoss 2 mm and with 10 mmo Stainlese steel grade 304 screws.• Anti-rotation Nylon polyamide grade-8 axpandable wall plugs including cost and conveyance of all materials and labour charges,overheads and contractors profit complete for finished item of work for all floors
40
35000
1400000
... More
Modification of Joint works at Floor, Wall & Drive Ways
-
-
-
... More
Providing and fixing of expansion joint system related with floor locationas per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical localtion in load application areas that accommodates multi directional seismic movement without stress to it’s components. System shall consist of metal profiles with an universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed
of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self- centering arrangement that freely rotates / moves in all directions. The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions
including vertical displacement. Provision of Moisture Barrier Membranein the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in-Charge. Note : Application: Floor-to-Floor, Joint Size: 75mm, Exposed Metal: Aluminum,Finish: Mill, Movement: +/- 50%, Movement Performance test as per ASTM E 1399,
-
-
-
... More
100 mm joint size
800
6392
5114040
... More
150 mm joint size
300
7812
2343705
... More
200 mm joint size
300
9903
2971095
... More
Providing and fixing of expansion joint system related with wall joint (internal/external) location as per drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members, selfaligning / centering arrangement and support plates as per ASTM B221-02. The material shall be such that it provides an Expansion Joints Systemsuitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate
movement.
-
-
-
... More
100 mm joint size
400
5305
2122260
... More
150 mm joint size
400
5981
2392560
... More
200 mm joint size
400
6889
2755620
... More
Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates as per ASTM B221-02. The system shall be such that it provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates an universal aluminum base member designed to
accommodate various project conditions and roof treatments. The
cover plate shall be designed of width and thickness required to satisfymovement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement
-
-
-
... More
100 mm joint size
400
5985
2394280
... More
150 mm joint size
300
6699
2009955
... More
200 mm joint size
300
7927
2378280
... More
Electrical Works
-
-
-
... More
INTERNAL ELECTRICAL WORKS
-
-
-
... More
Supply and laying of the following P.V.C. pipe (ISI Mark) in cable trays/false ceiling with all accessories including cost, conveyance and labour charges etc., complete. [Makes: Sudhakar/Precision/Polycab]
-
-
-
... More
25 mm outer dia -1.80 mm thick- Medium grade
6000
92
552000
... More
32 mm outer dia -2.10 mm thick- Medium grade
200
119
23800
... More
Wiring with 3 runs of 14/0.3mm (1.5 Sq.mm) P.V.C. insulated F.R.L.S flexible copper wires (ISI MARK) of 1100 V grade as per IS: 694/1990 & IS:17048/2018 as phase, neutral and earth in existing pipe with 6A/10A-1 Way-1 Module Modular Switch, 3 Plate Jumbo ceiling rose, and 8 Modular Horizontal/Vertical Cover plate (frame) covering to 8/9 module Hot dip Galvanized 18 SWG GI Module Switch Control box with earthing terminal, including cost, conveyance and labour charges etc., complete for light, and exhaust fan points in non residential buildings. [Cable makes: Finolex/Havells/ Polycab; Switches and Frame makes: Legrand (Myrius/ Lyncus)/Schneider(Clipsal X /Livia AB)/Crabtree (Murano/Athena)/Goldmedal(GIFA)]
20
1067
21340
... More
Wiring for Fan point control by one switch with three runs of 1.5Sqmm FRLS-H/HFFR PVC insulated 1100V grade flexible copper cable as Phase, neutral and earth in the existing PVC conduit pipe with 6A Modular type switch, 2M electronic step type regulator, modular front plate, suitable GI box, ceiling rose, fan hook etc., including all labour charges etc complete. [Cable Makes: Polycab/ Havells/ Finolex, Switches makes: Legrand(Myrius)/ Schneider(Clipsal X)/ Crabtree (Murano)/ Goldmedal(GIFA)]
2
1778
3556
... More
Supply and fixing of 3 Nos. 6A/10 A - 3 Pin, 2 Module, Modular Socket with Shutter and 2 Nos. 6A/10A, 1 Way, 1 Module, Modular Switches mounted on 8/9 module Hot Dip galvanized 18 SWG Module metal box with earthing terminal and covered with an appropriate modular cover plate with metal frame in recess, including cost, conveyance and labour charges etc., complete. [Makes: Legrand (Myrius/ Lyncus) /Schneider(Clipsal X/Livia AB)/ Crabtree (Murano/Athena)/Goldmedal (GIFA)]
6
1371
8226
... More
Supply and fixing of 16A/6A, 1 way, Combi Modular Socket with shutter and 16A modular switch mounted on 3 module Hot Dip galvanized 18 SWG Module metal box for Switch Board with earthing terminal and covered with an appropriate modular cover plate with metal frame in recess, including cost, conveyance and labour charges etc., complete. [Makes: Legrand (Myrius/Lyncus)/ Schneider(Clipsal X/Livia AB)/ Crabtree (Murano/Athena)/Goldmedal(GIFA)]
6
813
4878
... More
Supply and laying of following FRLS PVC insulated flexible copper wire (Phase, Neutral) with 1 run of suitable FRLS PVC insulated flexible copper wire as earthing in existing PVC conduit pipe for run of circuits including labour charges etc., complete [Makes: Finolex / Polycab /Havells]
-
-
-
... More
2 Runs of 4 Sq.mm (P, N) and 1 Run of 2.5 Sq.mm (E) copper cables with Colour Coding
500
175
87500
... More
4 Runs of 6.0 Sq.mm (R, Y, B and N) and 1 Run of 4.0 Sq.mm (E) copper cables with Colour Coding
400
447
178800
... More
Supply, Installation, testing and Commissioning of following DBs with IP43 Protection as per IS 8623; IS 13032; IEC 61439-3 including internal connections and labour charges etc complete. [DB Makes: Legrand(Ekinox 3) /Schneider-A9/ Lauritz Knudsen (Formerly L&T)-Newrange, MCB Makes: Legrand-DX3 / Schneider-A9/ Lauritz Knudsen (Formerly L&T)-AU]
-
-
-
... More
12-way SPN Horizontal DB 8Nos of 6-32A SP MCBs as out goings and 1No 40-63A 4-Pole MCB as Incommer.
2
8297
16594
... More
Supply and fixing of 18-20W not less than 1100 mm length LED batten light with extruded Aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having system efficacy 120 lumens/watt, PF 0.9, Surge protection: 2 kV, THD 15%, with inbuilt driver and frosted cover CCT: 5700 K, minimum CRI 70 etc., complete on wall/ceiling with Teak Wook/PVC round blocks with all accessories, giving connections as required with 23/0060 twin core twisted/flat heavy Copper wire, earth connection including cost, conveyance, labour charges and warrenty not less than two years. [a) Luminaire makes : Philips (Signify)/Crompton/Wipro; LED makes: Philips lumileds/Cree/Nichia/Osram]
100
749
74900
... More
Supply, installation, testing and commissioning of 48" (1200 mm) Sweep Ceiling Fan with double ball bearings, air delivery more than 200 cubic meter/min etc., including cost, conveyance and labour charges for giving connections with 23/0060 Twin Core Twisted wire/flat heavy Copper wire etc., complete. [Makes: Crompton (HS Plus/HS)/Havells (ES PLUS/SS390ES) /Orient Energy Star/Halonix(Zephyr)]
2
2919
5838
... More
Supply, transporatation & installation of following sizes of Hot Dipped Galvanized Iron perforated ISI mark cable trays without cover, including horizontal and vertical bends, reducers tees, cross members and other accessories as required and duly suspended from the ceiling/Wall with suspenders etc., complete.
-
-
-
... More
150mm x 50mm x 1.6mm thick GI perforated cable tray without cover
600
492
295200
... More
300mm x 50mm x 1.6mm thick GI perforated cable tray without cover
300
908
272400
... More
Supply installation Testing and commissioning of 20 KVA, 312/360 V DC on line UPS system as per IEC 62040-I (Safety), IEC 62040-3 (Performance) for critical IT solutions, fully digital IGBT Converter and Inverter, SCR rectifier with Internal /External isolation transformer from DC to AC, PWM, pure sine wave output, double conversion, output pf 0.8, with paralleling facility, standard communication features/options auto and manual static by pass switch three phase input / Three phase output. acoustic level shall be less than 58dB at 1 mtr distance
[Makes:- Numeric/APC/Fuji Electric /Emerson]
1
372373
372373
... More
Supply and providing of battery rack upto 11 to 20 batteries (42 AH)
1
6249
6249
... More
Supply and fixing of 12V 42 AH SMF battery with 3 years warranty including wire leads, connections etc complete. Makes: Quanta / Racket / Exide.
24
7124
170976
... More
Supply installation testing and commissioning of BMS Software including of client software required with complete monitoring applications, graphics screens and to generate all management information systems (MIS) reports It shall be shown in ethernet / TCP IP by at least 1 user licenses. Scope of Work
1.HT PANELS : • Integration of incoming and outgoing breakers, Monitoring the circuit breakers (ON/OFF/Trip) and alarm notifications of faults in BMS and HT panel 2. Transformers
• Integration of 2 x 2000 kVA transformers and 1x 3000kVA transformers & LT kisok, monitoring the load, voltage levels and alerts the overload and fault conditions.
3. DG Sets
• Integration of 4 x 1500 kVA DG sets and 1 x 500 kVA DG set and DG panel.
• Monitoring the fuel level, runtime, and operational status.
• Monitoring the Load sharing of each DG set (individual or synchronizing time)
• Monitoring the operation of Auto/manual start/stop functions and alarm notification of DG Sets Integration with Each Floor existing Multifunction Meter, common area and Chiller Plant.
2.Communication cable laying from each panel to BMS Panel.
3.Supply of BMS Panel with controllers.
4.If required MFM meters supply max: - 6Nos.
5.BMS Software and installation And PC with monitor supply.
PC Configuration: -
1.I7-14 Generation processor
2.SSD-1TB
3.Ram – 16Gb
4.Monitor – 32”
5.Keyboard, Mouse
1
1988000
1988000
... More
4. LT Panels
• Integration of Main LT Panel, DG panel, Lift panel, HVAC main panel, Lighting panel, Floor wise panel and APFC panel
• Monitoring of Load distribution, energy consumption, and fault detection of all panels.
• Monitoring the alarm of the all Circuit breaker in LT Panel, DG panel, Lift panel, HVAC main panel, Lighting panel, Floor wise panel and APFC panel.
• Each panel should have unique ID • Daily Monitoring: Log the kWh consumption from each panel for both EB and DG sources separately.
• Unaccounted Losses: Compare the total energy supplied by EB and DG with the sum of energy consumed by all panels.
• Monthly Summarization: Aggregate daily data to get month-wise consumption values.
• Store daily and monthly data in a BMS database for up to 1 year or more.
• Set alerts for abnormal consumption or losses exceeding
5. Lifts • Integration of 9 passenger’s lifts and 2 goods lift.
• Energy consumption tracking and fault diagnostics and emergency alarms.
-
-
-
... More
6. HVAC Systems
• Integration of 3 x 600 TR water-cooled chillers • Monitoring of Cooling performance, water inlet/outlet temperatures.
• Monitoring of operational status and Fault’s.
• Monitoring the operation of Condenser pumps, Primary pumps & Secondary pumps and cooling tower’s.
• Monitoring of Air handling unit and calculate the kWh consumption from each AHU
7. Firefighting System
• Monitoring of all fire pumps( 15 HP booster pump, 2 x 80 HP electric-driven main fire pumps , 1x 100 HP diesel engine-driven main fire pump, 2 x 15 HP electric-driven jockey pump)
• Monitoring Pump operation status and fault alarms and Pressure levels in sprinkler lines.
8. Fire Alarm System
• Integration of fire alarm panels and Monitoring of Detectors (above and below false ceilings), Hooters and manual call points across common areas and lift lobbies (ground to 7th floors).
• Identify the Zone-wise alarm and fault notifications.
-
-
-
... More
9. CCTV and PA System
• Integration of CCTV cameras across all floors and basements into the IBMS for centralized monitoring.
• Integration of the PA system for announcements and emergency communication.
NOTE:- Training for management staff on System operation in BMS, troubleshooting and maintenance shall be under the scope of Agency.
-
-
-
... More
Scope of Supply: -
a. Remote I/O cards and Control accessories For
HVAC panel, Firefighting panel, Fire alarm system
Lift panels, Transformer Incoming panels to
Monitor the status.
b. Separate Remote I/O card with panels will be
supplied, if not possible to integrate inside the main
panel.
c. LT (Level Transmitters) from Main HSD Diesel tank
level monitoring with Atex approved (Ex. Certified).
d. Centralized PLC panel including I/O Cards.
e. Control cabling from each panel to centralized PLC
panel
f. Cabling from LT (Level Transmitters) to PLC panel.
PC with Scada Software for Power Monitoring:
a. PC with Windows 11, Scada Software with
SQL Database.
b. I7 with 11 generation processor.
16 gb ram, 1 TB SSD Rom.
32” monitor.
-
-
-
... More
Supply, installation testing and commissioning of 100 mm dia BTU meter for following flow. The BTU meter should have a built in minimum 8 digit LCD display for display of parameters, values and faults. The meter should be compatible with the BMS system. The minimum functions to be provided by the BTU meter is as under • M Bus Software to be included. • Calculation and storage of maximum values • Minimum One month Storage of billing data. • Measurement of tariff dependent data. • Storage of 13 monthly cumulative energy/volume values in EEPROM. • Detection of faults. • Display of values , parameters and faults. • Selectable scope of display • Test and service functions. The BTU meter should have a minimum sampling time for flow every 3 seconds and temperature 24 seconds. Possible displays to be indicated are KWH, MWH, GJ, MJ, KW, m3, m3/hr ,h and Deg C. The BTU meter should have a minimum accuracy of class 2 with CE conformance. accuracy of class 2 with CE conformance, with all required controls.The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. [Makes: Engelmann/Honey Well/Danfoss/Onicon]
21
163403
3431463
... More
PUBLIC ADDRESS SYSTEM :
-
-
-
... More
Supply and Fixing of Ceiling mount Speakers with 6W impedance with power taps of 1.5W/3W/6W etc., complete.
Make: Ahuja/Mega/Studio Master/ Bosch
200
3667
733400
... More
Supply, Installation, Testing and Commissioning of speakers with following specifications:12W Wall mount box Speaker, rated power: 12W, Tapings 100 volt line : 12/6/9WTransformer Impedence, Ohms , 100V : 1.67k/3.33k/6.66k, Frequency Response : 55-15,000 HzSPL at 1kHz (1W/1M) : min 85dB, Color /Finish : White RAL9016 / Black.
Make: Bosch/Honeywell
15
1977
29655
... More
Supplying, installing, testing and commissioning of 25 zone selector P.A. console and with CRCA sheet housing and control desk aslo included with rack arrangement as required. Console shall have all call / call back type complete with battery back up and it should also work on AC single phase power. (considered each floor one Zone).
Makes - Bosch/Honeywell
1
30710
30710
... More
Supply, and drawing of 2 x 1.0 Sq. mm TWIN PARALLEL SPEAKER CABLE conforming to IS 8130/84, IS 694/IS 5831 etc., with latest upto date amendments in existing surface/recessed conduits including cost, conveyance, making connections and interconnections as required. [Makes : Polycab/RR Kabel/Finolex/Havells]
6000
36
216000
... More
Supply installation testing and commissioning of amplifier with inbuilt 1000 watts amplifier with emergency microphone along with all interconnections suitable to integrate with fire alarm panel. [Makes : Honeywell/Bosch/Philips or equivalent]
2
30000
60000
... More
Supply and Fixing of wireless hand held microphone Having Frequency Response of 40Hz-13kHz etc., complete.
Makes : As per list of recommended brands.
2
5283
10566
... More
Surveillance System:
-
-
-
... More
Supply, Installation, Testing and Commissioning of 4MP or higher IR Dome, fixed lens min 2.8mm DC Iris, 1/2.7" progressive CMOS image sensor, Min. Illumination 0.005 (color), S/N Ratio: 50dB, Electronics Shutter: 1/5 ~ 1/10000, IR Distance: 30M, with built in video analytics ,WDR~120dB/BLC/HLC/3D DNR, Gain Control: 0 ~100%; SD card up to 256GB, Video Compression: H.265 /H.264/MJPEG, Smart Codec; Triple Stream; Protocals: H.265 /H.264/MJPEG, Smart Codec; ONVIF: S/G/T; Op. Temp: -30 to 60 Deg; power consumption max. 6W; IP67,IK10,BIS Compliance. [Makes: D-Link/CP-Plus/Matrix]
30
7953
238590
... More
Supply, Installation, Testing and Commissioning of 4MP or higher IR Bullet, fixed lens min 2.8mm DC Iris, 1/2.7" progressive CMOS image sensor, Min. Illumination 0.005 (color), S/N Ratio: 50dB, Electronics Shutter: 1/5 ~ 1/10000, IR Distance: 30M, with built in video analytics ,WDR~120dB/BLC/HLC/3D DNR, Gain Control: 0 ~100%; SD card up to 256GB, Video Compression: H.265 /H.264/MJPEG, Smart Codec; Triple Stream; Protocals: H.265 /H.264/MJPEG, Smart Codec; ONVIF: S/G/T; Op. Temp: -30 to 60 Deg; power consumption max. 6W; IP67,IK10,BIS Compliance., Required accessories mounts to be considered. [Makes: D-Link/CP-Plus/Matrix]
36
8180
294480
... More
Supply, installation, Testing and Commissioning of IP IR 2MP PTZ Camera- 32x Network PTZ Dome Camera Max. 2megapixel (1920 x 1080) resolution, 4.44 ~ 142.6mm (Optical 32x) lens, Max. IR viewable length : 200m (656ft), Day & Night (ICR), WDR (150dB), DIS (Built-in gyro sensor), 1/2.8’’ Progressive Scan CMOS, Intelligent Video / Audio Analytics, Intrusion Detection and Motion Detection, Shock detection, Azimuth display (Cardinal & intermediate directions),Multiple streaming, Wise Stream II support H.265, H.264, MJPEG codec support MicroSD / SDHC / SDXC memory 2 slots (Up to 512 GB) IP66, IK10 UL Certified PTZ Camera along with pole/wall mount L-bracket for Mounting, Power Adapter, IP66, TVS 4,000V Lightning Protection, Surge Protection and Voltage Transient Protection etc. [Makes: D-Link/CP-Plus/Matrix]
7
107253
750771
... More
Supply, Installation, Testing and Commissioning of 32CH Embedded 4K NVR 4SATA expandable up to 40TB, audio input & Output, Two way communication supported, G7.11 audio output support, 320Mb recording throughput, Op. temp -10 to 50 deg. C, NDAA compliant, UL/CE/FCC/BIS certified. [Makes: D-Link/CP-Plus/Matrix]
2
60330
120660
... More
Supply, Installation, Testing and Commissioning of 16CH Embedded 4K NVR 2SATA expandable up to 20TB, audio input & Output, Audio out putcommunication supported, G7.11 audio format support, 128Mb recording throughput, HDMI, VGA ports to be supported with maximum 16 users, Op. temp -10 to 50 deg. C, UL/CE/FCC/BIS certified. [Makes: D-Link/CP-Plus/Matrix]
1
17219
17219
... More
Supply and fixing of Surveillance HDD-4 TB [Make: Seagate/Hitachi/TOSHIBA/ED]
8
23314
186512
... More
Supply, Installation, Testing and Commissioning of Layer2, 24GE port POE 10/100 /1000 + 4 1/10G SFP Uplink Ports, LAN base Manageable Network switch. [Makes: D-Link-DGS-1510-28P/Digisol DG-GS4628HPE-XS]
1
54921
54921
... More
Supply, laying, testing & commisioning of 4-pair, Cat-6 Solid (Third party ETL Intertek tested 600 MHZ above) to support 1Gbps with Cross (+) filler pair seperator & PVC sheath 23 AWG, UTP Cable, Meets or exceeds ANSI/TIA- 568-C.2 and UL Listed & RoHS Compliant in the existing raceways / PVC conduits including making connections to information outlets and patch panels with ferruling at both ends for identifiation with necessary tools for punching, stripping, crimping and testing required etc complete. [Make: Systimax /Panduit/ Siemond/ Legrand]
6000
51
306000
... More
Supply, installation, testing & commisioning of 1No. of Cat-6 Tooless builtin crimping mechanism Information Outlet with Dust Cover Exceed ANSI/TIA-568-C.2 and ISO/IEC 11801 standards with 1-module face plate for Category 6 component performance & Compatible to T568A,T568B wiring pattern and UL-940V0 Rated Plastic & RoHS Compliant. [Make: Systimax /Panduit/ Siemond/ Legrand]
10
591
5910
... More
Supply, installation, testing & commisioning of 2Nos of Cat-6 Tooless builtin crimping mechanism Information Outlet with Dust Cover Exceed ANSI/TIA- 568-C.2 and ISO/IEC 11801 standards with 2-module face plate for Category 6 component performance & Compatible to T568A, T568B wiring pattern and UL- 940V0 Rated Plastic & RoHS Compliant. [Make: Systimax /Panduit/ Siemond/ Legrand]
4
1193
4772
... More
Supply, installation, testing & commisioning of 4 pair 23AWG Cat-6 UTP, flexible, double ended patch cords along with 2Nos. of RJ-45 connectors with strain relief boots Compatible to T568A, T568B specifications including making connections to information outlets. [Make: Systimax /Panduit/ Siemond/ Legrand]
-
-
-
... More
1mtr / 3 ft Patch Cord
50
287
14350
... More
2mtr / 7ft patch cord
10
339
3390
... More
3 mtr / 10ft Patch cord
5
390
1950
... More
Supply, Installation, Testing and Comissioning of Rack mounted 19", Cat 6 UTP,1.5-1.6 MM CRS chasis, powder coated Modular Patch Panels 24 Port (upgradable to intelligent panels with use of sensor strips) with collapsible shutters on jacks to support latest ammendments of TIA / EIA Cat 6 Specifications in Existing Communication Rack along with necessory connections of Cat 6 UTP Cables, With Rear Cable management trays and clamps.[Make: Systimax /Panduit/ Siemond/ Legrand]
4
8915
35660
... More
Supply, Installation, Testing and Comissioning of following size Communication rack in two sections viz rear Steel Door and hinged front section with glass doors, swing handles, lock on both doors, Top and Bottom Cable entries with gland plates, Castor with brakes, 7Nos Cable managers, 1No. Fan tray with 2 x 230V fans, Equipment mounting hardware, wire managers, power supply box for supplying power to hubs, fans etc along with earth continuity kit, MCB, indicator, moulded power supply cable, Blank panels of 1u / 2 u , sliding shelves. Frame of communication rack should be made of heavy grade Aluminum profile PS grey painted and panels should be made from CRCA steel 18 swg RS Beige painted. [Make: APW/ HCL/ Valrack/ Netrack]
-
-
-
... More
42 U (44 mm )Floor Standing Rack 800WX1000D
1
69271
69271
... More
22 U (44 mm) Floor Standing Rack
2
40889
81778
... More
15 U(44 mm ) wall mounted
3
12484
37452
... More
Supply & Fixing of small business 24 port Gigabit POE Managed Switch. [Make: D-Link-DGS-1210-28P/Digisol DG-GS1528HP/C]
4
30676
122704
... More
Supply and installation of 4K UHD, 55” LED Display complete with following Specifications:
a) Diagonal Size 55"
b) Type Edge LED BLU.
c) Resolution 3840*2160 (4K UHD) d) Pixel Pitch(mm)0.105 x 0.315.
e) Active Display Area(mm)1209.6(H) x 680.4(V)
f) Brightness (Typ.) 350 nit.
g) Contrast Ratio 4000:1.
[Makes: Samsung QB55R or its equivalent make in Dell / LG / Samsung / Lenovo / HP]
3
30676
92028
... More
HVAC
-
-
-
... More
Supply, installation, testing and commissioning of FRP Plutruded induced draft Counter flow Cooling Tower of 650TR capacity complete with FRP water basin, PVC fillings, statically and dynamically balanced fan, TEFC motor, suction screen, make up & quick fill arrangement, over flow & drain connection, suitable steel ladder etc.. and conforming to standard specification. (Makes: Advance/Bell/Flowtech]
Hot Water (inlet) Temperature : 36.40°C
Cold Water Temperature : 32.20°C
Wet Bulb Temperature : 28.30°C
Water flow rate : 9120.00 LPM
Fan material & Type : Cast Al. aluminum with MS HDG Hub, Axial flow.
Motor details: - Make : New India (NIEC)/Hindustan Electric/ABB Type : Squirrel Cage (IP55), TEAO, IE2
Electrical Characteristics : 415Volts+/-10%, 50Hz, 3 PH AC Supply.
1
1471500
1471500
... More
CHILLED PIPE INSULATION WORK
-
-
-
... More
Chilled / Hot / Condensate Drain Water Piping With Nitrile Rubber Insulation & Aluminium Cladding
Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled / hot water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 Kg / m3 density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class 'O' insulation applied by suitable adhesive covered complete including repairing of damage to building etc. as per specifications and as required complete in all respect.
-
-
-
... More
Note:-The Pipes of sizes 150 mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.
-
-
-
... More
100mm dia (32 mm thick inssuation)
360
3386
1218960
... More
Valves & Strainer
Supply, installation, testing and commissioning of following valves in chilled / hot water line as per specification given in the tender. Valves shall be insulated as per pipe insulation material & thickness given above.
-
-
-
... More
100MM dia BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/ hot eater circulation as specified
12
7544
90528
... More
100MM Balancing valve with Built in measuring facility with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled /hot water circulation as specified
6
22592
135552
... More
100MM Y-Strainer of ductile CI body flangedd ends with stainless steel strainer for chilled /hot water circulation including insulation as specified
6
16687
100122
... More
Pressure Gauges
Supply, installation, testing and commissioning of pressure guage with gun metal/brass valves complete as required of approved make
12
1359
16308
... More
Thermometer
Providing & fixing in position the mercury in glass industrial type thermometers.
12
1185
14220
... More
Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc. as per specifications. (MAKE : TATA, SAIL, JINDAL, - DUCTOFAB, ZECO, ROLASTAR - GRIPPLE, MAPRO).
40
8005
320200
... More
Condenser Water Piping for cooling tower
-
-
-
... More
Supplying, fixing, testing and commissioning of condenser water pipes of following sizes of MS 'C' class along with necessary clamps, vibration isolators and fittings such as bends, tees,etc. But excluding valves, strainers, guages etc. adequately supported on rigid supports duly painted/ buried in ground excavation and refilling etc. as per specification and as required complete in all respect.
-
-
-
... More
Note :- The Pipes size 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per Is : 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. And from minimum 7 mm thick Ms sheet for pipes of 400 mm dia and above. (MAKE : APL APOLLO, TATA, JINDAL STAR).
-
-
-
... More
300MM dia
40
8962
358480
... More
200MM dia
12
7559
90708
... More
150MM dia
48
6278
301344
... More
Valves & Strainer
Supply, installation, testing and commissioning of following valves in chilled / condenser water line as per specification given in the tender.
-
-
-
... More
BUTTERFLY VALVE (MANUAL) with CI body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified.
-
-
-
... More
150MM dia
1
7991
7991
... More
200 mm dia
1
16083
16083
... More
300 mm dia
2
19323
38646
... More
BOOM BARRIER SYSTEM
-
-
-
... More
Note :Boom barriers shall be planned for the main gate operation with automated Induction and safety loop. The system suppliers shall submit a schematic and the technical literature on the system proposed along with the requirements for interconnection cables. The system shall have a suitable power pack to suit the requirement complete in all respects.
-
-
-
... More
Supply, Installation, testing and commissioning of 4 meters length electromechanical motorized automated boom barrier with 100% duty cycle with power supply unit , photo sensors & Remote control. This shall be with safety features like Induction and safety loop etc with remote operating facility with remote control unit, along with 04 nos of photo cells with each boom barrier. The system shall be complete in all respects along with all fixing accessories.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. [Makes: Godrej/FAAC]
2
160000
320000
... More
Supply and fixing of 1.8/1.9/2.0TR, 3 Star capable of delivering not less than 21600 BTU/hr and above with operating on refrigerant R-410A / R-32INVERTER Model Cool type split AC unit with high wall mounted Single Split indoor unit and outdoor condensing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord with cordless remote control etc., dual barrier coating in order to protect coil form oxidation. Mitsubishi / O General / Toshiba (prevailing models in the market)
3
74018
222054
... More
Supply, fixing, testing and commissioning of 350 mm dia Butterfly valve of PN-16 rating with Cast Iron body, SGI (Nylon Coating) disc, EPDM Seat, SS 431 Shaft with Gear operated, wafer type including transportation charges to work site and labour charges for lowering and keeping in position, incidental & operational charges etc., complete for finished item of work for emergency replacement incase of failure of existing valves of cooling towers 1 and 2. [Makes: Advance/L&T/Audco/ Honeywell]
4
40443
161772
... More
Supply, Delivery and fixing of 350 mm Dia D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) (PN 1.6 (MPa) conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; including conveyance to work site, labour charges for lowering and keeping in position, incidental & operational charges etc., complete for finished item of work to replace the defective ones pertaining to condenser pipe line if required. [Makes: Advance/L&T/Audco/Honeywell]
1
70950
70950
... More
Servicing of pump and motor including Mechanical seal, bearings, housing gasket with sealant for Xylem make pumps for the following models including all incidental charges.
-
-
-
... More
Primary Chilled water pump of Xylem Make - Model No: 1510 6G, 1450 R.P.M, 22 kW
3
30000
90000
... More
Secondary Chilled water pump of Xylem Make - Model No: 1510, 6BC,1450 R.P.M, 15 kW
3
28000
84000
... More
Supply of 95 A (AC3), 3 Pole Power Contactor conforming to IS/IEC 60947-4-1 and IEC 60947-4-1 including cost, conveyance charges to site etc., complete to replace the defective ones in the starter panel pertaining to 3-Phase, 415 V, 50 Hz, 1455 RPM, 20 HP Induction motor of condenser water pump. [Makes : L&T (Cat. no CS94136)/Seimens/ Schneider]
8
16186
129488
... More
Manufacture, Supply, & Delivery of 160 mm Outer dia HDPE Pipe (6.0 kg/Sq.cm) of PE - 100 Grade, conforming to IS 4984-2016 for draining out water from cooling tower including transportation to anywhere in A.P etc., complete but excluding fittings and all taxes.
40
813
32520
... More
Manufacture, Supply, & Delivery of the following HDPE (PE –100 Grade) fittings conforming to IS 4984 - 2016 including transportation to anywhere in A.P.
-
-
-
... More
Cost of PIPE ENDS LONG NECK
10
669
6690
... More
Cost of MS FLANGES
10
422
4220
... More
Cost of END CAPS
1
399
399
... More
Cost of TEES
2
1937
3874
... More
Cost of BENDS
1
1610
1610
... More
Cost of Bolt/Nut/Washer (hot dipped galvanized)
10
1659
16590
... More
Supply and fixing of 415 V, 50 Hz, 5.5 kW/7.5HP, 710 RPM, IP 65, 3-Phase induction motor, IE-2 efficiency class, and insulation class F etc., for cooling tower on terrace including cost, transportation and labour charges for fixing, testing to full load, commissioning charges with all incidental expenses etc., in place of existing unserviceable motor and buyback of the same in "as is where is" condition. [Makes : ABB/NewIndia (Navyug Electric Motors and Pumps]
2
42229
84458
... More
Supply and fixing of Cooling Tower fills of 2 ft./1ft., in place of defective ones including cost, conveyance and labour charges etc., complete.
450
360
162000
... More
Supply and fixing of Float valve in place of the defective ones, including cost, conveyance and labour charges etc., complete.
2
5249
10498
... More
Supply and fixing of Cooling Tower Nozzle in place of the defective ones, including cost, conveyance charges and labour charges etc., complete.
55
1356
74580
... More
FRP coating to arrest water leakages on MS pipe lines with FRP Materials (Resin, Mat, Catalyst, Accelerator, Brush etc.,) including cost of all materials, transportation, and labour charges with all incidental expenses etc., complete.
16
500
8000
... More
Supply of 18 A (AC3), 3 Pole Power Contactor conforming to IS/IEC 60947-4-1 & IEC 60947-4-1 including cost, conveyance charges etc., complete to replace the defective ones in the starter panel pertaining to 3 -Phase, 415 V, 50 Hz, 1455 R.P.M, 7.5 HP Induction motor of cooling tower. [Makes: L&T (CS94100)/Seimens/Schneider]
6
1161
6966
... More
Supply of 100 A, 415 V Bakelite Open Type 6 Way Connector code AI - 10003 including transportation to site etc., complete to replace the defective ones and for immediate replacement incase of failure.
6
2050
12300
... More
Supply of 70 A (AC3), 3 Pole Power Contactor conforming to IS/IEC 60947-4-1 & IEC 60947-4-1 including cost, conveyance charges to site etc., complete to replace the defective ones and for immediate replacement incase of failure. [Makes : L&T (CS97076)/Seimens/ Schneider]
6
8559
51354
... More
Supply of Front Mounting Add-on aux. Contact Block (2 NO + 2 NC) including transportation charges to site etc., complete to replace the defective ones and for immediate replacement incase of failure. [Makes: L&T (Cat No: CS94114)/Seimens/Schneider]
6
504
3024
... More
Supply of 6W LED Slim Panel Round/Square suitable for Recessed/Surface mounting made of die-cast Aluminum body with powder coating, Acrylic diffuser with driver as per IS:15885 (Part 2/ Sec 13): 2012, operating voltage range of 150 to 265 Volts AC, P.F 0.9, Surge protection: 2 kV, THD10%, with high power LEDs, having system efficacy of 120 lumens/watt, CCT: 5700 K, minimum CRI70, etc., complete with earth connection and warrenty not less than two years to replace the dysfunctional ones in existing lifts including transportation charges to site with all incidental expenses etc., complete. [Makes: Havells/GE-Venture/Wipro/ Crompton/Signify]
30
449
13470
... More
Supply of 6-32A, 10 kA- SP MCB (C/D Curve) ISI Mark to replace the defective ones in control panels including transportation charges etc., complete. [Makes:Legrand-DX3/Schneider-A9/Hager-h3/Siemens-5SX4]
30
259
7770
... More
Cost for cooling water treatment program for cooling tower at site including cost of chemicals, transportation and labour charges with all incidental charges etc., complete.
4
17000
68000
... More
Supply of 600mm (Width) x 75mm (Depth) x 2.0 mm (Thickness) size of Hot Dipped Galvanized Iron ladder type cable trays with rungs at span of 250 mm including horizontal and vertical bends, reducers tees, cross members and other accessories as required and duly suspended from the ceiling/wall with suspenders and etc., complete to replace the rusted onces on terrace for panel cables of cooling tower.
30
1041
31230
... More
Supply of 24 V, 40 A Battery Charger conforming to the technical specifications such as input Voltage 170V to 270V operating range, Operating Temperature -20 to 85 Deg C, Low Standby Power Consumption and High Efficiency, High Input Output isolation 3000 V AC and High surge immunity, Input over and under voltage protections, Output short circuit, over-load, over-voltage protection, charging battery from zero volts, drawing zero current from the battery, Three Stage Charging etc., complete to replace the defective ones for existing 1500 kVA Diesel generator including transportation charges to site with all incidental expenses etc., complete. [Make : NHP Power Systems LLP]
1
9800
9800
... More
Replacing the existing unserviceable Deep Groove Ball Bearing pertaining to 3 -Phase, 415 V, 50 Hz, 710 RPM, 7.5 HP Induction electric motor of Cooling Tower with new ones with due alignment of the shaft and tested, and special T & P [Makes : NBC/SKF]
4
1852
7408
... More
Condenser pipe line cement plastering :-
Supply and laying of anti-corrosive grade - 1 bitumen paint of black colour laying for 1 running meter , add one layer of G.I flexible mesh & cement plastring 1:4 with 20mm thick for exisiting 500MM dai Condenser water pipe line
120
1263
151560
... More
Fabrication, transportation and supply of wall mounted 7.5HP DOL Starter control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Makes: Makes: Siemens / Crompton / L&T (MK2 DOL)
4
10998
43992
... More
Voltmeter ; 0-500 V 96x96mm size.
-
-
-
... More
0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No.
-
-
-
... More
Single phase preventor of suitable range - 1No.
-
-
-
... More
32 A TP, 10KA MCB. - 1No
-
-
-
... More
Indication lamps (R-Y-B) with switch control - 1set
-
-
-
... More
Voltmeter & Ammeter selector switch - 2 Nos
-
-
-
... More
Cost for descaling of 600 TR Condenser as per copy of work methodology adopted for descaling of Chiller/Condenser, including cost of consumables, travel and all other incidental expenses to site @ Millennium tower-A building at IT/ITES-SEZ, HILL no. 3 in Madhurawada. [Vendor should be an OEM i.e., M/s. Carrier Air Conditioning and Refrigeration Limited or Approved Service Centre (ASC) having experience in maintenance/service/repair of Chillers. A proof of recommendation letter (on letter head) from the OEM branch office should be submitted along with Approved service centre validity certification]
1
60000
60000
... More
XLPE ARMOURED ALUMINIUM UG CABLES : Supply, transportation and laying of the following XLPE insulated 1100 V grade Armoured Aluminium UG cable as per specification conforming to IS: 7098 (Part-I)/1554-I in existing G.I/HDPE/Hume pipe laid along the dug out cable trench including cost, conveyance, testing, and labour charges etc., complete. [Makes: Havells/Polycab/Unicab/Universal]
250
235
58750
... More
Supply installation testing and commissioning of Indoor Multimode [62.5/125um] glass 6 Fiber Optic Cable as per latest amendments of TIA /EIA 568 B.3, GR 409 CORE / UL listed NEC 770 Standards in existing raceways/ PVC Conduits/ slotted channels including making Terminations to active passive equipment with ferruling at both ends for identification with necessary tools for Terminations and testing required. Makes: Makes: Systimax /Panduit/ Siemond/ Legrand
400
202
80800
... More
No. of BOQ items: 89(Eighty Nine) only
-
-
52781025
... More
(Rupees Five crores Twenty Seven lakhs Eighty One thousand and Twenty Five Only)
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements