Andhra Pradesh Industrial Infrastructure Corporation Tender

7.5 m OCTAGONAL POLES : Supply, fabrication, transportation and erection of single section hot dip galvanized continuously tapered 7.5 m long Octagonal Pole with 1.0 m long single arm bracket fabricated from MS galvanized pipe of 40 mm dia (NB) with 10 deg. tilt suitable to withstand wind speed of 180 kmph with BSEN-10025 grade S 355 JO steel plate for shaft (3 mm thick), bottom dia. of 130 mm A/F, top dia. 70 mm A/F, Steel plate conforming to IS 2062 for base plate of size 220 mm (L) x 220 mm (B) x 12 mm (T) welded to bottom of the pole with reinforced camouflaged junction box and hinged door with opening arrangements incorporating 6A-10 kA-SP MCB, 63A/500 V-4 Way Bakelite power block connector etc., mounted on 3 mm thick Hylam/Bakelite Sheet, including excavation of pit in soil to a depth of 1.00 m for casting M 20 grade vibrated cement concrete pedestal of size 0.45 m (Length) x 0.45 m (Breadth) x 1.2 m (Height) with TMT Steel reinforcement of "Fe 500 D" grade weighing around 10 kg having Main Vertical Reinforcement shall be in 8 nos. bars of 10 mm dia and Shear Reinforcement (Stirrups) shall be in 8 nos. bars of 8 mm dia @ 140 mm C/C duly embedded with 4 nos. of M 20 x 700 mm long 'J' type Anchor bolts (EN 8 grade) along with template, and 1.2 m long 78 mm OD/63 mm ID DWC HDPE pipe for entry and exit of UG cable, curing for 7 days, and labour charges for erection of pole on pedestal with M 20 nuts and M 20 plane washers, and filling up the space between Base Plate and Top of Pedestal with Cement Concrete blocking access via the pole to prevent rodents and other critters etc., as directed by field engineers during execution for finished item of work, including cost of all materials, conveyance to site, centering, hire, operational charges of all T&P, labour for fabrication and other operations etc., complete. [Octagonal Pole makes: Bajaj/Valmont; MCB makes: Legrand-DX3 / Schneider-A9/Hager-h3/Siemens-5SX4/Lauritz Knudsen (Formerly L&T)-AU]]

60 W LED STREET LIGHTS: Supply, installation, testing and commissioning of 60 W rated power (max.) LED Street light luminaire with housing fabricated from Pressure die cast or extruded Aluminium with a grey paint/powder coating, an extra clear toughened glass/PC diffuser, Mech. impact resistance IK ≥ 07, Conforming to IP66, High power LEDs with Secondary optic lens achieving overall system lumens of 7,200 @ CCT 4000 K/5700K (ANSI), SDCM ≤ 6, CRI (Ra) ≥ 70, Junction temp. 70 deg. C, lifetime residual flux of 70% (L70) @ 50,000 burning hours at Ta = 35 deg. C, powered by BIS certified Potted (Constant Current) Driver having efficiency 90%, input voltage : 120 V-270 V AC, freq.: 50/60 Hz, P.F 0.9, T.H.D 10% at 110 V AC, internal surge protection of 4/4 kV and an additional surge protection device (SPD) of 10/10 kV (in both Common & Differential Modes) with luminaire performance complying to IS 10322 (Part 5/Sec-3) with warranty not less than two years etc., compatible for mounting on octagonal pole bracket of 40 mm dia (NB) along with run of 1.1 kV grade PVC insulated 3 Core x 1.5 Sq.mm Sheathed flexible copper cable as per IS 694/1990 for extn. of supply with earth connection as required including cost of all materials, conveyance, labour and incidental charges etc., complete. [a) LUMINAIRE MAKES : Signify (Urban Edge)/GE-Venture (Caris Neo)/Kesslec/Crompton (Raptor Pro)/Wipro (Skyline Plus); b) LED MAKES : PHILIPS LUMILEDS/ CREE/NICHIA/OSRAM/ SAMSUNG/LG; 3 Core x 1.5 Sq.mm Wire: Finolex/Polycab/Havells]

DWC HDPE PIPE : Supply, transportation and laying of 50 mm outer dia and inner dia 38 mm double walled corrugated (DWC) HDPE pipe having corrugation on the outer wall and plain surface inner wall conforming to BSEN-500 86/IS : 14930 Part - II along the cable trench dug out in soil for safeguarding UG cable with all accessories like couplers, bends, end caps, Tees etc., complete, including cost, conveyance, and labour charges etc., complete but, excluding charges for soil excavation and back filling charges. [Makes : DURA LINE (Dura Guard)/Precision/CPE or any ISI approved make having ISI mark]