Agricultural Marketing Department Tender

Construction of 2000MT Capacity Godown;Roofing will be provided with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove.

Construction of 2000MT Capacity Godown;Plastering 12 mm thick in single coat in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting Grooves etc., but excluding seigniorage charges, sales other taxes on all materials, complete as per the drawing, technical specification clauses APSS 901, 903 904 for finished item of work or as directed by the Engineer-in-Charge for Brick Wall and RCC exposed faces.

Construction of 2000MT Capacity Godown;Plastering 20 mm thick in single coat in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting Grooves etc., but excluding seigniorage charges, sales other taxes on all materials, complete as per the drawing, technical specification clauses APSS 901, 903 904 for finished item of work or as directed by the Engineer-in-Charge for Brick Wall and RCC exposed faces.

Construction of 2000MT Capacity Godown;White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, and including all operational incidental charges and all labour charges etc., but excluding conveyance charges of materials complete, for finished item of work or as directed by the Engineer-in-Charge charges

Construction of 2000MT Capacity Godown;VRCC M-25 Grade - Supply and placing of the DESIGN MIX CONCRETE (WEIGH BATCH at SITE) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement with minimum cement content as per IS code from standard suppliers approved by the department, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work (APSS No. 402) or as directed by Engineer-in-Charge but including centering scaffolding, shuttering for FOOTINGS

Construction of 2000MT Capacity Godown;VRCC M-25 Grade - Supply and placing of the DESIGN MIX CONCRETE (WEIGH BATCH at SITE) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement with minimum cement content as per IS code from standard suppliers approved by the department, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work (APSS No. 402) or as directed by Engineer-in-Charge but including Steel centering scaffolding, shuttering-Unsupported height upto 3.66mts for COLUMNS

Construction of 2000MT Capacity Godown;VRCC M-25 Grade - Supply and placing of the DESIGN MIX CONCRETE (WEIGH BATCH at SITE) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement with minimum cement content as per IS code from standard suppliers approved by the department, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work (APSS No. 402) or as directed by Engineer-in-Charge but including Steel centering scaffolding, shuttering-Unsupported height upto 3.66mts for LINTELS

Construction of 2000MT Capacity Godown;VRCC M-25 Grade - Supply and placing of the DESIGN MIX CONCRETE (WEIGH BATCH at SITE) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement with minimum cement content as per IS code from standard suppliers approved by the department, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work (APSS No. 402) or as directed by Engineer-in-Charge but including centering scaffolding, shuttering for PLINTH BEAM

Construction of 2000MT Capacity Godown;Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308) - in Ordinary Soil-Manual Means-Upto 3M depth

Construction of 2000MT Capacity Godown;Plain Cement concrete (1:5:10) using 40 mm metal with concrete mixer. All work upto plinth level: PCC (1:5:10) Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 40mm size nominal machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials for finished item of work, but excluding Centering Scaffolding, Shuttering

Construction of 2000MT Capacity Godown;VRCC M-25 Grade - Supply and placing of the DESIGN MIX CONCRETE (WEIGH BATCH at SITE) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement with minimum cement content as per IS code from standard suppliers approved by the department, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work (APSS No. 402) or as directed by Engineer-in-Charge but including centering scaffolding, shuttering for PEDESTALS (below plinth)

Construction of 2000MT Capacity Godown;Providing concrete for plain concrete in open foundations using 40 mm Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 1500, 1700 2100 MORTH. - P.C.C. grade M 20 (Design Mix) MORTH 12.8 B using 40 mm Graded Metal

Construction of 2000MT Capacity Godown;Supply and fixing in position of 0.75 x 0.90M size steel Air inlets with rolled steel angles having three frames. The outer side frame of 35x35x6mm M.S. equal welded with 12mm dia plain mild steel rods at 75mm C/C both the ways, Using 25 x 6mm MS flats for outer frame for fixing of 14/16 guage GI Fly proof Mesh, 35x35x6mm frame for Airvent Frame and 18x5mm MS flat for window shutters and 14 guage sheet for windows including cost and conveyance of all materials and fabrication charges, labour cha rges for fixing in position, transport charges, all taxes etc., for finished item of work.

Construction of 2000MT Capacity Godown;Supply and fixing of 110 mm dia PVC 4 kgs/Sqcm. Pipe (prince/Sudhakar or any ISI make) including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work.

Construction of 2000MT Capacity Godown;Supply and fixing of 2.44mt span Verandah truss using 48.30mmOD (M),internal members with 33.7mm OD MS pipe (L) and providing 200x200x10mm thick plates 2 nos, 3 nos cleats 150x100x6mm size to support the purlins and bolts for fixing , including cost and conveyance of all materials, all fabrication charges,redoxide painting, transportation to site errect. (Drawings enclosed) as per standard specification for finished item of work. For Verandah Truss

Construction of 2000MT Capacity Godown;Supply and fixing for 20mm dia MS foundation boltas on 0.60 Mtrs. Long including cost and conveyance of all materials, labour charges etc., complete.

Construction of 2000MT Capacity Godown;Painting with Synthetic Enamel paints - Two Coats - For New Iron Work using ready mixed Synthetic Enamel paint in all shades Grade-I including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 1212 or as directed by the Engineer-In-Charge

Construction of 2000MT Capacity Godown;Filling with Carted Gravel in trenches, sides of foundations basement from approved quarry consolidating deposited layer by watering and ramming, including all operational, incidental, labour charges, complete including cost and conveyance of sand / gravel for finished item of work. (APSS No 309 310).

Construction of 2000MT Capacity Godown;VRCC M-25 Grade - Supply and placing of the DESIGN MIX CONCRETE (WEIGH BATCH at SITE) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement with minimum cement content as per IS code from standard suppliers approved by the department, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work (APSS No. 402) or as directed by Engineer-in-Charge but including Steel centering scaffolding, shuttering-Unsupported height upto 3.66mts for BEAMS

Construction of 2000MT Capacity Godown;Poly sheet 125 microns

Construction of 2000MT Capacity Godown;Brick Masonry in CM (1:6) with Bricks with traditional size 23 x 11 x 7 cms 2nd class: Brick Masonry 230 mm thick with Cement Mortar (1:6) prop. (Cement:Sand) using Common Burnt Clay Bricks Non-Modular of traditional size 23 x 11 x 7 cm 2nd Class from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., but excluding seigniorage charges, complete as per drawing and Technical specifications cluase APSS 504 for finished item of work or as directed by Engineer-in Charge for panel walls in Super-Structure, parapet walls.

Construction of 2000MT Capacity Godown;Painting:-2) Exterior walls are painted with one coast of primer and 2 coats of exterior emulsion paint .

Construction of 2000MT Capacity Godown;Grooves 2-3 mm

Construction of 2000MT Capacity Godown;SF HYSD bars (Lap splicing) - Providing High Yield Strength Deformed (HYSD) (Fe 415 grade as per IS 1786-1979) of different d iameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for rein forcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Construction of 2000MT Capacity Godown;Plastering 12 mm thick in single coat in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting Grooves etc., but excluding seigniorage charges, sales other taxes on all materials, complete as per the drawing, technical specification clauses APSS 901, 903 904 for finished item of work or as directed by the Engineer-in-Charge for Brick Wall and RCC exposed faces.

Construction of 2000MT Capacity Godown;Plastering 20 mm thick in single coat in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting Grooves etc., but excluding seigniorage charges, sales other taxes on all materials, complete as per the drawing, technical specification clauses APSS 901, 903 904 for finished item of work or as directed by the Engineer-in-Charge for Brick Wall and RCC exposed faces.

Construction of 2000MT Capacity Godown;VRCC M-25 Grade - Supply and placing of the DESIGN MIX CONCRETE (WEIGH BATCH at SITE) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement with minimum cement content as per IS code from standard suppliers approved by the department, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work (APSS No. 402) or as directed by Engineer-in-Charge but including Steel centering scaffolding, shuttering-Unsupported height upto 3.66mts for COLUMNS

Construction of 2000MT Capacity Godown;VRCC M-25 Grade - Supply and placing of the DESIGN MIX CONCRETE (WEIGH BATCH at SITE) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement with minimum cement content as per IS code from standard suppliers approved by the department, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work (APSS No. 402) or as directed by Engineer-in-Charge but including Steel centering scaffolding, shuttering-Unsupported height upto 3.66mts for BEAMS

Construction of 2000MT Capacity Godown;VRCC M-25 Grade - Supply and placing of the DESIGN MIX CONCRETE (WEIGH BATCH at SITE) corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement with minimum cement content as per IS code from standard suppliers approved by the department, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work (APSS No. 402) or as directed by Engineer-in-Charge but including Steel centering scaffolding, shuttering-Unsupported height upto 3.66mts for SLABS 150mm thick

Construction of 2000MT Capacity Godown;Brick Masonry in CM (1:6) with Bricks with traditional size 23 x 11 x 7 cms 2nd class: Brick Masonry 230 mm thick with Cement Mortar (1:6) prop. (Cement:Sand) using Common Burnt Clay Bricks Non-Modular of traditional size 23 x 11 x 7 cm 2nd Class from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., but excluding seigniorage charges, complete as per drawing and Technical specifications cluase APSS 504 for finished item of work or as directed by Engineer-in Charge for panel walls in Super-Structure, parapet walls.

Construction of 2000MT Capacity Godown;SF HYSD bars (Lap splicing) - Providing High Yield Strength Deformed (HYSD) (Fe 415 grade as per IS 1786-1979) of different d iameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for rein forcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)