Agricultural Marketing Department Tender

Drilling of bore well Pulivendula;ELEC-1.5.4.f Supply of ?3 core 4.0 Sqmm..PVC insulated and sheathed FRLS copper round cable for voltage up to 1100V as per IS 694/1990. Makes: Finolex / RR Kable / Havells/KEI/ Polycab/ Orbit/Gloster

Drilling of bore well Pulivendula;Supply of 50mm PPR Ball Valve conforming to DIN Standards 8077/8092 including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work.

Drilling of bore well Pulivendula;Supplying Fixing 50 mm Nominal Bore GI pipe Medium Grade properties weight as per IS 1239 ISI mark with GI fittings including cost of pipe and conveyance of all materials to work site and all labour charges, for fitting charges etc., complete for finished item of work.

Drilling of bore well Pulivendula;ELEC-5.4.6.i Supply and Transportation of ???..,5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 6" Bore well. 10HP, 20-24 Stage Makes: Pluga / U-Neel / Sterling / Falcon / Kumar / Unnati zen/Duke/Lada/Ellen/Suguna/UNItek/KSP

Drilling of bore well Pulivendula;Drilling of Bore well 165 mm dia. above 90.00 m up to 150.00 m depth with DTH Rig - Drilling of Bore well by down the hole hammer drilling to a finished dia of 165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges and all taxes, but excluding the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I II 1979 and amended from time to time.

Drilling of bore well Pulivendula;Drilling of Bore well 165 mm dia. up to 90.00 m depth with DTH Rig - Drilling of Bore well by down the hole hammer drilling to a finished dia of 165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges and all taxes, but excluding the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I II 1979 and amended from time to time.

Drilling of bore well Pulivendula;Drilling of Bore well 165 mm dia. above 150.00 m up to 250.00 m depth with DTH Rig - Drilling of Bore well by down the hole hammer drilling to a finished dia of 165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges and all taxes, but excluding the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2 800 Part I II 1979 and amended from time to time.

Drilling of bore well Pulivendula;ELEC-5.4.17.b Fabrication ,transportationand and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRC A sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipmen t with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 p hase motor pump sets. Voltmeter ; 0-500 V 96x96mm size. Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab - 1No 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size). Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab- 1No. Single phase preventor of suitable range Makes: L&T / Minilec / Powertec. - 1No. 32 A TP, 10KA MCB. Makes: Legrand / Schneider / - 1No Indication lamps (R-Y-B) with switch c ontrol - 1set Voltmeter & Ammeter selector switch - 2 Nos Supply and fixing of ISI Mark suitable capacitor Makes: L&T / Siemens / Sc hneider / Epcos/Havells. Delta Starter of Make C&S/Crompton / L&T / Siemens/BCH.Above 15 HP up to 20 HP

Drilling of bore well Pulivendula;ELEC-1.5.4.e Supply of ?3 core 2.5 Sqmm..PVC insulated and sheathed FRLS copper round cable for voltage up to 1100V as per IS 694/1990. Makes: Finolex / RR Kable / Havells/KEI/ Polycab/ Orbit/Gloster

Drilling of bore well Pulivendula;Supplying Fixing 65 mm Nominal Bore GI pipe Medium Grade properties weight as per IS 1239 with GI fittings such as elbows tees couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for GI bends union and GI connectors with checkout and socket Tata or Zenith make or equivalent including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work.

Drilling of bore well Pulivendula;Supplying Fixing 20 mm Nominal Bore GI pipe Light Grade properties weight as per IS 1239 ISI mark with GI fittings including cost of pipe and conveyance of all materials to work site and all labour charges, for fitting charges etc., complete for finished item of work.

Drilling of bore well Pulivendula;Supplying Fixing 32 mm Nominal Bore GI pipe Light Grade properties weight as per IS 1239 ISI mark with GI fittings including cost of pipe and conveyance of all materials to work site and all labour charges, for fitting charges etc., complete for finished item of work.

Drilling of bore well Pulivendula;Labour Charges only for the work of Supplying Fixing 32 mm Nominal Bore GI pipe Light Grade properties weight as per IS 1239ISI mark with GI fittings including the cost of pipe its fittings labour charges complete

Drilling of bore well Pulivendula;Labour Charges only for the work of Supplying Fixing 20 mm Nominal Bore GI pipe Light Grade properties weight as per IS 1239ISI mark with GI fittings including the cost of pipe its fittings labour charges complete