Acharya NG Ranga Agricultural University Tender

Strengthening of Existing LT Electrical Line with Replacement of Burnt Panel Boards at Agricultural;Supply and fixing of LT single phase 2 wire cross arm with 50x50x6 MS angle of 2'5"(wt 4.2 Kgs) with 1 No LT shackle / pin insulators and 1no CI knob with necessary clamping arrangements,cutting ,drilling and welding including labour charges etc., complete

Strengthening of Existing LT Electrical Line with Replacement of Burnt Panel Boards at Agricultural;Supply and errection of GI stay set of dia 20mm,2.4 mtr long stay rod and anchor plate 380mmx 380mm x 6.4mm including stay clamps , turn buckle and GI stay wire tight end through strain insulator including excavation of pit and cc work etc.,complete

Strengthening of Existing LT Electrical Line with Replacement of Burnt Panel Boards at Agricultural;Supply, Transportation and run of 5 of 7/2.50 AAAC / weasel (34 Sqmm) conductor for Overhead line with stringing, binding with transportation and suitable size of clamps for Jumpering etc., complete.

Strengthening of Existing LT Electrical Line with Replacement of Burnt Panel Boards at Agricultural;Supply, Transportation and run of 2 of 7/2.50 AAAC / weasel (34 Sqmm) conductor for Overhead line with stringing, binding with transportation and suitable size of clamps for Jumpering etc., complete.

Strengthening of Existing LT Electrical Line with Replacement of Burnt Panel Boards at Agricultural;Dismantling & Removing of existing damaged & unserviceable articles such as poles & conductors cross arms etc., collecting & stacking carefully as directed by department Engineers complete job work.

Strengthening of Existing LT Electrical Line with Replacement of Burnt Panel Boards at Agricultural;Supply and transportation of 120 SqmmX 3.5 core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / KEI / Gloster / Polycab /RR Kabel

Strengthening of Existing LT Electrical Line with Replacement of Burnt Panel Boards at Agricultural;Supply and transportation of 150 SqmmX 3.5 core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / KEI / Gloster / Polycab /RR Kabel

Strengthening of Existing LT Electrical Line with Replacement of Burnt Panel Boards at Agricultural;Earth work excavation of Trench in hard ground soil, laying of U.G cables from 70 sqmm to 400Sqmm on sand cushion covering the cable with bricks and back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete.

Strengthening of Existing LT Electrical Line with Replacement of Burnt Panel Boards at Agricultural;Supply and fixing of suitable thermo plastic water tight box including 10 ka C/D curve ISI Mark 32Amps DP MCB Control Switch with enclosure box with suitable clampset, bolts and nuts with wire connections including labour charges as directed by Engineer in Charge etc., of MCB Makes: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Havells STADx /L&T-AU/Indo Asian-Opti pro/ HPL (Techno)

Strengthening of Existing LT Electrical Line with Replacement of Burnt Panel Boards at Agricultural;Supply and run of 1of 10sqmm WPTC (weather proof twin core) service wire along with 10 SWG GI wire for supporting through PVC cleats with all accessories including all labour charges etc.,complete.,of Makes: Gold Medal / Million / GM / Vimal / Finecab / Nakoda / Plaza/ Payal / Sudhakar/ Rajnigandha/ Airson/Orbit/ ollvin/ Beljin

Strengthening of Existing LT Electrical Line with Replacement of Burnt Panel Boards at Agricultural;Supply, transportation and fixing of 90W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass,Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having System efficacy > 100 lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322(Part 5 / Sec-3), Driver surge protection 4KV, external Surge protection 10 KV with optics distribution ,THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc.,with fixing to suitable GI bracket along with clamps bolts and nut to fix on the wall or on pole with necessary wire connection including all labour charges fixing as directed by the department etc., complete a) Luminaire Make : Wipro(Skyline) / Philips (Greenline Extra) / GE-Venture / Crompton(Nexus / Hawk series) / Bajaj (Edge) / Halonix (Modular/ Lumos-Super) / Havells (Endura Series)/Greenlites(HI-Lux) /Capart(Premium)/Polycab/Keselec / HPL(City Vision)/Jaquar (Premium) /Eveready /Surya (Pollux) / Fortune Artt (Leaf) b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG.

Strengthening of Existing LT Electrical Line with Replacement of Burnt Panel Boards at Agricultural;Supply, transportation and fixing of 30W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass,Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having System efficacy > 100 lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322(Part 5 / Sec-3), Driver surge protection 4KV, external Surge protection 10 KV with optics distribution ,THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc.,with fixing to suitable GI bracket along with clamps bolts and nut to fix on the wall or on pole with necessary wire connection including all labour charges fixing as directed by the department etc., complete a) Luminaire Make : Wipro(Skyline) / Philips (Greenline Extra) / GE-Venture / Crompton(Nexus / Hawk series) / Bajaj (Edge) / Halonix (Modular/ Lumos-Super) / Havells (Endura Series)/Greenlites(HI-Lux) /Capart(Premium)/Polycab/Keselec / HPL(City Vision)/Jaquar (Premium) /Eveready /Surya (Pollux) / Fortune Artt (Leaf) b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG.

Strengthening of Existing LT Electrical Line with Replacement of Burnt Panel Boards at Agricultural;Supply, design, Installation, Testing and commissioning of free standing floor mounted dust and vermin proof compartmentalised cubical panel of required size as per site condition made out of CRCA sheet, required hardware, duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/ switchgear. Thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be of 2.0mm above 600mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be abricated from CPRI approved fabricator) for mounting and suitable for 415 V, 50 Hz, AC supply including supply and erection of all switchgears and suitable Aluminum busbars, SMC/DMC , cable crimping and connections as required including labour charges etc., complete Job Incomer: 1. 250A 35/36KA FP MCCB- 1No, 2. 250A 4 pole onload change over- 1 No, Out going feeders:63A 4 pole MCCB-7No's digital voltmeter(0-415V) and Ammeter (0- 800A) with 3Nos.CT 400/5A and selector switches, 400A aluminium busbars of reuqired size. Makes: L&T- D shine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak2/HPL-Techno etc., complete as directed by the department Engineer in charge (Out door panel board)

Strengthening of Existing LT Electrical Line with Replacement of Burnt Panel Boards at Agricultural;Supply, design, Installation, Testing and commissioning of free standing floor mounted dust and vermin proof compartmentalised cubical panel of required size as per site condition made out of CRCA sheet, required hardware, duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/ switchgear. Thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be of 2.0mm above 600mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be abricated from CPRI approved fabricator) for mounting and suitable for 415 V, 50 Hz, AC supply including supply and erection of all switchgears and suitable Aluminum busbars, SMC/DMC , cable crimping and connections as required including labour charges etc., complete Job Incomer: 1. 250A 35/36KA FP MCCB- 1No, 2. 250A 4 pole onload change over- 1 No, Out going feeders:63A 4 pole MCCB-5No's digital voltmeter(0-415V) and Ammeter (0- 800A) with 3Nos.CT 400/5A and selector switches, 400A aluminium busbars of reuqired size. Makes: L&T- D shine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak2/HPL-Techno etc., complete as directed by the department Engineer in charge (Out door panel board)

Strengthening of Existing LT Electrical Line with Replacement of Burnt Panel Boards at Agricultural;Design, Fabrication, Supply & erection of cubical panel board for busbar chamber and 400A MCCB encloser box made out of CRCA sheet, required hardware, duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/ switchgear. Thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be of 2.0mm above 600mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be abricated from CPRI approved fabricator) for mounting and suitable for 415 V, 50 Hz, AC supply the following switch gears should be accomidate in the box with necessary holes provided to the bottom sheet for the incoming / outgoing UG cables as directed by the department during execution with 1 No 400 Amps 3 pole MCCB as incomer, 100 Amp 8 way copper busbar chamber with indicating LED lamps, necessary cable connections, bolts and nuts and etc complete., of (Out door panel board) Makes: L&T- D shine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak2/HPL-Techno

Strengthening of Existing LT Electrical Line with Replacement of Burnt Panel Boards at Agricultural;Supply and laying 25mm x 3mm Copper Flat (0.663Kgs/1Mtr) size Earth wire/ Strip in horizontal /Vertical run in Ground/ surface/ Recess including, revitting, soldering, saddles, making connection with PVC/ porcealin insulators etc as required

Strengthening of Existing LT Electrical Line with Replacement of Burnt Panel Boards at Agricultural;Providing independent earthing by excavating a trench to a deapth of 2.1m in all soils, as per size specified in the data using 40mm dia b-Class GI pipe of 2.5mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of slat and charcoal in layers and all labour charegs etc., complete. for small quarters.