Military Engineer Services Tender
To inquire about any e-tender the Andaman & Nicobar Islands government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder one can find every eprocurement Punjab tender on BidAssist. BidAassist has collated each and every Eproc Andaman & Nicobar Island Tender on its website. Looking for Andaman & Nicobar Island tenders online or going through the cumbersome government websites for it, has been made easier with the help of BidAssist.
Military Engineer Services - MES Tender
Housekeeping Services
Eprocure
Opening Date1 Sep 2022
Closing Date27 Sep 2022
Tender Amount₹ 45,00,000
Costs
EMD
₹ 90,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_MES_549070_1Bid Award Id
ViewTender No
8673/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Demolition of PCC block masonry, built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
10
-
-
... More
M&L for pre-cast cement concrete block masonry with solid blocks made up of (1:3:6) type C1 (using 20mm graded stone aggregate), masonry exceeding 10cm in width and setting in cement mortar (1:6) complete all as specified and directed.
8
-
-
... More
M&L for pre-cast cement concrete block masonry with solid blocks made up of (1:3:6) type C1 (using 20mm graded stone aggregate), masonry not exceeding 10cm in width and setting in cement mortar (1:4) complete all as specified and directed.
20
-
-
... More
Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., and removal of debris to outside MD land complete all as specified and as directed.
180
-
-
... More
M&L for rendering 15mm thick in two coats 5mm thick in CM (1:4) mixed with integral water proofing compound @ 3% by weight of cement over 10mm thick in CM (1:6) on fair faces of brick work or concrete, surfaces finished fair and even complete all as specified and as directed.
NOTE: Water proofing compound will be measured and paid separately under relevant item of this schedule.
160
-
-
... More
M&L for rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete, surfaces finished fair and even complete all as specified and as directed.
230
-
-
... More
Supply only integral water proofing compound.
39
-
-
... More
M&L for preparation of old plastered surfaces of walls by complete removal of existing treatment by scraping, washing, cleaning etc., and applying two coats of distemper oil emulsion over a coat of primer after filling the cracks with filler complete all as specified and as directed.
1000
-
-
... More
M&L for preparation of old plastered surfaces of walls/ concrete, kerb stones of any description over 10cm girth or width and applying one coat of synthetic enamel paint complete all as specified and as directed.
40
-
-
... More
M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer including levelling the surface complete all as specified and as directed.
230
-
-
... More
M&L for preparation of newly plastered surfaces of external walls of any description and applying two coats of weather proof antifungal (exterior grade) acrylic emulsion over a coat of primer from the same manufacturer complete all as specified and as directed.
160
-
-
... More
M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint of first quality over a coat of pink primer complete all as specified and as directed.
25
-
-
... More
M&L for preparation of old wooden surfaces of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint of first quality complete all as specified and as directed.
600
-
-
... More
M&L for preparation of old steel surfaces of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint of first quality complete all as specified and as directed.
200
-
-
... More
Dismantling stone slabs and tiles of any description or thickness in floors, aprons, risers of steps, skirting, dado etc., laid bedded and pointed in any mortar complete all as specified and as directed.
0.6
-
-
... More
M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc, laid over and including 15mm thick screed bed in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
44
-
-
... More
M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc, laid over and including 15mm thick screed bed in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
12
-
-
... More
M&L for vitrified ceramic coloured tiles 9 to 10 mm thick (square/ rectangular) of approved shade, area of each tile not exceeding 0.36 Sqm as in floors etc., laid over and including 15mm thick screed bed in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
12
-
-
... More
M&L for glazed ceramic designed coloured tiles in vertical surfaces using size of tiles 450x300x7mm / 350x250x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with colour of tile with and including 10mm thick backing coat in CM (1:3), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
140
-
-
... More
Dismantling floor/ skirting (Terrazzo/ PCC/Ceramic tiles) including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
208
-
-
... More
M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, made of grey cement and pigments, machine pressed as in flooring, set, jointed and pointed in neat cement slurry laid over and including 20mm thick screed bed in CM (1:4) complete all as specified and as directed.
90
-
-
... More
M&L for complete removal of existing treatment on plastered wall surfaces and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed
2000
-
-
... More
M&L for preparation of old brick/ concrete surfaces of walls and cornices by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots etc and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed
4900
-
-
... More
M&L for preparation ol old decorated surfaces of walls and cornices by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efforescent salt and trading oil and greasy spots etc and applying one coat of distemper oil emulsion complete all as specified and directed.
3000
-
-
... More
M&L for preparation of old surfaces of ceilings and cornices by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efforescent salt and trading oil and greasy spots etc and applying one coat of distemper oil emulsion complete all as specified and directed.
500
-
-
... More
M&L for 18 to 20mm thick granite slab (of approved shade), machine cut, as in floors, vertical surfaces, steps (treads/risers) and the like laid over cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and rounding (chamfering) the edges complete all as specified and directed.
6
-
-
... More
Dismantling of wrought iron or mild steel work and structural steel work of any description not otherwise provided for complete
5
-
-
... More
M&L for mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe-410-W (Gde E-250) Quality 'B' complete all as specified and as directed.
300
-
-
... More
M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening etc., conforming to Fe-410-W (Gde E-250) Quality 'A' complete all as specified and as directed.
2000
-
-
... More
M&L for preparation of new steel and iron surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint of first quality over a coat of red oxide zinc chrome primer complete all as specified and as directed.
50
-
-
... More
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc., complete all as specified and as directed.
190
-
-
... More
S&F pre-painted zinc coated aluminium sheet (Galvalume) GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. NOTES: The self tapping screw shall be of adequate length to drive into complete thickness of purlin/rafter etc., and shall be fixed using neoprene and EPDM washers. Penetration and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners etc., as per SSR Part-I 2009 complete.
150
-
-
... More
S&F pre-painted zinc coated aluminium sheet (Galvalume) GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/valley gutters, fixed with self tapping screws including scaffolding for a height upto 12.0 metres complete all as specified and as directed. NOTES: The self tapping screw shall be of adequate length to drive into complete thickness of purlin/rafter etc., and shall be fixed using neoprene and EPDM washers. Penetration and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners etc., as per SSR Part-I 2009 complete.
40
-
-
... More
S&F aluminium flat iron wind ties of any size and thickness fixed with self tapping screws for fixing roofing sheets complete all as specified and as directed. NOTES: The self tapping screw shall be of adequate length to drive into complete thickness of purlin/rafter etc., and shall be fixed using neoprene and EPDM washers.
75
-
-
... More
Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.
20
-
-
... More
M&L for 18mm thick designed rubco hut rubber wood, chemically pressure treated, edge glued, finger jointed/rubber wood boarding panels/beams tongued, grooved fixed over rubber wood frame work with rubber wood runner of size 5x18mm fixed at 600mm c/c using brass screws duly fixed with walls including provision of designed rubber wood beading to top termination of wood boarding and finished with two coats of melamine polish with Asian sealer and wood filler over a coat of honey/natural colour wood filler putty for dust free surface etc., including preparation and applying three types of sand papers and surface finish to a glossy/ mat finish to match with the adjoining surface complete all as specified and as directed.
10
-
-
... More
Supply & fix 18-19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side with balancing white lamination, fixed with screws to timber, steel framework as in shelves or shutters panelling fixed in repairs complete all as specified and as directed.
10
-
-
... More
Dismantling ceiling boards / wall cladding (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets and grid complete all as specified and as directed.
160
-
-
... More
M&L for anodised aluminium snap grid frame work for false ceiling with size of grid 605mm x 605mm all as specified in SSR Part-I 2009, hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat iron 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including cutting, drilling, jointing etc., 4mm thick non-asbestos fibre cement building design boards fixed or laid/ inserted to aluminium frame work with screws complete all as specified and as directed.
120
-
-
... More
M&L for seamless gypsum board false ceiling 12 mm thick including for any sunk or raised moulding with 25mm long self drilling/tapping screws having Philips head with joining compound and 48 mm wide fibre tape to provide seam less finish and including GI frame work of seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flange of 20mm and 30 mm, web of 27 mm, fixed to surrounding wall using nylon sleeves and screws at 450 mm c/c / intermediate channel 0.9 mm thick having two equal flanges of 15 mm suspended from soffit at approx 900 mm c/c with GI cleats and steel expansion fasteners with and including ceiling section (not exceeding 1.2 m length) of 0.55 mm thick having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting across the intermediate channel at 457 mm c/c including hangers 6 mm dia GI adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size, 60 mm long & expansion hold fasteners 12.5 mm dia, 40 mm long and finally applying two coats of oil bound distemper with roller finish over a coat of primer complete all as specified and as directed.
80
-
-
... More
Taking down shutters of any description, area not exceeding 1.0 Sqm each complete all as specified and as directed.
6
-
-
... More
Taking down shutters of any description, area exceeding 1.0 Sqm but not exceeding 2.0 Sqm each and re-fixing in the same opening complete all as specified and as directed.
6
-
-
... More
Taking down chowkhats or frames with shutters (without taking off shutters from the frames), area not exceeding 1.5 Sqm each complete all as specified and as directed.
10
-
-
... More
Taking down chowkhats or frames with shutters (without taking off shutters from the frames), area exceeding 1.5 Sqm but not exceeding 4.0 Sqm each complete all as specified and as directed.
10
-
-
... More
S&F Second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including preservative treatment complete all as specified and as directed.
0.3
-
-
... More
S&F 35mm thick second class hard wood, plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, fixed to chowkats complete all as specified and as directed.
20
-
-
... More
S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), fixed to chowkats complete all as specified and as directed.
20
-
-
... More
M&L for mild steel hold fasts, bands, straps, supports or stays for rainwater, brackets/clamps for eaves/barge boards and valley gutter and similar articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
40
-
-
... More
M&L for powder coated anodised aluminium partition, window and door/ventilator with frame and shutters and grill fully or partly glazed, sliding/openable/fixed fully glazed and panels fixed with panels inserts 12 mm thick pre-laminated particle board/sheet glass including necessary jointing cleats, glazing clips, rubber beading, neoprene packing, anodised aluminium snap beading, screws, anodized aluminium fittings such as handles, aluminium butt hinges, aluminium tower bolts etc. The size of aluminium section shall be all as specified in relevant IS Code and SSR Part-I complete all as specified and as directed.
NOTES:
(i) Supply only floor spring, glass, Imax hinges, SS friction hinges, particle board, aluminium fly proof mesh will be measured and paid separately under relevant items of this BOQ. (ii) Weight of aluminium section only shall be accounted for the purpose of payment. However unit rate quoted shall be deemed to include for cost of rubber beading, neoprene packing, fittings such as handles, butt hinges, tower bolts, rollers for sliding windows, locking arrangement and fixing only of panel inserts of glass/ particle board/aluminium fly proof mesh etc.
(iii) Weight of aluminium handle, butt hinges, tower bolts shall not be accounted for payment purpose.
150
-
-
... More
Supply and fix in repairs stainless steel IMAX Hinges for aluminium window shutter
36
-
-
... More
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.
6
-
-
... More
S&F for 4.0 mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square not exceeding 0.5 Sqm in each panes complete all as specified and directed..
10
-
-
... More
S&F for 4.0 mm thick figured glass, pin head type and glazing with aluminium glazing clips in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.
6
-
-
... More
Supply only aluminium expanded metal fly proof mesh, cut to required size and shape, with 0.45mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed.
10
-
-
... More
Supply and fix in repairs aluminium expanded metal fly proof mesh, cut to required size and shape, with 0.45mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed.
10
-
-
... More
S&F 12mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side with balancing white lamination complete all as specified and as directed.
6
-
-
... More
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube as per specification & drawing, fixed in opening complete all as specified and as directed.
40
-
-
... More
S&F factory made solid PVC moulded door shutter with particle board core, 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded prelaminated PVC sheet on the front face & 2mm plain colour PVC sheet on back face as per specification & drawing fixed to door frame complete all as specified and as directed.
16
-
-
... More
S&F 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21 complete all as specified and as directed.
60
-
-
... More
S&F in repairs 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21 complete all as specified and as directed.
20
-
-
... More
S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
52
-
-
... More
S&F in repairs 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
20
-
-
... More
S&F 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.
52
-
-
... More
S&F in repairs 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.
20
-
-
... More
S&F sliding door bolt, 300mm long, aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.
20
-
-
... More
S&F in repairs sliding door bolt, 300mm long, aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and
sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.
10
-
-
... More
S&F sliding door bolt, 250mm long, aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and
sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.
10
-
-
... More
S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and as directed.
15
-
-
... More
S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm complete all as specified and as directed.
15
-
-
... More
S&F curtain rails, 20mm dia, mild steel, chromium plated with coloured fancy type designed fixing brackets, fixed in repairs complete all as specified and as directed.
20
-
-
... More
S&F door closer, aluminium (extruded section body), hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg, fixed in repairs with screws complete all as specified and as directed.
10
-
-
... More
S&F in repairs 110mm bore PVC (SWR) pipes single socketed, in any length pipes single socketed, in any length with rubber ring joints, laid in trenches/fixed to walls/placed in weep holes using synthetic rubber adhesive cement solvent complete all as specified and as directed.
20
-
-
... More
S&F in repairs 75mm bore PVC (SWR) pipes single socketed, in any length pipes single socketed, in any length with rubber ring joints, laid in trenches/fixed to walls/placed in weep holes using synthetic rubber adhesive cement solvent complete all as specified and as directed.
20
-
-
... More
S&F PVC (SWR) bends any radius, diameter of outlet 110mm complete all as specified and as directed.
6
-
-
... More
S&F PVC (SWR) bends any radius, diameter of outlet 75mm complete all as specified and as directed.
6
-
-
... More
M&L for vitreous China wash hand basin, white, flat back, size 550mm x 400mm including cutting for and pinning in ends of brackets or erecting stand, 32mm dia waste coupling brass chromium plated, bottle trap 32mm bore brass chromium plated with necessary packing union and caps, chain and plug, PVC connections 15mm size with PTMT nuts of length 450mm, screwed down for iron pipe or for unions complete all as specified and as directed.
7
-
-
... More
S&F in repairs 32mm dia waste coupling fitting, brass, chromium plated for basin, with long screw sanks and fly nut, bedded in red lead cement.complete all as specified and directed.
15
-
-
... More
S&F in repairs vitreous china urinal, half stall type coloured, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with 60mm long brass screws, pointing around urinal with cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and as directed
3
-
-
... More
M&L for vitreous China, wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and as directed.
7
-
-
... More
S&F in repairs PVC valveless, syphonic action type, flushing cistern, 10 litre capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.
30
-
-
... More
S&F in repairs flush pipe of polyethylene of low or high density or PVC, 32mm dia for flushing cistern all as specified and as directed
14
-
-
... More
S&F in repairs plastic water closet seat, white, closed pattern with flat bottom, and cover with stainless steel/ PVC/ Aluminium hinging die as required and as specified
33
-
-
... More
S&F in repairs stop valves 15mm dia or bore, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.
20
-
-
... More
S&F in repairs pillar tap, brass, 15mm dia, chromium plated, fancy type with capstan heads, screwed down, high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.
MAKE: PRAYAG Cat part No. PIS-02H or equivalent in PARRYWARE/JAQUAR/JOHNSON
8
-
-
... More
S&F in repairs bib tap, brass, 15mm dia, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and as directed.
MAKE: Jaquar Cat part No. CON-107KN or equivalent in PARRYWARE/ PRAYAG/ JOHNSON
13
-
-
... More
S&F in repairs angular stop cock, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, with long shank and cup (concealed type) screwed down, screwed both ends for iron pipe or for unions complete all as specified and as directed.
MAKE: Jaquar Cat part No. CON-053KN or equivalent in PARRYWARE/ PRAYAG/ JOHNSON
24
-
-
... More
S&F in repairs WHB mixer, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, with long shank with central hole screwed down, screwed both ends for iron pipe or for unions, complete all as specified and as directed.
MAKE: JAQUAR Cat part No. CON-167KNB or equivalent in PARRYWARE/ PRAYAG/ JOHNSON
9
-
-
... More
S&F in repairs tubular towel rail, brass, chromium plated, 20mm dia, D type, 60cm long between flanges, fixed in repairs complete all as specified and as directed.
MAKE: JAQUAR Cat part No. AQN-7711 or equivalent in PARRYWARE/ PRAYAG/ JOHNSON
14
-
-
... More
S&F in repairs toilet paper holder, brass, chromium plated complete all as specified and as directed.
MAKE: JAQUAR Cat part No. CAN-1153N or equivalent in PARRYWARE/ PRAYAG/ JOHNSON
11
-
-
... More
S&F wall mixer, 15mm dia, cast copper alloy, chromiun plated, three way HOT & COLD, heavy duty, fancy type, screwed down for iron pipe or for unions, fixed in repairs complete all as specified and as directed.
MAKE: JAQUAR Cat part No. CON-281KN or equivalent in PRAYAG/PARRYWARE
5
-
-
... More
S&F in repairs health faucet, brass, chromium plated with 8mm dia, 1.0 m long flexible tube, screwed for iron pipe or for brass ferrule 15mm dia or bore complete all as specified and as directed.
MAKE: PRAYAG Cat part No. BEA-41 or equivalent in PARRYWARE/ ZOLOTO/ JOHNSON
32
-
-
... More
S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and as directed.
10
-
-
... More
S&F in repairs stainless steel grating cover 100mm dia fixed with white cement complete all as specified and as directed
10
-
-
... More
S&F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass 6mm thick, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed.
6
-
-
... More
Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.
100
-
-
... More
Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.
80
-
-
... More
M&L for 20mm dia or bore galvanised steel tubing, medium grade, with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed.
30
-
-
... More
M&L for 15mm dia or bore galvanised steel tubing, medium grade, with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed.
30
-
-
... More
S&F 20mm bore CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings, fixed complete to walls, ceilings or in floors etc., (including concealing, if required) and to any type of pipe complete all as specified and as directed.
70
-
-
... More
S&F 25mm bore CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings , fixed complete to walls, ceilings or in floors etc., (including concealing, if required) and to any type of pipe complete all as specified and as directed.
50
-
-
... More
S&F in repairs rotational moulded polyethylene water storage tanks, triple layered, ISI marked (cylindrical vertical with closed top), 500 litres capacity, hoisted and fixed in position all as specified in SSR Part I, 2009 including provision of 40mm/25mm spouts for connecting inlet, outlet, over flow and washout pipes complete all as specified and as directed.
2
-
-
... More
S&F in repairs rotational moulded polyethylene water storage tanks, triple layered, ISI marked (cylindrical vertical with closed top),1000 litres capacity, hoisted and fixed in position all as specified in SSR Part I, 2009 including provision of 40mm/25mm spouts for connecting inlet, outlet, over flow and washout pipes complete all as specified and as directed.
2
-
-
... More
Taking down carefully old unserviceable aluminium/ copper point wiring (light, fan, socket or power) complete, including fittings & fixtures such as switches, ceiling roses, lamp holders, pendants, regulators sockets, light fittings, junction/terminal boxes etc; removing from site and making good disturbed surfaces of walls, floors etc., to match with existing surrounding surfaces complete all as specified and as directed.
134
-
-
... More
Taking down existing unserviceable sub main wiring of any description and making good disturbed surfaces to match with existing surrounding finishes complete all as specified and as directed.
124
-
-
... More
Taking down existing unserviceable main switches/ distribution boards of any description along with MCBs/MCCBs and making good disturbed surfaces to match with existing surrounding finishes complete all as specified and as directed.
12
-
-
... More
Taking down carefully old unserviceable light fittings only and removing from site complete all as specified and as directed.
164
-
-
... More
M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in CI boxes/pressed steel terminal boxes 60mm deep made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint outside and with two coats of aluminium paint inside and laminated sheet cover of 3mm thick on top for housing the switches, socket outlet etc, all as specified and as directed for ONE LIGHT/FAN point controlled by one, one way 6 Amps switch.
46
-
-
... More
M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in CI boxes/pressed steel terminal boxes 60mm deep made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint outside and with two coats of aluminium paint inside and laminated sheet cover of 3mm thick on top for housing the switches, socket outlet etc, all as specified and as directed for ONE 6A SOCKET OUTLET point controlled by one, one way 6 Amps switch on independent board.
11
-
-
... More
M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in CI boxes/pressed steel terminal boxes 60mm deep made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint outside and with two coats of aluminium paint inside and laminated sheet cover of 3mm thick on top for housing the switches, socket outlet etc, all as specified and as directed for ONE 6A SOCKET OUTLET point controlled by one, one way 6 Amps switch on same board.
9
-
-
... More
M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in CI boxes/pressed steel terminal boxes 60mm deep made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint outside and with two coats of aluminium paint inside and laminated sheet cover of 3mm thick on top for housing the switches, socket outlet etc, all as specified and as directed for ONE BELL point controlled by one, one way 6 Amps switch.
3
-
-
... More
M&L for Point wiring complete with 4.0 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 4.0 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in CI boxes/pressed steel terminal boxes 60mm deep made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint outside and with two coats of aluminium paint inside and laminated sheet cover of 3mm thick on top for housing the switches, socket outlet etc, all as specified and as directed for ONE 16A SOCKET OUTLET point controlled by one, one way 16 Amps switch on independent board.
7
-
-
... More
S&F switch piano, flush type, single pole, one way, 6 Amps, 240 volts complete all as specified and as directed.
66
-
-
... More
S&F switch piano, flush type, single pole, one way, 16 Amps, 240 volts complete all as specified and as directed.
7
-
-
... More
S&F socket outlet 2 in 1, 3 pin 6 Amps, flush type, universal all as specified and as directed.
20
-
-
... More
S&F socket outlet 2 in 1, 3 pin 16 Amps, flush type, universal all as specified and as directed.
7
-
-
... More
S&F bell push, flush type, single pole, one way, 6 Amps, 240 volts complete all as specified and as directed.
3
-
-
... More
S&F electric bell, ding dong type, AC, 230 volts complete all as specified and as directed.
3
-
-
... More
M&L for ceiling rose, three terminal, 65x20mm size, PVC/Polycarbonate, insulated body, 6A, 240 volts complete all as specified and as directed.
46
-
-
... More
M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in modular type pressed steel terminal boxes of suitable modules made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint all over and modular cover plates with frames on top for suitable modules on top for housing switches, sockets etc., all as specified and as directed for ONE LIGHT/FAN point controlled by one, one way 6 Amps modular switch.
16
-
-
... More
M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in modular type pressed steel terminal boxes of suitable modules made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint all over and modular cover plates with frames on top for suitable modules on top for housing switches, sockets etc., all as specified and as directed for TWO LIGHT points controlled by one, one way 6 Amps modular switch.
12
-
-
... More
M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in modular type pressed steel terminal boxes of suitable modules made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint all over and modular cover plates with frames on top for suitable modules on top for housing switches, sockets etc., all as specified and as directed for ONE BELL point controlled by one, one way 6 Amps modular switch.
3
-
-
... More
M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in modular type pressed steel terminal boxes of suitable modules made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint all over and modular cover plates with frames on top for suitable modules on top for housing switches, sockets etc., all as specified and as directed for ONE 6A SOCKET OUTLET point controlled by one, one way 6 Amps modular switch on independent board.
11
-
-
... More
M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in modular type pressed steel terminal boxes of suitable modules made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint all over and modular cover plates with frames on top for suitable modules on top for housing switches, sockets etc., all as specified and as directed for ONE 6A SOCKET OUTLET point controlled by one, one way 6 Amps modular switch on same board.
8
-
-
... More
M&L for Point wiring complete with 4.0Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 4 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in modular type pressed steel terminal boxes of suitable modules made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint all over and modular cover plates with frames on top for suitable modules on top for housing switches, sockets etc., all as specified and as directed for ONE 16A SOCKET OUTLET point controlled by one, one way 16 Amps modular switch on independent board.
8
-
-
... More
S&F modular switch, one way, one module, single pole, 6 Amps, 240 Volts AC complete all as specified and as directed. MAKE : ROMA (Anchor)/ Havells (Crabtree) / Legrand.
43
-
-
... More
S&F modular switch, one way, one module, single pole, 16 Amps, 240 Volts AC complete all as specified and as directed. MAKE : ROMA (Anchor)/ Havells (Crabtree) / Legrand.
8
-
-
... More
S&F modular socket, multipurpose, 2/3 pin combined, 2 module, single pole, 6 Amps, 240 Volts AC complete all as specified and as directed.
MAKE : ROMA (Anchor)/ Havells (Crabtree) / Legrand.
23
-
-
... More
S&F modular socket, multipurpose, 2/3 pin, 6/16 Amps combined, 2 module, single pole, 240 Volts AC complete all as specified and as directed.
MAKE : ROMA (Anchor)/ Havells (Crabtree) / Legrand.
8
-
-
... More
S&F modular bell push, one way, one module, single pole, 6 Amps, 240 Volts AC complete all as specified and as directed. MAKE : ROMA (Anchor)/ Havells (Crabtree) / Legrand.
5
-
-
... More
S&F modular electronic fan regulator for ceiling fan, step type, 5 speed, AC, 2 module, 120 watts, 240 volts complete all as specified and as directed. MAKE : ROMA (Anchor)/ Havells (Crabtree) / Legrand.
3
-
-
... More
M&L for Sub main wiring complete with two runs (1P+1N) of 6.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 6.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 32mm wide rigid non-metallic PVC casing and capping and its accessories (OR) 25mm dia PVC conduit and conduit accessories fixed on surface of wall/ceiling/roof/ floor complete all as specified and as directed.
NOTE: Two runs of 6.0 Sqm copper conductor, One run of 6.0 Sqmm copper conductor as earth wire and one run of PVC casing and capping / PVC conduit shall be measured as one unit length.
42
-
-
... More
M&L for Sub main wiring complete with two runs (1P+1N) of 4.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 4.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 32mm wide rigid non-metallic PVC casing and capping and its accessories (OR) 25mm dia PVC conduit and conduit accessories fixed on surface of wall/ceiling/roof/ floor complete all as specified and as directed.
NOTE: Two runs of 4.0 Sqm copper conductor, One run of 4.0 Sqmm copper conductor as earth wire and one run of PVC casing and capping / PVC conduit shall be measured as one unit length.
41
-
-
... More
M&L for Sub main wiring complete with two runs (1P+1N) of 2.5 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 2.5 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 32mm wide rigid non-metallic PVC casing and capping and its accessories (OR) 25mm dia PVC conduit and conduit accessories fixed on surface of wall/ceiling/roof/ floor complete all as specified and as directed.
NOTE: Two runs of 2.5 Sqm copper conductor, One run of 2.5 Sqmm copper conductor as earth wire and one run of PVC casing and capping / PVC conduit shall be measured as one unit length.
41
-
-
... More
Taking down carefully ceiling fan of any sweep from ceiling hook at any height after disconnecting from electricity, dismantling blades, opening up for carrying out servicing/over hauling, examining for damaged worn out parts like shaft, ball bearings etc., and applying grease to bearings, assembling back, preparing painted surfaces by cleaning dust, grease etc., and by filling cavities with filler to receive spray paint using synthetic enamel paint of existing shade and writing MES No. in synthetic enamel paint, fixing up blades and hanging back in position and providing and connecting up with 1.0 Sqmm twin core twisted flexible copper conductor of suitable length from connector of fan to ceiling rose and testing complete all as specified and as directed.
NOTE: Spare parts like ball bearings, shafts, fan blades, copper winding shall be replaced only if found damaged and certified by Engineer-in-charge. If spares are replaced, they shall be measured and paid separately as SUPPLY ONLY. A book shall be maintained for record of servicing and replacement of spares with MES Nos. of fans.
11
-
-
... More
Taking down carefully exhaust fan of any sweep from its position at any height after disconnecting from electricity, dismantling blades, opening up for carrying out servicing/over hauling, examining for damaged worn out parts like shaft, ball bearings etc., and applying grease to bearings, assembling back, preparing painted surfaces by cleaning dust, grease etc., and by filling cavities with filler to receive spray paint using synthetic enamel paint of existing shade and writing MES No. in synthetic enamel paint, fixing up blades and fixing back in position and providing and connecting up with 1.0 Sqmm twin core twisted flexible copper conductor of suitable length from connector of fan to ceiling rose and testing complete all as specified and as directed.
NOTE: Spare parts like ball bearings, shafts, fan blades, copper winding shall be replaced only if found damaged and certified by Engineer-in-charge. If spares are replaced, they shall be measured and paid separately as SUPPLY ONLY. A book shall be maintained for record of servicing and replacement of spares with MES Nos. of fans.
3
-
-
... More
Taking down carefully wall mounting fans of any sweep from its position at any height after disconnecting from electricity, dismantling blades, opening up for carrying out servicing/over hauling, examining for damaged worn out parts like shaft, ball bearings etc., and applying grease to bearings, assembling back, preparing painted surfaces by cleaning dust, grease etc., and by filling cavities with filler to receive spray paint using synthetic enamel paint of existing shade and writing MES No. in synthetic enamel paint, fixing up blades and fixing back in position and providing and connecting up with 1.0 Sqmm twin core twisted flexible copper conductor of suitable length from connector of fan to ceiling rose and testing complete all as specified and as directed.
NOTE: Spare parts like ball bearings, shafts, fan blades, copper winding shall be replaced only if found damaged and certified by Engineer-in-charge. If spares are replaced, they shall be measured and paid separately as SUPPLY ONLY. A book shall be maintained for record of servicing and replacement of spares with MES Nos. of fans.
3
-
-
... More
Rewinding of ceiling fan (any sweep) stator by super enamelled copper winding wire of suitable gauge and size with Garware insulating paper, insulating varnish and oven drying for requisite insulation values including necessary PVC sleeves. lead wires and testing after assembling in position in ceiling fan complete all as specified and as directed.
3
-
-
... More
Rewinding of exhaust fan by super enamelled copper winding wire of suitable gauge and size with Garware insulating paper, insulating varnish and oven drying for requisite insulation values including necessary PVC sleeves. lead wires and testing after assembling in position in exhaust fan complete all as specified and as directed.
3
-
-
... More
Rewinding of wall mounted fan by super enamelled copper winding wire of suitable gauge and size with Garware insulating paper, insulating varnish and oven drying for requisite insulation values including necessary PVC sleeves. lead wires and testing after assembling in position in exhaust fan complete all as specified and as directed.
3
-
-
... More
S&F sealed ball bearing suitable for ceiling fan with bearing No. 6201/6202 complete all as specified and as directed.
3
-
-
... More
S&F shaft suitable for ceiling fan 1200mm/1400mm sweep complete all as specified and as directed.
3
-
-
... More
S&F in repairs of fan blades for ceiling 1200mm/1400mm sweep indicating all accessories complete all as specified and directed.
3
-
-
... More
S&F capacitor 2.5mfd, 230 Volts for ceiling fans including taking out old unserviceable one complete all as specified and as directed.
MAKE: CAPCO/UNIVERSAL/TIBCON/EPCOS
30
-
-
... More
S&F exhaust fan blade set of 150/250/300/380mm sweep complete all as specified and as directed.
3
-
-
... More
S&F wall mounted fan blade set of 300/400mm sweep complete all as specified and as directed.
3
-
-
... More
Taking down carefully electric geysers of any make, type and capacity after disconnecting of electrical and water connections, opening of bottom cover, checking of all parts and taking out copper tank, checking of its leakage and removing the dust, brazing the leakage and painting of geysers with two coats of synthetic enamel paint, replacement of burnt out spares and assembling the geyser and re-fixing back in its original position complete all as specified and as directed.
NOTE: Spares shall be measured and paid separately under relevant items as SUPPLY ONLY.
3
-
-
... More
SUPPLY ONLY heating element 1500 watts.
3
-
-
... More
SUPPLY ONLY thermostat switch.
3
-
-
... More
SUPPLY ONLY pressure release valve.
3
-
-
... More
SUPPLY ONLY thermal cut out.
3
-
-
... More
SUPPLY ONLY indicator lamp RED/GREEN colour.
3
-
-
... More
SUPPLY ONLY PVC connection 15mm size with PTMT nuts of length 600mm.
MAKE: PRAYAG/ POLYTUFF
3
-
-
... More
S&F Starter switch of capacity 25 Amps, working on 240 volts, AC supply, suitable for air conditioner complete all as specified and as directed. MAKE: Crabtree Cat part No. ACVSMXW251 or equivalent in ANCHOR/ L&T/ HAVELLS
5
-
-
... More
S&F MCCB DB sheet steel enclosure, VTPN, 4-way, double door, 415 Volts with 200 Amps rated bus bar, IP-43 protection suitable for incoming MCCB 160/200 Amps and outgoing MCB TP/SP triple pole and neutral, enclosed in standard steel sheet flush mounting type, factory fabricated and including taking down old unserviceable DB of any type/rating and making goo to the distrubed surface / walls complete all as specified and as directed.
MAKE: L&T/ LEGRAND/ INDO ASIAN/ HAVELLS
3
-
-
... More
S&F MCB DB, TPN, 4-way, vertical type, double door, 415 Volts with 200 Amps rated bus bar, IP-43 protection, shrouded neutral bus bar, cement spill protector, concealed in wall and making good disturbed surfaces to match with surrounding surface complete all as specified and as directed.
MAKE: INDO ASIAN Cat part No. 811870 or equivalent in L&T/ LEGRAND/ HAVELLS
1
-
-
... More
S&F MCB DB, SPN, 12-way, vertical type, double door, 240 Volts with 200 Amps rated bus bar, IP-54 protection, shrouded neutral bus bar, cement spill protector, concealed in wall and making good disturbed surfaces to match with surrounding surface complete all as specified and as directed.
MAKE: INDO ASIAN / L&T/ LEGRAND/ HAVELLS
3
-
-
... More
S&F MCB DB, SPN, 8-way, vertical type, double door, 240 Volts with 200 Amps rated bus bar, IP-54 protection, shrouded neutral bus bar, cement spill protector, concealed in wall and making good disturbed surfaces to match with surrounding surface complete all as specified and as directed.
MAKE: INDO ASIAN /L&T/ LEGRAND/ HAVELLS
3
-
-
... More
S&F MCB DB, SPN, 4-way, vertical type, double door, 240 Volts, 50 Hz with 200 Amps rated bus bar, IP-54 protection, shrouded neutral bus bar, cement spill protector, concealed in wall and making good disturbed surfaces to match with surrounding surface complete all as specified and as directed.
MAKE: INDO ASIAN / L&T/ LEGRAND/ HAVELLS
3
-
-
... More
S&F MCCB, 4 pole, 100 Amps, 50Hz, 25KA rupturing capacity, 415 Volts adjustable type with thermal and magnetic release complete all as specified and as directed.
MAKE: INDO ASIAN/ L&T/ LEGRAND/ HAVELLS
3
-
-
... More
S&F MCB, TPN, "C" series, 230 volts, 63 Amps, 10 KA rupturing capacity complete all as specified and as directed. MAKE: INDO ASIAN /L&T/ LEGRAND/ ABB/ HAVELLS
3
-
-
... More
S&F MCB, DP, "C" series, 230 volts, 40 Amps, 10 KA rupturing capacity complete all as specified and as directed. MAKE: INDO ASIAN /L&T/ LEGRAND/ ABB/ HAVELLS
7
-
-
... More
S&F MCB, SP, "C" series, 240 volts, 6 to 32 Amps, 10 KA rupturing capacity complete all as specified and as directed. MAKE: INDO ASIAN /L&T/ LEGRAND/ ABB/ HAVELLS
41
-
-
... More
S&F 18 Watts, 220 Volts surface mounted LED ceiling light fitting of size 234mm x 234mm x 25mm with high performance LED, slim round panel, made from die-cast aluminium and CRCA covering, powder coated in white colour. high efficiency PMMA diffuser complete all as specified and directed.
MAKE: PHILIPS, Model: Star Surface/ CROMPTON Model No: LCDSPLN-R-18-CDL or equivalent in HAVELLS/ BAJAJ/ LUKER
NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting
9
-
-
... More
S&F 18 Watts, 220 Volts recess mounting LED ceiling light fitting, 178mm size round/square shaped, made from die-cast aluminium and CRCA covering, powder coated in white colour suitable for armstrong/grid ceiling complete with separate electronic driver complete all as specified and directed.. MAKE: PHILIPS, Model: Astra Max Metal Panel/ CROMPTON (Cat Part No : CDR-206-18-57-SL-NWH) or equivalent in HAVELLS/ LUKER
NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting
16
-
-
... More
S&F 15 Watts, 220 Volts recess mounting LED ceiling light fitting, 159mm size round/square shaped, made from die-cast aluminium and CRCA covering, powder coated in white colour suitable for armstrong/grid ceiling complete with separate electronic driver complete all as specified and directed.. MAKE: PHILIPS, Model: Astra Max Metal Pane/ CROMPTON (Cat Part No : CDR-205-15-57-SL-NWH) or equivalent in HAVELLS/ BAJAJ/ LUKER
NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting
12
-
-
... More
S&F 12 Watts, 220 Volts recess mounting LED ceiling light fitting, size round/square shaped, made from die-cast aluminium and CRCA covering, powder coated in white colour suitable for armstrong/grid ceiling complete with separate electronic driver complete all as specified and directed.. MAKE: PHILIPS, Model: Astra Max Metal Panel/ CG Cat Part No: CDR-205-12-57-SL-NWH or equivalent in HAVELLS/ LUKER NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting
10
-
-
... More
S&F of LED tube light fittings with 20 watts linght source in integral module with polycarbonate / Acrylic diffuser more than 85% efficiency of light with LED lamp efficacy as 110 Lum/W THD 15% with operating voltage range 150-300V, 50HZ with driver efficiency 85% surge voltage withstand 2.5KV power factor0.9 energy efficient fitting surface mounted including connecting up with two/ three core cable complete all as specified and directed.
Make : Luker / Havells/Philips/ Crompton.
NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting
46
-
-
... More
S&F LED light fittings of capacity of 10 watts with aluminium extruded channel finished in anodised, Class I power factor 0.9 pre wired with electronic driver high translucent frosted PMMA diffuser for glare free smooth lighting distribution surface mounted complete all as specified and directed.
Make : Luker (Cat Part No : LT510P) / CG (Cat Part No : CCL 102-10-65 SL-DP-NWH-2ft)/ Philips (Cat Part No : Astra Line 2ft) or equivalent make of Havells
8
-
-
... More
S&F Wall mounting decorative fixtures made up of metal & glass suitable for 9 Watts LED bulb with and including bulb complete all as specified and as directed.
MAKE: PHILIPS Model: 34302 or equivalent in HAVELLS/ CROMPTON GREAVES
8
-
-
... More
S&F 25 Watts LED security light fitting with aesthetically designed COB LED ensure efficient optics and uniform distribution of light, for street light application. Pressure die cast aluminium housing powder coated in graphite grey and toughened glass of IP 65, including necessary fixing arrangements as per site requirements class-1 of model : Freedom of make CG complete all as specified and as directed.
MAKE: LUker (Cat Part No : LST-24)/ Philips/ C&S/CG/ Havells
5
-
-
... More
S&F 30 Watts LED light, recess mounting luminaire with glare free uniform illumination having longer life and less maintenance, size 600mmx600mm, 25000 burning hours including all accessories and fixing arrangements for fixing the light fitting complete all as specified and as directed. MAKE: PHILIPS Cat part No. RC380BLED30S-6500-G5 L3W 12 PSU OD/ CROMPTON GREAVES Cat Part LCTLRNE-30-F0-CDL or equivalent in HAVELLS/C&S
5
-
-
... More
S&F 9 Watts holder type LED lamp 230 Volts, 50Hz complete all as specified and as directed.
MAKE: PHILIPS / C&S/ HAVELLS/ CROMPTON GREAVES
15
-
-
... More
S&F 7 Watts retrofit holder type LED lamp 230 Volts, 50Hz complete all as specified and as directed.
MAKE: PHILIPS /C&S/ HAVELLS/ CROMPTON GREAVES
20
-
-
... More
Supply only electronic drivers for 10 to 24 watt LED post top luminaire / LED light fittings operated at input AC voltage 85 to 265 Volts, 50Hz, output DC voltage 42 to 65 Volts, 300MA, P.F 0.95 complete all as specified and as directed.
MAKE: PHILIPS/ CG/ HAVELLS / LUKER
13
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements