Military Engineer Services Tender

M & L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome paint complete all as specified and as directed.

M & L for post holes in RCC beam / Column / Chajja / parapet walls etc for fixing of grill-grating in size of hole 100 mm x 100 mm x 250 mm and fill the hole with Smart Care RCC concrete complete all as specified and as directed.

M & L for rendering 10 mm thick in cement plaster (1:4) on fair faces of concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

M & L for preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion over one coat of chalk whitnenig primer complete all as specified and as directed.

M & L for preparation of old decorative surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

M & L for preparation of old surfaces of wall and applying one coat of exterior weather proof paint of any shade complete all as specified and as directed.

M & L for preparation of old decorative surfaces of wall and applying one coat of oil bound distempering complete all as specified and as directed.

E/M PORTION Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth and getting out in hard/ dense soil for foundation of poles, structures, stay rods, laying of underground cables etc complete all as specified and as directed.

Returning, filling in soils including spreading, levelling, watering and well ramming in layers each n.exc 25cm thick complete all as specified and as directed.

Removing excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

Supply and laying GI tubing 50mm dia light grade for cable protection at road crossing/ on poles and for stand post to hold post top lantern complete all as specified and as directed.

S & F Bollard light 8W (1.0m) new generation, IP 65 LED Bollard, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source, opal cover offers soothing uniform illumination for different applications complete all as specified and as directed.

S & F Flood light 70W LED, new generation, IP 65 LED flood, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source, opal cover offers soothing uniform illumination for different applications complete all as specified and as directed.

Supply, testing, laying and commissioning of XLPE insulated, armoured (heavy duty) electric cable with aluminium stranded conductor, 1100 volts grade, 4 core 16 Sqmm laid in trenches/ duct/ fixed to wall with suitable size clamps/ passing through pipe/ tunnel/ under ground/ surface upto the termination point and cable end terminations crimped with suitable size cable lugs, cable glands with tool, nuts, bolts etc and connecting end terminations to DBs/ LT panel/ busbar etc complete all as specified and as directed by Engr-in-Charge. Make : Gloster/ Havells/ Polycab

Supply, install, testing and commissioning weather and vermin proof outdoor type feeder panel box factory fabricated indoor cubicle/ kiosk type totally enclosed IP54 made out of 3.15mm thick CRCA sheet metal enclosure of suitable size, with angle iron frame of MS angle 50 x 50 x 6mm suitable for operation on 3 phase 4 wire, 440 volts 50 Hz system, with hinged panel doors (covers) on two sides with handles handles, bottom gland plate and locking arrangement consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/ rubber/ wooden bushes to prevent ingress of water/ vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly spray painted grey hammer tone with one coat of red oxide primer and two coats of synthetic enamel paint of gray or any other approved colour, including connecting with LT armoured incoming and outgoing cables and including required sizes of cable lugs of aluminium complete all as specified and directed and consisting of the following:-

(a) Copper bus bar 200 Amps for 3 phase & neutral (b) MCB TPN 63 Amps 10 KA 415V C curve - 02 Nos as (01 No as outgoing & 01 No as spare) (c) MCCB 4 pole 125 Amps 16 KA 415 Volts - 01 No as outgoing

M & L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) for coping/ foundation of PCC for poles complete all as specified and as directed.

M & L for submain wiring with single core PVC insulated FRLS multistranded copper conductor cable of size 2 x 2.5 Sqmm drawn into and including rigid non metallic PVC conduit, medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings and fixing accessories and 2.5 Sqmm FRLS multistranded copper conductor cable as continuous earth wire from PVC sintex box to post top fittings complete all as specified and as directed by Engr-in-Charge. Make of wire : Polycab/ Havells/ Finolex Make of conduit and its accessories : Modi/ Anchor/ Precision/ Pressfit/ Astral/ Polycab Note : (i) 3 Runs of 2.5 Sqmm cable shall be measured as one unit length. (ii) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth.