Military Engineer Services Tender
... More
To inquire about any e-tender the Andaman & Nicobar Islands government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder one can find every eprocurement Punjab tender on BidAssist. BidAassist has collated each and every Eproc Andaman & Nicobar Island Tender on its website. Looking for Andaman & Nicobar Island tenders online or going through the cumbersome government websites for it, has been made easier with the help of BidAssist.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date7 Feb 2025
Closing Date14 Mar 2025
Tender Amount₹ 4,40,00,000
Costs
EMD
₹ 5,15,000Document Cost
₹ 2,000Tender Fee
Refer Documents
Summary
80824 Augmentation Of Outfitting And Fabrication Shop At Nsry (svp)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_696898_1Tender No
80824 Augmentation of Outfitting and Fabrication ShopTender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Lump sum price worked out by the tenderer for "Internal Electrification" as listed in Schedule ‘A’ Part-III
1
236350
-
... More
Lump sum price worked out by the tenderer for "External Electrification" as listed in Schedule ‘A’ Part-IV
1
2488501
-
... More
Lump sum price worked out by the tenderer for "External Water Supply" as listed in Schedule ‘A’ Part-V
1
16470
-
... More
Lump sum price worked out by the tenderer for "Area Drainage" as listed in Schedule ‘A’ Part-VI
1
586639
-
... More
Lump sum price worked out by the tenderer for "Retaining Wall" as listed in Schedule ‘A’ Part-VII
1
228033
-
... More
Lump sum price worked out by the tenderer for "Road/ Hardstanding/Path" as listed in Schedule ‘A’ Part-VIII
1
4897892
-
... More
Lump sum price worked out by the tenderer for "Lightening Protection" as listed in Schedule ‘A’ Part-IX
1
16627
-
... More
Lump sum price worked out by the tenderer for "Addition/Alteration" as listed in Schedule ‘A’ Part-X
1
1534874
-
... More
Lump sum price worked out by the tenderer for "Demolition/Dismantling" as listed in Schedule ‘A’ Part-XI
1
761336
-
... More
Lump sum price worked out by the tenderer for "Pile Foundation" as listed in Schedule ‘A’ Part-XII
1
41123
-
... More
Subtotal
-
-
-
... More
NOTE: Schedule ‘A’ Part - XIII is not prepriced by MES and prepriced rate indicated as 0.00 under Col.5 signifies this fact only. Bidder shall insert their rates in Green colour filled under Col-6.
-
-
-
... More
SCHEDULE `A' PART - XIII (MISC ITEMS)
-
-
-
... More
Internal Electrification
-
-
-
... More
S&F DB sheet metal enclosure (IP-63) protection TPN-415 Volts 4 way with 200 Amp rated bus bar of suitable size and common neutral link in all enclosed in standard steel flush mounting type factory fabricated complete with out MCCB and necessary blanking plate for unused way complete all as specified and directed.
1
-
-
... More
S&F MCB SPN 32 Amps "C" series 230 volts
2
-
-
... More
S&F MCB SPN 63 Amps "C" series 230 volts
6
-
-
... More
S&F MCB SP 06 to 32 Amps "C" series 230 volts
44
-
-
... More
S&F ceiling fan 1200mm sweep, 5 star rateing suitable for operation on 230/240V, 50Hz, single phase, AC supply complete including connecting upwith 3 core flexible cord of size 1.5 Sq.mm from ceiling rose to fan all as specified and directed
26
-
-
... More
S&F heavy duty Exhaust fan 450mm sweep with louver single phase 230V including making holes of suitable size in wall and fixed with nut bolts as required and making good dismantle surface of wall complete all as specified and directed
10
-
-
... More
S&F surface and wall mounted 20 watt LED batten, extruded aluminimum housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver including rod/tube and connection from ceiling rose to connector complete with all accessories internally prewired and including connecting up with twing core twisted flexible wire size 23/0.0076 copper conductor cable with suitable size all as specified & directed by Engineer-in-Charge.
Make:- Havells/Crompton/Philips/Luker USA
62
-
-
... More
Fabrication and installation of stand alone sheet metal enclouser made out of CRCA sheet 2mm thickness of suitable size along with angle iron base of 1.2 mtr length of size 30x30x6mm thickness including fixing MCCB of following capacities MCCB 3 Pole 32 Amps 415 Volts with rupturing capacity 10KA
19
-
-
... More
Fabrication and installation of stand alone sheet metal made enclosureout of CRCA sheet 2mm thickness of suitable size along with angle iron base of 1.2 mtr length of size 30x30x6mm thickness including fixing MCCB of following capacities. MCCB 3 Pole 40 Amps 415 Volts with rupturing capacity 10KA
5
-
-
... More
Fabrication and installation of stand alone sheet metal enclosure made out of CRCA sheet 2mm thickness of suitable size along with angle iron base of 1.2 mtr length of size 30x30x6mm thickness including fixing MCCB of following capacities. MCCB 3 Pole 63 Amps 415 Volts with rupturing capacity 25KA
6
-
-
... More
Fabrication and installation of stand alone sheet metal enclosure made out of CRCA sheet 2mm thickness of suitable size along with angle iron base of 1.2 mtr length of size 30x30x6mm thickness including fixing MCCB of following capacities. MCCB 3 Pole 100 Amps 415 Volts with rupturing capacity 25KA
2
-
-
... More
Fabrication and installation of stand alone sheet metal enclosure made out of CRCA sheet 2mm thickness of suitable size along with angle iron base of 1.2 mtr length of size 30x30x6mm thickness including fixing MCCB of following capacities. MCCB 3 Pole 160 Amps 415 Volts with rupturing capacity 36KA
1
-
-
... More
Fabrication and installation of stand alone sheet metal enclosure made out of CRCA sheet 2mm thickness of suitable size along with angle iron base of 1.2 mtr length of size 30x30x6mm thickness including fixing MCCB of following capacities. MCCB 3 Pole 250 Amps 415 Volts with rupturing capacity 36KA
1
-
-
... More
Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level with the top edge of electrode not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4mm dia means of bolts, nuts, check nuts and washers of galvanised iron and GI lead protected with protection pipe of GI light grade 15mm dia upto 3mtr at top of poles and watering pipe 20mm bore of GI medium grade all as shown in electrical plate No.3 of SSR Part-I 2009 connected to earthing test point all as specified and direct and testing on completion including PCC 1:3:6 C-I cover and frame excavation and earth work etc complete all as specified in electric plat No.3 of SSR Part-I 2009. Note:- PCC chamber shall be constructed at least 1.50mtr away from on the earth pit electrode and pipe for watering shall be grovided in slanting manner.
2
-
-
... More
External Water Supply
-
-
-
... More
Cutting cast iron pipes/GI pipes of size 50mm/25mm dia insertion of 'T's of size 50x50x25mm and branches including necessary earth work and other connected work all as specified.
1
-
-
... More
External Electrification
-
-
-
... More
Design, manufacture, supply, installation, testing and commissioning of 11 KV / 0.433 KV, 315 KVA OEM factory manufactured, factory tested ready to install and connections type Compact Substation with an outdoor enclosure, equipped with 315 KVA Dry type Cast Resin Transformer as per IS 2026 (Part-11)/IS:11171, 1 way, 11 KV Manual Ring Main Unit (SF6 Gas Insulated Switchgear) consisting of 01 No 630 A 11 KV Fixed Manual SF6 GAs Insulated Vacuum Circuit Breaker with HT cable interconnection in between Transformer and RMU and suitable sized Busbar between Transformer and LV Incoming Main Switchgear - MCCB for full load output current of the transformer and Internal earthing connections by GI strips all as a single transport unit complete all as specified as detailed below.
1
-
-
... More
Item 28 Contd.../-
[a] Enclosure: Outdoor type Galvanised enclosure or CRCA sheet painting with two coats of epoxy powder paint over a coat of primer having modular construction with 2 mm thick Galvanised Sheet or CRCA sheet in Corrugated/Louvered design type wall design for better heat dissipation and providing robust construction. The degree of protection for HT & LT switchgear compartment shall be IP54 & degree of protection of transformer compartment of the enclosure shall be minimum IP34. Each compartment shall be provided with door and pad locking arrangement. The Compact substation shall be provided with lifting beams and hooks for easy installation at site and it shall be possible to transport the equipment along with Transformer, RMU & LT panel from one site to another.
-
-
-
... More
Item 28 Contd.../-
[b] HT Section:
RMU Non extensible 1 way, 11 KV, 1 SF6 circuit breaker along with connected accessories.
Type: Free standing, metal clad, SF6 insulated ring master with 01 No Direct cable module & 01 No 630 Amp Fixed Manual SF6 circuit breaker.
(a) Self powered relay, type IDMT
(b) Ring switches and T OFF SF6 circuit breaker with integrated Earthing switches
(c) Live cable indictor for Ring switches
(d) Pad locking facility
(e) Shunt trip coil rating - 230 V
Current Transformer - Cast Resin Ratio: 50/1A, Core1: Cl. 0.5, 5 VA
Core2: Cl. 0.5P10, 15 VA
Protection:
Numerical 2 OC + 1 EF Relay
Micro processor based Non- Directional IDMT
Indication lamps:
VCB off / on / auto trip/ Trip circuit healthy / spring charge indication
Metering:
Digital Ammeter
-
-
-
... More
Item 28 Contd.../-
[c] Transformer Section:-
315 KVA , 11/0.433 KV, copper wound Dry type cast Resin Step Down Transformer having 5 Position Off circuit Tap links +5% in steps of 2.5% each with all standard fittings & accessories including Digital Type WTI with Alarm & trip contacts & RTD Sensors as per IS-2026 (Part-11)/IS:11171.
Total losses@ 50% Load - 2.0 KW
Total losses@ 100% Load - 5.04 KW
[d] LT Section:- LT Panel comprising of LV side Incomer - 01 No 500 Amp 4 pole 50 KA MCCB with thermal magnetic based release with O/L & S/C protection along with RYB indication, Voltmeter, Ammeter with 500/5A CT's Cl 1.0
[e] Space heater with ON/OFF switch and thermostat, single phase switch with socket, LT cubical illumination lamp with Door limit switch and MCBs for AC/DC control.
[f] Compact substation shall be outdoor plinth mounted type. The rate quoted is deemed to including the cost of erection, commissioning of Compact Substation and civil work such as construction of foundation of required size including trench for the cabling work etc. complete in all respect as per OEM design and recommendation.
[g] Compact substation shall be complete with the internal interconnections & Earthing (GI) and extending of earth bar of Neutral and body terminals to the frame of the compact substation for connecting to the earth pits.
-
-
-
... More
Item 28 Contd.../-
[h] Technical data sheet of the Transformer, HV/LV switchgear, relay etc., shall be submitted for approval before placing the supply order.
[j] The contractor shall submit GA drawings of CSS for approval of Accepting Office before placing order.
(k) Pre-commissioning test by AEI/ ESO or any testing officer as nominated by HQ CE (A&N) Zone through Accepting Officer after installation of CSS.
-
-
-
... More
Supply, installation , testing and commissioning outdoor LT Distribution Panel suitable for 3 phase, 4 wire, 415 volts 50 Hz supply system with suitable size and powder coating provided with suitable to make it dust/vermin proof. The panel should be CPRI approved shall be made with 3.15 mm thick CRCA sheet for outer shell and inner shell made out of 2 mm thick CRCA sheet, double door with front and back openable with locking arrangement, provision of threaded earthing stud at bottom, inner shell completely vermin proof and to accomodate incoming/outgoing MCCB, MCBs and TPN aluminium busbar 900 Amps and extension links of rating not less than 1.5 times the rated capacity of respective MCCBs. The TPN busbar and extension link shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on epoxy resin insulator. All control wires shall be with 2.5 sqmm multistranded copper conductor wire and shall be properly bunched , tied ferruled for proper identification and crimped with adequate size of lugs. The panel shall be mounted on 50x50x5mm angle iron stand of height 45cm above ground level and 45 cm embedded in ground, computer cut self adhesive vinyl danger notice plate having conventional symbol of bone and skull be provided. The panel shall be consist of following accesories:-
1
-
-
... More
Item 29 Contd…./-
(a) On load change over switch 630 A 415 V - 01 No (Incoming)
(b) MCCB 4 Pole 500 Amp 50 Hz 415 V with rupturing capacity 50 KA, Ics=100% Icu and adjustable thermal and magnetic setting (Incoming) - 01 No
(c ) MCCB 4 Pole 400 Amp 50 Hz 415 V with rupturing capacity 36 KA, Ics=100% Icu and adjustable thermal and magnetic setting - 01 No (For P-2)
(d) MCCB 4 Pole 315 Amp 50 Hz 415 V with rupturing capacity 36 KA, Ics=100% Icu and adjustable thermal and magnetic setting - 01 No (For P-3)
(e) MCCB 4 Pole 250 Amp 50 Hz 415 V with rupturing capacity 36 KA, Ics=100% Icu and adjustable thermal and magnetic setting - 01 No (For P-4)
(f) MCCB 4 Pole 100 Amp 50 Hz 415 V with rupturing capacity 16 KA, Ics=100% Icu and adjustable thermal setting and fixed magnetic setting - 02 Nos (For P-1, spare)
(g) Digital Voltmeter - 01 No
(h) Digital Ammeter - 01 No
(j) Indicating lamps R,Y,B - 01 set
-
-
-
... More
Supply, installation , testing and commissioning indoor LT Distribution Panel suitable for 3 phase, 4 wire, 415 volts 50 Hz supply system with suitable size and powder coating provided with suitable to make it dust/vermin proof. The panel should be CPRI approved shall be made with 2 mm thick CRCA sheet for outer shell and inner shell, double door with front and back openable with locking arrangement, provision of threaded earthing stud at bottom, inner shell completely vermin proof and to accomodate incoming/outgoing MCCB, MCBs and TPN aluminium busbar 600 Amps and extension links of rating not less than 1.5 times the rated capacity of respective MCCBs. The TPN busbar and extension link shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on epoxy resin insulator. All control wires shall be with 2.5 sqmm multistranded copper conductor wire and shall be properly bunched , tied ferruled for proper identification and crimped with adequate size of lugs. The panel shall be mounted on 50x50x5mm angle iron stand of height 45cm above ground level and 45 cm embedded in ground, computer cut self adhesive vinyl danger notice plate having conventional symbol of bone and skull be provided. The panel shall be consist of following accesories:-
1
-
-
... More
Item 30 Contd..../-
(a) MCCB 4 Pole 400 Amp 50 Hz 415 V with rupturing capacity 36 KA, Ics=100% Icu and adjustable thermal and magnetic setting - 01 No (Incoming)
(b) MCCB 3 Pole 250 Amp 50 Hz 415 V with rupturing capacity 36 KA, Ics=100% Icu and adjustable thermal and magnetic setting - 01 No (c) MCCB 3 Pole 160 Amp 50 Hz 415 V with rupturing capacity 25 KA, Ics=100% Icu and adjustable thermal and magnetic setting - 01 No (d) MCCB 3 Pole 63 Amp 50 Hz 415 V with rupturing capacity 16 KA, Ics=100% Icu and adjustable thermal setting and fixed magnetic setting - 05 Nos
(e) Digital Voltmeter - 01 No
(f) Digital Ammeter - 01 No
(g) Indicating lamps R,Y,B - 01 set
-
-
-
... More
Supply, installation , testing and commissioning indoor LT Distribution Panel suitable for 3 phase, 4 wire, 415 volts 50 Hz supply system with suitable size and powder coating provided with suitable to make it dust/vermin proof. The panel should be CPRI approved shall be made with 2 mm thick CRCA sheet for outer shell and inner shell, double door with front and back openable with locking arrangement, provision of threaded earthing stud at bottom, inner shell completely vermin proof and to accomodate incoming/outgoing MCCB, MCBs and TPN aluminium busbar 500 Amps and extension links of rating not less than 1.5 times the rated capacity of respective MCCBs. The TPN busbar and extension link shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on epoxy resin insulator. All control wires shall be with 2.5 sqmm multistranded copper conductor wire and shall be properly bunched , tied ferruled for proper identification and crimped with adequate size of lugs. The panel shall be mounted on 50x50x5mm angle iron stand of height 45cm above ground level and 45 cm embedded in ground, computer cut self adhesive vinyl danger notice plate having conventional symbol of bone and skull be provided. The panel shall be consist of following accesories:-
1
-
-
... More
Item 31 Contd.../-
(a) MCCB 4 Pole 315 Amp 50 Hz 415 V with rupturing capacity 36 KA, Ics=100% Icu and adjustable thermal and magnetic setting - 01 No (Incoming)
(b) MCCB 3 Pole 100 Amp 50 Hz 415 V with rupturing capacity 16 KA, Ics=100% Icu and adjustable thermal setting and fixed magnetic setting - 02 Nos (c) MCCB 3 Pole 63 Amp 50 Hz 415 V with rupturing capacity 16 KA, Ics=100% Icu and adjustable thermal setting and fixed magnetic setting - 08 Nos
(d) Digital Voltmeter - 01 No
(e) Digital Ammeter - 01 No
(f) Indicating lamps R,Y,B - 01 set
-
-
-
... More
Supply, installation , testing and commissioning indoor LT Distribution Panel suitable for 3 phase, 4 wire, 415 volts 50 Hz supply system with suitable size and powder coating provided with suitable to make it dust/vermin proof. The panel should be CPRI approved shall be made with 2 mm thick CRCA sheet for outer shell and inner shell, double door with front and back openable with locking arrangement, provision of threaded earthing stud at bottom, inner shell completely vermin proof and to accomodate incoming/outgoing MCCB, MCBs and TPN aluminium busbar 400 Amps and extension links of rating not less than 1.5 times the rated capacity of respective MCCBs. The TPN busbar and extension link shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on epoxy resin insulator. All control wires shall be with 2.5 sqmm multistranded copper conductor wire and shall be properly bunched , tied ferruled for proper identification and crimped with adequate size of lugs. The panel shall be mounted on 50x50x5mm angle iron stand of height 45cm above ground level and 45 cm embedded in ground, computer cut self adhesive vinyl danger notice plate having conventional symbol of bone and skull be provided. The panel shall be consist of following accesories:-
1
-
-
... More
Item 32 Contd../-
(a) MCCB 4 Pole 250 Amp 50 Hz 415 V with rupturing capacity 36 KA, Ics=100% Icu and adjustable thermal and magnetic setting - 01 No (Incoming)
(b) MCCB 3 Pole 40 Amp 50 Hz 415 V with rupturing capacity 16 KA, Ics=100% Icu and adjustable thermal setting and fixed magnetic setting - 15 Nos (c) Digital Voltmeter - 01 No
(d) Digital Ammeter - 01 No
(e) Indicating lamps R,Y,B - 01 set
-
-
-
... More
Supply, installation , testing and commissioning indoor LT Distribution Panel suitable for 3 phase, 4 wire, 415 volts 50 Hz supply system with suitable size and powder coating provided with suitable to make it dust/vermin proof. The panel should be CPRI approved shall be made with 2 mm thick CRCA sheet for outer shell and inner shell, double door with front and back openable with locking arrangement, provision of threaded earthing stud at bottom, inner shell completely vermin proof and to accomodate incoming/outgoing MCCB, MCBs and TPN aluminium busbar 400 Amps and extension links of rating not less than 1.5 times the rated capacity of respective MCCBs. The TPN busbar and extension link shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on epoxy resin insulator. All control wires shall be with 2.5 sqmm multistranded copper conductor wire and shall be properly bunched , tied ferruled for proper identification and crimped with adequate size of lugs. The panel shall be mounted on 50x50x5mm angle iron stand of height 45cm above ground level and 45 cm embedded in ground, computer cut self adhesive vinyl danger notice plate having conventional symbol of bone and skull be provided. The panel shall be consist of following accesories:-
1
-
-
... More
Item 33 Contd.../-
(a) MCCB 4 Pole 100 Amp 50 Hz 415 V with rupturing capacity 16 KA, Ics=100% Icu and adjustable thermal setting and fixed magnetic setting - 01 No (Incoming)
(b) MCCB 3 Pole 63 Amp 50 Hz 415 V with rupturing capacity 16 KA, Ics=100% Icu and adjustable thermal setting and fixed magnetic setting - 04 Nos (c) Digital Voltmeter - 01 No
(d) Digital Ammeter - 01 No
(e) Indicating lamps R,Y,B - 01 set
-
-
-
... More
Supply and lay PE/PP DWC pipe of outer dia 110 mm laid in tranches/ ducts for cable protection and jointing of pipes using couplers complete all as specified and directed.
1000
-
-
... More
Supply and lay PE/PP DWC pipe of outer dia 50 mm laid in tranches/ ducts for cable protection and jointing of pipes using couplers complete all as specified and directed.
1000
-
-
... More
Supply and fix wall mounted plug socket suitable for IP 44 degree of protection of capacity 32 Amps rating 3P+E complete all as specified and directed.
4
-
-
... More
Supply and fix wall mounted plug socket suitable for IP 44 degree of protection of capacity 16 Amps rating 3P+E complete all as specified and directed.
17
-
-
... More
Supply & Fix MCCB FP 500 Amps, 50 KA, Ics=100%Icu and adjustable thermal setting and magnetic setting including factory made enclosure made out of 2 mm thick CRCA sheet and duly powder coated mounted on 50x50x6mm angle iron stand of height 60 cm above ground level complete all as specified and directed.
1
-
-
... More
Supply & Fix MCCB TP 250 Amps, 36 KA, Ics=100%Icu and adjustable thermal setting and fixed magnetic setting including factory made enclosure made out of 2 mm thick CRCA sheet and duly powder coated mounted on 50x50x6mm angle iron stand of height 60 cm above ground level complete all as specified and directed.
1
-
-
... More
Supply & Fix MCCB TP 160 Amps, 25 KA, Ics=100%Icu and adjustable thermal setting and fixed magnetic setting including factory made enclosure made out of 2 mm thick CRCA sheet and duly powder coated mounted on 50x50x6mm angle iron stand of height 60 cm above ground level complete all as specified and directed.
1
-
-
... More
Supply & Fix MCCB TP 100 Amps, 16 KA, Ics=100%Icu and adjustable thermal setting and fixed magnetic setting including factory made enclosure made out of 2 mm thick CRCA sheet and duly powder coated mounted on 50x50x6mm angle iron stand of height 60 cm above ground level complete all as specified and directed.
2
-
-
... More
Supply & Fix MCCB TP 63 Amps, 16 KA, Ics=100%Icu and adjustable thermal setting and fixed magnetic setting including factory made enclosure made out of 2 mm thick CRCA sheet and duly powder coated mounted on 50x50x6mm angle iron stand of height 60 cm above ground level complete all as specified and directed.
13
-
-
... More
Supply & Fix MCCB TP 32 Amps, 16 KA, Ics=100%Icu and adjustable thermal setting and fixed magnetic setting including factory made enclosure made out of 2 mm thick CRCA sheet and duly powder coated mounted on 50x50x6mm angle iron stand of height 60 cm above ground level complete all as specified and directed.
15
-
-
... More
M&L for cutting existing road/hard standing not exc 45x60 cm in wide & depth getting out excavated material for laying GI tube, returning, filling & well ramming, watering, finish surface 15 cm from top using PCC 1:3:6; including removal of surplus soil complete all as specified and directed.
12
-
-
... More
M&L for earthing complete with Galvanised steel earth plate electrode 60 cm x60 cmx6 mm thick buried directly in ground ( earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 mtr below normal ground level, including provision of GI earth strip 32x6 mm as earth lead and connected by means nuts, bolts , check nuts and washers of galvanised iron or steel, provision of 40 dia GI pipe light grade for GI strip protection connected from earth plate electrode to main switch board , provision of 20 mm dia GI pipe medium grade for watering arrangement and PCC ( 1:3:6) type C2 chamber , MS funnel , wire guage, 50 mm thick RCC 1:2:4 type B1 earth pit cover with 6 nos 8 mm dia high strength deformed steel TMT bars on both ways including necessay excavation in any type of soil , returning, filling in, removal of surplus soil to distance not exceeding 50 mtr, provision of charcoal an salt complete all as shown in eletrical plate No.3 of schedule Part-I all as specied and as directed and testing on completion.
Note :- Cost of GI earth strip and GI protection pipe upto 7.5 mtr length above GL shall be deemed to be included in the unit rate quoted for this item. GI strip beyond 7.5m shall be measured and paid seperately
18
-
-
... More
PILE FOUNDATION
-
-
-
... More
Drilling / boring through any type of soil (soft/loose soil or hard/dense soil/stiff clay/sand/cobble stone/soft conglomerate/loose boulders) up to the depth as directed/indicated for 500mm outer dia bored cast-in-situ vertical piles duly stabilizing the sides by drilling fluids (Reverse or DMC method) or by driving 6mm thick casing pipe upto loose strata or refusal level or by any other approved method and disposal of drilling/bored material to a distance exc. 50m. and not exc. 100m all as specified and shown on drawings.
336
-
-
... More
All as per Item No.46 above but on soft rock
140
-
-
... More
All as per item No.46 above but on hard rock
52
-
-
... More
Note for Item No.46 to 48
(i) Concrete and reinforcement shall be measured and paid separately.
(ii) The boring of piles shall be commenced from original ground level before carrying out site leveling work. The depth of boring of piles shall be measured from the top of original ground level to the approved founding level.
(iii) Bentonite slurry used for mixing with soil (obtained from the boring) shall be disposed off out side MD land as directed by the Engineer-in-Charge. The unit rate quoted against above item shall interalia be deemed to included for this operation and no extra payment shall be admissible on this account.
(iv) Casing pipe used while driving of piles shall be removed after providing RCC cast in situ piles as directed by the Engineer-in-Charge. The unit rate quoted against above items shall interalia be deemed to include for this operation and no extra payment shall be admissible on this account
-
-
-
... More
M&L for M-35 design mix concrete for cast-in-situ piles using termite method including chipping of piles from cut off level to a minimum height of 50cm including necessary excavation and earth work together with disposal of chipped off concrete and spoil obtained from excavation to a distance exc. 500m. and n.exc. 1000m. complete all as specified and shown in drawings.
Note :Reinforcement shall be measured and paid separately under relevant items of this Schedule.
155
-
-
... More
M&L for high strength deformed steel CRS bars 10mm dia and over, cut to length, bent to shape required, including cracking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified. and as directed.
20500
-
-
... More
M&L for high strength deformed steel CRS bars, 5mm to 10mm dia cut to length, bent to shape required including cranking and binding with mild steel wire (annealed) not less than 0.90mm dia as in stirrups, spacers and binders all as specified and as directed.
560
-
-
... More
Carrying out/conducting testing of pile for Initial load test all as per clause 6.1.5. & 6.1.6 of IS-2911 Part - IV - 1985, for 500mm dia pile, intial load test shall be carried out for load twice of safe load, including bringing at site all testing equipment, making arrangement for testing and removal of the same after completion and recording the test results and preparing the test sheets complete all as specified and directed.
1
-
-
... More
Carrying out/conducting testing of pile for routine load test all as per clause 6.1.5. & 6.1.6 of IS-2911 Part - IV - 1985, for pile of 500mm dia; routine load test shall be carried out for 1.5 times of safe load, including bringing at site all testing equipment, making arrangement for testing and removal of the same after completion and recording the test results and preparing the test sheets complete all as specified and directed.
1
-
-
... More
M&L for carrying non-destructive integrity test on piles as per IS:2911 Part IV by using pile integrity tester complete as specified as directed
48
-
-
... More
Mobilization of tools and equipments with testing personnel from laboratory to site for conducting Pile integrity at site with demoltion completely.
1
-
-
... More
Subtotal
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%