Military Engineer Services Tender
To inquire about any e-tender the Andaman & Nicobar Islands government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder one can find every eprocurement Punjab tender on BidAssist. BidAassist has collated each and every Eproc Andaman & Nicobar Island Tender on its website. Looking for Andaman & Nicobar Island tenders online or going through the cumbersome government websites for it, has been made easier with the help of BidAssist.
Military Engineer Services - MES Tender
Civil And Construction
Water Storage And Supply
Eprocure
Opening Date18 Dec 2024
Closing Date8 Jan 2025
Tender Amount₹ 49,00,000
Costs
EMD
₹ 98,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_689272_1Tender No
8502/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supply and fix in replacement of sand filter Media (SFM) of capacity of 5000 LPH media Dual-sand and anthracite including suitable filter media complete all as specified and as directed by Engr-in-Charge.
1
-
-
... More
Repair / Replacement filter for 5000ltrs/hr capacity RO plant of existing make & model along with all connected accessories such as rubber ring etc complete all as specified and as directed by Engr-in-Charge
1
-
-
... More
Supply and fix in replacement of Activated carbon filter (ACF) 5000 LPH media Activated Carbon of existing make and model , including suitable filter media complete all as specified and as directed by Engr-in-Charge
1
-
-
... More
S&F in replacement Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed ( Minimum weight 20mm - 210gms / 25mm - 455 gm) Make Prayag/Polytuf all as specified and directed by Engr-in-Charge.
-
-
-
... More
(a) 20mm bore
105
-
-
... More
(b) 25mm bore
100
-
-
... More
(c ) 40mm bore
10
-
-
... More
S&F in replacement of pressure gauge analog type of capacity 0 to 10.60 Kg/ cm2 (0 to 150 lb/ Sq inch) of Dial size 100 mm dia make - FIEBIG
3
-
-
... More
M&L for detecting and repairing leakage in CI/DI pipe lines of size 250/200 mm bore, taking up unserviceable /serviceable CI/DI water main with spigot and socket ends (including fittings) of any type/grade and joints from trenches and layingnew CI/DI pipe lines of size 300 mm bore in trenches or placing on existion pillers /supports as directed to perform the following activities :-
(a) Execution and earth work in soil / mud by using machinery/labour to suitable length (Appx 10 mtrs) and forming bund with excavated soil to avoid sea / row water entering into the working area including pumping/bailing out water by using portable desal engine driven pump set. (b) Cutting of CI / DI pipe of size 300 mm bore after through inspetion for the damaged pipe line including disconnecting / dismentling.
(c ) Taking out CI/DI pipewith CI/DI specials after removing from joints/burning out joints and removing lead at both ends with the help of hydrolic crane other machinery and keeping aside fr further disposal.
(d) Cutting of new pipe into pieces as per rquirement and laying using machinery.
( e) Alinging the pipe line as per sie condition, in setting the Collar suitable for 300 mm CI/DI pipe.
(f) Attending repair work within the minimum time frame/period as specified by Engr - in - charge.
5
-
-
... More
Notes for the Items
i) The unit rate is deemed to include cost of tools and plants and transprtation required for attending the repair work.
ii)Supply only CI/DI pipe shall be measured & paid for seperately under relevant item of this schedule.
iii) Extra soil required for refilling /making bunds to prevent water entering into the work place shall be deemed to include in the unit rate.
iv) Specials / rubber or fiber/ lead joints shal be measured and paid for seperately under relevent items of this schedule.
v) Old unsv CI/DI pipes, fittings, lead, nuts, bolts, washer, gaskets etc. shall become contractors property and necessary recovery as per schedule of credit shall be deducted from contractor.
-
-
-
... More
All as per item No:9.00 here-in - before but for CI/DI pipe line of size 80/100/150mm
3
-
-
... More
M&L for attending of water supply complaints for any leakage/blockage in GI /CPVC/PPR pipe lines of size 20mm/25mm bore taking up serviceable / unserviceable GI water pipe lines all fitings/fixtures from trench including supply and laying GI / CPVC tubing 20mm/25mm bore up to 1 mtr length (max) including necessary cutting, threading and replacement of unserviceable GI/CPVC fittings such as GI/CPVC socket /Nipple/union socket, Tee, Tee reducer etc. of size 20mm/25mm including necessary excavation and earth work upto 1 mtr length to repair the leakage/clearing the blockage in the pipe line and testing on completion.(Replacement of unserviceable GI fittings such as GI socket /Nipple/union socket/Tee/Tee reducer etc. shall be measured and paid for separately under relevant items of this schedule here-in-after)
46
-
-
... More
All as per item No 11.00 here-in- before but of size 40/50mm bore GI pipe line and -do-
22
-
-
... More
All as per item No 11.00 here-in-before butof size 80/100mm bore GI pipe line and -do-
9
-
-
... More
All as per item No 11.00 here-in-before but in GI /CPVC pipe lines on wall/floor/roof of the bldg (20/25mm)
22
-
-
... More
Al as per item No 11.00 here-in-before but in GI/CPVC pipe lines on wall/floor/roof of the bldg. (40/50mm)
5
-
-
... More
All as per item No 11.00 here-in-before but in GI /CPVC pipe lines on wall/floor/roof of the bldg. (80/100m)
3
-
-
... More
Taking up or down old/chocked water tubing 20/25/50/80/100 mm bore with fittings from trenchs/walls cleaning for refixing in new or old position or credit to contractor all as specified and as directed.
70
-
-
... More
Supply and fix in replacement of 20mm dia CPVC pipes SDR 11 including fittings on walls/ceilings/laying in trenches complete all as specified and as directed.
16
-
-
... More
Supply and fix in replacement of 25mm dia CPVC pipes SDR 11 including fittings on walls/ceilings/laying in trenches complete all as specified and as directed.
38
-
-
... More
Supply and fix in replacement of 50mm dia CPVC pipes SDR 11 including fittings on walls/ceilings/laying in trenches complete all as specified and as directed.
16
-
-
... More
Supply and Fix in replacement of CPVC male brass threaded adaptor (MTA/MBTA) suitable for 20 mm CPVC pipe Complete all as specified and directed
19
-
-
... More
Supply and Fix in replacement of CPVC male brass threaded adaptor (MTA/MBTA) suitable for 25mm CPVC pipe Complete all as specified and directed
18
-
-
... More
Supply and Fix in replacement of CPVC male brass threaded adaptor (MTA/MBTA) suitable for 50mm CPVC pipe Complete all as specified and directed
10
-
-
... More
Supply and Fix in replacement of CPVC female brass threaded adaptor (FTA/FBTA) suitable for 20 mm CPVC pipe Complete all as specified and directed
24
-
-
... More
Supply and Fix in replacement of CPVC female brass threaded adaptor (FTA/FBTA) suitable for 25 mm CPVC pipe Complete all as specified and directed
28
-
-
... More
Supply and Fix in replacement of CPVC female brass threaded adaptor (FTA/FBTA) suitable for 50 mm CPVC pipe Complete all as specified and directed
9
-
-
... More
Supply and Fix in replacement of CPVC tank adaptor suitable for 20 mm CPVC pipe Complete all as specified and directed
29
-
-
... More
Supply and Fix in replacement of CPVC tank adaptor suitable for 25 mm CPVC pipe Complete all as specified and directed
28
-
-
... More
Supply and Fix in replacement of CPVC union suitable for 20 mm CPVC pipe Complete all as specified and directed
24
-
-
... More
Supply and Fix in replacement of CPVC union suitable for 25 mm CPVC pipe Complete all as specified and directed
14
-
-
... More
Supply and Fix in replacement of CPVC union suitable for 50 mm CPVC pipe Complete all as specified and directed
8
-
-
... More
Supply and Fix in replacement of CPVC ball valve suitable for 20 mm CPVC pipe Complete all as specified and directed
22
-
-
... More
Supply and Fix in replacement of CPVC ball valve suitable for 25 mm CPVC pipe Complete all as specified and directed
27
-
-
... More
Supply and Fix in replacement of CPVC brass elbow suitable for 20 mm CPVC pipe Complete all as specified and directed
12
-
-
... More
Supply and Fix in replacement of CPVC brass elbow suitable for 25mm CPVC pipe Complete all as specified and directed
27
-
-
... More
Supply and Fix in replacement of CPVC brass elbow suitable for 50mm CPVC pipe Complete all as specified and directed
12
-
-
... More
S&F in replacement tubes of medium grade galvanized with all fittings laid in trenches/fixed on wall/on roof etc of the following sizes :-
-
-
-
... More
(a) 20mm dia
18
-
-
... More
(b) 25mm dia
142
-
-
... More
(c) 40mm dia
36
-
-
... More
(d ) 50mm dia
18
-
-
... More
(e) 80mm dia
18
-
-
... More
(f) 100mm dia
6
-
-
... More
S&F in replacement of Ductile Iron pipes with spigot and socket ends centrifugally cast class K-9 any length, laid in trenches of following sizes :-
-
-
-
... More
(a) 80mm bore
6
-
-
... More
(b) 100mm bore
12
-
-
... More
(c) 150 mm bore
11
-
-
... More
(d) 200mm bore
11
-
-
... More
(e) 250mm bore
15
-
-
... More
Supply and fixing in replacement Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe fixed of the following sizes :-
-
-
-
... More
(a) 20 mm bore
6
-
-
... More
(b) 25 mm bore
12
-
-
... More
(c) 40 mm bore
6
-
-
... More
(d) 50 mm bore
3
-
-
... More
(e) 80 mm bore
3
-
-
... More
Supply and fix in replacement of flanged type Sluice valve, with hand wheel, made of CI Body with SS/ Brass spindle PN-1.6 rating, IS-14846 make Upadhyay/Kirloskar of following sizes
-
-
-
... More
(a) 80mm bore
2
-
-
... More
(b) 100mm bore
4
-
-
... More
(c ) 150mm bore
5
-
-
... More
(d) 200/250 mm bore
3
-
-
... More
Repairs to existing Air release valve by remvoing the valve and repairing the same by replacing gaskes,nut,bolts, top cover and ball refixing the same , cast iron body, on both sides of the flanges, bolts and nuts complete of following sizes :-
-
-
-
... More
(a) 100 mm dia bore.
1
-
-
... More
Supply and fix in replacement of air release valve suitable for 100 mm dia pipe all as specified and directed.
1
-
-
... More
S&F in replacement of CI/DI Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot or flanged) collars, caps and plugs upto 150mm bore ISI Marked all as specified and directed by Engr-in-Charge
250
-
-
... More
Supply and fix in replacement Union socket GI medium grade Make Bansal/Jindal/Tata of following sizes :-
-
-
-
... More
(a) 20mm bore
12
-
-
... More
(b) 25mm bore
16
-
-
... More
(c) 40mm bore
14
-
-
... More
(d) 50mm bore
12
-
-
... More
(e) 80mm bore
7
-
-
... More
Supply and fix in replacement GI Nipple 6" long Make Bansal/Jindal/ Tata of following sizes :-
-
-
-
... More
(a) 20mm dia
14
-
-
... More
(b) 25mm dia
20
-
-
... More
(c ) 40mm dia
8
-
-
... More
(d ) 50mm dia
5
-
-
... More
S&F in replacement joint with rubber or fiber board gasket (flange joints) suitable for flanged pipes and fittings of the following sizes :-
-
-
-
... More
(a) 80mm bore
6
-
-
... More
(b) 100mm bore
6
-
-
... More
(c ) 150mm bore
6
-
-
... More
S & F in replacement of GI Tee Reducers medium grade Make Bansal/Jindal/Tata of the following sizes :-
-
-
-
... More
(a) 40x40x20mm
6
-
-
... More
(b) 40x40x25mm
4
-
-
... More
(c) 50x50x20mm
5
-
-
... More
(d) 50x50x25mm
5
-
-
... More
S&F Gland packing 12.5mm/10mm dia / thick Make Champion / equivalent for sluice valve / pumps, leakage rectification.
7
-
-
... More
Taking down UNSV sluice valves and Re-fixing the same in its original position/location with flanged ends including necessary cleaning, resetting & minor repairs for its smooth functioning , any pattern of following sizes :-
-
-
-
... More
(a) 80mm
5
-
-
... More
(b) 100mm
5
-
-
... More
(c ) 150mm
6
-
-
... More
(d ) 200/250mm
3
-
-
... More
S&F mechanical joint suitable for spigot and socket pipes and fittings for the following size as specified and directed by Engr-in-charge
-
-
-
... More
(a) 80mm
1
-
-
... More
(b) 100mm
1
-
-
... More
(c ) 150mm
2
-
-
... More
(d ) 200/250mm
1
-
-
... More
S&F rubber gasket joint suitable for spigot and socket pipes and fittings for the following size as specified and directed by Engr-in-charge
-
-
-
... More
(a) 80mm
12
-
-
... More
(b) 100mm
10
-
-
... More
(c ) 150mm
6
-
-
... More
M&L for fabrication of MS channel base of existing size and grade made out of Steel channel MC75,MC100 &MC125 (As per existing dimensions) for pump and motor capacity 50 HP / 60 HP as mentioned against item including necessary cutting, welding, grinding etc., and fixing the same on newly provided PCC foundation, foundation bolt etc., as per manufacturer recommendations to ensure proper alingment of both pump and motor complete, carry out painting the complete base plate with two coat of synthetic enamel paint Black shade / colour over a coat of Red oxide primer complete
35
-
-
... More
M&L for tyton joints suitable for DI pipe of size :-
-
-
-
... More
a) 80 mm dia
4
-
-
... More
b) 100 mm dia
4
-
-
... More
c) 150 mm dia
3
-
-
... More
d) 200/250 mm dia
2
-
-
... More
Supply, lay and testing of ERW MS pipes, in replacement ISI marked grade 8 mm thick as per IS : 3589 grade 330 suitable for welded joints and flanged joints including fabricating tailor made as per site requirement including painting with two coats of anticorrosive paint complete all as specified of 250 mm dia. Make Allied Pipes after bailingout water from existing semi UG sump of Cap.30000 Gallons with Appx. 7 Mtr.depth at command Swimming Pool filtration Plant at minniebay and other places as directed by Engr-in-charge.
12
-
-
... More
Supply and fix nuts,bolts, washers for valves and pump sets of various grade as required.
5
-
-
... More
Supply only TDS test for pump house to check TDS valve
2
-
-
... More
Supply only Chlorine test kit fo pump house to calibirate chlorine value
2
-
-
... More
Supply only Orthotodiline chemical solution for Chlorine checking
1
-
-
... More
S&F in replacement of Rotational moulded polyetheylene (HDPE) Water Tanks, Cylindrical & Vertical Type, Triple/5 layer layered, ISI marked, hoisted and fixed in position including provision of 40mm / 25mm dia CPVC spouts for connecting inlet, outlet, over flow and washout pipes complete including taking down old tanks and removing to store complete all as specified and as directed of following capacities :-
-
-
-
... More
(a). 500 Ltr capacity
14
-
-
... More
(b). 1000 Ltr capacity
27
-
-
... More
(c). 2000 Ltr capacity
4
-
-
... More
(d). 5000 Ltr capacity
1
-
-
... More
S&F in replacement PVC tank cover suitable for service over head tank including necessary fixing arrangements of following capacity
-
-
-
... More
500/750 /1000 ltr capacity
125
-
-
... More
1500/2000 ltr capacity
15
-
-
... More
5000 ltr capacity
10
-
-
... More
S&F in replacement, Cast Iron foot valve ball type of size 150mm, heavy duty ( confirming to relevant IS fixing with provision of new rubber flange gasket, nut, bolt, double washer, etc., complete including dismantling of unserviceable valve from UG sump at command Swimming Pool filtration Plant/ minniebay pump house. all as specified and as directed. Make : Normax,Kirlosker or equivqlent.
1
-
-
... More
S&F in replacement, Cast Iron foot valve ball type of size 200mm, heavy duty ( confirming to relevant IS fixing with provision of new rubber flange gasket, nut, bolt, double washer, etc., complete including dismantling of unserviceable valve from UG sump at command Swimming Pool filtration Plant/ minniebay pump house. all as specified and as directed. Make : Normax,Kirlosker or equivqlent.
1
-
-
... More
S&F in replacement, Cast Iron foot valve ball type of size 250mm, heavy duty ( confirming to relevant IS fixing with provision of new rubber flange gasket, nut, bolt, double washer, etc., complete including dismantling of unserviceable valve from UG sump at command Swimming Pool filtration Plant/ minniebay pump house. all as specified and as directed. Make : Normax,Kirlosker or equivqlent.
1
-
-
... More
Supply and fix Strainer for swimming pool conforming to IS, size upto 250mm dia all as specified and directed.
1
-
-
... More
S&F in replacement of Butter fly valve Flange type suitable for 200/250mm bore with rubber gaskets, nut and bolts of suitable size, ISI marked conforming to IS-13095 complete including dismantling of unserviceable valve all as directed.
1
-
-
... More
Supply and fix suction Sweeping Machine/ Pump set Mono block type 5HP Capcity, 3 Phase,415 Volts 50 Hz complete all as specified and directed.
1
-
-
... More
Supply & fix suction sweeping brush kit of SS/MS with provsn for connection PVC pipe for in and out along with tyre wheel and nylon brush with suitable size and length of nylon rope for moving of the sweeper all as specified and directed by Engr-In-charge.
1
-
-
... More
Supply & fix in replacement PVC flexible spiral type hose pipe heavy duty 40/50 mm Dia. (as per sample)
40
-
-
... More
S&F in replacement rubber (star) coupling of existing size for suitable 40HP/50HP/60HP pump set all as specified and directed at site
14
-
-
... More
S&F in replacement MS coupling of existing size suitable for 40HP/50HP/60HP pump as per site requirement all as specified and directed by engineer in charge
4
-
-
... More
S & F in replacement insulation rubber mat of size 1x2 mtr in black colour, 19 mm thick confirming to IS 15652/IE 61111 of suitable size all as specified and directed to the entire satisfaction of Engr-in-charger
3
-
-
... More
Repair/ Maint of masonry pit of existing size (internal) for sluice valves with sub PCC block wall straight or curved radius built in CM 1:6 PCC 1:3:6 in foundation, 15 mm thick plaster in CM 1:4 on internal faces of walls, 40 mm thick, PCC 1:2:4 in floors including valve pit cover made out of MS sheet 2 mm thick with angle iron 40x40x6 mm frame with fixing hinges, locking arrangements, hold fasts and handle etc duly painted with two coats of synthetic enamel paint over a coat of red oxide primer including necessary excavation & earth work complete all as including demolition of existing broken valve pit chamber complete in all respects to the entire satisfaction of Engr-in-Charge Note : MS sheet will be measured and paid seperately under relevant item of the schedule.
9
-
-
... More
M & L for replacement of ball bearing suitable for 30/40/50/60HP motor complete all as specified and as irected.Make: SKF or as per site requirement.
2
-
-
... More
Supply, installation, testing and commissioning factory fabricated indoor type totally enclosed LT panel of suitable size with bus bar confirming to relevent IS and protection class IP -42, dust, vermin and weather proof fabricated out of 3.15mm thick CRCA sheet duly powder coated, mounted on 40x40x5mm MS angle iron frame, duly welded in shape and coated with two coats of synthetic enamel paint of approved color over a coat of redoxide primer including necessary grouting of legs 300mm deep in ground in PCC 1:4:8 type D2 using 40mm gradeded stone aggregate, panel base to be 500mm above ground level with suitable compartments for controls and monitors including cable gland for incoming and out going cables, locking arrangements including accommodating, supply and fixing in replacement with following accessories
1
-
-
... More
(a) MCCB TPN 400 Amps 50Hz,415Volts 35 KA-01 Nos (incomoing) (b) MCCB TPN 125 Amps 50Hz,4 pole,25 KA,415 V -04 Nos (outgoing)
(c) star delta starter with suitable contactor and connected items for 30 HP pump-03 Nos
(d) star delta starter with suitable contactor and connected items for 7.5 HP pump -01 Nos
(e) Voltmeter 0-500V with selector switch (Digital Type)
(f) Ammeter 0-50 Amps with CTs and selector switch
(g) Indicating lamp (RYB) (h) PCC foundation (civil work) for grouting of panel Note : In panel all items included which will required for manufacturing of said rating pump panel all as directed by Engineer-in Charge.
-
-
-
... More
M&L for testing of water samples and obtain the test result for the perametrs as per IS 10500 like TDS,Colour,odour,TSS,PH,coliform turbidity,etc by carrying physical,chemical,microbiology examiniation from any govt authoarised /NABL approved laboratary complete all as specified and as directed by Engr-in-Charge. Note :(i) Source/location of water samples shall be decided by the Engineer-In-Charge. (ii) Test test report shall be submitted by the contractor along with RAR/FB for payment of this item
4
-
-
... More
M&L for cleaning and sterilization inside the RCC/ PVC water storage tank of capacity not exceeding 500 Ltr of any description and in any position comprising following cleaning and sterilization of water tanks through bacteriological treatment by using chlorine (I) CONTRACTOR WILL BE RESPONSIBLE FOR RECTIFICATION OF COMPLAINTS OCCURRED DURING CLEANING THE TANK i;e. NO WATER IN TANK/OVER FLOW DUE TO BROKEN OF FLOAT VALVE,TANK COVER, BLOCKAGE IN PIPE LINE TO BE INCLUDED IN QUOTED RATE. Make: RAYS CLEANTECH/ HAPPY TANK/ SATYA ENTERPRISE.
326
-
-
... More
M&L for cleaning and sterilization inside the RCC/ PVC water storage tank of capacity not exceeding 1000 Ltr through bacteriological treatment by using chemical compound & removing all muddysludge & foreign particles from the tank and drain the tank with suction wiper making it dry and treating it with ulteravoilet rays.Note:CONTRACTOR WILL BE RESPONSIBLE FOR RECTIFICATION OF COMPLAINTS OCCURRED DURING CLEANING THE TANK i;e. NO WATER IN TANK/OVER FLOW DUE TO BROKEN OF FLOAT VALVE,TANK COVER, BLOCKAGE IN PIPE LINE TO BE INCLUDED IN QUOTED RATE. Make: RAYS CLEANTECH/ HAPPY TANK/ SATYA ENTERPRISE.
135
-
-
... More
M&L for cleaning and sterilization inside the RCC/ PVC water storage tank of capacity not exceeding 2000 Ltr through bacteriological treatment by using chemical compound & removing all muddysludge & foreign particles from the tank and drain the tank with suction wiper making it dry and treating it with ulteravoilet rays.Note:CONTRACTOR WILL BE RESPONSIBLE FOR RECTIFICATION OF COMPLAINTS OCCURRED DURING CLEANING THE TANK i;e. NO WATER IN TANK/OVER FLOW DUE TO BROKEN OF FLOAT VALVE,TANK COVER, BLOCKAGE IN PIPE LINE TO BE INCLUDED IN QUOTED RATE. Make: RAYS CLEANTECH/ HAPPY TANK/ SATYA ENTERPRISE.
10
-
-
... More
M&L for cleaning and sterilization inside the RCC/ PVC water storage tank of capacity not exceeding 5000 Ltr through bacteriological treatment by using chemical compound & removing all muddysludge & foreign particles from the tank and drain the tank with suction wiper making it dry and treating it with ulteravoilet rays.Note:CONTRACTOR WILL BE RESPONSIBLE FOR RECTIFICATION OF COMPLAINTS OCCURRED DURING CLEANING THE TANK i;e. NO WATER IN TANK/OVER FLOW DUE TO BROKEN OF FLOAT VALVE,TANK COVER, BLOCKAGE IN PIPE LINE TO BE INCLUDED IN QUOTED RATE. Make: RAYS CLEANTECH/ HAPPY TANK/ SATYA ENTERPRISE.
2
-
-
... More
M&L for seven stage cleaning and sterilization of inside the RCC/ Steel Underground/semi underground/Sedmentation/clear water sumps of capacity UG sump reservoir 200000 gallons through bacteriological treatment by using chemical compound TERBAC G5/Inchor-5/NB-10/ TERBAC-G-65/ Inoxi-60/NB-69/Alstasan Silvox AND ULTRA VIOLET RAY. Make: rays Cleantech/ Happy tank/ satya enterprise. (a). First Stage is to drain out the water by using exit valve or high capacity dewatering system. (b). Second stage is cleaning all the algae formation inside the tank by using TERBAC G 65/Alstansan Silvox/ Inoxi-60/NB-69 a laboratory tested branded chemical of the company ans scrubbing the walls of the tanks. (c). Third strage is fresh water cleaning by high speed jet pump. (d). Fourth stage and first bacteria screening is decertification by using TERBAC-G5/ Inohor-5/NB-10/ Alstasan Silvox a Govt Laboratory certified branded compound. (e). Fifth stage is cleaning the floor of water tank by industrial vaccum cleaner. (f) . Sixth stage is the second bacteria screening and sterilizing method by using ultra violet ray within the tank and kills all suspended bacteria. (g) Seventh stage of cleaning and third bacteria screening is to sterilize the floor of the water tank by using laboratory certified, branded strong oxidizing agent TERBAC-G65/Inoxi-60/NB-69/Alstasan Silvox . NOTE:-(i) COMPANY WILL SUBMIT GOVERNMENT LABORATORY TEST CERTIFICATE OF TERBAC-G5/INCHOR-5/NB-10/Alstasan Silvox, TERBAC-G65/ INOXIi-60/NB-69, BEFORE CLEANING, FIX THE STICKER MENTIONING THE DATE OF CLEANING & NAME OF SITE AND ALSO PROVIDE CERTIFICATE CONFIRMING THE COMPLETION OF STERILIZATION OF WATER TANKS MENTIONING THE NAME OF STATION AND DATE OF CLEANING. ALL THE CLEANING & STERILIZATION STAFFS SHOULD BE UNDER ACCIDENTAL INSURANCE COVERAGE.) (ii) OUTLET PIPE OF OHT SHOULD BE PLUGGED BEFORE CLEANING THE OHT TO AVOID.ENTERING SCALES AND THE SAME SHALL BE RECONNECTED AFTER CLEANING THE OHT AND THE QUOTED RATE IS DEEMED TO BE INCLUDE FOR THE PROVISION . (III) STERILIZATION TEAM WILL BE COMPRISED OF AT LEAST 30% MEMBERS WHO ARE MINIMUM 03 MONTS CERTIFICATE HOLDER IN WATER TANKS STERILIZATION. (IV) CONTRACTOR WILL BE RESPONSIBLE FOR RECTIFICATION OF COMPLAINTS OCCURRED DURING CLEANING THE TANK I;E. NO WATER IN TANK/OVER FLOW DUE TO BROKEN OF FLOAT VALVE/ BLOCKAGE TO BE INCLUDED IN QUOTED RATE. NOTE:-THE WORK SHALL BE CARRIED THROUGH SPECILIZED AGENCY RAYS CLEANTECH/ HAPPY TANK/ SATYA ENTERPRISE.
1
-
-
... More
All as per ser item No 79.00 above but for of inside OVER HEAD reservoir/UG sump capacity 50000 gallons through bacteriological treatment by using TERBAC G5/Inchor-5/NB-10/ TERBAC-G-65/ Inoxi-60/NB-69/Alstasan Silvox AND ULTRA VIOLET RAY. Make: RAYS CLEANTECH/ HAPPY TANK/ SATYA ENTERPRISE.
3
-
-
... More
All as per ser item No 79.00 above but for of inside OVER HEAD reservoir/UG sump capacity 30000 Gallons through bacteriological treatment by using TERBAC G5/Inchor-5/NB-10/ TERBAC-G-65/ Inoxi-60/NB-69/Alstasan Silvox AND ULTRA VIOLET RAY. Make: RAYS CLEANTECH/ HAPPY TANK/ SATYA ENTERPRISE.
1
-
-
... More
M&L for fabrication of MS sheet (3.15mm thick) Make Tata or Equivalent for valve chamber cover with plates of Fe 410W, Gde E-250, quality -A (Plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment with riveted, bolted or welded attachment for locking arrangements complete including painting with two coat of synthetic enamel paint black colour/shade over a coat of redoxide primer complete all as specified and directed by Engr - in - Charge including taking down old one.
501
-
-
... More
M&L for repair / maintenance to Decrin dozing pump cat pt No - 96NGQ 51 Make : Declibac Technologies Pvt Ltd including replacement of UNSV spare parts Rotor assy with bearings bracket, Pump tube,Injection check valve 3/8",Weighted suction line strainer 3/8",Connecting nut 3/8" with adopter,Ferrule 1/4" etc and testing on completion for its smooth functioning to the entire satisfaction of Engr-in-Charge .
2
-
-
... More
S&F in replacement of sign/Name board for installation and display boards of water conserve quotes for user awareness madeout of SS pipe for standing pipe of 25mm/40mm of suitable height, with appropirate stickring on the board, the colur of letters and backgroung as directed by Eng-In-Charge.
1
-
-
... More
Disconnecting and taking out Monoblock/Centrifugal/submersible motor pump capacity upto 7.5 HP capacity, shifting the pump set to local workshop for repairs complete, overhauling, greasing, cleaning and after completion aligning the motor in proper position and painting with one coat of anti corrosive paint including preparation of old surface including testing and commissioning for smooth running condition upto the satisfaction of Engr-in-Charge complete all as specified and as directed by Engr-in-Charge
Note : Necessary Gate pass and issue/receipt voucher shall be submitted by the contractor before payment.
1
-
-
... More
Disconnecting and taking out Monoblock/Centrifugal/submersible motor pump capacity upto 10 HP capacity, shifting the pump set to local workshop for repairs complete, overhauling, greasing, cleaning and after completion aligning the motor in proper position and painting with one coat of anti corrosive paint including preparation of old surface including testing and commissioning for smooth running condition upto the satisfaction of Engr-in-Charge complete all as specified and as directed by Engr-in-Charge
Note : Necessary Gate pass and issue/receipt voucher shall be submitted by the contractor before payment
1
-
-
... More
Dismantling and taking out the existing mono block / centrifugal/ submersible type pump set, by disconnecting suction and delivery pipe lines of pump set , separate the motor from the pump, removing the burnt out winding from the slot cleaning the stator and rotor with CTC and smooth sand paper and rewinding the motor with suitable gauge of size with super enameled copper conductor and insulating by using class 'B' insulation keeping for drying, connecting electric connection, testing and commissioning upto the satisfaction of Engr-in-Charge complete all as directed for the following Capacity Upto 7.5 HP Pump Set.
Note : Necessary Gate pass and issue/receipt voucher shall be submitted by the contractor before payment
1
-
-
... More
Dismantling and taking out the existing mono block / centrifugal/ submersible type pump set, by disconnecting suction and delivery pipe lines of pump set , separate the motor from the pump, removing the burnt out winding from the slot cleaning the stator and rotor with CTC and smooth sand paper and rewinding the motor with suitable gauge of size with super enameled copper conductor and insulating by using class 'B' insulation keeping for drying, connecting electric connection, testing and commissioning upto the satisfaction of Engr-in-Charge complete all as directed for the following Capacity Upto 10 HP Pump Set.
Note : Necessary Gate pass and issue/receipt voucher shall be submitted by the contractor before payment
1
-
-
... More
S&F in replacement of Gun Metal Foot valve 50 mm bore complete all as specified and as directed by Engr-in-Charge
1
-
-
... More
S&F in replacement of Gun Metal Foot valve 80 mm bore complete all as specified and as directed by Engr-in-Charge
1
-
-
... More
M&L for disconnection electrical connection of pressure pump of RO Plant capacity 7.5HP/5.5KW and taking out complate assembly with electric motor, transporting to workshop and testiing the complete and refixing with new nuts, bolts & washers and same as fitting the existing position and commissioning, testing for smooth running condition all as directed by Engineer -in-charge Note : Necessary gate pass and voucher from OEM authorised workshop shall be submitted alongwith RAR/FB for payment duly endorsed by Engr-in-Charge and Contractor
1
-
-
... More
M & L for Inspection and carrying out B-Checks of DG Set Once in 300 Hours of run or 6 months whichever is earlier installed at various locations by representative / authorized Service Engineer of OEM of the DG Set including inspection, maintenance, changing lub oil filters, fuel filters, by pass filter and water filter and servicing of DG Set including checking of Alternator and its connections, Non AMF / AMF Panels connected to DG Sets for routine check-up including routine / preventive maintenance checks, checking up of engine and alternator for the smooth functioning as per the Manufacturer’s instructions including checking of Engine Oil Level, Draining Sediments from Fuel Tank, checking of Pre Cleaner Dust Pan, Air Cleaner Restriction, Coolant Level, Recording Oil Pressure, Checking / Tightening of all Bolts / Nuts of Engine and Alternator, checking of AVM Pads, Diaphragm Coupling, Air Piping, check / adjust Belts, checking Battery Voltage, Water Level and checking Fan Hub / Air Blower Hub and Water Pumps, cleaning of electrical connections, checking of safety controls, cleaning of Engine including cleaning of Air Filter, Corrosion Inhibitor, O Ring, Gaskets, Screws etc. checking of engine oil thickness, and draining out old engine oil from oil chamber, if density of engine oil is increased. And topping up of engine oil , if engine oil density is found satisfactory. and removing deposited material including tightening of all inlet and outlet connections and replacing minor items such as detoriated clamp, screws, washers etc., cleaning of Roof, Floor of the DG Set Room complete all as specified and as directed.
-
-
-
... More
All as per item No.94.00 above but for DG set of capacity 125 KVA
1
-
-
... More
All as per item No.94.00 above but for DG set of capacity 82.5 KVA
1
-
-
... More
All as per item No.94.00 above but for DG set of capacity 62.5 KVA
1
-
-
... More
All as per item No.94.00 above but for DG set of capacity 25 KVA
1
-
-
... More
Supply , fixing in replacement of Air filter of 25/62.5/82.5/125 KVA DG set all as specified and directed by Engineer-in-charge Make: Kirloskar/Cummins/Greaves`
1
-
-
... More
Supply & fixing in replacement of water pump assly in 20 / 62.5 / 82.5 / 125 KVA DG set make Cummins / Kirloskar / Greaves
1
-
-
... More
Supply and pouring engine oil for DG set grade oil 20W40 complete all as directed Make : I O C Servo
55
-
-
... More
Supply and pouring coolant for radiator of DG set of any capacity of DG set make: Cummins / Kirloskar / Greaves
20
-
-
... More
Supply pouring distilled water for radiator and batteries of DG set
15
-
-
... More
M & L for repair and reconditioning the starting motor 12 V DC system including taking out the defective starter from 30-125 KVA capacity DG set , complete dismantling and repair and replacing the carbon brushes with holder, solenoid switch assly, bushes, commutator unit, starting coil, etc refixing the same in the DG set and connecting with the circuit including all required items, starting and testing all as specified and directed by Engineer-in-charge
1
-
-
... More
Dismantling the battery charger alternator 12 V DC from engine, carryingout repairs by complete dismantling and cleaning, renewal of carbon brushes, rectifier kit, diodes, varnishing the coils, replacing bearing, regulator, fixing back in the engine and connecting electrical system complete of 20/ 62.5 / 82.5 KVA / 125 KVA DG set all as specified and directed by Engineer-in-charge
1
-
-
... More
M & L for supply, installation and commissioning in replacement of AVR in 20 /62.5/82.5/125 KVA DG set by taking out the defective AVR from DG set alternator from its control circuit, fixing the new AVR and connecting in the circuit, thorough checking and testing the DG set on load all as directed by Engineer-in-Charge make Kirloskar / Altex / Senlec
1
-
-
... More
S & Fixing including testing in replacement of the lead acid battery 12 V DC 180 AH including the initial charge, terminals connector make : Exide / SF / Lucas
1
-
-
... More
M & L for supply fixing in repairs magnetic pick up suitable for 30 /62.5 /82.5 /125 KVA DG set by taking out the defective unit from engine , replacing the same and adjusting the gap setting. Connecting in the circuit all as specified as directed by Engineer-in-charge
1
-
-
... More
S & Fixing in repairs High water temperature trip safety 30 KVA to 125 KVA DG set and connecting with DG set system all as specifiied and directed by Engineer-in-charge
1
-
-
... More
Supply & fixing in replacement of belt in 25 KVA to 125 KVA and testing as specified and directed by Engineer-in-charge
2
-
-
... More
Dismantling the engine turbo charger assly by taking out aircleaners, after cooler housing and its connected accessories in 62.5 KVA to 250 KVA DG set no complete dismantling and servcing by replacing the defective wheel and shaft, compressor wheel and repair kit, assembling the turbo charger and fixing back in to the engine and mouting, starting and testing the DG set on load all as specified by Engineei-in-charge.
Note The spare required for repairs will be measured and paid seperately
1
-
-
... More
ssupply and fixing in replacement of security light fitting LED type, 20 Watts 240 Volts luminous shall be more than 2000 lumen, efficiency not less than 100 lm/Watt , and accessories complete mounted on 25 mm dia light grade GI pipe bracket 1.0 mtr long bent to shape, mounted on wall,connection complete including taking down old unserviceable CFL/tube light security light fitting all as specified and as directed.
2
-
-
... More
S&F in replacement of Street light fitting LED type, 36 Watts 240 Volts lumen efficiency not less than 100 lm/Watt and accessories complete, mounted on 25 mm dia light grade GI pipe bracket 1.0 mtr long bent to shape, mounted on wall,connection complete all as specified and directed
1
-
-
... More
S&F in replacement of Street light fitting LED type, 45 Watts 240 Volts lumen efficiency not less than 100 lm/Watt and accessories complete, mounted on 25 mm dia light grade GI pipe bracket 1.0 mtr long bent to shape, mounted on wall,connection complete all as specified and directed
1
-
-
... More
S&F in replacement of Street light fitting LED type, 72 Watts 240 Volts high luminous , energy efficiency not less than 100 lm/Watt , including SPD fitting before placing the street light and accessories complete mounted on light grade GI pipe bracket 1.0 mtr long bent to shape, mounted on wall,connection complete all as specified and directed
3
-
-
... More
S&F in replacement of Street light fitting LED type, 90 Watts 240 Volts high luminous , energy efficiency not less than 100 lm / Watt , including SPD fitting before placing the street light and accessories complete mounted on light grade GI pipe bracket 1.0 mtr long bent to shape, mounted on wall,connection complete all as specified and directed
1
-
-
... More
S&F in replacement of smart bright Flood light fitting LED type, 80 Watts 240 Volts lumen efficiency not less than 100 lm/Watt , PDC housing with IP 65 flood light opties , efficient housing output LED sleek and robust design for better aesthetics , highly efficient reliable and sturdy, mounted on wall,connection complete all as specified and directed by Egineer-in-Charge
1
-
-
... More
S&F in replacement of smart bright Flood light fitting LED type, 120 Watts 240 Volts lumen efficiency not less than 100 lm/Watt , PDC housing with IP 65 flood light opties , efficient housing output LED sleek and robust design for better aesthetics , highly efficient reliable and sturdy, mounted on wall,connection complete all as specified and directed by Egineer-in-Charge
1
-
-
... More
Attending day to day street lights /Solar street lights complaints (street lights fitted on poles / buildgs at height upto 12M from ground level), repair / replacement of unsv accessories like lamps,ballast, ingnitor, drivers, capacitors, SPD , nuts, bolts, clamps etc incl sudays and holidays incl all required tools, ladders and other incidential operation requirements for execution of maint work all complete as specifed and directed. Note : (i) All the fittings of HPSV / MVL / HPL/LED / Halogen/solar street lights and flood light will be cleaned and filling of distrilled water in bettery of solar street lights once in a month or when required. The rate for which shall be deemed to be included in the qouted rate. (ii) Cost of spares and accessories will be measured and paid separately under relevent item of this schedule
(iii) Cost for taking down and re-fixing new spare parts shall be included in the unit rate qouted. (iv) Necessary T&P shall be included in the qouted rate for repair / replacement of unsv LED lights , Driver, brackets, SPD and copper conductor upto 12 mtr height street lights fitted on pole / wall
(v) Street light complaints to be carried out as per complaint basis incl sunday and holiday.
5
-
-
... More
S&F in replacement of FRP boxes with 4 connectors heavy duty, and clamps made out of FI 32 x 6mm and GI nuts, bolts , busbar chamber size 30x20 cm including provn of Aluminium Busbar SPN 30 Amps capacity fixed on porcelain insulator, 01 No MCB SP 6 Amps Capacity complete all as specified and directed
3
-
-
... More
S&F in replacement GI bracket for fixing street/ security light fitting made out of GI pipe medium grade 40 mm dia 1.50 Mtr long bent to required angle/ shape complete with MS flat iron clamp of size 50x5 mm, nut, bolt, washer of suitable size as per site requirement etc and fixed in pole/wall including two coats of aiuminium paint over a coat of red oxide primer to MS clamps , nut ,bolts etc complete all as specified and directed
2
-
-
... More
S&F in replacement GI bracket for fixing street/ security light fitting made out of GI pipe medium grade 25 mm dia 1.50 Mtr long bent to required angle/ shape complete with MS flat iron clamp of size 25x5 mm, nut, bolt, washer of suitable size as per site requirement etc and fixed in pole/wall including two coats of aluminium paint over a coat of red oxide primer to MS clamps , nut ,bolts etc complete all as specified and directed
2
-
-
... More
M & L for painting steel tubular poles 9/11 Mtr long including cross arms etc. with one coat of aluminium paint including preparation of surfaces and writing feeder name and pole number on the pole complete all as specified and directed by Engr-in-Charge
5
-
-
... More
M & L for painting RCC poles 9/11 Mtr long including cross arms etc. with one coat of white paint including preparation of surfaces and writing feeder name and pole number on the pole complete all as specified and directed by Engr-in-Charge
5
-
-
... More
M & L for repair of LT Panel board outdoor type repair/replace damaged door hinges set of three nos front and back side and legs 40x40x6mm MS angle and necessary cutting, welding & drilling hole etc.works required at site complete all as specified and directed
1
-
-
... More
S & F aluminium cables lugs for cables of size upto 10 Sqmm including necessary crimping with crimping tool complete all as specified and directed
2
-
-
... More
S & F aluminium cables lugs for cables of size upto 16 Sqmm including necessary crimping with crimping tool complete all as specified and directed
2
-
-
... More
S & F aluminium cables lugs for cables of size upto 25 Sqmm including necessary crimping with crimping tool complete all as specified and directed
2
-
-
... More
S & F aluminium cables lugs for cables of size upto 35 Sqmm including necessary crimping with crimping tool complete all as specified and directed
27
-
-
... More
S & F aluminium cables lugs for cables of size upto 50 Sqmm including necessary crimping with crimping tool complete all as specified and directed
2
-
-
... More
S & F aluminium cables lugs for cables of size upto 70 Sqmm including necessary crimping with crimping tool complete all as specified and directed
2
-
-
... More
Excavating in trenches in soft / loose soil, n.exc 1.5m wide and n.exc 1.5m in depth: for foundation, etc. Or for shafts, wells, cessapits, manholes, pier holes, etc. n.exc 10 Sq.m on plan and in.exc 1.5m in depth and getting out all as specified and directed by Engr-in-Charge
20
-
-
... More
Excavating in trenches in hard / dense soil, n.exc 1.5m wide and n.exc 1.5m in depth: for foundation, etc. Or for shafts, wells, cessapits, manholes, pier holes, etc. n.exc 10 Sq.m on plan and in.exc 1.5m in depth and getting out all as specified and directed by Engr-in-Charge
5
-
-
... More
Returning, filling in, including spreading, levelling watering and well ramming in layers n.exc.25cm in any type of soil all as specified and as directed.
22.5
-
-
... More
Removing excavated material to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above starting point in any type of soil
2.5
-
-
... More
M & L in replacement XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavyduty) with Copper conductor, 11000 volts Earthed, core, grade cross sectional area 25 sq. mm as specified and directed
65
-
-
... More
Taking up old unserviciable LT UG cables from trench/poles/wall etc of 10 Sqmm 4 Core complete all as specified and directed.
Note : Excavation, returning filling and removal of surplus soil shall be measured and paid separately under relevant item of this schedule
40
-
-
... More
All as per item No- 136.00 above but 16 Sqmm 4 core
20
-
-
... More
All as per item No- 136.00 above but 25 Sqmm 4 core
20
-
-
... More
All as per item No- 136.00 above but 50 Sqmm 3.5 core
15
-
-
... More
All as per item No- 136.00 above but 95 Sqmm 3.5 core
30
-
-
... More
All as per item No- 136.00 above but 120 Sqmm 3.5 core
60
-
-
... More
Supply and laying LT UG cable XLPE insulated armoured and PVC sheathed 1100 volts grade with aluminium conductor of 10 Sqmm 4 core all as specified and directed.
40
-
-
... More
All as per item No- 142.00 above but 16 Sqmm 4 core
20
-
-
... More
All as per item No- 142.00 above but 25 Sqmm 4 core
20
-
-
... More
All as per item No- 142.00 above but 50 Sqmm 3.5 core
15
-
-
... More
All as per item No- 142.00 above but 95 Sqmm 3.5 core
30
-
-
... More
All as per item No- 142.00 above but 120 Sqmm 3.5 core
60
-
-
... More
Supply ,laying of teleex DWC (double wall Corrugated) HDPE pipe confirming to IS 16205 (PART-24-2018) of outer dia 77 mm and inner dia 63 mm ,polyethylene including coupler,bends ,cap etc with smooth ineternal and profiled internal and profilrd external surface for non pressure under ground cable complete all as specified.Make:- Gemini/rex polyextrusion ltd or equivalent.
110
-
-
... More
Supply ,laying of teleex DWC (double wall Corrugated) HDPE pipe confirming to IS 16205 (PART-24-2018) of outer dia 120 mm and inner dia 103.5 mm ,polyethylene including coupler,bends ,cap etc with smooth ineternal and profiled internal and profilrd external surface for non pressure under ground cable complete all as specified.Make:- Gemini/rex polyextrusion ltd or equivalent.
68
-
-
... More
M&L for fixing in replacement straight through jointing kits heat shrinkable type LT UG XLPE cable heavy duty armoured sheathed and making the disturbed surface after relaying the cable and making joints suitalbe for aluminium conductor of 16 to 95 Sqmm 3.5 core complete all as specified and directed.
Note : Taking up cable, excavation, returning filling and removal of surplus soil upto 1 cum meter shall be included in the qouted rate. More than 1 cum shall be measured and paid separately under relevant items of this schedule.
1
-
-
... More
Taking down carefully copper/aluminium point wiring (light, Fan, Socket or power) complete, fitting such as switches ceiling roses, pendants, regulators, Sockets etc removing unserveciable materials at site and making good disturbed surface to match with existing finish with plaster and applying white / colour wash / OBD / CBP as per existing at site as required of walls, floors roofs etc all as specified and directed.
26
-
-
... More
M&L for point wiring with Insulated unsheathed Cable 1.5 Sqmm multistranded FRLSH copper conductor 1100 Volt grade IS-694 and drawing in and including concealed steel conduit stove enamelled medium grade suitable dia with fixing materials, sunken terminal MS boxes of 2mm thick, laminated sheet cover 3mm thick and incl provision of earth wire PVC insulated unsheathed 1.5 Sqmm stranded FRLSH copper conductor single core cable connected to common earth dolly along wall/roof including making good disturbed surface to match with existing finish with plaster and applying white / colour wash / OBD / CBP as per existing at site as required with 3 mm thick plastic laminated sheet top cover including taking down old u/s point wiring all as directed and specified by Engr in charge for the following:-
-
-
-
... More
One light/fan controlled by 5 Amp one way switch
4
-
-
... More
One 3 pin socket out let 5 Amps on the same board
3
-
-
... More
One 3 pin socket out let 5 Amps on the Independent board
5
-
-
... More
One bell/buzzer point controlled by one push button on the Independent board
2
-
-
... More
All as per item No 152 herein before but with 2.5 Sqmm single core multi standard copper conductor for one three pin socket 15 Amps on independent board including continuous earth wire PVC insulated 2.5 Sqmm copper solid conductor to common earth dolly.
2
-
-
... More
All as per item No 152 herein before but with 4 Sqmm single core multi standard copper conductor for one three pin socket 20 Amps on independent board/ metal clad socket for AC point including continuous earth wire PVC insulated 4 Sqmm copper solid conductor to common earth dolly
1
-
-
... More
M&L point wiring with 1.5 Sqmm (nominal area) PVC unsheathed multi stranded copper conductor pvc insulated 1100 volt FRLS grade multi stranded cable drawn through and including PVC casing caping/conduit ISI marked minimum 20mm size and its accessories complete along with 1.5 Sqmm cable but in green colour as continuous earthing wire and connecting to common earth dolly completely concealed ,surface, in walls/ceiling/roofs with and including 1.2 mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for mounting switches, switch socket combinations fan regulators etc., as required with 3 mm thick plastic laminated sheet top cover including taking down old u/s point wiring all as directed and specified by Engr in charge for the following.
-
-
-
... More
One light /fan/bell point controlled by one switch.
3
-
-
... More
One 5 Amps plug point independent board controlled by one switch.
1
-
-
... More
One three pin switch socket 5 Amps plug point on same board.
1
-
-
... More
All as per item No. 155 above but with 2.5 Sqmm single core multi standard copper conductor for one three pin socket 5 Amps on independent board including continuous earth wire PVC insulated 2.5 Sqmm copper solid conductor to common earth dolly.
2
-
-
... More
All as per item No. 155 above but with 4 Sqmm single core multi standard copper conductor for one three pin socket 15 Amps on independent board/ metal clad socket for AC point including continuous earth wire PVC insulated 4 Sqmm copper solid conductor to common earth dolly
2
-
-
... More
Supply and fixing in replacement of switch piano, flush button type, single pole, one way15 amps complete all as specified and directed.
24
-
-
... More
Supply and fixing in replacement of socket outlet 2-in-1, 3 pin, 5 and 15 amps, flush type complete all as specified and directed.
14
-
-
... More
Supply and fixing in replacement of bell push 5 Amps for electric Bell/Buzzer, ding dong AC 230 Volt single pole complete all as specified and directed.
2
-
-
... More
Supply and fixing in replacement of electric Bell, ding dong type AC 230 Volt single pole complete all as specified and directed.
2
-
-
... More
Supply and fixing in replacement of sheet metal enclosure with socket plug top , single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 20 to 32 Amps complete all as specified and directed.
1
-
-
... More
Supply and fixing in replacement of ceiling rose, surface bakelite 65 mm x 30 mm, 3 terminals complete all as specified and directed.
4
-
-
... More
Supply and fixing in replacement of Electronic dimmer type regulator 230 Volt step type complete all as specified and directed.
10
-
-
... More
Supply and fixing in replacement of Switch socket combination 5/6 Amps complete all as specified and directed.
4
-
-
... More
Supply and fixing in replacement of Switch socket combination 15/16 Amps complete all as specified and directed
4
-
-
... More
M&L for Sub main wiring complete with 2x1.5 sqmm, single core, multi stranded copper conductor FRLSH PVC insulated and sheathed cable 1100 Volts grade, drawn in PVC Casing Capping in surface /PVC conduit on surface (as required) along walls roofs etc including 1.5 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site including taking down old unsv sub main wiring. Note for Item No. 167.00 & 168.00 :-
(i) All three wire/cable(phase, neutral and earth) should be run through for each individual circuit from the DBs. (ii) Two run of cable and one run earth conductor and PVC Conduit be measured as one length.
15
-
-
... More
All as per item No. 167.00 above but 2X2.5 Sqmm and 1X 2.5 Sqmm for Earth wire
10
-
-
... More
Supply and fixing in replacement of PVC Gang box with 15 Amp multipurpose Switch and Socket complete all as specified and directed.
5
-
-
... More
Supply and fixing in replacement of PVC Gang box with 5 Amp multipurpose Switch and Socket complete all as specified and directed.
15
-
-
... More
Supply and fixing in replacement of Cast Iron/pressed steel terminal boxes 60 mm deep 250mm by 300mm , 3mm thick rectangular with plastic laminated sheet cover complete all as specified and directed.
2
-
-
... More
Supply and fixing in replacement of Cast Iron/pressed steel terminal boxes 60 mm deep 200mm by 150mm , 3mm thick rectangular with plastic laminated sheet cover complete all as specified and directed.
2
-
-
... More
Supply and fixing in replacement of Cast Iron/pressed steel terminal boxes 60 mm deep 175mm by 100mm , 3mm thick rectangular with plastic laminated sheet cover complete all as specified and directed.
2
-
-
... More
Taking down old /Unserviceable distribution board by disconnection of electric connection carefully SPN DBs, Main Switch including old models load star MCBs,Isolators,etc and making good to disturbed surface in all respect all as specified and directed.
4
-
-
... More
supply and fixing in replacement of double door DB SPN 4 way IP 43-IK-09 with metal double door suitable for housing of MCBs complete all as directed.
1
-
-
... More
supply and fixing in replacement of double door DB SPN 12 way IP 43-IK-09 with metal double door suitabl for housing of MCBs complete all as directed.
1
-
-
... More
supply and fixing in replacement of double door DB SPN 8way IP 43-IK-09 with metal double door suitabl for housing of MCBs complete all as directed. Make -Legrand Cat Part No -607712/Simens or equivalent make mentioned in the list of makes in PS.
1
-
-
... More
Supply and fixing in replacement of double door Flame proof DB SPN 8way IP 43-IK-09 with metal double door suitabl for housing of MCBs complete all as directed. Make -Legrand/Simens or equivalent make mentioned in the list of makes in PS.
1
-
-
... More
M&L Painting of ceiling fans 1200/1400mm sweep with two coats of synthetic enamel paint by means of suitable spary gun after cleaning and prepairing the surfaces and marking the circular ring line 3 mm thick line with golden colour on bottom centre all as specified and directed.
3
-
-
... More
M&L Painting of exhaust fan 300/450/600mm sweep with two coats of synthetic enamel paint by means of suitable spary gun after cleaning and prepairing the surfaces and marking the circular ring line 3 mm thick line with golden colour on bottom centre all as specified and directed.
5
-
-
... More
S&F in replacement Exhaust fan single phase 1400 RPM 12'' sweep heavy duty complete with louver shutter and incl fixing water proof ply wood 12 mm thick of size 350X350mm for fan base after cutting 300 mm dia of suitable size all as directed.
2
-
-
... More
S&F in replacement single phase, 230 volts, 50 Hz, wall mounted fan, 400 mm sweep fixed on wall with fan clamp/hook, connecting electrically all as specified and directed.
2
-
-
... More
S&F in replacement Ceiling Fan 1200 mm sweep single phase 230Volt AC energy saving complete as per manufactrer specification complete all as specified and directed. Note: Old unsv ceiling fan shall be deposited in MES storeyard without any extra payment.
2
-
-
... More
S&F in replacement of Padestal Fan 450 mm sweep single phase AC Energy saving complete as per manufactrer specification complete all as specified and directed.
1
-
-
... More
S&F in replacement of Bracket assembly of various sizes as required for hanging ceiling fan with rubber shackle nuts, bolts and split pin complete all as specified and directed.
5
-
-
... More
S&F in replacement condenser 2.5 mfd including fixing of clamps with screws, sleeves etc complete all as specified and directede.
20
-
-
... More
S&F in replacement condenser 3.15 mfd including fixing of clamps with screws, sleeves etc complete all as specified and directede.
10
-
-
... More
supply and fix in replacement ceiling fan blades as per existing pattern (set of three) of size 1200/1400 sweep complete all as specified and directed.
4
-
-
... More
supply and fix in replacement down rod of ceiling fan made upto 1 mtr long MS 20mm pipe medium grade including two coats of synthetic enamel paint over a coat of red oxide primer with bolts/check nuts, washers etc as per existing size and shape of fans incl New U hook with rubber reel with nut bolt and washer including drilling, threading complete all as specified and directed.
6
-
-
... More
supply and fix in replacement of canopy (set of two) for ceiling fans 1200 mm/1400 mm sweep complete all as specified and directed.
2
-
-
... More
supply and fix in replacement ceiling fan bottom cover suitable for 1200/1400 mm sweep with existing make and model complete all as specified and directed.
2
-
-
... More
supply and fix in replacement ceiling fan Top cover suitable for 1200/1400 mm sweep with existing make and model complete all as specified and directed.
2
-
-
... More
supply and fix in replacement exhaust fan blade as per existing make and model of size 300 mm sweep complete all as specified and directed.
5
-
-
... More
supply and fix in replacement wall fan blade as per existing make and model of 300 mm/450 mm sweep complete all as specified and directed.
2
-
-
... More
supply and fix in replacement wall fan blade as per existing make and model of 600 mm sweep complete all as specified and directed.
2
-
-
... More
S & F in replacement GI earth continuity conductor or main earthing lead of size 32X6 mm fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for earthing etc. as required complete all as directed.
18
-
-
... More
S & F in replacement GI earth continuity conductor or main earthing lead of size 25X4 mm fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for earthing etc. as required complete all as directed.
15
-
-
... More
ssupply and fixing in replacement of 1x 20/18 W tube rod LED suitable for 1x 20/18 T/L fittings complete all as specified and directed.
9
-
-
... More
ssupply and fixing in replacement of 1x 10 W tube rod LED suitable for 1x 10W T/L fittings complete all as specified and directed.
3
-
-
... More
S&F in replacement LED tube light fitting, 1x18/20 w, 230v. Surface and wall mounted LED batten, 2100lm PC Body tube housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver. & connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified directed by Engr in charge .
23
-
-
... More
S & F in replacement LED light fitting, mrror light 1x12 w, 230v Helios type fitted on wall/surface complete all as specified and directed.
2
-
-
... More
S & F in replacement LED light fitting, 1x33 w, 230v .2x2 recessed mounted genaral purpose squre shaped luminaire with high transmitivity diffuser suitable for office application with profiled & flat diffuser fiited on ceiling connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified directed.
1
-
-
... More
supply and fixing in replacement LED tube light fitting. flameproof type FLP-WP of T5 2x36W including integral reflector made of alluminium alloy LM6, with electronic ballast, bipin holders, connector block, etc., and all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor complete all as specified and directed.
1
-
-
... More
supply and fixing in replacement flameproof Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed.
2
-
-
... More
supply and fixing in replacement flame proof Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A,250V, 2P+earth complete all as specified and directed.
2
-
-
... More
Supply and laying in replacement of alluminium sevice wire 6sqmm 2 core 1100 volts grade fixed on wall/roof etc complete all as specified and directed.
5
-
-
... More
supply and fixing in replacement LED lamp, B 22, 9W 220V 50HZ complete all as specified and directed.
8
-
-
... More
supply and fixing in replacement LED lamp, B 22, 12W 220V 50HZ complete all as specified and directed.
10
-
-
... More
supply and fixing in replacement Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings as per existing make and model complete all as directed at site.
10
-
-
... More
S & F in replacement Fe410 W (Gde E-250) quality A for chamber ,RCC tank and heavy bracket framing Beam,tee, angle channel or flat section) including distance pieces, clests etc.
235
-
-
... More
M&L for painting to pump motor as per existing capacity including Sluice Valves, NRV etc with two coat of synthetic enamel paint of existing colour/shade or approved colour duly preparing the existing painted surfaces to the entire satisfaction of Engineer in charge.
8
-
-
... More
Supply only MCCB, 415 volts, 4 pole adjustable thermal setting type 25 KA, 63A as per existing make and model suitable complete all as specified and directed.
1
-
-
... More
Supply only MCCB, 415 volts, 4 pole adjustable thermal setting type 25 KA, 125A as per existing make and model or suitable equivalet complete all as specified and directed.
1
-
-
... More
S & F MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA complete with connection testing and commissioning complete all as specified and directed by Engr-in-charge.
2
-
-
... More
S & F MCCB 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 KA complete with connection testing and commissioning complete all as specified and directed by Engr-in-charge.
1
-
-
... More
S & F MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA complete with connection testing and commissioning complete all as specified and directed by Engr-in-charge.
3
-
-
... More
supply and fix in replacement MCB DP 63 Amps, 240 Volts, 10 kA, 'C' Curve complete all as specified and directed.
1
-
-
... More
supply and fix in replacement MCB DP 32 Amps, 240 Volts, 10 kA, 'C' Curve complete all as specified and directed.
2
-
-
... More
supply and fix in replacement MCB DP 40 Amps, 240 Volts, 10 kA, 'C' Curve complete all as specified and directed.
2
-
-
... More
Supply and fix in replacement MCB TP 40 to 63 Amps, 240 Volts, 10 kA, 'C' Curve complete all as specified and directed.
1
-
-
... More
supply and fixing in replacement of MCB TPN 6 to 32 Amps, 440 Volts, 10 kA, 'C' Curve complete all as specified and directed.
2
-
-
... More
supply and fixing in replacement of MCB TPN 40 to 63 Amps, 440 Volts, 10 kA, 'C' Curve complete all as specified and directed.
4
-
-
... More
supply and fixing in replacement of MCB SP 6 to 32 Amps, 440 Volts, 10 kA, 'C' Curve complete all as specified and directed.
7
-
-
... More
supply and fixing in replacement of MCB SP 40 to 63 Amps, 440 Volts, 10 kA, 'C' Curve complete all as specified and directed.
1
-
-
... More
Supply and fix in repalcement of Contactor 3 pole 415 volts 95 Amps adjustable type(control voltage 415 as per existing model.) all as specified and directed.
1
-
-
... More
Supply and fix in repalcement of Contactor 3 pole 415 volts 110 Amps (control voltage 415 as per existing model.) all as specified and directed.
1
-
-
... More
Supply and fix in repalcement of Contactor 3 pole 415 volts upto 30 Amps adjustable type(control voltage 415 as per existing model.) all as specified and directed.
1
-
-
... More
Supply and fix in repalcement of Contactor 3 pole 415 volts upto 70 Amps adjustable type (control voltage 415 as per existing model.) all as specified and directed.
1
-
-
... More
Supply and fix in repalcement of Contactor 3 pole 415 volts 40 Amps ML-3(control voltage 230/415 as per existing model.) all as specified and directed.
1
-
-
... More
S&F in replacement 4 pole MCX 32 / 33 contactor heavy duty with aux contacts 415 V, all as per IS, in existing AMF control panel of DG set 62.5 KVA, thorough checking, connecting with the system, testing both Auto and manual mode operation complete all as specified and directed by Engineer-in-charge.
1
-
-
... More
Supply and fix in repalcement of over load relay for 50/60 Hp motor (control voltage 415 as per existing model.) all as specified and directed.
1
-
-
... More
Supply and fix in repalcement of over load relay for 30/40 Hp motor (control voltage 415 as per existing model.) all as specified and directed.
1
-
-
... More
Supply and fix in repalcement of over load relay upto20 Hp motor (control voltage 415 as per existing model.) all as specified and directed.
1
-
-
... More
S&F in replacement Fully automatic star-Delta starter suitable for 30/40HP Motor of centrifugal pump including voltmeter, Ammeter, Indicator, OL protector, SP preventer, relay etc complete with suitable factory made sheet enclosure.
1
-
-
... More
S&F in replacement Fully automatic star-Delta starter suitable for 50/60HP Motor of centrifugal pump including voltmeter, Ammeter, Indicator, OL protector, SP preventer, relay etc complete with suitable factory made sheet enclosure.
1
-
-
... More
S & F in repair for DOL startor of capacity upto 10 HP motor fully automatic type complete all as specified and as directed.
3
-
-
... More
S & F in repair for DOL startor of capacity upto 20 HP motor fully automatic type complete all as specified and as directed.
2
-
-
... More
Disconnecting electrical connection of pump set of capacity 1 HP to 7.5 HP and taking out complete assembly with electric motor and testing the complete and refixing with new, nuts, bolts & washers and fitting the same after the following repairs as mentioned here in after all as directed by Engr- in Charge.
3
-
-
... More
M&L for re-winding of unserviceable/burnt pump set of capacity 1 HP to 7.5 HP, removing all burnt out coils, cleaning the slots and rewinding the same with supper enameled copper winding wire of same as existing gauge and reassembling, testing and commissioning of electric motor on full load for 4-6 hours continuous running of the capacity 1 HP to 7.5 HP complete in all respects to the entire satisfaction of Engr-in-Charge
5
-
-
... More
M&L Repair/Maint/servicing to Twin lobe Compressor unit single Phase,240 Volts 50 Hz, Type- SP-IH, Head 9 to 18 Meter,2800 RPM, 5 HP Make KIRLOSKAR used for back washing of filteration plant at swimming pool including oiling/greasing & provn of gland packing etc. and replacement of unserviceable parts for its smooth functioning to the entire satisfaction of Engr-in-Charge.
1
-
-
... More
Disconnecting electrical connection of Centrifugal pump set of capacity 30/40/50HP/60 HP and taking out complete assembly with electric motor, testing the complete and refixing with new, nuts, bolts,bearings, & washers and fitting the same after the repairs as mentioned here in after all as directed by Engr- in Charge.
2
-
-
... More
M&L for re-winding of unserviceable/burnt Centrifugal pump set of capacity 30/40/50/60HP HP, removing all burnt out coils, cleaning the slots and rewinding the same with supper enameled copper winding wire of same as existing gauge and reassembling , testing and commissioning of electric motor on full load for 4-6 hours continuous running of the capacity 30 /40/50/60HP complete in all respects to the entire satisfaction of Engr-in-Charge
2
-
-
... More
Supply and fix in repalcement of single phase preventer for motor of capacity upto 60 HP (control voltage 415 as per existing model.) all as specified and directed.
6
-
-
... More
Supply and fix in repalcement of connector for motor of capacity upto 60 HP (control voltage 415 as per existing model.) all as specified and directed.
5
-
-
... More
Supply and fix in repalcement of fan blade of motor of capacity upto 60 HP as per existing model. all as specified and directed.
2
-
-
... More
Supply and fix in repalcement of back side cover of motor of capacity 30/40/50/ 60 HP as per existing model. all as specified and directed.
3
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%