Military Engineer Services Tender
... More
To inquire about any e-tender the Andaman & Nicobar Islands government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder one can find every eprocurement Punjab tender on BidAssist. BidAassist has collated each and every Eproc Andaman & Nicobar Island Tender on its website. Looking for Andaman & Nicobar Island tenders online or going through the cumbersome government websites for it, has been made easier with the help of BidAssist.
Military Engineer Services - MES Tender
Civil And Construction
Water Storage And Supply
Eprocure
Opening Date11 Feb 2025
Closing Soon4 Mar 2025
Tender Amount₹ 49,50,000
Costs
EMD
₹ 99,000Document Cost
₹ 500Tender Fee
Refer Documents
Summary
Repair / Maint And Attending Water Supply Complaints For Leakages / Blockages Of Pipe Line And Raising Main Pipe Line, Valve Pit Chambers, Sluice Valves, Gate Valves And Ball Valves And Its Connected Works Maint Of Command Swimming Pool, Rain
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_697433_1Tender No
8534/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
(a) Execution and earth work in soil / mud by using machinery/labour to suitable length (Appx 10 mtrs) and forming bund with excavated soil to avoid sea / row water entering into the working area including pumping/bailing out water by using portable desal engine driven pump set. (b) Cutting of CI / DI pipe of size 200 mm bore after through inspetion for the damaged pipe line including disconnecting / dismentling.
(c ) Taking out CI/DI pipewith CI/DI specials after removing from joints/burning out joints and removing lead at both ends with the help of hydrolic crane other machinery and keeping aside fr further disposal.
(d) Cutting of new pipe into pieces as per rquirement and laying using machinery.
( e) Alinging the pipe line as per sie condition, in setting the Collar suitable for 200 mm CI/DI pipe.
(f) Attending repair work within the minimum time frame/period as specified by Engr - in - charge.
Notes for the Items
i) The unit rate is deemed to include cost of tools and plants and transprtation required for attending the repair work.
ii)Supply only CI/DI pipe shall be measured & paid for seperately under relevant item of this schedule.
iii) Extra soil required for refilling /making bunds to prevent water entering into the work place shall be deemed to include in the unit rate.
iv) Specials / rubber or fiber/ lead joints shal be measured and paid for seperately under relevent items of this schedule.
v) Old unsv CI/DI pipes, fittings, lead, nuts, bolts, washer, gaskets etc. shall become contractors property and necessary recovery as per schedule of credit shall be deducted from contractor.
-
-
-
... More
All as per item No:3.00 here-in - before but for CI/DI pipe line of size 80/100/150mm
3
-
-
... More
M&L for attending of water supply complaints for any leakage/blockage in GI /CPVC/PPR pipe lines of size 20mm/25mm bore taking up serviceable / unserviceable GI water pipe lines all fitings/fixtures from trench including supply and laying GI / CPVC tubing 20mm/25mm bore up to 1 mtr length (max) including necessary cutting, threading and replacement of unserviceable GI/CPVC fittings such as GI/CPVC socket /Nipple/union socket, Tee, Tee reducer etc. of size 20mm/25mm including necessary excavation and earth work upto 1 mtr length to repair the leakage/clearing the blockage in the pipe line and testing on completion.(Replacement of unserviceable GI fittings such as GI socket /Nipple/union socket/Tee/Tee reducer etc. shall be measured and paid for separately under relevant items of this schedule here-in-after)
40
-
-
... More
All as per item No 5.00 here-in- before but of size 40/50mm bore GI pipe line and -do-
20
-
-
... More
All as per item No 5.00 here-in-before butof size 80/100mm bore GI pipe line and -do-
8
-
-
... More
All as per item No 5.00 here-in-before but in CPVC pipe lines on wall/floor/roof of the bldg (20/25mm)
18
-
-
... More
Al as per item No 5.00 here-in-before but in CPVC pipe lines on wall/floor/roof of the bldg. (40/50mm)
4
-
-
... More
All as per item No 5.00 here-in-before but in CPVC pipe lines on wall/floor/roof of the bldg. (80/100m)
2
-
-
... More
Taking up or down old/chocked water tubing 20/25/50/80/100 mm bore with fittings from trenchs/walls cleaning for refixing in new or old position or credit to contractor all as specified and as directed.
245
-
-
... More
Supply and fix in replacement of 20mm dia CPVC pipes SDR 11 including fittings on walls/ceilings/laying in trenches complete all as specified and as directed.
40
-
-
... More
Supply and fix in replacement of 25mm dia CPVC pipes SDR 11 including fittings on walls/ceilings/laying in trenches complete all as specified and as directed.
155
-
-
... More
Supply and fix in replacement of 50mm dia CPVC pipes SDR 11 including fittings on walls/ceilings/laying in trenches complete all as specified and as directed.
50
-
-
... More
Supply and Fix CPVC male brass threaded adaptor (MTA/MBTA) suitable for 20 mm CPVC pipe Complete all as specified and directed
25
-
-
... More
Supply and Fix CPVC male brass threaded adaptor (MTA/MBTA) suitable for 25mm CPVC pipe Complete all as specified and directed
30
-
-
... More
Supply and Fix CPVC male brass threaded adaptor (MTA/MBTA) suitable for 50mm CPVC pipe Complete all as specified and directed
16
-
-
... More
Supply and Fix CPVC female brass threaded adaptor (FTA/FBTA) suitable for 20 mm CPVC pipe Complete all as specified and directed
30
-
-
... More
Supply and Fix CPVC female brass threaded adaptor (FTA/FBTA) suitable for 25 mm CPVC pipe Complete all as specified and directed
30
-
-
... More
Supply and Fix CPVC female brass threaded adaptor (FTA/FBTA) suitable for 50 mm CPVC pipe Complete all as specified and directed
14
-
-
... More
Supply and Fix CPVC tank adaptor/tank nipple suitable for 20 mm CPVC pipe Complete all as specified and directed
45
-
-
... More
Supply and Fix CPVC tank adaptor/tank nipple suitable for 25 mm CPVC pipe Complete all as specified and directed
64
-
-
... More
Supply and Fix CPVC union suitable for 20 mm CPVC pipe Complete all as specified and directed
40
-
-
... More
Supply and Fix CPVC union suitable for 25 mm CPVC pipe Complete all as specified and directed
16
-
-
... More
Supply and Fix CPVC union suitable for 50 mm CPVC pipe Complete all as specified and directed
5
-
-
... More
Supply and Fix CPVC ball valve suitable for 20 mm CPVC pipe Complete all as specified and directed
40
-
-
... More
Supply and Fix CPVC ball valve suitable for 25 mm CPVC pipe Complete all as specified and directed
48
-
-
... More
Supply and Fix CPVC brass elbow/socket suitable for 20 mm CPVC pipe Complete all as specified and directed
20
-
-
... More
Supply and Fix CPVC brass elbow/socket suitable for 25mm CPVC pipe Complete all as specified and directed
43
-
-
... More
Supply and Fix CPVC brass elbow/socket suitable for 50mm CPVC pipe Complete all as specified and directed
10
-
-
... More
S&F in replacement tubes medium grade galvanized with all fittings laid in trenches/fixed on wall/on roof etc including taking down of old u/s pipe of the following sizes :-
-
-
-
... More
(a) 20mm dia
72
-
-
... More
(b) 25mm dia
342
-
-
... More
(c) 40mm dia
62
-
-
... More
(d ) 50mm dia
112
-
-
... More
(e) 80mm dia
100
-
-
... More
(f) 100mm dia
60
-
-
... More
S&F 3- layer PP-R Polypropylene random copolymer) concea end pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches in following sizes.
-
-
-
... More
32 mm dia
12
-
-
... More
40mm dia
6
-
-
... More
50mm dia
6
-
-
... More
M&L for Ductile Iron pipes with spigot and socket ends centrifugally cast class K-9 any length, laid in trenches of following sizes :-
-
-
-
... More
(a) 80mm bore
5.5
-
-
... More
(b) 100mm bore
5.5
-
-
... More
(c) 150 mm bore
5.5
-
-
... More
(d) 200mm bore
5.5
-
-
... More
(e) 250/350/400mm bore
5.5
-
-
... More
Supply and fixing in replacement Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe fixed of the following sizes :-
-
-
-
... More
(a) 20 mm bore
6
-
-
... More
(b) 25 mm bore
19
-
-
... More
(c) 40 mm bore
6
-
-
... More
(d) 50 mm bore
2
-
-
... More
(e) 80 mm bore
2
-
-
... More
Supply and fix in replacement of flanged type Sluice valve, with hand wheel, made of CI Body with SS/ Brass spindle PN-1.6 rating, IS-14846 make Upadhyay/Kirloskar of following sizes
-
-
-
... More
(a) 80mm bore
1
-
-
... More
(b) 100mm bore
1
-
-
... More
(c ) 150mm bore
1
-
-
... More
(d) 200/250 mm bore
1
-
-
... More
( e) 350mm dia bore
1
-
-
... More
(f) 400mm dia bore
1
-
-
... More
M&L for repairing and Servicing of Sluice valve by removing the nut and taking out spindle for turning in Lathe workshop replacement of necessary spare parts and refix at original position after service complete all as specified and directed for the following sizes:-
-
-
-
... More
(a) 100/150/200/250 mm dia bore
2
-
-
... More
(b) 350/400 mm dia bore
1
-
-
... More
Supply and fix in replacement flanged Non return valve flap type, cast iron body, PN1.6,confirming with IS provision of 3mm thick rubber gasket on both sides of the flanges, bolts and nuts complete including dismantling of unserviceable valve all as directed of following sizes;
-
-
-
... More
(a) 100/150 mm dia bore
1
-
-
... More
(b) 200/250 mm dia bore
1
-
-
... More
Repairs to existing Air release valve100/150 mm dia bore by remvoing the valve and repairing the same by replacing gaskes,nut,bolts, top cover and ball refixing the same , cast iron body, on both sides of the flanges, bolts and nuts complete all as specified and as directed.
1
-
-
... More
Supply and fix in replacement of air release valve suitable for 100 mm dia pipe all as specified and directed.
1
-
-
... More
S&F in replacement, Cast Iron foot valve ball type of size 150mm, heavy duty ( confirming to relevant IS fixing with provision of new rubber flange gasket, nut, bolt, double washer, etc., complete including dismantling of unserviceable valve from UG sump all as specified and as directed. Make : Normax,Kirlosker or equivqlent.
1
-
-
... More
All as per item no 40.00 but 200 mm dia
1
-
-
... More
All as per item no 40.00 but 250 mm dia
1
-
-
... More
S&F in replacement of Gun Metal Foot valve 50/80 mm bore complete all as specified and as directed by Engr-in-Charge
1
-
-
... More
S&F in replacement of Butter fly valve Flange type suitable for 200/250mm bore with rubber gaskets, nut and bolts of suitable size, ISI marked conforming to IS-13095 complete including dismantling of unserviceable valve all as directed.
1
-
-
... More
S&F mechanical joint suitable for spigot and socket pipes and fittings for the following size as specified and directed by Engr-in-charge
-
-
-
... More
(a) 80/100mm
1
-
-
... More
(b ) 150mm
1
-
-
... More
(c ) 200/250/350mm
1
-
-
... More
S&F in replacement of CI/DI Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot or flanged) collars, caps and plugs upto 400 mm bore ISI Marked all as specified and directed by Engr-in-Charge
120
-
-
... More
Supply and fix in replacement Union socket/Nipple 6",8",12" GI medium grade Make Bansal/Jindal/Tata of following sizes :-
-
-
-
... More
(a) 20/25mm bore
40
-
-
... More
(b) 40/50mm bore
40
-
-
... More
(c ) 80mm bore
10
-
-
... More
S&F in replacement joint with rubber or fiber board gasket (flange joints) suitable for flanged pipes and fittings of the following sizes :-
-
-
-
... More
(a) 80mm bore
4
-
-
... More
(b) 100mm bore
4
-
-
... More
(c ) 150mm bore
6
-
-
... More
S & F in replacement of GI Tee Reducers medium grade Make Bansal/Jindal/Tata of the following sizes :-
-
-
-
... More
(a) 40x40x20mm
6
-
-
... More
(b) 40x40x25mm
4
-
-
... More
(c) 50x50x20mm
5
-
-
... More
(d) 50x50x25mm
3
-
-
... More
S&F Gland packing 12.5mm/10mm dia / thick Make Champion / equivalent for sluice valve / pumps, leakage rectification.
6
-
-
... More
Supply and fix nuts,bolts, washers for valves and pump sets of various grade as required.
4
-
-
... More
Supply only TDS/chlorine test for pump house to check TDS valve
2
-
-
... More
Supply only Orthotodiline chemical solution for Chlorine checking
1
-
-
... More
Supply & fix in replacement of suction sweeping brush kit of SS/MS with provsn for connection PVC pipe for in and out along with tyre wheel and nylon brush with suitable size and length of nylon rope for moving of the sweeper all as specified and directed by Engr-In-charge.
1
-
-
... More
Supply & fix in replacement PVC flexible spiral type hose pipe heavy duty 40/50 mm Dia. (as per sample)
30
-
-
... More
Supply & fix in replacement rope for suction swipper motor, dia of rope as per existing sample on site complete all as specified and directed. (as per sample)
50
-
-
... More
S&F in replacement rubber (star) coupling of existing size for suitable 40HP/50HP/60/125/165/170HP pump set all as specified and directed at site
6
-
-
... More
S&F in replacement MS coupling of existing size suitable for 40HP/50HP/60HP pump as per site requirement all as specified and directed by engineer in charge
4
-
-
... More
M & L in replacement of MS coupling with rubber( spider type) L-276 suitable for 165 /125/100 HP pump sets complete all as specified and as directed..
1
-
-
... More
S & F in replacement insulation rubber mat of size 1x2 mtr in black colour, 19 mm thick confirming to IS 15652/IE 61111 of suitable size all as specified and directed to the entire satisfaction of Engr-in-charger
1
-
-
... More
Repair/ Maint of masonry pit of existing size (internal) for sluice valves with sub PCC block wall straight or curved radius built in CM 1:6 PCC 1:3:6 in foundation, 15 mm thick plaster in CM 1:4 on internal faces of walls, 40 mm thick, PCC 1:2:4 in floors including valve pit cover made out of MS sheet 2 mm thick with angle iron 40x40x6 mm frame with fixing hinges, locking arrangements, hold fasts and handle etc duly painted with two coats of synthetic enamel paint over a coat of red oxide primer including necessary excavation & earth work complete all as including demolition of existing broken valve pit chamber complete in all respects to the entire satisfaction of Engr-in-Charge Note : MS sheet will be measured and paid seperately under relevant item of the schedule.
1
-
-
... More
Excavating in trenches in soft / loose soil, n.exc 1.5m wide and n.exc 1.5m in depth: for foundation, etc. Or for shafts, wells, cessapits, manholes, pier holes, etc. n.exc 10 Sq.m on plan and in.exc 1.5m in depth and getting out all as specified and directed by Engr-in-Charge
12
-
-
... More
Excavating in trenches in hard / dense soil, n.exc 1.5m wide and n.exc 1.5m in depth: for foundation, etc. Or for shafts, wells, cessapits, manholes, pier holes, etc. n.exc 10 Sq.m on plan and in.exc 1.5m in depth and getting out all as specified and directed by Engr-in-Charge
3
-
-
... More
Returning, filling in, including spreading, levelling watering and well ramming in layers n.exc.25cm in any type of soil all as specified and as directed.
13.5
-
-
... More
Removing excavated material to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above starting point in any type of soil
1.5
-
-
... More
M & L for precast cement concrete 1:2:4 type B2 using 40 mm graded stone aggregates as in mass concrete/foundation/for supporting (encasing) of DI pipes of any size and in any position including plastering of surfaces complete all as specified and directed
0.5
-
-
... More
M & L for precast cement concrete 1:3:6 type B1 using 20 mm graded stone aggregates as in mass concrete/foundation/for supporting (encasing) of DI pipes of any size and in any position including plastering of surfaces complete all as specified and directed
0.5
-
-
... More
M&L for testing of water samples and obtain the test result for the perametrs as per IS 10500 like TDS,Colour,odour,TSS,PH,coliform turbidity,etc by carrying physical,chemical,microbiology examiniation from any govt authoarised /NABL approved laboratary complete all as specified and as directed by Engr-in-Charge. Note :(i) Source/location of water samples shall be decided by the Engineer-In-Charge. (ii) Test test report shall be submitted by the contractor along with RAR/FB for payment of this item
5
-
-
... More
M&L in replacement for MS sheet (3.15)mm thick) for valve chamber cover/cable duct cover with plates of Fe 410W, Gde E-250, quality -A (Plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment with riveted, bolted or welded attachment for locking arrangements complete including painting with two coat of synthetic enamel paint black colour/shade over a coat of red oxide primer complete all as specified and directed by Engr - in - Charge
336
-
-
... More
S & F in replacement Fe410 W (Gde E-250) quality A for chamber ,RCC tank and heavy bracket framing ( Beam,tee, angle channel or flat section) including distance pieces, clests etc.
235
-
-
... More
M&L for painting to pump motor as per existing capacity including Sluice Valves, NRV etc with two coat of synthetic enamel paint of existing colour/shade or approved colour duly preparing the existing painted surfaces to the entire satisfaction of Engineer in charge.
25
-
-
... More
M&L for painting to CI/DI/MS pipe as per existing capacity with two coat of synthetic enamel paint of existing colour/shade or approved colour duly preparing the existing painted surfaces to the entire satisfaction of Engineer in charge.
200
-
-
... More
Takng down old unservicable cable and Supply and Laying in replacement of XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 120x3.5 C sqmm, laid in trenches/floor or fixed on wall/pole complete all as specified.
20
-
-
... More
Takng down old unservicable cable and Supply and Laying in replacement of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire unarmoured, electric power cables (heavyduty) with Copper conductor, 1100 volts Earthed, 3 core, grade cross sectional area 25 sqmm as specified and directed
30
-
-
... More
S&F in replacement Fully automatic star-Delta starter suitable for 30/40/50/60HP Motor of centrifugal pump including voltmeter, Ammeter, Indicator, OL protector, SP preventer, relay if required on site complete with suitable factory made sheet enclosure.
1
-
-
... More
S&F in replacement Fully automatic star-Delta starter suitable for 125/170HP Motor of centrifugal pump including voltmeter, Ammeter, Indicator, OL protector, SP preventer, relay if required on site complete with suitable factory made sheet enclosure.
1
-
-
... More
S & F in repair for DOL startor of capacity upto 10 HP motor fully automatic type complete all as specified and as directed.
1
-
-
... More
S & F in repair for DOL startor of capacity upto 20 HP motor fully automatic type complete all as specified and as directed.
1
-
-
... More
Supply and fix in repalcement of Contactor 3 pole 415 volts 95 Amps adjustable type(control voltage 415 as per existing model.) all as specified and directed.
1
-
-
... More
Supply and fix in repalcement of Contactor 3 pole 415 volts for motor upto capacity 170 Hp (control voltage 415 as per existing model.) all as specified and directed.
1
-
-
... More
Supply and fix in repalcement of Contactor 3 pole 415 volts upto 70 Amps adjustable type (control voltage 415 as per existing model.) all as specified and directed.
1
-
-
... More
Supply and fix in repalcement of over load relay for 30/40/50/60/125/170 Hp motor (control voltage 415 as per existing model.) all as specified and directed.
1
-
-
... More
Supply and fix in repalcement of single phase preventer for motor of capacity upto 170 HP (control voltage 415 as per existing model.) all as specified and directed.
1
-
-
... More
Supply and fix in repalcement of connector for motor of capacity upto 170 HP (control voltage 415 as per existing model.) all as specified and directed.
1
-
-
... More
Supply and fix in repalcement of fan blade of motor of capacity upto 170 HP as per existing model. all as specified and directed.
1
-
-
... More
Supply and fix in repalcement of back side cover of motor of capacity 30/40/50/ 60/125/170 HP as per existing model. all as specified and directed.
1
-
-
... More
M & L for replacement of ball bearings of reduction gear box of lime/flash mixture and alum dosing unit at Prothrapur filteration plant complete all as specified and as directed. Make: SKF or as per site requirement as approved by GE
1
-
-
... More
M & L for replacement of ball bearings of reduction gear box of clarifloculator bridge motor at Prothrapur filteration plant complete all as specified and as irected.Make: SKF or as per site requirement as approved by GE
1
-
-
... More
M & L in replacement lugs upto 35 sqmm, copper conductor suitable for all 40HP/50HP/60HP as specified and directed by Engr in charger at site
17
-
-
... More
M&L for repair / maintenance to Decrin dozing pump including replacement of UNSV spare parts Rotor assy with bearings bracket, Pump tube,Injection check valve 3/8",Weighted suction line strainer 3/8",Connecting nut 3/8" with adopter,Ferrule 1/4" etc which will required on site and testing on completion for its smooth functioning to the entire satisfaction of Engr-in-Charge .
1
-
-
... More
Supply & fix dosing pipe as per site requirement complete all as specified and directed
30
-
-
... More
Disconnecting electrical connection of pump set of capacity 1 HP to 7.5 HP and taking out complete assembly with electric motor and testing the complete and refixing with new, nuts, bolts & washers and fitting the same after the following repairs as mentioned here in after all as directed by Engr- in Charge.
3
-
-
... More
M&L Repair/Maint/servicing to Twin lobe Compressor unit single Phase,240 Volts 50 Hz, Type- SP-IH, Head 9 to 18 Meter,2800 RPM, used for back washing of filteration plant at swimming pool including oiling/greasing & provn of gland packing etc. and replacement of unserviceable parts for its smooth functioning to the entire satisfaction of Engr-in-Charge.
1
-
-
... More
Disconnecting electrical connection of Centrifugal pump set of capacity 50HP/60/125/165/170 HP and taking out complete assembly with electric motor, testing the complete and refixing with new, nuts, bolts,bearings, & washers and fitting the same after the repairs as mentioned here in after all as directed by Engr- in Charge.
1
-
-
... More
M&L in repair of chemical dosing pump reciprocating mechanicaly actuated diaphragm type for dosing of liquid products 0.5 HP 440 Volts AC 1440 RPM motor complete with 100 ltrs per hour capacity inluding indicator and agitaor (1280 rpm) all as per direction of Engr-in-Charge
1
-
-
... More
Dismantling and taking out the existing mono block / centrifugal/ Submersible type pump set, by disconnecting suction and delivery pipe lines of pump set , separate the motor from the pump, removing the burnt out winding from the slot cleaning the stator and rotor with CTC and smooth sand paper and rewinding the motor with suitable gauge of size with super enameled copper conductor and insulating by using class 'B' insulation keeping for drying, connecting electric connection, testing and commissioning to its satisfactory of Engr-in-Charge complete all as directed for the following capacity :-
-
-
-
... More
(a) Capacity upto 100/125 HP pump set
1
-
-
... More
(b) Capacity upto 165/170HP pump set
1
-
-
... More
Disconnecting and taking out Monoblock/Centrifugal/submersible motor pump capacity upto 7.5 HP capacity, pump set overhauling, greasing, cleaning and after completion aligning the motor in proper position and painting with one coat of anti corrosive paint including preparation of old surface including testing and commissioning for smooth running condition upto the satisfaction of Engr-in-Charge complete all as specified and as directed by Engr-in-Charge
1
-
-
... More
All as per item No 98.00 above but of capacity 10/15/20 HP pump complete all as specified and as directed by Engr-in-Charge
1
-
-
... More
All as per item No 98.00 above but of capacity 30/40 HP pump complete all as specified and as directed by Engr-in-Charge
1
-
-
... More
All as per item No 98.00 above but of capacity 50/60 HP pump complete all as specified and as directed by Engr-in-Charge
1
-
-
... More
Dismantling and taking out the existing mono block / centrifugal/ submersible type pump set, by disconnecting suction and delivery pipe lines of pump set , separate the motor from the pump, removing the burnt out winding from the slot cleaning the stator and rotor with CTC and smooth sand paper and rewinding the motor with suitable gauge of size with super enameled copper conductor and insulating by using class 'B' insulation keeping for drying, connecting electric connection, testing and commissioning upto the satisfaction of Engr-in-Charge complete all as directed for the following Capacity Upto 7.5 HP Pump Set.
1
-
-
... More
All as per item No 102.00 above but of capacity 10/15HP pump set complete all as specified and as directed by Engr-in-Charge
1
-
-
... More
All as per item No 102.00 above but of capacity 20HP pump set complete all as specified and as directed by Engr-in-Charge
1
-
-
... More
All as per item No 102.00 above but of capacity 30/40HP pump set complete all as specified and as directed by Engr-in-Charge
1
-
-
... More
All as per item No 102.00 above but of capacity 50/60HP pump set complete all as specified and as directed by Engr-in-Charge
1
-
-
... More
M&L to carry out periodical repair / maint of RO filtration plant of capacity 1000 ltrs per hour for its smooth functioning comprising the following equipments / plants including replacement of filter media, carbon media, membrane and micro filter etc including cleaning of 04 Nos PVC service tanks of 5000 ltr capacity each, and testing on completion for leakage to the entire satisfaction of Engr-in-Charge all as specified and directed Note:- The cost of parts / items to be replaced shall be measured and paid for separately under relevant items of this schedule here-in-after as supply only and cost of fixing charges including replacement of small parts such as screws, nut bolt and washers etc., are deemed to be included in this item
1
-
-
... More
M&L for two coat of oil base paint and subsequently second coat on external surface of Over head tank including necessary tools and plants i.e. scaffolding,safety belt,and other safety equipment which will required at site for painting, with surface cleaning berfore execution of the work all as specified and as directed at site to the entire satisfaction of Engineer in charge. (i) Upto 50000 gallon OHT
2
-
-
... More
Supply only for different size of filter media capacity 1000 LPH operating pressure 3.0 Kg/cm2 complete all as specified and as directed by Engr-in-Charge
1
-
-
... More
Supply only for different size of activated carbon media/ sand media (ASF/MSF) of capacity 1000 LPH" operating pressure 2.5 Kg/cm2, type of media Activated Carbon 900IV, Micron rating-10/5 Micron complete all as specified and as directed by Engr-in-Charge
1
-
-
... More
Supply and fixing replacement Membrane of size 2x500 of capacity 1000 ltrs/hr as per existing filter in RO Plant along with rubber ring complete complete all as specified and as directed by Engr-in-Charge
1
-
-
... More
M&L for two coat of oil base paint and subsequently second coat on external surface of Semi UG Sump including necessary tools and plants for painting, with surface cleaning berfore execution of the work all as specified and as directed at site to the entire satisfaction of Engineer in charge. (i) Upto 2 Lakh gallon UG sump
4
-
-
... More
M&L for cleaning and sterilization inside the RCC/ PVC water storage tank of capacity not exceeding 500 Ltr of any description and in any position comprising following cleaning and sterilization of water tanks through bacteriological treatment by using chlorine (I) CONTRACTOR WILL BE RESPONSIBLE FOR RECTIFICATION OF COMPLAINTS OCCURRED DURING CLEANING THE TANK i;e. NO WATER IN TANK/OVER FLOW DUE TO BROKEN OF FLOAT VALVE,TANK COVER, BLOCKAGE IN PIPE LINE TO BE INCLUDED IN QUOTED RATE. Make: RAYS CLEANTECH/ HAPPY TANK/ SATYA ENTERPRISE.
150
-
-
... More
M&L for cleaning and sterilization inside the RCC/ PVC water storage tank of capacity not exceeding 1500 Ltr through bacteriological treatment by using chemical compound & removing all muddysludge & foreign particles from the tank and drain the tank with suction wiper making it dry and treating it with ulteravoilet rays.Note:CONTRACTOR WILL BE RESPONSIBLE FOR RECTIFICATION OF COMPLAINTS OCCURRED DURING CLEANING THE TANK i;e. NO WATER IN TANK/OVER FLOW DUE TO BROKEN OF FLOAT VALVE,TANK COVER, BLOCKAGE IN PIPE LINE TO BE INCLUDED IN QUOTED RATE. Make: RAYS CLEANTECH/ HAPPY TANK/ SATYA ENTERPRISE.
200
-
-
... More
M&L for cleaning and sterilization inside the RCC/ PVC water storage tank of capacity not exceeding 2000 Ltr through bacteriological treatment by using chemical compound & removing all muddysludge & foreign particles from the tank and drain the tank with suction wiper making it dry and treating it with ulteravoilet rays.Note:CONTRACTOR WILL BE RESPONSIBLE FOR RECTIFICATION OF COMPLAINTS OCCURRED DURING CLEANING THE TANK i;e. NO WATER IN TANK/OVER FLOW DUE TO BROKEN OF FLOAT VALVE,TANK COVER, BLOCKAGE IN PIPE LINE TO BE INCLUDED IN QUOTED RATE. Make: RAYS CLEANTECH/ HAPPY TANK/ SATYA ENTERPRISE.
4
-
-
... More
M&L for cleaning and sterilization inside the RCC/ PVC water storage tank of capacity not exceeding 5000 Ltr through bacteriological treatment by using chemical compound & removing all muddysludge & foreign particles from the tank and drain the tank with suction wiper making it dry and treating it with ulteravoilet rays.Note:CONTRACTOR WILL BE RESPONSIBLE FOR RECTIFICATION OF COMPLAINTS OCCURRED DURING CLEANING THE TANK i;e. NO WATER IN TANK/OVER FLOW DUE TO BROKEN OF FLOAT VALVE,TANK COVER, BLOCKAGE IN PIPE LINE TO BE INCLUDED IN QUOTED RATE. Make: RAYS CLEANTECH/ HAPPY TANK/ SATYA ENTERPRISE.
4
-
-
... More
M&L for seven stage cleaning and sterilization of inside the RCC/ Steel Underground/semi underground/Sedmentation/clear water sumps of capacity UG sump reservoir 200000 gallons through bacteriological treatment by using chemical compound TERBAC G5/Inchor-5/NB-10/ TERBAC-G-65/ Inoxi-60/NB-69/Alstasan Silvox AND ULTRA VIOLET RAY. Make: rays Cleantech/ Happy tank/ satya enterprise. (a). First Stage is to drain out the water by using exit valve or high capacity dewatering system. (b). Second stage is cleaning all the algae formation inside the tank by using TERBAC G 65/Alstansan Silvox/ Inoxi-60/NB-69 a laboratory tested branded chemical of the company ans scrubbing the walls of the tanks. (c). Third strage is fresh water cleaning by high speed jet pump. (d). Fourth stage and first bacteria screening is decertification by using TERBAC-G5/ Inohor-5/NB-10/ Alstasan Silvox a Govt Laboratory certified branded compound. (e). Fifth stage is cleaning the floor of water tank by industrial vaccum cleaner. (f) . Sixth stage is the second bacteria screening and sterilizing method by using ultra violet ray within the tank and kills all suspended bacteria. (g) Seventh stage of cleaning and third bacteria screening is to sterilize the floor of the water tank by using laboratory certified, branded strong oxidizing agent TERBAC-G65/Inoxi-60/NB-69/Alstasan Silvox . NOTE:-(i) COMPANY WILL SUBMIT GOVERNMENT LABORATORY TEST CERTIFICATE OF TERBAC-G5/INCHOR-5/NB-10/Alstasan Silvox, TERBAC-G65/ INOXIi-60/NB-69, BEFORE CLEANING, FIX THE STICKER MENTIONING THE DATE OF CLEANING & NAME OF SITE AND ALSO PROVIDE CERTIFICATE CONFIRMING THE COMPLETION OF STERILIZATION OF WATER TANKS MENTIONING THE NAME OF STATION AND DATE OF CLEANING. ALL THE CLEANING & STERILIZATION STAFFS SHOULD BE UNDER ACCIDENTAL INSURANCE COVERAGE.) (ii) OUTLET PIPE OF OHT SHOULD BE PLUGGED BEFORE CLEANING THE OHT TO AVOID.ENTERING SCALES AND THE SAME SHALL BE RECONNECTED AFTER CLEANING THE OHT AND THE QUOTED RATE IS DEEMED TO BE INCLUDE FOR THE PROVISION . (III) STERILIZATION TEAM WILL BE COMPRISED OF AT LEAST 30% MEMBERS WHO ARE MINIMUM 03 MONTS CERTIFICATE HOLDER IN WATER TANKS STERILIZATION. (IV) CONTRACTOR WILL BE RESPONSIBLE FOR RECTIFICATION OF COMPLAINTS OCCURRED DURING CLEANING THE TANK I;E. NO WATER IN TANK/OVER FLOW DUE TO BROKEN OF FLOAT VALVE/ BLOCKAGE TO BE INCLUDED IN QUOTED RATE. NOTE:-THE WORK SHALL BE CARRIED THROUGH SPECILIZED AGENCY RAYS CLEANTECH/ HAPPY TANK/ SATYA ENTERPRISE.
1
-
-
... More
All as per ser item No 117.00 above but for of inside OVER HEAD reservoir/UG sump capacity 50000 gallons through bacteriological treatment by using TERBAC G5/Inchor-5/NB-10/ TERBAC-G-65/ Inoxi-60/NB-69/Alstasan Silvox AND ULTRA VIOLET RAY. Make: RAYS CLEANTECH/ HAPPY TANK/ SATYA ENTERPRISE.
2
-
-
... More
All as per ser item No 1 above but for of inside OVER HEAD reservoir/UG sump capacity 30000 Gallons through bacteriological treatment by using TERBAC G5/Inchor-5/NB-10/ TERBAC-G-65/ Inoxi-60/NB-69/Alstasan Silvox AND ULTRA VIOLET RAY. Make: RAYS CLEANTECH/ HAPPY TANK/ SATYA ENTERPRISE.
1
-
-
... More
S&F in replacement Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed ( Minimum weight 20mm - 210gms / 25mm - 455 gm) Make Prayag/Polytuf all as specified and directed by Engr-in-Charge.
-
-
-
... More
(b)20mm bore
70
-
-
... More
(b)25mm bore
70
-
-
... More
(c )40mm bore
15
-
-
... More
S&F in replacement of Rotational moulded polyetheylene (HDPE) food grade Water Tanks, Cylindrical & Vertical Type, Triple/5 layer layered, ISI marked,with threded type lid, hoisted and fixed in position including all fittings i.e.tank nipple , ball valve for washout and outlet,upto 5 mtr GI/PVC pipe as required on site and provision of 40mm / 25 /20 mm dia CPVC spouts for connecting inlet, outlet, over flow and washout pipes complete including taking down old tanks complete all as specified and as directed of following capacities :-
-
-
-
... More
(a) 500 Ltr capacity
12
-
-
... More
(b) 1000 Ltr capacity
68
-
-
... More
(c) 2000 Ltr capacity
3
-
-
... More
(d) 5000 Ltr capacity
1
-
-
... More
S&F in replacement PVC tank cover suitable for service over head tank including necessary fixing arrangements of following capacity
-
-
-
... More
(a) 500/750 /1000 ltr capacity
120
-
-
... More
(b)1500/2000 ltr capacity
10
-
-
... More
( c) 5000 ltr capacity
8
-
-
... More
S&F in replacement of heavy duty brass float valve with brass assembly of size 20/25 mm with Ball valves high pressure of PTMT and fixed (all as specified and directed by Engr-in-Charge.
4
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%