Military Engineer Services Tender

M&L precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) complete all as specified and as directed by Engineer-in-Charge.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engineer-in-Charge.

M & L for rendering to concrete or block masonry surfaces or surfaces other than fair faces of brick surfaces, 10mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of primer and including applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth all complete all as specified and as directed by Engineer in charge

Complete removal of existing treatment and treating with two coats of oil bound distemper over a coat of primer to wall surfaces incl preparation of old surface of wall all as directed by the Engineer-in-charge and as per manufacturers instructions.

M & L for preparation of old steel surfaces exc 10cm width and girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge.

M&L Roof trusses (framed), trusssed, purlings, crane gantries, rails and fasternings and heavy breacket frasming (Beam, tee, angle, Channel, hollow sec or flat sections) including distance pieces, cleates, gusset paltes etc Fe 410-w grade E-250 quality A complete all as specified and as directed by Engineer-in-Charge.

S& F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walkways; railings; framework of water tanks/water staging and similar work conforming to Fe.410 W (Gde E 250 Quality B) complete all as specified and as directed by Engineer in charge

S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410 W (Grade E-250) quality A complete all as specified and as directed by Engineer in charge.

M&L for preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.

Dismantling of plain or corrugated steel sheeting any gauge thickness or similar pattern roof coverings complete all as specified and as directed by Engineer-in-Charge.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instruction complete all as specified and as directed by Engineer-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing complete all as specified and as directed by Engineer-in-Charge.

M & L for Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and as directed by Engineer-in-Charge.

S&F aluminium flat 40 X 6mm size as wind tie fixed with 50mm/75mm aluminium self tapping screws complete all as specified and as directed by Engr-in-Charge.

Excavation in trenches not exc 1.5m in wide and not exc 1.5 m in depth and getting out in hard/dense soil for laying of cables complete all as specified and as directed by Engr-in-Charge.

Returning, filling in, including spreading , levelling, watering and well ramming in layers not exc 25cm in soft / disintegrated rock complete all as specified and as directed by Engr-in-Charge.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed by Engr-in-Charge.

S & F Citycube P bollard Light of rating 8.5watts , 500 lm, 6500 CCT symmetric optic input voltage 140-270V class I ,0.95 power factor ,LM6 pressure Die cast AI,IP 65,IK 10,wall bracket of dimension 177x215x700, IEC 60598 complete .with IP 65 , 240 volt, protection high quality integrated LEDs assuring soothing warm white light. including all necessary excavation works,PCC base/ copping work,painting including GI pipe for maintain to suitable height as per site, wiring , clamps, nut and bolts for mounting accessories etc complete all as specified and as directed by Engr-in-Charge. Make-Phillips Cat part No-BCP400LED05P CW PSU GR S1

Supply, laying and jointing in trenches / passing through pipes/ fixing on poles/fixing on wall with saddles LT under ground cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 16 Sqmm, 4 core including including cable connecting lugs, glands, jointing fixing materials complete all as specified and as directed by Engr-in-Charge. [Note : Necessary earthwork shall be measured and paid separately].

Supply, laying of Telerex DWC (double Wall corrugated) HDPE pipe ISI marked of outer dia of 40 mm and inner dia 30 mm polethylene including couplers, bends, cap etc., with smooth internal and profiled external surface for non pressure under ground cable complete all as specified and as directed by Engr-in-Charge.

M&L for earthing complete with Galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25m deep below GL) with top edge of earth plate not less than 1.5m below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanized earth strip 32 x 6 mm size connected by means of bolts, nuts, check nuts and washer of galvanized iron or steel, provision of 40 mm dia GI pipe medium grade for protection of GI earth strip and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type CI chamber. MS funnel, wire gauge. 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos. 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I. Note: (i) Cost of GI earth lead and GI protection pipe upto 7.5m length shall be deemed to be included in the rate quoted for this item.(ii) The unit rate shall also includes for Wire mesh, funnel, excavation, returninng & filling, PCC chamber pit, RCC cover & test point.(iii) All accessories required for galvanised steel plate electrode required, as specified and as directed.

Supply and Fix wall mounted street lights control panel heavy duty metallic cabinet outdoor type enclosure (Box type) made out of CRCA sheet 3.15 mm thick totally enclosed with front opening, with projected an raised platform of suitable size weather and vermin proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, strickering of Switch gear about load termination, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS: 8623 with necessary arrangement including timer single phase load 16kw with inbuilt astronomical timer switch contactor 65 amp with MCB SPN ,digital Ammeter,voltmeter, indicating lamp R Y B including complete powder coating, necessary internal electric connection and PCC foundation as required and all as specifed and directed by Engineer in Charge.

Supply & fixing IP 66 thermoplastic-polycarbonate cable junction box of size 205X255X112 with terminal which is totally shock proof, water proof, halogen free, silica and having internally embedded gasket technology fixing on pole / surface / frame with the help of GI clamp of required size / self drill screw ,one no of MCB SP 6 Amp and four way Connector complete all as specified and as directed by Engineer-in -charge.