Military Engineer Services Tender

To inquire about any e-tender the Andaman & Nicobar Islands government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder one can find every eprocurement Punjab tender on BidAssist. BidAassist has collated each and every Eproc Andaman & Nicobar Island Tender on its website. Looking for Andaman & Nicobar Island tenders online or going through the cumbersome government websites for it, has been made easier with the help of BidAssist.

Military Engineer Services - MES Tender

Works
Civil And Construction
Civil Works Others
Eprocure
Opening Date6 Dec 2024
Closing Soon10 Jan 2025
Tender Amount₹ 65,90,000 
Notes
Download

Costs

Summary

81114 Special Repairs To Bldg No P-161 Of Ge (p) North Under Ge Minniebay, Port Blair

Description

lockUnlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

lockUnlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Promotion Banner

BOQ Items

... More
DO_NOT_SHOW

-

-

-

lockView all details for FREE
... More
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. Note:- Gunny bags filled with sand shall be laid on the ground and necessary arrangements shall be made to avoid any damage to the ground floor without any extra cost to Govt.

1500

-

-

... More
Demolition of brick/PCC block masonry built in CM complete all as specified and directed.

20

-

-

... More
Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work complete all as specified and directed by Engineer-in Charge. Note :- Holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.

114

-

-

... More
Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 Sqm and not exceeding 4.0 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work complete all as specified and directed by Engineer-in Charge. Note :- Holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.

23

-

-

... More
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings in roof coverings complete all as specified and as directed.

120

-

-

... More
Dismantling structural steel work including doors, gates but excluding framed truss etc. etc complete all as specified and directed.

1.5

-

-

... More
Dismantling false ceiling board or insulation board etc, any thickness including snap grid frame complete all as specified and as directed.

210

-

-

... More
Dismantling of wall panelling of any description in any position complete all as specified and directed.

70

-

-

... More
Taking up or down 25 /32 mm bore tubing and connections and removing off the site complete all as specified and directed by Engineer-in-charge.

70

-

-

... More
Taking up or down 20 mm bore tubing and connections and removing off the site complete all as specified and directed.

35

-

-

... More
Dismantling cast iron /PVC pipes fixed to walls or laid in trenches complete all as specified and directed by Engineer-in-charge.

89

-

-

... More
Dismantling water tanks and removing to store exc 250 ltrs and n exc 500 ltrs complete all as specified and directed.

4

-

-

... More
Cutting through holes into through cement concrete slabs chajjas etc reinforced or other wise exc 100 cm2 but n. exc 250.00 cm2 complete all as specified and directed by Engineer-in-charge.

5

-

-

... More
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed by Engineer-in-charge.

1

-

-

... More
M&L for TMT (CRS) bars 5 mm to 10 mm dia in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. (Note:- Gunny bags filled with sand shall be laid on floor during reinforcement work and l necessary arrangements will be done so that ground floor should not damage at no extra cost.)

50

-

-

... More
M&L for RCC with type B-1 (20 mm graded stone aggregate) as in chajjas complete all as specified and as directed.

1

-

-

... More
M&L for formwork to chullah hoods, chajjas, troughs and similar items including edges for finished rough complete all as specified and as directed.

15

-

-

... More
M&L for form work to edges of concrete flats, breaks, concrete railing n. exc 200mm wide for rough finished concrete complete all as specified and as directed.

10

-

-

... More
M&L for rendering 15mm thick cement plaster on fair faces of concrete block masnory in two layers, base layer 10mm thick in CM (1:6) and top layer 5mm thick in CM 1:4 (with river sand) mixed with WPC as per manufacturer' s instructions, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. Note :- WPC shall be measured and paid seperately under relevant item.

650

-

-

... More
Supply only integral water proofing compound complete all as specified.

30

-

-

... More
Taking down existing roof treatment and cleaning with wire brush to remove all loose particles including loose cement mortar or concrete and washing with water including removing the debris upto 100m distance complete all as specified and directed by Engineer-in-charge.

250

-

-

... More
M&L for plain cement concrete with type B-1 1:2:4 (using 20 mm graded stone aggregate) avg thickness 25mm in roof padding concrete, kerbs or mud stops or rounded or chamfered on edge mixed with WPC as per manufacturer's instruction complete all as specifed and directed.

250

-

-

... More
M&L for 15 mm thick screed bed in CM 1:3 as in roof surfaces mixed with WPC as per manufacturer's instruction complete all as specified and as directed.

250

-

-

... More
S&F for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and as directed .

250

-

-

... More
S&F for applying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and as directed by Engineer-in-charge.

250

-

-

... More
M&L for preparation of any surface as directed over the roof and applying two coats of aluminium paints complete all as specified and as directed by Engineer-in-Charge.

250

-

-

... More
S&F aluminium flat as wind tie fixed with 50mm/75mm aluminium self tapping screws complete all as specified and as directed.

30

-

-

... More
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified

0.5

-

-

... More
M&L for Mild steel frame work such as grills, grating etc. with ends of bars shouldered and or riveted, or forged into spikes,framed guard bars, barred iron doors, ladders, railings and similar work conforming to Fe – 290 Gde E-165 complete all as specified and as directed by Engineer-in-Charge.

100

-

-

... More
M&L for Pre-cast cement concrete block masonry with solid blocks using PCC 1:3:6 type C-1, exc. 10 cm in width and setting in mortar, complete built in CM 1:4 complete all as specified and as directed.

15

-

-

... More
M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.

120

-

-

... More
M&L for rendering 10mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement all as specified and directed.

550

-

-

... More
M&L for Rendering 5mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished even and smooth without using extra cement all as specified and directed.

300

-

-

... More
M&L for roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

100

-

-

... More
M&L for joint free non skid ceramic tiles (coloured ) 7 to 8 mm thick , area of each tile exceeding 0.18 sqm but not exc 0.38 sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & incl 15mm thick screed bed in CM (1:4) complete all as specified and as directed.

10

-

-

... More
M&L for Coloured Non-skid/matte finish Ceramic tiles 7 to 8 mm thick exc. 0.06 sqm but n.exc 0.11sqm area of each tiles in floor/ steps etc set and jointed in neat cement slurry and pointed in coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed.

20

-

-

... More
M&L for glazed ceramic tiles (coloured) 7mm thick , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm on vertical surfaces such as dado , skirting etc, set and jointed in neat cemnt slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering as screed bed in CM (1:3) complete all as specified and directed.

100

-

-

... More
M&L for joint free vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to match the shade of tiles over & incl 15mm thick screed bed in CM (1:4) complete all as specified and as directed.

500

-

-

... More
M&M&L for joint free Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, on vertical surfaces such as dado , skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match to match the shade of tiles over & incl 15mm thick screed bed in CM(1:4) complete all as specified and as directed.

20

-

-

... More
M&L for moulding of kota /marble stone full round complete all as specified.

70

-

-

... More
Dismantling stone slabs and tiles of any description or thickness laid in cement mortar bedded and aprons etc complete all as specified and directed.

6.5

-

-

... More
S&F 20mm thick Granite (of any type) tiles machine cut , in slabs, steps, skirting dado including cutting bullnosing & polishing laid over cement screed bedded and jointed with grey cement slurry and pointed with white or grey cement with admixture pigment to match the shade of slab including making necessary hole for gas pipe complete all as specified and directed.

65

-

-

... More
M&L for 75mm thick cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base in floors and paving ,laid in panels and finished even & fair complete all as specified and directed.

400

-

-

... More
M&L for sand filling under floors, cushning under interlocking tiles or in foundations incl watering and consolidations complete all as specified and directed.

15

-

-

... More
M&L 80mm thick factory made colored mixed with pigment precast concrete interlocking paver block of grade M-40 confirming to IS 15658-2006 manufactured by vibratory process laid over sand cushioning complete all as specified and directed. Note:- Sand cushioning shall be measured and paid seperately under relevant item.

300

-

-

... More
M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed.

80

-

-

... More
M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and directed

0.5

-

-

... More
M&L for insulated Solid PVC Wall Panelling consisting of 5 mm thick PVC sheet of colour as specified inclusive of solvent cement and fixing at site on PVC frame and with necessary fillets into the wall properly complete all as specified & directed.

70

-

-

... More
S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates includirg joining cleat for fixing glass, handles etc. complete all as specified and as directed.

500

-

-

... More
S & F Anodised aluminium window and ventilator shutters, side hung type with or without sash bars, aluminium sections weighing 0.55 kg/m and thickness of section not less than 1.6 mm including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle 150 mm long (1 no.) complete all as specified and directed

80

-

-

... More
S&F Sheet glass, ordinary quality 5.5 mm thick for aluminium doors ,windows and ventilators, glazing in square n exc 0.5 sq.m in each pane complete all as specified and directed.

70

-

-

... More
M&L for factory made, 2nd class hard wood 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

45

-

-

... More
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed in repairs with stainless steel wire staples complete all as specified and directed.

70

-

-

... More
S&F 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

40

-

-

... More
S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

20

-

-

... More
S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

40

-

-

... More
S&F 100mm stainless steel butt hinges, medium weight, cold rolled and fixed complete all as specified and directed.

60

-

-

... More
S&F Stainless steel (Grade 304) Steel gate of any size, revolving gate, wicket gate including bearing , pintle hinges, and bearing rod and all other conntected items railing of design, pattern and other details as directed including all vertical railings, intermediate horizontal railings, necessary brackets, fixing arrangements etc made of hollow tubes, channels, plates etc including necessary welding, grinding, buffing, polishing , making curvature (where directed) fixed as per standard engineering practice and as per manufacturer's recommendation including stainless steel nuts, bolts, fasternr etc of required size complete all as specified and as directed.

100

-

-

... More
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, in opening as per specifiecation and drawings complete all as specified.

60

-

-

... More
S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site alongwith provn of cooler stand complete all as specified and directed.

20

-

-

... More
M&L Cutting holes in exc. half brick but not exc one brick in brick walls built in CM or cement lime mortar & stone walls built in lime mortar for inserting hold fasts & making good dismantled portion in CM (1:3) or PCC (1:2:4) Type B-1 as required complete as specified and directed.

72

-

-

... More
M & L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook & pintle hinges; large hasps & staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way & three way straps,plate washers & similar small articles conforming to Fe290-0 Gde E-165 complete all as specified and directed.

20

-

-

... More
M&L for providing cement concrete with type B-0 1:2:4 (using 12.5 mm graded aggregate) as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

0.5

-

-

... More
M&L for 18/19mm thick block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face one side with decorative choice lamination of 0.9mm thick & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

30

-

-

... More
S&F aluminium anodised barrel tower bolt of extruded section of size 75mm complete all as specified and directed.

8

-

-

... More
S&F Aluminium handles cast type anodised of size 75 mm complete all as specified and directed.

8

-

-

... More
S&F 40mm continuous piano hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

10

-

-

... More
S&F 75mm hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

8

-

-

... More
Supply and laying CPVC pipes of 20 mm dia outer bore SDR 11 & plain CPVC SDR 11 with all special fittings on walls /ceilings or laying in floors complete all as specified and directed.

35

-

-

... More
Supply and laying CPVC pipes of 25mm dia outer bore SDR 11 & plain CPVC SDR 11 with all special fittings on walls /ceilings or laying in floors complete all as specified and directed.

70

-

-

... More
S&F 20 mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA) complete all as specified and directed.

10

-

-

... More
S&F 25 mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA) complete all as specified and directed.

10

-

-

... More
S&F 20 mm outer dia CPVC brass elbow (3/4x1/2) complete all as specified and directed.

15

-

-

... More
S&F 20 mm outer dia CPVC Female Brass Threaded Adaptor (FTA/FBTA) complete all as specified and directed.

12

-

-

... More
S&F 20 mm outer dia CPVC brass "T" (tee) complete all as specified and directed.

12

-

-

... More
S&F 20 mm outer dia CPVC brass elbow complete all as specified and directed.

10

-

-

... More
S&F 75mm bore cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 1:2:4 (using 20 mm graded stone aggregate) complete all as specified and as directed.

14

-

-

... More
S&F 100mm bore cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 1:2:4 (using 20 mm graded stone aggregate) complete all as specified and as directed.

7

-

-

... More
S&F 75mm bore sand cast iron waste pipe any length with or without ears laid in floor complete all as specified and directed.

7

-

-

... More
S&F 75mm bore sand cast iron waste pipe any length with or without ears fixed to walls complete all as specified and directed.

25

-

-

... More
S&F 100mm bore sand cast iron waste pipe any length with or without ears laid in floors complete all as specified and directed.

7

-

-

... More
S&F 100mm bore sand cast iron branch piece single (Equal or unequal) oridinary or inverted with parallel branches complete all as specified and directed.

7

-

-

... More
S&F 75mm bore sand cast iron branch piece single (Equal or unequal) oridinary or inverted with parallel branches complete all as specified and directed.

14

-

-

... More
S&F sand cast iron bend (any radius) 100mm bore dimnishing pieces or tapers (larger bore measured ) fitted with oval acess doors complete as specified and directed.

7

-

-

... More
S&F cast iron cowl 75 mm bore complete all as specified and directed.

3

-

-

... More
S&F 110mm dia bore PVC (SWR) bends (any radius) with access door complete all as specified and directed.

20

-

-

... More
S&F 110mm dia bore PVC (SWR) branch pieces double (Equal or unequal) oridinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

10

-

-

... More
S&F PVC (SWR) pipes 110mm bore, single socketed, in any length with rubber ring jointed fixed to walls complete all as specified and directed.

50

-

-

... More
S&F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to walls for 100mm bore pipe complete all as specified and directed.

30

-

-

... More
S&F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to walls for 75mm bore pipe complete all as specified and directed.

7

-

-

... More
S&F Rotational moulded polyethylene water storage tanks of capacity 500 Litres (cylindrical vertical with closed top) hoisted and fixed in position two layer ,ISI marked all as specified in SSR Part I complete all as specified and directed.

4

-

-

... More
S&F in repairs high pressure of PTMT ball valve of dia 20mm bore with epoxy coated almn rod and high density plastic ball screwed for iron pipe complete as specified and directed.

4

-

-

... More
S&F in repairs sinks of overall size 495mm x 420mm (bowl size 410mm x 330mm x 160mm) made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and directed.

1

-

-

... More
S&F in repairs Vitreous china wash down water closet pan (pedestal pattern), white excluding flushing cistern and flush pipe) incl. P or S trap complete all as specified and directed.

4

-

-

... More
S&F in repairs PVC valveless syphonic action type flushing cistern, 10 ltr capacity low level , white with inlet, ball valve, float and handle including brackets complete all as specified and directed.

7

-

-

... More
S&F in repairs vitreous china urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed. Note :-Supply pipe, flushing cistern, trap and waste pipe shall be measured and paid separately.

6

-

-

... More
S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

6

-

-

... More
S&F Single unit floor mounted water closet with PP soft close seat cover , hinges, incl dual flushing cistern fitting incl. P or S trap of best quality complete all as specified and directed.

1

-

-

... More
S&F in repairs Vitreous China squatting pan “Orissa” pattern, size 580x440mm, white, with integral foot rests (excluding flushing cistern and flush pipe), with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti syphonage pipe etc, supplied and fixed in repairs, provision of lime concrete bedding minimum 150 mm thick ( Lime concrete ratio 1:2:5) complete all as specified and as directed by Engineer-in-Charge. (Note :- (i) WC shall be ISI marked, 1st quality and of makes specified in Appendix ‘D’ (ii) Unit rate quoted shall also be deemed to include for provision of lead joint between CI trap and outlet pipe (iii) Unit rate quoted shall also be deemed to include for labour required for fixing of flushing cistern and flush pipe and also for taking down old flushing cistern and flush pipe. (iv)Supply only of flushing cistern with flush pipe shall be measured and paid for separately. (v) The disturbed surface of floor shall be made good as per existing specification without any extra cost to the Govt. )

3

-

-

... More
S&F in repairs Plastic water closet seat,white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

4

-

-

... More
S&F in repairs vitreous china wash basin, white flat back, size 580x450 excluding traps waste pipe fixed with brackets complete all as specified and directed.

7

-

-

... More
S&F in repairs 32mm/38mm bore waste fittings brass chromium plated for wash hand basin / sink etc with long screwed shand and flynuts etc complete all as specified and directed.

8

-

-

... More
S&F in repairs waste pipe 32mm dia for WHB with coupling fixed complete all as specified and directed.

8

-

-

... More
S&F in repairs brass CP WHB mixer non telephonic for mixing hot and cold water screwed down for iron pipe 15mm bore complete all as specified and directed.

1

-

-

... More
S&F in repairs CP Health Faucet fixed type suitable for EWCs with 1.5 mtr stainless steel tube complete all as specified and directed.

4

-

-

... More
S&F in repairs CP toilet paper holder fancy type complete all as specified and directed.

7

-

-

... More
S&F in repairs glass corner shelf of size 300mmx300mm with 5.5 mm thick glass and stainless steel clip and stainless steel railing allround the shelf complete all as specified and directed.

7

-

-

... More
S&F in repairs 600x450mm bevelled edge mirror of selected quality glass mounted on 5.5mm thick Asbestos Cement building board or commercial ply complete all as specified and directed.

7

-

-

... More
S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide chromium plated bracket guard and 60 cm long railing complete all as specified and directed.

7

-

-

... More
S&F in repairs chromium plated soap dish complete all as specified and directed.

7

-

-

... More
S&F in repairs aluminium snake beading with bush duly fitted with screws of length equal to door width complete all as specified and directed.

20

-

-

... More
S&F in repairs bib taps chromium plated fancy type 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

7

-

-

... More
S&F in repairs tubular towel rail brass chromium plated , 20mm dia D type 600mm long between flanges of cast copper alloy, chromium plated brass screws complete all as specified and directed.

7

-

-

... More
S&F in repairs 15mm dia bore chromium plated stop cock/Angle Valve, with crutch or butterfly handle screwed down for iron pipe or brass ferrule fancy type complete all as specified and directed.

21

-

-

... More
S&F in repairs PVC Connection 15mm with nuts length of 450mm complete all as specified and directed.

21

-

-

... More
S&F in repairs Gun-metal, globe or gate valves of 20mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

8

-

-

... More
S&F in repairs floor door stopper of aluminium alloy body, overall length of cover plate 140 mm and tongue anodised with hard drawn steel sring fixed in floor complete all as specified and directed.

20

-

-

... More
M&L for cutting opening through brick walls for door , window and other opening or enlarging existing opening,converting window into door opening etc. cutting out deffective brick work for under pinning including providing fixing and removing shoring cleaned and stacking bricks removing surplus serviceable brick,hard core etc complete all as specified and directed.

1

-

-

... More
M&L for providing 75 mm thick cement concrete 1:3:6 type C-2 (using 20mm graded crushed stone aggregates) as in plinth protection finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.

60

-

-

... More
M&L for providing cement concrete 1:2:4 mix type B-1 (20mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span,cills,steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

1

-

-

... More
M&L for two coats of synthetic enamel paint on new steel surfaces including preparation of surfaces over a coat of red oxide Zinc chrome primer complete all as specified and directed.

30

-

-

... More
M&L for preparation of new wooden surfaces and applying two coats of synthetical enamel paint over a coat of pink primer complete all as specified and directed.

80

-

-

... More
M&L for preparation of surfaces of old surfaces including removal of old treatment and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

700

-

-

... More
M&L for two coats of plastic emulsion paint of any shade on new or old treated POP surfaces as approved by GE on walls/ceilings including preparation complete all as specified and directed.

700

-

-

... More
M&L for preparation of new surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

650

-

-

... More
M&L for complete removal of existing treatment and Preparation of plastered wall surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and directed.

125

-

-

... More
M&L for preparation of newly plastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over a coat of chalk whiting complete all as specified and directed.

80

-

-

... More
M&L for preparation of old plastered or unplastered surface of wall and applying one coats of distemper oil emulsion, white or tinted over a coat of chalk whiting complete all as specified and directed.

75

-

-

... More
M&L for taking down carefully existing aluminium /copper point wiring, (light, fan socket or power) unscrewing from board/outlet boxes, fitting and fixtures such as switches, sockets, ceiling rose,lamp holder, tube/ceiling fittings, bulk head fittings, tube lights and regulators etc and making good disturbed surfaces on walls, floors , ceilings etc complete all as specified and directed.

255

-

-

... More
M&L for taking down unserviceable submain wiring alongwith batten/PVC/steel conduits etc and making good disturbed surfaces of walls/ floors to match the existing surfaces complete all as specified and directed.

645

-

-

... More
M&L for taking down unserviceable main switches, DBs, and making good disturbed surfaces of walls/ floors to match the existing surfaces complete all as specified and directed.

7

-

-

... More
M&L for point wiring with two runs of PVC insulated unsheathed multistranded copper conductor cable of 1.5 Sqmm(FRLSH), PVC conduit medium grade/ PVC casing caping and GI metal flush boxes (for mounting switches/sockets/regulators/ceiling roses etc.) and drawing one run of 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor (FRLSH) as earth continuity wire in green colour connected to common earth and each terminal box/fitting complete all as specified and directed. (In ceiling portion surface conduit wiring shall be carried out) Note :- The unit rate quoted shall deemed to include the cost of following :- (a) GI metal flush box of minimum thickness of 1.6mm and modular cover plate with frame of any module complete. (b) Proper colour coding is to be followed as per IS specification. (c) Wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement. (d) Electric wiring test completion of wiring ot be submitted before claiming the payment. (e) Cutting chases in wall/floor beam/ceiling to be concealed conduit and making good the disturbed surfaces. Contd......./-

-

-

-

... More
Contd..../- (f) Contractor shall submit proposed internal wiring drawings with fittings, fixtures and sockets etc complete for approval of GE before commencement of work

-

-

-

... More
One light point controlled by one way switch.

102

-

-

... More
One light point controlled by two way switch.

2

-

-

... More
One ceiling fan/exhaust fan point controlled by one switch

31

-

-

... More
One 3 pin socket outlet 5 Amps flush type on the same board with other switches

30

-

-

... More
One switch socket 3 pin 5 Amps flush type on independent board.

47

-

-

... More
One bell/buzzer point controlled by one push button on independent board

6

-

-

... More
All as per Item No 135 here-in-before but with 4 Sqmm FRLSH cable for one socket 5 pin 15 Amps flush type/ plug and socket switch on independent board complete all as specified and directed.

37

-

-

... More
M&L for submain wiring with two single core PVC insulated unsheathed multi-stranded copper conducter of Size 4.0 Sqmm (FRLSH) and one single core PVC unsheathed multistranded copper conductore cable green colour of size 4.0 Sqmm(FRLSH) as earth lead in and including concealed with concealed with PVC conduit medium grade of size not less than 20mm or surface wiring with PVC casing caping of suitable size and making good disturbed wall surfaces to match with existing specification including taking down unserviceable submain wiring complete all as specified and directed. Note : - (a) Three runs of single core cable with one run of PVC conduit/PVC casing and caping will be measured as one length. (b) Wiring shall be concealed/on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement. (c) Rates are deemed to be included for chases of conduit, cutting and making holes in wall/floor for passing in or through conduit making good disturbed surfaces with existing wall colour complete. (d) Electric wiring test after completion of wiring ot be submitted before claiming the payment.

30

-

-

... More
M&L for submain wiring with two single core PVC insulated unsheathed multi-stranded copper conducter of Size 6.0 Sqmm (FRLSH) and one single core PVC unsheathed multistranded copper conductore cable green colour of size 6.0 Sqmm(FRLSH) as earth lead in and including concealed with concealed with PVC conduit medium grade of size not less than 25mm or surface wiring with PVC casing caping of suitable size and making good disturbed wall surfaces to match with existing specification including taking down unserviceable submain wiring complete all as specified and directed. Note : - (a) Three runs of single core cable with one run of PVC conduit/PVC casing and caping will be measured as one length. (b) Wiring shall be concealed/on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement. (c) Rates are deemed to be included for chases of conduit, cutting and making holes in wall/floor for passing in or through conduit making good disturbed surfaces with existing wall colour complete. (d) Electric wiring test after completion of wiring ot be submitted before claiming the payment.

90

-

-

... More
M&L for submain wiring with two single core PVC insulated unsheathed multi-stranded copper conducter of Size 1.5 Sqmm (FRLSH) and one single core PVC unsheathed multistranded copper conductore cable green colour of size 1.5 Sqmm(FRLSH) as earth lead in and including concealed with concealed with PVC conduit medium grade of size not less than 20mm or surface wiring with PVC casing caping of suitable size and making good disturbed wall surfaces to match with existing specification including taking down unserviceable submain wiring complete all as specified and directed. Note : - (a) Three runs of single core cable with one run of PVC conduit/PVC casing and caping will be measured as one length. (b) Wiring shall be concealed/on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement. (c) Rates are deemed to be included for chases of conduit, cutting and making holes in wall/floor for passing in or through conduit making good disturbed surfaces with existing wall colour complete. (d) Electric wiring test after completion of wiring ot be submitted before claiming the payment.

95

-

-

... More
S&F modular switch one way, 6 Amps, 1 Module, 240 Volts complete all as specified and directed

210

-

-

... More
S&F modular switch two way, 6 Amps, 1 Module, 240 Volts complete all as specified and directed

4

-

-

... More
S&F modular switch one way, 16 Amps, 1 Module, 240 Volts complete all as specified and directed

37

-

-

... More
S&F modular bell push 6 A, 1 Module, 240 Volts complete all as specified and directed

6

-

-

... More
S&F modular socket 2/3 pin, 6 Amps, 2 Module complete all as specified and directed

77

-

-

... More
S&F modular socket 2/3 pin, 6/16 Amps, 2 Module complete all as specified and directed

37

-

-

... More
S&F ceiling rose, 3 terminal polycarbonate isolated body complete all as specified and directed

147

-

-

... More
S&F bell ding dong type 240 Volts complete all as specified and directed

6

-

-

... More
S&F LED light fittings 20W, 2000lm, CDL , surge protection of 2Kv, 4 feet 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed

67

-

-

... More
S&F LED light fittings 10W, 1000lm, CDL , surge protection of 2Kv, 2 feet 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

5

-

-

... More
S&F in repairs LED luminaire 600mmx600mm, 36Watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor case of suitable size complete all as specified and directed.

20

-

-

... More
S&F in repairs LED 20W inverter batten type fitting 3/4 feet long aluminum extruded housing, charging time 10-12 hrs with 04 hrs backup with minimum battery capacity 2600 mAH, IP-20 rated voltage 230V, 50 Hz, system wattage 20W +/- 10% system current less than 102mA power factor more than 0.95, system lumen efficiency 100lm/watt, CCT 6500K, CRI more than 80, THD less than 20%, driver efficiency more than 85% complete all accessories prewired and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

12

-

-

... More
Notes for Item No 148 to 151 :- (i) Driver efficiency shall be more than 85% (Constant Current driver). (ii) Shall have Non-isolated type driver. (iii) THD shall beless than 20%. (iv) LED driver current shall be less than 60mA. (v) Efficiency of LED chip shall be more than 130lm/watt. (vi) Efficiency of LED fixture shall be 100lm/watt. (vii) Surge Protection shall be 2.0 Kv & above as per IEC Standard. (viii) Working humidity shall be 95%RH. (ix) Life of the light fittings shall be 50000 Hrs at 70% lumes. (x) CRI shall be more than 80. (xi) Working temperature shall be -10°C to 50°C. (xii) Heat sink extruded aluminium (xiii) Junction temperature shall be 85°C. Contd.../-

-

-

-

... More
Notes (Contd....):- (xiv) Body of fittings shall be extruded aluminium type. (xv) Impact code shall be min IK 03 or more. (xvi) Shall submit LM79 report from third party NABL Accredited laboratory( instead of Manufacturer's in-house Laboratory) (xvii) Shall submit LM80 report from LED manufacturer. (xviii) Low/high voltage, reverse polarity, overload and short circuit protection in-built fixture. (xix) Shall be of IP-20 rating. (xx) Test certificates shall be submitted before commencement of work/claiming for payment. (xxi) Shall submit warranty certificate for minimum 2 years from OEM.

-

-

-

... More
Supply and fixing LED bldg security light fitting 25 watt not less than 2500lm, 230V AC, Cool white, outdoor type, pressure die cast housing with epoxy powder coated, dark graphite grey colour finish, poly carbonate cover with individual LED lenses with IP 65 protection including SPD 10KV complete all specified and as directed.

6

-

-

... More
M&L for Fabricated mounting bracket for security light fitting made out of GI tubing 25mm dia light grade size 1.2m long, bend to shape including MS clamp/bracket made out of 25x3mm GI flat iron with necessary nut & bolts, washers complete all as specified and as directed.

6

-

-

... More
Supply & fixing ceiling fan 1200mm sweep with blades, suitable BLDC remote as per OEM design down rods and connected accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM, 5 star rated, equipped with brushless direct current motor(BLDC) of wattage 28W including provision of cable from ceiling rose/connector to fan including taking down old ceiling fan and deposited to MES store yard complete all as specified and as directed.

24

-

-

... More
Supply & fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 HZ, RPM 1200, Copper winding of sweep 200mm and exhaust fan shall be fixed with suitable size of buzzer bolt/hold fastner including making hole to the wall surface of any type/girth and at any height for fixing of exhaust fan including making good disturbed surface with existing wall colour and provision of cable from ceiling rose/connector to fan including taking down old ceiling fan and deposited to MES store yard complete all as specified and as directed.

4

-

-

... More
Supply & fixing exhaust fan made of steel body complete with louvers, voltage 230V, 50 Hz, RPM 900, 300mm sweep and exhaust fan shall be fixed with suitable size of buzzer bolt/hold fastner including making hole to the wall surface of any type/girth and at any height for fixing of exhaust fan ncluding taking down old ceiling fan and deposited to MES store yard complete all as specified and as directed.

3

-

-

... More
Supply & fixing wall mounted fan 400mm sweep with blades, mounting accessories kit, blade guard set, guard ring, AC 230V with 90 degree oscillation and having speed and oscillation control by two pull cords system complete all as specified and as directed.

6

-

-

... More
Supply and fixing as in repair of MCCB DB VTPN 4 way IP-54, IK-09 made of sheet steel phos phatised, powder painted with 200 Amps copper bus bar for each phase, neutral link, earth bar and Din rail ,415 Volts with double door with Suitable for MCCB 4-Pole 100-160 Amps as incomer and MCB Single Pole outgoing complete all as specified and as directed.

1

-

-

... More
S&F MCB DB SPN 8 way, IP-54, IK-09, double door sheet metal enclosure, 240V, 200 Amps rated copper busbar including suitable size of copper ferrules for fixing of cable complete all as specified and directed

3

-

-

... More
S&F MCB DB SPN 12 way, IP-54, IK-09, double door sheet metal enclosure, 240V, 100Amps rated busbar including suitable size of copper ferrules for fixing of cable complete all as specified and directed

3

-

-

... More
Notes for Item Nos 158 to 160 (i) MCCBs and MCBs will measured and paid separately. (ii) The cost for flushing of Distribution box in any type of wall and making good disturbed surfaces with existing colour shall be deemed to be included in the quoted rate.

-

-

-

... More
S&F single pole and neutral enclosures with two pin and earth plug and socket with one single pole MCB 20 Amps 'C' curve, 10 kA complete all as specified and directed.

3

-

-

... More
S&F MCCB 4 pole, thermal adjustable type, 100 Amps, 50 Hz, 415V with rupturing capacity 25 kA, lcs=100% lcu complete all as specified and as directed.

1

-

-

... More
S&F MCB SPN 6-32 Amps, 10 kA, 'C' curve, 230 Volts, 50Hz complete all as specified and as directed.

6

-

-

... More
S&F MCB SP 6-32 Amps, 10 kA, 'C' curve, 230 Volts, 50Hz complete all as specified and as directed.

66

-

-

... More
M&L for earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised earth strip 25x4mm connected by means of bolts, nuts, check nuts and washer of galvanised iron or steel, provision of 32 mm dia GI pipe medium grade for protection of GI earth wire and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber, MS funnel, wire gauge, 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I. Note: (i) Cost of GI earth strip and GI protection pipe upto 7.5mtr length shall be deemed to be included in the rate quoted for this item (ii) The unit rate shall also includes for Wire mesh, funnel, excavation, PCC chamber pit, test point complete

2

-

-



Potential Partner

Select Your Requirements

Past Bidders
This list is curated from the bidders of the similar tenders in the past

Unlock the Tender details for free
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.