Military Engineer Services Tender
To inquire about any e-tender the Andaman & Nicobar Islands government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder one can find every eprocurement Punjab tender on BidAssist. BidAassist has collated each and every Eproc Andaman & Nicobar Island Tender on its website. Looking for Andaman & Nicobar Island tenders online or going through the cumbersome government websites for it, has been made easier with the help of BidAssist.
Military Engineer Services - MES Tender
Civil And Construction
Eprocure
Opening Date27 Sep 2024
Closing Date8 Nov 2024
Tender Amount₹ 5,59,00,000
Costs
EMD
₹ 6,04,500Document Cost
₹ 3,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_677026_1Bid Award Id
ViewTender No
81116 Addn/Altn to 50 DUsTender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
S&F for Hard drawn steel wire fabric weight not exceeding 4 kg per square metre, cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia welding to existing reinforcement complete all as specified and as directed.
6400
-
-
M/L for applying one coat of epoxy bonding coat as per manufacture's instruction to bind old concrete surfaces of soffit of slab, column, beam and similar structural members for new gunited / cement surface.
1600
-
-
M & L for pressure guniting 40 mm average thickness at a pressure not less than 6kg/ sqcm to all affected RCC structures in cement mortar 1:3 duly modifying with mixture of requisite chemicals (rate included) and including necessary safety precautions and scaffolding upto the height of 15 meters, Tools and plants complete all as per manufacturer's instructions and as directed.
1600
-
-
M & L for non-shrink, cementitious Micro concrete mixed with 12.5mm graded crushed stone aggregate in the ratio as per manufacturer's instruction, as insides and soffits of beams, jacketing of columns, roof slab and similar structural members including necessary form work leak proof for fair finished surfaces. The formwork shall be water tight to facilitate pouring of micro concrete complete all as specified and directed by Engineer-in-Charge.
20
-
-
M&L for applying polymer modified cement mortar rendering 15mm average thick in CM 1:3 on gunited /wall surface duly mixing polymer modifier complete finished even and smooth without using extra cement as per manufacturer's instructions complete all as specified and directed by Engineer-in-Charge.
1600
-
-
M & L for applying curing compound of approved make as specified on newly polymer modifier cement mortar, Micro concreted, gunited surface for complete curing as per manufacturer's instruction complete all as specified and directed by Engineer-in-Charge.
1600
-
-
M&L for cutting out existing cracks in concrete surfaces / masonry wall / RCC slab, forming a 'V' Groove of 25mmx40mm size, cleaning the groove thoroughly with air blower, priming the groove with mixture of Polymer based Resin & Hardener using spray gun/brush, filling the groove with putty of polymer based Resin, Hardener & admixture mixed in ratio as per manufacturer’s instructions, and finally applying a seal coat complete all as specified and directed by Engineer-in-Charge
200
-
-
M&L for drilling 15mm dia holes in to RCC slab / wall / Column /beams to a depth of 100 to 150mm & provide shear connector of 12mm dia rod of length of 150mm bent to "L" shape with 75mm to be embedded in hole & 75mm to be used as dowel, fixed with polyster resin grout mixed mechanically and pour the same into the hole and insert the shear connector and finish the top; allow the same to set complete all as per manufacturer's instructions and as directed.
100
-
-
Drilling of holes required size upto 16 mm diameter and upto100 mm depth in concrete surface/ crack surfaces using rotary cum hammer drill , cleaned and fixing PVC/ brass nozzles with epoxy based sealent to facilates grouting complete all as specified and directed.
150
-
-
M&L for high strength epoxy based for grouting over the concrete surface by injecting through the nozzles to strengthen the weak concrete. The system should have suitable viscosity which will enable it to soak into weak concrete and on subsequent polymerisation to bind the loose and weak concrete. The minimum requirements of epoxy based grout material are as under:
1.Compressive strength @ 7 days : 60 N/sqmm. 2 Tensile strength @ 7 days: 20 N/sqmm. 3. Pot life : 30 to 45 min
660
-
-
M/L for polymer applying rust-remover (pH value –12 ) and then applying polymer based rust preventor (pH Value - 9 ) to all exposed reinforced bars complete all as specified.
300
-
-
Note for Item No 1.01 to 1.14 :-
5% (Five) percentage of the total cost of the Sch-“A” items shall be retained as security deposit against Structural repair/rehabilitation works for a guarantee period of 5 years by submission of FDR in favour of GE from scheduled bank and completion of the entire work shall be issued only after the receipt of satisfactory structural test report from IIT/NIT or any Govt Institutions as approved by GE.
-
-
-
M&L for demolition of RCC Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work [reinforcement cut as required to facilitate demolition] of any description and in any position upto the height of 15 meters not otherwise specifically provided for complete all as specified and as directed.
16
-
-
M&L for RCC M-30 (Design mix)using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed.
Note : TMT(CRS) bars shall be measured and paid separately
8
-
-
M&L for RCC M-30 (Design mix)using 20 mm graded aggregate as in chajjas complete all as specified and as directed.
Note : TMT(CRS) bars shall be measured and paid separately
8
-
-
M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) Finished fair all as specified and directed.
100
-
-
M&L for Formwork to sides of chajjas, canopy, overhang, chullah hoods any projected parts of building and similar items including edges etc all as specified and directed by Engineer-in-charge.
100
-
-
M&L TMT(CRS) bars 10mm dia and over cut to length bent to shape reqd including cranking, bending spirally for hooking for columns, hooking ends and and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified .
1256
-
-
Taking down scrubs/vegitation growth from crevices completely upto any height of area exc 1 Sqm and n. exc 10 Sqm and applying suitable chemical (herbicide) making good with PCC 1:2:4 or necessary plaster with CM 1:4 wiith WPC complete with all safety equipments all as specified and directed
100
-
-
Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key all as specified and as directed.
2500
-
-
M&L for rendering 10mm thick plaster in CM (1:6) on brick/block or concrete surfaces finished even & smooth complete all as specified and as directed.
1000
-
-
M&L for rendering 5mm thick ceiling plaster in CM (1:3) on concrete surfaces finished even & smooth (without using extra cement) complete all as specified and as directed.
500
-
-
M&L for 15mm thick rendering with one layer of 5mm thick plaster in CM (1:4) over a backing coat of 10 mm thick in CM 1:6 on concrete or block masonry surfaces including mixing water proofing compound on top layer as per manufacturer's instructions(or 3% by weight of cement) and finishing the top surfaces even and fair complete all as specified and as directed.
Note :Water proofing compound shall be measured and paid seperately under relevant item of this schedule as supply only ".
1000
-
-
Supply only water proofing compound ISI marked complete all as specified and as directed.
Note : WPC may apply as per manufacturer's instruction or 3% by the wt of cement.
175
-
-
M&L for applying two coats of oil bound distemper over a coat of primer on newly plastered surface of wall including preparation of surface, complete all as specified and as directed.
1000
-
-
M&L for applying two coats of oil bound distemper over a coat of primer on newly plastered surface of ceiling including preparation of surface, complete all as specified and as directed.
500
-
-
M&L for newly plastered surfaces, providing necessary scaffolding & safety precautions and cleaning the surfaces free from any loose paint, dust, greases, growth of fungus, algae or moss using wire brush and levelling the surface even smooth using mechanical sander and finally applying water by pressure jet washer of max pressure of 170 bar with automatic pressure relief system. The following process shall be initiated only after the above surface preparations :-
(a) Filling the surface cracks using crack seal compound on required consistency using electric mixer. (b) Filling the dents and holes using wall care putty in appropriate ratio using electric mixer. (c) Applying one or two coats of damp proof primer (primer coat) using Airless spray technology with max working pressure of 22.8 Mpa/3300 psi and capable of operating single spray gun with a max material hose length of 30m.
(d) Applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm Anti algal weather coat 100% acrylic smooth emulsion paint using Airless spray technology with max working pressure of 22.8 Mpa/3300 psi and capable of operating single spray gun with a max material hose length of 30m.
1000
-
-
Note: (1) Work shall be executed only through authorised applicator duly approved by Manufacturer of Paint and certificate in this connection shall be submitted by the Contractor
(ii) The affected area of the wall due to dampness shall be ascertained by moisture meter of power input 9v Display 60 LEDs using colour code scale and Moisture measurement of each location shall be submitted along with RAR.
(iii) The contractor shall submit MOU letter with any one of Paint manufacturer within 28 days of receipt of acceptance copy failing which contract shall be liable for cancellation. Authorised applicator shall have valid authorisation letter from the manufacturer The authorisation letter needs to be valid for the complete period of execution of the painting work. Contd.../-
-
-
-
(iv) After preparation of the surface, Engr-in-Charge shall inspect and approve the same before applying primer and finishing coats. (v) Building wise stage passing register shall be maintained & submitted alongwith RAR/FB duly signed by Engr-in-Charge and contractor.
(vi) The equipment to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. The specification and details of the equipment and tools pertaining to this item is denoted on Particular Specification.Manual method of paint application is not allowed and also Penalty shall be levied if appropriate tools & equipment pertaining to smart periodicals not used. Contd.../-
-
-
-
(viii) Proper masking arrangement shall be carried before the application of primer or paint.
(ix) The other coat of Primer and Paint shall be applied only after the completion of drying time and comply with recoating period as per manufacturer instructions.
(x) Cost of scaffolding upto 15 metre height shall be included in the quoted rate.
-
-
-
M&L preparation of new wood/wood based surfaces of exc. 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-charge.
720
-
-
M & L Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as secified.
2305
-
-
M&L for completely removal of existing treatment on old surfaces of wall and preparation of old surfaces of wall and applying two coat of oil emulsion distemper over a coat of primer complete all as specified and directed.
6779
-
-
M&L for complete removal of existing treatment and preparation of old surfaces of ceiling and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed by Engineer-in-charge
1731
-
-
M&L for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including preparation complete all as specified and directed.
Note:- Rate quoted shall deemed to include the cost of scaffolding upto 15 metre.)
3821
-
-
M&L for preparation of old painted wooden surface and applying Two coat of synthetic enamel paint of any description exc 10 cm width or girth complete all as specified and as directed by Engineer in charge.
2030
-
-
M&L for preparation of old painted steel surfaces over 10cm in width or girth and applying Two coats of syanthetic enamel paint complete all as specified and as directed by Engineer in charge.
327
-
-
M&L for applying a layer of 1mm thick wall care putty on wall and making surface even and smooth complete all as specified and as directed by Engineer in charge.
6779
-
-
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above ground level) complete all as specified and directed.
24.5
-
-
M&L for 25mm thick plain cement concrete (nominal-mix) type B-1, 1:2:4 (using 20mm graded aggregate ) as in flooring finished even and fair for correction of slope complete all as specified and directed by Engineer-in-charge.
100
-
-
M&L for 40mm thick plain cement concrete (nominal-mix) type B-1, 1:2:4 (using 20 mm graded aggregate) as in floorings , finished even and smooth without using extra cement complete all as specified and directed.
100
-
-
M&L 75mm thick PCC 1:3:6 Type C-2 (using 20mm crushed stone aggregate) as in plinth protection finished even and fair without using extra cement complete all as specified and directed by Engineer-in-charge.
240
-
-
M&L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
10
-
-
M&L for 75mm thick Plain Cement concrete(Nominal Mix) type D2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hardstanding finishing the surface even & smooth without using extra cement including necessary formwork and laid with necessary contraction/dummy joints complete all as specified and directed.
1000
-
-
M&L PCC (Nominal Mix) Type D2 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete including necessary formwork complete all as specified and directed by Engineer-in-charge.
30.65
-
-
M&L PCC (1:2:4) Type B1 (Nominal-Mix) (using 20 mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , on kitchen platform , water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed by Engineer-in-charge.
4
-
-
Demolition of Precast Concrete work built in Cement Mortar including all quoins arches pillars etc complete all as specified and directed.
60
-
-
M&L pre-cast cement concrete block masonry type C1 1:3:6 (using 20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in CM (1:6) complete all as specified and as directed
55
-
-
M&L for precast cement concrete block masonry with solid (half thick) Type C1 (1:3:6) (20mm graded aggregate as per IS- 383) of 10 cm in width and setting in CM (1:6) complete all as specified and as directed.
50
-
-
Dismantling floor, hearth or wall tiles including cement mortar bedding(but not backing) and removing serviceable tiles to stores and rubbish off the premises complete all as specified and directed by Engineer-in-charge.
3020
-
-
M&L for coloured Non-skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.
1680
-
-
All as per Item No 37 above but in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile over 10mm thick backing in cement mortar (1:3) complete all as specified and as directed by Engineer-in-charge.
400
-
-
M&L for coloured non-skid ceramic tiles 7 to 8 mm thick exc. 0.06 sqm but n.exc 0.11sqm area of each tiles in floor/ steps etc set and jointed in neat cement slurry and pointed in coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed by Engineer-in-charge.
140
-
-
M&L for glazed ceramic coloured/printed tiles 450x350x 7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile over 10mm thick backing in cement mortar (1:3) complete all as specified and directed by Engineer-in-charge.
800
-
-
M&L for Machine cut kota stone slab flooring 20-25mm thick on flooring, steps tread etc over and including 15 mm thick screed bed in CM(1:6) etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.
260
-
-
M&L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar etc over and including 10mm thick backing in cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.
140
-
-
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
400
-
-
M&L for coloured chequered cement concrete tiles 30 cm x 30cm x 25 mm thick in floors,steps etc set and jointed neat cement slurry and pointed with mixture of white & grey cement in equal proments & no pigment, over and including 20 mm thick screed bed in CM(1:6) etc complete all as specified and directed.
800
-
-
All as per Item No 44 above but in vertical surfaces as in skirtings, dados and risers of steps and including 15 mm thick backing coat plaster in CM(1:4) etc complete all as specified and directed.
200
-
-
Dismantling of stone slabs and tiles of any description or thickness in floors, approns and laid bedded and pointed in any mortar etc complete all as specified and directed.
35
-
-
M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, Rounding to edges of stone slabs complete over Screed bed or bedding layer of Cement mortar (1:4) 20 mm thick for laying complete all as specified and directed by the Engineer-in-charge.
350
-
-
Taking down chowkats or frames(without taking off shutters from the frame) area exc 1.5 Sqm but n.exc 4.0 Sqm each (including Aluminium windows/ventilators etc) complete all as specified and directed.
300
-
-
Taking down chowkats or frames(without taking off shutters from the frame) area n.exc 1.5 Sqm each.(including Aluminium windows /ventilators etc) complete all as specified and directed
140
-
-
S&F MS Framed work as in doors or gates of angle or other section etc., complete, drilled and fixed for hanging door shutters with and including either hooks and hinges fastening and fixing complete all as specified and directed by Engineer-in-charge.
1320
-
-
S&F Powder coated Aluminium (minimum thickness of powder coating of 50 micron) for shutters of doors, windows and ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (fittings shall be paid separately) with extruded built up standard tubular sections/ appropriate Z section and other sections of approved make conforming to IS : 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc, Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically, wherever required including cleat anlge, Aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws complete all as specified and as directed.
3045
-
-
S&F 25 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides face covered with veneer with lipping/frame to match complete all as specified and directed.
180
-
-
M&L for 18-20mm thick pre-laminated MDF panels of interior grade type II approval shade for kitchen cabin/wardrobe/ wall panelling fixing with necessary fittings like keku fitting, spring clip, hanger plate, modular hinger/ clip fix, handle , knob , locking arrangements or stud fittings as per manufacture’s instruction complete all as specified and directed.
100
-
-
M&L for 12mm thick pre-laminated particle board, exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws or any necessary arrangements complete all as specified and directed.
326
-
-
M&L for 2nd class hard wood Plain fillets exc 13 sqcm and nexc 25 sqcm square,rectangular or triangular in section, clean sawn, secured with nails or bands complete all as specified and directed.
200
-
-
S&F 2nd class hardwood in Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints, supplied and fixed complete all as specified and directed
1.5
-
-
S&F 100 mm brass handles, cast type, polished bright complete all as specified and directed.
400
-
-
S&F 100 mm size hasp and staple, safety type, brass with mild steel hinges pin including bolt to hinge plate with screws complete all as specified and directed.
200
-
-
S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanished and width of flaps 30 mm (when opened) complete all as specified and directed.
160
-
-
S&F teak wood lipping frame 6mm thick for 18/19mm width fixed with nails/ screws complete all as specified and as directed by Engineer in charge
160
-
-
S&F solid PVC door frame of size 50mmx47mm made out of 5mm wood grain printed PVC sheet edges will be painted to match with printed sheet reinforced with MS square tube in opening complete all as specified and directed.
118.8
-
-
S&F factory made solid panel PVC Door shutter30mm thick (Style) consisting of frame made out MS frame shall be covered with heat moulded wood grain printed PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90°C) used instead of exposed portion of PVC sheet beading having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail, & bottom rail; Panneling of colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement at site complete all as specified and directed.
37.5
-
-
M&L for PCC (1:3:6) type C-0 (using 12.5 mm graded stone agg) filled inside the pressed steel chowkhats complete all as specified and as directed.
9
-
-
S&F stainless steel butt hinges, 100mm medium weightcomplete all as specified and directed by Engineer-in-charge.
1122
-
-
S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed. complete all as specified and directed by Engineer-in-charge.
748
-
-
S&F 100mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.
200
-
-
S&F 300mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.
374
-
-
S&F 150mm aluminium handles, cast type, anodised complete all as specified and directed.
772
-
-
S&F 100mm aluminium handles, cast type , anodised complete all as specified and directed.
100
-
-
S&F door eye (magnet eye) with 180° crystel clear lens for safe secure home fitted in pannel door /solid core with appropriate hole complete all as specified and directed.
50
-
-
S&F of 150mm floor door stopper of aluminium alloy and tounge, anodised, with hard drawn steel sring, fixed in door complete all as specified and directed.
250
-
-
S&F Door helical spring mild steel 300mm, ordinary rat tail rod pattern including roller and roller plate complete including necessary arrangements/welding to steel frame etc all as specified and directed.
100
-
-
S&F 25mm dia aluminium anodised best quality curtain rod alongwith brackets in pairs fixed both ends 3 to 4 inch projected outside from wall, same quality complete all as specified and directed.
660
-
-
S&F in repair decorative globes of selected quality for curtain rails to be fixed at both end of curtain rails complete all as specified and directed by Engineer-in-charge.
1100
-
-
S&F powder coated Aluminium (minimum thickness of powder coating 50 microns) anodised Aluminium frame for door,windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
4432
-
-
S & F powder coated Aluminium (minimum thickness of powder coating 50 microns) Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m and thickness of section not less than 1.6 mm including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed by Engineer-in-charge.
700
-
-
Supply only ordinary quality sheet glass 4.00mm thick in square n.exc.0.50 sqm in each pane complete all as specified and directed.
200
-
-
Supply only figured glass 4.00mm thick, pin head type and glazing with oil putty in squares n.exc 0.5 sq.m in each pane complete all as specified and as directed
25
-
-
Supply only aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed
216
-
-
S&F p owder coated Aluminium (minimum thickness of powder coating 50 microns)Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodised coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed.
705
-
-
Refixing Aluminium windows size exc.1.5 sqm and n.exc 4.0 sqm any description in same/other opening after proper cleaning of tracks serviceable the same by means of adjustment, replacement of peg stay (if required), greasing as necessary etc complete including taking down complete all as specified and as directed
25
-
-
Refixing Aluminium windows size n.exc.1.5 sqm any description in same/other opening after proper cleaning of tracks serviceable the same by means of adjustment, replacement of peg stay (if required), greasing as necessary etc complete including taking down complete all as specified and directed.
175
-
-
Taking down 15/20mm Steel / CPVC tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.
1000
-
-
Taking down 25mm Steel / CPVC tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.
400
-
-
Supply and laying of CPVC pipes 20 mm dia outer bore SDR 11 fittings on walls/ceilings or laying in floors complete all as specified and directed.
1000
-
-
Supply and laying of CPVC pipes 25mm dia outer bore SDR 11 fittings on walls /ceilings or laying in floors complete all as specified and directed.
400
-
-
S&F 20 mm CPVC Brass Elbow complete all as specified and directed.
400
-
-
S&F 20 mm CPVC Brass Elbow reducer(3/4 x1/2) complete all as specified and directed.
50
-
-
S&F CPVC Male Brass Threaded Adaptor (MTA/MBTA) 20mm bore complete all as specified and directed.
250
-
-
S&F CPVC Male Brass Threaded Adaptor (MTA/MBTA) 25mm bore complete all as specified and directed.
50
-
-
S&F CPVC Female Brass Threaded Adaptor (FTA/FBTA) 20mm bore complete all as specified and directed.
50
-
-
S&F CPVC Female Brass Threaded Adaptor (FTA/FBTA) 25mm bore complete all as specified and directed.
50
-
-
Supply and fixing 20 mm outer dia CPVC Brass Tee complete all as specified and directed.
300
-
-
Supply and fixing 25 mm outer dia CPVC tank Adaptor complete all as specified and directed.
50
-
-
Supply and fixing 20mm outer dia CPVC brass union complete all as specified and directed.
100
-
-
Supply and fixing 25mm outer dia CPVC brass union complete all as specified and directed.
50
-
-
M&L for Cutting chases in concrete block walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.
1000
-
-
S&F in repairs 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in treanches incuding necessary clamps etc to fixing complete all as specified and directed.
178
-
-
S&F in repairs 110 mm bore PVC (SWR) bends of any radius with access door complete all as specified and directed.
50
-
-
S&F in repairs 110 mm bore PVC (SWR) branch piece, single (single 'Y') equal or unequal with access door complete all as specified and directed.
50
-
-
S&F in repairs 110mm bore PVC (SWR) branch piece, double (double 'Y') equal or unequal with access door complete all as specified and directed.
50
-
-
S&F in repairs 110mm bore PVC (SWR) junction single, (single 'T') equal or unequal with access door complete all as specified and directed.
50
-
-
S&F in repairs 110mm bore PVC (SWR) junction double, (double 'T') equal or unequal with access door complete all as specified and directed.
50
-
-
S&F in repairs 110 mm bore PVC (SWR) couplers complete all as specified and directed.
50
-
-
S&F in repairs 110 mm bore PVC (SWR) vent cowl fixed on top complete all as specified and directed.
16
-
-
S&F in repairs 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in treanches incuding necessary clamps etc to fixing on walls as required complete all as specified and directed.
200
-
-
S&F in repairs 75 mm bore PVC (SWR) bends of any radius with access door complete all as specified and directed.
50
-
-
S&F in repairs 75 mm bore PVC (SWR) branch piece,single (single Y) equal or unequal with access door complete all as specified and directed.
50
-
-
S&F in repairs 75 mm bore PVC (SWR) branch piece,double (double Y) equal or unequal with access door complete all as specified and directed.
50
-
-
S&F in repair 75 mm bore PVC (SWR) junction single, (single T) equal or unequal with access door complete all as specified and directed.
50
-
-
S&F in repair 75 mm bore PVC (SWR) junction double, (double T) equal or unequal with access door complete all as specified and directed.
50
-
-
S&F in repair 75 mm bore PVC (SWR) couplers complete all as specified and directed.
50
-
-
S&F in repair 75 mm bore PVC (SWR) vent cowl fixed on top complete all as specified and directed.
50
-
-
S&F in repairs PVC (SWR) floor traps 100mm bore with stainless steel grating (measured seperately) including jointing to waste pipe and in cement concrete 1:2:4 type B-1 complete all as specified and directed.
50
-
-
S&F in repairs Vitreous China wash down water closet pan of size 540x375x415mm 'P' trap or 'S' Trap (pedestal pattern), white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.
49
-
-
S&F in Repairs 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, and connections to pies and fixing of chain and pull, or lever, with PVC connections 20mm size with PTMT nuts of length 600mm complete all as specified and directed.
50
-
-
S&F in repairs PVC water closet seat cover (any description and any colour), closed pattern and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
50
-
-
S&F in repairs waste pipe any dia (32/40mm) alongwith necessary fittings connected to wash hand basin /kitchen sink complete all as specified and directed.
150
-
-
S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
50
-
-
S&F in repairs stainless steel toilet paper holder of size 165mmx140mmx75mm with flat recessed type stainless steel complete all as specified and directed.
50
-
-
S&F in repairs Vitreous China wash basin, white, flat back, size 630x450mm fixed on MS brackets complete all as specified and directed.
50
-
-
Supply only PVC connections 15/20mm size with PTMT nuts of length 600mm complete all as specified and directed.
100
-
-
S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood treated with anti-termite and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.
50
-
-
S&F in repairs CP Towel Ring fixed with and including Chromium plated brass screws and wall plugs (Minimum weight 90gms) complete all as specified and directed.
50
-
-
S&F in repairs 600mm long CP Brass Towel Rail 20mm dia fixed to wall with necessary chromium plated screws and wall plugs complete all as specified and directed.
50
-
-
S&F in repairs bib taps, cast copper alloy heavy duty, 15 mm dia, Chromium Plated, long body Fancy Type screwed down for iron pipe and fixed etccomplete all as specified and directed.
100
-
-
S&F in repairs two way bib tap cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for pipe or union fixed for 15mm bore complete all as specified and directed.
50
-
-
S&F in repais Pillar taps,heavy duty chromium plated, fancy type 15 mm dia cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
50
-
-
S&F in repairs Angular stop cock, chromium plated , fancy type, (concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for pipe or union fixed for 15mm bore complete all as specified and directed.
50
-
-
S&F Brass Chromium plated mixer, fancy type (concealed type) for mixing hot & cold water screwed down for iron pipe/CPVC pipe and fixed complete all as specified and directed.
50
-
-
S&F in repairs Brass Chromium plated overhead shower rose with arm 125 mm size with long body swivel joint including fixing to CPVC/steel pipe or union, complete all as specified and directed.
50
-
-
S&F in repairs 15mm dia Stop cock chromium plated fancy type with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe/CPVC pipe or for unions and fixed complete all as specified and directed.
50
-
-
S&F Mild steel screw bolts (machine made) 5 to 10mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n. exc 10cm long complete all as specified and directed.
800
-
-
S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
50
-
-
S&F in repairs soap dish, brass, chromium plated fixed to wall with brass chromium plated screw complete all as specified and directed.
50
-
-
S&F in repairs 125 mm dia CP grating including joints with solvent cement complete all as specified and directed.
40
-
-
S&F in repairs kitchen sinks with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm (bowl size 410mm x 330mm x 160mm) including waste fittings and couplings complete all as specified and directed.
50
-
-
S&F in repairs CP Waste coupling any 32/40 (any dia) suitable for Kitchen Sink/WHB fixed with waste pipecomplete all as specified and directed
100
-
-
S&F in repairs stainless steel plate rack of size 900x 750x 250mm made of 1.00mm thick stainless steel fixed into wall with necessary brass screws and plugs complete all as specified and directed.
50
-
-
S&F in repairs vitreous China squatting pan, `Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.
1
-
-
M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming to Fe.290.Gde-E-165 complete all as specified and as directed.
10000
-
-
M&L for Mild steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.
2000
-
-
M&L for MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment confirming to Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed.
800
-
-
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Note: Height of the bldg up to G+3 storey including necessary safety arrangements.
1800
-
-
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Note: Height of the bldg up to G+3 storey including necessary safety arrangements.
250
-
-
S & F Aluminium flat iron work in wind ties 40x6mm size fixed with 50mm/ 75 mm aluminium self staging screws with integral EPDM washer screwed in roof covering all as directed. Note: Height of the bldg up to G+3 storey including necessary safety arrangements.
1200
-
-
Dismantling wrought iron or mild steel work of any description and any position as directed complete all as specified and directed.
53.15
-
-
S&F Mild steel rolled sections in Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. complete all as specified and directed.
2200
-
-
M&L for stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete al as specified and directed.
500
-
-
M&L for providing Plain cement concrete (Nominal Mix) type B-1, 1:2:4 (using 20mm graded aggregate) as in coping, benching, and similar works slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.
7
-
-
M&L for precast RCC 1:2:4 type B-1 using 20mm graded stone agg as in cover slab and set in cement mortor 1:6 complete incl necessary form work complete all as specified and directed..
8
-
-
M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.
10
-
-
M&L for 200 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.
200
-
-
M&L Plain cement Concrete bed (Nominal Mix), 1:3:6 type C-2 to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
195
-
-
Excavation in trenches in hard/dense soil n.exc.1.5M wide and n.exc.1.5M deep and getting outdoor complete all as specified and directed.
73
-
-
Removing excavated material n exc. 50m and depositing where directed at a level n exc.1.5M complete all as specified and directed.
65
-
-
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick with soils complete all as specified and directed.
296
-
-
M&L for PCC (1:3:6) (Nominal Mix) Type C2 (using 40 mm graded stone aggregate) in surface channels and PCC drains including necessary formwork complete all as specified and directed.
30
-
-
M&L for special treatment of sunken portion of WC, Bathroom Trap, Kitchen Trap of as per following stages:
Stage 1:- Demolition of cement concrete and preparing the surfaces of existing sunken portion of bath etc with wire brush to remove all loose dirt, oil grease etc.
Stage 2:- Providing 10 mm thick plaster in CM 1:4 with suitable water proofing compound as per manufacturer's instruction.
Stage 3:- Applying seal primer and allow to dry for 8 hours under touch dry condition as per manufacturer's instruction.
Stage 4:- Applying two coats of water proofing decorative elastomeric coating system.The surface after painting one coats shall be allowed to dry of 6 hours before next coats) all as per manufacturer instruction Contd..../-
20
-
-
Stage 5:-Again rendering 10mm thick in CM 1:4 with suitable water proofing compound as per manufacturer's instruction.
Stage 6. All CI joints shall filled with mixture of cement fine sand and plaster seal s per manufacturer's instruction.
Stage 7:- Making holes in wall and fixing 600mm long 20mm dia GI spout for draining the surplus water if any.
-
-
-
M&L for drilling 6mm dia holes at a downward/horizontal angle of 45 degree at 150mm centre to centre at junction of floor and wall or contact and wood work or similar affected area and filling ATT solution @ 0.5 litre/hole and sealing the same with gray or white cement as required.
Note: Anti-termite treatment shall be carried out through authorised agency having valid licence. Contractor shall submit MoU for the same to GE before commencement of the work
500
-
-
Rough excavation not exceeding 1.5 m deep and getting out soft/loose soil complete all as specified and directed by Engineer-in-Charge
120
-
-
Removing excavated material above 50m and n exc. 250m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.
108
-
-
Spreading and levelling in layers n exc. 25 cm thick excavated soil complete all as specified and directed.
108
-
-
M&L for 40mm thick plain cement concrete type B-1 1:2:4 (nominal mix) using 20mm graded stone aggregate for correction of roof slab / roof padding including removal existing treatment, loose concrete etc and making necessary slope etc complete all as specified and directed.
1200
-
-
M&L for 15mm(10+5) thick rendering/screed on terrace or concrete surfaces in cement mortar 1:4 finished even and fair and apply WPC (WPC @3% by wt of cement measured and paid seperately on item ser No 13 and applied on 5 mm thick top layer only) complete all as specified and directed.
1200
-
-
M&L for applying APP modified water proofing treatment over existing RCC roof slab with following specification including brushing off the surface to receive the treatment obtain the required surface complete as directed :- (a) Applying bituminous primer @ 1.2 kg/Sqm on the prepared dry roof surface.
(b) Laying 3mm thick APP membrane Plain finish weight not less than 3 to 4 kg per sqm by torch application with minimum 10cm side lap and 15cm end lap.
(c) Applying bituminous primer @ 1.2 kg/Sqm and applying two coat of bituminous aluminium paint at the rate of 0.3kg/sqm.
Note : (i) Laying of APP membrane shall be got done through an authorized applicator of manufacturer or his authorised agent.
(ii) WPC shall be measured and paid seperately on relevant item of schedule.
1200
-
-
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground Concrete, brick work, masonry, etc complete all as specified and directed.
100
-
-
Dismantling fencing wire mesh of any type complete all as specified and directed.
100
-
-
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil complete all as specified and directed.
190
-
-
S&F MS framed work such as fencing post including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
2615
-
-
M&L for PVC coated GI chain link fencing 3.5mm dia with 50mm x 50mm mesh including fixing of MS line wire / rod, flat iron & machine made hexagonal or square head bolts to fencing posts complete all as specified and directed.
Note :- Supply only of MS rod and bolts will be measured and paid seperately.
1557.5
-
-
Supply only mild steel screw bolts n exc 12 mm dia & 5 to 10cm long machine made with hexagonal or square head at one end and screwed the other or screwed both ends for fixing of chain link fencing complete all as specified and directed.
140
-
-
Supply only 10 mm dia MS bars for support to chain link fencing confirming to Fe-290 (Gde E-165)complete all as specified and directed.
455
-
-
S&F in replacement 25mm bore Gun Metal Globe or gate valves with iron wheel, screwed both ends for iron pipe including taking down old unserviceable gate valves and fixed complete all as specified and directed.
50
-
-
S&F in replacement 50mm bore Gun Metal Globe or gate valves with iron wheel, screwed both ends for iron pipe including taking down old unserviceable gate valves and fixed complete all as specified and directed.
15
-
-
Taking doqwn old unserviceable CI/GI water tubing with all fittings, laid in trenches/ fixed on walls/ on roof etc of the following sizes :-
-
-
-
25 mm bore
900
-
-
50 mm bore
150
-
-
100 mm bore
450
-
-
150 mm bore
150
-
-
S&F medium grade Galvanised water water tubing with all fittings, laid in trenches/ fixed on walls/ on roof etc of the following sizes :-
Note :- All GI tubing fixed on wall/roof shall be fixed with clamp and in slab GI tube passing through PVC pipe of suitable size by fixing with PCC and plastering in cement mortar and make surface as existing condition so that no water leaks through pipe holes.
-
-
-
25 mm bore
900
-
-
50 mm bore
150
-
-
Supply, laying, jointing and testing of Ductile Iron pipes with spigot and socket ends centrifugally class-K-9, as in trenches of following bore in new or old locations :-
Note :- (i) Joints and DI specials shall be measured and paid seperately.
(ii) Excavation and earthwork shall be measured and paid separately under relevant items.
-
-
-
100mm bore
450
-
-
150mm bore
150
-
-
S&F in replacement of DI bends ( any type, radius, angle) tapers any type, (straight, bends, increasing, decreasing or double socket etc) Tee pieces single branch "Y" junction, double branch, cross (all socket or socket and spigot or flanged) collars, caps and plugs upto 150mm bore complete all as specified and directed.
250
-
-
M&L for cutting cast iron pipes and reducing to required length before laying DI pipe of size 100mm bore complete all as specified and directed.
5
-
-
M&L for cutting cast iron pipes and reducing to required length before laying DI pipe of size 150mm bore complete all as specified and directed.
5
-
-
S & F in replacement tyton joint/rubber gasket joint for CI/DI for 100mm suitable for spigot and socket pipes and fittings complete all as specified and directed.
5
-
-
S & F in replacement tyton joint/rubber gasket joint for CI/DI for 150mm suitable for spigot and socket pipes and fittings complete all as specified and directed.
5
-
-
S&F sluice valve 100mm bore class PN 1.6 including flange, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed including taking down old unserviceable sluice valves complete all as specified and directed.
5
-
-
S&F sluice valve 150mm bore class PN 1.6 including flange, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed including taking down old unserviceable sluice valves complete all as specified and directed.
2
-
-
M&L for construction of valve chamber of internal size of 1500x1500x1000mm internal dimension with block masonry in cement mortar 1:6 with PCC (Nominal Mix) 1:3 type C-2 sub base plaster internally and exposed external surface in cement mortar 1:4 5mm thick and provision of valve chamber cover made out of MS sheet 3.15mm thick welded to angle iron frame 40x40x5mm made out of double/single door type with hinges and providing proper locking arrangement duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
5
-
-
Demolition of reinforced cement concrete of any description and in any position (RCC overhead tanks, shelves RCC parapet/railing etc) other than ground floor and removing debris from work site complete all as specified and directed.
12
-
-
M&L for PCC type B-1 1:2:4 (using 20mm graded aggregate) as in roof padding including necessary formwork complete all as specified and directed.
12
-
-
S&F in replacements of rotational moulded polyehtylene ISI marked water storage tanks (cylinderical vertical with closed top) double layer with lid of capacity 1000 litres and providing proper locking arrangement etc hoisted and fixed in positions complete all as specified in SSR Part-I and directed by Engineer-in-charge.
50
-
-
S&F in replacement ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed ( Min wt 20mm-210 gms/ 25mm- 4550gms) of 25mm size complete all as specified and directed.
50
-
-
Excavation in trenches for taking out, laying of pipe in soft/loose soil n.exc.1.5M wide and n.exc.1.5M deep and getting out complete all as specified and directed.
278
-
-
M&L for cutting of existing bituminous road for laying GI/CI/DI pipe lines of all sizes including making good cut surfaces using bituminous mix complete all as specified and directed.
10
-
-
M&L for PCC 1:3:6 type C-2 (using 40mm graded aggregate) as in foundations, filling and mass concrete for pole and stay complete all as specified and directed.
5
-
-
M&L for taking down carefully existing Copper point wiring including PVC Conduits, (light, fan socket or power) unscrewing from board/outlet boxes, fitting and fixtures such as switches, sockets, ceiling rose,lamp holder, tube/ceiling fittings, bulk head fittings, tube lights and regulators etc and making good disturbed surfaces on walls, floors , ceilings etc complete all as specified and directed.
1578
-
-
M&L for taking down unserviceable submain wiring alongwith batten/PVC conduits etc and making good disturbed surfaces of walls/ floors to match the existing surfaces complete all as specified and directed.
1620
-
-
M&L for taking down unserviceable main switches, DBs, and making good disturbed surfaces of walls/ floors to match the existing surfaces complete all as specified and directed.
57
-
-
M&L for taking down fan, sealing cable end, dismantling fan blades and removing fan and blades to be deposited to MES store complete all as specified and directed.
128
-
-
M&L for point wiring with two run of PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm (FRLSH), PVC conduit medium grade/ PVC casing caping and Modular GI metal flush boxes (for mounting switches /sockets/ regulators/ceiling roses etc) and drawing one run of 1.5 sqmm PVC insulated unsheathed multistranded copper conductor cable (FRLSH) as earth continuity wire in green colour connected to common earth and each terminal box/fitting all as specified and as directed by Engr-in-Charge.
(In ceiling Portion surface conduit wiring shall be carried out.) Note: The quoted rate inclusive for the following :- (
(a) GI metal flush box minimum 1.6 mm thickness and Modular cover plate with frame of any module complete.
(b) Proper colour coding is to be followed as per IS Specification. (c) wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement.
(d) Electric Wiring test sheet after completion of wiring to be submitted before claiming payment. Contd..../-
-
-
-
Contd....
(e) Cutting chasis in wall/floor beam to be concealed conduit and making good the disturbed surface is deemed to be included in the quoted rate.
(f) Contractor shall submit proposed internal wiring drawings with fittings, fixtures and sockets etc., complete for approval of GE before commencement of work.
-
-
-
One light point controlled by one way switch.
678
-
-
One ceiling fan point controlled by one way switch and regulator.
128
-
-
One exhasut fan point controlled by one way switch.
100
-
-
One switch socket 5 pin 5 Amps flush type on independent board.
294
-
-
One switch socket 5 pin 5 Amps flush type on same board.
128
-
-
One light point controlled by two way switch.
50
-
-
One bell/buzzer point controlled by one push button on indpendent board
50
-
-
All as per Item No 199 here-in-before but with 2.5 Sqmm FRLSH cable for one socket 5 pin 15/16 Amps flush type Plug and Socket switch on independent board complete all as specified and directed.
150
-
-
S&F modular switch one way, 6 Amps, 1 module, 240 volts complete all as specified and directed.
1328
-
-
S&F modular switch one way, 16 Amps, 1 module, 240 volts complete all as specified and directed.
150
-
-
S&F modular switch two way, 6 Amps, 1 module, 240 volts complete all as specified and directed.
100
-
-
S&F modular bell push one way, 6 Amps, 1 module, 240 volts complete all as specified and directed.
50
-
-
S&F ceiling rose, 3 terminal polycarbonate isolated body complete all as specified and directed.
1106
-
-
S&F bell ding dong type complete all as specified and directed.
50
-
-
S&F modular socket 2/3 pins, 6 Amps, 2 module complete all as specified and directed.
422
-
-
S&F modular socket 2/3 pins, 16 Amps, 2 module complete all as specified and directed.
150
-
-
Supply and fix Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
172
-
-
M & L for submain wiring with two single core PVC insulated unsheathed multistranded copper conductor cable of size 6 sqmm (FRLSH) and one single core PVC insulated unsheathed multistranded copper conductor cable green colour of size 6 Sqmm (FRLSH) as earth lead in and including concealed with PVC conduit medium grade of suitable size not less than 25mm size or surface wiring with PVC casing caping of suitable size and making good the disturbed wall surfaces to match with existing specification including takind down unserviceable submain wiring complete all as specified and as directed.
Note : (i) Three run of cable with one run of PVC conduit/PVC casing and caping will be measured as one length.
(ii) Wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement.
(iii) Rates are deemed to be included for chases of conduit, cutting and making holes in wall/floor for passing in or through conduit and making good disturbed surfaces with existing wall colour complete
(iv) Electric Wiring test sheet before and after completion of wiring to be submitted before claiming payment
(v) Contractor shall submit proposed submain wiring drg complete for approval of GE before commencement of work.
540
-
-
M & L for submain wiring with two single core PVC insulated unsheathed multistranded copper conductor cable of size 4 sqmm (FRLSH) and one single core PVC insulated unsheathed multistranded copper conductor cable green colour of size 4 Sqmm (FRLSH) as earth lead in and including concealed with PVC conduit medium grade of suitable size not less than 20mm size or surface wiring with PVC casing caping of suitable size and making good the disturbed wall surfaces to match with existing specification including takind down unserviceable submain wiring complete all as specified and as directed.
Note : (i) Three run of cable with one run of PVC conduit/PVC casing and caping will be measured as one length.
(ii) Wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement.
(iii) Rates are deemed to be included for chases of conduit, cutting and making holes in wall/floor for passing in or through conduit and making good disturbed surfaces with existing wall colour complete
(iv) Electric Wiring test sheet before and after completion of wiring to be submitted before claiming payment
(v) Contractor shall submit proposed submain wiring drg complete for approval of GE before commencement of work.
430
-
-
M & L for submain wiring with two single core PVC insulated unsheathed multistranded copper conductor cable of size 1.5 sqmm (FRLSH) and one single core PVC insulated unsheathed multistranded copper conductor cable green colour of size 1.5 Sqmm (FRLSH) as earth lead in and including concealed with PVC conduit medium grade of suitable size not less than 20mm size or surface wiring with PVC casing caping of suitable size and making good the disturbed wall surfaces to match with existing specification including takind down unserviceable submain wiring complete all as specified and as directed.
Note : (i) Three run of cable with one run of PVC conduit/PVC casing and caping will be measured as one length.
(ii) Wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement.
(iii) Rates are deemed to be included for chases of conduit, cutting and making holes in wall/floor for passing in or through conduit and making good disturbed surfaces with existing wall colour complete
(iv) Electric Wiring test sheet before and after completion of wiring to be submitted before claiming payment
(v) Contractor shall submit proposed submain wiring drg complete for approval of GE before commencement of work.
350
-
-
Supply & fixing ceiling fan 1200mm sweep suitable BLDC remote with blades and sensor, down rods and connected accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM, 5 star rated, equipped with brushless direct current motor (BLDC) of wattage 28W including provision of cable from ceiling rose/connector to fan complete all as specified and as directed.
128
-
-
Supply & fixing of exhaust fan metal body, AC, single phase 230 Volts, 300 mm sweep complete with shutter and louvers and exhaust fan shall be fixed with suitable size of buzzer bolt/hold fastner including making to the wall surface of any type/girth and at any height for fixing of exhaust fan including making good disturbed surface with existing wall colour and provision of cable from ceiling rose/connector to fan complete all as specified and as directed
100
-
-
S&F as in repair LED lights fitting 20W, 120 lm/watt, IP20, CCT value 6500K, surge protection of 2 KV, 4 feet 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
206
-
-
S&F as in repair LED 20W inverter batten type fitting 4/3 feet long aluminium extruded housing, charging time 10-12 Hrs with 04 Hrs backup,IP-20 ,rated voltage 230 V, 50 Hz, system wattage 20W +/- 10%, system current less than 102 mA, power factor more than 0.95, system lumen efficiency 120lm/watt, Minimum battery capacity of 2600mAH,CCT 6500K, CRI more than 80, THD less than 30%, driver efficiency more than 85% complete all accessories prewired and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed
50
-
-
Supply & fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt, 100lm/watt, IP 20, CDL, 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.
172
-
-
M&L for taking down and refixing of existing LED light fitting 20W/10W of any make/model, 220V and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
58
-
-
Supply and fixing surface LED down lighter 18W, 110 lm/watt, IP-20, complete all as specified and as directed.
50
-
-
Supply and fixing LED single head wall light, metal body, 20 Watt, IP 20, lamp base B22 including lamp 9 watt complete all as specified and as directed.
128
-
-
Note for item No 215 to 220
(i) Driver efficiency more than 85% (Constant current driver)
(ii) Non isolated type driver (iii) THD less than 20% (iv) LED driver current less than 60 mA (v) Efficiency of LED Chip more than 130 lm/watt (vi) Efficiency of LED Fixture 100 lm/watt (vii) Surge protection 2.0 KV & above as per IEC standard (viii) working humidity 95%RH (ix) Life 50000 Hrs at 70% lumes (x) CRI more than 80 (xi) Working temp -10°C to 50°C.
(xii) Heat Sink extruded aluminum.
(xiii) junction temperature 85°C.
(xiv) Body of fitting Extruded Aluminum.
(xv) impact code Min IK 03 or more.
(xvi) LM79 report from thir party (instead of company in house lab) NABL accredited lab.
(xvii) LM 80 report from LED manufacturer (xviii) Low/High voltage, reverse polarity, overload and short circuit protection inbuilt in fixture (xviiii) IP-20.
(xx) Test certificates to be submitted before commencement of work/ claiming for payment.
(xxi) Warranty certificate for minimum 2 years to be submitted from OEM.
-
-
-
Supply & fixing electric water heater, storage type, shock resistant & rust proof engineering thermoplastic body, high grade SS inner tank, wattage 2 KW, capacity 15 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, fastner bolts, 16A plug including stainless steel hose pipe-02 Nos complete all as specified and as directed.
28
-
-
Supply & fixing electric water heater, storage type, shock resistant & rust proof engineering thermoplastic body, high grade SS inner tank, wattage 2 KW, capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, fastner bolts, 16A plug including stainless steel hose pipe complete all as specified and as directed.
22
-
-
Supplying and laying on wall of CPVC pipes outer diameter 20mm SDR 13.5 pipes & plain CPVC SDR 11 fittings complete all as specified and as directed.
150
-
-
Supply and fixing Stop valves 20mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
100
-
-
Supply and fixing Bib tap standard 20 mm PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 20mm-125gms) complete all as specified and as directed.
100
-
-
Supply ,Installation ,Testing & Commissioning as in repair Microprocessor based Single phase tamper proof electronic smart energy meter( pre paid/ postpaid)rating with 2 wire 240 Volts, 50 HZ, of range 5-60 Amps, confirming to IS 16444 with DLMS protocol , LED/LCD display and parameters like Voltage, Current, Frequency, Power, Power factor, KWh/ KVA,Network work topology GPRS/LONG RANGE RF compatible for smart energy billing system both post paid and prepaid all as specified and as directed by Engr- in- Charge Note : (i) Old unserviceable meter will be deposited to MES store yard. (ii) The rate does not include the cost of server charges and cost of integration to server.
50
-
-
Supply and fixing meter box made up of polycarbonate IP-66, single door hinged type, transparent with locking lid arrangement suitable for smart single phase meter complete all as specified and as directed.
50
-
-
Supply and fixing LED building security light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame with lumen output not less than 2500 lumens suitable wattage for efficiency not less than 100 lumens/watt having secondary optics min wattage 25 watt with ingress protection IP 65/66 and potted electronic driver of minimum IP 67 with THD less than 10% CRI80, P.F0.95, CCT 5700K, IK08 SPD of capacity 10 KV and testing on completion complete all as specified and as directed. complete all as specified and as directed.
28
-
-
M&L for GI bracket for street light fitting made out of 25 mm bore pipe ISI marked light grade GI tube bent to shape required not less than 1.20m long fixed with and including MS flat iron clamps made out of 25x3 mm GI flat, bolts, nuts and washer etc., complete all as specified and as directed.
28
-
-
Supply & fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amp, 'C' curve, 10 KA complete all as specified and directed.
72
-
-
M&L for sheet metal board complete factory made indoor type, fabricated out of 2.00 mm thick CRCA sheet, wall mounting, dust and vermine prooft of size 1.0m x 0.75m x 0.20m (or) approx volume of 0.15 Cum flushed in wall including mounting arrangement for MCCB DB TPN 4 way with front opening and locking arrangement ncluding painting with two coats of epoxy powder paint over a coat of primer including PCC work complete all as specified and as directed.
7
-
-
Supply and fixing MCCB DB VTPN 4 way IP-54, IK-09 made of sheet steel phos phatised, powder painted with bus bar 200A, neutral link, earth bar and Din rail 415 Volts with double door, suitable for MCCB 4 Pole 100 Amps as incomer and MCB Single Pole as outgoing complete all as specified and as directed.
7
-
-
Supply & fixing MCB DB's SPN 8 way, IP-54, IK-09 double door, sheet metal enclosure, 240V, 100 amps rated busbar including suitable size of copper ferrules for fixing of cable complete all as specified and as directed.
Note for item srl No 233 & 234
(i) MCCB and MCB will be measured and paid separately.
(ii) The cost for flushing of Distribution box in any type of wall and making good disturbed surfaces with existing colour shall be deemed to be included in the quoted rate
50
-
-
Supply and fixing MCCB 4 pole, thermal adjustable type, 100 Amp, 50 Hz, 415 V with rupturing capacity 25 KA ICS = 100% ICU, complete all as specified and as directed.
7
-
-
S&F as in repair Surge Protection Device, breaking capacity 40KA/Pole, 4 Pole with sheet metal enclosure complete all as specified and as directed.
7
-
-
Supply and fixing MCB SP 6 to 32 Amps ,10 KA, C Curve, 230 Volts ,50 HZ complete all as specified and as directed.
300
-
-
Supply and fixing MCB SPN 40 to 63 Amps ,10 KA, C Curve, 230 Volts ,50 HZ complete all as specified and as directed.
50
-
-
Supply and fixing MCB SP 40 Amps ,10 KA, C Curve, 230 Volts ,50 HZ complete all as specified and as directed.
84
-
-
Supply and fixing PVC insulated sheathed single core Aluminium cable of size 16 Sqmm complete all as specified and as directed.
110
-
-
Supply and fixing non metallic rigid PVC conduit 25mm dia heavy duty with all fittings complete all as specified and directed.
110
-
-
M&L for earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised earth strip 25x4mm connected by means of bolts, nuts, check nuts and washer of galvanised iron or steel, provision of 32 mm dia GI pipe medium grade for protection of GI earth strip and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber, MS funnel, wire gauge, 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I. Note: (i) Cost of GI earth strip and GI protection pipe upto 7.5mtr length shall be deemed to be included in the rate quoted for this item
(ii) The unit rate shall also includes for Wire mesh, funnel, excavation, PCC chamber pit, test point complete
14
-
-
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3½ core including taking down old unserviceable cable complete all as specified and directed.
Note : (i) The rates shall be inclusive of cable lugs at both ends of cable.
(ii) Joint kit if required shall be measured and paid seperately under relevant item.
(iii) Necessary excavation and earthwork shall be measured and paid separately.
360
-
-
Supply & laying Double wall corrugated HDPE pipe ISI marked of size outer dia 50mm, inner dia 38mm including specials such as couplers, bends with smooth internal and corrugated external surface for non presuure under ground cable etc., complete all as specified and directed.
350
-
-
S&F GI Pipe medium grade 40mm dia including all fittings for fixing on wall/road crossing etc., complete all as specified and directed.
15
-
-
M&L for cutting the tarmac/hard standings and excavating in trenches across the road for laying cable including making good the excavated portion by means of PCC 1:3:6 type C2 matching with the surroundings complete all as specified and directed.
3
-
-
Supply and fixing cable jointing kit for 1.1 KV grade for cable termination, heat shrink type joint complete with jointing material and accessories suitable for 4 core XLPE armoured aluminium conductor cable of size 50 sqmm complete all as specified and as directed.
14
-
-
Supply and fixing cable jointing kit for 1.1 KV grade cable for straight through heat shrink type joint complete with jointing materials and accessories suitable for LT XLPE armoured aluminium conductor cable of size 4 core 16 sqmm to 50 sqmm complete all as specified and as directed.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements