Military Engineer Services Tender
To inquire about any e-tender the Andaman & Nicobar Islands government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder one can find every eprocurement Punjab tender on BidAssist. BidAassist has collated each and every Eproc Andaman & Nicobar Island Tender on its website. Looking for Andaman & Nicobar Island tenders online or going through the cumbersome government websites for it, has been made easier with the help of BidAssist.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date26 Jul 2024
Closing Date20 Sep 2024
Tender Amount₹ 27,50,000
Costs
EMD
₹ 55,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_661367_1Tender No
8143/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Dismantling stone slabs and tiles laid bedded and pointed in any mortor of any description or thickness in floors, aprons etc all as specified and as directed.
2.5
-
-
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and as directed.
13.3
-
-
Taking down cement or cement lime plaster, any description plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. all as specified and as directed.
155
-
-
Taking down chowkats or frame with shutters (without taking off shutters from the frame), n.exc 1.5 Sqm each complete all as specified and as directed.
30
-
-
Taking down chowkats or frame with shutters (without taking off shutters from the frame), exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as specified and as directed.
15
-
-
Disconnecting existing tanks of capacity exc 500 litres and n.exc 1000 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. all as specified and as directed.
4
-
-
Taking up or down steel tubing and connections including cleaning for removal to store bore of pipe 20 mm all as specified and as directed
10
-
-
Taking up or down steel tubing and connections including cleaning for removal to store bore of pipe
25 or 32mm all as specified and as directed
10
-
-
S & F steel tubes, medium grade 20mm bore galvanized with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
10
-
-
Refixing of old steel tubing obtained from taking down and connections in new or old position (wall, ceiling floors etc.,) of 20mm bore complete all as specified and directed.
5
-
-
S & F steel tubes, medium grade 32mm bore galvanized with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
10
-
-
Refixing of old steel tubing obtained from taking down and connections in new or old position (wall, ceiling floors etc.,) of 32mm bore complete all as specified and as directed.
5
-
-
S & F in repair Gun-metal, globe or gate valves of 32mm dia, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and as directed.
4
-
-
S & F aluminium anodised snap grid frame (with minimum 15 micron uniform anodic coating) size of 600 x 600 mm consisting of tee/ angle section, size 40x 40 x 2 mm thick as approved make conforming to IS-733 in frames of false ceiling including aluminium cleats with necessary CP brass/stainless shunk screws, aluminium perimeter angles fixed to wall frame at centre to centre and fixing frame to level adjusting anchors 6mm dia Gl wire hook in Tee members at 1.5 m centre to centre fixed to steel truss or roof complete all as snacified and as directed.
85
-
-
M & L for fixing in position 4 mm thick Non asbestos designer ceiling board of size 595 x 595 mm all as per manufacturer's specification complete all as specified and as directed.
85
-
-
S & F in repairs for anodised powder coated aluminium for door/ window/ ventilator/ partition frame and shutter for door/ window/ ventilator etc., with one or more rebates including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws and necessary locking arrangement complete all as specified and as directed. (min thickness of powder coating 50 micron)
440
-
-
M & L for 12 mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations fixed to aluminum doors / partitions all as specified and as directed.
25
-
-
S & F 4mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane all as specified and as directed.
21
-
-
S & F 4mm thick figured glass, pinhead glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane all as specified and as directed.
4
-
-
S & F aluminium deco grill of specified size complete including fixing for windows including all fixing clips and screws etc complete all as specified and as directed.
21
-
-
S & F solar control film 25 micron reflective type complete all as specified and as directed.
3
-
-
S & F door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed all as specified and as directed.
3
-
-
S & F for 200mm long aluminium anodised barrel tower bolt of extruded section all as specified and as directed.
30
-
-
S & F for 100mm long aluminium anodised barrel tower bolt of extruded section all as specified and as directed.
40
-
-
S & F for SS 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed all as specified and as directed.
60
-
-
S & F SS 75mm Butt hinges, medium weight, cold rolled mild steel, and fixed all as specified and as directed.
60
-
-
S & F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.
15
-
-
S & F for aluminium alloy, anodised, 300mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and as directed.
15
-
-
Cutting opening in cement concrete walls (any description) for door, window and other openings (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering, etc. all as specified and as directed
0.5
-
-
M & L for precast cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc 10 cm in width and set in CM (1:6) complete all as specified and directed.
4.3
-
-
M & L for rendering 15 mm thick in cement plaster (1:4) on fair faces of concrete surfaces, finished fair and even mixed with WPC as per manufacturer's instructions complete all as specified and directed. Note : WPC shall be measured and paid separately under respective item.
75
-
-
M & L for rendering 10 mm thick in cement plaster (1:6) on fair faces of concrete surfaces, finished fair and even all as specified and as directed.
50
-
-
M & L for rendering 5 mm thick in cement plaster (1:4) on ceiling surface finished fair and even all as specified and as directed.
30
-
-
M & L for providing chicken wire mesh of galvanised steel wire of minimum dia 0.71mm and size of mesh 12mm complete all as specified and as directed.
20
-
-
Excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out in hard dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm all as specified and as directed.
8
-
-
M & L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in foundation all as specified and as directed.
3.38
-
-
S & F rolled mild steel work as in single stanchions in vertical member, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections conforming to Fe-410 W (Gde E-250 Quality A all as specified and as directed.
250
-
-
S & F mild steel work in tubular trusses and tubular posts including special shaped washers etc., complete using butt welded tubes confirming to IS 1161- 1979 graded St 240 with one shop coat of zinc chromate primer paint all as specified and as directed.
260
-
-
S & F for rolled mild steel sections conforming to Fe 410-W (Gde E- 250) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters fixed with angle cleats or other connecting plates all as specified and as directed.
75
-
-
S & F aluminium corrugated sheeting 0.56mm thick alloy 31000 H4, STUCCO embossed finish with two corrugations side lap fixed with coach screw and aluminium washer in roof and wall etc., with end laps stitched with 25 x 6mm G.I. bolts at 20cm apart fixed with L-type or J-type or cranked hook bolts in lieu of screw all as specified and as directed.
9
-
-
S & F 0.56mm thick plain, aluminium sheeting, alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing all as specified and as directed.
2
-
-
S & F 3mm thick solid, compacted clear polycarbonate sheets of any colour as approved by GE fixed with coach/self taping screws and washer as in curved or plain roof with minimum overlap of 100mm in sides and 150mm in ends with necessary scaffolding including dismantling of existing old roof sheet complete all as specified and directed.
36.5
-
-
M & L for Hardcore of broken stone are boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and as directed.
3.2
-
-
M & L for providing 100mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in paving all as specified and as directed.
29.12
-
-
M & L for chequered cement concrete tiles 25mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors, laid over and including 15mm thick screed bed in CM (1:6) all as specified and as directed.
25
-
-
S & F in repair second class hard wood boarding 15mm thick, supplied & fixed with screws in any situation, planed one side with butt joints all as specified and as directed.
10
-
-
S & F Plain, 0.63mm thick galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 all as specified and as directed.
4.71
-
-
S & F grating doom 140mm dia of PTMT complete all as specified and as directed.
2
-
-
M & L for complete removal of existing treatment on wall complete all as specified and directed.
20
-
-
M & L for applying two coats of oil bound distemper over a coat of primer on new/ old plastered wall surface including preparation all as specified and as directed.
50
-
-
M & L for applying three coats of white wash on ceiling surface including preparation all as specified and as directed.
30
-
-
M & L for preparation of new or previously untreated surfaces of steel and iron surfaces of small articles such as rafter feet, brackets or cantilevers n.exc 30 cm projection and blocks, labels, etc. n.exc 0.1 Sqm each by applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome paint all as specified and directed.
3
-
-
M & L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome paint all as specified and as directed.
20.04
-
-
M & L for preparation of old painted surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome paint all as specified and as directed.
50
-
-
M & L for preparation of new or previously untreated surfaces of wooden surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.
5
-
-
M & L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over one coat of primer complete all as specified and as directed.
75
-
-
M & L for machine polishing to existing kota stone flooring using carboroundum stone of No. 60, followed by 120, 150 and final coat with 320 Grit stone to the desired finish complete all as specified and as directed.
Note :
(i) Sufficient quantity of water shall always be used during polishing to prevent scratches.
(ii) After each coat of polish with grit No. 60, 120 / 150 the surface to be applied with cement slurry of matching shade and cured before next polish is taken up.
(iii) After final polish with No. 320 stone, the surface to be cleaned with water and dried. (iv) Oxalic acid shall then be dusted over the surface @ 33 gms sprinkled with water and rubbed hard
75
-
-
M & L for Machine cut kota stone slab flooring 20-25mm thick, laid over and including 15mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
60
-
-
M & L for preparation of surface on the roof slab providing 5mm thick plaster in CM (1:3) using with WPC (3% weight of cement) over PCC (1:2:4) type B-0 25mm thick using with water proofing compound (3% weight of cement) to maintain existing slope complete all as specified and as directed.
Note :
(i) The unit rate shall be deemed to include the cost of removing the vegetation in roof slab and removing the plants, grass etc if any, preparation of roof surfaces by roughening to receive water proofing treatment and also cleaning the blokages in rain water pipes if any as required at site all as directed.
(ii) The rate for supply only the water proofing compound shall be measured and paid seperately
36.5
-
-
M & L for laying APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 by forced application complete all as specified and as directed.
36.5
-
-
S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19 x 19mm MS square tube and 1.2mm wall thickness complete all as specified and as directed.
9.9
-
-
S & F solid panel PVC door shutter 30mm thick (style consisting of frame made out of MS tube for top and bottom rail, MS frame shall be covered with heat moulded plain colour PVC'C' channel having a PVC sheet strip of 20mm width stuck inside with a solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either sides and as gap inserts for top and bottom ail paneling of plain colour PVC sheets to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specification and drawing complete all as specified and as directed.
3.15
-
-
S & F in repair European type WC (Pedestal Pattern) complete incuding pedestal pan and trap, connection to drain, flushing pipe, seat cover (excluding fixing bolt, flushing cistern) complete all as specified and as directed.
1
-
-
S & F in repair PVC valve less, syphonic action type flushing cistern, 10 litres, low level, white with inlet ball valve, float and handle including brackets complete all as specified and directed.
1
-
-
S & F PVC connections 15mm size 600mm long with PTMT nuts complete all as specified and as directed.
4
-
-
S & F in repairs angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight15mm-90gms)
4
-
-
S & F in repairs bib tap 15mm bore, fancy type, cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly screwed for iron and fixed complete all as specified and directed.
4
-
-
S & F in repairs pillar taps fancy type, cast copper alloy, with capstan head as chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipes and fixed complete all as specified and directed.
4
-
-
Supply only Integral waterproofing compound all as specified and as directed.
15
-
-
Dismantling floor, hearth or wall tiling, granite stone etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
127
-
-
M & L for vitrified tiles dark shade 10mm thick (square/rectangular) polished, area of each tiles exc 0.36 Sqm but n.exc 0.42 Sqm, in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) for laying floor finishes all as specified and as directed.
62
-
-
Description all as per Item No 74 above but in vertical wall surfaces, laid over and including rendering/ backing coat of 10mm thick in CM (1:4) complete all as specified and as directed.
10
-
-
M & L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exc. 0.11 Sq.m. but n. exc. 0.18 Sq.m. (400 x 400mm size), in floors etc., set and jointed in neat slurry and pointed in white or coloured cement to match for joint free tiles, laid over screed bed or bedding layer 15mm thick in CM (1:6) for laying floor finishes complete all as specified and as directed.
15
-
-
M & L for glazed ceramic tiles coloured of size 350 x 250 mm x 7mm /450 x 250 x 7mm thick on vertical surfaces of wall dado, skirting etc., set & jointed in neat cement slurry and pointed in white or coloured cement to match, laid over screed bed or bedding layer 10mm thick in CM (1:3) complete all as specified and as directed.
40
-
-
M & L for 4mm thick non asbestos fibre cement building board fixed to timber/GI/aluminium frame work with screws in ceiling including S & F anodised aluminium snap grid frame work of size 605mm x 605mm and aluminium sections for false ceiling main /cross tee of size 36.5mm x 25mm x 2.4mm weighing 0.24 Kg/RM and wall angle of size 38mm x 25mm x 2.4mm weighing 0.36 Kg/RM and including S & F hangers 4mm dia GI (upto 1200mm length) adjoining level fixed in roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete including dismantling old celing board complete all as specified and as directed.
30
-
-
Taking down wooden / aluminium / Iron / PVC chowkhats or frames with shutters (with out taking off shutter from frame) exc 1.5 Sqm and n.exc 4 Sqm each. complete all as specified and directed.
5
-
-
Taking down wooden / aluminium / Iron / PVC chowkhats or frames with shutters (with out taking off shutter from frame) n.exc 1.5 Sqm each complete all as specified and as directed.
5
-
-
S & F anodised aluminium powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 nos.) suitable handle (1 no.) complete all as specified and as directed.
0.6
-
-
S & F anodised aluminium powder coated window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc complete all as specified
0.6
-
-
S & F for anodised/aluminium frame three way of size 98mm x 38mm x 1.00mm thick or appropriate section as directed including with frame standard section for sliding type windows/ventilators with one or more rebates including joining cleats, beading, handle with locking arrangements, rubber gasket for fixing etc complete with and including two shutters with 5.5mm thick tinted glass n.exc 1 Sqm each panes and one with stainless steel wire mesh (window frame 3 track wt 0.50 Kg/RM and shutter having weight 0.45 Kg/RM) all as specifed and as directed.
6
-
-
S & F anodised aluminium door powder coated aluminium (minimum thickness of powder coating 50 micron) shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc including necessary suitable locking arrangements., complete all as specified and as directed.
10
-
-
M & L prelaminated particle board 18/19mm thick interior grade prelaminated both side with decorative choice lamination fixed with screws to aluminium frame work complete all as specified and as directed.
3
-
-
S & F 5.5mm thick sheet glass ordinary quality and glazing with oil putty in square exc. 0.5 Sq.m. in each pane complete all as specified and as directed.
3
-
-
S & F 3mm thick figured glass, pin headed type and glazing with oil putty in square n. exc. 0.5 Sq.m. in each pane complete all as specified and as directed.
0.8
-
-
S & F aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.
6
-
-
Supply and laying of 15 mm outer dia CPVC pipes SDR 11& Plain CPVC SDR 11 fittings on wall / ceiling or laid in floors including taking down of existing plumbing lines etc. complete all as specified and as directed.
25
-
-
Supply and laying of 25 mm outer dia CPVC pipes SDR 11& Plain CPVC SDR 11 fittings on wall / ceiling or laid in floors including taking down of existing plumbing lines etc. complete all as specified and as directed.
20
-
-
S & F in repairs Vitreous China water closet, couple closet of size 795 x 360 x 640mm complete with and including all accessories complete all as specified and as directed.
Make : Jaquar, Cat No: ARS-WHT-0313 or equivalent in Prayag/ Parryware/ Cera/ Hindware
2
-
-
S & F in repairs Vitreous China wash basin of size 175 x 56 0x 450mm complete with and including all accessorie including waste coupling, waste pipe etc complete all as specified and as directed.
Make : Jaquar, Cat No : CNS-WHT-WB03 or equivalent in Prayag/ Parryware/ Cera/ Hindware
2
-
-
S & F in repairs towel rail 600mm long complete all as specified and as directed. Make: Jaquar, Cat No: AQN-7711 or equivalent in Prayag/ Parryware/ Cera/ Hindware
2
-
-
S & F in repairs soap dish complete all as specified and as directed. Make: Jaquar, Cat No : AQN-7721 or equivalent in Prayag/ Parryware/ Cera/ Hindware
2
-
-
S & F in repairs Brass chromium plated shower rose with shower arm of size 125mm with swivel joints fixing to steel pipes complete all as specified and as directed.
2
-
-
S & F in repairs, 15mm dia. chromium plated stop valves, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
4
-
-
S & F in repairs PVC flexible connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.
4
-
-
S & F in repairs 600 x 450 mm looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround, mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws complete all as specified and as directed.
2
-
-
S & F grating round 140 mm size of PTMT, (minimum wt 50gms) outlet with grating including jointing with solvent cement complete all as specified and directed.
2
-
-
S & F in repairs PVC (SWR) pipes 110mm dia. single socketed in any length with rubber ring joints laid in trenches or floors complete all as specified and as directed.
3
-
-
S & F in repairs 110mm dia. PVC (SWR) plain bends any radius with or without access door as required complete all as specified and directed.
4
-
-
S & F for 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.
6
-
-
S & F in repairs PVC (SWR) multi floor trap 75mm dia. outlet with grating including jointing with solvent cement complete all as specified and directed.
2
-
-
M & L for rendering 10mm thick on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) on walls in CM (1:6) complete all as specified and directed.
30
-
-
M & L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over one coat of suitable thick wall care putty complete all as specified and as directed.
30
-
-
M & L for preparation of existing plastered surfaces and applying two coats of oil bound distemper over one coat of suitable thick wall care putty after complete removal of existing any type of treatment over wall complete all as specified and as directed.
60
-
-
Cutting chases, pinning in, making good to facing where required and pointing in CM (1:3) for concealed water tubing conduit wiring etc., and making good, cutting n.exc 10cm girth as in stone or concrete block walls complete all as specified and as directed.
25
-
-
M& L powder coated anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, including dismantling of old grill any type all complete as per requirement and direction of Engr-in-Charge.
25
-
-
S & F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain PVC sheet reinforced with MS square tube & edges will be painted to match with printed sheets, supplying & fixing in opening as per specification complete all as specified and as directed.
4.9
-
-
S & F factory made solid PVC moulded door shutter 28 to 30 mm thick (stile) with 2,4 or 6 raised panel design with 20mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core as per specification complete all as specified and as directed.
1.6
-
-
S & F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.
4
-
-
S & F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
2
-
-
S & F 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements