Military Engineer Services Tender
... More
To inquire about any e-tender the Andaman & Nicobar Islands government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder one can find every eprocurement Punjab tender on BidAssist. BidAassist has collated each and every Eproc Andaman & Nicobar Island Tender on its website. Looking for Andaman & Nicobar Island tenders online or going through the cumbersome government websites for it, has been made easier with the help of BidAssist.
Military Engineer Services - MES Tender
Civil And Construction
Road Construction
Eprocure
Opening Date31 Jan 2025
Closing Soon6 Mar 2025
Tender Amount₹ 1,38,00,000
Costs
EMD
₹ 2,13,000Document Cost
₹ 1,000Tender Fee
Refer Documents
Summary
81178 Addn/altn And Special Repairs To Path And Connected Works Near Bldg No T-77a
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_695671_1Tender No
81178 ADDN/ALTN AND SPECIAL REPAIRS TO PATH AND CONNECTED WORKS NEAR BLDG NO T-77ATender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.11 Sqm but n. exc 0.18 Sqm as in vertical surface such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:3 to recieve tiles complete all as specified and directed.
85
-
-
... More
M&L for coloured Glazed ceramic tiles in vertical surfaces 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over and including 10mm thick rendering or bedding layer of cement mortar 1:3 complete all as specified and directed.
208
-
-
... More
Excavation in trenches n. exc 1.5m wide and n. exc 1.5m in depth in hard/dense soil for foundation, etc or for shafts, wells, cesspits, manholes, pierholes, etc n. exc 10 Sqm on plan and getting out complete all as specified and directed.
103
-
-
... More
Surface excavation n. exc 30 cm deep and averaging 15cm deep in any type of soil and getting out complete all as specified and directed.
240
-
-
... More
M&L for removing excavated material (any type of soil) to a distance n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed.
100
-
-
... More
M&L for returning filling in hard/dense soil including spreading levelling watering and well ramming in layers n. exc 25cm thick complete all as specified and directed.
49.1
-
-
... More
Excavating in post holes in hard dense soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.
3
-
-
... More
M&L for cement concrete 1:2:4 (using 20mm graded aggregate) as in foundation of posts, railings and similar works complete all as specified and as directed.
0.6
-
-
... More
M&L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in levelling course complete all as specified and as directed.
30
-
-
... More
M&L Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations or mass concrete complete all as specified and as directed.
6.2
-
-
... More
Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.
12.1
-
-
... More
M&L 14-16mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
67
-
-
... More
M&L 14-16mm Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
13
-
-
... More
M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed by Engr-in-Charge.
110
-
-
... More
M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm) including making drainage opening wherever required complete all as specified and directed.
6
-
-
... More
M&L for preparation of newly plastered or concrete surfaces of any description over 10cm girth or width, not otherwise described and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and as directed.
15
-
-
... More
M&L for chequered cement concrete tiles of size 30cm X 30cm X 25mm thick with grey cement and pigments set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed.
719
-
-
... More
M&L for chequered cement concrete tiles of size 30cm X 30cm X 25mm thick with grey cement and pigments set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in skirting/dado over and including 10mm thick backing coat in CM 1:3 complete all as specified and directed.
7
-
-
... More
Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern in roof coverings complete all as specified and directed.
207
-
-
... More
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.
199
-
-
... More
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges, fixed with self tapping screws all as specified and directed.
8
-
-
... More
M&L aluminium wind tie of any size fixed with self tapping screws of size 50/75mm with integral EPDM washer in roof covering all as specified and directed.
63
-
-
... More
Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.
19.85
-
-
... More
S&F framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar works like cooler stand conforming to Fe-290, Gde -E-165 complete all as specified and directed.
740
-
-
... More
M&L for mild steel works as posts and struts in fencing including cutting tops as required drilling holes, notching for wires and similar works conforming to Fe-290, Gde -E-165 complete all as specified and directed.
50
-
-
... More
S&F mild steel roof trusses (framed), trrussed, purlins, crane gantries, rails and fastenings and heavy bracket framming (Beam,Tee, Angle, Channels or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.
1050
-
-
... More
S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde-E-250) quality-A complete all as specified and directed.
115
-
-
... More
S&F for stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc of required size on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
655
-
-
... More
M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in item 04028, water troughs and the like including weathering, holdfast, slightly rounded or chamfered angles and throating complete all as specified and as directed.
1.6
-
-
... More
M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and directed.
64
-
-
... More
M&L for applying two coat of synthetic enamel paint including preparation of old steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and directed.
16
-
-
... More
M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, not otherwise described and applying one coat of synthetic enamel paints over 10cm width or girth complete all as specified and as directed by Engr-in-Charge.
2
-
-
... More
M&L for 15mm thick plaster on RCC roof slab in CM 1:4 including liquid water proofing compound @ 200ml per 50 Kg cement bag finished even and smooth without using extra cement complete all as specified and directed.
(Note : WPC shall be measured and paid seperately)
164
-
-
... More
Supply only liquid water proofing compound
27
-
-
... More
M&L for applying a coat of cold bituminous primer over cleaned surface @ 0.30 Kg/Sqm and applying one coat of hot blown bitumen 85/25 grade @ 1.2 Kg/Sqm over primer followed by APP modified polymeric membrane 3mm thick, minimum weight not less than 3 Kg/Sqm, reinforced with polyester non-woven fabric weight not less than 150 Gm/Sqm laid as per the manufacturer's instruction with side over lap of 100mm and end over lap of 150mm, tucked into the chases on vertical surfaces and painting over APP membrane sheet with aluminium paint @ 0.10 Kg/Sqm complete all as specified and directed.
164
-
-
... More
Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed.
74.2
-
-
... More
M&L for hardcore of broken stone or boulders of gauge n. exc 63 mm deposited spread and levelled in layers n. exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.
32
-
-
... More
M&L for 75mm thick PCC 1:3:6 type C1 (Using 20mm graded stone aggregate) as in plinth protection/path laid in panels, finish the top surfaces even and smooth without using extra cement complete including filling the joints with mastic compound all as specified and directed.
44
-
-
... More
M&L for PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate) as in mass concrete, sunken floor complete all as specified and directed.
3
-
-
... More
M&L 15mm thick rendering in cement mortar 1:3 as in sunken floors mixed with liquid water proofing compound @ 200ml per 50 Kg cement bag finishing the surface fair and even complete all as specified and as directed.
(Note : WPC shall be measured and paid separately)
30
-
-
... More
M&L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in coping, edging including necessary form work complete all as specified and directed.
1
-
-
... More
M&L PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in levelling course, padding, sunken, coping portion rounded chamfered on edge complete all as specified and directed.
9
-
-
... More
M&L for 100mm thick PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as in path finish the top surfaces even and rough to receive top layer complete all as specified and directed.
749
-
-
... More
M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in surface channel or drain or benching in manhole including necessary formwork complete all as specified and directed.
7
-
-
... More
M&L for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitered/stopped ends etc complete all as specified and directed.
75
-
-
... More
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
1.7
-
-
... More
M&L for nominal mix RCC 1:1.5:3 type A1 (using 20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, chajja/facia and the like complete all as specified and directed.
1.7
-
-
... More
M&L for nominal mix RCC 1:1.5:3 type A1 (using 20mm graded crushed stone aggregate) in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
32
-
-
... More
M&L for nominal mix RCC 1:1.5:3 type A1 (using 20mm graded stone aggregate) in Walls, retaining walls, basement walls, ballast walls and the like, any thickness above top of footings, including attached pilaster and buttresses complete all as specified and directed.
30
-
-
... More
M&L formwork for rough finished flat surface to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
14
-
-
... More
M&L formwork rough finished surface of concrete to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work n. exc 10 cm wide complete all as specified and directed.
54
-
-
... More
M&L formwork for rough finished flat surface to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter complete all as specified and directed.
60
-
-
... More
M&L formwork for rough finished flat surface to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc, vertical or to batter complete all as specified and directed.
180
-
-
... More
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
1795
-
-
... More
Demolition of precast cement concrete block walling built in CM or cement lime Mortar complete all as specified and as directed.
35
-
-
... More
M&L precast cement concrete block masonry exc 10 cm width with solid block PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) and setting in cement mortar 1:4 all as specified
36
-
-
... More
M&L for precast cement concrete louveres and jallies 100mm thick (measured solid), including all mouldings, type B0, 1:2:4 (using 12.5mm graded stone aggregate) and set in cement mortar 1:4 all as specified and directed.
5
-
-
... More
Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
1243
-
-
... More
M&L for 10mm thick plaster in CM 1:6 on fair face of concrete surface or brick walls finished even and smooth without using extra cement complete all as specified.
500
-
-
... More
M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of average 1mm thick wall care putty to make the surface smooth complete all as specified and directed.
500
-
-
... More
M&L for applying two coats of oil bound distemper over a coat of average 1mm thick wall care putty to make the surface smooth after complete removal of existing treatment complete all as specified and directed
1230
-
-
... More
Cutting out existing cracks in concrete surfaces/masonry wall/slab forming grooves of 25mmx40mm size, cleaning the groove thoroughly with blower, applying primer coat of the mix of IPH CC or Hydroseal siliconate epoxy resin and hardner in equal proportion with spray gun suitable brush to form a film on the surface of groove, filling the groove with putty made by mixing IPH CC in equal proportion of make Harjas coating and polymers or hydroseal siliconate epoxy resin hardner and admixture in the proportion of 1:1:2 and finally applying the sealing coat of the same mix and in the manner primer coat is applied with following minimum coverage per running meter of groove :-
Material : Priming coat putty filling seal coat, Resin 60gms 100gms 40gms, Hardner 60gms 100gms 40gms, Admixture 400gms
20
-
-
... More
M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls or concrete surface including mixing of liquid water proofing compound @ 200ml per 50 Kg cement bag, finished the surface even and smooth without using extra cement complete all as specified. (Note: Water proofing compound shall be measured and paid separately)
400
-
-
... More
M&L for 15mm thick plaster in CM 1:4 on fair face of concrete surface or brick walls finished even and smooth without using extra cement complete all as specified
165
-
-
... More
M&L for preparing newly plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed
540
-
-
... More
M&L for complete removal of existing treatment on plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed
605
-
-
... More
M&L for 10mm thick plaster in CM 1:3 on concrete ceiling surfaces finished even and smooth without using extra cement complete all as specified
220
-
-
... More
M&L for preparation of newly plastered ceiling surface and applying two coats of oil bound distemper of approved tint over a coat of average 1mm thick wall care putty complete all as specified and directed
220
-
-
... More
M&L for applying two coats of oil bound distemper of approved tint over a coat of average 1mm thick wall care putty on ceiling after complete removal of existing treatment complete all as specified and directed
390
-
-
... More
Taking down chowkhats or frames area n. exc 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed
71
-
-
... More
Taking down Chowkats exc 1.5 Sqm but n. exc 4 Sqm each with shutters (Without taking off shutters from the frame) complete all as specified and directed
76
-
-
... More
Taking down shutter of any description n. exc 1 Sqm each complete all as specified and directed
1
-
-
... More
Taking down shutter of any description exc 1 Sqm but n. exc 2 sqm each complete all as specified and directed
1
-
-
... More
Taking down shutter of any description n. exc 1 Sqm each and refixing in the same opening including resecuring or easing of door shutters for easy closing/ opening, end tightening of butt hinges in position, adjustment of butt hinges in position, adjustment of existing aluminium mongry complete all as specified and directed
1
-
-
... More
Taking down shutter of any description exc 1 Sqm but n. exc 2 sqm each and refixing in the same opening including resecuring or easing of door shutters for easy closing/ opening, end tightening of butt hinges in position, adjustment of butt hinges in position, adjustment of existing aluminium mongrycomplete all as specified and directed
1
-
-
... More
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm both side prelam PVC sheet and edges will be painted to match with the prelam sheet reinforced with MS square tube in opening incl necessary fixing arrangements as per specification and drawing complete all as specified and directed
102
-
-
... More
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded prelam PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail and bottom rail on either side as gap insert for top rails, bottom rail, panelling of both side prelam PVC sheet to be fitting in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement in the frame at site as per specification and drawing complete.
25
-
-
... More
M&L for anodised aluminium frame for doors, windows, ventilators, partition with one or more rebates including joining cleat for fixing etc complete as specified
1371
-
-
... More
M&L for anodised aluminium door shutters, aluminium section weighing not less than 1.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, tower bolts, anodised aluminium snap beading screws etc complete all as specified.
Note : Supply only floor spring, glass, SS friction hinges, particle board, wire gauze will be measured seperately
114
-
-
... More
M&L for anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified complete all as specified.
Note : Supply only glass, particle board, wire gauze will be measured seperately
3
-
-
... More
M&L for anodised aluminium window and ventilator shutters, side hung/sliding type without sash bars, aluminium sections weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays/Imax hinges 01 No, hinges type B-21 100mm long 02 Nos suitable handle 01 No per shutter or as required etc complete all as specified Note : Supply only glass, particle board, wire gauze will be measured and paid seperately
124
-
-
... More
S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed
120
-
-
... More
M&L for aluminium composite panel sheet of 3mm thick with skin thickness of 0.25mm of aluminium both sides, sandwiched with 2.5mm thick polyethylene core with PVDF coating of 30 micron fixed over frame made up of aluminium hollow section of size 25x50mm, 2mm thick, duly fixed to wall/ceiling with expansion fastener having panels n. exc 1200x1200mm with necessary fitting, in approved pattern as in columns,beams and walls complete all as specified and directed.
Note (i) The quoted rate shall deemed to include the cost of necessary scaffolding required for three storeyed building.
(ii) The quoted rate shall deemed to include the cost of Aluminium work.
4
-
-
... More
S&F door closer hydraulically regulated aluminium (die cast) body, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed.
8
-
-
... More
S&F in repair door closer hydraulically regulated aluminium (die cast) body, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed.
27
-
-
... More
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.
50
-
-
... More
S&F for anodized aluminum snap grid frame work for false ceiling incl hangers 6mm dia/3mm dia GI wire (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60 mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and as directed.
50
-
-
... More
M&L for 4mm thick non asbestos fiber cement building design board of size 605x605mm fixed or laid to aluminum grid work with screws and including preparation of surface with two coat of oil bound distemper over a coat of chalk whiting primer complete all as specified and as directed.
50
-
-
... More
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone or steel/ aluminium frame concrete or brick surrounds, glazed complete all as specified and directed.
2
-
-
... More
S&F figured glass, pin head type sheet glass 4 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window/ventilator shutter not exc 0.5 Sqm in each pane complete all as specified and directed.
3
-
-
... More
Supply only sheet glass 4 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window/ventilator shutter not exc 0.5 Sqm in each pane complete all as specified and directed.
51
-
-
... More
Supply only 12mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work complete all as specified and directed.
68
-
-
... More
Supply only aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.4mm and fixed with aluminium wire staples all as specified and directed.
68
-
-
... More
S&F in repair aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.4mm and fixed with aluminium wire staples all as specified and directed.
2
-
-
... More
S&F 100mm stainless steel Hasp and staple, including bolt to hinge plate and fixed with screws all as specified and as directed .
24
-
-
... More
S&F stainless steel IMAX hinges for aluminium window shutters complete all as specified and directed.
162
-
-
... More
S&F 100mm size stainless steel butt hinges medium weight complete all as specified and directed.
174
-
-
... More
S&F 150mm aluminium, anodised, barrel tower bolts of extruded section all as specified and directed.
44
-
-
... More
S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised all as specified and directed.
44
-
-
... More
S&F 250mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.
44
-
-
... More
S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 140mm overall length of cover plate complete all as specified and directed.
6
-
-
... More
S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 140mm overall length of cover plate complete all as specified and directed.
27
-
-
... More
Dismantling PVC water tanks exc 500 Ltr but n. exc 1000 Ltr capacity and removing to store complete all as specified and directed.
9
-
-
... More
S&F double layer rotational moulded PVC water storage tank cylinderical, vertical with closed top hoisted and fixed in position tank capacity 1000 Ltr with and including PTMT float valve 20mm dia and making connection for inlet and outlet complete all as specified and directed.
9
-
-
... More
Taking up or down 15 mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed.
94
-
-
... More
S&F 20mm outer dia CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including suitable reducer for 15mm dia taps fitting as required complete all as specified and directed.
94
-
-
... More
M&L for Cutting chases in stone, concrete block or slab walls, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth complete all as specified and directed.
94
-
-
... More
Taking up or down 20 mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed.
195
-
-
... More
S&F 25mm outer dia CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including suitable reducer for 15mm dia taps fitting as required complete all as specified and directed.
195
-
-
... More
S&F 25mm bore gun matel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified and directed.
6
-
-
... More
S&F in repair 25mm bore gun matel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified and directed.
6
-
-
... More
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.
147
-
-
... More
S&F PVC (SWR) pipe 110mm bore, single socketed, in any length including bends, socket etc with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed.
47
-
-
... More
S&F PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors complete all as specified and directed.
33
-
-
... More
S&F PVC (SWR) 110mm dia bend of any radius and jointed with approved adhesive complete all as specified and directed.
5
-
-
... More
S&F PVC (SWR) 110mm dia junction single (single T) equal or unequal and jointed with approved adhesive complete all as specified and directed.
15
-
-
... More
S&F PVC (SWR) vent cowl 110mm dia jointed with approved adhesive complete all as specified and directed.
5
-
-
... More
S&F PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive fixed to walls complete all as specified and directed.
55
-
-
... More
S&F PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors complete all as specified and directed.
32
-
-
... More
S&F PVC (SWR) bend 75mm dia of any radius as required and jointed with approved adhesive complete all as specified and directed.
7
-
-
... More
S&F PVC (SWR) 75mm dia junction single (single T) equal or unequal and jointed with approved adhesive complete all as specified and directed.
21
-
-
... More
S&F in repair 75mm outlet dia PVC (SWR) floor trap with grating including jointing with solvent cement to waste pipe complete all as directed.
36
-
-
... More
M&L for Cutting holes into or through brick walls built in cement mortar superficial area exc 150 Sqcm but n. exc 400 Sqcm and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed.
298
-
-
... More
S&F in repairs vitreous china wash down water closed pan (Pedestal pattern) white, including connection to drain (or out going pipe) and to flush pipe, antisypthonic (excluding flushing cistern and flush pipe) complete all as specified and directed.
15
-
-
... More
S&F plastic water closet seat cover, white, closed pattern with flat bottom including mild steel chromium plated or aluminised hinging device complete all as specified and directed.
6
-
-
... More
S&F in repair plastic water closet seat cover, white, closed pattern with flat bottom including mild steel chromium plated or aluminised hinging device complete all as specified and directed.
9
-
-
... More
S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and directed.
15
-
-
... More
S&F in repair vitreous china counter wash hand basin oval shape of size 550x400mm including brackets, 32 mm CP waste coupling, chain and plug, waste fittings all necessary inlet and out let connections complete all as specified.
15
-
-
... More
S&F in repair PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified.
36
-
-
... More
S&F in repair 32 mm dia PVC flush pipe of polyethylene of low or high density for WHB, sink, urinal complete all as specified and directed.
15
-
-
... More
S&F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
6
-
-
... More
S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
9
-
-
... More
S&F in repair chromium plated brass shower roses with or without swivel joints square type 125mm size including shower arm complete all as specified and directed.
15
-
-
... More
S&F in repair 20 mm dia brass stainless steel tubular towel rail D type 600mm long complete all as specified and directed.
15
-
-
... More
S&F chromium plated soap dish of size 120x80mm, fixed to plugs with chromium plated brass screws complete all as specified and directed.
6
-
-
... More
S&F in repair chromium plated soap dish of size 120x80mm, fixed to plugs with chromium plated brass screws complete all as specified and directed.
9
-
-
... More
S&F in repair curtain rods 25mm dia, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.
146
-
-
... More
S&F in repair 600x450x6mm thick looking mirror bevelled edge of selected quality glass fixed with stainless steel glass fastner complete all as specified and directed.
24
-
-
... More
S&F stainless steel hanger of size 450x3.5x1mm thick having minimum 6 pegs suitable for hanging cloths and fixed with minimum 2 Nos stainless screws complete all as specified complete all as specified and directed.
6
-
-
... More
S&F in repair stainless steel hanger of size 450x3.5x1mm thick having minimum 6 pegs suitable for hanging cloths and fixed with minimum 2 Nos stainless screws complete all as specified complete all as specified and directed.
18
-
-
... More
S&F CP corner glass shelf with bracket complete all as specified and directed.
6
-
-
... More
S&F Toilet paper holder complete all as specified and directed.
6
-
-
... More
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and directed.
6
-
-
... More
S&F in repair 15mm dia cast copper alloy chromium plated long body bib tap fancy type with wall flange complete all as specified and directed.
33
-
-
... More
S&F in repair two way bib cock, 15mm dia cast copper alloy chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed.
15
-
-
... More
S&F in repair 15mm dia cast copper alloy, chromium plated pillar tap with fly nut capstan head screwed fancy type for 15mm bore dia of pipe complete all as specified and directed.
9
-
-
... More
S&F in repair WHB mixer, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, with long shank with central hole screwed down, screwed both ends for iron pipe or for unions complete all as specified and as directed.
6
-
-
... More
S&F in repair 15mm Stop valve angle cock cast copper alloy, fancy type, chromium plated with long shunk and cup high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.
48
-
-
... More
S&F in repair 15mm concealed type angle cock cast copper alloy, fancy type, chromium plated with long shunk and cup high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.
15
-
-
... More
Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.
321
-
-
... More
Taking down fuse Unit/DBs 415 Volt/230 Volt complete all as specified and directed.
16
-
-
... More
Taking down old aluminium sub main wiring of any size complete all as specified and directed.
444
-
-
... More
Material and labour for point wiring for one light point or one fan point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core, PVC insulated & unsheathed cable, FRLS, 1100 volts grade in and including concealed / surface as possible PVC conduits (Medium grade) of size not less than 20 mm dia incl proper colour coding Phase -red/yellow/blue, neutral- black and earth green all as directed with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories for modular fittings like cover plate with frame and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed. Note :- The unit rate quoted shall deemed to include the cost of following :-
(a) GI metal flush box of minimum thickness of 1.6mm and modular cover plate with frame of any module complete.
(b) Proper colour coding is to be followed as per IS specification.
(c) Wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement. Contd......./-
-
-
-
... More
Contd..../-
(d) Electric wiring test after completion of wiring to be submitted before claiming the payment.
(e) Cutting chases in wall/floor beam/ceiling to be concealed conduit and making good the disturbed surfaces.
-
-
-
... More
One light/fan point controlled by one way switch 5 Amps.
180
-
-
... More
One switch socket 3 pin 6 Amps flush type on independent board.
42
-
-
... More
One 3 pin socket outlet 6 Amps flush type on the same board with other switches.
72
-
-
... More
One light point controlled by two way switch.
4
-
-
... More
One bell point controlled by one bell push switch 5 Amps one way.
15
-
-
... More
All as per Item No 156 here-in-before but with two single core 4 Sqmm FRLSH cable one 4.0 Sqmm green colour cable as earth continuity conductor for one socket 6 pin 16 Amps flush type/ Metal clad switch on independent board complete all as specified and directed.
27
-
-
... More
S&F for switch modular type, 6 Amps 1 module, 230 volts AC circuit complete all as specified and directed.
284
-
-
... More
S&F for switch modular type, 16 Amps 1 module, 230 volts AC circuit complete all as specified and directed.
27
-
-
... More
S&F for socket outlet modular type 1 way 6 Amps, 3 pin, 230 volts AC circuit complete all as specified and directed.
104
-
-
... More
S&F Socket outlet 2 in 1 modular type, 3 pin, 6 and 16, universal complete all as specified and directed.
27
-
-
... More
S&F Switch modular type, single pole two way 5 amps complete all as specified and directed.
8
-
-
... More
S&F bell push switch modular type, flush type, single pole, 5 Amps, 240 volts AC complete all as specified and directed.
15
-
-
... More
S&F for ceiling rose, 3 phase, PVC polycarbonate, isolated body complete all as specified and directed.
143
-
-
... More
S&F Electric Bell, ding dong type working on 230 volts AC supply complete all as specified and directed.
15
-
-
... More
S&F stepped type electronic fan regulator modular type complete all as specified and directed.
30
-
-
... More
S&F 30 watts LED building security light fittings, IP 65 luminaire, Pressure die cast aluminium housing powder coated graphite grey and toughened glass including necessary fixing arrangements as per site requirements all as specified and directed by Engr-in-Charge.
10
-
-
... More
Taking down old corroded GI bracket of 25 mm dia and supply and fixing new GI brackets of GI pipe light grade of size 25 mm dia including nuts, bolts and washers for building security light complete all as specified and directed.
10
-
-
... More
Supply, fixing and testing Tube light fittings LED 20 watts 4 feet including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed.
55
-
-
... More
Supply, fixing and testing Tube light fittings LED 10 watts 2 feet including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed.
36
-
-
... More
Taking down carefully fan of ceiling fan/ exhaust fan/ air circulation fan of any size / cap from its location, handed over to AGE E/M store yard without any damage complete all as specified and directed.
24
-
-
... More
Taking down carefully ceiling fan of any make, size from its location, dismantling complete, examine complete parts thoroughly, oiling, greasing all parts and complete overhauling of fan including replacement of small parts such as split pin, nut bolt, screws and assembling back the fan, make fully functional, re-fixing the fan to its position including replacing and providing of twin core copper wire 23/0.0076 from fan to ceiling rose and painting the fan with same colour of fan complete all as specified and directed.
18
-
-
... More
S&F BLDC 5 star rated ceiling fan metallic body ISI marked 1200 mm sweep, 220V Ac, 50 Hz complete with all accessories complete all as specified and directed.
12
-
-
... More
S&F air ventilating fan 200 mm sweep single ph, 230 volt, PVC body with louvers incl all fixing arrangement complete all as specified and directed.
6
-
-
... More
S&F high speed air ventilating fan 300 mm sweep single ph, 230 volt, steel body with louvers incl all fixing arrangement complete all as specified and directed.
6
-
-
... More
S&F decorative, wall mounting, brushed nickel finish fixture with acrylic diffuser suitable with 9 W LED lamp B22 base complete all as specified and directed.
12
-
-
... More
S&F Decorative, wall mounting, champagne gold finish fixture with plastic body including 9 W LED lamp B22 base, white/warm as required at site including fixing rangement of light fittings complete all as specified and as directed.
18
-
-
... More
S&F Sub main wiring with PVC FRLS insulated cable 2 single core 6 sqmm 1100 V grade with stranded copper conductor cable using proper colour coding Phase Red/Yellow/Blue, Neutral- black and earth- green in and incl rigid PVC conduit concealed in wall (ISI marked) incl all specials like joint elbow, Tee ,junction , bend etc and provision of PVC insulated copper conductor single core 6.0 sq mm for earth continuity complete all as specified and directed.
215
-
-
... More
S&F Sub main wiring with PVC FRLS insulated cable 2 single core 4 sq mm 1100 V grade with stranded copper conductor cable using proper colour coding Phase Red/Yellow/Blue, Neutral- black and earth- green in and incl rigid PVC conduit concealed in wall (ISI marked) incl all specials like joint elbow, Tee, junction, bend etc and provision of PVC insulated copper conductor single core 4.0 sqmm for earth continuity complete all as specified and directed.
229
-
-
... More
Supply & fix motor starter switch of capacity 25 Amps working on 240 volts AC supply alongwith with 25 Amps mini MCB SP type 'C' 240 volts for air conditioner complete all as specified and directed.
6
-
-
... More
S&F DB VTPN sheet metal enclosure double door suitable for incoming upto MCCB 100 Amps/125 Amps & outgoing MCB TP / SP (IP-43) Protection Triple pole and neutral 415 V 4 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete all as specified and directed.
2
-
-
... More
S&F SPN DB sheet metal enclosure double door suitable (IP-43) Protection 8 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete all as specified and directed.
15
-
-
... More
Supply and fixing 4 pole MCCB 100 Amp, 50 Hz, 415V with rupturing capacity 25 KA complete all as specified and directed.
2
-
-
... More
Supplying & fixing MCB SPN 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.
15
-
-
... More
Supplying & fixing MCB single pole, 6 to 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.
82
-
-
... More
M&L Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface with or without reinforcement complete all as specified and as directed by Engr-in-Charge.
320
-
-
... More
Supply and fixing of metal box, flush type,1.6 mm thick suitable for 4 module all as specified and directed by Engr-in-Charge.
6
-
-
... More
Supply and fixing of White cover plate with frame suitable for 4 module all as specified and directed by Engr-in-Charge.
6
-
-
... More
Supply, laying, testing and commissioning of LT XLPE insulated, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of cross section 35 Sqmm 3.5 core (laid on floor/Roof/wall in proper saddling all as specified and directed.
130
-
-
... More
Supply and laying/fixing in trenches, cable ducts ,clamping on wall or any place DWC HDPE pipe of size 50 mm(OD) x 38mm (ID) along with connected accessories like couplers.bends,end caps etc for LT cable protection all as specified and directed.
128
-
-
... More
Excavation in trenches not exc 1.5m deep and 1.5m width and getting out in soft or loose soil for foundation of poles (or) cable laying complete all as specified and directed.
10.1
-
-
... More
M&L for cutting the road/ footpath/ hard standing etc for laying of pipe all as directed by Engr-in-Charge.
5
-
-
... More
Earthing complete with galvanised earth plate electrode 60 cm x 60cmx 6.15 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level, connected to GI earth wire 4 mm dia as earthling lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel with wire mesh, CI cover with frame etc including necessary excavation in any type of strata , returning, filling removal of soil outside MD land, filling of charcoal and salt complete all as shown in electrical plate No 3 of MES Sch Part I, connected to Earthing test point all as specified and directed on testing on completion.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%