Military Engineer Services Tender
To inquire about any e-tender the Andaman & Nicobar Islands government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder one can find every eprocurement Punjab tender on BidAssist. BidAassist has collated each and every Eproc Andaman & Nicobar Island Tender on its website. Looking for Andaman & Nicobar Island tenders online or going through the cumbersome government websites for it, has been made easier with the help of BidAssist.
Military Engineer Services - MES Tender
Manpower Supply
Eprocure
Opening Date10 Oct 2024
Closing Date14 Nov 2024
Tender Amount₹ 47,50,000
Costs
EMD
₹ 95,000Document Cost
₹ 500Tender Fee
Refer Documents
Summary
Day To Day Maint And Repair/ Maint To Joinery, Flooring, Roof Sheeting And Other Allied Works At Ins Utkrosh Under Age B/r-ii In Ge Minnie Bay Port Blair
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_679106_1Bid Award Id
ViewTender No
8432/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Supply and fixing 15 mm outer dia CPVC pipes of pressure rating 10kgf/cm2 fixed on walls ,ceilings or in floors etc complete all as specified and directed by Engineer-in-Charge.
150
-
-
All as per item no 4 above but 20 mm bore CPVC pipe complete all as specified and directed by Engineer-in-Charge.
200
-
-
All as per item no 4 above but 25 mm bore CPVC pipe complete all as specified and directed by Engineer-in-Charge.
95
-
-
All as per item no 4 above but 32 mm bore CPVC pipe complete all as specified and directed by Engineer-in-Charge.
95
-
-
Material and Labour for cutting chases in concrete block walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing etc., and making good, cutting not ecx 10 cm girth complete all as specified and directed by Engineer-in-Charge.
50
-
-
Disconnecting water tubings near water tanks, taking out old rusted GI tube short lengths (nipples) embedded in RCC tank walls as out lets/inlets by chiselling and replacing with new nipples, making good with cement concrete 1:2:4 and refixing of tubing all as directed by Engineer-in-charge. Note:Supply only of new nipple/long screw shall be measured & paid separately
5
-
-
S&F in repairs 32mm waste fittings, brass, chromium plated for glazed ware sinks and basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end complete all as specified and directed by Engineer-in-Charge.
50
-
-
S&F in Repairs 40mm waste fittings, brass, chromium plated for glazed ware sinks and basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end complete all as specified and directed by Engineer-in-Charge.
20
-
-
S&F in repairs 15mm bore bib tap cast copper alloy fancy type chromium plated screwed complete all as specified and directed by Engineer-in-Charge.
50
-
-
Fixing only in repairs bib cock including cleaning, removing of air block etc of any type and size complete all as specified and directed by Engineer-in-Charge.
50
-
-
S&F in repairs vitreous china wash basin, white flat back of size 550mm x400mm, excluding tap including bracket complete all as specified and directed by Engineer-in-Charge.
8
-
-
S&F in repairs vitreous china wash basin, white flat back of size(mm) 600x480x195mm including all fixing accessories complete all as specified and directed by Engineer-in-Charge.
5
-
-
S&Fin repairs 25mm ball brass valve high pressure of polyethene float and fly nut complete screwed for iron pipe and fixed, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.
5
-
-
All as item No. 16 above, but 20mm dia bore complete all as specified and directed by Engineer-in-Charge.
5
-
-
S&F in repairs (Non fancy type )Angluar stop cock cast copper alloy screwed down high pressure with crutch or butterfly handle screwed ends for pipe or union fixed for 15mm/20mm bore)complete all as specified and directed by Engineer-in-Charge.
30
-
-
S&F in repairs( fancy type ) Angular stop cock cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for pipe or union fixed for 15mm/20mm bore complete all as specified and directed by Engineer-in-Charge.
25
-
-
S&F in repairs 15mm bore stop valves cast copper alloy chromium plated with long shank and cup (concealed type) fancy type screwed down high pressure screwed both ends for pipe or union fixed including necessary cutting and making good wall or floor tiling to match existing complete all as specified and directed by Engineer-in-Charge.
20
-
-
Fixing only in repairs stop cock (Non fancy type )size after cleaning and removing of blockage complete all as specified and directed by Engineer-in-Charge.
50
-
-
Fixing only in repairs stop cock (Fancy type ) and size after cleaning and removing of blockage complete all as specified and directed by Engineer-in-Charge.
20
-
-
Supply and fixing in repair vitreous China squatting pan Orissa pattern, size 580x440mm, white with integral foot rest (excluding flusing cistern and flsh pipe) including provision of lime concrete bedding and making good to the floor, complete all as specified and as directed by Engineer-in-Charge.
5
-
-
Fixing only in repairs by replacing minor parts like flushing knob, float, screws etc of PVC flush tank low level cistern, 10 ltr capacity, including connecting to existing water supply line and water closet pan complete all as specified and directed by Engineer-in-Charge.
40
-
-
S&F in repairs 20mm gun metal gate valves with iron wheel head screwed both ends for iron pipe complete all as specified and directed by Engineer-in-Charge.
10
-
-
S&F in repairs 25mm gun metal gate valves with iron wheel head screwed both ends for iron pipe complete all as specified and directed by Engineer-in-Charge.
10
-
-
S&F in repairs PVC flexible connection, of 15mm and 450mm long with brass unions and rubber washers on either side, for connecting water supply line to WHB, flushtank etc complete all as specified and directed by Engineer-in-Charge.
50
-
-
S&F in repairs Chromium plated Towel Holder Twin Type complete all as specified and directed by Engineer-in-Charge.
5
-
-
S&F in repair brass chromium plated over head shower rose with arm 125 mm size with long body with swivel joint including fixing to steel pipe or union, complete all as specified and directed by Engineer-in-Charge.
40
-
-
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engineer-in-Charge.
29.5
-
-
S&F Mild steel framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge.
455
-
-
S& F Mild steel work in tubular trusses including special shaped washers etc complete to IS 1161-1979 grade St-240 complete all as specified and directed by Engineer-in-Charge.
1250
-
-
S&F in repair Corner glass shelf high quality of 5mm thick glass with chromium plated railing with bracket complete all as specified and directed by Engineer-in-Charge.
10
-
-
S&F in repair Chromium plated high quality CP Towel Ring square with round flange fancy type complete all as specified and directed by Engineer-in-Charge.
10
-
-
S&F in repairs, 15mm Chromium plated two Way Bib Cock heavy duty complete all as specified and directed by Engineer-in-Charge.
10
-
-
Taking down existing chowkats or frames n.exc. 1.5 Sqm each but with shutters (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge.
25
-
-
Taking down existing chowkats exc. 1.5 Sqm and n.exc. 4 Sqm each without taking off shutter from the frame complete all as specified and directed by Engineer-in-Charge.
25
-
-
Taking down shutters resecuring and easing of any description exc. 1 Sqm and n.exc. 2.00 Sqm each and refixing the same opening complete all as specified and directed by Engineer-in-Charge.
25
-
-
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube as per manufacturer instructions complete all as specified and directed by Engineer-in-Charge.
120
-
-
S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face,complete all as specified and directed by Engineer-in-Charge.
40
-
-
S&F plain, solid, straight chowkats and frames of 2nd class hard wood, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge.
1.6
-
-
S&F glazed and skeleton shutters 30mm thick of 2nd class hard wood open rebated and prepared to receive glass, gauge etc. edges of framing plain chamfered or rounded fitted without and mitred beads for securing glass etc., divided into squares sizes of members of shutters as specified in SSR Part-I, section 8Clause 8.20(a) with sash bars any numbers complete all as specified and directed by Engineer-in-Charge.
40
-
-
S&F Factory made 35 mm thick, 2nd class hardwood plain, framed, panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part – I), Klin seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge.
50
-
-
M& L for Plain cement concrete type C-1, 1:3:6 Nominal mix using 20mm graded stone aggregate as in filling under hold fast as directed including necessary form work, complete all as specified and directed by Engineer-in-Charge.
1.8
-
-
M& L for treating with tar or coal tar black paint on back of chowkats, area tarred exec 0.1 Sqm but not exceeding 0.5 Sqm each treated with tar or coal for black paint complete all as specified and directed by Engineer-in-Charge.
30
-
-
M& L for treating small articles such as stop, covers, gully grating, hold fasts, and of posts , back of chowkats, etc area not exc 0.1 Sqm each treated with tar or coal tar black paint complete all as specified and directed by Engineer-in-Charge.
1.5
-
-
S&F in aluminium barrel tower bolts 100 mm size stove enamelled black, with bright bolt and fixed complete all as specified and directed by Engineer-in-Charge.
35
-
-
S&F aluminium barrel tower bolts 300 mm size stove enamelled black, with bright bolt and fixed complete all as specified and directed by Engineer-in-Charge.
40
-
-
S& F Aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) 300 mm size and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.
25
-
-
S & F 75 mm size, medium weight Butt Hinges, cold rolled, mild steel including fixtures complete all as specified and directed by Engineer-in-Charge.
50
-
-
S & F 100 mm size, medium weight Butt Hinges, cold rolled, mild steel including fixtures complete all as specified and directed by Engineer-in-Charge.
50
-
-
S&F bands, straps , supports or stays for rain water, ventilating pipes including bolts, clamps, hold fasts etc and similar small articles to Fe-410-0 or Fe-310-0 complete all as specified and directed by Engineer-in-Charge.
30
-
-
Taking down aluminium window /ventilator shutters of any size from the existing aluminium window / ventilators, adjusting the aluminium section members, oiling /greasing for easy functioning of windows and refixing the shutters including taking down MS grill and refixing in the existing frame complete all as specified and directed by Engineer-in-Charge.
50
-
-
S & F Powder coated ( thickness not less than 50 microns) Aluminium frames for partitions, doors Windows and Ventilators with one or more rebates including jointing cleat for fixing etc and aluminium ( thickness not less than 50 microns) skeleton windows & ventilator shutter fixed with glass or gauge, side hung type without sash bars using standard aluminium section including necessary jointing cleats, glazing clips, rubber packing anodised aluminium snap beadings screws, anodised aluminium fittings such as handles, stainless steel adjustable friction stay hinges etc including fixing of MS grills / aluminium grill, prelaminated particle boards, glazing to window frame aluminium wire cloth fixed to aluminium frame all as specified and directed by Engineer-in-Charge. NOTE: (i) Payment under this item will be made only for the cost of aluminium section. However unit rate quoted shall deemed to include cost of rubber beading, fittings such as handles, SS friction stay hinges and fixing of 5.5mm thick glass, prelaminated particle board and grills etc. (ii) Supply only sheet glass,particle board, aluminium wire cloth and aluminium grill shall be measured and paid separately. (iii) Weight of aluminium handle & SS hinges shall not be accounted for payment purpose .
205
-
-
Supply only 5.00 mm thick plain sheet glass complete all as specified and directed by Engineer-in-Charge.
50
-
-
Supply only Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staplesfor mosquito proofing complete all as specified and directed by Engineer-in-Charge.
40
-
-
Supply & fix in repairs Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples for mosquito proofing complete all as specified and directed by Engineer-in-Charge.
40
-
-
S & F False for seamless Ceiling Frame Work using GI perimeter channels of 0.55 mm thick, having one flange of 20 mm and another flange of 30 mm and web of 27 mm along the perimeter of the ceiling, fixed to wall with nylon sleeves and screws at 610x610 mm intervals, GI intermediate channels of size 45 mm X 15 mm X 0.90 mm supported with GI ceiling angles of size 25 mm X 10 mm X 0.55 mm fixed to soffits with steel expansion fasteners / GI cleats at 1220 mm intervals, ceiling section of 0.55 mm thick having knurled web of 51.5 mm and two flanges of 26 mm each with lips of 10.5 mm fixed to intermidiate channel with connecting clips and in direction perpendicular to the intermidiate channels at 457 mm centre to centre including fixing 6mm thick Asbestos cement building boards fixed to ceiling frame work including dismantling of old unserviceable false ceiling system.
Noteds (Rate included for necessary scaffolding to providing ceiling complete)
100
-
-
Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key complete all as specified and directed by Engineer-in-Charge.
200
-
-
M&L rendering 5mm thick in CM (1:4) over 10mm CM 1:6 on wall surfaces of walls of block masonry finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
150
-
-
M&L rendering 10mm thick in CM 1:6 on wall surfaces of walls of block masonry finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
150
-
-
M&L rendering 5mm thick in CM (1:3) on ceiling surfaces finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
50
-
-
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces cement complete all as specified and directed by Engineer-in-Charge.
Make : Apex Ultima
300
-
-
M&L preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by Engineer-in-Charge.
150
-
-
M&L for preparation of newly plastered ceiling surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by Engineer-in-Charge.
50
-
-
Material and labour for making arrangements for scaffolding in shafts/spot/locationof weed growth,spraying anti weed solution of Herabicide Glyphosate 41% orequivalent on plant /weed leaves without cutting/disturbing the plants on sunny weather and allow the plant /weed to dry for a period of 30 days and removing the weed incuding its root ,making good with CM 1:3 or with PCC 1:2:4(12.5mm graded aggregates)including 02 coats if acrylic paint complete all as specified and directed by Engineer-in-Charge.
20
-
-
Material and labour for filling cracks in wall, columns, beams etc by removing existing plaster and cutting grooves n.exc. 25cm girth and 25mm in depth cleaning and applying fosroc/ Asian paints crack filler finished even and smooth and applying two coats of oil bound distemper over a primer complete all as specified and directed by Engineer-in-Charge.
50
-
-
S & F in repairs Stainless Steel plate rack of size 910 mm X 960 mm of super deluxe model, suitable for 12 plates made with 22 gauge sheet and weight not less than 5.5 Kg, complete all as specified and directed by Engineer-in-Charge.
5
-
-
S& F in repairs Door closer hydraulically regulated (Aluminium die cast body ) designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed by Engineer-in-Charge.
15
-
-
S&F in repairs 140 mm Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in floor complete all as specified and directed by Engineer-in-Charge.
20
-
-
S&F in repairs 140 mm Floor door stopper brass body and tongue, anodised,with hard drawn steel spring,fixed in floor complete all as specified and directed by Engineer-in-Charge.
10
-
-
S&F in repairs 20mm dia curtain rails, Harrison rails, mild steel, chromium plated with fixing brackets stops, rollers etc complete all as specified and directed by Engineer-in-Charge.
75
-
-
S&F in repairs Chromium plated/ brass brackets for fixing of curtain rods complete all as specified and directed by Engineer-in-Charge.
35
-
-
S&F in repairs 100 mm size mild steel Mortice lock 4 lever vertical type complete all as specified and directed by Engineer-in-Charge.
5
-
-
S&F in repairs 100 mm size brass type Mortice lock 4 lever vertical type complete all as specified and directed by Engineer-in-Charge.
5
-
-
S&F in repairs peg set 6 & 4 fixing with wall / tiles / in any description complete all as specified and directed by Engineer-in-Charge.
25
-
-
Supply and fixing in repairs only stainless steel friction stay hinges of standard size complete all as specified and directed by Engineer-in-Charge.
30
-
-
S & F in repairs Aluminium alloy anodised Sliding Door Bolt with hasp and staple [Bolt Type] of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engineer-in-Charge.
30
-
-
S & F in repairs Aluminium anodised Handle, of extruded section Fabricated Type of size 150mm long complete all as specified and directed by Engineer-in-Charge.
30
-
-
S&F in repairs aluminum handles for window aluminum 100mm long extruded aluminum alloy anodised fixed to window in position left or right complete all as specified and directed by Engineer-in-Charge.
30
-
-
S & F in repairs 75 mm size, medium weight Butt Hinges, cold rolled, mild steel including fixtures complete all as specified and directed by Engineer-in-Charge.
30
-
-
S & F in repairs 100 mm size, medium weight Butt Hinges, cold rolled, mild steel including fixtures complete all as specified and directed by Engineer-in-Charge.
30
-
-
S&F in repair continuous (Piano) hinges, mild steel bright finished or electro galvanised with flap size 30mm complete all as specified and directed by Engineer-in-Charge.
45
-
-
S & F in repair Hasp and staple for 75 mm of aluminium anodised complete all as specified and directed by Engineer-in-Charge.
30
-
-
S&F in repairs using plywood, grade BWP, type BB 12mm thick 7 No of ply fixed with nails to timber frames as in pelmet boxes and similar works etc complete all as specified and directed by Engineer-in-Charge.
20
-
-
S&F in repair 18 mm thick MDF Pre-laminated particle board interior grade one side with decorative choice laminations and other side balancing white lamination fixed in cup board shutter, shelves, partitions and similar items including dismantling and all necesary fittings complete all as specified and directed by Engineer-in-Charge.
15
-
-
S&F in repairs aluminium barrel tower bolts 100 mm size stove enamelled black, with bright bolt and fixed complete all as specified and directed by Engineer-in-Charge.
25
-
-
S&F in repairs aluminium barrel tower bolts 300 mm size stove enamelled black, with bright bolt and fixed complete all as specified and directed by Engineer-in-Charge.
25
-
-
Dismantling of tiles of any description or thickness in floor, hearth or wall including cement mortar bedding, removing debris off the premises complete all as specified and directed by Engineer-in-Charge.
579
-
-
M&L for non-skid ceramic coloured tiles 7 to 8mm thick(square/rectangular)area of each tile exceding 0.06 Sqm but not exceeding 0.11sqm ,in floors etc set and jointed in cement slurry and pointed in coloured cement to match over a screed bed of 15mm thick in CM 1:4 complete all as specified and directed by Engineer-in-Charge.
180
-
-
M&L non skid cermic coloured tiles 7 to 8mm thick ( square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floor etc and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile over a screed bed of 15mm thick in CM 1:4 complete all as specified and directed by Engineer-in-Charge.
180
-
-
All as per item no.91 above but on vertical surfaces such as skirtings, dados and risers to steps over 10 mm thick backing coat complete all as specified and directed by Engineer-in-Charge.
35
-
-
S & F in repairs 10 Liters capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe of complete all as specified and directed by Engineer-in-Charge.
25
-
-
Supply and fix in repairs Figured glass 5 mm,pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge.
20
-
-
S&F in repair 100 mm dia CP grating incl joints with solvent cement complete all as specified and directed by Engineer-in-Charge.
30
-
-
S&F in repairs vitreous china wash down water closet pan pedastel pattern (EWC) white in colour with and including plastic water seat and cover white closed pattern with flat bottom and cover and MS chromium plated hinging device incl connection to outgoing pipe and flushing pipe complete all as specified and directed by Engineer-in-Charge.
3
-
-
S&F in repairs vitreous china wash down water closet pan pedastel pattern of size 770x380x660 (EWC)(couple Closet) white in colour with and including Soft close Seat cover white closed pattern with flat bottom and cover and MS chromium plated hinging device incl connection to outgoing pipe and flushing pipe complete all as specified and directed by Engineer-in-Charge.
2
-
-
Fixing only in repairs concealed stop cock of any type and size after cleaning and removing of washer of blockage complete all as specified and directed by Engineer-in-Charge.
25
-
-
S&F in repairs stainless steel sink with drainage board made out of 1.00 mm thick sheet with plug, washers, Ms angle cantilever brackets for suitable size and connecting union to pipe of overall size 914 mm x 460 mm and bowl size 410mm x 330 mm x 160 mm complete all as specified and directed by Engineer-in-Charge.
4
-
-
S&F in repairs PVC seat cover white closed pattern for EWC of standard size complete all as specified and directed by Engineer-in-Charge.
20
-
-
S&F in repairs 600mm x 450mm mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood fixed to wooden plugs with chromium plate brass screws and cup washers complete all as specified and directed by Engineer-in-Charge.
20
-
-
S&F in repairs tubular towel rail of 20mm dia of 60cm in length, D shaped bracket brass chromium plated including brackets complete all as specified and directed by Engineer-in-Charge.
20
-
-
S & F in repair anodized aluminum door seals of 32mm (overall size) with standard 1mm thick aluminum sections and bottom brush and provision of counter sunk holes for screws etc complete all as specified and directed by Engineer-in-Charge.
45
-
-
S&F in repair 25mm dia stainless steel powder coated curtain rails with fixing brackets in both ends c complete all as specified and directed by Engineer-in-Charge.
45
-
-
S&F in repair decorative globes for curtain rails to be fixed at both end complete all as specified and directed by Engineer-in-Charge.
40
-
-
S&F 5mm thick PVC sheet of any pattern as in strips & channels feathered at edges for fixing to wall and ceiling lining inclusive of solvent cement and fixing at site etc including dismantling of boarding complete all as specified and as directed by Engineer-in-charge.
45
-
-
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing including dismantling of old unserviceable boarding complete all as specified and as directed by Engineer-in-charge.
60
-
-
M&L for Plates (Plain or Chequered) channels, square or notched (Ordinary and counter sunk) forming holes, without any attachment of Fe 290 (Gde E-165) completely all as specified and as directed by Engineer in Charge.
110
-
-
Dismantling Plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings in roof covering all as specified.
285
-
-
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws asspecified complete all as manufacturers instruction and as directed.
250
-
-
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing all as specified and as directed.
35
-
-
S&F Aluminium wind ties for roof including all necessary drilling, bolting or rivetting fixed with GI self tapping screws as specified for roof sheeting.
88
-
-
Demolition of cement Concrete(unreinforced) incl tiles and pavings n exc 15 cm thickness (below or above ground level)
45.73
-
-
M&L 75mm thick Plain Cement Concrete 1:4:8 type D2 Nominal mix, (using 40mm graded stone aggregate) as in flooring finished even and fair without using extra cement complete all as specified and as directed by Engineer-in-charge
270
-
-
M&L 40mm thick Plain Cement Concrete 1:2:4 type B-1,nominal mix (using 20mm graded stone aggregate) as in flooring finished even and fair without using extra cement complete all as specified and as directed by Engineer-in-charge
140
-
-
M&L 75 mm thick Plain Cement Concrete 1:3:6 type C2 nominal mix using 40mm graded stone aggregate laid in panels surface finish even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge
285
-
-
M&L for chequred cement concrete tiles mixed with grey cement and no pigment of size 300x 300 x25 mm thick set jointed and pointed in neat cement slurry in floors incl 15 mm thick screed in CM 1:4 complete all as specified and as directed by Engineer-in-charge
270
-
-
S&F in repair Drawer handles cast iron or mild steels projecting drop (50 mm to 65mm) on screwed plate complete all as specified and as directed by Engineer-in-charge
20
-
-
S&F in repair Drawer brass handles projecting drop (50 mm to 65mm) on screwed plate complete all as specified and as directed by Engineer-in-charge
20
-
-
S&F in reapir cast iron mild steel Drawer pulls, 3 screw plate with fixed dished pull 80 mm to 100mm long complete all as specified and as directed by Engineer-in-charge
20
-
-
S& F in repairs Ball catches with 8mm dia steel ball, and bras body and striking plate including letting in and fixed complete all as specified and as directed by Engineer-in-charge
10
-
-
S&F in repair Locks, drawer, grade I, size 50mm 4 levers brass lock complete all as specified and as directed by Engineer-in-charge
10
-
-
M & L for virtified ceramic tiles 10mm thick rectangular)polished heavy duty vertified tiles 300x300 size infloors etc,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screedbed in CM( 1:4) complete all as specified and as directed by Engineer-in-charge
10
-
-
M&L Glazed ceramic tiles in vertical surface 300X200X7mm thick as dadoes, skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match and over 10mm thick Screed in CM 1:3 complete all as specified and as directed by Engineer-in-charge
160
-
-
M&L for Light shade Virified Ceramic tiles 10 mm thick (square/ ectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl Screed bed or bedding layer with CM 1:4 15mm thick for laying floor finishes complete all as specified and as directed by Engineer-in-charge
14
-
-
Supply only 12mm thick Prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations, fixed with screws to aluminium frame work complete all as specified and as directed by Engineer-in-charge
30
-
-
Material and Labour for cutting holes in brick walls, one brick thick wall in cement mortar for inserting hold fast and making good dismantles portion in CM 1:3 or PCC (1:2:4) type B-1 complete all as specified and as directed by Engineer-in-charge
40
-
-
S&F 20 mm outer dia CPVC pipe brass elbow complete all as specified and as directed by Engineer-in-charge.
15
-
-
S&F 20 mm outer dia CPVC pipe brass elbow (3/4 X 1/2) complete all as specified and as directed by Engineer-in-charge.
15
-
-
S&F 20 mm outer dia brass Tee complete all as specified and as directed by Engineer-in-charge.
15
-
-
S & F 20 mm Male Brass Threaded Adaptor (MT A/ MBT A) complete all as specified and as directed by Engineer-in-charge.
15
-
-
S & F 20 mm Female Brass Threaded Adaptor (FTA/ FDT A) complete all as specified and as directed by Engineer-in-charge.
15
-
-
S & F 20 mm Union complete all as specified and as directed by Engineer-in-charge.
15
-
-
S & F 20 mmBrass CPVC Tank Adaptor complete all as specified and as directed by Engineer-in-charge.
5
-
-
S & F 25 mm Male Brass Threaded Adaptor (MT A/ MBTA) complete all as specified and as directed by Engineer-in-charge.
10
-
-
S & F 25 mm Female Brass Threaded Adaptor (FTA/ FDTA) complete all as specified and as directed by Engineer-in-charge.
10
-
-
S&F 25 mm outer dia brass Tee complete all as specified and as directed by Engineer-in-charge.
10
-
-
S & F 25 mm Union complete all as specified and as directed by Engineer-in-charge.
10
-
-
S & F 25 mmBrass CPVC Tank Adaptor complete all as specified and as directed by Engineer-in-charge.
5
-
-
S&F 25 mm outer dia CPVC pipe brass elbow complete all as specified and as directed by Engineer-in-charge.
15
-
-
S & F 32 mm Male Brass Threaded Adaptor (MT A/ MBT A) complete all as specified and as directed by Engineer-in-charge.
15
-
-
S & F 32 mm Female Brass Threaded Adaptor (FTA/. FDT A) complete all as specified and as directed by Engineer-in-charge
15
-
-
S & F 32 mm Union complete all as specified and as directed by Engineer-in-charge.
15
-
-
S & F 32 mmBrass CPVC Tank Adaptor complete all as specified and as directed by Engineer-in-charge.
15
-
-
S&F 32 mm outer dia brass Tee complete all as specified and as directed by Engineer-in-charge.
10
-
-
S&F 32 mm outer dia CPVC pipe brass elbow complete all as specified and as directed by Engineer-in-charge.
10
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements